DOCSLIB.ORG

Vector 100 Pro Laser Range Finder Easy to Operate

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Vector 100 Pro Laser Range Finder Easy to Operate SOLA-Messwerkzeuge GmbH Unteres Tobel 25 TECHNICAL DATA ORDERING INFORMATION EASY TO OPERATE A-6840 Götzis Tel: +43 (0)5523 53380-0 Fax: +43 (0)5523 53385 VECTOR 100 PRO Includes Rotating display Mini tripod MST Your most frequently used measuring functions are ready [email protected] www.sola.at Measurement range 0.2 – 100 m* Laser-Range Finder to use at the touch of a button. The display offers fast and Accuracy ± 1.5 mm** VECTOR 100 PRO intuitive navigation through the other function levels and Ing. Guido Scheyer Measurement unit m, in, ft, ft+in 3 x 1.2 V Ni-Mh battery settings. SOLA-Meßwerkzeuge GmbH & Co. 1 Belt pouch Wannental 50 Laser class 2 1 Operating manual CD D-88131 Lindau Laser type 635 nm, < 1 mW Tel: +49 (0)8382 28585 1 Quick Start VECTOR 100 PRO Protection type IP 65 Fax: +49 (0)8382 977002 1 Charging/data cable 4-lines display + Touch-screen for quick Automatic shut-off of 30 s [email protected] backlight and easy operation www.sola.de laser VECTOR 100 PRO item no. 71023101 Automatic shut-off of 180 s SOLA Suisse AG device Grenzstrasse 24 Battery life up to 5000 measurements*** CH-9430 St. Margrethen Battery type 3 x 1.2 V Ni-Mh battery Tel: +41 (0)71740 1616 Fax: +41 (0)71740 1818 Operating temperature 0 – 40 °C [email protected] Storage temperature -10 – 60 °C ACCESSORIES www.solasuisse.ch Dimensions 115 x 50 x 25 mm VECTOR 100 PRO For a steady hold, the VECTOR Weight, 120 g 100 PRO can be fixed to the FST including batteries LASER RANGE FINDER tripod using 1/4” screw thread. The fixed position enables a wide Get the SOLA VECTOR Measure & Sketch app Convenient to carry thanks IP65 protection USEFUL. PRACTICAL. ACCURATE. range of measurements to be Create sketches, dimension photos and export the results of to belt pouch repeated with pinpoint precision your work – the free VECTOR Measure & Sketch app makes and accuracy. recording and documentation measured values fast and easy. Thanks to the self-explanatory menu navigation using the app is child’s play. 035145 Compact tripod FST item no. 71121701 Changes, Typing and printing errors reserved. and printing errors Changes, Typing | Inclination apter NK1 item no. 71128501 002719 * Depending on the ambient conditions in the workplace. Mini tripod MST item no. 71121901 WE DEVELOP TOGETHER 9 ** This degree of precision applies when measuring distances of between 0.2 and WITH PROFESSIONALS. 10 m. When measuring distances of between 10 m and 100 m, the maximum Further information regarding the accessories EN 99040644 tolerance may deteriorate by 0.1 mm/m. FOR PROFESSIONALS. *** When operated at room temperature. can be found at www.sola.at bluetooth camera VECTOR 100 PRO CAMERA FUNCTION VECTOR Min. / max. measurement Indirect measuring via Automatic distance SPECIALLY DEVELOPED WITH FOR SIMPLIFIED TARGET APPLICATIONS IN DETAIL You can fi nd out both minimum angle measurement camera and maximum distances by Calculate an indirect, Automatic distance BLUETOOTH AND CAMERA FUNCTION POINT ORIENTATION measuring the shortest distance inaccessible height with two measurement can be used to between 2 points or the longest simple length measurements. measure inaccessible distances. The VECTOR 100 PRO with the latest technology has Over greater distances or in poor Length measurement distance, such as a diagonal. Thanks to the automatic Length measurement is used everything covered, integrated Bluetooth and camera function, light conditions, it is often difficult With the VECTOR 100 PRO, electronic inclination to aim at a point at a height user-friendly touch-screen and a built-in inclination sensor. to accurately locate the measuring you can measure distances sensor, no further 90° angle – the inclination sensor then point but even these measurements from two reference edges, front Continuous measurement measurement is necessary. automatically calculates the We have now enhanced our laser distance meter range are easy to carry out thanks to the and back. There is also the third The continuous measurement Height measurement can relevant height and distance. with the addition of the VECTOR 100 PRO – the result is an camera function. The 2 and 4 x option of attaching the device to feature enables you to therefore be achieved attractive professional tool for measuring distances of up to zoom camera allows users to aim a tripod. determine your desired target without needing to reach the 100 m at an accuracy of 1.5 mm/m. accurately at specific target points distances quickly. measuring points. Addition / subtraction using the display. Users can easily The other useful functions of the VECTOR 100 PRO include measure distances of up to 100 m addition and subtraction. This enables you to calculate your at the push of a button. Surface measurement Indirect 3-point measurement measurement values as you go. VECTOR 100 PRO Thanks to the automatic Using 3 length measurements, Indirect distance Length measurement calculation function, you can measure a distance measurement Surface measurement determining surface areas along a line that you cannot The VECTOR 100 PRO is ideal Measurement value memory Volume measurement BLUETOOTH with the VECTOR 100 PRO access with pinpoint accuracy. for calculating indirect distance The VECTOR 100 PRO enables you to call up your last 100 Min. / max. measurement DIGITAL DATA TRANSFER could not be simpler. You measure the shortest and measurements without measurement results at any time from its integrated memory. bluetooth longest distance and the distance reaching the attachment Continuous measurement at a 90° angle. points. From one position, Indirect 3-point measurement You can transfer the measured data two length measurements Inclination sensor Indirect 2-point measurement quickly and efficiently via Bluetooth Volume measurement are made to the respective The VECTOR 100 PRO has an automatic electronic angle- Indirect measuring via angle directly to your smartphone. In The VECTOR 100 PRO is Indirect 2-point measuring points. The indirect measurement function. This inclination sensor allows indirect Indirect distance measurement addition, there is a data cable for ideal for determining the measurement distance between these distances, heights and sections to be measured without Automatic distance measurement transfers, which can also be used volume of a room. With the Measure an indirect, measuring points is displayed hassle and with extreme ease. in an instant. Addition / subtraction to charge the device. This allows range finder from SOLA, you inaccessible line with just a measurement results to be digitally can calculate the volume in a press of a button by taking 2 Measurement value memory transferred from the VECTOR 100 matter of seconds. distance measurements. Inclination sensor PRO to other devices..
Load more

Recommended publications
  • Check Points for Measuring Instruments
    Catalog No. E12024 Check Points for Measuring Instruments Introduction Measurement… the word can mean many things. In the case of length measurement there are many kinds of measuring instrument and corresponding measuring methods. For efficient and accurate measurement, the proper usage of measuring tools and instruments is vital. Additionally, to ensure the long working life of those instruments, care in use and regular maintenance is important. We have put together this booklet to help anyone get the best use from a Mitutoyo measuring instrument for many years, and sincerely hope it will help you. CONVENTIONS USED IN THIS BOOKLET The following symbols are used in this booklet to help the user obtain reliable measurement data through correct instrument operation. correct incorrect CONTENTS Products Used for Maintenance of Measuring Instruments 1 Micrometers Digimatic Outside Micrometers (Coolant Proof Micrometers) 2 Outside Micrometers 3 Holtest Digimatic Holtest (Three-point Bore Micrometers) 4 Holtest (Two-point/Three-point Bore Micrometers) 5 Bore Gages Bore Gages 6 Bore Gages (Small Holes) 7 Calipers ABSOLUTE Coolant Proof Calipers 8 ABSOLUTE Digimatic Calipers 9 Dial Calipers 10 Vernier Calipers 11 ABSOLUTE Inside Calipers 12 Offset Centerline Calipers 13 Height Gages Digimatic Height Gages 14 ABSOLUTE Digimatic Height Gages 15 Vernier Height Gages 16 Dial Height Gages 17 Indicators Digimatic Indicators 18 Dial Indicators 19 Dial Test Indicators (Lever-operated Dial Indicators) 20 Thickness Gages 21 Gauge Blocks Rectangular Gauge Blocks 22 Products Used for Maintenance of Measuring Instruments Mitutoyo products Micrometer oil Maintenance kit for gauge blocks Lubrication and rust-prevention oil Maintenance kit for gauge Order No.207000 blocks includes all the necessary maintenance tools for removing burrs and contamination, and for applying anti-corrosion treatment after use, etc.
    [Show full text]
  • Intro to Measurement Uncertainty 2011
    Measurement Uncertainty and Significant Figures There is no such thing as a perfect measurement. Even doing something as simple as measuring the length of a pencil with a ruler is subject to limitations that can affect how close your measurement is to its true value. For example, you need to consider the clarity and accuracy of the scale on the ruler. What is the smallest subdivision of the ruler scale? How thick are the black lines that indicate centimeters and millimeters? Such ideas are important in understanding the limitations of use of a ruler, just as with any measuring device. The degree to which a measured quantity compares to the true value of the measurement describes the accuracy of the measurement. Most measuring instruments you will use in physics lab are quite accurate when used properly. However, even when an instrument is used properly, it is quite normal for different people to get slightly different values when measuring the same quantity. When using a ruler, perception of when an object is best lined up against the ruler scale may vary from person to person. Sometimes a measurement must be taken under less than ideal conditions, such as at an awkward angle or against a rough surface. As a result, if the measurement is repeated by different people (or even by the same person) the measured value can vary slightly. The degree to which repeated measurements of the same quantity differ describes the precision of the measurement. Because of limitations both in the accuracy and precision of measurements, you can never expect to be able to make an exact measurement.
    [Show full text]
  • The Gage Block Handbook
    AlllQM bSflim PUBUCATIONS NIST Monograph 180 The Gage Block Handbook Ted Doiron and John S. Beers United States Department of Commerce Technology Administration NET National Institute of Standards and Technology The National Institute of Standards and Technology was established in 1988 by Congress to "assist industry in the development of technology . needed to improve product quality, to modernize manufacturing processes, to ensure product reliability . and to facilitate rapid commercialization ... of products based on new scientific discoveries." NIST, originally founded as the National Bureau of Standards in 1901, works to strengthen U.S. industry's competitiveness; advance science and engineering; and improve public health, safety, and the environment. One of the agency's basic functions is to develop, maintain, and retain custody of the national standards of measurement, and provide the means and methods for comparing standards used in science, engineering, manufacturing, commerce, industry, and education with the standards adopted or recognized by the Federal Government. As an agency of the U.S. Commerce Department's Technology Administration, NIST conducts basic and applied research in the physical sciences and engineering, and develops measurement techniques, test methods, standards, and related services. The Institute does generic and precompetitive work on new and advanced technologies. NIST's research facilities are located at Gaithersburg, MD 20899, and at Boulder, CO 80303. Major technical operating units and their principal
    [Show full text]
  • Surftest SJ-400
    Form Measurement Surftest SJ-400 Bulletin No. 2013 Aurora, Illinois (Corporate Headquarters) (630) 978-5385 Westford, Massachusetts (978) 692-8765 Portable Surface Roughness Tester Huntersville, North Carolina (704) 875-8332 Mason, Ohio (513) 754-0709 Plymouth, Michigan (734) 459-2810 City of Industry, California (626) 961-9661 Kirkland, Washington (408) 396-4428 Surftest SJ-400 Series Revolutionary New Portable Surface Roughness Testers Make Their Debut Long-awaited performance and functionality are here: compact design, skidless and high-accuracy roughness measurements, multi-functionality and ease of operation. Requirement Requirement High-accuracy1 measurements with 3 Cylinder surface roughness measurements with a hand-held tester a hand-held tester A wide range, high-resolution detector and an ultra-straight drive The skidless measurement and R-surface compensation functions unit provide class-leading accuracy. make it possible to evaluate cylinder surface roughness. Detector Measuring range: 800µm Resolution: 0.000125µm (on 8µm range) Drive unit Straightness/traverse length SJ-401: 0.3µm/.98"(25mm) SJ-402: 0.5µm/1.96"(50mm) SJ-401 SJ-402 SJ-401 Requirement Requirement Roughness parameters2 that conform to international standards The SJ-400 Series can evaluate 36 kinds of roughness parameters conforming to the latest ISO, DIN, and ANSI standards, as well as to JIS standards (1994/1982). 4 Measurement/evaluation of stepped features and straightness Ultra-fine steps, straightness and waviness are easily measured by switching to skidless measurement mode. The ruler function enables simpler surface feature evaluation on the LCD monitor. 2 3 Requirement Measurement Applications R-surface 5 measurement Advanced data processing with extended analysis The SJ-400 Series allows data processing identical to that in the high-end class.
    [Show full text]
  • Length Scale Measurement Procedures at the National Bureau of 1 Standards
    NEW NIST PUBLICATION June 12, 1989 NBSIR 87-3625 Length Scale Measurement Procedures at the National Bureau of 1 Standards John S. Beers, Guest Worker U.S. DEPARTMENT OF COMMERCE National Bureau of Standards National Engineering Laboratory Precision Engineering Division Gaithersburg, MD 20899 September 1987 U.S. DEPARTMENT OF COMMERCE NBSIR 87-3625 LENGTH SCALE MEASUREMENT PROCEDURES AT THE NATIONAL BUREAU OF STANDARDS John S. Beers, Guest Worker U.S. DEPARTMENT OF COMMERCE National Bureau of Standards National Engineering Laboratory Precision Engineering Division Gaithersburg, MD 20899 September 1987 U.S. DEPARTMENT OF COMMERCE, Clarence J. Brown, Acting Secretary NATIONAL BUREAU OF STANDARDS, Ernest Ambler, Director LENGTH SCALE MEASUREMENT PROCEDURES AT NBS CONTENTS Page No Introduction 1 1.1 Purpose 1 1.2 Line scales of length 1 1.3 Line scale calibration and measurement assurance at NBS 2 The NBS Line Scale Interferometer 2 2.1 Evolution of the instrument 2 2.2 Original design and operation 3 2.3 Present form and operation 8 2.3.1 Microscope system electronics 8 2.3.2 Interferometer 9 2.3.3 Computer control and automation 11 2.4 Environmental measurements 11 2.4.1 Temperature measurement and control 13 2.4.2 Atmospheric pressure measurement 15 2.4.3 Water vapor measurement and control 15 2.5 Length computations 15 2.5.1 Fringe multiplier 16 2.5.2 Analysis of redundant measurements 17 3. Measurement procedure 18 Planning and preparation 18 Evaluation of the scale 18 Calibration plan 19 Comparator preparation 20 Scale preparation,
    [Show full text]
  • Quick Guide to Precision Measuring Instruments
    E4329 Quick Guide to Precision Measuring Instruments Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring Sensor Systems Test Equipment and Seismometers Digital Scale and DRO Systems Small Tool Instruments and Data Management Quick Guide to Precision Measuring Instruments Quick Guide to Precision Measuring Instruments 2 CONTENTS Meaning of Symbols 4 Conformance to CE Marking 5 Micrometers 6 Micrometer Heads 10 Internal Micrometers 14 Calipers 16 Height Gages 18 Dial Indicators/Dial Test Indicators 20 Gauge Blocks 24 Laser Scan Micrometers and Laser Indicators 26 Linear Gages 28 Linear Scales 30 Profile Projectors 32 Microscopes 34 Vision Measuring Machines 36 Surftest (Surface Roughness Testers) 38 Contracer (Contour Measuring Instruments) 40 Roundtest (Roundness Measuring Instruments) 42 Hardness Testing Machines 44 Vibration Measuring Instruments 46 Seismic Observation Equipment 48 Coordinate Measuring Machines 50 3 Quick Guide to Precision Measuring Instruments Quick Guide to Precision Measuring Instruments Meaning of Symbols ABSOLUTE Linear Encoder Mitutoyo's technology has realized the absolute position method (absolute method). With this method, you do not have to reset the system to zero after turning it off and then turning it on. The position information recorded on the scale is read every time. The following three types of absolute encoders are available: electrostatic capacitance model, electromagnetic induction model and model combining the electrostatic capacitance and optical methods. These encoders are widely used in a variety of measuring instruments as the length measuring system that can generate highly reliable measurement data. Advantages: 1. No count error occurs even if you move the slider or spindle extremely rapidly. 2. You do not have to reset the system to zero when turning on the system after turning it off*1.
    [Show full text]
  • Part Ii: Procedures and Equipment for Weighing, Measuring and Recording Anthropometric Data
    PART II: PROCEDURES AND EQUIPMENT FOR WEIGHING, MEASURING AND RECORDING ANTHROPOMETRIC DATA In order to accurately reflect health status, measurements must be taken carefully using standardized techniques. The results must be recorded accurately and compared with the appropriate references. Measurements do not need to be done twice, if the one measurement is done correctly, using proper equipment and technique. If there is any doubt about the accuracy of a measurement, it should be repeated. Measuring Recumbent Length of Infants and Young Children Until age 2, children must be measured in the recumbent position. Between 2 and 3 years of age the CPA (or individual measuring the child) must decide whether a recumbent or standing measurement is most appropriate. If the child is <32”, a recumbent measurement must be used, because the charts based on standing height apply only to heights > 32”. For children 2 to 3 years of age, taller than 32”, the best guideline is to think about the physical abilities of the child. Generally, if a child can stand unassisted and follow directions for proper positioning, a standing measure should be taken. If the child cannot stand straight, a recumbent length should be measured. birth to 24 months………measure recumbent length . between 2 and 3 years of age: o if < 32”……………….measure recumbent length o if ≥ 32” if child can stand unassisted in proper position, measure standing if child cannot stand properly, measure recumbent length . over 3 years of age……………..measure standing height A. Equipment: Use a recumbent measuring board with a fixed headpiece and sliding foot piece that are both perpendicular/upright (form a 90-degree angle) to the measurement surface.
    [Show full text]
  • I Introduction to Measurement and Data Analysis
    I Introduction to Measurement and Data Analysis Introduction to Measurement In physics lab the activity in which you will most frequently be engaged is measuring things. Using a wide variety of measuring instruments you will measure times, temperatures, masses, forces, speeds, frequencies, energies, and many more physical quantities. Your tools will span a range of technologies from the simple (such as a ruler) to the complex (perhaps a digital computer). Certainly it would be worthwhile to devote a little time and thought to some of the details of \measuring things" that may have not yet occurred to you. True Value - How Tall? At first thought you might suppose that the goal of measurement is a very straightforward one: find the true value of the thing being measured. Alas, things are seldom as simple as we would like. Consider the following \case study." Suppose you wished to measure how your lab partner's height. One way might be to simply look at him or her and estimate, \Oh, about five-nine," meaning five feet, nine inches tall. Of course you couldn't be sure that five-eight or five-ten, or even five-eleven might be a better estimate. In other words, your measurement (estimate) is uncertain by some amount, perhaps an inch or two either way. The \true value" lies somewhere within a range of uncertainty and one way to express this notion is to say that your partner's height is five feet, nine inches plus or minus two inches or 69 ± 2 inches. It should begin to be clear that at least one of the goals of measurement is to reduce the uncertainty to as small an amount as is feasible and useful.
    [Show full text]
  • Comparison of Internal and External Threads Pitch Diameter Measurement by Using Conventional Methods and CMM’S
    19th International Congress of Metrology, 09001 (2019) https://doi.org/10.1051/metrology/201909001 Comparison of internal and external threads pitch diameter measurement by using conventional methods and CMM’s İ. Ahmet Yüksel1*, T. Oytun Kılınç1, K. Berk Sönmez1, and Sinem Ön Aktan1 1Department of Laboratories and Calibration Management, Roketsan Missiles Industries Inc., 06780 Ankara, Turkey Abstract. Threads are very frequent and critical connection methods of components to build final products as per desired technical requirements. As it is used for very wide numbers of applications and industries, tolerances and thread structure differ as per requirements of applied areas. After theoretical decision of threaded parts, one hard task is to manufacture this thread as required. Correct flank angle, pitch diameter, pitch, height, major/minor diameters shall be obtained to receive desired mechanical connection properties. So as a result of all importance of threaded connection, it is also important to control thread properties. In this study it is aimed to show that as a result of significant development on sensor and probing technology, Coordinate Measuring Machines (CMMs) are good alternatives of conventional methods by considering accuracy, time requirement, setup requirements, and ease of application. In order to evaluate competence of regular bridge type CMMs regarding simple pitch diameter measurement, results of pitch diameter from symmetric thread with 30º flank angles will be taken by 1D length measurement device and bridge type CMM to compare. Comparison of conventional methods and CMM’s result shows that CMMs also provide accurate and precise results and can be used for calibration of gages as an alternative method with a number of advantages which are shown by this study.
    [Show full text]
  • Dimensional Metrology and Positioning Operations: Basics for a Spatial Layout Analysis of Measurement Systems
    Dimensional metrology and positioning operations: basics for a spatial layout analysis of measurement systems A. Lestrade Synchrotron SOLEIL, Saint-Aubin, France Abstract Dimensional metrology and positioning operations are used in many fields of particle accelerator projects. This lecture gives the basic tools to designers in the field of measure by analysing the spatial layout of measurement systems since it is central to dimensional metrology as well as positioning operations. In a second part, a case study dedicated to a synchrotron storage ring is proposed from the detection of the magnetic centre of quadrupoles to the orbit definition of the ring. 1 Introduction The traditional approach in Dimensional Metrology (DM) consists in considering the sensors and their application fields as the central point. We propose to study the geometrical structure or ‗architecture‘ of any measurement system, random errors being a consequence of the methodology. Dimensional metrology includes the techniques and instrumentation to measure both the dimension of an object and the relative position of several objects to each other. The latter is usually called positioning or alignment. Dimensional metrology tools are split into two main categories: the sensors that deliver a measure of physical dimensions and the mechanical tools that deliver positions (centring system). A third component has to be taken into account: time dependence of the measures coming from sensors but also from mechanical units. It is usual to consider measurement systems (whatever the techniques or the methods) as evolving in a pure 3D space. But, if ultimate precisions have to be reached, the system cannot be studied from a steady state point of view: any structure is subject to tiny shape modification, stress or displacement (e.g., thermal dependence).
    [Show full text]
  • QP158 Thread Inspection Procedure Owner: Quality Manager Change History: See DCN for Details Rev Date DCN Number Current Revision E 2018‐0201 DCN15947
    Quality Procedure QP158 Thread Inspection Procedure Owner: Quality Manager Change History: See DCN for Details Rev Date DCN Number Current Revision E 2018‐0201 DCN15947 1. PURPOSE 1.1. This procedure defines the control method for thread inspection to ensure that product meets design requirements. 2. SCOPE 2.1. This procedure applies to manufactured and procured components and tooling with internal or external threads. 3. DEFINITIONS 3.1. Thread ‐ A helical structure used to convert between rotational and linear movement or force. A screw thread is a ridge wrapped as a helix around either a cylinder (a straight thread) or a cone (a tapered thread). Threads can be used as a simple machine or as a fastener. Threads can be left or right‐handed and internal or external. Thread form is the cross‐sectional form of a thread. Inch threads are typically documented by stating the diameter of the thread followed by the threads per inch, such as 3/8‐18 which is a 3/8 inch diameter thread with 18 threads per inch, or by thread angle, which is the angle between the threads. This angle determines the style or type of thread (i.e. NPT, pipe thread). Metric threads are defined by their pitch. Example: M16 x 1.25 x 30 has a pitch of 1.25 and a 16mm major diameter and a length of 30mm. 3.2. Lead Angle ‐ On the straight thread, it is the angle made by the helix of the thread at the pitch line with a plane perpendicular to the axis. Lead angle is measured in an axial plane.
    [Show full text]
  • Operating/Safety Instructions Consignes De Fonctionnement/Sécurité Instrucciones De Funcionamiento Y Seguridad
    IMPORTANT: IMPORTANT : IMPORTANTE: Read Before Using Lire avant usage Leer antes de usar Operating/Safety Instructions Consignes de fonctionnement/sécurité Instrucciones de funcionamiento y seguridad GLR500 GLR825 Call Toll Free for Pour obtenir des informations Llame gratis para Consumer Information et les adresses de nos centres obtener información & Service Locations de service après-vente, para el consumidor y appelez ce numéro gratuit ubicaciones de servicio 1-877-BOSCH99 (1-877-267-2499) www.boschtools.com For English Version Version française Versión en español See page 6 Voir page 18 Ver la página 29 h i g f a e d b c 9 8 7 6 5 4 3 2 1 10 11 12 13 14 15 22 18 17 16 23 IEC 60825-1:2007-03 ≤ 1mW @ 635 nm 2 Laser Radiation. Do not stare into the beam. Class 2 Laser product. 19 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50,6/24/2007 Radiación láser. No mire al rayo. 21 Producto láser de Clase 2. Cumple con las normas 21 CFR 1040.10y 1040.11, excepto por las desviaciones conforme al Aviso para láseres 50 del juio de 2007 20 Rayonnement laser. Ne regardez pas directement dans le faisceau. Produit laser de Classe 2. Conforme à 21 CFR 1040.10 et 1040.11, sauf pour les écarts suivant l’ Avis laser 50, 24/6/2007 24 29 28 27 10 26 24 25 -2- A B 1.6 ft 1.6 ft C D t 1.6 f t 1.6 f E F min 1.6 ft -3- max 2 G H 1 2 E 1 90˚ 3 1 2 I 2 3 J 1 E 3 3 E 2 1 90˚ 1 90˚ 2 2 3 K 1 L E B1 A 3 B3 2 90˚ 90˚ 1 B2 -4- M 2.0 ft 2.0 ft N O 30 31 DLA001 DLA002 -5- General Safety Rules ! IEC 60825-1:2007-03 WARNING LASER RADIATION.
    [Show full text]