Your Source for Residential & Commercial Hardware and More

Total Page:16

File Type:pdf, Size:1020Kb

Your Source for Residential & Commercial Hardware and More YOUR SOURCE FOR RESIDENTIAL & COMMERCIAL HARDWARE AND MORE Commercial Doors, Frames & Finish Hardware Services to Match Your Needs Take Offs | Submittals | Catalog Cuts | Pre-Installed Hardware Seattle | Bellevue | Kennewick | Portland | Builders-hardware.com 206-281-3700 • Sales 800-207-2297 • Sales Fax (206) 281-3730 • [email protected] DECORATIVE CABINET FUNCTIONAL CABINET RESIDENTIAL LOCKS RESIDENTIAL DOOR HARDWARE BATH ACCESSORIES HARDWARE HARDWARE Acorn Manufacturing Armor Concepts Acorn Manufacturing Bainbridge Manufacturing Amerock Ashley-Norton Deltana Amerock Deltana Bobrick Commercial Washroom Baldwin Don-Jo Atlas Homewares Epco Bravura Bravura Doorsaver B&M Hardware Fastcap Colonial Bronze Dexter by Schlage Emtek Baldwin Grass Creations by Alno Emtek Hafele Berenson Hafele CSI Donner FSB Home Protector Cal Crystal Ives Emtek Fusion Ives Colonial Bronze Julius Blum Franklin Brass Grandeur by Nostalgic Latch Gard Du Verre KV RK International Hoppe Modern Mfg. Earth to Peter National Cabinet Locks Rocky Mountain Hardware Ilco-Unican Taymor Emenee Olympus Cabinet Locks Samuel Heath Inox Emtek Selby Slide Co. Karcher Designs Epco Slide Co. Smedbo Merit Metal Hafele Sugatsune Sugatsune Nostaglic Warehouse HINGES Linnea Sun Valley Bronze Omnia Industries Amerock Omnia Industries Taymor Rocky Mountain Hardware Bommer RK International Top Knobs Samuel Heath Deltana Rocky Mountain Hardware Tubular Specialties Schlage Hager Schaub & Company Stanley Ives Sietto Designs Sun Valley Bronze McKinney Mfg. Top Knobs Valli & Valli Orca Hardware Valli & Valli Select Soss Hinges Stanley Hardware HOME HARDWARE DOOR TRACK WINDOW HARDWARE GLUES, CAULKS, ADHESIVES, AND SAFETY & SHOP SUPPLIES Beaverwood Products Hafele Blaine Window Hardware PAINT SUNDRIES Cindoco Hager Deltana Color Putty 3M Deltana Johnson Duplex, Inc. Elmer’s Glues Continental Western FSB Leatherneck Ives Fastcap Edgemate Ives Orca Hardware Samuel Heath Jen Manufacturing EPS (Stretch Wrap) Masterlock PC Henderson Slide Co. Fastcap Norwesco Richards-Wilcox Truth MSA Safety Rocky Mountain Hardware Stanley Vincent Whitney Selby Wright Products Smedbo Spore Stanley Hardware THRESHOLDS VENTILATION PRODUCTS SPECIALTY DOORS Sun Valley Bronze & WEATHERSTRIP Supra Pemko Norwesco Elmdor Access Doors Truth Woodfold Folding Doors CLOSET & SHELVING GATE HARDWARE SCREWS & FASTENERS HAND TOOLS HARDWARE Abbey Trading Gatemate Arrow Fasteners Epco Arnott Tool Harrington Tools Acorn Manufacturing Fastap Fastcap Barwalt Tool Co. Olfa EZ Gate Latch Pull Hafele Century Drill & Tool Stanley Tools Stanley Hardware Hager Fastcap Vick, S.E., Co. KV Stanley Hardware Sterling Taymor COMMERCIAL DOOR CLOSERS COMMERCIAL LOCKS & HARDWARE & EXIT DEVICES DOORS & FRAMES Accurate Lock Kaba ACSI Ceco Hollow Metal Adams Rite Keri Systems Corbin Russwin VT Industries Alarm Lock Kroy Architectural Signs Falcon Allegion Marlok LCN Assa Abloy Masterlock Norton Best Medeco Orca Hardware BiLock New Standard Padlocks Precision Bommer Mailboxes OSI Security Rixson Corbin Russwin Orca Hardware Stanley Detex Rixson-Firemark Taymor Door Controls Rockwood Von Duprin Falcon Schlage Yale Florenclif Stamp Securitron Folger Adams Simplex Security Systems HES Trimco Ives Yale www.builders-hardware.com.
Recommended publications
  • PPI Detailed Report: Data for July 2008
    PPI Detailed Report Data for July 2008 Editors Vol. 12, No. 7 Joseph Kowal William Snyders Antonio Lombardozzi Contents Page Producer Price Indexes, July 2008 ...……………………………………………………………….......................... 1 Resampling of Industries ……………………………………………………………………………………………. 5 Producer Price Indexes Introduced for the Nonresidential Building Construction Sector – NAICS 23811X, 23816X, 23821X, and 23822X ……………..……………………………………………………………...………… 6 Charts Finished goods ……………………………………………………………………………………………... 8 Intermediate goods ………………………………………………………………………………………… 9 Crude goods ………………………………………………………………………………........................... 10 Tables Producer Price Indexes 1. Stage of processing ……………………………………………………………………………………… 11 2. Selected commodity groupings by stage of process …………………………………….......................... 12 3. Selected stage of processing groupings, seasonally adjusted …………………………………………… 16 4. Net output of selected industries and industry groups …………………………………………………... 17 5. Net output of selected industries and their products …………………………………………………….. 19 6. Commodity groupings and individual items …………………………………………………………….. 111 7. Durability of product …………………………………………………………………………………….. 151 8. Special commodity groupings …………………………………………………………………………… 152 9. Material and supply inputs to construction industries…………………………………………………… 154 10. Industry and industry-classified product indexes recoded, effective July 2008 ………………………… 155 11. New industry and industry-classified product indexes introduced into the Producer Price Index, effective
    [Show full text]
  • Distribution of Sales of Manufacturing Plants
    SALESF O MANUFACTURING PLANTS: 1929 5 amounts h ave in most instances been deducted from the h eading, however, are not representative of the the total sales figure. Only in those instances where total amount of wholesaling done by the manufacturers. the figure for contract work would have disclosed data 17. I nterplant transfers—The amounts reported for individual establishments, has this amount been under this heading represent the value of goods trans left in the sales figure. ferred from one plant of a company to another plant 15. I nventory.—The amounts reported under this of the same company, the goods so transferred being head representing greater production than sales, or used by the plant to which they were transferred as conversely, greater sales than goods produced, are so material for further processing or fabrication, as con— listed only for purposes of reconciling sales figures to tainers, or as parts of finished products. production figures, and should not be regarded as 18. S ales not distributed.—In some industries, actual inventories. certain manufacturing plants were unable to classify 16. W holesaling—In addition to the sale of goods their sales by types of customers. The total distrib— of their own manufacture, some companies buy and uted sales figures for these industries do not include sell goods not made by them. In many instances, the sales of such manufacturing plants. In such manufacturers have included the sales of such goods instances, however, the amount of sales not distributed in their total sales. The amounts reported under is shown in Table 3.
    [Show full text]
  • Annual Report of 2019-2020
    Chairman Mahesh Kantilal Desai Vice Chairman Arun Kumar Garodia Executive Director Suranjan Gupta Addl. Executive Director & Secretary Adhip Mitra Auditors M/s. Ranjit Jain & Co. Diamond Heritage, Unit No.H605A, 6th Floor, 16 Strand Road Kolkata 700001 Registered & Head Office Vanijya Bhavan (1st Floor) International Trade Facilitation Centre 1/1 Wood Street, Kolkata-700 016 1 Suranjan Gupta Adhip Mitra Executive Director Addl. Executive Director & Secretary H.O. (Cell) Registered & Head Office Vandhna (4th Floor),11 Tolstoy Marg Vanijya Bhavan (1st Floor) New Delhi-110 001 International Trade Facilitation Centre Tel : 91-11-23353353, 23711124/25 1/1 Wood Street, Kolkata-700 016 Fax : 91-11-23310920 Tel : 91-33-22890651/52/53, Fax : 91-33-22890654 E-mail : [email protected] E-mail : [email protected] Mumbai New Delhi Dr. Rajat Srivastava Rakesh Suraj Regional Director & Director (Marketing and Sales) Regional Director EEPC INDIA EEPC INDIA B-202 & 220, Aurus Chambers Flat No. 10 P, Q, N, 10th Floor Annex "B", 2nd Floor, Behind Mahindra Tower DCM Building, 16 Barakhamba Road S.S. Amrutwar Marg, Worli, Mumbai-400 013 New Delhi-110 001 Tel : 91-22-42125555 Tel : 91-11-23314171/74 Fax : 91-22-42125556 Fax : 91-11-23317795 E-mail : [email protected] E-mail : [email protected] Bengaluru J.V. Raja Gopal Rao Sr. Deputy Director EEPC INDIA Embassy Square 103, First Floor No.148, Infantry Road, Bengaluru-560 001 Tel : 91-80-22261396 / 22268669 Fax : 91-80-22266914 E-mail : [email protected] 2 PAGE CONTENTS 5 REPORT OF THE WORKING COMMITTEE 10 ANNEXURE TO THE WORKING COMMITTEE REPORT 16 EXPORT PERFORMANCE 21 PROMOTIONAL ACTIVITIES 57 SIGNING OF MOUS 60 SEMINARS / CONFERENCES / MEETINGS IN INDIA 66 POLICY MATTERS 72 LIST OF ANNEXURES 91 WORKING COMMITTEE 96 OFFICE BEARERS 97 COMMITTEE OF ADMINISTRATION 98 INDEPENDENT AUDITOR’S REPORT & ACCOUNTS 3 Former Chairmen of EEPC India 1955-56 Late D.N.
    [Show full text]
  • Builders' Hardware (Nontemplate) (Second Edition)
    CS22-40 Hardware; Builders* (Nontemplate) U. S. DEPARTMENT OF COMMERCE HARRY L. HOPKINS, Secretary NATIONAL BUREAU OF STANDARDS LYMAN J, BRIGGS, Director BUILDERS^ HARDWARE (NONTEMPLATE) (SECOND EDITION) COMMERCIAL STANDARD CS22-40 (Supersedes CS22-30) Effective Date for New Production from July 1, 1940 A RECORDED VOLUNTARY STANDARD OF THE TRADE UNITEa> STATES GOVERNMENT PRINTING OFFICE WASHINGTON ; 1940 For sale by the Superintendent of Documents, Washington, D. C. Price 10 cents U, S. Department of Commerce National Bureau of Standards PROMULGATION of COMMERCIAL STANDARD CS22-40 for BUILDERS’ HARDWARE (NONTEMPLATE) (Second Edition) I The first general conference of producers, distributors, and users I held at the Department of Commerce, May 20, 1924, resulted in the I publication of Simplified Practice Recommendation No. 18, Builders’ Hardware, effective January 1, 1925. On the recommendation of the first revision conference in New York City on September 14, 1926, with the approval of the standing committee, and subsequently | accepted by the trade, there was published Simplified Practice Recom- j) mendation No. 18, Builders’ Hardware (first revision, September 14, i 1926), effective May 1, 1927. I On May 7, 1929, the Advisory Committee on Standardization of 1 Builders’ Hardware, with the approval of the standing committee, adopted additional nomenclature, types, sizes, standard finishes, and I practices, which, after written acceptance by the trade, were published as Builders’ Hardware (Nontemplate), Commercial Standard CS22-30, effective for new production from June 1, 1930. On April 16, 1940, upon recommendation of the Advisory Com- 1 mittee on Standardization of Builders’ Hardware and with the endorse- ment of the standing committee, a further revision was circulated to the trade for written acceptance.
    [Show full text]
  • BUILDERS HARDWARE LIST PRICES October 2017
    BUILDERS HARDWARE LIST PRICES October 2017 CAL-ROYAL PRODUCTS, INC. 6605 Flotilla St., Commerce, California 90040 USA TEL: (323) 888-6601 FAX: (323) 888-6699 Website: www.cal-royal.com Email: [email protected] BUILDERS HARDWARE PART NUMBER OCT 2017 TABLE OF CONTENTS I. NUMBERS AND LETTERS VII. DOOR GUARDS House Letters (A-E), Diecast............................................ DH1 Door Angle Protector................................................ DH9 House Letters (A-F), Diecast............................................. DH1 Door Guard Shim..................................................... DH9 House Number 0-9, Diecast.............................................. DH1 VIII. SLIDING DOOR LOCKS Letters A-F, Solid Brass.................................................... DH1 Privacy Sliding Door Locks, Heavy Duty................. DH10 Letters A-Z, Solid Brass.................................................... DH1 Passage Sliding Door Locks, Heavy Duty............... DH10 Number 0-9, Solid Brass................................................... DH1 Privacy Sliding Door Locks...................................... DH10-DH11 II. MISCELLANEOUS DOOR AND WINDOW Passage Sliding Door Locks.................................... DH10-DH11 HARDWARE Dummy Sliding Door Locks...................................... DH11 Window Casement Fasteners........................................... DH2 IX. SECURITY BOLTS ASA Blank Filler Plate....................................................... DH3 Decorative Dutch Door Bolts, Solid Brass..............
    [Show full text]
  • BUILDERS' HARDWARE ~ \) ~ Paragra;Eh Page ~
    TA 7 .W34tmnl no.5-805-8 1968 l RTMENTS OF THE ARMY AND OCTOBER 1968 ■IM .- "½- ~u.-ua<J • ~~~ JO 11-eaJn8 £ 030 ) * TM 5-805-8 * AFM 88-.4, Chap. 2. TEOiNICAL MANUAL DEPARTMENTS OF THE ARMY •..S No. 5-805-8 AND TiiE AIR FORCE try AIR FORCE MANUAL ..::, No. 88-4, Chapter 2 Washington, D.C., 10 October 1968 ~ BUILDERS' HARDWARE ~ \) ~ ~ . Paragra;eh Page Purpose and Scope .................... ................... 1 3 Illustrations ..... .. .. ............................. .... 2 3 General ................ e: •••••••••••••••••••• • •••••••••••••• 3 3 Handing of Door . .......................................... 4 3 Hardware Reinforcement . .. ·....... ......................... 5 4 Butts and Hinges . ......................................... 6 4 Locksets, Latchsets, and Deadlocks •••••.•••.•• , ••••.••..•.• 7 7 Exit or Panic Devices ....................... ............. 8 8 Operating Trim . .......... ·...... .......................... 9 13 Door Closing Devices .. ....... ·....................... ..... 10 1S Door Centro ls . .............. ii · •••••••••••••••••••••••••••••• 11 18 Stops and Holders ... .......... ...................... .. ~. 12 18 Protective Plates ......................................... 13 20 Thresholds . .................. .... ...................... • .. 14 21 ~ ·.................... 15 21 Ot, Miscellaneous . ...... ................. • Hardware for Fire-Rated Doors • •• •• •••• ••••• • ••••••..• • ••••• 16 22 ~ Finishes of Hardware .•••• , •.•. • .• • ..••.•••••••.•••••• . ••.• • 17 23 Keying . .................. .....•.............•............
    [Show full text]
  • F:\Land Use Codes\Land Use Codes
    Provo City Land Use Codes - Numerical Order (Note: NEC stands for Not Elsewhere Classified) Living Areas 1000 1100 Household Units .....................................................1100 Single Family Dwelling ...................................................1110 Boarding house with four or fewer boarders ....................................1111 Cabins, periodic use, non commercial .........................................1111 Farm homes.............................................................1111 Household units, single family, detached ......................................1111 Ranch or farm dwelling ....................................................1111 Rooming house with 4 or less roomers ........................................1111 Single family dwelling, detached, with or without garage on one parcel ..............1111 Single family housing unit, detached ..........................................1111 Single family dwelling, attached, one or more single family dwelling, each separate parcel .................................................1112 Single family dwelling attached to nonresidential use, commercial or industrial ........1113 Mobile home single family dwelling on parcel with other household units ............1114 Single family dwelling, mobile home on same parcel as residential use ..............1114 Mobile home single family dwelling on parcel with nonresidential structure or use .....1115 Single family dwelling, mobile home on same parcel as nonresidential unit ...........1115 Mobile home single family dwelling
    [Show full text]
  • Part B: Builders Hardware EPD Requirements
    1 Part B: Builders Hardware EPD Requirements www.ul.com PCR for Building-Related Products and Services: Builders Hardware EPD Requirements 2 Publisher: 3 UL Environment 4 5 Tracking of versions Version Comments History Creation of PCR Part B for Builders Hardware Products to conform with ISO 21930: 2017 and UL Part A. This PCR has 1.0 been updated to align with international xxxxxx, 2019 standards with the intent of allowing manufacturers to create EPDs which are global in scope. 6 © UL Environment 7 This PCR is valid for a period of five (5) years, set to expire in xxxxxxxx, 2024. 8 I. Background Information and Acknowledgements 9 These sub-category Product Category Rules (PCR) were developed to address the product specific rules 10 for the creation of Environmental Product Declarations (EPD) for “builders hardware” and includes all 11 commercially available products under the ANSI/BHMA A156 series of standards except for A156.10, 12 A156.18, A156.27, A156.28, A156.32, A156.115, and A156.115-W, collectively referenced throughout this 13 PCR as “builders hardware”. When used to self-reference this document, “PCR” refers to “sub-category 14 PCR.” 15 Other PCRs considered in the development of this PCR update include: 16 ● Part A: Life Cycle Assessment Calculation Rules and Report Requirements UL Environment 17 December 2018, version 3.2) 18 ● ISO 21930: 2017 - Sustainability in building construction -- Environmental declaration of building 19 products 20 ● EN 15804: 2012-04 - Sustainability of construction works - Environmental Product Declarations - 21 Core rules for the product category of construction product.
    [Show full text]
  • JULY 2019 HOUSTON Builder
    The Official Magazine of the Greater Houston Builders Association • www.ghba.org JULY 2019 HOUSTON Builder ALSO INSIDE: Texas Legislative Session Recap pg 10 GHBA Scholarship Benefits Deserving Students pg 18 HistoryMaker Homes Breaks Ground on Benefit Home pg 20 NOW OPEN IN HOUSTON New premier destination for all things bath, kitchen and lighting page 17 Mention this ad to receive 5% off your first order! J & K CABINETRY Houston Quality Wholesale Cabinets FOR BUILDERS, DESIGNERS, CONTRACTORS AND RETAILERS ONLY Solid Maple Fronts, Doors and Drawers Dovetailed Solid Maple Doors 6-Way Soft Close European Hinges 5/8" -Thick Plywood Boxes Heavy Duty Full Extension Solid Maple Trim Soft Close Drawer Guides All Sides Finished Quick Turnaround 6615 ROXBURGH DRIVE #100 HOUSTON, TEXAS 77041 713-466-3800 | jandkcabinetry.com 3-10 Day Lead Time [email protected] NEW THERMAPREMIUM ThermaPremium Steel Doors Steel Doors w/ Thermal Break With Thermal Break LUXURY FOR LESS THE PRICE: Buffalo Forge ThermaPremium entryways are enhanced with a complete thermal break solution in doors, frames, and glass. Available in 3 Design Series: Wrought Iron, Contemporary, and Privacy Glass. THERMALLY BROKEN Why ThermaPremium Steel Doors? ThermaPremium is GlassCraft’s high-end steel door product line packed with premium features for less the price of other high-end brands. Enhanced with a complete thermal break solution, ThermaPremium steel doors help improve energy efficiency and comfort in the home when you need them the most. These steel doors won’t form frost or condensation during extreme weather, while other competing brands will. Premium in every detail, ThermaPremium offers luxurious features including stunning designs, unique operable glass, beautiful finishes, Endura threshold and multiple glass textures.
    [Show full text]
  • Sliding Door Kits & Hardware
    Sliding Door Kits & Hardware Hardware Styles | Brands Quick Ship | Various Price Points SEATTLE KENNEWICK PORTLAND BELLEVUE 1516 15th Ave W 114 S Auburn St 5043 NW Front Ave 1038 116th Ave NE, #310 Seattle, WA 98119 Kennewick, WA 99336 Portland, OR 97210 Bellevue, WA 98004 206-281-3700 509-586-8110 503-688-1921 425-679-5115 Order Desk: 800-207-2297 • [email protected] builders-hardware.com SLIDING DOOR KITS & HARDWARE • Pocket doors, Bypass doors & Bi-fold doors • Interior applications • Variety of weight capacities available • $ • Pocket doors, Bypass doors & Bi-fold doors • Interior applications • Variety of weight capacities available • $ - $$ • Galvanized steel barn door hardware • Interior and exterior applications • Wall-mounting brackets available • Purchase components separately • $$ - $$$ • Barn door hardware • Interior applications • Full door kits and separate components available • Satin Stainless Steel and powder-coated finishes • $$ - $$$ • Pocket door hardware • Interior applications • Soft-close styles available • Wall-mounting brackets available • $$$ - $$$$ • Barn door hardware • Interior or exterior applications • Full door kits and separate components available • Powder-coated finishes, many others available • $$$ - $$$$ • Interior or exterior applications • Powder-coated and galvanized finishes available • Mounting hardware and accessories • $$$ - $$$$$ Distributed by Page 25 Other finish options may be available. Please call for pricing & lead times. SLIDING DOOR KITS & HARDWARE Questions to ask yourself
    [Show full text]
  • Section 08710 Builders Hardware
    07-05M SECTION 08710 BUILDERS HARDWARE PART 1 - GENERAL 1.1 DESCRIPTION Builders' hardware and related items necessary for complete installation and operation of doors. 1.2 RELATED WORK A. Caulking: Section 07920, SEALANTS AND CAULKING. B. Application of Hardware: Section 08210, WOOD DOORS; Section 08110, STEEL DOORS AND FRAMES; Section 08331, OVERHEAD ROLL-UP GRILLS; Section 08721, AUTOMATIC DOOR OPERATORS C. Finishes: Section 09050, INTERIOR/EXTERIOR FINISHES, MATERIALS, AND FINISH SCHEDULE. D. Painting: Section 09900, PAINTING. 1.3 GENERAL A. All hardware shall comply with UFAS, (Uniform Federal Accessible Standards) unless specified otherwise. B. Hardware for Labeled Fire Doors and Exit Doors: Conform to requirements of NFPA 80 for labeled fire doors and to NFPA 101 for exit doors, as well as to other requirements specified. Provide hardware listed by UL, except where heavier materials, large size, or better grades are specified herein under paragraph HARDWARE SETS. In lieu of UL labeling and listing, test reports from a nationally recognized testing agency may be submitted showing that hardware has been tested in accordance with UL test methods and that it conforms to NFPA requirements. C. Deadlocks specified for psychiatric area doors are not required to have "UL" label. D. Hardware for application on metal and wood doors and frames shall be made to standard templates. Furnish templates to the fabricator of these items in sufficient time so as not to delay the construction. E. The following items shall be of the same manufacturer, if possible, except as otherwise specified: 1. Mortise locksets. 2. Hinges for hollow metal and wood doors.
    [Show full text]
  • Basic Technical Fundamentals of Builders Hardware Exit Devices
    Basic Technical Fundamentals of Builders Hardware Exit Devices Copyright © 2002, 2009, 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. Table of Contents Page SARGENT History ................................................... 1 What is an Exit Device? ............................................. 2 History of Exit Devices .............................................. 3 Doors – (A Brief Review) ............................................ 4 Doors – Single Doors, Pairs of Doors ................................. 5 History of the Federal Specifications and ANSI/BHMA Standards ... 6, 7 Exit Devices in General .............................................. 8 Rim Exit Device ..................................................... 9 Mortise Lock Exit Device ........................................... 10 Surface Vertical Rod Exit Device .................................... 11 Mechanical Function ............................................... 12 Outside Trim ...................................................... 12 Some Abbreviations Used in the Builders Hardware Field ........... 13 2002, 2009, 2015, , Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. © Copyright Reproduction in whole or part without the express written permission of Sargent Manufacturing Company is prohibited. 1-800-727-5477 • www.sargentlock.com 11/15 Basic Technical Fundamentals of Builders
    [Show full text]