DOCSLIB.ORG

Car Ball Joint Service Kit Truck/Van/SUV Ball

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Car Ball Joint Service Kit Truck/Van/SUV Ball Questions? Call AutoZone® Tool & Equipment Customer Service: 1-877-AZTool1 (1-877-298-6651) Service Tools OTC Ball Joint Sets Ball Joint Sets Car Ball Joint Service Kit Truck/Van/SUV Ball/U-Joint Ball/U-Joint Press Set SKU 291455 99 Ball Joint Service Kit Press w/4WD Ball SKU 557231 00 6529 529 SKU 291456 99 Joint Service 27023 100 • Information At Your Fingertips – the Comprehensive 6539 Set STORE STOCK Manual Includes Diagrams With Instructions - 599 • This 55+ Piece Kit Covers Press-in Ball Joints on the • Removes and Eliminating Guesswork of Which Adapters Following Truck/Van/SUV Applications; Toyota, Hyundai, KIA, SKU 516524 Are Required Replaces Ball Infinity, Isuzu, Nissan, Chrysler, Dodge, Jeep, Plymouth, 27089 Joints on Many • New Car Kit With Manual Covers Vehicles Thru 2008 Mitsubishi, Ford, Lincoln, Mercury, Mazda, Chevrolet, Buick, Oldsmobile, Pontiac, Cadillac, GMC, Hummer 99 Vehicles • Information At Your Fingertips – the Comprehensive 139 • C-Clamp Frame Manual Includes Diagrams With Instructions - Eliminating Press May Also Guesswork Of Which Adapters Are Required. • 1967 to Current 1/2 to 3/4 Ton 4WD be Used to • New Truck/Van/SUV kit with Manual Covers • Dana 44 Series Front Axle Remove and Replace U-Joints Vehicles Thru 2008 Ball Joint Adapter Sets for 27023 or 27089 Ford Ball Joint Adapter Set SKU 948082 00 BMW Ball Joint Adapter Set (11 Pc) 27163 85 SKU 291489 99 STORE STOCK 6529-1 109 • Ford Taurus and Mercury Sable • Works On 1992 – 1999 318 Series, 1998 – 1999 323 Series, 1996 – 1999 328 Series, 1996 – 1999 M3 Honda Ball Joint Adapter Set Import Truck Ball Joint Adapter Set (35 Pc) Chrysler/Mitsubishi Ball Joint Adapter Set SKU 948074 00 (20 Pc) SKU 291497 99 27164 110 6539-1 SKU 291491 99 319 STORE STOCK 6529-2 219 • Works On 1996-2008 Toyota, Honda, Acura, Hyundai, Kia, • 1980-2000 Honda Accord, Infinity, Isuzu, and Nissan Trucks, Vans, and SUV’s With Civic, CRX and Prelude • Works On 1996 – 2008 Chrysler, Dodge, Plymouth, And Press In Ball Joints Mitsubishi Cars With Press In Ball Joints Ford/Mazda Ball Joint Adapter Set (25 Pc) Chrysler/Mitsubishi Truck Ball 4 Wheel Drive Ball Joint Adapter Set Joint Adapter Set (35 Pc) SKU 291492 99 SKU 948075 00 Ball Joint Service Kit 6529-3 SKU 291499 99 27165 85 299 6539-2 349 SKU 119334 99 • Works On 1996 – 2008 Ford, Lincoln, Mercury, And STORE STOCK 7249 Mazda Cars With Press In Ball Joints • Works On 1996-2008 Chrysler, Dodge, Jeep, Plymouth, • 4WD Ford, GM, and Dodge 110 And Mitsubishi Trucks, Vans, and SUV’s With Press In with Dana 44 Axle, Upper and Lower • Removes and Installs Press-Fit Parts GM Ball Joint Adapter Set (18 Pc) Ball Joints Such as Ball Joints, Universal Joints and Truck Brake Anchor Pins SKU 291493 99 Ford/Mazda Truck Ball Joint Adapter Set 2 Wheel Drive Ball Joint Adapter Set • Contains: 3 Receiver Tubes (2-3/4” I.D. 6529-4 174 (32 Pc) x 3” O.D., 2-1/4” I.D. x 2-1/2” O.D. and SKU 948076 00 1-3/4” I.D. x 2” O.D.) • Works On 1996 – 2008 Chevrolet, Buick, Pontiac, SKU 291502 99 27166 Oldsmobile, and Cadillac Cars With Press In Ball Joints 6539-3 85 • Installation and Removing Adapters: 1 279 STORE STOCK Installing Cup, 1 Receiving Cup and 1 • Works On 1996-2008 Ford, Lincoln, Mercury, and Mazda Installing Adapter Honda/Acira Ball Joint Adapter Set (19 Pc) Trucks, Vans, and SUV’s With Press In Ball Joints • Ford Van 2WD, SKU 291494 99 Upper and Lower 6529-5 219 GM Truck Ball Joint Adapter Set (28 Pc) • Works On 1996 – 2008 Honda and Acura Cars With SKU 291503 99 Press In Ball Joints 6539-4 279 Hose Clamp Pliers • Works On 1996-2008 Buick, Cadillac, Oldsmobile, Pontiac, Import Ball Joint Adapter Set (15 Pc) Chevrolet, GMC, and Hummer Trucks, Vans, and SUV’s 2 Piece Hose 5 Piece Hose Clamp Plier Set SKU 291495 99 With Press In Ball Joints Clamp Pliers 6529-6 SKU 965836 99 119 Master Truck Ball Joint Adapter Set (18 Pc) SKU 27159 • Works On 1996 – 2008 Toyota, Hyundia, Kia, Infinity, 972767 99 39 Saab, and Nissan Cars With Press In Ball Joints SKU 291498 99 25198 20 • Services Most Ring-Type or 6539-10 249 • Services Most Flat-Band Hose Clamps Master Car Ball Joint Adapter Set (14 Pc) • 18 Additional Adapters Required to Complete a 6539 Ring-Type or Flat-Band • Jaws Swivel to Access Hose Hose Clamps Clamps in Any Position SKU 291490 Truck Ball Joint Master Set When Added tothe 6529 99 Car Ball Joint Adapter Set • Jaws Swivel to Access 6529-10 174 Hose Clamps in Any Position • 14 Additional Adapters Required to Complete a 6529 Car Ball Joint Master Set When Added to the 6539 Truck Ball Joint Adapter Set. C-Frame Press Hose Angle Tip Ball Joint Application Guide SKU 499640 99 Clamp Pliers Lock Ring Pliers 7248 119 SKU 607069 SKU 191055 99 SKU 291496 99 • to be used in conjunction with all OTC Ball Joint Adapters 25246 25354 6529MAN-08 • Can Also Be Used for Removing/Installing; Universal 12 64 STORE STOCK • Used to Spread Snap Rings Found On Brakes, Pedal • New Application Guide to Cover all Car and Truck/Van/ Joints With Needle Bearings, Pressed In Wheel Studs, and Brake Anchor Pins On Heavy Duty Vehicles Shafts, Clutch Shafts, Transmissions, Machine Tools SUV Makes and Models Thru 2008 99 and Some Piston Rings 34 • Jaws Are Scored on the Outside for Secure Gripping • Removes Plastic and • Spring Loaded Jaws CV Boot Tools Metal Self-Tightening Tubing Hose Clamps with • Spread: 3/4” Diameters of 11/16” • Length: 8 1/4:” FWD Axle Puller Adapter Double Flaring Tool Kit to 2-1/2” SKU 069341 SKU 002061 00 27015 27058 20 Torque Wrenches 00 Turn any Ratchet or Breaker Bar STORE STOCK into a Digital Torque Wrench! • Used to Pull CV Drive Axles from the 30 3/4” Drive Torque Wrench STORE STOCK Transmission of Front Wheel Drive Cars 100-600 Ft/Lbs Range • Right Hand 3/8” Drive Digital Note: Use with OEM Slide Hammer #27033 • Produces Single and Double Flares in Soft Steel Torque Adapter SKU 217376 99 Direction Heavy Duty 25688 299 SKU 362559 99 Tubing Bender 25684 49 • Range 27-135 NM (238.9-1194.8 In/Lb) SKU 391367 00 CV Boot Clamp Tool 27134 20 1/2” Drive SKU 002058 99 STORE STOCK 1/4” Drive Torque Screwdriver Digital Torque Adapter 27056 • Used to Make Left, Right and Offset Bends Up 7 to 90° 1/4”, 5/16” and 3/8” (4, 6 and 8mm) OD SKU 209522 99 SKU 900805 99 • For Installing Band Style Clamps That Require the Aluminum, Copper and Stainless Steel Tubing 27172 25682 Tensions be Maintained While the Band is 79 59 Locked Into Place STORE STOCK • Great for Low Torque Applications • Range 40-200N-M (29.5-147.5 Ft/Lb) • Range: 10-50 In/Lb • Easy to Read Window Scale • Buzzes When Target Torque is Reached Mini Tubing Tubing Cutter Cutter CV Boot Pliers Professional 3/8” Drive SKU 532507 99 SKU 141489 99 Micrometer SKU 002068 00 25058 25299 10-100 Ft/Lbs Range 6 7 Adjustable Torque SKU 133658 27055 15 STORE STOCK STORE STOCK Wrenches 99 • Plier Designed for Use on Earless Type Clamps Including • Capacity: 1/8” to 7/8” • Capacity: 1/8” to 1-1/8” 25686 49 Those Found on Late Model GM Inboard CV Joints • Overall Length 7-1/2” (19cm) Tubing Bender Pliers Innovative 3/8” Drive Design 25-250 In/Lbs Range 3/4" Drive Torque Multiplier SKU 265107 99 CV Boot Driver 25170 Bends 3/16” • Precision Torque Control by SKU 133657 99 SKU 191056 99 49 and 1/4” Tubing 45 Tooth Ratchet Head 25685 25683 299 SKU • Can be used as 3/16” Tubing 49 555409 99 Bender Pliers and 1/4” • Audible Click When Desired • Increase Torque Output 27052 34 Brake Line Bender Pliers Torque is Reached 1/2” Drive • It Utilizes a 3:1 Ratio Planetary Gear Set to Convert • Removes and Installs Many • Bends all Types of 3/16” Brake • Both Clockwise and Counter- Low Torque (max. 650 Ft./Lbs) to High Torque Boots on GM Constant Velocity Joints Lines and 1/4” OD Tubing Clockwise Operation 25-250 Ft/Lbs Range (2200 Ft.Lbs/3000 N-M) for Heavy-duty Tightening Having Stamped Retaining Rings Without Kinking or Flattening, • High Grade Spring Steel SKU 133659 99 or Loosening. Input drive 3/4", output drive 1" Especially in Tight Spots Torque Mechanism 25687 79 • Comes with a 3/4” Drive 2-way Quick Release Ratchet Prices Subject To Change Without Notice. 29 Service Tools Pullers Timing Gear Harmonic Balancer Puller Kit Harmonic Balancer/ and Pulley Set Steering Wheel Puller SKU 555524 00 SKU 555508 00 27019 20 for Two or Three-Hole Ap- SKU 532440 49 27009 STORE STOCK plications, Floating Swivel 25053 17 15 Prevents Damage to the STORE STOCK • Used to Remove Harmonic Shaft Ends and the Yoke is STORE STOCK • Services Crankshaft Balancers, Vibration Damp- Heat-Treated Alloy Steel for • Removes Balancers, Steering Wheels, Pulleys and Timing Gears eners, Pulleys or Gears Strength and Durability Pulleys and/or Gears with Tapped Holes on Gasoline and Diesel • Kit Features Four Yoke Slots • Set Includes Yoke, Pressure • Floating Swivel Helps Prevent Damage to Shaft End Powered Engines • 4 Slots in Yoke, Use for 2 or 3 Hole Applications with 3/8”-24, Allowing Unit to be Used Screw and Pulling Screws 5/16”-18 and 3/8”-16 Bolt Sizes Pulley Puller/ Installer Kit Harmonic Steering Wheel and Lock Balancer Plate Puller Kit SKU 002075 00 Installer 27031 40 SKU 900821 99 SKU 391373 00 27182 STORE STOCK 27144 49 • Used to Remove and 45 • Used to Pull Steering Wheels on Many Major Install Power Steering STORE STOCK Makes of Automobiles Pump Pulleys on Many • Used to Properly Install • Includes Yoke, Pressure Screw and Five Sets Domestic Vehicles Harmonic Balancers of Pulling Screws with Washers and Swivel 9-Way Slide Hammer Puller Set 7-Ton Bar-Type Puller/Bearing SKU 110811 99 Chrysler Separator Set 4579 99 5-Ton Bar-type Puller/
Load more

Recommended publications
  • Design and Analysis of Lower Control
    ISSN(Online) : 2319-8753 ISSN (Print) : 2347-6710 International Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297: 2007 Certified Organization) Vol. 5, Issue 4, April 2016 Design and Analysis of Lower Control ARM 1 2 M.Sridharan , Dr.S.Balamurugan P.G Student, Department of Mechanical Engineering, Mahendra Engineering College, Namakkal, Tamilnadu, India1 Head of the Department, Department of Mechanical Engineering, Mahendra Engineering College, Namakkal, Tamilnadu, India2 ABSTRACT: The main objective of this paper is to model and to perform structural analysis of a LOWER CONTROL ARM (LCA) used in the front suspension system, which is a sheet metal component. LCA is modeled in Pro-E software for the given specification. To analyze the LCA, CAE software is used. The load acting on the control arm are dynamic in nature, buckling load analysis is essential. First finite element analysis is performed to calculate the buckling strength, of a control arm. The FEA is carried out using Solid works stimulation package. The design modification has been done and FEA results are compared. The influencing parameters which are affecting the response are identified. After getting the final result of finite element analysis optimization has been done using design of experiment method. Taguchi’s design of experiments has been used to optimize the number of experiments. By reducing thickness of the sheet metal and by suggesting the suitable material the production cost of lower control arm is reduced. This leads to cost saving and improved material quality of the product. KEYWORDS: lower control arm, FEA, I. INTRODUCTION The suspension system caries the vehicle body and transmit all forces between the body and the road without transmitting to the driver and passengers.
    [Show full text]
  • Stress Analysis of a Suspension Control Arm Paula Andrea Chacón Santamaría, Alejandro Sierra, Octavio Andrés González Estrada
    Stress analysis of a suspension control arm Paula Andrea Chacón Santamaría, Alejandro Sierra, Octavio Andrés González Estrada To cite this version: Paula Andrea Chacón Santamaría, Alejandro Sierra, Octavio Andrés González Estrada. Stress analysis of a suspension control arm. [Research Report] Universidad Industrial de Santander. 2018. hal- 01916247 HAL Id: hal-01916247 https://hal.archives-ouvertes.fr/hal-01916247 Submitted on 8 Nov 2018 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. RESEARCH REPORT STRESS ANALYSIS OF A SUSPENSION CONTROL ARM Paula Andrea Chacón Santamaría Alejandro Sierra Octavio Andrés González-Estrada A010 Bucaramanga 2018 Research Group on Energy and Environment – GIEMA School of Mechanical Engineering Universidad Industrial de Santander P A Chacón Santamaría, A Sierra, O A González-Estrada, Stress analysis of a suspension control arm, School of Mechanical Engineering, Universidad Industrial de Santander. Research report, Bucaramanga, Colombia, 2018. Abstract: The suspension system of a vehicle absorbs energy to cushion and soften displacements in irregular terrains, and also supports its bodywork. Some of the components that allow the correct performance of the system are the control arms. This work aims to determine the stress distribution of a control arm for the rear suspension of a buggy vehicle.
    [Show full text]
  • Use Style: Paper Title
    ISSN XXXX XXXX © 2017 IJESC Research Article Volume 7 Issue No.9 Analysis of Upper Control Arm of Suspension System Bhushan S. Chakor1, Prof. Y.B. Choudhary2 Student (ME, Design Engineering)1, Associate Professor2 Department of Mechanical Engineering NDMVP’S KBT College of Engineering, SPPU, Maharashtra, India Abstract: Suspension system in automobile is always responsible for safety and driving comfort as the suspension carries the entire vehicle body and transmits all forces between road and body. Suspension system absorbs the vibrations due to rough terrains or road disturbances. Suspension system also provides stability under different conditions like accelerating, uneven road, cornering, braking, loading and unloading. Control arm is important part of suspension system as it joints steering knuckle to vehicle frame. In automotive industry structure optimization techniques was used for light weight and performance improvement of modern new cars. However, static load conditions could not represent all the various situations of automobile parts which subjected to complex loads those varying with time, especially for lower control arm of front suspension. This paper deals with transient structural analysis of the upper control arm of double wishbone suspension and modal analysis was carried out using ANSYS software. Keywords: Double wishbone suspension, Modal analysis, Steering knuckle, Transient structural analysis, ANSYS software. I. INTRODUCTION of the failure, finite element analysis is done to evaluate stress distribution and reliability of wishbone. Furthermore, the Control arm is one of the most important part of the suspension metallographic and hardness evaluation were done on weld system. Control arm is made from the materials like steel, iron seam of the failed part.
    [Show full text]
  • Comparison of the Friction Coefficient for Selected Car Suspensions Elements
    SCIENTIFIC PROCEEDINGS XXII INTERNATIONAL SCIENTIFIC-TECHNICAL CONFERENCE "trans & MOTAUTO ’14" ISSN 1310-3946 COMPARISON OF THE FRICTION COEFFICIENT FOR SELECTED CAR SUSPENSIONS ELEMENTS Ph.D. Eng. Wozniak M1, Prof. M.Sc. Ozuna G.2, Ph.D. Eng. De La Fuente P. 3, M.Sc. Eng. Jozwiak P.1, Prof. M.Sc. Pawelski Z.1 Department of Vehicles and Fundamentals of Machine Design – Lodz University of Technology, Poland Department of Industrial Engineering and Systems - University of Sonora, Mexico 2 Department of Fluid-Energy Machines - Ruhr-University Bochum, Germany 3 [email protected], [email protected], [email protected], [email protected], [email protected] Abstract: This paper presents values comparison of friction coefficient inside ball joints depending course given by the vehicle, period of exploitation and the vehicle brand. Friction coefficient were defined on the contact surface between steel ball joint pin and the ball joint seat made from plastic covered by PTFE. For the selected working pair of the elements comparison of friction coefficient in load function are done. The preform of the measurements methodology and the test bench are additional show in the paper. Keywords: BALL JOINT, FRICTION COEFFICIENT, PIVOTING FRICTION, STRING. 1 1. Introduction 6 N⋅⋅ 2 1 rk pm ax= The set of phenomenon’s in the contact area between two π 3 2 2 2 − ν1 11 − ν2 bodies in the rest, or moving towards oneself friction is called. As a + 1 EE 2 result of these phenomena’s resistance of motion are arises. A lot of (1) kinds of the friction are distinguish.
    [Show full text]
  • IFS1200/1320/1370 | Independent Front Suspension Maintenance Instructions Service Parts
    Motorhome Suspensions Owner’s Manual IFS1200/1320/1370 | Independent Front Suspension Maintenance Instructions Service Parts Document #: D9834 Revision: P Revision Date: 12/09 Reyco Granning Suspensions 1205 Industrial Park Drive Mount Vernon, MO 65712 1-800-753-0050 Phone: 417-466-2178 www. r eycogranning. c o m Fax: 417-466-3964 COMPANY PROFILE Reyco Granning Suspensions was formed by the merger and acquisition of two well-known names in the heavy-duty vehicle suspension industry: Reyco and Granning. Reyco grew out of the Reynolds Mfg. Co. and was first known as a major supplier of brake drums for heavy-duty vehicles, and later developed a full line of air and steel spring suspensions for trucks, busses, trailers, and motorhomes. Granning Air Suspensions was founded in 1949 in Detroit, Michigan as a manufacturer of auxiliary lift axle suspensions. Granning later became an innovator of independent front air suspensions for the motorhome industry. Reyco Granning LLC was formed in early 2011 through a partnering of senior managers and MAT Capital, a private investment group headquartered in Long Grove, Illinois. Reyco Granning manufacturing facilities are certified to the ISO9001:2008 standards, a globally recognized assurance that quality standards have been established and are maintained by regular rigorous audits. Service Notes This Service Manual describes the correct service and repair procedures for the ReycoGranning® IFS1200/1320/1370 Independent Front Suspension. The information contained in this manual was current at the time of printing and is subject to change without notice or liability. You must follow your company safety procedures when you service or repair the suspension.
    [Show full text]
  • Self-Aligning Exoskeleton Hip Joint: Kinematic Design with Five Revolute, Three Prismatic and One Ball Joint
    Self-Aligning Exoskeleton Hip Joint: Kinematic Design with Five Revolute, Three Prismatic and One Ball Joint Jonas Beil, Charlotte Marquardt and Tamim Asfour Abstract— Kinematic compatibility is of paramount impor- tance in wearable robotic and exoskeleton design. Misalign- ments between exoskeletons and anatomical joints of the human body result in interaction forces which make wearing the exoskeleton uncomfortable and even dangerous for the human. In this paper we present a kinematically compatible design of an exoskeleton hip to reduce kinematic incompatibilities, so called macro- and micro-misalignments, between the human’s and exoskeleton’s joint axes, which are caused by inter-subject variability and articulation. The resulting design consists of five revolute, three prismatic and one ball joint. Design parameters such as range of motion and joint velocities are calculated based on the analysis of human motion data acquired by motion capture systems. We show that the resulting design is capable of self-aligning to the human hip joint in all three anatomical planes during operation and can be adapted along the dorsoventral and mediolateral axis prior to operation. Calculation of the forward kinematics and FEM-simulation considering kinematic and musculoskeletal constraints proved sufficient mobility and stiffness of the system regarding the range of motion, angular velocity and torque admissibility needed to provide 50 % assistance for an 80 kg person. Fig. 1. A rendering of the hip exoskeleton prototype. I. INTRODUCTION In wearable robotics, considerable research efforts are directed at the design and development of exoskeletons, hip propagate to the knee and ankle joint or vice versa. The which fulfill the major requirement of comfortable and safe structure of the human hip joint as a ball joint with three wearability by a human user.
    [Show full text]
  • 23010231/2112 5414 by REGISTERED POST FAX : 011- 2617 1279 Air Headquarters Dte of Mechanical Transport West Block – VI, RK Puram, New Delhi – 110 066
    Tele : 23010231/2112 5414 BY REGISTERED POST FAX : 011- 2617 1279 Air Headquarters Dte of Mechanical transport West Block – VI, RK Puram, New Delhi – 110 066 Air HQ/63204/8/MT (T) 11 Jun 2018 M/s BVEL, Sahibabad, Ghaziabad M/s BEML, New Delhi M/s Brij Basi Hi-Tech Udyog Limited, New Delhi REQUEST FOR PROPOSAL / INVITATION OF QUOTATION FOR ANNUAL MAINTENANCE CONTRACT (AMC) OF QTY – 16 BEML ACFTs ON LTE BASIS AND TWO BID SYSTEM 1. Quotation in Two bid system (Technical and Commercial bid) in separate sealed cover is invited on LTE basis for AMC of Qty-16 BEML ACFTs held at various operating units of IAF. Please superscribe the above mentioned title, RFP number and date of opening of the Bids on the sealed cover to avoid the Bid being declared invalid. 2. This tender has been e-published on Govt. of India Central Public Procurement Portal on date _______ at e-procure.gov.in. To reach the site, please navigate as under: e-procure.gov.in ------ Tender Search ------ Org Name ----- Indian Air Force --- City New Delhi ----- Product Category… Aviation ----- Search Note: RFP will be visible as well as available for download till 15 min prior to original closing time of the RFP 3. General information about the tender:- (a) Tender reference No. Air HQ/63204/8/MT (T) dated 11 Jun 2018 (b) Last date and time for 05 Jul 2018 by 1100 hrs receipt of tenders (21 days from date of floating RFP) (c) Time and date for 05 Jul 2018 at 1130 hrs opening the tenders (21 days from date of floating RFP) (d) Place of opening of Tender opening Room tenders Air Headquarters, Vayu Bhawan New Delhi 110 106 (e) Address for Clarification Air Headquarters, Dte of Mechanical Transport, West Block VI, RK Puram, New Delhi-110 066 Signature of Seller 2 __________________________________________________________________________ (f) Contact person and DMT, Air HQ, RKP, New Delhi 110 066 Tele contact No.
    [Show full text]
  • Limited Lifetime Warranty
    ONLINE CHAT SKINNED KNUCKLES Limited Lifetime LARES ARTICLE CORPORATION Warranty Orest LazarowichPresents Looking Backward but Moving Forward A Continuing Series focused on the Repair and Restoration of your old Car and Truck. Steering Linkage Part 1 On the solid axle the movement of one wheel is dependent on the movement of the other On rear wheel drive vehicles the steering wheel on the axle. The steering knuckles which linkage consists of a number of steering rods that contain the spindles are connected to the axle by connect the steering gearbox to the front wheels. a kingpin. The steering linkage and thereby the They convert the rotary motion of the steering steering knuckles are connected by a single ad- wheel into angular motion of the front wheels so justable tie rod. The connection from the steering the vehicle can be steered to its destination. The gear box Pitman arm to the steering knuckle is type of steering linkage depends on whether the through a steering rod called the drag link. When front axle is solid ( I-beam) or independent front the driver turns the steering wheel the Pitman suspension (IFS). The solid axle was used on arm rotates and transfers the motion through the many early cars and trucks and is still used on drag link to the steering knuckle to turn the front many pickups and larger trucks. The vehicle wheels. weight is carried by flat springs or coil springs. The independent suspen- FRONT #! - Upper arm sion system is mounted on coil #2 - Wheel Knuckle springs and allows each of the SUSPENSION #3 - Stabilizer bar link wheels to move independently of #4 - Wheel bearing and hub the other one.
    [Show full text]
  • (Group 6) Steering
    (Group 6) Steering Buick used two types of steering linkages from 1961-1975, Saginaw and Thompson (Alternate). Saginaw original equipment can be identified by having a plastic plate, or a small "s" stamped on the plate. (see illustration A) Saginaw Idler arm assemblies will typically be a three-piece unit having a threaded steel bushing (see illustration B). The Saginaw Idler Arm Assembly with the metal plug design is an integral unit with the bracket (see illustration C). Saginaw centerlinks have ball studs that measure .587 (see illustration D). Saginaw linkage has straight joints (see Illustration E). .587 Illustration A Illustration B Illustration C Illustration D Illustration E Thompson or Alternate original equipment can be identified by a plain metal cover plate under the ball stud of each socket (see illustration E). Thompson Idler Arm assemblies are a one piece unit (see illustration F). Thompson centerlinks have ball studs that measure .556 (see illustration G). Thompson linkage has tapered joints (see illustration H). .556 Illustration E Illustration F Illustration G Illustration H 51 Steering (Group 6) Power Steering Hoses Steering Column Upper Bearing Kit 1969-1995 All. SBK695U.............................$49.50 ea. 1960-1966 Invicta, Wildcat, Electra, Est. Wagon. 1968 LeSabre. Steering Fiber Disc SH608P ..............................................................$21.50 ea. 1961-1975 Repair kit. 1964-1965 LeSabre with 300 engine. Pressure hose. SD570.......................................$22.25 ea. SH649P ..............................................................$40.75 ea. Steering Coupler 1961-1968 All 401, 425, 430 engines. Return hose. 1971-1972 All 455 engines. 1967-1977 All with power steering. SH592R ..............................................................$26.75 ea. SC677.......................................$39.50 ea. 1969-1970 All LeSabre, Estate Wagon, Electra.
    [Show full text]
  • The Modern Collectible
    SKINNED KNUCKLES LARES ARTICLE CORPORATION The Modern Collectible by Orest Lazarowich A DETAILED TECHNICAL COLUMN INTENDED TO TARGET MANY MAKES AND MODELS OF POST-WAR CARS AND PICK-UP TRUCKS Recirculating Ball Nut Type Steering Gear The Recirculating Ball In this type of steering gear, the end of the and Nut Steering Gear worm shaft is machined with a continuous helical groove. Precision finished helical grooves inside General Motors pioneered this design and the ball nut match the helical grooves on the the first application was for the 1940 Cadillac wormshaft which are filled with ball bearings. model 72. By the mid-'50s every General Motors These ball vehicle car and truck, whether manual or power bearings steering equipped, came with the patented move the ball Saginaw recirculating ball and nut steering gear. nut assembly This type of steering gear is very low in friction up or down and provides adequate mechanical advantage for the wormshaft the vehicle. Most of these vehicles are still diffi- when the cult to steer because they are large and heavy. A steering wheel Magazine. large diameter steering wheel was used for manu- is turned. al steering but when the power steering was There are two optioned a 14-15 inch steering wheel was used to complete ball bearing circuits within the ball nut. To keep the ball bearings from running out of the reduce input sensitivity. A smaller steering wheel Knuckles Skinned diameter also provided more interior room and a end of either circuit, the ball nut has two tubular comfortable driving position. During the '50s, ball guides which allow the ball bearings to con- '60s, '70s and through the early '80s many other stantly re-circulate, distributing wear evenly vehicle manufacturers adopted the design and it is among them.
    [Show full text]
  • Front Suspension Overview
    FRONT SUSPENSION OVERVIEW Our Initial Concept Suspension in solar cars is not designed to provide a smooth ride. Soft suspensions waste energy by absorbing the motion of the car as it travels over a bump. Therefore, solar cars have a very stiff suspension, which is designed to prevent damage to the frame in the event of a large jolt. For the front wheels almost all solar cars use double A-arm suspension, shown below. The double A-arm system has normally completely independent suspension in the front or rear and are commonly used in sports and racing cars. It is a more compact system that lowers the vehicle hood resulting in grater visibility and better aerodynamics. In our design we are using a Short-Long Double A-arm suspension. The upper arm is shorter to induce negative camber as the suspension rises. When the vehicle is in a turn, body roll results in positive camber gain on the outside wheel. The outside wheel also rises and gains negative camber due to the shorter upper arm. The suspension design attempts to balance these two effects to cancel out and keep the tire perpendicular to the ground. This is especially important for the outer tire because of the weight transfer to this tire during a turn. The picture below shows the short-long arm set up for the suspension in a normal car. Note the difference between the double A-arm suspension in a normal car when compared to the double A-arm suspension in a solar car. Solar car design uses long uprights mating onto high mounted wishbones reduces the thickness of the wheel fairings which lowers drag.
    [Show full text]
  • Alignment Camber/Caster Tools | Light Truck/SUV Alignment Tools Heavy Duty Truck Alignment Tools | Automotive Alignment Equipment
    423 Alignment Camber/Caster Tools | Light Truck/SUV Alignment Tools Heavy Duty Truck Alignment Tools | Automotive Alignment Equipment WARNING: For more information go to www.P65Warnings.ca.gov. WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION BUYER'S GUIDE SUPPLY CORPORATION 424 ALIGNMENT // ALIGNMENT TOOL ASSORTMENT SETS Passenger Car & Light Truck Assortment Board Sets Alignment Tool Assortment Sets LIGHT TRUCK/SUV SLEEVE PASSENGER CAR ASSORTMENT BOARD SET ASSORTMENT BOARD SET • This great • Board set new board set includes the includes the most most popular popular parts for shims, cam kits aligning today’s and adjustable trucks and SUVs. strut plates • A Don’t be caught “must have” without the part for any shop that you need performing • Shipped with 4 wheel the polymer alignments on display board passenger cars • Shipped with high-strength polymer display board 251-88270 251-88260 ASCOT NO. MFG. NO. DESCRIPTION ASCOT NO. MFG. NO. DESCRIPTION 251-88270 88270 Light Truck/SUV Sleeve Assortment Board 251-88260 88260 Passenger Car Assortment Board Set BOARD INCLUDES ONE EACH OF THE FOLLOWING: BOARD INCLUDES ONE EACH OF THE FOLLOWING: 26012 JEEP CAMBER SHIMS: 2 each of +.5° and +1.0° 66050, CHRYSLER/DODGE BUSHING & BUSHING PRESS to correct camber on WJ, KJ & JK 66025 ADAPTERS: Everything you need to adjust rear camber on the popular Chrysler X platform. 2 sets included 26014 JEEP CAMBER SHIMS: 2 each of +.5° and +1.0° ALIGNMENT // ALIGNMENT TOOL ASSORTMENT ASSORTMENT ALIGNMENT // TOOL to correct camber on WJ, KJ & JK 66037 CHRYSLER LX CAMBER/CASTER CAM: Adjusts front alignment angles.
    [Show full text]