Harmony Hills Academy Lab Equipment and Apparatus
Total Page:16
File Type:pdf, Size:1020Kb
Harmony Hills Academy Lab equipment and apparatus specification Harmony Hills Academy General Labware and Safety Equipments 1 Totol cost in S.No Item Description and Specification Quantity U.S$ Bristles on 40cm long wooden handle Head size: 2 LAB 101 Beaker Brushes 65x45x150mm.Bristle, Pack of 10 Burette brush on galvanized steel wire handle. High quality materials used for durability. Bristle, Burette, 610 x 16mm, Pack of 10 2 Bristle, 50ml Burette, 760 x 19mm, Pack of 10 2 LAB 102 Burette Brushes Bristle, 100ml Burette, 915 x 25mm, Pack of 10 2 Brush head widens towards the end, with a slightly fanned tip. 2 Cylinder On galvanized wire handle. Diameter 50-100mm. Suitable for LAB 104 Brushes Erlenmeyer flasks, cylinders and beakers Bristle, Pack of 10 Lab 105 Flask brushes For round bottom flasks up to 100mm dia. On galvanised 2 wire handle. Overall length: 480mm Bristle, Pack of 10 Lab 106 Pipette Brushes Pipette brush. Head size 125 x 10mm. Overall length 2 400mm. For pipettes and tubes from 8-12 mm diameter Bristle, Pack of 10 Lab 107 Test Tube Test tube brush with fanned tip on galvanized steel 2 Brushes wire handle Bristle,11mm, Pack of 10 Bristle,29mm, Pack of 10 LAB 108 Test Tube Test tube brush, head size 50 x 19mm (L x D), on 2 brushes galvanised wire, overall length 230mm. Bristle, Pack of 10 LAB 109 Tapered Test Test tube brush with fluffed cotton yarn tip on galvanised 2 Tube steel wire handle brushes Bristle, Head 24-13mm, Pack of 10 Bristle, Head 35-25mm, Pack of 10 LAB 110 Draining Rack For drying test tubes, PVC coated. 2 LAB 111 Draining Basket Made from polypropylene which is autoclavable. 2 LAB 112 Test Tube This rack is made from polypropylene which is autoclavable. The 3 Baskets rack is non corrosive and makes for easy handling and storage 140 x 120 x 110mm 160 x 160 x 160mm LAB 113 Filter paper Filter paper, general purpose, grade 1, 10 each diameter 12.5 cm, box 100 diameter 11 cm, box 100 Harmony Hills Academy General Labware and Safety Equipments 2 LAB 114 Absorbent Absorbent paper (blotting paper), pack of 10 5 Paper LAB 115 Reel dispenser Reel dispenser for laboratory paper, galvanised, Milaroll or 2 equivalent. LAB 116 Paper roll Paper roll, Milaroll or equivalent, green, 300 mm wide, to suit 5 above LAB Rubber Constructed from high-quality, chemical resistant rubber. 1each Stoppers 117 Stated dimensions are dia.1 x dia. 2 x L, respectively Solid, 9 x 11.5 x 20mm, Pack of 10 Solid, 11 x 14 x 24mm, Pack of 10 Solid, 13 x 16 x 24mm, Pack of 10 Solid, 15 x 18 x 24mm, Pack of 10 Solid, 15 x 18 x 24mm, Pack of 10 Solid, 18 x 21 x 26mm, Pack of 10 Solid, 19 x 22.5 x 28mm, Pack of 10 Solid, 21 x 24.5 x 28mm, Pack of 10 Solid, 23 x 24.5 x 28mm, Pack of 10 Solid, 25 x 28.5 x 28mm, Pack of 10 Solid, 27 x 31 x 32mm, Pack of 10 Solid, 29 x 33 x 32mm, Pack of 10 Solid, 31 x 36 x 35mm, Pack of 10 1 hole, 9 x 11.5 x 20mm, Pack of 10 1 hole, 11 x 14 x 24mm, Pack of 10 1 hole, 13 x 16 x 24mm, Pack of 10 1 hole, 15 x 18 x 24mm, Pack of 10 1 hole, 17 x 20 x 26mm, Pack of 10 1 hole, 18 x 21 x 26mm, Pack of 10 1 hole, 19 x 22.5 x 28mm, Pack of 10 1 hole, 21 x 24.5 x 28mm, Pack of 10 1 hole, 23 x 25.5 x 28mm, Pack of 10 2 holes, 13 x 16 x 24mm, Pack of 10 2 holes, 18 x 21 x 26mm, Pack of 10 2 holes, 21 x 24.5 x 28mm, Pack of 10 2 holes, 23 x 25.5 x 28mm, Pack of 10 2 holes, 25 x 28.5 x 28mm, Pack of 10 LAB 118 Test Paper Test paper reels, pack of 4 dispenser reels; each reel contains a 3 each paper strip 5 m long x 6 mm wide, supply as: 2 reels x pH 1-14 1 reel as Litmus blue 1 reel as Litmus red Cobalt Chloride Litmus Neutral Universal Indicator, pH1-11 Universal Indicator, pH1-11 LAB 119 pH Indicator Indicator paper supplied in plastic dispenser containing 5metres 5 Dispenser of 8mm wide test strip. A colour chart is provided on the side of the dispenser. Lab 120 Test Strips Protein, Pack of 50 2 each Harmony Hills Academy General Labware and Safety Equipments 3 Glucose, Pack of 50 Lab 121 Digital pH A robust, inexpensive, hand held pocket LCD pH meter 8 Meter with 0.01 resolution and standard combination electrode with screw fit. Ideal for laboratory use or where a quick and easy reading is required. Range: 0 to 14 pH Resolution: 0.01 pH Accuracy: ± 0.2 pH Calibration: Manual two point Operating temp.: 0 to 50ºc Dimensions: (incl. electrode) 180 x 50 x 25mm LAB 122 Pocket pH A lightweight, splash proof, pocket size tester. Ideal for 8 Meter pH spot reading precise to 0.1 pH with large easy to read LCD display. Supplied in case with 3 x 1.5V alkaline batteries. Battery life 700 hours approx. Range: 0.0 to 14.0 pH Resolution: 0.01pH Environment: 0 to 50ºC Accuracy: ± 0.1 pH Mass: 85g Dimensions: 150 x 30 x 24mm LAB 123 Tubing Tubing connectors, polypropylene, packs of 10, 2 each connectors straight, for tubing bore 7-9 mm T-shape, for tubing bore7-9 mm Y-shape for tubing bore 7-9 mm LAB 124 Tubing cutter Tubing cutter, for normal wall plastic and rubber tubing, up to 2 19 mm o.d.,with spring loaded hardened steel blade.with spare blade LAB 125 Bench Lamp Bench lamp, angle-poise, switch on shade, base weighted for 10 stability, max 60 W bulb, stand finished in enamel, inside of shade finished in white gloss, maximum working height 750 mm, complete with 2 m,2-core mains cable. LAB 126 Chopping Chopping board, hardwood, kitchen type 2 board LAB 127 Hoffman clip Nickel-plated brass clip with projecting plate to prevent 10 damage to tubing by end of screw. With hinged bottom bar for direct fitting and removal without access to ends of tube. LAB 128 Knife Knife, glass cutting with replaceable blades 2 LAB 129 Glass Tubing With diamond scribing point on spring arm and aluminium Harmony Hills Academy General Labware and Safety Equipments 4 Cutter alloy body with 'V' groove. Suitable for use with soda and borosilicate glass tubing. LAB 130 Diamond Glass For cutting of sheets of glass up to 3 mm thick. Mounted 2 Cutter in brass with wooden handle. Overall length 17.5 cm. LAB 131 SCISSORS Scissors, general purpose, stainless steel, moulded plastic 4 handles, 200mm long Scissors, heavy duty, scalloped blades, mix of left and right hand grips LAB 132 MORTAR AND Mortar and Pestle, unglazed inside, external diameter 8 each PESTLE 50ml, 80mm dia. 150ml, 90mm dia. 175ml, 100mm dia 300ml, 130mm dia 500ml, 150mm dia. LAB 133 MOHR CLIP Mohr clip, overall length 50 mm. Good quality, nickel-plated 8 brass clips. LAB 134 SPATULA Chattaway Spatula(Chattaway type; one end flat and the 1 each other end cantedup. 150mm Polished finish. Packs of 10.) Chattaway Spatula(Chattaway type; one end flat and the other end canted up. 200mmPolished finish. Packs of 10. Spoon End Spatula(Well finished and polished stainless steel spatula, with one end flat and the other end spoon form.,150mm, Packs of 10.) Spoon End Spatula(Well finished and polished stainless steel spatula, with one end flat and the other end spoon form.,200mm, Packs of 10.) Spoon End Spatula(Well finished and polished stainless steel spatula, with one end flat and the other end spoon form.,300mm, Packs of 10.) Nuffield Spatula (Nuffield pattern spatula. Pack of 10.) Trulla Spatula (Trulla spatula, stainless steel, double ended with trowelshaped scoops for handling large quantities of material.Width: 15mm.pack of 10) Polypropylene Spatula Polypropylene spatula with a spoon on one end and aflat, knife-edged face on the other end. 150 mm pack of 10 Polypropylene Spatula Polypropylene spatula with a spoon on one end and aflat, knife-edged face on the other end. 200 mm pack of 10 Palette Knife Spatula Flexible blade & parallel sides set in Harmony Hills Academy General Labware and Safety Equipments 5 wooden handle.155mm LAB 135 WASH BOTTLE Resilient, translucent polyethylene narrow-mouth wash bottles. 4 each Material thickness designed for easy handling when squeezing. The cap is fitted with a flexible polyethylene delivery tube with nozzle, which can be aimed wherever required, and the nozzle has a removable cap. 125ml, Pack of 10 250ml, Pack of 10 500ml, Pack of 10 1000ml, Pack of 10 LAB 136 BUNSEN Bunsen burner, heavy diecast base, integral inlet tube for 8 mm 10 BURNER bore flexible gas tubing, base finished in chemical resistant acrylic paint. Suitable for use with LPG or natural gas, as required by the school. Overall height 124 mm, o.d. of burner tube 13 mm, with rotatable air regulator. LAB 137 TUBING Tubing, bunsen burners, reinforced ends, length 600mm High 50meter BUNSEN quality tubing for secure connection of Bunsen burners to gas BURNER taps. Silicon rubber, with reinforced ends.