View Data Sheet
Total Page:16
File Type:pdf, Size:1020Kb
SUPERIOR TREATMENT SUITE FOR HEATING AND COOLING SYSTEM WATER ENDORSED FOR VEXOTM X-PO10 www.VEXOint.com How neglecting your hydronic thermal fluid can affect your bottom line Your investment reduces as dirty system water slowly erodes your OPEX and reputation. YOUR INVESTMENT Erosion corrosion Reduction in efficacy of inhibitor Harbouring bacteria proliferation Settlement of sediment Non-repeatable commissioning readings Delayed project handovers Landlord losing tenants could lead to litigation Efficiency losses PROGRESSIVELY LESS ROI Lifecycle losses Damage to reputation WHAT’S LEFT OF YOUR INVESTMENT Page 2 VEXO Additives Ver. 1.0 11/06/2021 Why do you need superior additive protection on your closed system? The problem with dirty water Water is the main means of closed system 1. Scale formation temperature distribution. It affects every single piece of equipment and every single person in 2. Corrosion the spaces that you manage. Wherever there is system water, four problems will occur: scale 3. Microbial growth formation, corrosion, fouling and microbial growth. 4. Fouling & sludge At the heart of your facility is a perfectly good heating or cooling system. Potential dangers hiding It loses its energy in closed system water. and transfer capacity to a fouled and dirty circulatory system. LIMESCALE METALLIC SLUDGE This leads to BACTERIAL BIOFILM bad distribution, breakdowns, cold spots and energy waste. You could be losing 10% energy or What dirty system water more from dirty system water. canVEXO Proposal do ifDoc left Ver. 1.0 untreated. 01/06/2020 Page 3 VEXO Additives Ver. 1.0 11/06/2021 Why the X-PO range offers low-hazard, high-quality performance where it counts Made in the UK Formulated by leading UK chemists Suitable for closed-loop systems (HTG/CHW & Condenser) A complete range of low hazard “greener” additives NSF certified Available via nationwide resellers Continuous R&D by industry Energy Savings Trust leading professionals endorsed Inhibitor (X-PO10) Proven Energy Savings o A holistic 360 range of Inhibitor (X-PO10) additives, equipment and tests Approved by major boiler Higher concentrate = less waste manufacturers and OEM's and storage (X-PO10) Reduced Risk & COSHH assessment benefits Formulated for optimum results 20L Non-flush cleaning technology (X-PO35) Competitor 1 1% v/v Non-flush online descaler 2000L (X-PO20) 10L FOR System Volume Super concentrate for reduced storage and Competitor 2 0.5% v/v transport Test kits available 7.1L Extends X-POT warranty to six years when using X-PO10 X-PO10 0.36% v/v Page 4 VEXO Additives Ver. 1.0 11/06/2021 The X-PO full spectrum treatment range Use the quick guide below to find the X-PO additive to fit your specific needs. Application Solution ADDITIVE DETAILS AND APPLICATION X-PO TREATMENT DOSE RATE DESCRIPTION APPLICATION v/v ® Inhibitor Closed Heating & Cooling -PO10 0.36% Non-flush scale remover Closed ® with X-POT filtration Heating & Cooling -PO20 0.36% Non-flush system cleansing Closed ® with X-POT filtration Heating & Cooling -PO35 0.36% Closed ® De-sludges old systems Heating & Cooling -PO40 0.36% Cleansing New Systems Closed ® Heating & Cooling -PO45 0.36% Low hazard freeze CHW & Ground ® Ready to protection ready-mix Source Heat Pumps -PO50 use to -12°C Low hazard freeze Closed protection concentrate Heating & Cooling Low hazard freeze CHW & Ground ® On site by protection concentrate Source Heat Pumps -PO55 v/v Low hazard freeze Air Source protection concentrate Heat Pumps ® Disinfectant All closed systems -PO80 0.01% Page 5 VEXO Additives Ver. 1.0 11/06/2021 ® Superior all-round system -PO10 o INHIBITOR protection up to 90 C Benefits of X-PO10: Ÿ Unbeatable heating, chilled or condenser water system protection Ÿ Super concentrated formula - dilutes further than other leading brands Ÿ Lowers CO2 emissions Ÿ Increased system performance and lifespan Ÿ Exceptional protection in both hard and soft water systems Ÿ Effective up to 90oC Ÿ Environmentally friendly 0.36% Ÿ Neutral pH formula v/v Ÿ Can be used on mixed metals and plastic pipework Approved by: and more Check your inhibitor levels regularly with Also available in single dose an X-PO10 Test Kit units with easy pour spout. Page 6 VEXO Additives Ver. 1.0 11/06/2021 Why not take an IBC to save money and storage and comply with BS 7593:2019? Housing authorities are working smarter to save money, energy and waste. Join the revolution. Buying a 1000 litre IBC may seem daunting at first, but once you do the math it starts making much more sense than An X-PO10 IBC offers: purchasing hundreds of single dose bottles. They require storage space and adds significantly to your facility’s waste Zero waste disposal. One IBC is safe to transport and you’ll never run out of inhibitor. A free transfer pump and 10 x 5L reusable 5-10% Energy savings containers will be provided with your first purchase. on aged systems Asset life improvement One 1000L Cost savings X-PO10 IBC Addressing fuel poverty fills a free issue 5L reusable drum 200 times each 5L refill treats twenty houses! x20 HUGE Reduces your waste with SAVINGS per treatment x4000! Less than half the market average without compromising on quality. plastic bottles per IBC. Page 7 VEXO Additives Ver. 1.0 11/06/2021 -PO35® Cleanser without the need NON-FLUSH to flush Benefits of X-PO35: Ÿ Unbeatable non-flush cleanser for heating, chilled & condenser water systems Ÿ Lifts and mobilises contaminants and bio-films until captured by a VEXO X-POT* side stream filter Ÿ Cleans and passivates bare metal surfaces Ÿ Reduces the risk of under deposit corrosion NO FLUSH Ÿ Super concentrate formula NO DRAIN 10L Treats up to 2,800 litres of system volume 0.36% Ÿ Remains within the system for up to v/v 48 hours before dosing X-PO10 Inhibitor NOTE: X-PO35 has been formulated for use only with a VEXO X-POT Side stream filtration and dosing unit. MAGNETS FILTER AIR DOSING DIRTY CLEAN Neutral pH non intrusive and passive on-line cleansing formula. Strips biofilm and gently cleanses system materials for up to 48 hours. Liberated deposits are captured within the X-POT. Simply dosing X-PO10 post cleaning makes this synergised system clean a significant option for aged live systems. Ideal pre-clean for new plant room installations! Also available: X-PO35 Test Kits and 1000L IBC’s Page 8 VEXO Additives Ver. 1.0 11/06/2021 -PO20® Removes & dissolves DE-SCALER limescale deposits Benefits of X-PO20: Ÿ Unbeatable heating, chilled & condenser water descaling agent Ÿ Eliminates boiler noise Ÿ Super concentrate formula – 10L treats up to 2,800 litres of system volume Ÿ Can remain within the system – No need to drain after treating Ÿ Strips limescale from heat exchangers & other components Ÿ Non-toxic Ÿ Non-acidic formulation Ÿ Low environmental impact formula -PO40® Heavy duty desludging DE-SLUDGER agent for aged systems Benefits of X-PO40: Ÿ Superior desludging agent for old or blocked heating, chilled & condenser water installations Ÿ Increases system performance and efficiency Ÿ Lowers system running costs Ÿ Removes cold spots and increases system circulation Ÿ Super concentrate formula – 10L treats up to 2,800 litres of system volume Ÿ Neutral pH. Friendly to all common system materials Page 9 VEXO Additives Ver. 1.0 11/06/2021 -PO45® Cleans and passivates NEW SYSTEM new system installations Benefits of X-PO45: Ÿ Superior pre-commissioning cleaning agent for heating, chilled & condenser water installations Ÿ Tackles mill scale, flux, oils and flash corrosion Ÿ Dispersal power technology Ÿ Prepares metal surfaces for passivation Ÿ Super concentrate formula – 10L treats up to 2,800 litres of system volume Ÿ Neutral pH. Friendly to all common system materials -PO80® Kills all common bacteria BIOCIDE found in systems Benefits of X-PO80: Ÿ Rapid acting Biocide for heating, chilled & condenser Water Ÿ Kills Legionella, Pseudomonas, NRB & SRB bacteria Ÿ Kills fungi and algae Ÿ Effective up to 60 °C Ÿ Ultra concentrate 5L treats up to 50,000 litres Ÿ Low hazard formula Ÿ Effective dose rate of 100ppm Ÿ Neutral pH formulation Page 10 VEXO Additives Ver. 1.0 11/06/2021 ® -PO50 Non-hazardous Glycol ANTI-FREEZE RM anti-freeze ready-mix Benefits of X-PO50: Ÿ Superior monopropylene anti-freeze agent for chilled or condenser water installations Ÿ Includes X-PO10 inhibitor protection GLYCOL Ÿ Borate free Ÿ Low-toxicity monopropylene formula Ÿ No dilution required. Ready to use Ÿ Effective up to -12°C -PO55® Non-hazardous Glycol ANTI-FREEZE C anti-freeze concentrate Benefits of X-PO55: Ÿ Superior monopropylene anti-freeze agent for chilled or condenser water installations GLYCOL Ÿ Includes X-PO10 inhibitor protection Ÿ Borate free Ÿ Low-toxicity monopropylene formula Ÿ Neat/concentrate - dilution required Ÿ Corrosion protection down to 20% v/v. Page 11 VEXO Additives Ver. 1.0 11/06/2021 Unmatched savings on energy and resources HOT WATER 9% The X-PO range is proven to 10% OTHER save you on all fronts... CATERING10% HEATING LIGHTING HVAC consumes HALF the energy & COMPUTING24% & COOLING of the average UK facility! 50% £ Heating efficiency Cooling efficiency Water savings Better readings Energy savings of 10% and more Resource friendly A healthier facility and planet Page 12 VEXO Additives Ver. 1.0 11/06/2021 Uncompromising quality, officially recognised by the HVAC industry. -PO10 INHIBITOR The facilities manager’s tried and tested superpower Endorsement from major Mitigates litigation risk for HVAC manufacturers system products failures and organisations and warranty disputes Safe and friendly to Simple test procedure use, store and transport ensures correct levels High quality product for Ensures industry leading optimum closed system protection levels for HVAC performance your investment Page 13 VEXO Additives Ver.