Woodworking Full-Line Catalog

Total Page:16

File Type:pdf, Size:1020Kb

Woodworking Full-Line Catalog WOODWORKING FULL-LINE CATALOG STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY LEADING WARRANTIES EXPERT TECHNICAL SERVICE INTRODUCTION JET makes all of its woodworking machines with the enthusiast in mind. Designed to allow woodworkers to do more in their shops, these tools are engineered with features that bring out the best work in every woodworker. Fill your shop with the machines you want that have quality you expect. JET has the full line of tools built for the woodworker. 2 SAWING TOOLS BUILT FOR THE WOODWORKER CONTENTS TABLE SAWS . .4-9 SANDERS...............................54-67 BANDSAWS ............................10-19 SHAPERS...............................68-73 MITER SAWS............................20-23 DUST MANAGEMENT.....................74-83 LATHES ................................24-31 CLAMPS................................84-85 GRINDER ...............................32-33 ACCESSORIES ...........................86-87 DRILL PRESSES .........................34-39 JET RED ASSURANCE .......................88 MORTISER ..............................40-41 WARRANTY ...............................89 JOINTERS ..............................42-47 GEAR STORE ...............................90 PLANERS ...............................48-53 SOCIAL MEDIA .............................91 SAWING 3 4 TABLE SAWS MAKE EVERY CUT COUNT TABLE SAWS Get serious in your shop with any of the full line of great table saws from JET. The JET ProShop and JET Deluxe XACTA models provide the highest level of capability and versatility. With a variety of configurations to choose from JET is sure to have the table saw that helps you make every cut count. TABLE SAWS 5 12" XACTA® TABLE SAW FEATURES • Riving knife maintains close blade proximity to reduce STOCK NUMBER 708546PK chance of kickback Model Number JTAS-12-DX Blade Diameter (In.) 12 • 80” of solid cast iron provides a massive work surface Arbor Diameter (In.) 1 • Poly V-Belt increases efficiency and reduces slipping Arbor Speed (RPM) 4300 and vibration Maximum Depth of Cut (In.) 4 • Collection shroud around the blade and integrated Maximum Depth of Cut at 45 Degrees (In.) 2-7/8 hose improve dust collection Maximum Rip Left of Blade (In.) 14 • Integrated arbor lock is accessed from table top for Maximum Rip Right of Blade (In.) 50 rapid blade change Maximum Diameter of Dado (In.) 8 • External tool storage for the fence and miter gauge Maximum Width of Dado (In.) 13/16 • 40-1/2” fence provides greater stability and better Table Type Cast Iron support when ripping Table Size (L x W) (In.) 31-1/2 x 24 • Dado insert included Table Size with Extension (L x W) (In.) 31-1/2 x 80 Miter Gauge Type T-Slot with Stops • Maximum rip left of the blade is 14" Dust Collection Minimum CFM Required (CFM) 350 • Removal of blade guard, pawls and riving knife takes Dust Port Outside Diameter (In.) 4 only seconds Motor Amps 20 Motor Power (HP) 5 Motor Phase (PH) 1 Motor Voltage (V) 230 Prewired Voltage (V) 230 Net Weight (lbs.) 623 6 TABLE SAWS 10" XACTA® TABLE SAWS CHA CK N I G U E Q R i m v e i n t g y s K n i f e S FEATURES STOCK NUMBER SEE PACKAGES • Exclusive commercial XACTA® Fence II with T-square Model Number JTAS-10XL-DX design, choose from either 30" or 50" rip capacities Blade Diameter (In.) 10 • Quick release riving knife greatly reduces Arbor Diameter (In.) 5/8 binding/kickback risk Arbor Speed (RPM) 4300 • Push button arbor lock for rapid blade change Maximum Depth of Cut (In.) 3 Maximum Depth of Cut at 45 Degrees (In.) 2-1/8 • Shrouded Blade increases dust collection efficiency Maximum Rip Left of Blade (In.) 13 • Standard 11" left and right cast iron extension wings Table in Front of Saw Blade at Maximum Depth of Cut (In.) 10 provides the largest table surface in its class Maximum Width of Dado (In.) 13/16 Maximum Diameter of Dado (In.) 8 • Poly-V drive belt system delivers efficient, Table Height (In.) 34 quiet operation Table Size with Standard Extension (L x W/In.) 29 x 42 • Rail-mounted magnetic switch is easy to reach and Table Size without Extension (L x W/In.) 29 x 20 provides overload protection Dust Port Outside Diameter (In.) 4 • Enclosed cabinet with built-in sealed storage drawer Dust Collection Minimum CFM Required (CFM) 350 Net Weight (lbs.) 563 • Hinged motor cover on cabinet gives quick access to the motor and belts • Deluxe miter gauge with adjustable positive stops and large soft grip handle provides large crosscutting capacity and accurate miters OPTIONAL ACCESSORIES STOCK NUMBER PACKAGE DESCRIPTION Riving Knife, Thin Kerf, for Deluxe 10" Cabinet Saw with 3HP, 1PH, 230V, 14.5 5HP, 1PH, 230V, 18.0 708682 XACTA Saw Xacta Fence Options Amps Amps Riving Knife, Low Profile, for Deluxe Left Tilt, Riving Knife, 708683 XACTA Saw 30” Rip Capacity, 29-1/8” x 16” 708674PK 708676PK Extension Table Riving Knife, Low Profile Thin Kerf, for 708684 Deluxe XACTA Saw Left Tilt, Riving Knife, 50” Rip Capacity, 29-1/8” x 36” 708675PK 708677PK Dado Insert for Deluxe XACTA Saw 708097 Extension Table with Legs Universal Mobile Base 708118 XACTASAW Deluxe Left with 708678PK 708679PK Mobile Base Extension Kit (for 50” models) 708158 50" Rip and Downdraft Table TABLE SAWS 7 10" PROSHOP SHOP™ TABLE SAW WITH RIVING KNIFE FEATURES • Riving knife maintains close blade STOCK NUMBER 708492K 708493K 708494K 708495K proximity to reduce chance of Blade Diameter (In.) 10 10 10 10 kickback Arbor Diameter (In.) 5/8 5/8 5/8 5/8 Arbor Speed (RPM) 4000 4000 4000 4000 • Integrated arbor lock is accessed from table top for rapid blade Maximum Depth of Cut (In.) 3-1/8 3-1/8 3-1/8 3-1/8 Maximum Depth of Cut at change 2-1/8 2-1/8 2-1/8 2-1/8 45 Degrees (In.) • Blade guard and riving knife have Maximum Rip Left of Blade (In.) 12 12 12 12 quick release for tool-less Maximum Rip Right of Blade (In.) 30 52 30 52 mounting and removal Table in Front of Saw Blade at 10 10 10 10 • Enclosed cabinet with exclusive leg Maximum Depth of Cut (In.) stand design for easy assembly Maximum Diameter of Dado (In.) 8 8 8 8 Maximum Width of Dado (In.) 13/16 13/16 13/16 13/16 • Heavy duty cast iron table with Table Type Steel Steel Cast Iron Cast Iron T-style miter gauge slot Table Size with Extension (L x W) (In.) 27 x 44 27 x 44 27 x 44 27 x 44 • Sloped cabinet floor and 4” Miter Gauge Type T-Slot with Stops T-Slot with Stops T-Slot with Stops T-Slot with Stops extraction port enhance dust Dust Collection Minimum 350 350 350 350 collection efficiency CFM Required (CFM) • Easy-to-reach control switch Dust Port Outside Diameter (In.) 4 4 4 4 Motor Amps 15/7 15/7 15/7 15/7 • Rigid, left-tilting cast iron trunnion Motor Power (HP) 1-3/4 1-3/4 1-3/4 1-3/4 Powder coated paint for a long- • Motor Phase (PH) 1 1 1 1 lasting, chip-resistant finish Motor Voltage (V) 115/230 115/230 115/230 115/230 • 10” blade included Prewired Voltage (V) 115 115 115 115 Net Weight (lbs.) 252 302 292 342 OPTIONAL ACCESSORIES Dado Insert, for ProShop 708489 Heavy Duty Universal Mobile Base 708119 Mobile Base Extension Kit (for 52" models) 708158 8 TABLE SAWS 10" JOBSITE TABLE SAW FEATURES • Easy folding stand for convenient storage, quick STOCK NUMBER 707000 setup, and portability on the job site Arbor Diameter (In.) 5/8 Arbor Speed (RPM) 4000 • Rubber hand grips on each end of the table allow Blade Diameter (In.) 10 you to conveniently carry without stand Dust Port Outside Diameter (In.) 2-1/2 Unique base design allows for adequate tool • Maximum Depth of Cut (In.) 3-1/16 storage on the job site Maximum Depth of Cut at 45 Degrees (In.) 2-1/2 • Heavy-Duty 15 Amp motor with soft start Maximum Diameter of Dado (In.) 10 • Large telescoping extension wing provides a wide Maximum Rip Left of Blade (In.) 11 25” ripping capacity Maximum Rip Right of Blade (In.) 25 • Unique dust shroud design enhances dust and Maximum Width of Dado (In.) 5/32 chip removal Motor Amps 15 Motor Phase (PH) 1 • Aluminum extruded rails ensure a square fence and Motor Voltage (V) 115 sliding precision Prewired Voltage (V) 115 • Rear extension provides out feed support and keeps Net Weight (lbs.) 91 the workpiece flat • Riving knife system reduces chance of kickback TABLE SAWS 9 10 BANDSAWS DESIGNED TO EXCEED EXPECTATIONS BANDSAWS JET Bandsaws have what every great bandsaw should: capacity, precision, and power. With up to a 5 horsepower motor and ranging from 10'' to 20'', you will achieve a greater level of performance than ever before. With even larger resaw capacities, redesigned fence system, and enhanced features JET Bandsaws are designed to exceed expectations. BANDSAWS 11 20" BANDSAWS WITH QUICK TENSION FEATURES • Triangular design provides superior column rigidity • 12-1/4" Resaw capacity for cutting large pieces of wood, slicing veneers and cutting book matched panels • 21" x 21" precision ground cast iron table for added stability and work support • 2 Speed poly V-belt drive • 8-spoke, precision computer balanced wheels eliminate vibration for accurate blade tracking • Foot brake for rapid stops • Upper and lower ball bearing, micro-adjustable blade STOCK NUMBER 708754B 708755B guides for quick and easy adjustments and smooth Model Number JWBS-20QT-3 JWBS-20QT-5 operation Cutting Capacity Width (In.) 20 20 • Rigid, heavy-duty guide post with rack and pinion Cutting Capacity Height (In.) 12-1/4 12-1/4 adjustment for extra blade support Blade Length (In.) 150 150 • All cast iron handwheels make smooth, easy blade Blade Speed (SFPM) 1800/3200 1800/3200 adjustments with less effort Maximum Saw Blade Width (In.) 1-1/2 1-1/2 Minimum Saw Blade Width (In.) 1/8 1/8 • 1", 3 TPI woodworking
Recommended publications
  • VARIABLE SPEED BELT SANDER Operator’S Manual
    241-9801 3” X 21” VARIABLE SPEED BELT SANDER Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference. IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. ! READ ALL INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. CONSIDER WORK AREA ENVIRONMENT. Don’t use power tools in damp, wet, or poorly lit locations. Don’t expose your tool to rain. Keep the work area well lit. Don’t use tools in the presence of flammable gases or liquids. 3. KEEP CHILDREN AND BYSTANDERS AWAY. All children should be kept away from the work area. Don’t let them handle machines, tools or extension cords. Visitors can be a distraction and are difficult to protect from injury. 4. GROUNDED TOOLS must be plugged into an outlet that itself is properly installed and grounded. Grounding provides a low-resistance path to carry electricity away from the operator, should the tool malfunction electrically. Do not remove the grounding prong from the plug or alter the plug in any way. If in doubt as to whether the outlet is properly grounded according to code, check with a qualified electrician. 5. OBSERVE PROPER PRECAUTIONS REGARDING DOUBLE INSULA- TION. This tool is double insulated. It is equipped with a polarized plug. One blade is wider than the other, so it will fit into a polarized outlet only one way.
    [Show full text]
  • BD4603 Belt Disc Sander
    BD4603 4×6 " BELT DISC SANDER CONTACT US:[email protected] IMPORTANT: For your own safety, read and follow all of the Safety INSTRUCTION Guidelines and Operating Instructions before operating MANUAL this product. BD4603 2 TABLE OF CONTENTS Specifications 2 Safety guidelines 3 Package contents 9 Key parts diagram 10 Operating instructions 11 Maintenance 16 Troubleshooting 18 Exploded view 19 Parts list 20 Warranty 23 TABLE OF CONTENTS TABLE SPECIFICATIONS Motor 120VAC, 60Hz , 5.0A Speed (no load) 3450RPM Belt size 4" x 36" Belt speed 2161 FPM Disc size 6" Disc speed 3450RPM 3 BD4603 SAFETY GUIDELINES - DEFINITIONS • Always wear safety goggles or safety glasses with side shields. Specifications 2 • Always wear respiratory and hearing protection. • To reduce the risk of injury, user and all bystanders must read and understand instruction manual before using this product. • Failure to keep your hands away from the moving part and cutting surface will result in serious personal injury. • No children or pregnant women should enter the work area where the paint sanding is being done until all clean up is completed. • A dust mask or respirator should be worn by all persons entering the work area. The filter should be replaced daily or whenever the wearer has difficulty breathing. • NO EATING, DRINKING or SMOKING should be done in the work area to prevent ingesting contaminated paint particles. Workers should wash and clean up BEFORE eating, drinking or smoking. Articles of food, drink, or smoking should not be left in the work area where dust would settle on them. • Paint should be removed in such a manner as to minimize the amount of dust generated.
    [Show full text]
  • A Belt Sander Is a Machine Which Has a Revolving Abrasive Belt Used To
    Procedure No.: SS-MHA-BLTSNDR EH&S/General Safety Shop Safety Program Authorized/Approved By: Title: Shop Equipment Hazard Analysis & Management Form Issue Date: Review Date: Page Number: 1 of 4 1. Hazard Management Details - General Shop/Equipment Item: BELT SANDER Make/Model No.: Serial No.: Department: Work Location: Person(s) Conducting Hazard Analysis: JOHN M. SEAMAN Date Conducted: May 3, 2013 Campus General Safety Specialist Equipment Photo: Description of Use: Summary of Key Risks: (refer to appropriate subsections) A belt sander is a machine which • Entanglement has a revolving abrasive belt used to • Trauma (Impact/Cutting/Friction) sand down wood and other materials • Inhalation for finishing purposes. • Eye Injury • Hand/Foot Injury • Noise • Fire/Explosion • Electrical Shock Forward completed forms to EH&S General Safety for approval prior to use. Forms may be sent via email to [email protected]. Procedure No.: SS-MHA-BLTSNDR EH&S/General Safety Shop Safety Program Equipment/Machine: BELT SANDER Title: Shop Equipment Hazard Analysis & Management Form Issue Date: Review Date: Page Number: 2 of 4 2. Documentation: Relevant Legislation/Standards Y / N Comments: a. Is equipment required to be registered? Y N b. Is a user license/Certification required? Y N c. Key Reference Materials Required: Manufacturer’s Operator’s Manual (specifically safety features) General Requirements: OSHA 29 CFR 1910.132 Machine Safeguarding: OSHA 29 CFR 1910.213(p)(2), 1910.213(p)(3) and 1910.219. Hearing Conservation: OSHA 29 CFR 1910.95 https://www.osha.gov/SLTC/etools/woodworking/production_sanders.html Equipment Documentation Y / N Comments: a. Are operator’s manuals accessible? Y N b.
    [Show full text]
  • Start with a Safe Work Area Electricity Can Be Dangerous General Safety
    General Safety All power tools can be dangerous if both general and tool specific safety instructions are not followed carefully. General safety instructions apply to all power tools, both corded and cordless. Start with a Safe Work Area Rules about Extension Cords Keep your work area clean and well lit. Cluttered • When using a power tool outside, use an exten- benches and dark areas invite accidents. sion cord marked for outdoor use with “W-A” or Do not operate power tools in explosive atmo- “W”. These cords are made for outdoor use. spheres, near flammable liquids, gases, or dust. • Extension cords with 3-prong grounding plugs Power tools create sparks, which may ignite the must be plugged into 3-prong outlets when using dust or fumes. grounded tools. • Keep bystanders, children, and visitors away • Replace damaged or worn cords immediately. when using a power tool. Distractions can cause you to lose control. The wire gauge and length of the extension cord Electricity can be Dangerous must be able to handle the amps of the tool. Find the Amps (A) on the tool’s nameplate and Grounded tools (three pronged cords) must use the chart to determine the necessary wire be plugged into a properly grounded installed outlet. gauge for your extension cord length. Never remove or cut off the grounding prong or modify the plug in any way. Do not use any adapter plugs. Double Insulated tools have a polarized plug 16 (one blade is wider than the other.) This plug will 16 16 fit into an outlet only one way.
    [Show full text]
  • 7 Aeo4ere A577 Orzas W Z Zzz Za Zaro to a B Y
    April 6, 1954 T. B. THOMAS ETAL 2,674,070 BELT SANDER Filed April 24, 1953 2 Sheets-Sheet l GS4 Sasayas INVENTORs 7 Aeo4ere A577 orzas W z zzz za ZAro to a B Y ATTORNEY April 6, 1954 T. B. THOMAS ETA 2,674,070 BELT SANDER Filed April 24, 1953 2 Sheets-Sheet 2 s NSNSNSAs4AA Yaaaaaaayaa Geese easy INVENTOR6 EsS Z/ze odore AZA or as Z2% FXX 88 a sasawawa %2. MeBY 722 z za za ZAre zo-ra. TTORNEY Patented Apr. 6, 1954 2,674,070 UNITED STATES PATENT OFFICE 2,674,070 BELT SANDER, Theodore B. Thomas and Virginia L. Brown, New London, Wis. Application April 24, 1953, Serial No. 350,966 8 Claims. 1. (C. 51-135) This invention relates to a novel form of belt 2 Sander and more particularly to a belt sander belt sander attachment in its entirety and com which is constructed to be utilized as a drill press prising the invention is designated generally 0 attachment utilizing the power furnished by the and includes an elongated base plate having a drill press for driving the sanding belt including narrow extension 2 constituting One end thereof a pulley Speed changer, which is conventional and which forms an extension of one side edge With drill presses, for varying the speed at which 3 of said base plate. the belt will be driven to thereby increase the Said narrow end 2 is provided with a pair of Versatility of the Sanding attachment. transversely spaced upwardly extending apertured Another object of the invention is to provide standards 4 to receive therebetween a portion of a belt sander including a drive pulley which is an elongated Supporting member 5 which is piv Separate from the remaining parts of the sander otally supported on said standards 4 by a pivot attachment and supported by a drill chuck where pin 6 which extends therethrough and through by endless sanding belts of different lengths may a portion of the support 5, for rocking movement be interchangeably employed with the sander at of Said Support in a vertical plane.
    [Show full text]
  • Safety Manual for the Armstrong Machine Shops AR-112 AR-127
    Safety Manual for the Armstrong Machine Shops AR-112 AR-127 The College of New Jersey School of Engineering 10 December 2004 revised 14 Jan 2016 Table of Contents Shop Safety, Hours and Phones . 2 Floor Plans. 3 General Shop Safety Rules . 5 Drill Press Safety Rules . 7 Lathe Safety Rules . 8 Milling Machine Safety Rules . 9 Grinding Safety Rules . .10 Band Saw Safety Rules . .10 Horizontal Band Saw Safety Rules . 11 Table Saw Safety Rules . 12 Radial Arm Saw Safety Rules . 13 Squaring Shear Safety Rules . 13 Power Break Safety Rules . 13 Hydraulic Press Safety Rules . 14 Power Hand (Skill) Saw Safety Rules . 15 Disc And Belt Sander Safety Rules . 16 Scroll Saw Safety Rules . 16 Welding Safety Rules . 17 Working With Solvents And Resins Safety Rules . .18 Heavy Sanding Of Wood And Foam Safety Rules . 18 Vacuum Forming Equipment Safety Rules . 19 Injection Molder Safety Rules . .19 Hot Wire Cutter Safety Rules . 19 SHOP SAFETY 1 of 19 The first step in preventing personal injury in a machine shop is to make sure that you are familiar with and know how to operate the equipment you will be using. If you are not sure if a machine is operating properly, shut it off and ask the Area Supervisor. Attending a Safety Lecture or reading the Safety Manual, passing the Safety Test, and reading Equipment Safety Rules ONLY give you permission to access the shops. YOU MUST ADDITIONALLY RECEIVE INSTRUCTION FROM AN AREA SUPERVISOR IN ORDER TO OPERATE ANY EQUIPMENT. The Safety Lecture and Test must be repeated every year.
    [Show full text]
  • 6 Mistakes Not to Make Building a Farmhouse Table
    instructables 6 Mistakes Not to Make Building a Farmhouse Table by makeorbreakshop It's been two years since I built my very first farmhouse table. At the time I was getting into woodworking and did my best to follow along with the great plans you can find online. Recently I built a few farmhouse tables for my friends. Here are the 6 biggest mistakes I made and how I changed them. Tools Jointer Planer Table Saw Drill/Driver Combo 6 in Measuring Square #4 Hand Plane Belt Sander Check out the rest of my tools here. https://youtu.be/1h43STNsrpg 6 Mistakes Not to Make Building a Farmhouse Table: Page 1 Step 1: Mistake 1: Crooked Table Top Edges One of the biggest things I underestimated when I first got into woodworking was the importance of having square and flat wood. I mean when you buy construction grade pine from the big box store it should be perfect right? Wrong. Oh so wrong. There is an entire art and science to getting your stock ready for construction. For this build I used the following process: 1. Using a jointer to joint the top surface of the board. 2. Using the flat surface as a reference against the fence of the jointer to get a straight and square edge. 3. Using a planer to flatten the bottom surface of the board. 4. Using either a jointer or table saw to flatten and square the remaining edge. What if you don't have a jointer and/or a table saw? At the very least I would cut off the rounded edges you typically find on construction grade pine lumber.
    [Show full text]
  • STYLE GUIDE – SANDER and SAW
    STYLE GUIDE – SANDER and SAW This document is intended as a guidance to create effective, accurate product listings to improve your business potential. Amazon product detail page shows information about the product - including title, bullet points, product description and images. This information is crucial to ensure customers find and purchase your products. Providing a consistent format for your listings will better inform customers and enhance product discovery. In addition to using this document, we encourage you take advantage of the information available in our ‘Help pages’. 1. Title Guidelines: Product title is the first thing customers see when searching for a product. It is vital to have crisp and informative title for customers to find your products when they visit Amazon.in or search online. Recommended title format to use while listing Tent and related products: For the Parent and Standalone or Child of Variation Products for SANDER and SAW [Brand Name] + [Power Source Type] + [Name of the Product] + With + [Included Components] Examples for SANDER: 1. Bosch Corded Random Orbit Sander with Dust Collector and Carry Bag 2. Makita Corded Belt Sander with Abrasive Belt, 80G Belt and Dust Bag 3. RYOBI Cordless Sheet Sander with Batteries, Charger, Dust Collector and Bag Examples for SAW: 1. RYOBI Cordless Circular Saw with Lithium Ion Battery 2. DEWALT Cord Reciprocating Saw (Tool-Only) 3. DEWALT Cordless Band Saw Kit with (2) Batteries 5Ah, Charger and Case Sample values for [Name of the Product] under SANDERS and SAW: Belt Sanders; Combination disc & Belt Sanders; Detail Sanders; Disc Sanders; Sheet SANDER Sanders; Random Orbit Sanders; Drum Sanders etc, Saws; Band Saws; Circular Saws; Jig Saws; Metal cutting saws; Miter saws; Plunge Saws; SAW Reciprocating saws; Table Saws; Tile & Masonry saws etc, What to Do What Not to Do Capitalize the first letter of each word.
    [Show full text]
  • Building Bigger Things
    Building Bigger Things Unit III Member Manual National 4-H Wood Science Series 4-H 4423 Reprinted September 2006 Building Bigger Things Acknowledgement Contents This educational material has been prepared for 4-H use by the National 4-H Note to Parents and Home Helpers ...........................................2 Wood Science Committee composed of Introduction ...................................................................................3 representatives of Extension Service, U. S. Department of Agriculture, and the Learning About the Forest Products Industry ..........................4 Cooperative Extension Services of the State Economics of the Forest Products Industry ...........................5 Land Grant Universities. Special thanks are Careers in the Wood Products Industry .................................6 extended to the Weyerhaeuser Company Learning More About Wood Itself ..............................................7 Foundation for financial and technical Names of Woods (Wood Species) ............................................7 assistance. This material is published by the National 4-H Council, 7100 Connecticut Structure of Wood ......................................................................8 Avenue, Chevy Chase, MD 20815. Identifying Hardwoods and Softwoods by National 4-H Council is a not-for-profit Structure and Appearance ....................................................10 educational organization that utilizes private How Moisture Affects Wood .................................................11 resources
    [Show full text]
  • Power Tools Dependable Tools • Reliable Brand • Affordable Price
    Power Tool Catalog The Right Tool for the Right Project Power Tools Dependable Tools • Reliable Brand • Affordable Price Introducing Alltrade Trades Pro® power tools, a complete assortment of the most popular power tools with competitive features at affordable price points. Perfect for the basic maintenance projects value-conscious homeowners need to tackle from time-to-time. With an extensive range of cordless portable power tools, electric portable power tools and bench top tools, Alltrade Trades Pro® caters to every customer’s category requirements. The tools offer outstanding features, dependable quality and are backed by a solid warranty to ensure end-user satisfaction. Our high-impact packaging is attractive, informative and communicates brand reliability and value to the consumer. We are committed to delivering the very best value for the price. Alltrade Trades Pro® has what you need for sales success! 2 Cordless Power Tools 836777 836774 4.8 Volt 3-Position Cordless Screwdriver 14.4 Volt Cordless Drill/Driver • Handle locks in 3 positions • 3/8” keyless chuck, 16 position clutch • Built-in worklight, auto spindle lock • Variable speed trigger, electric brake • Includes 4 pc. 2” power bits • Includes battery and 5-8 hour charger UPC: 028907-340135 Case Qty: 10 Shelf Qty: 10 UPC: 028907-340104 Case Qty: 8 Shelf Qty: 8 836710 836840 18 Volt Cordless Drill/Driver 18 Volt Cordless Drill/Driver & Worklight • 3/8” keyless chuck, 16 position clutch • 3/8” keyless chuck, 16 position clutch • Variable speed trigger, electric brake • Variable speed trigger, electric brake • Includes battery and 5-8 hour charger • Includes worklight, battery and 5-8 hour charger UPC: 028907-338439 Case Qty: 8 Shelf Qty: 8 UPC: 28907-344065 Case Qty: 6 Shelf Qty: 6 836785 24 Volt Cordless Drill/Driver Kit • 3/8” keyless chuck, 25 position clutch • Variable speed trigger, electric brake • Includes battery, 5-8 hour charger, 13 pc.
    [Show full text]
  • Woodworking Glossary, a Comprehensive List of Woodworking Terms and Their Definitions That Will Help You Understand More About Woodworking
    Welcome to the Woodworking Glossary, a comprehensive list of woodworking terms and their definitions that will help you understand more about woodworking. Each word has a complete definition, and several have links to other pages that further explain the term. Enjoy. Woodworking Glossary A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | #'s | A | A-Frame This is a common and strong building and construction shape where you place two side pieces in the orientation of the legs of a letter "A" shape, and then cross brace the middle. This is useful on project ends, and bases where strength is needed. Abrasive Abrasive is a term use to describe sandpaper typically. This is a material that grinds or abrades material, most commonly wood, to change the surface texture. Using Abrasive papers means using sandpaper in most cases, and you can use it on wood, or on a finish in between coats or for leveling. Absolute Humidity The absolute humidity of the air is a measurement of the amount of water that is in the air. This is without regard to the temperature, and is a measure of how much water vapor is being held in the surrounding air. Acetone Acetone is a solvent that you can use to clean parts, or remove grease. Acetone is useful for removing and cutting grease on a wooden bench top that has become contaminated with oil. Across the Grain When looking at the grain of a piece of wood, if you were to scratch the piece perpendicular to the direction of the grain, this would be an across the grain scratch.
    [Show full text]
  • Pneumatic Mini Belt Sander #505750, JAT-750 #505751, JAT-751 #505752, JAT-752
    Pneumatic Mini Belt Sander #505750, JAT-750 #505751, JAT-751 #505752, JAT-752 JAT-750 JAT-752 JAT-751 Operation & Parts Manual M-505750 Edition 3 11/2018 JET 427 New Sanford Road LaVergne, TN 37086 Ph.: 800-274-6848 www.jettools.com Copyright © 2015 JET Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. JET products carry a limited warranty which varies in duration based upon the product. (See chart below) Accessories carry a limited warranty of one year from the date of receipt. Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects. Who is Covered This warranty covers only the initial purchaser of the product from the date of delivery. What is Covered This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials outside recommended guidelines, may void the warranty.
    [Show full text]