Topics and Scope - Advanced Machine tools and Tooling - Precision and Ultra-Precision Machining - Micro and Nano Machining - Nonconventional Machining - Green Manufacturing System - CAD/CAM/CAE - Numerical Control and HMI Technologies - Machine Tool Vibration and System Control - Robot and Process Automation - IT-BT Convergence Manufacturing - Ocean Plant Manufacturing Technologies - Etc.

Korean Core-Research Lab. Remote Tour - Exhibition of Core Laboratories in Korean Universities / Institutes for Global Research Cooperation.

International Forum and Panel Discussion - Future Trends of Global Manufacturing Technologies ICMTE Committee Korean Society of Manufacturing Technology Engineers

General Chairs General Co-Chairs

Dr. Jongkweon Park, KIMM. Prof. Dongyoung Jang, Seoultech Prof. Zhongqin Lin, Shanghai Jiao Tong Univ. Prof. Sunghyun Han, Kyungnam Univ. Prof. Guobiao Wang, National Natural Science Foundation of China Conference Chairs

Prof. Soohun Lee, Ajou Univ. Prof. Jun Ni, Shanghai Jiao Tong Univ.

Organizing Chairs & Committee Program Chairs & Committee

International Organizing Chairs International Program Chairs Prof. Byeong Hee Kim, Kangwon Nat. Univ. Prof. Min Sung Hong, Ajou Univ. Prof. Lifeng Xi, Shanghai Jiao Tong Univ. Prof. Huayong Yang, Zhejiang Univ.

International Organizing Committee International Program Committee Prof. Hong-Seok Park, Ulsan Univ. Dr. Seil Park, KRISS. Prof. Junghak Yoo, KoreaTech. Dr. Jeong Suh, KIMM. Prof. Sinyoung Lee, Kunsan Univ. Prof. Eun Sang Lee, Inha Univ. Dr. Seungkook Ro, KIMM. Prof. Jeong Woo Park, Chosun Univ. Prof. Jaeyeol Kim, Chosun Univ. Dr. Gyunmyeong Park, KITECH. Mr. In-Ho, Shin, KOMMA. Prof. Hyukhong Kwon, Daejin Univ. Prof. Hyunik Yang, Hanyang Univ. Prof. Shinill Kang, Yonsei Univ. Mr. Kyungdong Kim, KOMMA. Prof. Kyung-Soo Kim, KAIST Prof. Heeyoung Maeng, Seoultech Prof. Sungjun Park, Chonnam Nat. Univ. Prof. Sungchul Jee, Dankook Univ. Prof. Kang-Soo Lee, Hanbat Univ. Prof. Seongkeol Kim, Seoultech. Prof. Hae-Jin Choi, Chung-ang Univ. Prof. Kyuwon Jeong, Chungbuk Nat. Univ. Prof. Seongwook Hong, Kumoh Natl. Inst. Tech. Prof. Jaewoong Youn, Daegu Univ. Prof. Sungchul Jee, Dankook Univ. Prof. Honggun Kim, Jeonju Univ. Dr. Yeongeun Yoo, KIMM. Prof. Dotae Kim, Kyungil Univ. Prof. Bo Hyun Kim, Soongsil Univ. Prof. Tae-Woo Kim, Kookmin Univ. Dr. Seokwoo Lee, KITECH. Prof. Seogyoung Han, Hanyang Univ. Prof. Byung-Kwon Min, Yonsei Univ. Prof. Hyung Wook Park, UNIST Dr. Dongha Lim, KITECH. Prof. Seoung Soo Lee, Konkuk Univ. Prof. Yutaek Seo, KAIST Prof. Jungsuk Kim, PusanNat.Univ. Dr. Nakkyu Lee, KITECH. Prof. Dong Pyo Hong, Chonbuk Nat. Univ. Dr. Hyejin Lee, KITECH. Prof. Deugwoo Lee, Pusan Nat. Univ Prof. Jun Hee Hong, Chungnam Nat. Univ. Prof. Genbao Zhang, Chongqing Univ. Prof. He Yang, Northwestern Polytechnical Univ. Prof. Chuanzhen Huang, Shandong Univ. Prof. Chengyong Wang, Guangdong Univ. of Tech. Prof. Xianmin Zhang, South China Univ. of Tech. Prof. Shuxin Wang, Tianjin Univ. Prof. Kai Xu, Shanghai Jiao Tong Univ. Prof. Xu Han, Hunan Univ. Prof. Xinmin Lai, Shanghai Jiao Tong Univ. Prof. Xiangyang Zhu, Shanghai Jiao Tong Univ. Prof. Linfa Peng, Shanghai Jiao Tong Univ. Prof. Peisen Huang, Shanghai Jiao Tong Univ. Prof. Xinjun Sheng, Shanghai Jiao Tong Univ. Prof. Deyuan Zhang, Beihang Univ. Prof. Xibin Wang, Beijing Institute of Technology Prof. Rupeng Zhu, Nanjing Univ.

Secretary

Contact Information Sacretariat : Kim, Ji Sook and Seol, Min The Korean Society of Manufacturing Technology Engineers #424, TechnoPark 232 Gongreung-Ro, Nowon-Gu, Seoul, Republic of Korea, 139-743 Tel: 82-2-501-9172, 82-2-944-6545 Fax: 82-2-501-9173 General email: [email protected] Welcome Message Korean Society of Manufacturing Technology Engineers

On behalf of the Organizing Committee, it is our great honor and pleasure to welcome you to the 2014 International Conference of Manufacturing Technology Engineers, ICMTE 2014 in Jeju, Korea. The conference is aimed at facilitating interactions among engineers in the field of mechanical design & CAE, manufacturing, robotics & automation, with special efforts to some cutting-edge fields, such as nanotechnology, sustainable manufacturing etc. The manufacturing technology is playing a key role not only in current industries and economy, but also for politics and social security by creating high quality jobs. In this way, many countries put emphasis on manufacturing for their policies of governments. Also the globalization of production and market drives infinite competition and also cooperation. Hence we hope this conference provides a good opportunity to exchange professional experiences and to develop good fellowships. In this conference, many participants, especially from China and Korea will present about 200 papers including 7 excellent and interesting keynote speeches and will have discussions for two days from now on. I sincerely hope this conference will become a chance to enhance international cooperation and ultimately upgrade the global level of manufacturing technology. Also,I hope that global scientists engaged in the manufacturing technology field will cooperate with one another in improving the quality of human life and contributing to peace of the world. In addition, Jeju is an international city in the most beautiful island in Korea with full of exotic natural sceneries and various spot to enjoy, for example, Halla Mountain and Jeju folk village and so on, and October is the best season to visit Korea and we hope you have a great time in Jeju. Thank you very much.

Dr. Jong-Kweon Park General Chair / President of KSMTE Korea Institute of Machinery & Materials

❘1❘ ❚❚ Venue : Jeju KAL Hotel

◈ Location 151 Jungangno, Jeju City, Jeju Special Self-Governing Province, Korea (1691-9, Ido-1-dong, Jeju-si, Jeju-do, Korea)

Tel +82-64-724-2001 FAX : +82-64-752-4187

◈ Transportation Information

By Taxi Distance : Jeju International Airport → Jeju Kal Hotel (5km) Travel time : about 15 minutes Fare : about KRW 6,000 (Basic fare: KRW 2,800 for 2km / additional fare: about KRW 700 per km)

◈ Distance and Duration

From Jeju International Airport : 5km(15 minutes by Taxi) From Jeju Port : 5km (15 minutes Taxi) From Jeju Folk Village : 40km (50 minutes Taxi) From Seogwipo KAL Hotel : 38km (45 minutes Taxi) From Seongsanpo Port : 45km (60 minutes Taxi)

❚❚ Registration

Registration Information : Jeju KAL Hotel - Lobby 2F Registration Date : Sep. 30(Tue.), 18:00 ~ Registration Fee

Category Regular Student

KRW ￦ 600,000 ￦ 300,000 On-Site Registration USD $ 600 $ 300

❘2❘ ICMTE 2014 Schedule

September 30(Tue.)

Division Time Contents

Registration and Registration and Reception 18:00~ Welcome Reception

October 1(Wed.)

Division Time Contents Registration 9:00~ Registration and Information Opening 9:30~10:00 Opening Ceremony

Keynote Speeches and Special Speech 10:00~11:30 Korean Core-Research Lab. and Exhibition Remote Tour (open)

Paper Presentations 11:30~12:00 Poster presentations Lunch 12:00~13:30 Lunch and break Special Speech 13:30~15:00 Keynote Speeches Paper Presentations 15:00~15:30 Poster presentations Break 15:30~16:00 Coffee and Tea

International Forum and Panel Forum 16:00~18:00 Discussion

Nanta: Non-verbal Comedy 18:00~18:30 Show Banquet 18:30~19:00 Awards and etc. 19:00~20:00 Dinner

October 2(Thu.)

Division Time Contents Registration 09:00~ Registration and Information

Keynote Speech and Special Speech 09:30~10:00 Korean Core-Research Lab. and Exhibition Remote Tour (open)

10:00~11:30 Oral presentations Paper presentations 11:30~12:00 Poster presentations Lunch 12:00~13:30 Lunch and break Paper presentations 13:30~15:30 Oral presentations

❘3❘ Special Speech Part 1

Keynote Speech Ⅰ

Speech title : Energy efficient machine tools and technologies Speaker : Berend Denkena, Professor, Leibniz University Hannover, Date : October 1(Wed.), 10:00~10:30 Place : Grand Ballroom "A"

Keynote Speech Ⅱ

Speech title : Innovations in Metalworking Fluid Management for Sustainable Manufacturing Speaker : Shiv G. Kapoor, Professor, University of Illinois at Urbana-Champaign, USA Date : October 1(Wed.), 10:30~11:00 Place : Grand Ballroom "A"

Keynote Speech Ⅲ

Speech title : Multiscale Sustainable Manufacturing: Approaches, Implementation and Application Perspectives Speaker : Kai Cheng, Professor, Brunel University, UK Date : October 1(Wed.), 11:00~11:30 Place : Grand Ballroom "A"

Keynote Speech Ⅳ

Speech title : Generation and Applications of Engineered Surface Textures Speaker : Kornel F. Ehmann, Professor, Northwestern University, USA Date : October 1(Wed.), 13:30~14:00 Place : Grand Ballroom "A"

Keynote Speech Ⅴ

Speech title : Nano-Precision Manufacturing Technology Speaker : Dong-Ming Guo, President, Dalian University of Technology, China Date : October 1(Wed.), 14:00~14:30 Place : Grand Ballroom "A"

Keynote Speech Ⅵ

Speech title : Development of Sustainable Materials Processing Technologies Speaker : Yong-Taek Im, President, Korea Institute of Machinery and Materials, Korea Date : October 1(Wed.), 14:30~15:00 Place : Grand Ballroom "A"

❘4❘ Special Speech Part 2

Keynote Speech Ⅶ

Speech title : Modelling and Sensors in Smart Manufacturing Speaker : Fritz Klocke, Professor, Fraunhofer Institute for Production Technology Aachen, Germany Date : October 2(Thu.), 09:30~10:00 Place : Grand Ballroom "A"

❘5❘ International Forum and Panel Discussion

- Future Trends of Global Manufacturing Technologies

The "International Forum and Panel Discussion (hosted by Prof. Jun Ni, Univ. of Michigan)" is going to be held from 4:00pm to 6:00pm Oct 1st at the Grand Ballroom, Jeju KAL hotel. All the keynote speakers, profs. Shiv G. Kapoor (USA), Kornel F. Ehmann (USA), Kai Cheng (UK), Dong-Ming Guo (China), Yong-Taek Im (), Fritz Klocke (Germany), will participate in this forum as panels and talk about "Future Trends of Global Manufacturing Technologies". During the forum and panel discussion, the following interesting and weighty agenda/matters will be discussed; - Developmental strategy of national manufacturing technology of each country - Brief future trends of global advanced manufacturing technologies -Prospects (light and shade) of several emerging (promising) technologies; 3D printing, Cloud manufacturing, Bio manufacturing, Extreme manufacturing Green manufacturing, Extreme manufacturing, Prosumer manufacturing, etc.. … and more - Individual opinions on recent trends of the offshoring (e.g. relocation of a business process from developing countries to developed countries) - Brief introduction and progress (government support etc.) of Industry 4.0, Germany - The future manufacturing competitiveness of Asian developing countries … and more Please join this forum and take a valuable experience in ICMTE2014.

ICMTE2014 Program Committee

❘6❘ Korean Core-Research Lab. Remote Tour Exhibition of Core Laboratories in Korean Universities / Institutes for Global Research Cooperation

The 2014 International Conference of Manufacturing Technology Engineers (ICMTE 2014) Program Committee cordially invites you to join the Korean Core-Laboratory Remote Tour. The aim of this Remote Tour is to promote the research outcomes of excellent Korean manufacturing research laboratories and encourage the research collaboration between the participating laboratories and the domestic/international laboratories. We selected 23 excellent research laboratories among the laboratories applied via the IMCTE 2014 homepage (http://www. icmte.org/) and will present the "2014 National CORE-LAB for Manufacturing Tech." certificate panel sponsored by the Ministry of Trade, Industry & Energy (MOTIE). The selected Laboratories will participate to the exhibition of core Laboratories in Korean Universities during the ICMTE 2014. On the basis of the evaluation of international technical committee, we will award the "Best Research Lab of 2014 for Manufacturing Tech." certificate panel during the exhibition under the sponsorship of the MOTIE. We are looking forward for you to joining the Korean Core-Laboratory Remote Tour.

ICMTE2014 Program Committee

❘7❘ “Korean Core-Research Lab. Remote Tour" List

Organization Laboratory Ulsan National Institute of Science Multiscale Hybrid Manufacturing 1 and Technology Laboratory Advanced Lapping & Polishing 2 AM Technology/KITECH Technology 3 Technorise Co., Ltd Research Institute Korea Institute of Industrial Offshore Plant Resources R&D 4 Technology, Dongnam Technology Center Service Division Advanced Product 5 Doosan Infracore Development/Advanced Machine Tool Technology Team Korea Institute of Industrial Advanced Materials Machining 6 Technology System R&D Group Department of Mechanical 7 Chungbuk National University Engineering Robotics Research Center for Robot 8 Kyungnam University Intelligent Technology (Robotics & Control Lab.) Korea Electronics-Machinery 9 KEMCTI Convergence Technology Institute Korea Institute of Carbon 10 Convergence Process R&D Division Convergence Technology Innovative Design and Integrated 11 Seoul National University Manufacturing Laboratory Micro·Nano·Bio Systems 12 Kangwon National University Laboratory 13 Yonsei University Manufacturing & Mechatronics Lab Nano System Engineering 14 Pusan National University Laboratory Ajou University Industry-Academic Intelligent Multiscale Design and 15 Cooperation Foundation Process Lab.

Korea Institute of Machinery & 16 Hybrid Micro-Machining System Lab. Materials

17 A-TECH SOLUTION co., LTD Research and Development Center

Korea Institute of Industrial Korea Additive Manufacturing 18 Technology Innovation Center - KAMIC

Korea Institute of Machinery & High-Energy Beam based Hybrid 19 Materials Nano-Machining System Research Korea Institute of Machinery and Nano/Micro Injection Molding 20 Materials Laboratory Daegu Mechatronics & Materials Machinery & Robot Research 21 Institute Division 22 RAYGEN RAYGEN Research Center

23 LTS co. Ltd. LTS Core Research Lab.

❘8❘ ❘9❘ Program at a Glance

Time Sep., 30(Tue.) Oct., 1(Wed.)

09:00-09:30 Registration

Opening Ceremony 09:30-10:00 (Grand Ballroom)

Keynote Speech Ⅰ

10:00-10:30 Energy efficient machine tools and technologies Berend Denkena, Professor

Keynote Speech Ⅱ Innovations in Metalworking Poster 10:30-11:00 Fluid Management for Sustainable Session 1 Manufacturing Korean Core- (Exhibition) Shiv G. Kapoor, Professor Research Lab. Remote Tour Keynote Speech Ⅲ Multiscale Sustainable 11:00-11:30 Manufacturing: Approaches, Implementation and Application Perspectives Kai Cheng, Professor

Poster Session 1 11:30-12:00 (Evaluation)

12:00-13:30 Lunch and Break

Keynote Speech Ⅳ

13:30-14:00 Generation and Applications of Engineered Surface Textures Kornel F. Ehmann, Professor

Keynote Speech Ⅴ Nano-Precision Manufacturing Poster 14:00-14:30 Technology Session 2 Korean Dong-Ming Guo, (Exhibition) Core- Research Lab. President / Professor Remote Tour Keynote Speech Ⅵ

14:30-15:00 Development of Sustainable Materials Processing Technologies Yong-Taek Im, President

Poster Session 2 15:00-15:30 (Evaluation)

15:30-16:00 Break

16:00-17:00 International Forum and Panel Discussion

17:00-18:00 (Hosted by Dr. Jun Ni)

Registration and Banquet, NANTA Show and Awards and etc. 18:00-20:00 Welcome (Grand Ballroom) Reception

❘10❘ Program at a Glance

Time Oct., 2(Thu.)

09:00-09:30 Registration & Refreshments

Keynote Speech Ⅶ 09:30-10:00 Modelling and Sensors in Smart Manufacturing Fritz Klocke, Professor

10:00-10:30 Poster Session 3 10:30-11:00 Technical Sessions 1~6 (Exhibition) 11:00-11:30

11:30-12:00 Poster Session 3(Evaluation) Korean 12:00-13:30 Lunch and Break Core-Research Lab. Remote Tour 13:30-14:00

14:00-14:30 Technical Sessions 7~12 14:30-15:00

15:00-15:30

15:30-16:00

16:00-17:00 Evening free 17:00-18:00

18:00-20:00

Place

Place (floor) Registration Reception, Lobby 2F Track Ⅰ Grand Ballroom "A" 2 F Track Ⅱ Grand Ballroom "B" 2 F Track Ⅲ Mu Goong Hwa Room 2 F Track Ⅳ Rose Room 2 F Track Ⅴ Dong Baek Room 2 F Track Ⅵ Geum·Gun Ja Ran Room 19 F Speech and Forum Grand Ballroom "A" 2 F Banquet Grand Ballroom "A" 2 F (Opening and Welcome Reception) Exhibition Lobby 2F Poster session Lobby 2F VIP Lounge Dynasty Room 2 F

❘11❘ October 1(Wed.) [Poster SessionⅠ] 10:00~12:00

Green Manufacturing System Chairman : Prof. Young Hak Cho(SEOULTECH)

A Study on The Swelling Control in The Gravure Offset Printing G. E. Kim#, S. Kwon, B. K. Bae, T. M. Lee(KIMM) Empirical assessment on power consumption of feed drive systems for machine tools H. S. Yoon#, J. Y. Lee, M. S. Kim, E. S. Kim, Y. J. Shin, S. Y. Kim(Seoul NU), S. K. Min(Lawrence Berkeley National Laboratory, USA), J. Y. Won(Hyundai WIA CORP.), J. H. Cho, S. H. Ahn(Seoul NU) Energy Evaluation Process of Machine Tools – Case Study: Milling Machine M. S. Kim#, H. Sung Yoon, J. Y. Lee, E. S. Kim, Y. J. Shin S. Y. Kim(Seoul NU), J. H. Cho, Y. C. Yoon(Hyundai WIA Corporation), S. H. Ahn(Seoul NU) Equipment Data Management System for the production management of SMEs S. W. Lee#, S. J. Nam, J. K. Lee(KIMM) Reduction of pipe noise due to turbulent flow B. S. Kim(Wonkwang Univ), H. S.(Ludong University, China), J. Y. Park#, Yang Xu, Jung Ki Kim, Won Hyeong Lee, Ho Song Byeon(Wonkwang Univ) Reduction of stack noise in the manufacturing process of metal products B. S. Kim(Wonkwang Univ), H. Sun(Ludong University, China), J. Y. Park#, Y. Xu, J. K. Kim, W. H. Lee, H. S. Byeon(Wonkwang Univ) Study on Laser Soldering for Manufacturing Flip chip Packaging H. S. Kang#, J. w. Noh, J. Y. Choi(KIMM) An updated review on energy efficient machining J. Qian, S. Yu#(Shanghai Jiao Tong University, China) Guided Wave Propagation in High Speed Train Axle and Damage Detection based-on Wave Mode Conversion F. Li#(Shanghai Jiao Tong University, China)

Machine Tool Vibration and System Control Chairman : Prof. Young Hak Cho(SEOULTECH)

An Estimation on Mass and Stiffness of the Damping Boring Bar for Hybrid Passive/Active Absorber Design Y. Y. Guo#(KIMM), J. H. Hong(Chungnam NU), J. K. Park(KIMM), D. S. Song(Deamyeng Tech) Analysis of Abnormal Failure in Vibration-Based Energy Harvester J. W. Jin#(Kunsan NU), J. H. Kim(KRRI), Y. k. Kwon(KSPO), S. Y. Lee, K. W. Kang(Kunsan NU) A LED based Optical Thread Sensor for a Rotary Bobbin in Weaving Machine Y. S. Jung#, C. C. Byeon(Kyungpook NU) Dynamic Analysis of Hi-fi Desktop Speaker S. K. Kim, H. S. Jeong#(Seoul NU of Science and Technology) Evaluation of chatter vibration according to machining process in high peed machining for thin-walled aluminum alloy M. H. Cho#, J. S. Kim, H.O. Kim, J. Y. Koo(Pusan NU)

❘12❘ Gain scheduling control for positioning system with VCM and LM guide J. K. Kim#, C. H. Seo, S. H. Han, S. H. Lee, Y. H. Jeon, M. S. Hong, M. G Lee(Ajou Univ) Improvement of machine tool friction compensation controller using detailed feed drive component models W. K. Lee#, C. Y. Lee, B. K. Min(Yonsei Univ) Optimal design of micro forging mechanism for precise vibrating motion B. J. Choi#, H. H. Yeom, M. S. Hong, M. G. Lee, Y. H. Jeon(Ajou Univ) Stiffness Evaluation of a 2 Spindle 2-Turret Type Multi-Tasking Lathe Using Random Excitation Test Y. H. Choi, M. G. Hong#, T. y. Seo(Changwon NU), K. H. Kim(AMECO Co., Ltd.) Structural Design Optimization of a Cylindrical Screw Grinding Machine for Minimum Compliance and Weight Y. H. Choi, S. T. Kim, Ha. I. Lee#, C. M. Kim(Changwon NU), G. H. Sim(Reserch Institute, SNM Co) Structure/motion/control combined simulation of a wireless magnetic bearing stage B. S. Kim#, S. K. Ro(KIMM), D. I. Kim(LG Electronics Co. Ltd.), S. M. Kim, H. K. Choi(LG Display Co. Ltd.) Study on frequency response of dynamic focusing unit for laser machining system S. H. Han#, J. K. Kim, C. H. Seo, M. G. Lee(Ajou Univ) Vibration characteristics of precision stage for laser drilling process C. H. Seo#, M. S. Hong, M. G. Lee(Ajou Univ)

Precision and Ultra-Precision Machining Chairman : Prof. Moon Gu Lee(Ajou Univ.)

Analysis of the Basic properties of Chalcogenide Aspheric Lens T. S. Myung, J. B. Ko#(Hanbat NU) Application of ELID Grinding Technology to Burr Removal Process of Micro-holes T. S. Kwak#(Gyeongnam NU) Compensation method of machined shape error according to tool radius and curvature of curved surface in shaping T. J. Je#, E. C. Jeon, H. J. Choi, C. E. Kim(KIMM), E. S. Park(LG Electronics), D. S. Choi, K. H. Whang(KIMM) Design and verification of marking module for LED Post-process T. H. Seol, Y. H. Jeon, M. G. Lee#(Ajou Univ) Design of ultra precision hybrid machining system with actively compensated air bearing stages S. K. Ro#, G. H. Khim, J. K. Park(KIMM) Fabrication of free form mirror for LED crosswalk luminaires M. J. Ko, H. S. Shim, S. S. Park#(KITECH) Finite element simulation including strain softening phenomenon in cutting of Ti-6Al-4V I. S. Kang#, P. H. Kim, H. J. Choi(Daegu Mechatronics & Materials Institute), J. S. Kim(Pusan NU) High-precision machining of aspheric mirror surfaces for the space cryogenic infrared telescope S. W. Hyun#, G. J. Lee(KBSI), G. M. Ryu, H. Y. Sung, M. W. Jeon, G. H. Kim(KBSI, Chungnam NU) Structural and Optical Glass Characteristic for basic a Planning and Application of Chalcogenide Aspheric Lens T. S. Myung, J. B. Ko#(Hanbat NU)

❘13❘ Studies on the cutting force corresponding to the machining process during the threading with the Ti-6Al-4V titanium alloy. S. W. Park#, S. H. Oh, H. G. Shin(Chonbuk NU) Surface analysis of vibration electrochemical polishing (VECP) according to electrolyte vibration U. S. Kim#, J. W. Park(Chosun Univ) Three dimensional FEM simulation of the Ti–6Al–4V milling process I. E. Lee#, D. Y. Kim, H. W. Park(UNIST), M. W. Jeon(KBSI, Chungnam NU), M. W. Jung(KBSI, Gyeongnam NU of Science and Technology), G. J. Lee, S. W. Hyun, G. H. Kim(KBSI), T. S. Kwak(Gyeongnam NU of Science and Technology) Ultra Precision Polishing Compensation Processing on Form Accuracy of Single Crystal Si For Infrared Optical System M. W. Jeon#(KBSI, GRAST), M. W. Jung(KBSI, Gyeongnam NU), G. J. Lee, S. W. Hyun, G. H. Kim(KBSI), T. S. Kwak(Gyeongnam NU) A Study on Electro-Discharge Truing for Metal-bonded Grinding wheel M. W. Jung#, T. S. Kwak(Gyeongnam NU of Science and Technology) Fabrication of optical micro-structures in ultra-precision machining S. Wang#(Guangdong University of Technology, China), S. To(Guangdong University of Technology, China, The Polytechnic University, China), X. Chen, X. Ouyang, Q. Liu(Guangdong University of Technology, China) Modal Analysis and Experiment Testing of the Micro/nano-motion Platform Ro. l. Zhao#, X. Chen, K. Tian Li(Guangdong University of Technology, China) Tools Setting of 5 Axis Ultra-Precision Single point Diamond Lathe without OTS K. T. Li#, X. Chen, X. D. Chen, Q. Liu, X. B. Ouyang, H. J. Xia, J. Q. Liu(Guangdong University of Technology) Geometric error analysis and compensation of precision aligning platform with vision system X. Ouyang#(Guangdong University of Technology, China) Machining distortion minimization for manufacturing of aeronautical structure Y. Yang#, Z. Zhang, L. Li, N. He, W. Zhao (Nanjing University of Aeronautics & Astronautics, China) Mechanical alloying process of 70W29Mo1Cr mixed powder X#. Zhong, D. Guo, S. Shi, J. Lin(Dalian University of Technology, China) Preparation and Experiment of W-Mo-Cr Cup Wheel Used for Single Crystal Diamond in Dynamic Friction Polishing S. Shi#, X. Zhong, L. Jin, B. Yin(Dalian University of Technology, China) Study on mechanical-chemical polishing process of single crystal diamond J. Lin#, S. Shi, X. Zhong(Dalian University of Technology, China) Temperature Field Simulation of Diamond Crystal Used for Dynamic Friction Polishing S. Shi#, J. Lin, Lingchao Jin, B. Yin(Dalian University of Technology, China)

❘14❘ October 1(Wed.) [Poster Session Ⅱ] 13:30~15:30

Advanced Machine Tools and Tooling Chairman : Dr. Sung-Hak Cho(KIMM)

A study on burr generation mechanism and its minimizing condition in pure copper milling process J. K. Oh#, J. Y. Koo, J. S. Kim(Pusan NU) A Study on the EMI Shielding of Hybrid Composite using Wire Mesh and Fiber Reinforced Plastic M. S. Lee#, H. J. Shin, I. P. Cha, H. K. Yoon, S. W. Hong, J. Y. Kwon, T. H. Kim, H. G. Kim, L. K. Kwac(Jeonju Univ) Design and Finite Element Simulation on Piezoelectric Ceramic Actuator for Rotary Ultrasonic Spindle C. P. Li#, M. Y. Kim, T. J. Ko(Yeungnam Univ), J. K. Park(KIMM) Development and Performance Evaluation of Angle Head for 5-axis Internal Shape Machining J. H. Kim#, J. P. Kim, Y. T. Cho, Y. G. Jung(Changwon NU) Dynamic Analysis of Workpiece Automatic Mounting Mechanism I. S. Park, J. Y. Byun, S. W. Chung, J. M. Park, S. G. Kwon, S. H. Kwon, J. S. Kim, W. S. Choi#(Pusan NU) Experimental observation of the hard turning with the micro-patterned insert D. M. Kim#, I. U. Lee(UNIST), B. H. Kim(Soongsil Univ), H. W. Park(UNIST) Measuring thermal conductivity and analyzing temperature distribution of a diamond tool S. H. Park#, K. W. Jeong, S. H. Rhi(Chungbuk NU), J. S. Kim(Toolrex Diamond Corp) The evaluation of wear characteristics and machining performance depending on components of surface treatment for the endmill I. C. Yoon#, D. B. Kim, K. T. Youn(Daegu Mechatronis & Materials Institute), I. J. Yoon, J. H. Lee(OSG Korea Corporation), T. J. Ko(Y. N. Univ) An improved three-point method for on-machine roundness measurement H. Ma, C. Zhuang, Z. Xiong#(Shanghai Jiao Tong University, China) Cutting performance and wear mechanism of cobalt-free Ti(C,N)-based cermet cutting tools X. Chen#, J. Xu(Huazhong University of Science and Technology, China) Performance of coated cutting tools in turning a malleable cast iron T. Zhang#(Guangxi University, China), C. Wang, H. Yuan, Q. Wang(Guangdong University of Technology, China), Y. Song, Y. Hu(Guangxi University, China) An intelligent prediction system for CNC machine tools based on dynamic fuzzy neural network P. Jihong#(Wenzhou University, China) Cutting monitoring of Tool wear and cutting force in milling titanium alloy P. Huang#, J. Zhou(Shandong University, China) Microstructure and tribological properties of cubic boron nitride films on Si3N4 inserts via boron-doped diamond buffer layers F. Xu#, D. Zuo(Nanjing University of Aeronautics and Astronautics, China) The Wear Morphology and Wear Mechanisms of Coated Tools in high-speed milling of P20 Mold Steel H. Lin#, Z. Han(Fuzhou University, China)

❘15❘ CAD/CAM/CAE Chairman : Prof. Young-Tae Cho(Jeonju Univ.)

A simultaneous topology and shape optimization scheme Y. H. Kim, S. Y. Han#(Hanyang Univ) A Study of fouling phenomenon of dehumidification system using CFD E. A Jeong#, S. N. Yun, J. H. Park, J. W. Kim(KIMM) A Study on Adhesive Characteristics of Electrostatic Powder Coating System Applied to 3D Scanning Process H. Y. Maeng#, M. S. Lee, S.W. Park, J.H. Ahn(Seoul NU of Science & Technology) Development of a post-processor for the eyeglass frame cutting system and verification of the simulation model C. W. Park#, H. J. Choi, I. S. Kang(Daegu Mechatronics & Materials Institute), B. Y. Lee#(Keimyung Univ) Development of automated hot-water supplied system using solar panels K. H. Im#, K. Y. Kim, S. W. Lee, M. H. You, Y. D. Woo(Woosuk Univ), H. S. Lee(Green Tech) Development of multi-channel pressure measuring system for flexible and stretchable wrist smart band based on the fibers J. A. Lee#, E. J. Kim, D. Y. Lim, E. S. Yoo(KITECH) Drag coefficient and friction factor on the fundamental components for given surface roughness J. H. Park#, S. M. Chang, S. Y. Lee(Kunsan Univ), G. H. Gim(Soosan Heavy Industry Co., Ltd.) Fabrication of prototype waterproofing wrist smart band with temperature measurement function J. A. Lee#, E. J. Kim, D. Y. Lim, E. S. Yoo(KITECH) Numerical simulation of cold drawing process for Ni-Ti shape-memory-alloy fine tube S. K. Hong#, J. J. Kang, S. Y. Lee(KITECH), C. H. Park, J. T. Yeom(KIMS), J. D. Kim(KITECH) Robust design of micro flexure-hinge for auto-focus actuator S. K. Hong#, C. J. Hwang(KITECH), S. J. Lee(MICROMOLD Co., Ltd.), M. D. Lee(OPTIS Co., Ltd.), J. J. Kang(KITECH) Simulation based design of Eddy current sensor for inspection of bolts in oil filters K. H. Im#(Woosuk Univ), S. G. Lee, H. J. Kim, S. J. Song(Sungkyunkwan Univ), S. W. Ra(Seoul Metal Co. Ltd.), Y. D. Woo(Woosuk Univ), I. R. Kim(Seoul Metal Co. Ltd.) Six Sigma Approach to Improve Cycle Time of Monitor Back-cover in Injection molding J. S. Kim#(KITECH), J. K. Kim(LG Electronics Inc.), J. H. Jang(KITECH), Y. S. Do, J. g. Oh, Y. Joo Lee(U-tec), K. H. Yoon(Dankook Univ) Fluid-structure interaction analysis for a full scale mock-up under wind load Y. K. Kwak#, J. R. Park, S. C. Lyu(Yuseong) Study on PVA/HIPS filament mold base three-dimensional Alginate hydrogel scaffold fabrication characteristics D. H. Choi#, T. A. Vo, H. C. Kim(Inje Univ) Technique development of NDE of defects in aero-space composite parts using T-ray K. H. Im#, M. H. Kim, J. I. Kim, U. B. Park, S. W. Jeon, J. S. Jeong(Woosuk Univ), I. Y. Yang(Chosun Univ), D. K. Hsu(Iowa State University, USA) Topology optimization for a micro milling machine D. H. Moon, Y. H. Kim#, S. Y. Han(Hanyang Univ) Wafer Level Package Design Optimization Using FEM Based on The Size of Wafer H. J. Ko#, J. H. Kim, S. Y. Lim, K. H. Kim(Seoul NU of Science & Technology)

❘16❘ Three-dimensional simulation of electrochemical machining process with Lagrangian- Eulerian Formulation C. Y. He#, Z. G. Huang, L. Hu, C. J. Xiao, J. H. Xia, M. Wu, J. Q. Liu(Guangdong University of Technology, China) Static characteristics of torque motor for flow control servo valve J. W. Kim#, S. N. Yun, Y. B. Ham, E. A Jeong, Y. Tanaka(KIMM) Numerical study of the drilling process on the thrust force and delamination of composite laminates S.-y. Sun#, Z.-b. Yan(Dalian University of Technology, China) Undirected T-Spines for Free-form Surface Manufacturing J. Wang#, X. Xue, L. Zhou(NUAA, China)

Robot and Process Automation Chairman : Dr. Byung-Sub Kim(KIMM)

3-D Simulation for Micro Drill Bit Water-Jet Cleaning Robot System H. J. Choi#, K. J. Park(Daegu Mechatronics & Materials Institute), Y. Ho Kuk, S. R. Park(INSTERN Co.,Ltd) A Study on the Fault Detection and Analysis for CFRP Internal and External using Infrared Thermography T. H. Kim#, H. K. Yoon, J. B. Song, Y. G. Sin, S. G. Lim, H. D. Song, H. J. Shin, L. K. Kwac, H. G. Kim(Jeonju Univ) An assessment of the precision of a robotic system with hydraulic rotary actuator joints using a laser tracker C. W. Park#, H. J. Choi, B. S. Kim(Daegu Mechatronics&Materials Institute), B. Y. Lee(Keimyung Univ) Development of OLP (Off Line Programming) Exclusive Simulator for Grinding/Lapping Robot System H. J. Choi#, C. W. Park, K. J. Park, I. S. Kang(Daegu Mechatronics & Materials Institute), S. D. Choi(Kumoh National Institute of Technology) Development of Automated Grinding Process for Mobile Die-casting Bracket Using Multi-head Unit K. J. Park#, B. S. Kim(Mechatronics & Materials Institute), K. H. Bae(Sungnam Electron), S. H. Yoon(Kumoh National Institute of Technology) Development of robot automation system for forming process of spectacle frames I. S. Kang#, H. J. Choi, K. J. Park(Daegu Mechatronics & Materials Institute), W. S. Choi(Daesung Hi Tech Co., LTD.), D. J. Park(Korea Optical Industry Support Center) Rotary Transfer Forming Device for Process Reduction in Forming S. G. Kim#, K. H. Kim, J. W. Youn(Daegu Univ) Implementing production loss tracking system for SMEs using shop floor monitoring J. K. Lee#, S. W. Lee, S. J. Nam(KIMM) Manufacturing process of soft wearable robot hand B. H. Kang#, H. K. In, H. M. Lee, K. J. Cho(Seoul NU) Multi-purpose fusion reconnaissance system using multiple robot control H. J. Ko#, S. Y. Lim, D. H. Jnag, K. H. Kim, H. E. Lee(Seoul NU of Science & Technology) Propose of dual encoder system for improving accuracy of robot joint module C. J. Li#, C. H. Park, T. Y. Choi, H. M. Do, G. H. Kim, J. H. Kyung(KIMM) Design and performance analysis of biologic suction cup in the shape memory alloy (SMA) W. Yan#, J. Liu, F. Cao, Z. Fu, Y. Zhao(Shanghai Jiao Tong University, China)

❘17❘ Development of an integrated robotic belt grinding system for complex turbine blades H. Zhao#, S. Yan, G. Zhang, H. Ding(Huazhong University of Science and Technology, China) Hybrid Particle Swarm Optimization Algorithm for Job-Shop Robotic Manufacturing Cell Scheduling Problems Y. Yang#, C. Long, Q. Zeng (Guangdong University of Technology, China) Principles and optimal static driving characteristics of the piezoelectric micropump F. Cao, J. H. Liu, W. X. Yan, Z. Fu, Y. Z. Zhao# (Shanghai Jiao Tong University, China) The Design and Workspace Analysis of a New Remote Manipulator Using A 4-Cable-driven Propeller-embedded Platform M. Li#, W. Guo(Shanghai Jiao Tong University, China) Study on the accuracy enhancement of 3-axis coordinate measuring machineworking on the shop floor T. A. Vo#, N. T. Nguyen, T. H. Duong, H. C. Kim(Inje Univ) A Study on Flexible Grasping Control of Robotic Hand with 10 Joints for Unmanned FA J. S. Yang#, Y. M. Koo, M. Y. Park, B. K. Shim, S. H. Han(Kyungnam Univ) Implementation and application of a bending dielectric electroactive polymer actuator H. Wang#, J. Zhu, Q. Huang(Nanjing University of Aeronautics and Astronautics, China), Y. Zhu(Nanjing Forestry University, China) In-situ diagnosis and control of laser aided metal additive manufacturing process L. Song#(Hunan University), M. Jyoti(University of Michigan)

❘18❘ October 2(Thu.) [Poster Session Ⅲ] 10:00~12:00

IT-BT Convergence Manufacturing Chairman : Prof. Joosang Lee(Nambu Univ.)

A Condition-Based Real time Monitoring Systems for Precision equiopments with Ball-Screw via Vibration Signal W. G. Lee, Y. H. Jeon, J. W. Lee(Ajou Univ), H. J. Lee(KITECH), M. G. Lee#(Ajou Univ) Parametric study on the effect on the die shift according to the die-gap at wafer level packaging molding process S. M. Yeon#, J. H. Park, S. H. Park, N. K. Lee(Korea Institute of Industrial Technology), J. H. Kim(Seoul NU), H. J. Lee(Korea Institute of Industrial Technology) Removal Efficiency for Fine Fume from Steelworks by Two Types of Bag Filters Y. J. Seo(Kumoh National Institute of Technology), J. H. Park#(KITECH) Self-formation of porous hollow fiber for biological and environmental applications H. J. Kim#, C. S. Jang, B. H. Kim, Y. H. Seo(Kangwon NU)

Nonconventional Machining Chairman : Prof. Joosang Lee(Nambu Univ.)

A study on an electrode wear compensation method basedon the number of normal discharge and Uniform Wear Method in micro EDM V. Q. Nguyen, T. H. Duong, T. A. Vo#, H. C. Kim(Inje Univ.) Changing the pattern width according to the ratio of federate to spindle speed D. S. Han#, K. Qui, T. J. Ko(Yeungnam Univ), J. K. Park(KIMM) Characterization of indium tin oxide thin films grown by e-beam evaporation S. W. Lee#(KIMM, Chungnam NU), J. H. Kim, Y. E. Yoo, J. S. Yoon (KIMM) Controlled depth patterns in laser direct ablation using a zinc-coated layer B. X. Cao#(Univ of Science and Technology, KIMM), Y.K. Cho, D. S. Shin, J. H. Noh, H. K. Sohn(KIMM) Design of voltage source for electrostatic column array S. J. Lim#(Korea Institute of Machinery & Material) Fabrication of aluminum micro-lens cavity arrays using modified wet etching process of high purity aluminum for the durable micro-lens mold W. K. Jang#, B. H. Kim, Y. H. Seo(Kangwon NU) Fabrication of Piezo-Driven Micro-positioning 3-degree-of-freedom Stage using 3-dimensional printer D. H. Lee#, N. G. Cho(Graduate school of Hanyang Univ.) Scan device development for electron beam finishing instrument S. J. Lim#, J. Y. Choi(KIMM) Developments and applications of jet electrochemical machining W. Ming#, Z. Guo, T. Sun(Guangdong University of Technology, China) Electroforming mirochannel metal dies using simple multilayer photoresist moulds W. S. Zheng#, Z. N. Guo, J. F. He, S. Z. Jiang, Y. J. Tang, Y. J. Zhang (Guangdong University of Technology, China) Investigation on pulse electrochemical machining by coated electrode W. Ming#, Z. Guo, Y. Tang, G. Wang, T. Sun, S. Jiang (Guangdong University of Technology, China)

❘19❘ Development of a machine tool integrated with multiprocess of micromachining H. Luo#, Z. Guo, Y. Zhang, H. Lian(Guangdong Univ. of Technology, China) Research on pulse electrochemical machining of hardened GCr15 ball bearing steel G. Liu#, Y. Zhang, Y. Tang, C. Zhou(Guangdong University of Technology, China)

Ocean Plant Manufacturing Technologies Chairman : Prof. Joosang Lee(Nambu Univ.)

Component development for 3MW GEARLESS rotary variable offshore wind turbine J. E. Bae, D. H. Choi#, H. C. Kim(Inje Univ) Evaluation of seawater desalination apparatus using gas hydrate method K. C. Kang#(KITECH), K. N. Park(SEJINYoung Tech Co.), S. J. Cho, D. H. Lim, H. S. Moon, J. D. Lee(KITECH) Inhibition Effect of Poly vinyl-caprolactam via RAFT polymerization on Methane Gas Hydrate S. D. Seo#, D. H. Lim, H. S. Moon, J. D. Lee(KITECH), H. j. Paik(Pusan NU) The effect of Alloying Elements and Heat Treatments on the Mechanical Properties of A487 for Offshore Plant Mooring Systems J. W. Sim, Y. Cheol Lee#(Korea, Institute of Industrial Technology), H. N. Ahn, H. G. Kwan(DaeChang Solution Co, LTD), S. S. Kim(GyeongSang NU) Time dependent In-situ experiments for cage occupancy during CH4hydrate formation and decomposition using Raman spectroscopy S. J. Cho#(KITECH), J. M. Lee(Rice University, USA), J. D. Lee, K. C. Kang, Y. C. Lee, H. C. Kim(KITECH) Hydrate-Based Precombustion Carbon dioxide Capture in The Presence of Thermodynamic Promoters S. M. Lee#(KITECH), S. W. Park(SOTEC CO.), J. D. Lee, H. S. Moon, Y. C. Lee, D. H. Lim(KITECH), Y. W. Seo(Ulsan National Institute of Science and Technology) Kinetic experiments with in-situ Raman analysis on methane-ethane hydrate formation and dissociation in the presence of kinetic inhibitor S. Y. Hong#, S. D. Seo, D. H. Lim, H. S. Moon, Y. C. Lee, J. D. Lee(KITECH)

Micro and Nano Machining Chairman : Prof. Hyuk Hong Kwon(Daejin Univ.)

Experimental methods to reduce primary electron scattering from air molecules layer in Atmosphere Scanning Electron Microscopy S. J. Kim#, M. J. Park(Korea Electronics-Machinery Convergence Technology Institute), D. Y. Jang(Seoul NU of Science and Technology) A study on the comparing the results according to changes of runner system in the injection molding analysis for the camera-phone lens J. S. Lee#(Nambu Univ) A Study on the arrangement of the nano particles on the substrate with micro patterns for fabrication of nano-micro hybrid structures E. J. Yeo#(KIMM), S. H. Kim(KIMM, Chungnam NU), P. N. Thi(KIMM, UST), J. H. Kim(KIMM), Y. E. Yoo, D. S. Choi, J. S. Yoon(KIMM, UST) A study on the modulation of the surface profiles of the microlens array based on the volume contraction of photoresist mixture. S. H. Kim#(KIMM, Chungnam NU), E. J. Yeo, J. H. Kim(KIMM), Y. E. Yoo, D. S. Choi, J. S. Yoon(KIMM, UST)

❘20❘ Complementary temperature measurement methods of micro-heater using fluorescent dye and Infrared microscope J. M. Son#, Y. H. Cho(Seoul NU of Science & Technology) Design and analysis on a high-precision flexure-based mechanism Q. T. Bui#, S. K. Ro(KIMM, Korea Univ of Science and Technology), J. K. Park(KIMM) Design and fabrication of multi-copter drone based on 3D printing techniques S. W. Chun#(KITECH, Korea NU of Transportation), J. H. Park, S. H. Park, H. J. Lee, N. K. Lee(KITECH), S. J. Park(Korea NU of Transportation) Fabrication of compliant orthoplanar spring using micro-injection molding S. Y. Han#, W. B. Kim(Korea Polytechnic Univ) Fabrication of micro gas sensor using Si deep RIE process J. S. Park#, K. B. Park(Korea Electronics Technology Institute) Fabrication of nanostructured polymer prism for reduction of light reflection on prism surface Y. M. Park#, Y. H. Seo, B. H. Kim(Kangwon NU) Fabrication of plasmonic nanohole array for fiber-optic chemical sensing H. E. Joe#, G. H. Kim(Yonsei Univ), M. B. G. Jun(University of Victoria, ), N. C. Park, B. K. Min(Yonsei Univ)

Fabrication of QD sensitized TiO2 nanorods hydrogen evolution under visible light irradiation H. Kim#, B. L.g Yang(Kumoh National Institute of Technology) Fabrication of through-hole nanoporous alumina membrane and its water flow characteristics E. D. Han#, Y. M. Park, B. H. Kim, Y. H. Seo(Kangwon NU)

Fabrication of TiO2 nanorods on graphene/FTO for solar hydrogen production H. Kim#, J. S. Choi, S. J. An, B. L. Yang(Kumoh National Institute of Technology)

High-Performance of LiMn0.8Fe0.2PO4 with Hybrid Conductive Additives Based on Etched and Functionalized Multi-Walled Carbon Nanotubes H. C. Shim#(KIMM), T. H. Yu(Samsung Fine Chemicals), S. M. Hyun(KIMM) Inkjet-printed Zinc Acetate Precursor for Direct Selective Growth of ZnO Nanowire Arrays J. H. Kwon#, S. J. Hong, H. B. Lee, J. Y. Yeo(Seoul NU), S. S Lee(KAIST), S. H. Ko(Seoul NU) Manufacturing Smart Surface Texture for Reduction of Friction using Micro Abrasive Air Jet Machining S. C. Choi#, S. K. Ro, S. C. Lee, B. S. Kim, J. K. Park(KIMM) Micro/nano-hybrid lens for enhancing lightextraction using micro-milling and anodic aluminum oxide (AAO) S. H. Kim#(Seoul NU of Science & Technology), M. G. Kim, J. J. Kang(KITECH), P. A. Lee, B. H. Kim(Soongsil Univ), Y. H. Cho(Seoul NU of Science & Technology) Micro-nano pattern using the defoced laser beam on the metallic surface J. W. Noh#(KIMM, KAIST), M. J. Bae, H.K. Sohn(KIMM) Microtexturing process on cylindrical surface using micropattern transfer technique S. H. Seo#, Y. M. Park, D. H. Min, Y. H. Seo, B. H. Kim(Kangwon NU) Nanowire arrays for single bacterial cell analysis H. Yi, H. G. Ko, H. H. Park, H. E. Jeong#(UNIST) Plasmonic Laser Nanowelding of Copper Nanowire Percolation Network in Ambient Condition for Flexible and Stretchable Conductors S. Y. Han#, S. J. Hong(Seoul NU), J. Y. Ham(Stanford University, USA), J. Y. Yeo(UC Berkeley, USA), J. H. Lee(KAIST), B. C. Kang(Gyeongnam NU), P. Lee(Massachusetts Institute of Technology, USA), J. H. Kwon(Seoul NU), S. S. Lee, M. Y. Yang(KAIST), S. H. Ko(Seoul NU)

❘21❘ Quasi-3D micromachining using diamond tool patterned by ultrafast laser J. G. Kim#(KIMM), C. W. Kim(Pusan NU), T. J. Je, S. H. Cho, K. H. Whang(KIMM) Robust and Conductive Metal Infiltrated Graphene Oxide Membranes for Selective Polar-Vapor Permeation D. V. Lam#(UST, KIMM), T. Gong(SAINT), S. J. Won(KAIST), C. G. Lee(SAINT, Sungkyunkwan University), H. J. Lee, J. H. Kim, S. M. Lee(KIMM) Study on High Precision Milling using Plasma Ion source J. H. Won#, D. Y. Jang (Seoul NU of Science and Technology) Wettability modification of polymer surface using micromachining M. G. Gang#, K. W. Chae(Yonsei Univ), W. B. Kim(Korea Polytechnic Univ), Y. H. Jeong(Kyungpook NU), S. J. Lee, B. K. Min(Yonsei Univ) Analysis and simulation of micro-groove generation process in ultrasonic elliptical vibration turning C. Zhang#(Nanjing University of Aeronautics and Astronautics University, China), K. F. Ehmann(Northwestern University, USA), Y. Li, G. Shi(Nanjing University of Aeronautics and Astronautics University, China) Heated Spray Nanoparticle Deposition System Development M. Rukosuyev, A. Esmaeilirad, M. B.G. Jun#(University of Victoria, Canada) Micro drilling quality of the multi-layer IC substrate S. Li#, L. Zheng, C. Wang, B. Liao(Guangdong University of Technology, China), L. Fu(Shenzhen Jinzhou Precision Technology Corporation) Modeling of cutting force in micro end milling operation Y. Luyun#, J. Li, W. Xibin(Beijing Institute of Technology, China) Fabrication of CuO photocathode for hydrogen evolution under visible light irradiation H. Kim#, B. L. Yang(Kumoh National Institute of Technology) Detection of bio-molecular interactions by multi-scale microwell arrays integrated with microfluidic device S. H. Kim#, H. H. Noh, H. H. An, M. S. Kang, Y. H. Kim, J. S. Bae, R. Shin, E. H. Cho, S. I. Kang(Yonsei Univ) Molecular dynamics study of the hierarchical stick-slip motion between silicon tip and graphene H. M. Yoon#, J. S. Lee(Yonsei Univ) A High Voltage Pulse Discharge Micro Plasma Arc for Precision Polishing in Metal Surface W. Dai#(Huazhong University of Science and Technology, China) Biomimetic design of elastomer surface pattern for friction control under wet conditions W. Huang#(Nanjing University of Aeronautics and Astronautics) Modeling and experimental study on nanochannel depth control in AFM tip-based nanoscratching method J. Ren#(Shanghai Jiao Tong University, China)

Machine Tool Vibration and System Control Chairman : Prof. Hyuk Hong Kwon(Daejin Univ.)

Application of Condition Monitoring and Fault Diagnosis for Wind Turbines Y. Ao#(Guangdong University of Technology, China)

❘22❘ October 2(Thu.) 10:00~15:30 [Oral Session]

◉ Track 1

Technical Session [1] Chairman: Prof. Hong Seok Park (Univ. of Ulsan) Green Manufacturing System Grand Ballroom "A" 10:00~10:15 A Self-adjusting System for Forming Pulleys H. S. Park#, N. T. Le(Univ. of Ulsan) 10:15~10:30 Study on Printing Roll Manufacturing by using 3 Dimensional Laser Scanner H. S. Kang#, J. W. Noh, J. Y. Choi(KIMM) 10:30~10:45 Reliability-based design optimization for green manufacturing G. B. Zhang, Y. Wang#, Y. Ran, D. M. Luo(Chongqing University, China) 10:45~11:00 Friction Characteristic of TiCN, CrN, AlCrN Coated Fuel Engine Valve on Ship Building W. S. Choi#, M. J. Shin, S. M. Choi, J. Y. Byun, O. Adiyanto, S. W. Chung, J. M. Park, S. G. Kwon, S. H. Kwon, J. S. Kim, C. W. Kang(Busan Univ) 11:00~11:15 Study on Quality Prediction Technology of Manufacturing Supply Chain Y. Wang#, L. She(Chongqing University, China)

Technical Session [7] Chairman: Prof. Seok-min Kim(Chung-Ang Univ.) Micro and Nano Machining Ⅱ Grand Ballroom "A" 13:30~13:45 Fabrication of the Hydrophilic Line on a Hydrophobic Surface by a Laser Ablation Processing J. W. Noh#, H S. Kang, H.K. Sohn, J. H. Lee(KIMM) 13:45~14:00 Micro-Nano machining of hybrid process using femtosecond lasers for advanced display S. H. Cho#, J. W. Yoon, W. S. Choi, H. Y. Kim(KIMM, UST-KIMM), K. R. Kim(SungKyunKwan Univ), J. G. Kim(KIMM, UST-KIMM), K. H. Whang, J. K. Park(KIMM) 14:00~14:15 Superhydrophobic and Transparent Fluorinated Amorphous Carbon on Nanotextured Quartz D. S. Herdini(KIMM, UST)#, S. M. Ji(KIMM), H. E. Lim(KIMM, UST) 14:15~14:30 Mechanism of micromachining CVD diamond film by pulsed green laser F. L. Zhang#, C. d. Ouyang(Guangdong University of Technology, China) 14:30~14:45 Roll-to-roll Hot Embossing Process to Fabricate Micro-pyramid Arrays on PVC Film X. Lai#, P. Yi, L. Peng(Shanghai Jiaotong University, China)

❘23❘ ◉ Track 2

Technical Session [2] Chairman: Prof. Won-sik Choi(Busan NU) Advanced Machine tools and Tooling / Grand Ballroom "B" Ocean Plant Manufacturing Technologies 10:00~10:15 Analysis and Development of Coil Forming Machine J. W. Cho(Kongju NU), M. J. Shin, S. M. Choi, J. Y. Byun, S. W. Chung, J. M. Park, S. G. Kwon, S.H. Kwon, J. S. Kim(Pusan NU), J. D. Lee(Samwoo Engineering LTD.co), W. S. Choi#((Pusan NU) 10:15~10:30 An improved nonlinear dynamics model for multistage gear system with backlash and friction P. Guowei#, C. Wenliang, D. Liping(Nanjing University of Aeronautics and Astronautics, China) 10:30~10:45 Overall evaluation of cutting forces and surface integrity in flank milling of Inconel 718 K. Zhuang#(Huazhong University of Science and Technology, China), D. Zhu(Wuhan University of Technology, China), X. Zhang, H. Ding(Huazhong University of Science and Technology, China) 10:45~11:00 Development of Lightweight Engraving Machine for Customized Shoe Last W. Kai Lu#, S.-L. Chen, J.-C. Wang (National University of Technology, China) 11:00~11:15 Prediction of cutting forces in machining carbon fiber reinforced polymer composites based on a micro-mechanical model B. Niu#, R. Yang(Dalian University of Technology) 11:15~11:30 Structural Optimization and Manufacturing of Shear Probe Sensor for Microstructure Turbulence profiler S. Wang#, X. Jiang, Y. Wang(Tianjin University)

Technical Session [8] Chairman: Prof. Hyung Wook Park(UNIST) Nonconventional Machining Grand Ballroom "B" 13:30~13:45 Electrochemical machining with pulsating electrolyte flow X. l. Fang#, N. s. Qu, Z. Y. Xu (Nanjing University of Aeronautics and Astronautics, China) 13:45~14:00 Enhanced machining efficiency and surface quality by electrochemical discharge drilling using low concentration electrolyte Z.-Y. Xu#, Y. Zhang, D. Zhu (Nanjing University of Aeronautics & Astronautics, China) 14:00~14:15 Fault Detection of Plasma Etchers using Big Data Analysis W. Qin#, J. Yang, J. Zhang(Shanghai Jiao Tong University, China) 14:15~14:30 Observation research of the high-velocity flushing effect on the EDM W. Zhao, F. Zhang, L. Gu(Shanghai Jiao Tong University, China) 14:30~14:45 Simulationand analysis of the flow field for jet-electrodeposition nozzle based on FLUENT L.D. Shen, J. Zhu, Z. J. Tian (Nanjing University of Aeronautics and Astronautics, China) 14:45~15:00 The non-geometry parameters precise manufacturing method for functional components and its application R. Yang, Z. Yan, S. Sun(Dalian University of Technology, China)

❘24❘ ◉ Track 3

Technical Session [3] Chairman: Dr. Chang Ju Kim(KIMM) Micro and Nano MachiningⅠ Mu Goong Hwa Room 10:00~10:15 Characterization of Thin Films deposited at Low Temperature by using Atomic Layer Deposition and E-beam Evaporation J. H. Kim#(KIMM), S. W. Lee(KIMM, Chungnam National Universit), J. S. Yoon, Y. E. Yoo(KIMM, UST) 10:15~10:30 Enhanced Boiling Heat Transfer using GLAD Nanostructure Surfaces M. A. Badshah#, H. J. Jang, J. H. Ju, S. M. Kim(Chung-Ang Univ) 10:30~10:45 Replication and Releasing of the micro structures for injection molding of plastic micro fluidic device Y. E. Yoo#(KIMM), S. W. Woo(KIMM, Seoul NU of Science and Technolog), J. W. Jeong, H. H. Park, J. Y. Kim, S. H. Chang(KIMM), S. K. Kim(Seoul NU of Science and Technolog), Si-Hwan Park(Ulsan College) 10:45~11:00 A Study on the Surface Modification of Anodic Aluminum Oxide Membrane and Its Hydraulic Performance A. Andisetiawan#, N. T. Phuong, J. H. Kim, Y. E. Yoo, D. S. Choi, J. S. Yoon (KIMM, UST) 11:00~11:15 Advances in Medical Needle Technologies - Geometry, Mechanics, Design and Manufacturing Y. Wang, W. Li(University of Michigan, USA), P. Han, M. Giovannini, K. Ehmann(Northwestern University, USA), A. Shih#(University of Michigan, USA) 11:15~11:30 Contact angles on quartz surfaces with micro-machined nanopillars M. T. Hung*, S. C. Chen, S. Yang, S. L. Chen (National Central University, )

Technical Session [9] Chairman: Dr. Seung Kook Ro(KIMM) Precision and Ultra-Precision Machining Mu Goong Hwa Room 13:30~13:45 A friction behavior observation in the high speed optical polishing process H.c. Lee#, K.m. Kim, M.s. Choi(Hanbat NU), C. K. Song(KIMM) 13:45~14:00 A study on the machinability of invar film with different duty factors using pulse electrochemical micro-machining B. Y. Yang#, S. H. Kim, S. G. Choi, W. K. Choi, E. S. Lee(Inha Univ) 14:00~14:15 Characteristic of friction on the USM (ultrasonic machining) texturing bearing steel within density and depth M. J. Shin, S. M. Choi, J. Y. Byun, S.W. Chung, J.m. Park, S.G. Kwon, S. H. Kwon, J. S. Kim, C.W. Kang, A. S. Hermanto, W. S. Choi#(Pusan NU) 14:15~14:30 Scattering super-lens: subwavelength light focusing and imaging via wavefront shaping in complex media J. H. Park(Korea Advanced Institute of Science and Technology), C. H Park, Y. H. Cho(Korea Advanced Institute of Science and Technology, Graduate School of Nanoscience and Technology and KAIST Institute for the NanoCentury), Y. K. Park#(Korea Advanced Institute of Science and Technology) 14:30~14:45 A improved cutting force and stress distribution model of the round edge cutting tool in the ultra precision machining Q. Xiao(Huazhong University of Science and Technology, Chongqing Three Georges University, China), J. Xu#(Huazhong University of Science and Technology, China) 14:45~15:00 Precise Tool Setting Method for CNC Machining Compound Spiral Antenna Based on Binocular Micro Stereo Vision W. Liu#, K. Zhao, P. Gao, L. Wang, L. Ding, J. Ma, Z. Jia (Dalian University of Technology, China)

❘25❘ ◉ Track 4

Technical Session [4] Chairman: Prof. Seong-Wook Hong(Kumoh Nat. Inst. of Tech.) IT-BT Convergence Manufacturing Rose Room / Machine Tool Vibration and System Control 10:00~10:15 A Study on Lens Injection Molding Process Monitoring and Diagnosis Using Internal Sensor Signals J. S. Nam#, C. R. Na, S. W. Lee(Sungkyunkwan Univ) 10:15~10:30 Vibrational Mechanism Analysis of a Cylindrical Double Compound Flexure Design Z. Wang#(Ajou Univ, Shanghai JiaoTong University, China), S. B. Jang, J. S. Kim, M. G. Lee, S. H. Lee, Y. H. Jeon (Ajou Univ) 10:30~10:45 Data Mining for Orders’Lead-Time Forecasting in Wafer Fabrication W. Qin#, J. Wang, J. Zhang(Shanghai Jiao Tong University, China) 10:45~11:00 Development and manufacturing of a surgical simulator based on virtual reality D. Cao#, A. Zhang, X. Chen(Shanghai Jiao Tong University, China) 11:00~11:15 A numerical model predicting the effects of combined noise and vibration on psychological discomfort Y. Huang#, W. Jiang(Shanghai Jiao Tong University, China) 11:15~11:30 Speed Dependent Tool Point Dynamics Prediction By RCSA Y. Chai, Y. Chen, X. Long#(Shanghai Jiao Tong University, China) 11:30~11:45 Analysis of tapered roller bearing characteristics with consideration for thermal effects V. C. Tong#, S. W. Hong(Kumoh National Institute of Technology)

Technical Session [10] Chairman: Prof. Seog-Young Han(Hanyang Univ) CAD/CAM/CAE / Numerical Control and HMI Technologies Rose Room 13:30~13:45 A shape optimization scheme for static stiffness problems Y. H. Kim#, S. Y. Han(Hanyang Univ) 13:45~14:00 Effect of cylinder liner deformation on piston ring lubrication A. Usman#, T. A. Cheema, M. K. Kwak, C. Y. Lee, G. M. Kim, C. W. Park(Kyungpook NU) 14:00~14:15 A statistical approach to locating variation analysis of aircraft fixture board incorporating force analysis H. Sun#, C. Tan, Z. Wang (Nanjing University of Aeronautics and Astronautics, China) 14:15~14:30 Modeling of machining cost of aircraft structural part based on feature C. Zhang#, Y. Li(Nanjing University of Aeronautics and Astronautics University, China), W. Chu(Nanjing University of Aeronautics and Astronautics University, Chengdu Aircraft Industrial (Group) Co., Ltd, China) 14:30~14:45 Optimal adjustment process planning for precision machine tool assembly J. Guo#, Z. Liu, J. Hong, P. Liu(Xi’an Jiaotong University, China) 14:45~15:00 Development of a NC System for Aero-engine Automatic Assembly Vehicle X. j. Sheng#, T. Jiang, J. Wang, H. Gao, R. Yang (Dalian University of Technology, China) 15:00~15:15 Pareto-optimal Set of Part Orientation Based on 3D Printing Techniques O. Lisong#(Nanjing University of Aeronautics and Astronautics, China) 15:15~15:30 Experimental study on effects of backward and forward facing characteristics on the Isolation Plugging Tool H. Zhao#(China University of Petroleum(Beijing), China)

❘26❘ ◉ Track 5

Technical Session [5] Chairman: Prof. Hocheol Lee(Hanbat Nat. Univ.) CAD/CAM/CAE Dong Baek Room 10:00~10:15 A Persistent Naming Method of 3D Surface for Parametric CAD Model Exchanges S. H. Farjana#(KAIST), J. Li(Samsung Electronics), D. Mun(Kyungpook NU), S. H. Han(KAIST) 10:15~10:30 Optimization of the Shape of Optimization of the Shape of a Sealing-Type Abutment by Genetic Algorithm D. S. Hong, J. M. Kim#(Changwon NU) 10:30~10:45 Fluid-Structure Interaction Analysis of Bioprosthetic Heart Valve B. Shen, Q. Yuan#, X. Zhang, X. Zhang(Shandong University, China) 10:45~11:00 Numerical Simulation in Laser Thermal Adjustment of Two-bridge Actuators H. Shen#, J. Hu, Z. Yao(Shanghai Jiao Tong University, China) 11:00~11:15 A Novel Method of Computer-aided Design and Manufacturing of Customized Templates for Pedicle Screw Insertion Y. Yang, D. Cao#(Shanghai Jiao Tong University)

Technical Session [11] Chairman: Dr. Hyunmin Do(KIMM) Robot and Process Automation Ⅰ Dong Baek Room 13:30~13:45 A Piezo-driven Stage with High Stiffness Using Antagonistic Arrangement of Actuating Mechanisms K. B. Choi#, J. J. Lee, G. H. Kim, H. J. Lim(KIMM) 13:45~14:00 A Study on the Linearity Interpolation for Static Characteristics Improvement of a Proportional Control Valve S. N. Yun#, I. S. Park, Y. Tanaka(KIMM) 14:00~14:15 Modeling, simulation and control of 8.5G beam type solar cell substrate handling robot D. I. Park#, C. H. Park, T. Y. Choi, C. H. Park, D. H. Kim(KIMM) 14:15~14:30 Robotic cell manufacturing using two dual-arm robots in cellular phone packaging process H. M. Do#, T. Y. Choi, J. H. Kyung(KIMM) 14:30~14:45 Brain-Computer Interface Controlled Robotic Exoskeleton for Walking Rehabilitation J. Fang, K. Gui#, Y. Ren, Di. Zhang(Shanghai Jiao Tong University, China) 14:45~15:00 A Scheduling Method for Assembly Flow Shop Problem Based on PSO Algorithm H. Wang#, W. Qin(Shanghai Jiao Tong University, China)

❘27❘ ◉ Track 6

Technical Session [6] Chairman: Dr. Kyunghan Kim(KIMM) Robot and Process Automation Ⅱ Geum·Gun Ja Ran Room 10:00~10:15 A Piezo-driven Parallel XY Stage Using Antagonistic Arrangement of Actuating Mechanisms K. B. Choi#, J. J. Lee, G. H. Kim, H. J. Lim(KIMM) 10:15~10:30 A Study on Real-Time Control of Position and Orientation for Mobile Robot by Voice Command Y. M. Koo#, J. S. Yang, M. Y. Park, B. K. Shim, S. H. Han (Kyungnam Univ) 10:30~10:45 Nipkow disk fabrication process for high speed confocal system G. H. Kim#, H. J. Lim, K. B. Choi, J. J. Lee(KIMM), C. K Kim, H.S. Lee(Nanosystem Co., LTD) 10:45~11:00 Synchronization method in the dual robot system T. H. Choi#, H. M. Do, D. I. Park, C. H. Park, J. H. Kyung(KIMM) 11:00~11:15 A measurement-machining integrated manufacturing method of large monolithic thin-walled parts H. B. Liu, Q. L. Bo#, Z. Y. Jia(Dalian University of Technology, China) 11:15~11:30 Assembly-quality Detection System of I-shape Groove FSW F. Wang#(Dalian University of Technology, China)

Technical Session [12] Chairman: Prof. Minsung Hong(Ajou Univ.) Robot and Process Automation Ⅲ Geum·Gun Ja Ran Room 13:30~13:45 Robot Workspace Estimator by Particle Swarm Optimizer for Redundant Manipulator Driven by Flexible Wire Tendons J. W. Lee#, D.h. Kim, H.m. Do, T. H. Choi, D. I. Park(KIMM) 13:45~14:00 Design and simulate of miniature flexure hinge magnification for the piezo-driven film micropump J. Liu#, F. Cao, W. Yan, Z. Fu, Y. Zhao (Shanghai Jiao Tong University, China) 14:00~14:15 Hardware-in-the-loop Simulation Design and Experiment of A Quadrotor Tong Wu#, Xin-Jun Sheng, W. Dong and H. Ding (Shanghai Jiao Tong University, China)

❘28❘ ◉ Food in Jeju

Black Pork Many tourists, on the first time on Jeju, wonder where the best place is to try the island’s delicious black pork. In this situation, if you want a clear reply, the answer would be to “just go anywhere.” Wherever you go on Jeju, you can find delicious black pork restaurants. The meat is even more delicious if you eat it with Mel-jeot, which is a salted anchovy that reduces the pork’s oiliness and makes it tastier.

Horse Cuisine Dishes made using horse were the finest served to the King in times of antiquity. Horse is used in a variety of dishes, including raw horse meat, horse sushi, tangsuyuk (sweet and sour meat), galbijjim (rib stew), gui (roast meat) and bulgogi (sliced and seasoned barbequed meat). Horse meat tastes lighter than beef and each part and organ, such as the liver, has its own unique flavor.

Galchi (hairtail) Cuisine How best to eat Jeju’s chubby and tasty galchi? The first choice is to eat it fresh as hoe (raw fish). Some people think that galchi-hoe has a fishy smell, but that is not true. It is tasty to chew and famous for its aroma. Another delight is boiled galchi in soy sauce and this is also liked by many. It is delicious if you melt raw galchi in your mouth slowly along with rice, or eat boiled galchi spiced with hot Jeju chili powder.

Dom-hoe The most abundant fish on Jeju is the hwang-dom. It is cheap and has an excellent taste but is hard to find on the mainland so don’t miss it while you are on Jeju. If you are looking for a fancier raw fish choice, gat-dom, also known as dol-dom, is also available.

❘29❘ ◉ Accommodations

◈ Jeju KAL Hotel Address 1691-9, Ido 1-dong, Jeju-si, Jeju-do

Phone Number 064-752-2001

Homepage http://www.kalhotel.co.kr

Price Weekday ￦￦110,000 Weekend ￦￦140,000

◈ Jeju Palace Hotel Address 1192-18, Samdoi-dong, Jeju-si, Jeju-do

Phone Number 064-753-8811

Homepage http://www.cjpalace.co.kr

Price Weekday ￦120,000

◈ Ramada Hotel Address 1255, Samdoi-dong, Jeju-si, Jeju-do

Phone Number 064-729-8100

Homepage http://www.ramadajeju.co.kr/

Price Weekday ￦200,000 Weekend ￦260,000

◈ Ocean Suites Jeju Hotel Address 1260-1, Samdoi-dong, Jeju-si, Jeju-do

Phone Number 064-720-6000

Homepage http://www.oceansuites.kr/

Price Weekday ￦170,000 Weekend ￦210,000

❘30❘

Topics and Scope - Advanced Machine tools and Tooling - Precision and Ultra-Precision Machining - Micro and Nano Machining - Nonconventional Machining - Green Manufacturing System - CAD/CAM/CAE - Numerical Control and HMI Technologies - Machine Tool Vibration and System Control - Robot and Process Automation - IT-BT Convergence Manufacturing - Ocean Plant Manufacturing Technologies - Etc.

Korean Core-Research Lab. Remote Tour - Exhibition of Core Laboratories in Korean Universities / Institutes for Global Research Cooperation.

International Forum and Panel Discussion - Future Trends of Global Manufacturing Technologies