Model NA-11S1 Owner’s Manual

Network Audio Player n SAFETY PRECAUTIONS IMPORTANT SAFETY • DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this INSTRUCTIONS declaration relates, is in conformity with the following standards: CAUTION 1. Read these instructions. EN60065, EN55013, EN55020, EN61000-3-2, EN61000-3-3, EN300328, EN301489-01, EN301489-17 and EN50371. RISK OF ELECTRIC SHOCK 2. Keep these instructions. Following the provisions of Low Voltage Directive 2006/95/EC and EMC 3. Heed all warnings. DO NOT OPEN Directive 2004/108/EC, the EC regulation 1275/2008 and its frame work 4. Follow all instructions. Directive 2009/125/EC for Energy-related Products (ErP). CAUTION: 5. Do not use this apparatus near water. 6. Clean only with dry cloth. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE Marantz Europe 7. Do not block any ventilation openings. COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. A division of D&M Europe B.V. Install in accordance with the manufacturer’s instructions. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Beemdstraat 11, 5653 MA Eindhoven, 8. Do not install near any heat sources such as radiators, heat registers, The Netherlands The lightning flash with arrowhead symbol, within an equilateral stoves, or other apparatus (including amplifiers) that produce heat. triangle, is intended to alert the user to the presence of 9. Protect the power cord from being walked on or pinched particularly at uninsulated “dangerous voltage” within the product’s enclosure plugs, convenience receptacles, and the point where they exit from the that may be of sufficient magnitude to constitute a risk of apparatus. A NOTE ABOUT RECYCLING: electric shock to persons. 10. Only use attachments/accessories specified by the manufacturer. This product’s packaging materials are recyclable and can The exclamation point within an equilateral triangle is intended 11. Use only with the cart, stand, tripod, bracket, or table be reused. Please dispose of any materials in accordance to alert the user to the presence of important operating specified by the manufacturer, or sold with the apparatus. with the local recycling regulations. and maintenance (servicing) instructions in the literature When a cart is used, use caution when moving the cart/ When discarding the unit, comply with local rules or accompanying the appliance. apparatus combination to avoid injury from tip-over. regulations. 12. Unplug this apparatus during lightning storms or when Batteries should never be thrown away or incinerated WARNING: unused for long periods of time. but disposed of in accordance with the local regulations TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 13. Refer all servicing to qualified service personnel. concerning battery disposal. EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Servicing is required when the apparatus has been damaged in any way, This product and the supplied accessories, excluding the such as power-supply cord or plug is damaged, liquid has been spilled or batteries, constitute the applicable product according to the objects have fallen into the apparatus, the apparatus has been exposed to WEEE directive. rain or moisture, does not operate normally, or has been dropped. 14. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user.

I n NOTES ON USE n CAUTIONS ON INSTALLATION WARNINGS z • Avoid high temperatures. z z Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do not obstruct the ventilation holes. z • Do not let foreign objects into the unit. • Do not let insecticides, benzene, and thinner come in contact with the unit. Wall • Never disassemble or modify the unit in any way. • Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths or curtains. • Naked flame sources such as lighted candles should not be placed on zz For proper heat dispersal, do not install this unit in a confined the unit. space, such as a bookcase or similar enclosure. • Observe and follow local regulations regarding battery disposal. • Do not expose the unit to dripping or splashing fluids. • More than 0.1 m is recommended. • Do not place objects filled with liquids, such as vases, on the unit. • Do not handle the mains cord with wet hands. • When the switch is in the OFF (STANDBY) position, the equipment is not completely switched off from MAINS. • The equipment shall be installed near the power supply so that the power supply is easily accessible. • Do not keep the battery in a place exposed to direct sunlight or in places with extremely high temperatures, such as near a heater.

II Getting started

Thank you for purchasing this Marantz product. To ensure proper operation, please read these owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Contents

Getting started···································································1 Operation······································································· 20 Accessories········································································1 Accessories Main features·····································································2 Operation··········································································21 Check that the following parts are supplied with the product. Cautions on handling··························································3 Preparation·······································································21 q About the remote control···················································3 Operations possible during playback································21 Getting Started...... 1 w Network audio playback···················································23 CD-ROM (Owner’s manual)...... 1 e Favorite function ·····························································29 Safety Instructions...... 1 r Preparation······································································ 5 iPod playback···································································30 Power cord...... 1 t USB memory device playback·········································32 Remote control unit (RC002NA)...... 1 Connections········································································6 y AirPlay function································································34 R03/AAA batteries...... 2 Analog connections ···························································6 u Remote play function·······················································36 Audio cable...... 1 Digital connections·····························································7 i Web control function························································37 Remote connector cable...... 1 PC connection····································································7 Using as a D/A converter·················································39 Connecting to a home network (LAN)································8 r t Other functions································································40 Connecting other equipment·············································9 Remote control jacks connection·······································9 Connecting the power cord··············································10 Information···································································· 42 Setup·················································································11 Menu map········································································11 Part names and functions················································43 Setting the first setup [Quick Setup]································12 Front panel·······································································43 General Settings [General]···············································12 Rear panel········································································43 u i Setting the network [Network]·········································15 Remote control································································44 Setting the audio [Audio]··················································18 Other information····························································45 iPod··················································································45 USB memory device························································45 Network audio··································································46 Explanation terms····························································48 Troubleshooting·······························································50 Resetting the microprocessor··········································54 Specifications···································································54

1 Main features

Playback of DSD file High-grade machined analog audio output DLNA ver. 1.5 support for audio networks This unit can play the DSD file via USB Type B. connectors Supports online music, including Last.fm, Spotify Toroidal transformer Can be used as a D/A convertor This unit features a toroidal transformer that produces Digital audio signals input from an external device or less vibration and magnetic leakage flux compared to computer into this unit can be converted and output as Support for High Quality Audio playback conventional power transformers. The materials and analog signals using this unit’s D/A converter. WAV/FLAC/ALAC (Apple Lossless Audio Codec) manufacturing process of the ring-shaped core are strictly controlled to reduce vibration, while the short-ring attached to the perimeter of the transformer reduce magnetic Inverted-phase analog output signal is possible Support for Gapless playback leakage flux. The USA system balanced output of this unit can be inverted Playback with no gap between music files (for to permit a balanced input to a European type amplifier. WAV/FLAC only) Large-capacitance block capacitor Peripheral circuitry off function minimizes audio A large capacitance 4700 μF capacitor carefully selected for iPod auto detect charges your device even after its acoustic characteristics is incorporated into the Audio output signal interference power supply circuit. In order to minimize noise from peripheral circuitry which this unit switches to standby mode could interfere with the analog audio signal, this unit is equipped with a peripheral circuitry off function which turns Audiophile-grade film capacitors and electrolytic off the digital output circuit, the display, and the illumination “Marantz Remote App” compatibility for capacitors lamp. performing basic unit operations with an iPad®, The unit’s features the same audiophile-grade film iPhone or Android smartphone capacitors and electrolytic capacitors specifically used in Filter switching function top-range models. Switching between 2 types of filter characteristics is OLED (Organic Light Emitting Diode) display that possible during playback in the DSD file and PCM file, can display 3 lines Low-noise low-distortion filter circuit and allowing the listener to enjoy different shadings of the highspeed HDAMSA2-type output amplifier with music. the differential input type HDAM Auto Standby mode for energy savings Supports Internet Radio and music streaming Supports AirPlay® (vpage 34) Double-layered chassis

2 Cautions on handling About the remote control • Before turning the power switch on Inserting the batteries NOTE Check once again that all connections are correct and that • Insert the specified batteries in the remote control. there are no problems with the connection cables. q Remove the rear cover w Set two R03/AAA batteries • Replace the batteries with new ones if the set does not • Power is supplied to some of the circuitry even when the of the remote control. in the battery compartment operate even when the remote control is operated close unit is set to the standby mode. When going on vacation or in the indicated direction. to the unit. (The supplied batteries are only for verifying leaving home for long periods of time, be sure to unplug the operation. Replace them with new batteries at an early date.) power cord from the power outlet. • When inserting the batteries, be sure to do so in the proper direction, following the q and w marks in the battery • About condensation compartment. If there is a major difference in temperature between the • To prevent damage or leakage of battery fluid: inside of the unit and its surroundings, condensation may • Do not use a new battery together with an old one. form on parts inside the unit, causing it to fail to operate • Do not use two different types of batteries. properly. • Do not attempt to charge dry batteries. If this happens, let the unit sit for an hour or two with the • Do not short-circuit, disassemble, heat or dispose of power turned off and wait until there is little difference in batteries in flames. temperature before using the unit. • Do not keep the battery in a place exposed to direct sunlight e Put the rear cover back on. • Cautions on using smartphones or in places with extremely high temperatures, such as near Using a smartphone near this unit may result in noise. If that a heater. occurs, move the smartphone away from the unit when it is • If the battery fluid should leak, carefully wipe the fluid off the in use. inside of the battery compartment and insert new batteries. • Remove the batteries from the remote control if it will not be • Moving the unit in use for long periods. Turn off the power and unplug the power cord from the • Used batteries should be disposed of in accordance with the power outlet. Next, disconnect the cables connected to local regulations regarding battery disposal. other system units before moving the unit. • The remote control may function improperly if rechargeable batteries are used.

3 About the remote control Operating range of the remote control Marantz Remote App Point the remote control at the remote sensor when operating Marantz Remote App is a unique application developed for the it. iPhone, iPod touch and Android smartphone. This application enables you to control Marantz network devices that are connected to your home network. Install the App onto your iPhone, iPod touch or Android smartphone to control this device.

Player Marantz NA-11S1 View Approx. 8 m

30° 30°

Internet Radio

NOTE Favorites Internet Radio Music Server USB • The set may function improperly or the remote control may not operate if the remote control sensor is exposed to direct sunlight, strong artificial light from an inverter type AMP CD Player Filter iPod Player fluorescent lamp or infrared light. AMP Volume • When using 3D video devices that transmit radio communication signals (such as infrared signals etc) between the various units (such as the monitor, 3D glasses, 3D transmitter unit etc), the remote control may not operate due to interference from those radio communication signals. • Bidirectional communication is performed. If this occurs, adjust the direction and distance of the 3D • The Marantz Remote App can be downloaded for free from communication for each unit, and check that the remote the Apple App Store or Google Play store. control operation is not affected by these signals.

4 Preparation Preparation Here, we explain the connections and basic operation methods for this unit.

F Connections vpage 6 F Setup vpage 11

5 Connections

NOTE • Do not plug in the power cord until all connections have been Analog connections completed. • When making connections, also refer to the operating UNBALANCED instructions of the other components. nnBALANCED Jacks • Be sure to connect the left and right channels properly (left The BALANCED jacks on this unit are equipped with XLR with left, right with right). Amplifier connectors that are widely used on professional equipment. AUDIO Their features are listed below. • Do not bundle power cords together with connection cables. AUDIO Doing so can result in humming or noise. IN • The 3 pin construction enables the musical signal to be • Do not connect the unit to the PHONO input connectors on L R transmitted as a balanced signal, with little effect from the amplifier. external noise. • The detachable locking mechanism minimizes connector Cables used for connections L R play and enhances connection reliability. The XLR connector for professional use is internally wired Audio cable (supplied) in either of the following two systems. This unit employs the USA system. L L L R Audio cable • USA system (w PIN=COLD e PIN=HOT) R R

Remote connector 1 2 COLD cable 3 Audio cable (sold separately) HOT Balanced audio GND cable BALANCED • European system (w PIN=HOT e PIN=COLD) Optical cable BALANCED jacks 1 2 HOT Coaxial digital cable 3 AUDIO BALANCED COLD IN iPod cable L R GND If a product that employs the European system is connected with this unit via a balanced cable, the reproduced signal USB cable L R may be phase-inverted. Cable (sold separately) To correct the inversion, set the “Phase” to “Inverted” at the menu setting (vpage 19). L R LAN cable

Monaural mini-plug cable

6 Digital connections PC connection When connecting, use a commercially available optical digital cable or coaxial digital cable. By connecting a computer to the USB port on the rear panel of this unit using a commercially available USB cable, this unit Digital audio output Digital audio input can be used as a D/A converter (vpage 39 “Using as a D/A converter”). Connect digital devices such as AV receivers and D/A If a device equipped with CD transport or digital audio output is converters with the unit to enjoy digital audio output from the connected to this unit, this unit can be used as a D/A converter unit. (vpage 39 “Using as a D/A converter”). AV receivers / D/A converters CD Transport / digital device

COAXIAL OPTICAL COAXIAL OPTICAL IN IN OUT OUT

Type B or or Plug that fits the shape of the connection device connector

Type A

Computer installed with a media player

NOTE • Operation will not occur correctly if connected to the NOTE NOTE computer before the dedicated driver has been installed. • Digital audio output is stopped during DSD signal playback. • Linear PCM signals with a sampling frequency of 32 kHz, • Use a cable that is 3 m or less to connect to the computer. • The digital audio output can be turned on/off in the “Digital 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or Out” menu (vpage 18). 192 kHz can be input into this device. nnWhen connecting the optical digital output • Do not input signals other than linear PCM signals, such as Dolby digital, DTS, AAC etc. into this device. Doing so may connector with an optical transmission cable cause noise, which may cause damage to the speakers. (sold separately)

Match the shapes then insert firmly.

7 Connecting to a home network (LAN) • This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that Required system from Internet radio. • If you have an Internet provider contract for a line You can also operate this unit from a computer using the nnBroadband Internet connection on which network settings are made manually, Web control function. make the settings at “Network connecting • You can update by downloading the latest firmware from the nnModem (when “DHCP” settings is “Off”)” (vpage 15). Marantz website. A device that connects to the broadband circuit and • With this unit, it is possible to use the DHCP and Auto IP For more information, see “Update” (vpage 12). conducts communications on the Internet. functions to make the network settings automatically. • See “Setting the network [Network]” (vpage 15) for A type that is integrated with a router is also available. • When using this unit with the broadband router’s DHCP more information on network setting. nRouter function enabled, this unit automatically performs the IP n address setting and other settings. When using this unit, we recommend you use a router When using this unit connected to a network Wired LAN equipped with the following functions: with no DHCP function, make the settings for • Built-in DHCP server the IP address, etc., at “Network connecting Computer This function automatically assigns IP addresses on the (when “DHCP” settings is “Off”)” ( page 15). LAN. v Modem • When setting manually, check the setting contents with the • Built-in 100BASE-TX switch network administrator. Internet When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. NOTE nnLAN cable (CAT-5 or greater recommended) • A contract with an ISP is required to connect to the Internet. Router To WAN side • Use only a shielded STP or ScTP LAN cable which is • No additional contract is needed if you already have a available at retailer. broadband connection to the Internet. To LAN port • Some flat type LAN cables are easily affected by noise. • The types of routers that can be used depend on the ISP. To LAN port LAN port/ We recommend using a normal type cable. Contact an ISP or a computer shop for details. Ethernet • Marantz assumes no responsibility whatsoever for any connector communication errors or troubles resulting from customer’s network environment or connected devices. • This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE. • Do not connect an Ethernet connector directly to the LAN port/ Ethernet connector on your computer. • To listen to audio streaming, use a router that supports audio streaming.

For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop.

8 Connecting other equipment Remote control jacks connection If this unit is connected to a Marantz amp, the amp can be controlled via this unit using the RS-232C FLASHER IN Marantz Remote App or web control function (vpage 37). Also, remote control signals Connect an external control device or other This unit can be controlled by connecting a received by the amp can be used to control this unit. device for servicing. (Use a straight cable for control box or other control device to this unit. the connection.) nnConnection Use the supplied remote connection cable Control box or control device to connect the REMOTE CONTROL IN External control device terminal of this unit to REMOTE CONTROL OUT terminal of the amplifier. nnSetting Set the remote control switch on the rear panel of this unit to “EXT.” to use this feature. Set to “EXT.” The unit • This setting will disable remote sensor reception of this unit. • To operate the unit, point the remote control at the remote sensor of the amplifier.

GND To use this unit without connecting it to the Amplifier amplifier, set the remote control switch to “INT.”. Signal

Monaural mini-plug cable

To use the FLASHER IN jack, set the remote control switch to “INT.”.

9 Connecting the power cord When all of the connections are completed, insert the power plug into the power outlet.

To household power outlet (AC 230 V, 50/60 Hz) Power cord (supplied)

NOTE • Insert the plugs securely. Loose connections will result in the generation of noise. • Do not unplug the power cord while the unit is operating. • Do not use a power cord other than the cord supplied with this unit.

10 Setup Menu map

Setting items Detailed items Description Page Menu operation Quick Setup Performs the network settings using a Wizard style window. Press MENU. [Menu] Quick Setup – Quick Setup For details on the operations, see the separate 1 Turns on the Menu settings :enter :back “Getting Started”. mode and the Menu appears on the display (vpage 11 “Menu General Language Sets the language. 12 map”). Sets the unit power to standby when the unit is [Menu] Auto-Standby 12 not in use. General Use ui and ENTER to select Update Updates the firmware. 12 :enter :back 2 menu you want to change. Notification Set the Update and Upgrade notification on/off. 13 Firmware Displays new functions that can be downloaded, • To back to the top of the menu, during menu operation, Add New Feature 14 and upgrades functions. press HOME. Network Network Information Displays various information about the network. – Performs the On/Off settings for the network [Menu] Network Control 17 function when in standby mode. Network 17 :enter :back Friendly Name Edits a name displayed on the Internet. Last.fm Display Disables the display of Last.fm on the menu. 17 Performs the settings for a wired LAN. 15 DHCP (On) or DHCP (Off) Performs the DHCP setting. 15 IP Addressz Performs the IP address setting. 15 Subnet Maskz Performs the subnet mask setting. 15 Settings Gatewayz Performs the gateway setting. 15 Primary DNSz Performs the primary DNS setting. 15 Secondary DNSz Performs the secondary DNS setting. 15 Proxy Performs the proxy setting. 16 Test Connection Performs the wired LAN connection. 15 Audio Noise Shaper Performs the noise shaper setting. 18 DC Filter Performs the DC filter setting. 18 [Menu] Audio Digital Out Performs the digital out setting. 18 :enter :back Phase Performs the phase setting. 19 z Displayed when the “DHCP” setting is “Off” (vpage 15).

11 Setting the first setup General Settings [General] [Quick Setup] Auto-Standby Firmware • For details on “Quick Setup” operations, see the separate When this unit is in the stop state and there is no input signal “Getting Started”. and operation for 30 minutes, it automatically enters the nnUpdate • In order to update the firmware, the environment and • If you cancelled “Quick Setup” menu or changed the standby mode. settings required for connecting to broadband internet are network environment, perform “Menu” – “Quick Setup”. • The default setting is “On”. needed (vpage 8). Press MENU. • Perform the firmware update operation after at least 2 1 Turns on the Menu settings mode minutes has elapsed since turning this unit’s power ON. General Settings [General] and the Menu appears on the display (vpage 11 “Menu Press MENU. map”). 1 Turns on the Menu settings mode Language and the Menu appears on the Use ui and ENTER to select display (vpage 11 “Menu Sets the language for display the menu. map”). • The default setting is “English”. 2 “General” – “Auto-Standby”, then press ENTER or p. Use ui and ENTER to select Press MENU. “Select Auto-Standby” menu 2 appears. “General” – “Firmware” – 1 Turns on the Menu settings mode ENTER and the Menu appears on the “Update”, then press or display (vpage 11 “Menu Use ui to select “On” or “Off”, p. map”). 3 ENTER then press or p. Check for firmware updates. You can also The setting is entered. Check For Update ENTER check approximately how long it will take Use ui and to select to complete an update. 2 “General” – “Language”, then NOTE press ENTER or p. In the following situations, the Auto-Standby function does not Update Start Execute the update process. operate. English / Deutsch / Français / Italiano / • When the source is “iPod” (Direct mode) or “AirPlay”. • If updating fails, the set automatically retries, but if updating is still not possible, one of the messages shown below is Nederlands / Español / Svenska displayed. If the display reads as shown below, check the settings and network environment, then update again.

Display Description Updating fail Updating failed. Login failed Failure to login to server. Server is busy Server is busy. Wait a while then try again. Connection fail Failure in connecting to server. Download fail Downloading of the firmware has failed.

12 General Settings [General] nnUpdate on web screen When the following screen is displayed, click the nnNotification Firmware can be updated using the “Web control function” e (vpage 37). 3 “OK” ( ) button. Update Updating will begin. “Web control function” (vpage 37) settings must Displays a notification message on this unit’s menu screen be completed in advance on a PC belonging to the same when the latest firmware is released with “Update”. network. Firmware Connect to broadband Internet (vpage 8) when using For information on obtaining update files, please contact this function. our customer service center. Warning: Once started,the upload process cannot be interrupted or adorted, in order to ensure the integrity of the Digital Media Player. Are you sure you want to proceed? Press MENU. Click r from step 5 for the “Web control function” OK e 1 Turns on the Menu settings mode 1 (vpage 37). and the Menu appears on the The PC will display the following screen. display (vpage 11 “Menu Wait for approximately 1 minute. map”). You can also gain access by entering the IP address NOTE shown by the unit into a web browser. Do not operate the unit while updating is in progress. Use ui and ENTER to select 2 “General” – “Firmware” – GThe web displayH When the following screen is displayed, updating is “Notification” – “Update”, then FIRMWARE 4 complete. press ENTER or p. “Update Notification” menu Please wait for a minute... Firmware appears.

Use ui to select “On”, then press ENTER or p. New Firmware: xxx.fw 3 Firmware upload status: 100% completed. On Display update message. The upload process finished successfully. Please close this. GThe unit’s screen displayH Off Do not display update message.

• When you press ENTER during display of the notification Button names may vary depending on the OS language used message, the “Check For Update” is displayed. (Refer to When the following screen is displayed by the PC, on your computer. 2 click the “Choose File” (q) button, select the update page 12 for more information on “Update”.) • Press o to erase the notification message. file, and click the “Upload” w( ) button.

Firmware

Choose File Upload new firmware

Upload q w

13 General Settings [General] Upgrade nnAdd New Feature [Notes concerning use of “Update” and “Add New Feature”] Display a notification message on this unit’s menu screen • In order to add new functions, the environment and settings • Do not turn off the power until updating or upgrading is when downloadable firmware is released with “Add New required for connecting to broadband internet are needed completed. Feature”. (vpage 8). • Even with a broadband connection to the Internet, Connect to broadband Internet (vpage 8) when using • Perform the add new feature operation after at least 2 approximately 20 minutes is required for the updating/ this function. minutes has elapsed since turning this unit’s power on. upgrading procedure to be completed. Press MENU. • Once updating/upgrade starts, normal operations on this unit Press MENU. cannot be performed until updating/upgrading is completed. 1 Turns on the Menu settings mode 1 Turns on the Menu settings mode and the Menu appears on the • Furthermore, updating/upgrading the firmware may reset the and the Menu appears on the backup data for the parameters, etc. set for this unit. display (vpage 11 “Menu display (vpage 11 “Menu map”). • If the update or upgrade fails, remove and re-insert the power map”). cord. “Update Retry” appears on the display and update Use ui to select “General” restarts from the point at which update failed. If the error Use ui and ENTER to select continues despite this, check the network environment. 2 “General” – “Firmware” – 2 – “Firmware” – “Add New “Notification” – “Upgrade”, Feature”, then press ENTER or then press ENTER or p. p. • Information regarding the “Update” function and “Add New “Upgrade Notification” menu Feature” will be announced on the Marantz web site each Upgrade Status Display a list of the additional functions appears. provided by the upgrade. time related plans are defined. • When usable new firmware is released with “Update” or Use ui to select “On”, then press ENTER or p. Upgrade Start Execute the upgrade process. “Add New Feature”, a notification message is displayed on 3 the menu screen. When you do not want to be notified, set • If the upgrade is not successful, an error message identical “Update” (vpage 13) and “Upgrade” (vpage 14) to On Display upgrade message. to those in “Update”(vpage 12) will appear on the “Off”. display. Check the settings and network environment, then Off Do not display upgrade message. update again.

Upgrade ID The ID number shown on this screen is needed when carrying out the procedure. • When you press ENTER during display of the notification message, the “Add New Feature” is displayed. (Refer to page 14 for more information on “Add New Feature”.) • Press o to erase the notification message. See the Marantz website for details about updates. When the procedure is complete, “Registered” is displayed and updates can be carried out. If the procedure has not been carried out, “Not Registered” is displayed.

14 Setting the network [Network] • For details on “Quick Setup” operations, see the separate nNetwork connecting “Getting Started”. Use ui and ENTER to select “Network” – n • If you cancelled “Quick Setup” menu or changed the 4 ENTER (when “DHCP” settings is “Off”) network environment, perform “Menu” – “Quick Setup”. “Settings” – “DHCP (On)”, then press or p. “Select DHCP” menu appears. This section explains the settings when connecting this unit to a network that does not have a DHCP function. Connecting wired LAN Use ui to select “On”, then press ENTER or p. 5 “Setup Ethernet” menu appears. Use this procedure to configure the wired LAN settings. To configure the settings manually, check the setting details nnNetwork connecting Use ui to select “Test Connection”, then press with your network administrator. 6 ENTER or p. (when “DHCP”settings are “On”) Perform steps 1 – 4 of the When using this unit with the broadband router’s DHCP “Wait for the network to connect...” is displayed, and function enabled, this unit automatically performs the IP the unit starts connecting to the LAN. 1 “Network connecting (when address setting and other settings. • When the connection is made successfully, “Connected!” “DHCP” settings are “On”)” appears. procedure and select “Off” in Connect the LAN cable • If the connection cannot be established, “Connection step 5. 1 (vpage 8 “Connecting to a Failed” is displayed. Perform steps 1 – 6 again. “Setup Ethernet” menu appears. home network (LAN)” – “Wired LAN”). Use ui to select “IP Address”, 2 then press ENTER or p. Press X (on/standby) to turn on You may need to set the network connection manually, “Enter IP Address” menu appears. depending on the provider you use. To set the connection 2 power to the main unit. manually, use the setting procedure of “Network connecting Use uip or 0 – 9 to input the (when “DHCP” settings are “Off”)”. Press MENU. 3 IP address and press ENTER. 3 Turns on the Menu settings mode and the Menu appears on the Use uip or 0 – 9 to input the address for display (vpage 11 “Menu 4 “Subnet Mask”, “Gateway”, “Primary DNS”, and map”). “Secondary DNS”. Use ui to select “Test Connection”, then press 5 ENTER or p. “Wait for the network to connect...” is displayed, and the unit starts connecting to the LAN. • When the connection is made successfully, “Connected!” appears. • If the connection cannot be established, “Connection Failed” is displayed. Perform steps 1 – 5 again.

15 Setting the network [Network] nnProxy settings Configure these settings to connect to the internet via a Use ui to select “Proxy (Address)” or “Proxy proxy server. 5 (Name)”, then press ENTER or p. “Select Type” menu appears. Press MENU. 1 Turns on the Menu settings mode Use ui to select “Address” or “Name”, then press and the Menu appears on the 6 ENTER or p. display (vpage 11 “Menu “Setup Proxy” menu appears. map”). Use ui to select “Address” or “Name”, then press Use ui and ENTER to select 7 ENTER or p. 2 “Network” – “Settings” – “Enter Proxy Address” or “Enter Proxy Name” menu appears. “Proxy”, then press ENTER or p. Use uip or 0 – 9, +10 to input the address or name, “Setup Proxy” menu appears. 8 then press ENTER. If “Proxy(On)” appears, go to “Setup Proxy” menu appears. 3 step 5. Use ui to select “Port”, then press ENTER or p. If “Proxy(Off)” appears, press 9 “Enter Proxy Port” menu appears. ENTER or p. “Select Proxy” menu appears. Use uip or 0 – 9 to input the port, then press 10 ENTER. Use ui to select “On”, then press ENTER or p. The Proxy settings are completed. 4 “Setup Proxy” menu appears.

16 Setting the network [Network] Other network settings nnFriendly Name nnLast.fm Display The Friendly Name (personalized name) is the name of this Set whether or not to display Last.fm item on the menu. unit displayed on the network (Maximum 63 characters). nnNetwork Control MENU Set the network function On/Off during standby. Press . Press MENU. 1 Turns on the Menu settings mode MENU 1 Turns on the Menu settings mode and the Menu appears on the Press . and the Menu appears on the display (vpage 11 “Menu Turns on the Menu settings mode 1 display (vpage 11 “Menu map”). and the Menu appears on the map”). display (vpage 11 “Menu Use ui to select “Network” – map”). Use ui to select “Network” 2 “Last.fm Display”, then press Use ui to select “Network” – 2 – “Friendly Name”, then press ENTER or p. 2 “Network Control”, then press ENTER or p. “Last.fm Display” appears. “Friendly Name” menu appears. ENTER or p. Use ui to select “Show” or “Hide”, then press “Network Control” menu appears. 3 Use ui to select the friendly name (Marantz 3 ENTER or p. ENTER NA-11S1), then press ENTER. Use ui to select “On”, then press or p. Show Last.fm items will be displayed. 3 Edit a friendly name. Last.fm items will not be displayed. On Network is on during standby. Main unit operable 4 Hide with a network compatible controller. Shortens • For character input, see page 40. the time before the network connection is completed. • When “Network Control” is set to “On”, the nnResetting the friendly name to the default power display lights orange. setting • More power is consumed when in standby (Power consumption: 3 W). In step 3, select “Default” and press ENTER. Off Suspend network function during standby. It will take slightly longer till the network connection is completed. • The minimum amount of power is consumed when in standby (Power consumption: 0.3 W). • This is the default setting.

Press MENU. 4 The display returns to normal.

17 Setting the audio [Audio] This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality. DC Filter Digital Out (Setting for the digital output) • This setting remains effective even if the power is turned off. This filter is effective in preventing excessive speaker vibration Press MENU. Noise Shaper when playing music source where audio with extremely low 1 Turns on the Menu settings mode noise characteristics has been recorded. (The cut frequency is and the Menu appears on the Digital feedback is used to improve the low-sound linearity and set at 1.7 Hz.) display (vpage 11 “Menu the noise characteristics of the audible band. map”). Although no difference is observed in the measured values, Press MENU. the sound quality is changed, allowing users to specify a 1 Turns on the Menu settings mode Use ui to select “Audio” – favorite sound quality. and the Menu appears on the 2 “Digital Out”, then press ENTER display (vpage 11 “Menu map”). or p. Press MENU. “Digital Out” menu appears. 1 Turns on the Menu settings mode Use ui to select “Audio” – “DC and the Menu appears on the Use ui to select “On” or “Off”, then press ENTER display (vpage 11 “Menu 2 Filter”, then press ENTER or p. 3 map”). “DC Filter” menu appears. or p. • When “Digital Out” is set to “Off”, the digital out off Use ui to select “Audio” – Use ui to select “On” or “Off”, then press ENTER indicator lights on the display. 2 “Noise Shaper”, then press 3 or p. ENTER or p. The setting is entered. “Noise Shaper” menu appears. NOTE Use ui to select “On” or “Off”, then press ENTER • The DC Filter function is disabled during playback of a 32 kHz 3 or p. sampling frequency source and DSD. The setting is entered. • The “Noise Shaper”, “DC Filter” and filter characteristics have a last memory function. These settings remain in NOTE memory even if the power is turned off. The Noise Shaper function is disabled during playback of a 32 kHz sampling frequency source and DSD.

18 Setting the audio [Audio] Phase (analog output phase switching) Switches the output signal phase for balanced outputs. The unit’s balanced output conforms to USA system. This setting must be set to “Inverted” in order to execute balanced outputs to a European system amplifier with a different (inverted) phase.

Press MENU. 1 Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).

Use ui to select “Audio” – 2 “Phase”, then press ENTER or p. “Phase” menu appears.

Use ui to select “Normal” or “Inverted”, then 3 press ENTER or p. Normal USA system.

Inverted European system.

19 Operation Operation Here, we explain functions and operations that let you make better use of this unit.

F Preparation vpage 21 F Operations possible during playback vpage 21 F Network audio playback vpage 23 F Favorite function vpage 29 F iPod playback vpage 30 F USB memory device playback vpage 32 F AirPlay function vpage 34 F Remote play function vpage 36 F Web control function vpage 37 F Using as a D/A converter vpage 39 F Other functions vpage 40

20 Operation

This section provides information on playback operation procedures. Operations possible during playback

Preparation Selecting the input source nnSelecting the input source using the remote control Turning the power on nnSelecting the input source using the main unit Press the input source select button Press X (on/standby). Press INPUT. (INTERNET RADIO, MUSIC SERVER, Power is turned on and the STANDBY ONLINE MUSIC USB DIGITAL IN indicator goes off. 1 The display changes to the input source selection , , ). screen. • The desired input source can be selected directly. • You can also switch the power to Press ui to select the input source. • The input source is switched as follows standby by pressing ON/STANDBY X 2 The input source is switched each time the button is each time DIGITAL IN is pressed. on the main unit. pressed. PC Coaxial

Favorites Call Internet Radio Music Server Last.fm Spotify Optical • When you turn on the power of this unit for the first time after purchasing it, the “Quick Setup” menu starts up. • The input source is switched as follows each time ONLINE For details on “Quick Setup” operations, see the separate MUSIC is pressed. “Getting Started”. Menu Optical Coaxial PC USB • If you cancelled “Quick Setup” menu or changed the network Spotify Last.fm environment, perform “Menu” – “Quick Setup”. Turning the power to standby mode With this unit, you can play back music files stored on your iPhone/iPod touch and music from iTunes (vpage 34 Press X (on/standby). “AirPlay function”). The unit enters standby mode. • STANDBY indicator Normal standby : Red “Network Control” – “On” : Orange iPod charge standby : Orange

NOTE Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time, unplug the power cord from the power outlet. nnCompletely turning off the power Unplug the power cord from the wall outlet.

21 Operations possible during playback Setting the sleep timer Switching the display’s brightness Switching the filter characteristics

Use this function to automatically switch the power to the Press DIMMER. 2 filter characteristic types can be selected for DSD source, standby mode after a specific amount of time (minutes). and for PCM source. The 2 filter characteristics types are explained below. Press SLEEP during playback and Filter select the setting time. PCM source DSD source • The sleep timer can be set to up to 90 Type minutes, in steps of 10 minutes. • The display brightness is adjusted each time DIMMER is Offers a short impulse This is a direct mode • After about 3 seconds, the setting is pressed as shown below. response for both pre- in which there is no entered and the display returns to as echo and post-echo. filtering versus the DSD 100% 70% it was before. Suitable for large- data (Super Audio CD Filter 1 information-content recording signal). The Off 40% audio. Produces a original source data is nnCanceling the sleep timer deep sound image reproduced as it is, along Either press SLEEP to select “Sleep 1 OFF” or press X • When the display brightness is set to “Off”, the DISPLAY with clearly-defined with the original texture (on/standby). OFF indicator lights on the display. positional relationships and space. nnTo check the time remaining until the sleep of the audio sources. This filter offers DSD data exceeding 100 timer is activated asymmetrical impulse kHz is attenuated. Also Press SLEEP. If you operate the buttons when the display brightness is set response. The post- equipped with DACs to “Off”, the display temporarily lights at “100%” brightness echo is slightly longer for normal-phase and level. Filter 2 than the pre-echo. inverted-phase signals (23 Switching the illumination lamp setting Resembles analog each). The asymmetrical sound quality. DAC operation gives The illumination lamps on the both sides of the unit main panel Listening with headphones priority to the resolution, can be turned on or off. resulting in a smoother • The default setting is “On”. Plug the headphones (sold separately) into the headphone sound. jack (PHONES). Press and hold DIMMER for 2 seconds or longer. Press FILTER. Adjusting the Volume • The setting cycles through the 2 modes Turn LEVEL on the main unit. (Filter 1/Filter 2) as shown below each time the button is pressed. NOTE • The on/off setting changes as follows with each press of To prevent hearing loss, do not raise the volume level the button. excessively when using headphones. Filter 1 Filter 2 On Off

• This can also be set by pressing DIMMER on the main unit. NOTE The “Noise Shaper”, “DC Filter” and filter characteristics have a last memory function. These settings remain in memory even if the power is turned off.

22 Network audio playback Follow this procedure to play Internet radio stations or music files stored on a computer. nnSearching stations by keyword • There are many Internet radio stations on the Internet, and (Alphabetic strings) nnAbout the Internet Radio function (vpage 46) the quality of the programs they broadcast as well as the bit nnAbout Music server (vpage 46) rate of the tracks varies widely. Press ui to select “Search by Generally, the higher the bit rate, the higher the sound 1 ENTER nnAbout Last.fm (vpage 47) Keyword”, then press or quality, but depending on the communication lines and p. nnAbout Spotify (vpage 47) server traffic, the music or audio signals being streamed may be interrupted. Inversely, lower bit rates mean a lower sound Use ui p or 0 – 9, +10 to Listening to Internet Radio quality but less tendency for the sound to be interrupted. 2 • “Server Full” or “Connection Down” is displayed if the input the characters, then press Prepare for playback. station is busy or not broadcasting. ENTER. q 1 Check the network • For character input, see page 40. environment, then turn on this nnSwitching the display unit’s power (vpage 21 “Turning the power on”). Press INFO during Internet radio w If settings are required, make the “Setting the network reception. [Network]” (vpage 15). The broadcast station information and nnRegistering Internet Radio stations as your signal format bit rate are displayed. favorites Press INTERNET RADIO to switch You can register your favorite Internet stations in the 2 the input source to “Internet Favorite List (vpage 29). Radio”. nnRecently played Internet Radio stations nnInternet radio operation • For details on selecting the input source using the unit Recently played Internet Radio stations can be selected buttons, see “Selecting the input source using the main from “Recently Played”. Operation buttons Function unit” (vpage 21). Up to 20 stations can be stored in “Recently Played”. FAVORITES ADD Registration to the Favorite list FAVORITES CALL Call from the Favorite list Press ui to select the item you want to play, then On a top menu of the Internet Cursor operation uio p 3 press ENTER or p. 1 Radio station, press ui to select (Up/Down/Left/Right) “Recently Played”, then press ENTER Enter Repeat step 3 until the station list is displayed. ENTER or p. MENU Menu The station list is displayed. 4 SEARCH Character searchz • Any characters that cannot be displayed are replaced with Press ui to select the item you 2 Stop “.” (period) or “ ” (space). 2 want to play, then press ENTER z Press SEARCH, then press ENTER to select the or p. z Press ui to select the station, then press ENTER or first letter you want to search mode. 5 p. Playback starts once buffering reaches “100%”. If the list is not in alphabetical order, you may not be able to perform a character search.

23 Network audio playback Applying media sharing settings When using Windows Media Player 12 When using Windows Media Player 11 (Windows 7, Windows 8) Here, we apply the settings to share music files stored on a PC Start up Windows Media Player 11 on the PC. and NAS on the network. NOTE 1 nnSharing media stored on a PC Perform this procedure after changing the control panel display If you are using a media server, be sure to apply this setting to “Category”. Select “Media Sharing” in the “Library”. first. 2 In the PC’s “Control Panel”, select “Network 1 and Internet” – “Choose homegroup and sharing Click the “Share my media” check box, select options”. 3 “Marantz NA-11S1”, and then click “Allow”. Select the “Stream my pictures, music, and videos As you did in step 3, select the icon of the device 2 to all devices on my home network” check box and 4 (other PCs and mobile devices) you want to use as a select “Choose media streaming options”. media controller, and then click “Allow”.

Select “Allowed” in the drop-down list for “Marantz Click “OK” to finish. 3 NA-11S1”. 5 Select “Allowed” in the drop-down list for “Media Sharing media stored on a NAS device 4 programs on this PC and remote connections...”. Change settings on the Network Attached Storage (NAS) device to allow this unit and other devices (PCs and mobile Click “OK” to finish. devices) used as media controllers to access the NAS. For 5 details, see the owner’s manual that came with the NAS.

24 Network audio playback Playing files stored on a PC and NAS nnMusic server operation • Connections to the required system and specific settings Operation buttons Function Use this procedure to play music files or playlists. must be made in order to play music files (vpage 8). FAVORITES ADD Registration to the Favorite list • Before starting, you must launch the computer’s server Prepare for playback. software and set the files as server contents. For details, see FAVORITES CALL Call from the Favorite list q Check the network 1 the operating instructions of your server software. uio p Cursor operation environment, then turn on this • The order in which the tracks/files are displayed depends on unit’s power (vpage 21 the server specifications. If the tracks/files are not displayed ENTER Enter “Turning the power on”). in alphabetical order due to the server specifications, MENU Menu w If settings are required, make searching by the first letter may not work properly. SEARCH Character searchz1 the “Setting the network • WMA Lossless files can be played when using a server [Network]” ( page 15). 8, 9 v supporting transcoding, such as Windows Media Player Ver. Skip to previous or next file e Prepare the computer 11 or later. (Press and release) (vpage 24 “Applying 8, 9 Fast-reverse the file / media sharing settings”, NOTE (Press and hold) Fast-forward the filez2 vpage 46 “About Music When playing back music files with your PC or NAS connected 1/3 Playback / Pause server”). through wireless LAN, audio may be interrupted depending on your wireless LAN environment. In this case, play back music 2 Stop Press MUSIC SERVER to switch the input source to files with your PC or NAS connected through wired LAN. Random playback RANDOM 2 “Music Server”. (vpage 32)z3 • For details on selecting the input source using the unit Repeat playback nnPlaying repeatedly (Repeat playback) REPEAT buttons, see “Selecting the input source using the main (vpage 32) unit” (vpage 21). (vpage 32) z1 Press SEARCH, then press ENTER to select the first letter Press ui to select the server including the file to be nnPlaying random order (Random playback) you want to search mode. 3 played, then press ENTER or p. z2 This function is available while an MP3 / WAV / AAC / (vpage 32) FLAC file is being played back. Press ui to select the search item or folder, then z3 During random playback of files stored on a PC, each 4 press ENTER or p. time playback of a track is completed, another track is nnSwitching the display randomly selected for playback from tracks in the folder. Repeat step 4 until the file is displayed. 5 During playback, press INFO. • The display switches each time INFO Press ui to select the file, then pressENTER or p. is pressed. • If the list is not in alphabetical order, you may not be able to 6 Playback starts once buffering reaches “100%”. perform a character search. • Depending on the server being used, some functions may be limited.

Artist name Album name

File type/Bit rate or Sampling Frequency

25 Network audio playback

Listening to Last.fm Use ui p to enter your username and password. Use ui to select menu and then press ENTER or p. Last.fm radio is not available in all countries. Please check 4 6 www.last.fm/hardware for more information. You’ll also need • For character input, see page 40. Popular Tags Play popular tags in your area. a subscription. Get one today at www.last.fm/subscribe. After inputting the username and password, select Popular Artists Play popular artists tags in your area. Prepare for playback. 5 “login”, then press ENTER. q Your Recent 1 Make sure this unit is If the username and password match, the top menu for Play your recent stations. connected to the Internet, Last.fm is displayed. Stations then turn on this unit’s power • The types of characters that can be input are as shown Your (vpage 21 “Turning the below. Recommended Play your recommended radio. power on”). Radio w If settings are required, make nn Username the “Setting the network GLower case charactersH Your Library Play your library. [Network]” (vpage 15). abcdefghijklmnopqrstuvwxyz Your Friend’s GUpper case charactersH Play your friend’s radio. Press ONLINE MUSIC to switch ABCDEFGHIJKLMNOPQRSTUVWXYZ Radio 2 the input source to “Last.fm”. GSymbolsH _ - Your Top Artists Play your top Artists. GNumbersH 0123456789 • For details on selecting the input Search Tag source using the unit buttons, see nn Password You can search station by Tag. Radio “Selecting the input source using the GLower case charactersH abcdefghijklmnopqrstuvwxyz main unit” (vpage 21). Search Artist You can search station by Artist. • If you do not have a Last.fm account, GUpper case charactersH Radio ABCDEFGHIJKLMNOPQRSTUVWXYZ press i to select “I am new to Last.fm”. Then press ENTER or p. GSymbolsH ! “ # $ % & ‘ ( ) z + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } Use ui to select a station, and press ENTER, p or Create an account in accordance with 7 1/3 to start playback. the instructions on the display. ~ (Space) GNumbersH 0123456789 Playback starts. If you have a Last.fm account, press ui to select “I 3 have a Last.fm account”. Then press ENTER or p.

26 Network audio playback nnLog out Listening to Spotify When you press p during playback, the following Disassociate this unit from your Last.fm account. 8 menu appears. Introduce your Marantz to a whole new world of music. With Love this track Loving tracks improves your Last.fm While the Last.fm top menu is Spotify, you can enjoy instant access to millions of songs. recommendations, and you can optionally 1 displayed, use ui to select “Log A Spotify Premium subscription is required. share them on popular social networks. Out”, then press ENTER. For details, see the Spotify homepage. http://www.spotify.com Ban this track If you ban a track, we won’t play it again. You can undo this on the Last.fm website. Use ui to select “OK”, then 2 press ENTER. Prepare for playback. q Make sure this unit is Scrobbling Scrobbling sends the tracks you played to 1 connected to the Internet, your Last.fm account. You can see charts then turn on this unit’s power of the music you’ve been listening to, get nnSwitching the display ( page 21 “Turning the recommendations for new music and events v power on”). in your area and share your listening tastes During playback, press INFO. w If settings are required, make with your friends. You can turn this service The file type/bit rate, artist name and the “Setting the network on or off using this option. The more you album name are displayed. [Network]” ( page 15). scrobble, the better your recommendations v e Complete step 4 and obtain a will become. Spotify account. • If you already have a Spotify NOTE account, you do not need to The password should be no longer than 90 characters obtain a new account. Use your existing Spotify account. nnLast.fm operation Operation buttons Function Press ONLINE MUSIC to switch uio p Cursor operation 2 the input source to “Spotify”. ENTER Enter • For details on selecting the input MENU Menu source using the unit buttons, see 9 Next (cue) “Selecting the input source using the 1/3 Playback main unit” (vpage 21). 2 Stop 3 If you have a Spotify account, then press ENTER.

27 Network audio playback nSwitching the display Use ui p to enter your username and password. Use ui to select menu and then press ENTER or p. n 4 6 During playback, Press INFO. Searches for tracks, artists and albums by GUpper case characters/Numbers/SymbolsH Search The display switches between artist entering keywords. ABCDEFGHIJKLMNOPQRSTUVWXYZ name and album title each time the button is pressed. ÄÀÁÂÃÅÆÇÐÈÉÊËÌÍÎÏÑÖÒÓÔÕØÜÙÚÛÝÞ What’s New Displays the list of the latest albums. 0123456789 Starred Displays the list of the starred tracks. ! “ # $ % & ’ ( ) z + , ; < = > GLower case characters/Numbers/SymbolsH Playlists Displays the playlists for Spotify. abcdefghijklmnopqrstuvwxyz äàáâãåæçðèéêëìíîïñöòóôõøüùúûýþÿß Accounts Manages accounts (Log out, Add new user, nnSpotify operation Switch to user). 0123456789 Operation buttons Function . @ - _ / : ˜ ? [ \ ] ^ ’ { | } HOME Move Top Menu Use ui to select a station, and press ENTER, p or uio p Cursor operation • When you enter the Spotify account and Search text, you 7 / to start playback. 1 3 ENTER Enter can use number buttons to select characters with diacritical Playback starts. marks. You can also select the base character and then INFO Display switches press MODE to change diacritical marks. When you press p during playback, the following 8, 9 Next/Previous (cue) • For character input, see page 40. 8 menu appears. 1/3 Playback/Pause 2 Stop Star this track After inputting the username and password, select Adds a star to the selected track. RANDOM Random playback 5 “login”, then press ENTER. REPEAT Repeat playback When the user name and password match, the Browse “Artist Displays the list of albums by the artist of registration confirmation message scrolls. name” the track that is being played back. • To continue, press ENTER and select “[accept]”. The Browse “Album Displays the list of tracks on the album that Spotify Top menu is displayed. To go back, press o and name” is being played back. select “[back]”.

28 Favorite function This section provides information on the Favorite function. Calling stations or files from the favorites Deleting stations or files from the favorite • The Favorite function allows you to register your favorite broadcast stations and files in the Favorite List in advance so list list that you can call and listen to the stations or files right away, whenever you want. Press FAVORITES CALL. Press FAVORITES CALL. • The contents that you can register and call are Internet radio 1 The Favorite list appears. 1 The Favorite list appears. station and music server. • You can register up to 50 items in the Favorite List. Press 8 9 or ui to select Press ui to select the station or 2 the station or file that you want 2 file that you want to delete, and Registering stations or files to the favorites to call, and press ENTER. press CLEAR. The respective function starts up list and playback starts. When the prompt “Delete?” 3 appears, press ENTER. Press FAVORITES ADD while the • Press 0 – 9, +10 to call files registered “Deleted” is displayed and the 1 Internet radio station or file to to the Favorite list by number. deletion is competed. register is played back. “Favorite” menu appears.

Press ui to select a number to 2 register the station or file, and press ENTER. “Added To Favorites” is displayed and the registration is competed. nnTo switch between registered stations and files nnTo cancel the operation during playback Press o. Press 8 9 or ui.

29 iPod playback The unit can play back music stored on an iPod, iPod touch, iPod classic, iPod nano and iPhone. Playing an iPod Use ui to select the item, then press ENTER to 4 select the music file to be played. nniPod (vpage 45) 1 Press X (on/standby) to turn on power to the main unit. Press 1/3. iPod 5 Playback starts. 2 Press USB to switch the input source to “USB”. NOTE • For details on selecting the input • 1st generation iPod nano and iPod video do not have Direct source using the unit buttons, see mode support. “Selecting the input source using the • Marantz will accept no responsibility whatsoever for any loss main unit” (vpage 21). of iPod data. • Depending on the type of iPod and the software version, Press MODE to select the display some functions may not operate. 3 mode. The display mode switches each nniPod operation time MODE is pressed. Operation buttons Function To connect an iPod to this unit, use the iPod cable supplied Switch between the Remote mode • There are two modes for displaying MODE with the iPod. the contents recorded on the iPod. and the Direct mode NOTE Remote mode ui Cursor operation (up/down) Display the menu or return to the • When connecting an iPhone to this unit, keep the iPhone at Display iPod information on the display of this unit. least 20 cm away from this unit. If the iPhone is kept closer o previous menu to this unit and a telephone call is received by the iPhone, Direct mode Enter the selection or plays the ENTER or p noise may be output from this device. Display iPod information on the iPod screen. track • If the iPod is connected using an iPod cable (commercially • “Direct iPod” is displayed on the display of this unit. available) that is longer than 2 m, sound may not be played 8, 9 Play the track from the beginning / correctly. In this case, use a genuine iPod cable, or a cable Display mode Remote mode Direct mode (Press and release) Play the next track that is shorter than 1 m. , Fast-reverse the track / Display location Main unit display iPod display 8 9 (Press and hold) Fast-forward the track Playable Audio file P P Play the track / Pause the track files Video file Pz 13 Remote 2 Stop Active control and P P REPEAT Switch the repeat function buttons main unit RANDOM Switch the shuffle function iPod P zzOnly audio is played back. • The default display mode setting is “Direct mode”.

30 iPod playback nnSwitching the display Supported iPod models

During playback, press INFO. • iPod classic • The display switches each time INFO is pressed (Remote mode only).

Artist name Album name

• iPod nano nnPlaying repeatedly (Repeat playback) (vpage 32) (Remote mode only) nnPlaying random order (Random playback) (vpage 32) • iPod touch Disconnecting the iPod Press X (on/standby) to set the 1 standby mode. Disconnect the iPod from the 2 USB port. • iPhone Charging the iPod You can charge your iPhone/iPod by connecting it to the USB port. nnStandby charging If the unit enters power standby mode while the iPod/ iPhone is charging, the unit will switch to standby charging mode, and the iPod/iPhone will continue to be charged. When in standby charging mode, the power display light turns orange. When the iPhone/iPod is fully charged, the unit automatically stops supplying power for charging and enters normal power standby mode, and the power display light turns red.

31 USB memory device playback You can playback music stored on a USB memory device using this unit. Playing repeatedly (Repeat playback) • If the USB memory device is divided into multiple partitions, nnUSB memory device (vpage 45) only the top partition can be selected. Press REPEAT. • This unit is compatible with MP3 files conforming to “MPEG- Repeat playback starts. 1 Audio Layer-3” standards. • Each time you press REPEAT, the Playing files stored on USB memory • Marantz does not guarantee that all USB memory devices repeat mode is toggled as shown will operate or receive power. When using a portable USB devices below. connection type HDD of the kind to which an AC adapter can Connect the USB memory device to the USB port. be connected to supply power, use the AC adapter. 1 NOTE Single-track repeat All-track repeat USB • USB memory devices will not work via a USB hub. Repeat off memory • It is not possible to connect and use a computer via the USB (indicator turns off) device port of this unit using a USB cable. • Do not use an extension cable when connecting a USB memory device. This may cause radio interference with (Single-track repeat) Only 1 track plays repeatedly. other devices. • Files can be read from a USB memory device by connecting All tracks within the current the device to this unit. The file reading time varies according (All-track repeat)  playback folder are repeated. to the amount of data saved on the USB memory device. Several minutes may be required to read the maximum permissible number of files and folders. Repeat off • Note that Marantz will accept no responsibility whatsoever (indicator turns off) Normal playback resumes. Press X (on/standby) to turn on for any problems arising with the data on a USB memory 2 power to the main unit. device when using this unit in conjunction with the USB memory device. Playing random order (Random playback) Press USB to switch the input 3 source to “USB”. Removing the USB memory device Press RANDOM. • For details on selecting the input The indicator on the display is lighted source using the unit buttons, see Press X (on/standby) to set the and all tracks in the current playback “Selecting the input source using the 1 standby mode. folder are randomly played back. main unit” (vpage 21). Check that the communication Press ui to select the file or 2 indicator on the USB memory nnCanceling random playback 4 folder, then press ENTER or p. device is not flashing, then pull Press RANDOM. out the USB memory device. The indicator on the display turns off. Press ui to select the file, then 5 press ENTER, p or 1/3. NOTE Playback starts. Do not remove the USB memory device from the unit when the USB memory communication indicator is flashing. Doing so may damage the USB memory device, or may corrupt the files recorded on the USB memory device.

32 USB memory device playback nnUSB operation nnSwitching the display Operation buttons Function During playback, press INFO. ui Cursor operation • The display switches each time INFO ENTER or p Enter / Playback is pressed. Display the menu or return to the o previous menu SEARCH Character searchz1

, 8 9 Skip to previous or next file (Press and release) Artist name Album name 8, 9 Fast-reverse the file / (Press and hold) Fast-forward the filez2 File type/Bit rate or Sampling Frequency

1/3 Playback / Pause 2 Stop RANDOM Random playbackz3 REPEAT Repeat playback z1 Press SEARCH, then press ENTER to select the first letter you want to search mode. z2 This function is available while an MP3 / WAV / AAC / FLAC file is being played back. z3 During random playback of files stored on a USB memory device, each time playback of a track is completed, another track is randomly selected for playback from tracks in the folder.

If the list is not in alphabetical order, you may not be able to perform a character search.

33 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Playing iTunes music on this unit nnSelecting multiple speakers (devices) Use the Apple Remote appz for iPhone, iPod touch and iPad You can easily stream music from iTunes to multiple to control iTunes from any room in your home. Install iTunes 10, or later, on a Mac or PC that is speakers in your home. 1 connected to the same network as this unit. zzAvailable as a free download from the App Store. Click the AirPlay icon and select “Multiple Turn this unit ON. 1 Speakers” from the list. Streaming music stored in iPhone, iPod 2 Set “Network Control” (vpage 17) to “On” for this touch, or iPad directly to the unit unit. Check the speakers you want to use. NOTE 2 If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or When “Network Control” is set to “On”, the unit consumes later, you can stream music stored in your “iPhone/iPod touch/ more standby power. Multiple Speakers iPad” directly to this unit. Master Volume Launch iTunes and click the AirPlay icon Startup iPhone, iPod touch, or iPad music or iPod 3 displayed in the lower right of the window and select My Computer 1 app. This Computer this unit from the list. is displayed on the iPhone, iPod touch or iPad Marantz NA-11S1 screen. AirPlay Device

Tap the AirPlay icon . 2 Set “Network Control” (vpage 17) to “On” for this unit. NOTE Choose a song and click play in iTunes. When “Network Control” is set to “On”, the unit consumes 4 The music will stream to this unit. slightly more power in standby mode than when it is in “Network Control – Off” mode. It is still a small amount, however. 3 Select the speaker you want to use.

Marantz NA-11S1

Cancel

34 AirPlay function nnPerform iTunes playback operations with the remote control unit of this unit • Input source will be switched to You can use your Marantz remote control to play and pause “AirPlay” when AirPlay playback is iTunes, as well as skip to next and previous tracks. started. • You can stop AirPlay playback by Select “Edit” – “Preferences...” on the menu. pressing the o or choosing other input 1 source. • To see artist name or album name Select “Devices” in the iTunes setting window. together, press INFO. 2 • For information about how to use iTunes, also see the Help Check “Allow iTunes audio control from remote for iTunes. • The screen may differ depending on the OS and software 3 speakers”, and then click “OK”. versions. • When you connect iPod to the USB connector during AirPlay Devices playback, AirPlay playback stops.

General Playback Sharing Store Parental Devices Advanced

Device backups:

Delete Backup ...

Prevent iPods, iPhones, and iPads from syncing automatically

Warn when more than 5% of the data on this computer will be changed

Allow iTunes audio control from remote speakers

iTunes is not paired with any Remotes Forget All Remotes

Reset Sync History

? OK Cancel

35 Remote play function You can use your home network to play back with this unit music files stored on PC, NAS, smartphones and portable Settings required for each device nnRemote Play operations audio players. In this case, you use PC, smartphones and Operations are different for each device, but the procedures portable audio players for operations. You must make settings on DMC and DMS for Remote Play. for preparing for Remote Play are the same. The preparation Make the following settings. Also see the owner’s manual of procedures are shown below. each device for settings. • The relevant devices should comply with the DLNA (Digital Turn on this unit. Living Network Alliance) Ver. 1.5 standard. nnSettings on PC and NAS 1 • Make sure that this unit is connected to the network. • A wireless LAN environment is required for playing back Make settings on PC and NAS to exchange data with DMR music files on smartphones or portable audio players. devices. Display the music file playback screen on DMC. • For PC, open Windows Media Player 12, etc. • For some smartphones, you must install an application for For settings, see “Applying media sharing settings” 2 • For smartphones, switch to the music file playback DLNA music playback. (vpage 24). mode. nnSettings on smartphones nnRoles each device plays Select the friendly name of this unit for the item that You must install an application for DLNA music playback 3 sets the playback device on the playback screen. The following devices are used for Remote Play. As on your smartphone to perform operations on DMS and specified in the DLNA standard, these devices are called • The default friendly name of this unit is “Marantz this unit (DMR) with your smartphone. The applicable NA-11S1”. DMC, DMS or DMR according to their role. application differs according to your smartphone. Name Device example Role Start playing back a music file on DMC. • The function on this unit automatically switches to Performs Remote Play 4 DMC • PC Some smartphones support DLNA music playback with the Music Server and the Remote Play mark ( ) appears operations. (Digital • Smartphone factory settings. See the owner’s manual of your smartphone. on the display. Remote Play starts. DMC can also play back Media • Portable audio music files stored on Controller) player these devices. nnSettings on portable audio players NOTE Make settings so that this unit (DMR) can play back music During Remote Play, you cannot perform playback operations DMS • PC Stores music files. files stored on your portable audio player. For settings, see with this unit. Use the DMC device for these operations. (Digital • NAS Music files stored on the owner’s manual of your portable player. Media (Network these devices are played Server) Attached Storage) back with DMC. nnSettings on this unit nnTo exit Remote Play Outputs audio of Connect this unit to the DLNA network. You do not need to Press o. DMR music files played back make other settings. The Remote Play mode ends. (Digital through Remote Play • This unit For the network connection, see the provided Getting Media from speakers. DMR Started, “Connecting to a home network (LAN)” Renderer) cannot perform playback (vpage 8) and “Setting the network [Network]” operations. (vpage 15). nnFiles that can be played back See “About Music server” (vpage 46).

36 Web control function You can control this unit from a web control screen on a web browser. Enter the IP address of this unit in browser’s address When the top menu is displayed, click on the menu 4 box. 5 item youhttp://192.168.100.19/TopMenu/index.html want to operate. Bonjour apple Yahoo! Japan Google map YouTube Wikipedia news(41) • This unit and the PC need to be connected to the network For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19/”. Marantz NA-11S1 properly (vpage 8 “Connecting to a home network e y SLEEP (LAN)”) in order to use the web control function. http://192.168.100.19/TopMenu/index.html q NET Player View • Depending on the settings of your security-related software, w Bonjour apple Yahoo! Japan Google map YouTube Wikipedia news(41) r Internet Radio MUSIC SERVER you may not be able to access this unit from your PC. If this Marantz NA-11S1 USB FAVORITES SLEEP RELOAD u is the case, then change the settings of the security-related Setup Menu NET PC COAXIAL OPTICAL software. Player View Last.fm Spotify Internet Radio MUSIC SERVER o USB FAVORITES Switch the “Network Control” setting to “On” RELOAD FILTER Setup Menu FILTER NOISE SHAPER DC FILTER 1 (vpage 17). PC COAXIAL OPTICAL i 1 2 ON OFF ON OFF Last.fm Spotify Check the IP address of this unit with “Network AMP OPERATION FILTER q Entering the IP address. POWER On Standby Input 2 Information”. FILTER NOISE SHAPER DC FILTER • By adding this unit’s IP address to the browser’s t 1 2 ON OFF ON OFF [Network Information ] bookmark, you can display the web control screen using VOLUME ATT On Off the bookmark function the next timeAMP OPERATION you use the browser. IP Address If you are using POWERa DHCPOn serverStandby andInput “Network Control” e Click when you perform a power operation of the unit. 192.168.100.19 Checking the IP address. (vpage 17) is setVOLUME to “Off”, turningATT OntheOff power on/off r Click when you update to the latest information. changes the IP address. Normally, there is a change to the latest information each Start up the web browser. w If you are using the Safari web browser, you can select time you operate. When operating from the main unit, 3 “Bonjour” and directly access the unit’s web control click this or else the screen will not be updated. screen from the overview section. t Click to operate the Marantz amp connected by Remote connector cable (vpage 9). y Click “v” to set the sleep timer function. u Click a button to change the input source. i Click an item to make a FILTER settings. o Click when you operate the setup menu.

37 Web control function

Operate. 6 GNetwork SettingH

NETWORK NETWORK FIRMWARE Q4 Q0 Friendly Name Marantz NA-11S1 Set Set Default Q1 Top Menu Settings DHCP ON OFF IP Address 192.168.000.001 Subnet Mask 255.255.255.000 Gateway 000.000.000.000 Primary DNS 000.000.000.000 Secondary DNS 000.000.000.000 Q3 Proxy ON OFF Address Or Name Address Name Address 000.000.000.000 Port 00000

Test Connection Q2

Friendly Name setting Q0 To change the Friendly Name, enter the new name in the text box and click “Set”. Q1 To reset the Friendly Name, click “Set Default”.

Network connection settings Q2 Click to connect using the newly applied settings. Q3 When changing DHCP/proxy settings, input or select for each item. Q4 Click when you update firmware (vpage 13). NOTE • Items displayed may vary depending on selected items and connection status. • After selecting each item, wait a moment for the display to be updated. • To apply network connection settings, click “Test Connection” after making changes.

38 Using as a D/A converter Digital audio signals input from an external device or computer into this unit can be converted and output as analog signals Connecting and playing back from a nnConnection Use the rear panel USB port to connect this unit to a using this unit (D/A converter). computer (USB) personal computer. For the connection procedure, refer to the “PC connection” ( page 7) section. Connect and playback from a digital device This unit can play both PCM source and DSD source. v (Coaxial/Optical) nnInstalling the dedicated driver Press DIGITAL IN to change the input Before music files saved on a computer can be played on source to “PC”. Press DIGITAL IN to change the input this unit, the dedicated driver must be downloaded from source to “Coaxial” or “Optical”. the Marantz website, and installed in the computer. However, drivers do not need to be installed for Mac OS. NOTE The input digital audio signal is displayed as shown. • The dedicated driver must be installed in the computer before this unit is connected to a computer. Operation will “PC “PC The input digital audio signal is displayed as shown. not occur correctly if connected to the computer before PCM xxxx kHz“ or DSD xxxx MHz“ (xxxx indicates the sampling frequency.) “Coaxial “Optical the dedicated driver has been installed. Moreover, if the computer is running Windows XP as its OS, the computer’s PCM xxxx kHz“ or PCM xxxx kHz“ • If the sampling frequency cannot be detected, “Signal speed will decrease significantly, and a computer restart may (xxxx indicates the sampling frequency.) Unlock” will be displayed. be required. • When “PC/PCM xxxx kHz” is displayed on this unit, wait • If the sampling frequency cannot be detected, “Signal • Operation may fail in some computer hardware and software for approximately 10 seconds, and then start and operate Unlock” will be displayed. configurations. the music playback software on the computer. This unit functions as a D/A converter. NOTE nnComputer (recommended system) • Linear PCM signals with sampling frequencies of 32 kHz, NOTE 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and OS • Perform operations such as playback and pause on the 192 kHz can be input in the unit. • Windows® XP Service Pack3, Windows® Vista, Windows 7 computer. At this time, you cannot perform operations with • Do not input non-PCM signals, such as Dolby Digital, and or Windows 8 buttons on this unit or the remote control. DTS. This causes noise and could damage the speakers. • Macintosh OSX 10.6.4 or later. • You can also control the volume and equalizer on the • If the sampling frequency switches, such as from A mode computer. Enjoy playing music at the desired volume. to B mode in a CS broadcast, muting may operate for 1 – 2 Software • When this unit is functioning as a D/A converter, sound is not seconds, cutting the sound. • Server software supporting Windows Media Player® and output from the computer’s speakers. iTunes. • If the computer is disconnected from this unit while the computer music playback software is running, the playback USB software may freeze. Always exit the playback software before disconnecting the computer. • USB 2.0: USB High speed/USB Audio Class V2.0 • When an abnormality occurs on the computer, disconnect the USB cable and restart the computer. • The supported sampling frequencies are 32 / 44.1 / 48 / 64 / • DSD is a rgistered trademarak. 88.2 / 96 / 176.4 / 192 kHz (PCM) and 2.8224 MHz (DSD). • Microsoft, Windows XP, Windows Vista, Windows 7 and • The sampling frequency of the music playback software and Windows 8 are either registered trademarks or trademarks sampling frequency displayed on this unit may differ. of Microsoft Corporation in the United States and/or other • Use a cable that is 3 m or less to connect to the computer. countries. • Apple,Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

39 Other functions Inputting characters Using the number buttons Example: For changing characters from “POPS” to “ROCK” q Place the cursor at “P”. POPS On this unit, the names displayed for “Friendly Name” and Display the screen for inputting w Press CLEAR. search, screens can be changed as desired. 1 characters. OPS For inputting characters, there are two methods, as shown “P” is deleted. below. Place the cursor at the character e Press +10 to set the character type to upper case. Method Operations 2 to be changed with o p. r Press three times. ROPS • Operating with the remote control. “R” is input. Using the number • Multiple characters are assigned to Press +10 to select the character buttons a button, and each time the button 3 type (upper case, lower case, t Press p twice. is pressed, a character is switched. or numeric characters), and “R” is automatically registered, and the ROPS • Operating with the remote control press 0 – 9 to select the desired cursor placed “P”. Using the cursor or the main unit. character. y Press three times. buttons • Use uio p and ENTER to input ROCPS characters. “C” is input. u Press twice. • When you enter the Spotify account and Search text, you “C” is automatically registered, and “K” is ROCKPS nnDisplay of an input screen can select character types with a diacritical mark. input. GFriendly name inputH • The types of characters that can be input are as shown i Press p once. below. ROCKPS [Friendly name] Place the cursor at “P”. 1 . @ - _ / : ˜ m n o M N O 6 o Cursor Press CLEAR twice. ROCK a b c A B C 2 p q r s P Q R S 7 “P” and “S” are deleted. +10 : character type 1 ˜ 9 : a z d e f D E F 3 t u v T U V 8 Q0 Press ENTER to register the input name. zzThe current input character type is displayed. g h i G H I 4 w x y z W X Y Z 9 a : Lower case j k l J K L 5 0 (Space) ! “ # $ % & ‘ ( ) z A : Upper case + , ; < = > ? [ \ ] ^ ` { | } 1 : Numerics • Press CLEAR to delete the character. ä : Lowercase characters with a diacritical mark • For entering the characters assigned to one number button Ä : Uppercase characters with a diacritical mark continuously, press p to move the cursor to the right after entering a character then enter the next character. • For entering characters assigned to separate buttons, press the number button continuously. The cursor automatically moves to the next position, and the entered character is registered. Repeat step 2 and 3 to change the name then press 4 ENTER to register it.

40 Other functions Using the cursor buttons Auto power on function

Display the screen for inputting Press 1/3. 1 characters. The unit’s power turns on automatically, the previously selected source is played Use o p to set the cursor to the back. 2 character you want to change. 3 Use ui to change the character. Last function memory This stores the settings as they were immediately before going into the standby mode. • The types of characters that can be input are as shown When the power is turned back on, the settings are restored below. to as they were immediately before going into the standby GLower case charactersH mode. abcdefghijklmnopqrstuvwxyz GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ ! “ # $ % & ‘ ( ) z + , - . / : ; < = > ? @ [ \ ] ^ GSymbolsH _ ` { | } ˜ GNumbersH 0123456789 (Space)

• Press CLEAR to delete the character. • Press 9 to insert a space. Repeat steps 2 and 3 to change the name then press 4 ENTER to register it.

41 Information Information Here, we list various information related to this unit. Please refer to this information as needed.

F Part names and functions vpage 43 F Other information vpage 45 F Explanation terms vpage 48 F Troubleshooting vpage 50 F Specifications v page 54 F Index vpage 55

42 Part names and functions

For buttons not explained here, see the page indicated in parentheses ( ). Front panel Rear panel Q8 Q0 Q7Q6Q5Q4 Q3 Q2Q1Q0o i o i u

q w e r t y u q w e r t y q DIMMER button·································· (22) Q0 Illumination lamp ······························· (22) q ANALOG OUT connectors y External/Internal switch w USB port········································ (30, 32) Q1 Cursor buttons (uio p) (UNBALANCED/BALANCED)··············· (6) (EXT./INT.)············································· (9) Used to connect iPod or USB memory ·············· (11, 12, 15, 18, 23, 29, 30, 32, 40) w DIGITAL OUT connectors····················· (7) u AC inlet (AC IN)··································· (10) devices. Q2 ENTER button e DIGITAL IN connectors························· (7) i RS-232C connector······························· (9) e INPUT button································ (21, 54) ·············· (11, 12, 15, 18, 23, 29, 30, 32, 40) r NETWORK connector··························· (8) o FLASHER IN jack (IN)···························· (9) Selects the input source. Q3 Display t r Power operation switch Displays play status, settings, etc. REMOTE CONTROL connectors (IN/OUT)················································ (9) (X ON/STANDBY)······························ (21) Q4 STANDBY indicator···························· (21) t Headphones jack (PHONES)·············· (22) Turns power to this unit on and off Used to connect headphones. (standby). The STANDBY indicator changes as shown NOTE below according to the status of the unit. To prevent hearing loss, do not raise the • Power on : Off volume level excessively when using • Standby : Red headphones. • “Network Control” – “On” : Orange y Headphone volume control knob • iPod charge standby : Orange (LEVEL)················································· (22) Q5 Digital out off indicator u Information button (INFO) (DIGI. OUT OFF)··································· (18) ·························· (23, 25, 27, 28, 31, 33, 35) Q6 DISPLAY OFF indicator······················· (22) i Stop button Q7 Remote control sensor························· (4) (2)··························· (23, 25, 27, 28, 30, 33) Q8 Skip/Search buttons o Play/Pause button (1/3) (8, 9)··········································· (29) ······································ (27, 28, 30, 32, 41)

43 Remote control

q DIMMER button·································· (22) Q6 POWER button (X)····························· (21) w INTERNET RADIO button············· (21, 23) Q7 ONLINE MUSIC button q Q6 e MUSIC SERVER button················ (21, 25) ·················································· (21, 26, 27) w Q7 r FAVORITES CALL button Q8 FAVORITES ADD button ·················································· (23, 25, 29) e Q8 ·················································· (23, 25, 29) r t USB button······························ (21, 30, 32) Q9 DIGITAL IN button························ (21, 39) Q9 y HOME button································ (11, 28) W0 SLEEP button······································ (22) t W0 u FILTER button······································ (22) W1 MODE button································ (27, 30) y W1 i ENTER button W2 Information button (INFO) u ·············· (11, 12, 15, 18, 23, 29, 30, 32, 40) ·························· (23, 25, 27, 28, 31, 33, 35) i o Cursor buttons (uio p) W3 SEARCH button······················· (23, 25, 33) o ·············· (11, 12, 15, 18, 23, 29, 30, 32, 40) W4 Stop button (2) Q0 MENU button ································ (23, 25, 27, 28, 30, 33) ·························· (11, 12, 15, 18, 23, 25, 27) W5 REPEAT button·················· (25, 28, 30, 32) W2 Q1 W6 Q0 W3 Skip/Search buttons (8, 9) CLEAR button·························· (29, 40, 41) ································ (25, 27, 28, 29, 30, 33) Q1 Q2 Play/Pause button Q2 ( / )···························· (27, 28, 30, 32, 41) W4 1 3 Q3 W5 Q3 RANDOM button ············································ (25, 28, 30, 32) Q4 Number/Character buttons Q4 (0 – 9, +10)······································ (23, 40) Q5 Amplifier operation buttons W6 AMP power button (X) Q5 Attenuator button (ATT) INPUT buttons (df) VOLUME buttons (df)

• The supplied remote control can operate Marantz amplifiers. • When using it, also refer to the operating instructions of the other devices. NOTE The remote control may not operate some devices.

44 Other information iPod USB memory device Playing back music files recorded on a USB memory device. GCompatible formatsH Sampling Bit rate Bit length Extension Important information frequency WMA 32/44.1/ 48 – 192 • Only USB memory devices conforming to mass storage class and – .wma MTP (Media Transfer Protocol) standards can be played on this unit. (Windows Media Audio) 48 kHz kbps “Made for iPod” and “Made for iPhone” • This unit is compatible with USB memory devices in “FAT16” or mean that an electronic accessory has been MP3 32/44.1/ 32 – 320 “FAT32” format. – .mp3 designed to connect specifically to iPod, or (MPEG-1 Audio Layer-3) 48 kHz kbps • This unit is compatible with MP3 files conforming to “MPEG-1 Audio iPhone, respectively, and has been certified 32/44.1/ Layer-3” standards. by the developer to meet Apple performance 48/88.2/ 16 / • File types that this unit can play back and specifications are shown WAV – .wav standards. 96/176.4/ 24 bit below. Apple is not responsible for the operation of 192 kHz this device or its compliance with safety and GSupported file typesH .aac/ 32/44.1/ 16 – 320 regulatory standards. Please note that the use Supported file types USB memory devices z1 MPEG-4 AAC – .m4a/ of this accessory with iPod, or iPhone, may 48 kHz kbps 2 .mp4 affect wireless performance. WMA (Windows Media Audio) Pz 32/44.1/ AirPlay, the AirPlay logo, iPhone, iPod, iPod MP3 (MPEG-1 Audio Layer-3) P FLAC 48/88.2/ 16 / classic, iPod nano, iPod shuffle, and iPod (Free Lossless Audio – .flac WAV P 96/176.4/ 24 bit touch are trademarks of Apple Inc., registered Codec) in the U.S. and other countries. MPEG-4 AAC Pz3 192 kHz ALAC 32/44.1/ • Individual users are permitted to use iPhone, FLAC (Free Lossless Audio Codec) P 16 / iPod, iPod classic, iPod nano, iPod shuffle, (Apple Lossless Audio 48/88.2/ – .m4a ALAC (Apple Lossless Audio Codec) P 24 bit and iPod touch for private copy and playback Codec) z 96 kHz of non-copyrighted contents and contents 1 USB memory device z z Copyright [2012] [D&M Holdings. Inc.] whose copy and playback is permitted by z • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. Licensed under the Apache License, Version 2.0 (the “License”); law. Copyright infringement is prohibited by • This unit is compatible with WMA META tags. you may not use this file except in compliance with the License. law. • WAV format Quantization bit length: 16 or 24 bits. You may obtain a copy of the License at http://www.apache.org/ • FLAC format Quantization bit length: 16 or 24 bits. licenses/LICENSE-2.0 z2 Copyright-protected files can be played on certain portable players compatible with MTP. NOTE z3 Only files that are not protected by copyright can be played on this Variable Bit rate (VBR) is not supported (when playback is possible, unit. the time display in the display window will speed up and slow down). Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc. on a computer may be copyright protected, depending on the computer’s settings. NOTE File types that this unit does not support are not displayed.

45 USB memory device Network audio nnMaximum Number of Playable Files and Folder The limits on the number of folders and files that can be nnAbout Music server displayed by this unit are as follows. Important information This function lets you play music files and playlists (m3u, wpl) stored on a computer (music server) connected to this Media USB memory devices nnAbout the Internet Radio function unit via a network. Item • Internet radio refers to radio broadcasts distributed over With this unit’s network audio playback function, connection Memory capacity FAT16 : 2 GB, FAT32 : 2 TB the Internet. to the server is possible using one of the technologies Number of folder directory levels Internet radio stations from around the world can be below. 8 levels z1 received. • Windows Media Player Network Sharing Service • This unit is equipped with the following Internet radio • Windows Media DRM10 Number of folders 500 functions: Types of files that can be played back by each function Number of files z2 5000 • Stations can be selected by genre and region. G H • Internet radio stations in MP3 and WMA (Windows Internet radio Music server z1 z1 The limited number includes the root folder. Media Audio) format can be listened to. WMA (Windows z2 The allowable number of files may differ according to the P P • Your favorite radio stations can be registered by Media Audio) USB memory device capacity and the file size. accessing an exclusive Marantz Internet radio URL from MP3 (MPEG-1 a Web browser on a computer. P P Audio Layer-3) • The function is managed for individual users, so you must provide your MAC or e-mail address. WAV P Exclusive URL: http://www.radiomarantz.com MPEG-4 AAC Pz2 • The radio station database service may be suspended without notice. FLAC (Free P • This unit’s Internet radio station list is created using a radio Lossless Audio station database service (vTuner). This database service Codec) provides a list edited and created for this unit. ALAC (Apple Lossless Audio P Codec) A server or server software compatible with distribution in the corresponding formats is required to play music files via a network. z1 Music server • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. • This unit is compatible with WMA META tags. • If the image size (pixels) of an album artwork exceeds 500×500 (WMA/MP3/WAV/FLAC) or 349×349 (MPEG-4 AAC), then music may not be played back properly. z2 Only files that are not protected by copyright can be played on this unit. Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc. on a computer may be copyright protected, depending on the computer’s settings.

46 Network audio GPlayback file specificationsH nnAbout Last.fm Sampling Bit rate Bit length Extension Last.fm learns what you love... and it’s a great way to frequency discover new music. WMA Your new Marantz Network Audio Player is very clever. You 32/44.1/ (Windows 48 – 192 kbps – .wma can create a free Last.fm profile when you start using your 48 kHz Media Audio) Marantz Network Audio Player and magically keep track of all the songs you hear. MP3 When you sign in at www.last.fm, you can see your top (MPEG- 32/44.1/ 32 – 320 kbps – .mp3 music charts, view thousands of reviews, biographies and 1 Audio 48 kHz artwork, and get recommendations for local performances Layer-3) you won’t want to miss. 32/44.1/ With an affordable subscription you can enjoy an endless 48/88.2/ 16 / WAV – .wav choice of personalised ad-free radio stations. Check out 96/176.4/ 24 bit www.last.fm/subscribe today for more details. 192 kHz Your subscription also gives you access to Last.fm radio .aac/ on a great range of music products, including your Marantz 32/44.1/ MPEG-4 AAC 16 – 320 kbps – .m4a/ Network Audio Player. This feature is not available in all 48 kHz .mp4 countries. Visit www.last.fm/hardware to find out more. FLAC 32/44.1/ nnAbout Spotify (Free 48/88.2/ 16 / – .flac Introduce your Marantz to a whole new world of music. Lossless 96/176.4/ 24 bit With Spotify, you can enjoy instant access to millions of Audio Codec) 192 kHz songs. ALAC A Spotify Premium subscription is required. (Apple 32/44.1/ For details, see the Spotify homepage. 16 / Lossless 48/88.2/ – .m4a http://www.spotify.com 24 bit Audio Codec) 96 kHz z zz Copyright [2012] [D&M Holdings. Inc.] Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 NOTE • Particularly when you play back large music files, depending on your wireless LAN environment, the playback sound may be interrupted. In this case, make the wired LAN connection. • Variable Bit rate (VBR) is not supported (when playback is possible, the time display in the display window will speed up and slow down).

47 Explanation terms

A F I V AirPlay FLAC iTunes vTuner AirPlay sends (plays) contents recorded FLAC stands for Free lossless Audio Codec, iTunes is the name of the multimedia player This is a free online content server for Internet in iTunes or on an iPhone/iPod touch to a and is a lossless free audio file format. provided by Apple Inc. It enables management radio. Note that usage fees are included in compatible device via the network. Lossless means that the audio is compressed and playback of multimedia contents including upgrade costs. ALAC (Apple Lossless Audio Codec) without any loss in quality. The FLAC license music and movies. iTunes supports many For inquiries about this service, visit the This is a codec for lossless audio compression is as shown below. main file formats including AAC, WAV, and vTuner site below. method developed by Apple Inc. This codec Copyright (C) 2000,2001,2002,2003,2004,200 MP3. vTuner website: http://www.radiomarantz. can be played back on iTunes, iPod or iPhone. com 5,2006,2007,2008,2009 Josh Coalson M Data compressed to approximately 60 – 70% This product is protected by certain intellectual can be decompressed to exactly the same Redistribution and use in source and binary MP3 (MPEG Audio Layer-3) property rights of Nothing Else Matters original data. forms, with or without modification, are This is an internationally standardized Software and BridgeCo. Use or distribution App Store permitted provided that the following audio data compression scheme, using the of such technology outside of this product App Store is a site that sells application conditions are met: “MPEG-1” video compression standard. It is prohibited without a license from Nothing software for such devices as the iPhone or • Redistributions of source code must retain compresses the data volume to about one Else Matters Software and BridgeCo or an iPod Touch, and is operated by Apple Inc. the above copyright notice, this list of eleventh its original size while maintaining authorized subsidiary. conditions and the following disclaimer. sound quality equivalent to a music CD. B • Redistributions in binary form must MPEG (Moving Picture Experts Group), W Bit rate reproduce the above copyright notice, this MPEG-2, MPEG-4 Windows Media DRM This expresses the read amount per 1 second list of conditions and the following disclaimer These are the names for digital compression This is a copyright protection technology of video/audio data recorded in a disc. A larger in the documentation and/or other materials format standards used for the encoding of developed by Microsoft. number means higher sound quality, but also provided with the distribution. video and audio. Content providers are using the digital rights means a larger file size. • Neither the name of the Xiph.org Foundation Video standards include “MPEG-1 Video”, management technology for Windows nor the names of its contributors may “MPEG- 2 Video”, “MPEG-4 Visual”, “MPEG- Media contained in this device (WM-DRM) D be used to endorse or promote products 4 AVC”. Audio standards include “MPEG-1 to protect the integrity of their content DLNA derived from this software without specific Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”. (Secure Content) so that their intellectual DLNA and DLNA CERTIFIED are trademarks prior written permission. property, including copyright, in such content and/or service marks of Digital Living Network S THIS SOFTWARE IS PROVIDED BY is not misappropriated. This device uses Alliance. Sampling frequency WM-DRM software to play Secure Content Some contents may not be compatible with THE COPYRIGHT HOLDERS AND Sampling involves taking a reading of a sound ® CONTRIBUTORS “AS IS” AND ANY EXPRESS (WM-DRM Software). If the security of the other DLNA CERTIFIED products. wave (analog signal) at regular intervals and WM-DRM Software in this device has been DSD (Direct-Stream Digital) OR IMPLIED WARRANTIES, INCLUDING, expressing the height of the wave at each BUT NOT LIMITED TO, THE IMPLIED compromised, owners of Secure Content This is an audio data recording method. Audio reading in digitized format (producing a digital (Secure Content Owners) may request that signals are stored on media such as Super WARRANTIES OF MERCHANTABILITY AND signal). FITNESS FOR A PARTICULAR PURPOSE Microsoft revoke the WM-DRM Software’s Audio CDs as delta-sigma modulated digital The number of readings taken in one second right to acquire new licenses to copy, display audio. The signal is composed of single-bit ARE DISCLAIMED. IN NO EVENT SHALL is called the “sampling frequency”. The larger THE FOUNDATION OR CONTRIBUTORS and/or play Secure Content. Revocation does values at a sampling rate of 2.8224MHz. the value, the closer the reproduced sound is not alter the WM-DRM Software’s ability to BE LIABLE FOR ANY DIRECT, INDIRECT, to the original. INCIDENTAL, SPECIAL, EXEMPLARY, OR play unprotected content. CONSEQUENTIAL DAMAGES (INCLUDING, A list of revoked WM-DRM Software is sent BUT NOT LIMITED TO, PROCUREMENT OF to your device whenever you download a SUBSTITUTE GOODS OR SERVICES; LOSS license for Secure Content from the Internet OF USE, DATA, OR PROFITS; OR BUSINESS or from a PC. INTERRUPTION) HOWEVER CAUSED AND Microsoft may, in conjunction with such ON ANY THEORY OF LIABILITY, WHETHER license, also download revocation list onto IN CONTRACT, STRICT LIABILITY, OR TORT your device on behalf of Secure Content (INCLUDING NEGLIGENCE OR OTHERWISE) Owners. ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 48 Windows Media Player Ver. 11 or later This is a media player distributed free of charge by Microsoft Corporation. It can be used to play playlists created with Windows Media Player Ver. 11 or later as well as files in such formats as WMA, DRM WMA, MP3 and WAV. WMA (Windows Media Audio) This is audio compression technology developed by Microsoft Corporation. WMA data can be encoded using Windows Media® Player. To encode WMA files, only use applications authorized by Microsoft Corporation. If you use an unauthorized application, the file may not work properly.

49 Troubleshooting

If a problem occurs first check the following: Symptom Cause Countermeasure Page 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? “No Network • The network is not properly • Select a source other than 21 3. Are the other devices operating properly? Connection” is set up. the network function. If this unit does not operate properly, check the items listed in the table below. If the problem displayed. • Perform “Quick Setup”. Getting persists, there may be a malfunction. Started In this case, disconnect the power immediately and contact your retail outlet. GInternet radio/Music server/iPod/USB memory deviceH GGeneralH Symptom Cause Countermeasure Page Symptom Cause Countermeasure Page When a USB • The set cannot recognize a • Check the connection. 32 memory device USB memory device. Set does • External noise or interference • Reset the microprocessor. 54 is connected, • A USB memory device not • Connect a USB memory 45 not operate is causing the set to “USB” is not conforming to mass storage device conforming to properly. malfunction. displayed. class or MTP standards is mass storage class or MTP Display not lit • Power cord not plugged in • Check the connections on 10 connected. standards. and sound not securely. the set’s rear panel and the • A USB memory device that • This is not a malfunction. 32 produced when connection of the power the set cannot recognize is Marantz does not guarantee power switched plug to the power outlet. connected. that all USB memory devices to on. will operate or receive power. Display lit but • Wrong input source selected. • Select the appropriate input 21 • USB memory device is • Connect the USB memory 32 sound not source. connected via USB hub. device directly to the USB produced. port. Display is off. • The Dimmer setting is set to • Set to something other than 22 iPod cannot be • The input source is set • Switch the input source to 21 “Off”. “Off”. played. to something other than “USB”. “USB”. For stereo • The connections of the • Check and remedy the 6 • Cable is not properly • Reconnect. 30 sources, the speaker cables or input connections. connected. positions of the cables are inverted. instruments are The file • Characters that cannot be • This is not a malfunction. – inverted. names are displayed are used. On this unit, characters that not displayed cannot be displayed are – Power turns • Set is damaged. • Turn off the power and properly (“...”, replaced with a “.” (period). off suddenly contact a Marantz service etc.). • Invalid tags are used for files • Use tags that are supported 45 and STANDBY center. within the USB memory by this unit. indicator flashes device connected to this red. unit. (Flashes at 0.25 second intervals)

50 Symptom Cause Countermeasure Page Symptom Cause Countermeasure Page Files on a USB • USB memory device is in a • Set the format to FAT16 or 45 Music stored on • DLNA server function is • If you use a NAS in – memory device format other than FAT16 or FAT32. For details, refer to a NAS cannot disabled. conformity with the DLNA cannot be FAT32. the USB memory device’s be played. standard, enable the DLNA played. operating instructions. server function in the NAS • USB memory device • When divided into multiple – setting. is divided into multiple partitions, only files stored • NAS that does not conform • If you use a NAS that does 24 partitions. in the top partition can be with the DLNA is used. not conform with the DLNA played. standard, play the music via • Files are stored in a non- • Record the files in a 45 a PC. Set Windows Media compatible format. compatible format. Player’s media sharing • You are attempting to • Files that are copyright 45 function and add NAS to the play a file that is copyright protected cannot be played selected play folder. protected. on this set. • The connection is restricted. • If connection is restricted, – Internet radio • LAN cable is not properly • Check the connection status. 8 set audio equipment as the cannot be connected or network is connection target. played. disconnected. Server is not • The computer’s or router’s • Check the computer’s or – • Program is being broadcast • Only Internet radio programs 46 found, or it is firewall is activated. router’s firewall settings. in non-compatible format. in MP3 and WMA can be not possible to • Computer’s power is not • Turn on the power. – played on this set. connect to the turned on. • The computer’s or router’s • Check the computer’s or – server. • Server is not running. • Launch the server. – firewall is activated. router’s firewall settings. • Set’s IP address is wrong. • Check the set’s IP address. 15 • Radio station is not currently • Choose a radio station that is 23 Cannot connect • Radio station is not currently • Wait a while before trying – broadcasting. currently broadcasting. to favorite radio broadcasting. again. • IP address is wrong. • Check the set’s IP address. 15 stations. • Radio station is not currently • It is not possible to connect – Files stored • Files are stored in a non- • Record in a compatible 46 in service. to radio stations that are no on a computer compatible format. format. longer in service. cannot be • You are attempting to • Files that are copyright 46 A list of • Connection to the network is • Reconnect to the network or 8, 15 played. play a file that is copyright protected cannot be played broadcasting unstable. redo the “Network” setting protected. on this set. stations is not in the menu. displayed.

51 Symptom Cause Countermeasure Page Symptom Cause Countermeasure Page For some • Station is congested or not • Wait a while before trying – Cannot play • When you played all tunes of • Select another playlist. – radio stations, currently broadcasting. again. back music. the playlist. “Server Full” (“No more or “Connection tacks” is Down” is displayed.) displayed and Cannot access • Cannot connect to the • Check the network 8 station cannot the Last.fm. network. environment. be connected (“No network to. Connection” is Sound is broken • Network’s signal • This is not a malfunction. – displayed.) during playback. transfer speed is slow or When playing broadcast data Cannot access • You are accessing the • Last.fm radio is not available – communications lines or with a high bit rate, the sound the Last.fm. network from a country in all countries. Please check radio station is congested. may be broken, depending (“Not available where Last.fm radio is not www.last.fm/hardware for on the communications in your country” available. more information. conditions. is displayed.) Sound quality is • File being played has a low • This is not a malfunction. – Cannot login • Incorrect username or • Enter the correct username – poor or played bit rate. to Last.fm. password entered for login and password and retry login. sound is noisy. (“Incorrect user authentication. or password” is GLast.fmH displayed.) Symptom Cause Countermeasure Page Cannot create • The username has already • Enter another username – Cannot login • Login authentication error. • Enter the correct username – and register been taken. to create and register the to Last.fm. and password and retry login. an account. account. (“Subscription • If a nonsubscriber user • You need to be a paid Last.fm – (“Try another required” is accesses it. Or when the subscriber to listen to this. username” is displayed.) listening limitation exceeds Visit www.last.fm/subscribe displayed.) it. to upgrade. Cannot play • No music data to be played • Visit www.last.fm/download – back music. back. and install the Scrobbler to (“Library add the music you’ve played empty” is to your profile and make this displayed.) feature work.

52 GAirPlayH GRemote control unitH Symptom Cause Countermeasure Page Symptom Cause Countermeasure Page The AirPlay • This unit and the computer • Connect the computer or 8 Set does not • Batteries are worn. • Replace with new batteries. 4 icon is not or iPhone/iPod touch are iPhone/iPod touch to the work properly • You are operating outside of • Operate within the specified 4 displayed in not connected to the same same network as this unit. when remote the specified range. range. iTunes or on network (LAN). control • Obstacle between main unit • Remove the obstacle. – the iPhone/iPod • iTunes or the iPhone/iPod • Update to the latest 12 operated. and remote control. touch. touch do not have firmware firmware. • The batteries are not • Insert the batteries in the 4 that supports AirPlay inserted in the proper proper direction, following installed. direction, as indicated by the the polarity marks in the No sound. • This unit is not selected in • Start iTunes or switch on 34 polarity marks in the battery battery compartment. the screen that is displayed the iPhone/iPod touch, click compartment. • Move the set to a place in 4 when iTunes or the iPhone/ the AirPlay icon in the • The set’s remote control which the remote control iPod touch is started. displayed screen, and select sensor is exposed to sensor will not be exposed to this unit. strong light (direct sunlight, strong light. When using • Some applications are • Quit the application running – fluorescent light, etc.). AirPlay with running in the background in the background of the the iPhone/ on iPhone/iPod touch/iPad. iPhone/iPod touch/iPad, and iPod touch/ then play using AirPlay. iPad, the sound • When playing via a wireless • To remedy this, change the – suffers from connection, outside network environment, e.g. intermittent conditions may affect the shorten the distance to the breaks or unit. wireless LAN access point. AirPlay does • The iPhone/iPod touch/iPad • Update the iPhone/iPod – not function. application or iTunes is not touch/iPad application or the latest version. iTunes to the latest version.

53 Resetting the microprocessor Specifications Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values and all previously stored custom settings will be have to be manually restored. nnAudio performance ENTER • Analog output Channels: 2 channels Playable frequency range: 2 Hz – 96 kHz Playable frequency response: 2 Hz – 50 kHz (–3 dB) (DSD mode, PCM sampling frequency: 192 kHz) 2 Hz – 20 kHz (PCM sampling frequency: 44.1 kHz) S/N: 110 dB (Audible Range) Dynamic Range: 110 dB (Audible Range) INPUT Harmonic Distortion: 0.001 % (1 kHz, Audible Range) • Output Level Unbalanced: 2.3 V RMS Stereo Pull the power cord out of the power outlet. Balanced: 4.6 V RMS Stereo 1 Headphone output: 30 mW/32 Ω/ohms (variable maximum) Plug the power cord into a power outlet while pressing ENTER and INPUT on the • Digital output 0.5 Vp-p 2 main unit. Coaxial: Optical: –19 dBm When the STANDBY indicator lights, release the buttons. • Digital input 3 “Initialized” appears in the display. Coaxial: 0.5 Vp-p Optical: –27 dBm or later USB (Front) USB Type A (USB 2.0 High speed) If “Initialized” does not display in step 3, start over from step 1. USB (Rear) USB Type B (USB 2.0 High speed) nnPower supply Power supply voltage/frequency: AC 230 V, 50/60 Hz Power consumption: 50 W Power consumption in standby mode: 0.4 W Power consumption in “Network Control” – “On” mode: 3 W • For purposes of improvement, specifications and design are subject to change without notice.

54 Index vvA vvE vvN vvS Accessories··························································· 1 EXTERNAL···························································· 9 Network······························································ 15 Sampling frequency································ 45, 47, 48 AirPlay··························································· 34, 48 DHCP································································ 15 Secondary DNS··················································· 15 ALAC······················································· 45, 46, 48 vvF Friendly Name·················································· 17 Selecting the input source·································· 21 App Store·················································· 4, 34, 48 Favorite list·························································· 29 Last.fm Display················································· 17 Sleep timer·························································· 22 Audio Filter characteristics············································ 22 Network Control··············································· 17 Spotify··························································· 27, 47 DC Filter···························································· 18 Firmware Proxy································································· 16 Subnet Mask······················································· 15 Digital Out························································· 18 Add New Feature············································· 14 Noise Shaper······················································· 18 Supported iPod models······································· 31 Noise Shaper···················································· 18 Notification························································ 13 Phase································································ 19 Update······························································ 12 vvP vvT Auto-Standby······················································· 12 FLAC······················································· 45, 46, 48 Phase·································································· 19 Turning the power on·········································· 21 Friendly Name····················································· 17 Playback vvB Front panel·························································· 43 ALAC·························································· 45, 46 vvU Bit rate····················································· 45, 47, 48 FLAC··························································· 45, 46 Update on web screen········································ 13 vvG Internet radio···················································· 23 vvC Gateway······························································ 15 iPod··································································· 30 vvV Cable General Last.fm····························································· 26 vTuner··························································· 46, 48 Audio cable························································· 6 Auto-Standby···················································· 12 MP3···························································· 45, 46 Balanced audio cable·········································· 6 Firmware·························································· 12 MPEG-4 AAC·············································· 45, 46 vvW Music server····················································· 25 Coaxial digital cable········································ 6, 7 Language·························································· 12 WAV······························································ 45, 46 NAS·································································· 25 LAN cable······················································· 6, 8 Web control························································· 37 Network audio·················································· 23 iPod cable····················································· 6, 30 vvH Windows Media DRM··································· 46, 48 PC····································································· 25 Monaural mini-plug cable································ 6, 9 Headphones·················································· 22, 43 Windows Media Player································· 24, 49 Random···································· 25, 28, 30, 32, 33 Optical cable··················································· 6, 7 WMA······················································· 45, 46, 49 Remote connector cable································ 6, 9 vvI Remote play····················································· 36 Repeat······································ 25, 28, 30, 32, 33 USB cable······················································· 6, 7 Inputting characters······································ 40, 41 Spotify······························································ 27 Characters··············································· 26, 40, 41 INTERNAL····························································· 9 USB memory device··································· 32, 45 Charging the iPod················································ 31 Internet radio················································· 23, 46 WAV··························································· 45, 46 Condensation························································ 3 IP Address··························································· 15 WMA·························································· 45, 46 Connection iTunes······················································ 34, 36, 48 Analog (BALANCED)··········································· 6 Primary DNS························································ 15 Analog (UNBALANCED)····································· 6 vvL Proxy··································································· 16 Digital·································································· 7 Language····························································· 12 FLASHER IN······················································· 9 vvQ Last.fm·························································· 26, 47 Home network (LAN)·········································· 8 Quick Setup························································· 12 Last.fm Display··················································· 17 PC······································································· 7 Power cord······················································· 10 vvM vvR Remote control jacks·········································· 9 Rear panel··························································· 43 Menu map··························································· 11 RS-232C······························································ 9 Remote control··············································· 3, 44 Menu operation··················································· 11 Battery································································ 3 MP3························································· 45, 46, 48 vvD Remote mode····················································· 30 MPEG·································································· 48 D/A converter·················································· 7, 39 Resetting the microprocessor····························· 54 MPEG-4 AAC··········································· 45, 46, 48 DC Filter······························································ 18 Music server················································· 25, 46 Digital Out··························································· 18 Direct mode························································ 30 Disconnecting the iPod······································· 31 Display’s brightness············································ 22 DLNA··································································· 48 DSD······························································· 39, 48

55 CONNECTION WITH THE SOFTWARE OR THE USE OR c. You may otherwise modify Your copy of this Work applicable export laws. You agree to comply with all License OTHER DEALINGS IN THE SOFTWARE. (excluding the Articles) in any way to create a Derivative such laws and regulations that may apply to the Work This section describes software license Work, provided that You insert a prominent notice in after Your receipt of the Work. used for this unit. To maintain the correct nnFastDelegate each changed file stating how, when and where You 6. Representations, Warranties and Disclaimer. THIS http://www.codeproject.com/KB/cpp/FastDelegate.aspx changed that file. WORK IS PROVIDED “AS IS”, “WHERE IS” AND “AS content, the original (English) is used. d. You may distribute the standard version of the AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER Executable Files and Source Code or Derivative Work in WARRANTIES OR CONDITIONS OR GUARANTEES. nnBoost THE TERMS OF THIS CODE PROJECT OPEN LICENSE aggregate with other (possibly commercial) programs YOU, THE USER, ASSUME ALL RISK IN ITS USE, http://www.boost.org/ (“LICENSE”). THE WORK IS PROTECTED BY COPYRIGHT as part of a larger (possibly commercial) software INCLUDING COPYRIGHT INFRINGEMENT, PATENT Boost Software License - Version 1.0 - August 17th, 2003 AND/OR OTHER APPLICABLE LAW. ANY USE OF THE distribution. INFRINGEMENT, SUITABILITY, ETC. AUTHOR WORK OTHER THAN AS AUTHORIZED UNDER THIS e. The Articles discussing the Work published in EXPRESSLY DISCLAIMS ALL EXPRESS, IMPLIED Permission is hereby granted, free of charge, to any LICENSE OR COPYRIGHT LAW IS PROHIBITED. any form by the author may not be distributed or OR STATUTORY WARRANTIES OR CONDITIONS, person or organization obtaining a copy of the software and republished without the Author’s consent. The author INCLUDING WITHOUT LIMITATION, WARRANTIES accompanying documentation covered by this license (the BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED retains copyright to any such Articles. You may use OR CONDITIONS OF MERCHANTABILITY, “Software”) to use, reproduce, display, distribute, execute, HEREIN, YOU ACCEPT AND AGREE TO BE BOUND the Executable Files and Source Code pursuant to MERCHANTABLE QUALITY OR FITNESS FOR A and transmit the Software, and to prepare derivative works BY THE TERMS OF THIS LICENSE. THE AUTHOR this License but you may not repost or republish or PARTICULAR PURPOSE, OR ANY WARRANTY OF of the Software, and to permit third-parties to whom the GRANTS YOU THE RIGHTS CONTAINED HEREIN IN otherwise distribute or make available the Articles, TITLE OR NON-INFRINGEMENT, OR THAT THE WORK Software is furnished to do so, all subject to the following: CONSIDERATION OF YOUR ACCEPTANCE OF SUCH without the prior written consent of the Author. (OR ANY PORTION THEREOF) IS CORRECT, USEFUL, TERMS AND CONDITIONS. IF YOU DO NOT AGREE Any subroutines or modules supplied by You and linked BUG-FREE OR FREE OF VIRUSES. YOU MUST PASS The copyright notices in the Software and this entire TO ACCEPT AND BE BOUND BY THE TERMS OF THIS into the Source Code or Executable Files this Work shall THIS DISCLAIMER ON WHENEVER YOU DISTRIBUTE statement, including the above license grant, this restriction LICENSE, YOU CANNOT MAKE ANY USE OF THE WORK. not be considered part of this Work and will not be subject THE WORK OR DERIVATIVE WORKS. and the following disclaimer, must be included in all copies 1. Definitions. to the terms of this License. 7. Indemnity. You agree to defend, indemnify and hold of the Software, in whole or in part, and all derivative works a. “Articles” means, collectively, all articles written by 4. Patent License. Subject to the terms and conditions harmless the Author and the Publisher from and of the Software, unless such copies or derivative works Author which describes how the Source Code and of this License, each Author hereby grants to You against any claims, suits, losses, damages, liabilities, are solely in the form of machine-executable object code Executable Files for the Work may be used by a user. a perpetual, worldwide, non-exclusive, no-charge, costs, and expenses (including reasonable legal or generated by a source language processor. b. “Author” means the individual or entity that offers the royalty-free, irrevocable (except as stated in this attorneys??? fees) resulting from or relating to any use THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT Work under the terms of this License. section) patent license to make, have made, use, of the Work by You. WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, c. “Derivative Work” means a work based upon the Work import, and otherwise transfer the Work. 8. Limitation on Liability. EXCEPT TO THE EXTENT INCLUDING BUT NOT LIMITED TO THE WARRANTIES or upon the Work and other pre-existing works. 5. Restrictions. The license granted in Section 3 above is REQUIRED BY APPLICABLE LAW, IN NO EVENT OF MERCHANTABILITY, FITNESS FOR A PARTICULAR d. “Executable Files” refer to the executables, binary expressly made subject to and limited by the following WILL THE AUTHOR OR THE PUBLISHER BE PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO files, configuration and any required data files included restrictions: LIABLE TO YOU ON ANY LEGAL THEORY FOR EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE in the Work. a. You agree not to remove any of the original copyright, ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, DISTRIBUTING THE SOFTWARE BE LIABLE FOR e. “Publisher” means the provider of the website, patent, trademark, and attribution notices and PUNITIVE OR EXEMPLARY DAMAGES ARISING ANY DAMAGES OR OTHER LIABILITY, WHETHER IN magazine, CD-ROM, DVD or other medium from or by associated disclaimers that may appear in the Source OUT OF THIS LICENSE OR THE USE OF THE CONTRACT, TORT OR OTHERWISE, ARISING FROM, which the Work is obtained by You. Code or Executable Files. WORK OR OTHERWISE, EVEN IF THE AUTHOR OUT OF OR IN CONNECTION WITH THE SOFTWARE OR f. “Source Code” refers to the collection of source code b. You agree not to advertise or in any way imply that this OR THE PUBLISHER HAS BEEN ADVISED OF THE THE USE OR OTHER DEALINGS IN THE SOFTWARE. and configuration files used to create the Executable Work is a product of Your own. POSSIBILITY OF SUCH DAMAGES. Files. c. The name of the Author may not be used to endorse or 9. Termination. g. “Standard Version” refers to such a Work if it has not promote products derived from the Work without the a. This License and the rights granted hereunder will nnExpat been modified, or has been modified in accordance prior written consent of the Author. terminate automatically upon any breach by You of any http://www.jclark.com/xml/expat.html with the consent of the Author, such consent being in d. You agree not to sell, lease, or rent any part of the term of this License. Individuals or entities who have Expat License. Copyright (c) 1998, 1999, 2000 Thai Open the full discretion of the Author. Work. This does not restrict you from including the received Derivative Works from You under this License, Source Software Center Ltd h. “Work” refers to the collection of files distributed by Work or any part of the Work inside a larger software however, will not have their licenses terminated the Publisher, including the Source Code, Executable distribution that itself is being sold. The Work by itself, provided such individuals or entities remain in full Permission is hereby granted, free of charge, to any Files, binaries, data files, documentation, whitepapers though, cannot be sold, leased or rented. compliance with those licenses. Sections 1, 2, 6, 7, 8, person obtaining a copy of this software and associated and the Articles. e. You may distribute the Executable Files and Source 9, 10 and 11 will survive any termination of this License. documentation files (the “Software”), to deal in the i. “You” is you, an individual or entity wishing to use the Code only under the terms of this License, and You b. If You bring a copyright, trademark, patent or any Software without restriction, including without limitation Work and exercise your rights under this License. must include a copy of, or the Uniform Resource other infringement claim against any contributor the rights to use, copy, modify, merge, publish, distribute, 2. Fair Use/Fair Use Rights. Nothing in this License is Identifier for, this License with every copy of the over infringements You claim are made by the Work, sublicense, and/or sell copies of the Software, and to intended to reduce, limit, or restrict any rights arising Executable Files or Source Code You distribute and your License from such contributor to the Work ends permit persons to whom the Software is furnished to do from fair use, fair dealing, first sale or other limitations ensure that anyone receiving such Executable Files automatically. so, subject to the following conditions: on the exclusive rights of the copyright owner under and Source Code agrees that the terms of this License c. Subject to the above terms and conditions, this License copyright law or other applicable laws. apply to such Executable Files and/or Source Code. is perpetual (for the duration of the applicable copyright The above copyright notice and this permission notice 3. License Grant. Subject to the terms and conditions of You may not offer or impose any terms on the Work in the Work). Notwithstanding the above, the Author shall be included in all copies or substantial portions of the this License, the Author hereby grants You a worldwide, that alter or restrict the terms of this License or the reserves the right to release the Work under different Software. royalty-free, non-exclusive, perpetual (for the duration recipients’ exercise of the rights granted hereunder. You license terms or to stop distributing the Work at any of the applicable copyright) license to exercise the time; provided, however that any such election will not THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT may not sublicense the Work. You must keep intact all WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, rights in the Work as stated below: notices that refer to this License and to the disclaimer serve to withdraw this License (or any other license INCLUDING BUT NOT LIMITED TO THE WARRANTIES a. You may use the standard version of the Source Code of warranties. You may not distribute the Executable that has been, or is required to be, granted under the OF MERCHANTABILITY, FITNESS FOR A PARTICULAR or Executable Files in Your own applications. Files or Source Code with any technological measures terms of this License), and this License will continue in PURPOSE AND NONINFRINGEMENT. IN NO EVENT b. You may apply bug fixes, portability fixes and other that control access or use of the Work in a manner full force and effect unless terminated as stated above. SHALL THE AUTHORS OR COPYRIGHT HOLDERS modifications obtained from the Public Domain or from inconsistent with the terms of this License. 10. Publisher. The parties hereby confirm that the Publisher BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER the Author. A Work modified in such a way shall still be f. You agree not to use the Work for illegal, immoral or shall not, under any circumstances, be responsible for LIABILITY, WHETHER IN AN ACTION OF CONTRACT, considered the standard version and will be subject to improper purposes, or on pages containing illegal, and shall not have any liability in respect of the subject TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN this License. immoral or improper material. The Work is subject to matter of this License. The Publisher makes no warranty

LICENSE whatsoever in connection with the Work and shall not ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, • Neither the name of the Xiph.org Foundation nor the nnMersenne Twister be liable to You or any party on any legal theory for any STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE names of its contributors may be used to endorse or http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/ OR OTHERWISE) ARISING IN ANY WAY OUT OF THE damages whatsoever, including without limitation any promote products derived from this software without MT2002/CODES/mt19937ar.c general, special, incidental or consequential damages USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE specific prior written permission. arising in connection to this license. The Publisher POSSIBILITY OF SUCH DAMAGE. Copyright (C) 1997 - 2002, Makoto Matsumoto reserves the right to cease making the Work available THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT and Takuji Nishimura, to You at any time without notice nnlibvorbis HOLDERS AND CONTRIBUTORS ``AS IS’’ AND ANY 11. Miscellaneous http://www.xiph.org/vorbis/ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, All rights reserved. a. This License shall be governed by the laws of the BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF location of the head office of the Author or if the Author Copyright (c) 2002-2004 Xiph.org Foundation MERCHANTABILITY AND FITNESS FOR A PARTICULAR Redistribution and use in source and binary is an individual, the laws of location of the principal PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE forms, with or without modification, are Redistribution and use in source and binary forms, with place of residence of the Author. FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY or without modification, are permitted provided that the permitted provided that the following b. If any provision of this License is invalid or unenforceable DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, following conditions are met: conditions are met: under applicable law, it shall not affect the validity or OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT enforceability of the remainder of the terms of this • Redistributions of source code must retain the above LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 1. Redistributions of source code must retain the License, and without further action by the parties to OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR copyright notice, this list of conditions and the following this License, such provision shall be reformed to the BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON above copyright notice, this list of conditions minimum extent necessary to make such provision disclaimer. ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, and the following disclaimer. valid and enforceable. • Redistributions in binary form must reproduce the above STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 2. Redistributions in binary form must reproduce c. No term or provision of this License shall be deemed copyright notice, this list of conditions and the following OR OTHERWISE) ARISING IN ANY WAY OUT OF THE the above copyright notice, this list of waived and no breach consented to unless such waiver disclaimer in the documentation and/or other materials USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE conditions and the following disclaimer in the or consent shall be in writing and signed by the party to provided with the distribution. POSSIBILITY OF SUCH DAMAGE. be charged with such waiver or consent. • Neither the name of the Xiph.org Foundation nor the documentation and/or other materials provided d. This License constitutes the entire agreement nTremor with the distribution. between the parties with respect to the Work licensed names of its contributors may be used to endorse or n http://wiki.xiph.org/index.php/Tremor herein. There are no understandings, agreements or promote products derived from this software without 3. The names of its contributors may not be used representations with respect to the Work not specified specific prior written permission. Copyright (c) 2002, Xiph.org Foundation to endorse or promote products derived from herein. The Author shall not be bound by any additional this software without specific prior written THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT provisions that may appear in any communication from Redistribution and use in source and binary forms, with permission. You. This License may not be modified without the HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY or without modification, are permitted provided that the mutual written agreement of the Author and You EXPRESS OR IMPLIED WARRANTIES, INCLUDING, following conditions are met: THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF HOLDERS AND CONTRIBUTORS “AS IS” AND ANY MERCHANTABILITY AND FITNESS FOR A PARTICULAR • Redistributions of source code must retain the above EXPRESS OR IMPLIED WARRANTIES, INCLUDING, nnlibogg PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE http://www.xiph.org/ogg/ copyright notice, this list of conditions and the following BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY disclaimer. MERCHANTABILITY AND FITNESS FOR A PARTICULAR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, Copyright (c) 2002, Xiph.org Foundation • Redistributions in binary form must reproduce the above PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE Redistribution and use in source and binary forms, with LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, or without modification, are permitted provided that the OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR EXEMPLARY, OR CONSEQUENTIAL DAMAGES provided with the distribution. following conditions are met: BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, • Neither the name of the Xiph.org Foundation nor the OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, • Redistributions of source code must retain the above STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE names of its contributors may be used to endorse or DATA, OR PROFITS; OR BUSINESS INTERRUPTION) copyright notice, this list of conditions and the following OR OTHERWISE) ARISING IN ANY WAY OUT OF THE promote products derived from this software without HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, disclaimer. USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE specific prior written permission. WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT • Redistributions in binary form must reproduce the above POSSIBILITY OF SUCH DAMAGE. (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN copyright notice, this list of conditions and the following THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN disclaimer in the documentation and/or other materials nnTremolo HOLDERS AND CONTRIBUTORS ``AS IS’’ AND ANY IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. http://wss.co.uk/pinknoise/tremolo EXPRESS OR IMPLIED WARRANTIES, INCLUDING, provided with the distribution. BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF nzlib • Neither the name of the Xiph.org Foundation nor the Copyright (C) 2002-2009 Xiph.org Foundation Changes MERCHANTABILITY AND FITNESS FOR A PARTICULAR n http://www.zlib.net/ names of its contributors may be used to endorse or Copyright (C) 2009-2010 Robin Watts for Pinknoise PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE promote products derived from this software without Productions Ltd FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY zlib.h -- interface of the ‘zlib’ general purpose compression specific prior written permission. DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, Redistribution and use in source and binary forms, with library version 1.2.3, July 18th, 2005 OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT or without modification, are permitted provided that the THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler following conditions are met: HOLDERS AND CONTRIBUTORS ``AS IS’’ AND ANY OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON This software is provided ‘as-is’, without any express or BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF • Redistributions of source code must retain the above ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, implied warranty. In no event will the authors be held liable MERCHANTABILITY AND FITNESS FOR A PARTICULAR copyright notice, this list of conditions and the following for any damages arising from the use of this software. PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE disclaimer. OR OTHERWISE) ARISING IN ANY WAY OUT OF THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY Permission is granted to anyone to use this software for • Redistributions in binary form must reproduce the above USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, any purpose, including commercial applications, and to copyright notice, this list of conditions and the following POSSIBILITY OF SUCH DAMAGE. OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT alter it and redistribute it freely, subject to the following LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS disclaimer in the documentation and/or other materials restrictions: OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR provided with the distribution. BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

LICENSE 1. The origin of this software must not be misrepresented; License Information for the Software you must not claim that you wrote the original software. If you use this software in a product, an Used in the Unit acknowledgment in the product documentation would About GPL (GNU-General Public License), LGPL (GNU be appreciated but is not required. Lesser General Public License) License 2. Altered source versions must be plainly marked as This product uses GPL/LGPL software and software made such, and must not be misrepresented as being the by other companies. original software. After you purchase this product, you may procure, modify 3. This notice may not be removed or altered from any or distribute the source code of the GPL/LGPL software source distribution. that is used in the product. Jean-loup Gailly [email protected], Mark Adler madler@ Marantz provides the source code based on the GPL and alumni.caltech.edu LPGL licenses at the actual cost upon your request to our customer service center. However, note that we make no guarantees concerning the source code. Please also nncURL understand that we do not offer support for the contents http://curl.haxx.se of the source code. COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2011, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. nnc-ares http://c-ares.haxx.se Copyright 1998 by the Massachusetts Institute of Technology. Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.

LICENSE Dimensions

Unit : mm 10.5 68.0 417.0 266.0 400.0 66.0

440.0 17.0 109.0 127.0

67.0 18.0 69.0 302.0 69.0

Weight : 14.6 kg D&M Holdings Inc. 3520 10254 10AM