DOCSLIB.ORG

Fleetrite Collision Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fleetrite Collision Catalog Fleetrite Collision Catalog 2019 Public • For questions and additional support about accurately identifying the correct Fleetrite part number for hoods and bumpers, call or email the Fleetrite Collision Parts Support Hotline. • This dedicated hotline is ready to Collision answer questions, provide technical advice, and help to identify the correct Parts hoods and bumpers for the application • When calling the hotline, please have the following information available: Support Vehicle Information: year, make and model Contact Information: name, Hotline company, phone and email • 1-888-390-6221 • 1-307-269-0102 • [email protected] Fleetrite.com | 2 Public Fleetrite Collision Catalog Table of Contents Kenworth Collision Parts Hotline 2 T2000 22 T800 24 Freightliner W900 26 Cascadia 4 T660 27 Century 6 T600 28 Columbia 8 T300 29 M2 10 Peterbilt 379 30 FLD & Sprinter 12 International Volvo VNL 32 DuraStar 13 Mack ProStar 15 CX 34 PayStar 17 RD 35 LoneStar 18 WorkStar 19 Bus 9900 20 IC Bus 36 7000 21 Blue Bird Bus 36 Thomas C2 Bus 36 Public Is the OEM part number listed below? If yes, please Freightliner continue with Fleetrite hood number listed. If not, please answer these questions: Cascadia 1. What is the make, model and year? 125” BBC 2. What is the length of the hood? Measured straight down the center to the grille opening (as pictured PARTS to left). Glass › If the length is 50 inches long, you need: FLTHCASL Hood Grille Lights Bumper HOODS BUMPERS Center, Inner Long Hood (2008-2016) Right, Inner Left, Inner FLTBCCASCIP FLTHCASL FLTBCCASFR FLTBCCASFL OEM Part Number: OEM Part Number: A21-28443-000 A17-15340-007, Center, Outer A17-15340-004 FLTBCCASCOP OEM Part Number: A21-28446-002 Right, Outer Left, Outer Right, Inner Left, Inner FLTBCCASOCR FLTBCCASOCL FLTBCCASICR FLTBCCASICL OEM Part Number: OEM Part Number: OEM Part Number: OEM Part Number: R21-28619-003 L21-28619-002 R21-27300-001 L21-27300-000 • Hinge bar included • 2008-2016 Freightliner is a registered trademark of Daimler Trucks North America, LLC. Truck photo is for model identification purposes only. Fleetrite.com | 4 Confirm fit prior to painting, painted parts cannot be returned. Public Freightliner Cascadia 125 BUMPERS GLASS LIGHTS One Piece Bent Windshield Left Headlight Clad with Kit (2007- (2003-2004) (2008-2014) 2016) FLTDW01000PK1 FLTHLFCASL FLTBCASC OEM Part Number: A06-51907-002 OEM Part Number:A21-28546- 057 Painted Grey with No Fog Light Holes FLTBCASPGNOFL OEM Part Number: A21-28546-004, A21- Right Headlight 28546-008 (2008-2014) FLTHLFCASR Painted Grey with Driver Side Windshield OEM Part Number: A06-51907-003 Fog Light Holes (2008-2016) Driver Side Fog Light FLTBCASPG FLTDW01732PK1 (1 Pack) FLTFLFCASL OEM Part Number: A21-28546-054 FLTDW01732PK4 (4 Pack) OEM Part Number: A06-51908-000 GRILLES Chrome Grille Hardware (2008-2016) (2008-2016) FLTGFCASC FLTGHCASC OEM Part Number: Passenger Side Fog Light A17-19112-011 FLTFLFCASR Passenger Side Windshield OEM Part Number: (2008-2016) A06-51908-001 FLTDW01731PK1 (1 Pack) FLTDW01731PK4 (4 Pack) • Precision engineered and test fitted to ensure factory form and finish for every application • Complies with FMVSS108 5 Public Is the OEM part number listed below? If yes, please continue with Fleetrite hood number listed. If not, please Freightliner answer these questions: Century 1. What is the make, model and year? 120” BBC 2. What is the length of the hood? Measured straight down the center to the grille opening (as pictured PARTS below). › If the length is 55 inches, has Hinge Bushings 41 Hood inches apart, onlaid grille and year is within Grille 1996-2002, you need: FLTHCENC1202 Lights › If the length is 55 inches, has Hinge Bushings 6 inches apart, onlaid grille and year is within Bumper 2003-2005, you need: FLTHCENC1201 › If the length is 55 inches, has Hinge Bushings 6 inches apart, without fiberglass bar and year is 2005 and up, you need: FLTHCENC120 HOODS • 1996-2002 (1996-2002) FLTHCENC1202 • 41” hinge bushings OEM Part Number: • Onlaid grille A17-12701-002, A17-15420-000 • Round headlights (2003-2005) FLTHCENC1201 • 2003-2005 OEM Part Number: • 6” hinge bushings A17-13154-000, A17-13154-004, • Onlaid grille A17-13154-006, A17-15365-000 • Round headlights (2005 and up) FLTHCENC120 • 2005 and up 6” hinge bushings OEM Part Number: • A17-15092-002, A17-15092-007, • Without fiberglass molding A17-15092-008, A17-15092-010 • Torsion bar spring and larger chrome overlay grille • Will not fit DD15 Freightliner is a registered trademark of Daimler Trucks North America, LLC. Truck photo is for model identification purposes only. Fleetrite.com | 6 Confirm fit prior to painting, painted parts cannot be returned. Public Freightliner Century 120 BUMPERS GRILLES Chrome Chrome Grille Hardware (2005-2016) (2005 and up) (2005 and up) FLTBCENC FLTGFCENT FLTGHCENT OEM Part Number: OEM Part Number: A21-26683-004 A17-16132-004 Center, Left Extension, Fiberglass Right Extension, Fiberglass (1996-2005) Fiberglass (1996-2005) FLTBCENCP (1996-2005) FLTBCENLP OEM Part Number: FLTBCENRP A21-28177-001, OEM Part Number: OEM Part Number: A21-26683-008 A21-26684-001 A21-26684-000 LIGHTS Right Headlight (1996-2006) FLTHLFCENR OEM Part Number: A06-20711-001 Left Headlight • Chrome and painted finish (1996-2006) • Lightweight aerodynamic design FLTHLFCENL OEM Part Number: A06-20711-000 **Note: Confirm fit prior to painting. Painted parts cannot be returned. 7 Public Is the OEM part number listed below? If yes, please continue with Fleetrite hood number listed. If not, please Freightliner answer these questions: Columbia 1. What is the make, model and year? 120” BBC 2. What is the length of the hood? Measured straight down the center to the grille opening PARTS 3. Ask for a picture of the inside hood Hood › If the air cleaner connector is on the passenger Grille side, you need FLTHCOL3PC Lights › If the air cleaner connector is on the driver side, you need FLTHCOLRTM3 Bumper HOODS RTM Bonded in 3 Pieces RTM Bonded in 3 Pieces (2008 and up) (2001-2007) FLTHCOLRTM3 FLTHCOL3PC OEM Part Number: A17-13575-001, A17-13575-005, OEM Part Number: A17-13575-006, A17-13575-007, A17-15064-001, A17-16515-000, A17-16515-002 WhatWhat is RTM?is RTM? A17-15549-000, A17-15549-002, A17-16515-000, Resin Transfer Resin Transfer A17-16515-002, A17-16953-000 Molding is a Molding is a manufacturing • 2001-2007 manufacturing process for a Teardrop headlights process for a • 2008 and up • smooth finish • Will not fit with short smooth finish • ForAir cleaner hood connector on • Lower horizontal air the driver side duct below grille • DD15/16 LT • Air cleaner connector engine on passenger side • With gas recirculation Freightliner is a registered trademark of Daimler Trucks North America, LLC. Truck photo is for model identification purposes only. Fleetrite.com | 8 Confirm fit prior to painting, painted parts cannot be returned. Public Freightliner Columbia BUMPERS (2001-2016) GRILLES (2001 and up) LIGHTS Chrome Grille Hardware Chrome Left Headlight FLTGFCOLU FLTGHCOLU FLTBCOLB (1996-2004) OEM Part Number: A21-26266-002 OEM Part Number: A17-15251-003 FLTHLFCOLL OEM Part Number: A06-32496-006 Center, Fiberglass Right Headlight FLTBCOLCP (1996-2004) OEM Part Number: FLTHLFCOLR A21-26020-006, A21-26020-011 OEM Part Number: A06-32496-007 Bumpers: • Chrome and painted finish • Lightweight aerodynamic design Fog Light, Grilles: Yellow Lens FLTFLCOLY Left Extension, • Chromed ABS composite material for increased performance and durability OEM Part Number: Fiberglass 632497001 • Easy installation FLTBCOLLP • Precision engineered for OEM fit and OEM Part Number: replacement A21-26021-004 Fog Light, Right Extension, Lights: Clear Lens Fiberglass • Precision engineered and test fitted FLTFLCOLC to ensure factory form and finish for FLTBCOLRP OEM Part Number: every application A06-32497000 OEM Part Number: Complies with FMVSS108 A21-26021-005 • 9 Public Is the OEM part number listed below? If yes, please continue with Fleetrite hood number listed. If not, please answer Freightliner these questions: 1. What is the make, model and year? M2 2. Is the hood an M2 106 or M2 112? The M2 112 has two grille sections: larger on top and smaller on bottom. 3. What is the length of the hood? Measured straight down the center to the grille opening 1. If the hood is 39” long, it is an M2 106 and PARTS four versions are available, listed below. Hood 2. If the hood is 43 ½” long and has two grille Grille sections, it is an M2 112 and four versions are available, listed below. Lights 4. Does the hood have lights with a chrome bezel Bumper around? 5. Does it have a lower fiberglass band extension under the lower edge of the hood? 106 HOODS With Bezel, with 112 HOODS Lower Extension With Bezel, With With Bezel With Bezel FLTHFLM2106BX Lower Extension FLTHFLM2106B FLTHFLM2112B OEM Part Number: A17-14802-000, A17-15459-000, OEM PART NUMBER FLTHFLM2112BX A17-15459-002, A17-16394-004, A17-16639-000, A17-15460-002, A17-19133-006, OEM Part Number: A17-16903-000, A17-16908-004, A17-18190-000, A17-19133-038, A17-19218-003 A17-18200-010 A17-18196-004, A17-18197-004, A17-19133-002, A17-19218-001, A17-19218-012, A17-19133-012, A17-19133-022, A17-19133-032 lower extension lower extension Without Bezel, with Lower Extension Without Bezel Without Bezel, with Without Bezel FLTHFLM2112NB Lower Extension FLTHFLM2106NB FLTHFLM2106LX OEM Part Number: A17-15457-002, A17-16425-000, OEM Part Number: FLTHFLM2112LX A17-16901-000, A17-16902-000, A17-18189-000, A17-15458-002, A17-19133-000, A17-19725-000 A17-19133-004 *Confirm fit of all hoods prior to painting Freightliner is a registered trademark of Daimler Trucks North America, LLC. Truck photo is for model identification purposes only. Fleetrite.com | 10 Confirm fit prior to painting, painted parts cannot be returned.
Load more

Recommended publications
  • Vehicle Identification Number (VIN) System
    Vehicle Identification Number (VIN) System Position Definition Character Description Country of 1 1 2 3 United States; Canada; Mexico Origin 2 Manufacturer G General Motors Chevrolet; Incomplete Chevrolet Truck; GMC; Incomplete B C D T N 3 Make GMC Truck; Chevrolet Multi Purpose Vehicle; GMC Multi K Y Purpose Vehicle; Cadillac Multi Purpose Vehicle 3001-4000/Hydraulic; 4001-5000/Hydraulic; 5001- GVWR/Brake B C D E F G 6000/Hydraulic; 6001-7000/Hydraulic; 7001-8000/Hydraulic; 4 System H J K 8001-9000/Hydraulic; 9001-10000/Hydraulic; 10001- 14000/Hydraulic; 14001-16000/Hydraulic Truck 5 Line/Chassis C K Conventional Cab/4x2; Conventional Cab/4x4 Type Half Ton; ¾ Ton, 1 Ton; 1/2 Ton Luxury; 3/4 Ton Luxury; 1 6 Series 1 2 3 6 7 8 Ton Luxury Four-Door Cab/Utility; Two-Door Cab; Suburban/Denali XL 7 Body Type 3 4 6 9 Two-Door Utility; Extended Cab/Extended Van V U T W G (LR4) 4.8L Gas; (LQ4) 6.0L Gas; (LM7) 5.3L Gas; (L35) 4.3L 8 Engine Type 1 Gas; (L18) 8.1L Gas; (LB7) 6.6L Diesel 9 Check Digit -- Check Digit 10 Model Year 1 2001 Oshawa, Ontario; Pontiac, Michigan; Fort Wayne, Indiana; 1 E Z J G F 11 Plant Location Janesville, Wisconsin; Silao, Mexico; Flint, Michigan; X Experimental Engineering Manufacturing Plant Sequence 12-17 -- Plant Sequence Number Number Tips to understanding your VIN number: Starting in model year 1954, American automobile manufacturers began stamping and casting identifying numbers on cars and their parts. The vehicle identification number has become referred to as the "VIN".
    [Show full text]
  • The Effects of Retroreflective Conspicuity Tape on Motorcycle Detection Distance Among Car Drivers
    International Journal of Road Safety 1(1) 2020: 20-25 ________________________________________________________________________________________________________ International Journal of Road Safety Journal homepage: www.miros.gov.my/journal _______________________________________________________________________________________________ The Effects of Retroreflective Conspicuity Tape on Motorcycle Detection Distance among Car Drivers Muhamad Syukri Abdul Khalid1,*, Mohd Hafzi Md Isa2, Azhar Hamzah1, Mohd Syazwan Solah1, Aqbal Hafeez Ariffin1, Noor Faradila Paiman1, Zulhaidi Mohd Jawi1, Muhammad Ruhaizat Abd Ghani3, Khairil Anwar Abu Kassim1 & Siti Zaharah Ishak2,4 *Corresponding author: [email protected] 1Vehicle Safety & Biomechanics Research Centre, Malaysian Institute of Road Safety Research, 43000 Kajang, Selangor, Malaysia 2Director General’s Office, Malaysian Institute of Road Safety Research, 43000 Kajang, Selangor, Malaysia 3Road Safety Engineering and Environment Research Centre, Malaysian Institute of Road Safety Research, 43000 Kajang, Selangor, Malaysia 4Faculty of Civil Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor, Malaysia ________________________________________________________________________________________________________ ABSTRACT ARTICLE INFO _____________________________________________________________________ ___________________________ This study was carried out to determine whether or not retroreflective conspicuity tapes installed Article History: onto the side of a motorcycle would
    [Show full text]
  • State Laws Impacting Altered-Height Vehicles
    State Laws Impacting Altered-Height Vehicles The following document is a collection of available state-specific vehicle height statutes and regulations. A standard system for regulating vehicle and frame height does not exist among the states, so bumper height and/or headlight height specifications are also included. The information has been organized by state and is in alphabetical order starting with Alabama. To quickly navigate through the document, use the 'Find' (Ctrl+F) function. Information contained herein is current as of October 2014, but these state laws and regulations are subject to change. Consult the current statutes and regulations in a particular state before raising or lowering a vehicle to be operated in that state. These materials have been prepared by SEMA to provide guidance on various state laws regarding altered height vehicles and are intended solely as an informational aid. SEMA disclaims responsibility and liability for any damages or claims arising out of the use of or reliance on the content of this informational resource. State Laws Impacting Altered-Height Vehicles Tail Lamps / Tires / Frame / Body State Bumpers Headlights Other Reflectors Wheels Modifications Height of head Height of tail Max. loaded vehicle lamps must be at lamps must be at height not to exceed 13' least 24" but no least 20" but no 6". higher than 54". higher than 60". Alabama Height of reflectors must be at least 24" but no higher than 60". Height of Height of Body floor may not be headlights must taillights must be raised more than 4" be at least 24" at least 20".
    [Show full text]
  • 2017 Nissan Armada | Owner's Manual and Maintenance
    2017 NISSAN ARMADA 2017 ARMADA OWNER’S MANUAL and MAINTENANCE INFORMATION Printing: August 2016 (03) Y62-D Publication No.: OM17E0 0Y62U1 Printed in U.S.A. For your safety, read carefully and keep in this vehicle. T00UM-5ZW1D Y62-D MODIFICATION OF YOUR VEHI- WHEN READING THE MANUAL in this Owner’s Manual for contact information. CLE This manual includes information for all IMPORTANT INFORMATION ABOUT features and equipment available on this THIS MANUAL This vehicle should not be modified. model. Features and equipment in your Modification could affect its performance, You will see various symbols in this manual. They vehicle may vary depending on model, trim are used in the following ways: safety or durability, and may even violate level, options selected, order, date of governmental regulations. In addition, production, region or availability. There- damage or performance problems result- fore, you may find information about WARNING ing from modification will not be covered features or equipment that are not in- under the NISSAN warranties. cluded or installed on your vehicle. This is used to indicate the presence of All information, specifications and illustrations in a hazard that could cause death or this manual are those in effect at the time of serious personal injury. To avoid or WARNING printing. NISSAN reserves the right to change reduce the risk, the procedures must specifications, performance, design or compo- be followed precisely. Installing an aftermarket On-Board Di- nent suppliers without notice and without agnostic (OBD) plug-in device that uses obligation. From time to time, NISSAN may the port during normal driving, for update or revise this manual to provide owners CAUTION example remote insurance company with the most accurate information currently monitoring, remote vehicle diagnostics, available.
    [Show full text]
  • Consumer Product Safety Commission § 1512.17
    Consumer Product Safety Commission § 1512.17 in) below the point on the seat surface not be peeled or scraped away without that is intersected by the line of the removal of tire material. seat post. The optical axis of the reflec- (3) The retroreflective material shall tor shall be directed rearward within 5° be as resistant to abrasion as is the ad- of the horizontal-vertical alignment of jacent sidewall material so that when the bicycle when the wheels are trav- retroreflective material is removed eling in a straight line, as defined in from the inflated tire by abrasion with § 1512.18(m)(2). The reflectors and/or a wet, steel bristle brush, tire material mounts shall incorporate a distinct, will be removed along with the preferred assembly method that shall retroreflective material. insure that the reflector meets the op- (4) The retroreflective material shall tical requirements of this paragraph (d) be tested for performance in accord- when the reflector is attached to the ance with the retroreflective tire test, bicycle. The rear reflector shall be § 1512.18(o), to assure the reflectance tested in accordance with the reflector properties over the angles given in mount and alignment test, § 1512.18(m). table 3. When a portion of the (e) Pedal reflectors. Each pedal shall retroreflective material is selected have reflectors located on the front and (and the remainder is masked as speci- rear surfaces of the pedal. The reflector fied in § 1512.18(o)(2)(i)), the selected elements may be either integral with portion shall not contact the ground the construction of the pedal or me- plane when the assembled bicycle is chanically attached, but shall be suffi- resting on that plane in any orienta- ciently recessed from the edge of the tion.
    [Show full text]
  • Technical Instructions
    TECHNICAL INSTRUCTIONS FOR SAFETY RECALL 19TA20 HEADLAMP(S) MAY BECOME INOPERATIVE CERTAIN 2020 SUPRA The repair quality of covered vehicles is extremely important to Toyota. All dealership technicians performing this recall are required to successfully complete the most current version of the E-Learning course “Safety Recall and Service Campaign Essentials”. To ensure that all vehicles have the repair performed correctly; technicians performing this recall repair are required to currently hold at least one of the following certification levels: • Expert Technician (any specialty) + TIN519B Instructor led course • Master Technician (any specialty) + TIN519B Instructor led course • Master Diagnostic Technician + TIN519B Instructor led course It is the dealership’s responsibility to select technicians with the above certification level or greater to perform this recall repair. Carefully review your resources, the technician skill level, and ability before assigning technicians to this repair. It is important to consider technician days off and vacation schedules to ensure there are properly trained technicians available to perform this repair at all times. ◄ STOP ► BEFORE YOU SCHEDULE CUSTOMERS OR INITIATE REPAIRS, READ BELOW: THE REMEDY WILL REQUIRE CALIBRATION OF THE MILLIMETER WAVE RADAR SENSOR BECAUSE THAT PART IS REMOVED DURING THE REPAIR. DEALERSHIPS DO NOT HAVE THE TOOLS REQUIRED TO CALIBRATE THE MILLIMETER WAVE RADAR SENSOR AS OUTLINED IN THE TECHNICAL INSTRUCTIONS ON TIS. YOU MUST REQUEST A TOOL TO BE LOANED TO YOUR DEALERSHIP FROM YOUR REGION OFFICE. NATIONWIDE SUPPLY OF THESE TOOLS IS VERY LIMITED. BEFORE SCHEDULING ANY CUSTOMERS, OR INITIATING ANY REPAIRS, PLEASE ENSURE THAT YOU HAVE SECURED A TOOL FOR THE TIME REQUIRED FOR THE CUSTOMER’S APPOINTMENT.
    [Show full text]
  • Me Or Body Is Different from the Manufacturer's Specifications, Unless That Difference Is Caused By: A
    MAINE Definitions Altered Vehicle. A motor vehicle with a gross vehicle weight rating of 10,000 pounds or less that is modified so that the distance from the ground to the lowermost point on any part of the frame or body is different from the manufacturer's specifications, unless that difference is caused by: A. The use of tires that are no more than 2 sizes larger than the manufacturer's recommended sizes; B. The installation of a heavy duty suspension, including shock absorbers and overload springs; or C. Normal wear of the suspension system that does not affect control of the vehicle. Antique Auto. An automobile or truck manufactured in or after model year 1916 that is: A. More than 25 years old; B. Equipped with an engine manufactured either at the same time as the vehicle or to the specifications of the original engine; C. Substantially maintained in original or restored condition primarily for use in exhibitions, club activities, parades or other functions of public interest; D. Not used as its owner's primary mode of transportation of passengers or goods; E. Not a reconstructed vehicle; and F. Not an altered vehicle. Classic Vehicle. A motor vehicle that is at least 16 years old but less than 26 years old that the Secretary of State determines is of significance to vehicle collectors because of its make, model and condition and is valued at more than $5,000. Custom Vehicle. A motor vehicle manufactured after model year 1948 that: A. Is at least 25 years old or was manufactured to resemble a motor vehicle that is at least 25 years old; and B.
    [Show full text]
  • PT & TT Car Classification Form
    ® NASA Performance Touring (PTD-PTF) & Time Trial (TTD-TTF) Car Classification Form--2018 (v13.1/15.1—1-15-18) Driver or Team Name________________________________ Date______________ Car Number________ Region_____________ e-mail________________________________________ Car Color_______________ If a team, list drivers’ names (two maximum per team): ___________________________________________ ___________________________________________ Vehicle: Year_______ Make______________ Model___________________ Special Edition?____________ NASA PT/TT Base Class _____________ Base Weight Listing (from PT/TT Rules)______________lbs. Minimum Competition Weight (w/driver)_______________lbs. Multiple ECU Maps? Describe switching method and HP levels:_____________________________________________ DYNO RE-CLASSED VEHICLES Only: (Only complete this section if the vehicle has been Dyno Re-classed by the National PT/TT Director!) New PT/TT Base Class Assigned by the National PT/TT Director:_________(Attach a copy of the re-classing e-mail) Maximum allowed Peak whp_________hp Minimum Competition Weight__________lbs. All cars with a Motor Swap, Aftermarket Forced Induction, Modified Turbo/Supercharger, Aftermarket Head(s), Increased Number of Camshafts, Hybrid Engine, and Ported Rotary motors MUST be assessed by the National PT/TT Director for re-classification into a new PT/TT Base Class! (See PT Rules sections 6.3.C and 6.4) (E-mail the information in the listed format in PT Rules section 6.4.2 to the National PT/TT Director at [email protected] to receive your new PT/TT Base Class) Note: Any car exceeding the Adjusted Weight/Horsepower Ratio limit for its class will be disqualified. (see PT Rules Section 6.1.2 and Appendix A of PT Rules). Proceed to calculate your vehicle’s Modification Points assessment for up-classing purposes.
    [Show full text]
  • Corksport 2010-2013 Mazdaspeed 3 Hood Scoop Install Instructions
    Thank you for purchasing the CorkSport Mazdaspeed 3 Carbon Fiber Hood Scoop. Give your Mazdaspeed's hood a visual boost and improve airflow with the CorkSport Carbon Fiber Hood Scoop. Engineered for a perfect fit for the 2010 - 2013 Mazdaspeed 3. Please let us know what you think of them by providing feedback here: https://corksport.com/2010-2013-mazdaspeed-3-hood- scoop.html Make sure your vehicle is completely cooled down prior to starting installation. If you are going to work on your car within an hour or two of having driven it, use a fan to cool off the car. Note - The carbon fiber products are hand-crafted FRP with carbon overlay, thus, no two items are identical. Small imperfections such as wavy weaves, small bubbles, and clear coat blemishes are inevitable. Carbon fiber products are durable, but still need standard care and maintenance to continue looking good. Keep it clean and minimize exposure in the sun and wax as necessary. We recommend a final clear coat to this product to protect it from the elements. These instructions were written for reference only and the use of a factory service manual is recommended. Please read these instructions thoroughly prior to starting installation These installation instructions were written using a 2013 Mazdaspeed 3. Other year Mazdaspeed3 models will be similar. General Info. Tooling List Parts List Part #: AXL-8-801 10mm Socket One (1) CorkSport Carbon Fiber Hood Scoop Time Est: 0.5 hours 1/4” Drive Ratchet Ten (10) M6x1.0 Nuts Wrench Rating: 2/5 Flat Blade Screw Driver Torque Wrench Need Help With Your Installation? Call (360) 260-CORK OEM Pieces Removal Section 1: Remove the Factory Hood Scoop Pg.
    [Show full text]
  • Chapter 347 Equipment of Vehicles
    Updated 2013−14 Wis. Stats. Published and certified under s. 35.18. January 1, 2015. 1 Updated 13−14 Wis. Stats. EQUIPMENT OF VEHICLES 347.02 CHAPTER 347 EQUIPMENT OF VEHICLES SUBCHAPTER I 347.28 Certain vehicles to carry flares or other warning devices. GENERAL PROVISIONS 347.29 Display of warning devices for certain vehicles when standing on highway. 347.01 Words and phrases defined. 347.30 Penalty for violating lighting equipment requirements. 347.02 Applicability of chapter. SUBCHAPTER III 347.03 Sale of prohibited equipment unlawful. OTHER EQUIPMENT 347.04 Owner responsible for improperly equipped vehicle. 347.35 Brakes. 347.05 Reciprocity agreements as to equipment. 347.36 Performance ability of brakes. SUBCHAPTER II 347.37 Brake fluid, sale regulation. LIGHTING EQUIPMENT 347.38 Horns and warning devices. 347.06 When lighted lamps required. 347.385 Auxiliary lamps on emergency vehicles; traffic control signal emergency 347.07 Special restrictions on lamps and the use thereof. preemption devices. 347.08 Determining the visibility distance and mounted height of lamps. 347.39 Mufflers. 347.09 Headlamps on motor vehicles. 347.40 Mirrors. 347.10 Headlamp specifications for motor vehicles other than mopeds and motor 347.41 Speed indicators. bicycles. 347.413 Ignition interlock device tampering; failure to install. 347.11 Headlamp specifications for mopeds and motor bicycles. 347.415 Odometer tampering. 347.115 Modulating headlamps for motorcycles, motor bicycles or mopeds. 347.417 Immobilization device tampering. 347.12 Use of multiple−beam headlamps. 347.42 Windshield wipers. 347.13 Tail lamps and registration plate lamps. 347.43 Safety glass. 347.14 Stop lamps.
    [Show full text]
  • Chapter Trans 305
    Published under s. 35.93, Wis. Stats., by the Legislative Reference Bureau. 401 DEPARTMENT OF TRANSPORTATION Trans 305.02 Chapter Trans 305 STANDARDS FOR VEHICLE EQUIPMENT Subchapter I — General Provisions Trans 305.29 Steering and suspension. Trans 305.01 Purpose and scope. Trans 305.30 Tires and rims. Trans 305.02 Applicability. Trans 305.31 Modifications affecting height of a vehicle. Trans 305.03 Enforcement. Trans 305.32 Vent, side and rear windows. Trans 305.04 Penalty. Trans 305.33 Windshield defroster−defogger. Trans 305.05 Definitions. Trans 305.34 Windshields. Trans 305.06 Identification of vehicles. Trans 305.35 Windshield wipers. Trans 305.065 Homemade, replica, street modified, reconstructed and off−road vehicles. Subchapter III — Motorcycles Trans 305.37 Applicability of subch. II. Subchapter II — Automobiles, Motor Homes and Light Trucks Trans 305.38 Brakes. Trans 305.07 Definitions. Trans 305.39 Exhaust system. Trans 305.075 Auxiliary lamps. Trans 305.40 Fenders and bumpers. Trans 305.08 Back−up lamp. Trans 305.41 Fuel system. Trans 305.09 Direction signal lamps. Trans 305.42 Horn. Trans 305.10 Hazard warning lamps. Trans 305.43 Lighting. Trans 305.11 Headlamps. Trans 305.44 Mirrors. Trans 305.12 Parking lamps. Trans 305.45 Sidecars. Trans 305.13 Registration plate lamp. Trans 305.46 Suspension system. Trans 305.14 Side marker lamps, clearance lamps and reflectors. Trans 305.47 Tires, wheels and rims. Trans 305.15 Stop lamps. Trans 305.16 Tail lamps. Subchapter IV — Heavy Trucks, Trailers and Semitrailers Trans 305.17 Brakes. Trans 305.48 Definitions. Trans 305.18 Bumpers.
    [Show full text]
  • Parts Catalog
    FLEETRITE® PARTS CATALOG 2018 FLEETRITE PARTS THE RITE SOLUTION FOR YOU Fleetrite® is the first name recognized for trusted quality in aftermarket truck and bus parts. With over 45 years of strong performance in the industry Fleetrite® parts are OEM aftermarket quality approved and are backed by a one-year nationwide parts and labor warranty. High-quality parts at a competitive price. It’s the reason why it’s always the first recommended by more than 700 International® Truck dealers. So remember, the next time you’re in the market for aftermarket, always keep the top of the line, top of mind. Ask for THE ONE that keeps your Uptime FIRST in line. ASK FOR FLEETRITE® FIRST. FLEETRITE® FIRST TABLE OF CONTENTS ACCESSORIES......................................... 1 ENGINE OVERHAUL KITS .................. 83 BACK-UP ALARMS............................. 1 WATER & FUEL PUMPS ..................... 84 SHOP TOWELS ................................ 1 FUEL INJECTORS ............................ 86 JACKS............................................ 2 RADIOS.......................................... 2 ENGINE COOLING.................................... 87 ANTENNAS...................................... 3 RADIATORS.................................... 87 SURGE TANKS................................ 91 CAB...................................................... 4 FAN DRIVES .................................. 92 HVAC COMPRESSORS....................... 4 EXPANSION VALVES .......................... 8 EXHAUST ............................................. 97 BLOWER MOTORS...........................
    [Show full text]