Appendix IV L&E
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Laboratory Supplies and Equipment
Laboratory Supplies and Equipment Beakers: 9 - 12 • Beakers with Handles • Printed Square Ratio Beakers • Griffin Style Molded Beakers • Tapered PP, PMP & PTFE Beakers • Heatable PTFE Beakers Bottles: 17 - 32 • Plastic Laboratory Bottles • Rectangular & Square Bottles Heatable PTFE Beakers Page 12 • Tamper Evident Plastic Bottles • Concertina Collapsible Bottle • Plastic Dispensing Bottles NEW Straight-Side Containers • Plastic Wash Bottles PETE with White PP Closures • PTFE Bottle Pourers Page 39 Containers: 38 - 42 • Screw Cap Plastic Jars & Containers • Snap Cap Plastic Jars & Containers • Hinged Lid Plastic Containers • Dispensing Plastic Containers • Graduated Plastic Containers • Disposable Plastic Containers Cylinders: 45 - 48 • Clear Plastic Cylinder, PMP • Translucent Plastic Cylinder, PP • Short Form Plastic Cylinder, PP • Four Liter Plastic Cylinder, PP NEW Polycarbonate Graduated Bottles with PP Closures Page 21 • Certified Plastic Cylinder, PMP • Hydrometer Jar, PP • Conical Shape Plastic Cylinder, PP Disposal Boxes: 54 - 55 • Bio-bin Waste Disposal Containers • Glass Disposal Boxes • Burn-upTM Bins • Plastic Recycling Boxes • Non-Hazardous Disposal Boxes Printed Cylinders Page 47 Drying Racks: 55 - 56 • Kartell Plastic Drying Rack, High Impact PS • Dynalon Mega-Peg Plastic Drying Rack • Azlon Epoxy Coated Drying Rack • Plastic Draining Baskets • Custom Size Drying Racks Available Burn-upTM Bins Page 54 Dynalon® Labware Table of Contents and Introduction ® Dynalon Labware, a leading wholesaler of plastic lab supplies throughout -
Customer Information Regarding Material Resistance in Compressed Air Preparation
Customer information regarding material resistance in compressed air preparation Polycarbonate reservoirs for filter regulators, filters, and lubricators Everywhere the presence of these media cannot be avoided, such as in paint booths, gluing machines, Polycarbonate is the longest known and most vulcanization plants, etc., the use of metal reservoirs processed material in the world for reservoirs of is required. compressed air maintenance units. The high Problematic is the use of solvents not only in pressure and temperature resistances, as well as immediate contact with the reservoir, but also in its good compatibility with the normally used media immediate vicinity. For example, trichlorethylene such as water, oils and greases are some of its vapors from the compressor’s intake air can cause advantages. crack formation in the polycarbonate reservoir. Only The only “weakness” of this plastic is its clean the reservoirs using a slightly damp cloth. Only susceptibility to media that can be referred to use water to do this and, if necessary, a mild collectively using the term “solvents”. From this detergent without chemical additives. range, the materials relevant to the use of If a lubricator is used, please only use suitable compressed air preparation units are summarized pneumatic oils, e.g. AVENTICS pneumatic oil, order here: no. 8982000010 – 1L. Detergents : Trichloroethylene, (usually from outside) perchloroethylene, In most cases, the use of (pneumatic) oils with benzene, additives, for example antifreeze, results in damage super/regular gasoline to or destruction of the reservoirs and must thus be avoided. Alternatively, we recommend the use of Solvents : Acetone, metal reservoirs. (from outside/inside) paint thinners, alcohols, esters Polycarbonate can react to permanent UV-light irradiation and weathering. -
The Chiba System 千葉方式 : a Non Toxic Alternative to the Dichromate
The Chiba System 千葉方式 A Non Toxic Alternative to the Dichromate Processes January 2007 Halvor Bjoerngaard Graduate School of Science and Technology CHIBA UNIVERSITY (千葉大学学位申請論文) The Chiba System 千葉方式 : A Non Toxic Alternative to the Dichromate Processes or The Production of Photographic Prints in Permanent Pigments by Utilising the Sensitivity of the Ferric Salt to the Spectre and Employing the Polymerization of Colloids. 2007年1月 千葉大学大学院自然科学研究科 情報科学専攻画像科学 Halvor Bjørngård Abstract This study has the main purpose of presenting a non-toxic, or an alternative, printing system for the dichromate based pigment processes. The two methods presented in depth are modelled on first Carbon printing then Gum Printing. Achieving non-toxicity for these systems means replacing the dichromate sensitizer and secondly to avoid the practise of hardening the substrate. An alternative sensitizer is presented and hardening is avoided by using modified working methods. The chemistry utilised for this purpose is iron based, red-ox induced, free radical polymerization. The sensitizer is ammonium ferric citrate, using either hydrogen peroxide or ammonium persulphate as developer. For Carbon Printing a solution to both the need for hardeners and the problem of oxygen inhibition, which is usual for this kind of polymerisation, is achieved. This is done by using a covering layer of agar-agar that blocks oxygen and changes the transfer system, obsolescing the use of hardeners. For Gum Printing two methods are presented. One is based on gelatine, which allows the use of a hydrogen peroxide bath for development. The second method is with gum arabicum, which necessitates inclusion of ammonium persulphate in the coating as a developing agent. -
Prohibited and Restricted Chemical List
School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List PROHIBITED AND RESTRICTED CHEMICAL LIST Introduction After incidents of laboratory chemical contamination at several schools, DCPS, The American Association for the Advancement of Science (AAAS) and DC Fire and Emergency Management Services developed an aggressive program for chemical control to eliminate student and staff exposure to potential hazardous chemicals. Based upon this program, all principals are required to conduct a complete yearly inventory of all chemicals located at each school building to identify for the removal and disposal of any prohibited/banned chemicals. Prohibited chemicals are those that pose an inherent, immediate, and potentially life- threatening risk, injury, or impairment due to toxicity or other chemical properties to students, staff, or other occupants of the school. These chemicals are prohibited from use and/or storage at the school, and the school is prohibited from purchasing or accepting donations of such chemicals. Restricted chemicals are chemicals that are restricted by use and/or quantities. If restricted chemicals are present at the school, each storage location must be addressed in the school's written emergency plan. Also, plan maps must clearly denote the storage locations of these chemicals. Restricted chemicals—demonstration use only are a subclass in the Restricted chemicals list that are limited to instructor demonstration. Students may not participate in handling or preparation of restricted chemicals as part of a demonstration. If Restricted chemicals—demonstration use only are present at the school, each storage location must be addressed in the school's written emergency plan. Section 7: Appendices – October 2009 37 School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List Following is a table of chemicals that are Prohibited—banned, Restricted—academic curriculum use, and Restricted—demonstration use only. -
WHEATON Media Bottles
> 1 Proven Tools™ for Scientific Research Mission Contact Info WHEATON is a First-Tier Best In Class Global Supplier, a highly effective > USA & Canada ...................................... 800.225.1437 marketer and a product / service innovator serving the general laboratory, life science and diagnostics packaging segments. > International ......................................... 856.825.1100 > Worldwide Fax ...................................... 856.825.1368 Our Life’s work is founded in our unrelenting passion for Customer Satisfaction and Performance Improvement making us incredibly easy to do business with. > Website ..........................................www.wheaton.com Our Associates take pride in our product, our workplace and in performance. > Street ...................................... 1501 North 10th Street Please contact us and our friendly associates will be glad to assist you. > City / State / Zip.....................Millville, NJ 08332-2038 > Country ................................................................USA > Hours ................................ 8:00 a.m. to 5:00 p.m. EST Stephen R. Drozdow President, Chief Executive Officer > 2 Table of Contents Cell Culture Adherent Culture > Incubators * .....................................................................52 > Roller Apparatus * ............................................................51 > Roller Bottles ...................................................................51 > Vented Caps ....................................................................51 -
2021 Product Guide
2021 PRODUCT GUIDE | LIQUID HANDLING | PURIFICATION | EXTRACTION | SERVICES TABLE OF CONTENTS 2 | ABOUT GILSON 56 | FRACTION COLLECTORS 4 | COVID-19 Solutions 56 | Fraction Collector FC 203B 6 | Service Experts Ready to Help 57 | Fraction Collector FC 204 7 | Services & Support 8 | OEM Capabilities 58 | AUTOMATED LIQUID HANDLERS 58 | Liquid Handler Overview/selection Guide 10 | LIQUID HANDLING 59 | GX-271 Liquid Handler 11 | Pipette Selection Guide 12 | Pipette Families 60 | PUMPS 14 | TRACKMAN® Connected 60 | Pumps Overview/Selection Guide 16 | PIPETMAN® M Connected 61 | VERITY® 3011 18 | PIPETMAN® M 62 | Sample Loading System/Selection Guide 20 | PIPETMAN® L 63 | VERITY® 4120 22 | PIPETMAN® G 64 | DETECTORS 24 | PIPETMAN® Classic 26 | PIPETMAN® Fixed Models 66 | PURIFICATION 28 | Pipette Accessories 67 | VERITY® CPC Lab 30 | PIPETMAN® DIAMOND Tips 68 | VERITY® CPC Process 34 | PIPETMAN® EXPERT Tips 70 | LC Purification Systems 36 | MICROMAN® E 71 | Gilson Glider Software 38 | DISTRIMAN® 72 | VERITY® Oligonucleotide Purification System 39 | REPET-TIPS 74 | Accessories Overview/Selection Guide 40 | MACROMAN® 75 | Racks 41 | Serological Pipettes 43 | PLATEMASTER® 76 | GEL PERMEATION 44 | PIPETMAX® CHROMATOGRAPHY (GPC) 76 | GPC Overview/Selection Guide 46 | BENCHTOP INSTRUMENTS 77 | VERITY® GPC Cleanup System 46 | Safe Aspiration Station & Kit 47 | DISPENSMAN® 78 | EXTRACTION 48 | TRACKMAN® 78 | Automated Extraction Overview/ 49 | Digital Dry Bath Series Selection Guide 49 | Roto-Mini Plus 80 | ASPEC® 274 System 50 | Mini Vortex Mixer 81 | ASPEC® PPM 50 | Vortex Mixer 82 | ASPEC® SPE Cartridges 51 | Digital Mini Incubator 84 | Gilson SupaTop™ Syringe Filters 86 | EXTRACTMAN® 52 | CENTRIFUGES 52 | CENTRY™ 103 Minicentrifuge 88 | SOFTWARE 53 | CENTRY™ 117 Microcentrifuge 88 | Software Selection Guide 53 | CENTRY™ 101 Plate Centrifuge 54 | PERISTALTIC PUMP 54 | MINIPULS® 3 Pump & MINIPULS Tubing SHOP ONLINE WWW.GILSON.COM 1 ABOUT US Gilson is a family-owned global manufacturer of sample management and purification solutions for the life sciences industry. -
SUMMARY of PARTICULARLY HAZARDOUS SUBSTANCES (By
SUMMARY OF PARTICULARLY HAZARDOUS SUBSTANCES (by alpha) Key: SC -- Select Carcinogens RT -- Reproductive Toxins AT -- Acute Toxins SA -- Readily Absorbed Through the Skin DHS -- Chemicals of Interest Revised: 11/2012 ________________________________________________________ ___________ _ _ _ _ _ _ _ _ _ _ _ ||| | | | CHEMICAL NAME CAS # |SC|RT| AT | SA |DHS| ________________________________________________________ ___________ | _ | _ | _ | _ | __ | | | | | | | 2,4,5-T 000093-76-5 | | x | | x | | ABRIN 001393-62-0 | | | x | | | ACETALDEHYDE 000075-07-0 | x | | | | | ACETAMIDE 000060-35-5 | x | | | | | ACETOHYDROXAMIC ACID 000546-88-3 ||x| | x | | ACETONE CYANOHYDRIN, STABILIZED 000075-86-5 | | | x | | x | ACETYLAMINOFLUORENE,2- 000053-96-3 | x | | | | | ACID MIST, STRONG INORGANIC 000000-00-0 | x | | | | | ACROLEIN 000107-02-8 | | x | x | x | | ACRYLAMIDE 000079-06-1 | x | x | | x | | ACRYLONITRILE 000107-13-1 | x | x | x | x | | ACTINOMYCIN D 000050-76-0 ||x| | x | | ADIPONITRILE 000111-69-3 | | | x | | | ADRIAMYCIN 023214-92-8 | x | | | | | AFLATOXIN B1 001162-65-8 | x | | | | | AFLATOXIN M1 006795-23-9 | x | | | | | AFLATOXINS 001402-68-2 | x | | x | | | ALL-TRANS RETINOIC ACID 000302-79-4 | | x | | x | | ALPRAZOMAN 028981-97-7 | | x | | x | | ALUMINUM PHOSPHIDE 020859-73-8 | | | x | | x | AMANTADINE HYDROCHLORIDE 000665-66-7 | | x | | x | | AMINO-2,4-DIBROMOANTHRAQUINONE 000081-49-2 | x | | | | | AMINO-2-METHYLANTHRAQUINONE, 1- 000082-28-0 | x | | | | | AMINO-3,4-DIMETHYL-3h-IMIDAZO(4,5f)QUINOLINE,2- 077094-11-2 | x | | | | | AMINO-3,8-DIMETHYL-3H-IMIDAZO(4,5-f)QUINOXALINE, -
Alca. 7 15 a 7
Oct. 8, 1957 D. A NEWMAN ETAL 2,808,778 PLANOGRAPHIC PRINTING PLATE Filed Sept. 16, 1953 Alca. 7 15 A 7 A3 11 4. i g sh aii RATIO (FILLER/BINDER) INVENTORs Zougaas -4. Ave wa? , , AZara T. Sc/cotz?auer BY 2,808,778 United States Patent Office Patented Oct. 8, 1957 2 cording to the present invention it is possible to insolubilize the coating throughout without regard to its openness So 2,808,778 that the ratio of filler may be varied at will to give ratios PLANOGRAPHIC PRENTING PLATE best suited to other considerations. The product of this method of insolubilization, i.e., Douglas A. Newman, Glen Cove, and Allan T. Schlotz the method of coagulation of a carboxymethyl cellulose hauer, Locast Valley, N. Y., assignors to Columbia product with mixtures of a copper salt with an iron, alumi Ribbon & Carbon Manufacturing Company, Inc., Glen num or chromium compound, or mixtures of a copper Cove, N.Y., a corporation of New York salt with compounds of two or all of said metals has been Application September 16, 1953, Serial No. 380,446 0 determined as the most successful form of carboxymethyl cellulose deposit known to date insofar as the formation 6 Claims. (C. 101-149.2) of planographic printing surface is concerned. Up until the present invention was made, however, it was necessary to carry on this insolubilization primarily as an after This invention relates to the manufacture of plano 15 treatment applied to the dried soluble layer. The plac graphic printing plates, suitable for use in planographic ing of a self-insolubilizing layer of carboxymethyl cel printing processes in which the surface of a plate. -
Cyanotype Process 15
CYANOTYPE Dusan C. Stulik | Art Kaplan The Atlas of Analytical Signatures of Photographic Processes Atlas of The © 2013 J. Paul Getty Trust. All rights reserved. The Getty Conservation Institute works internationally to advance conservation practice in the visual arts—broadly interpreted to include objects, collections, architecture, and sites. The GCI serves the conservation community through scientific research, education and training, model field projects, and the dissemination of the results of both its own work and the work of others in the field. In all its endeavors, the GCI focuses on the creation and delivery of knowledge that will benefit the professionals and organizations responsible for the conservation of the world’s cultural heritage. The Getty Conservation Institute 1200 Getty Center Drive, Suite 700 Los Angeles, CA 90049-1684 United States Telephone: 310 440-7325 Fax: 310 440-7702 Email: [email protected] www.getty.edu/conservation The Atlas of Analytical Signatures of Photographic Processes is intended for practicing photograph conservators and curators of collections who may need to identify more unusual photographs. The Atlas also aids individuals studying a photographer’s darkroom techniques or changes in these techniques brought on by new or different photographic technologies or by the outside influence of other photographers. For a complete list of photographic processes available as part of the Atlas and for more information on the Getty Conservation Institute’s research on the conservation of photographic materials, visit the GCI’s website at getty.edu/conservation. ISBN number: 978-1-937433-08-6 (online resource) Front cover: Cyanotype photograph, 1909. Photographer unknown. Every effort has been made to contact the copyright holders of the photographs and illustrations in this work to obtain permission to publish. -
Ammonium Dichromate
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 4.3 Revision Date 10/30/2012 Print Date 02/20/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Ammonium dichromate Product Number : 09705 Brand : Fluka Supplier : Sigma-Aldrich 3050 Spruce Street SAINT LOUIS MO 63103 USA Telephone : +1 800-325-5832 Fax : +1 800-325-5052 Emergency Phone # (For : (314) 776-6555 both supplier and manufacturer) Preparation Information : Sigma-Aldrich Corporation Product Safety - Americas Region 1-800-521-8956 2. HAZARDS IDENTIFICATION Emergency Overview OSHA Hazards Oxidizer, Carcinogen, Highly toxic by inhalation, Toxic by ingestion, Harmful by skin absorption., Skin and respiratory sensitizer, Corrosive, Teratogen, Reproductive hazard, Mutagen Target Organs Lungs, Kidney, Liver GHS Classification Oxidizing solids (Category 2) Acute toxicity, Oral (Category 3) Acute toxicity, Inhalation (Category 2) Acute toxicity, Dermal (Category 4) Skin corrosion (Category 1B) Serious eye damage (Category 1) Respiratory sensitization (Category 1) Skin sensitization (Category 1) Germ cell mutagenicity (Category 1B) Carcinogenicity (Category 1B) Reproductive toxicity (Category 1B) Specific target organ toxicity - repeated exposure (Category 1) Acute aquatic toxicity (Category 1) Chronic aquatic toxicity (Category 1) GHS Label elements, including precautionary statements Pictogram Signal word Danger Hazard statement(s) H272 May intensify fire; oxidiser. H301 Toxic if swallowed. Fluka - 09705 Page 1 of 8 H312 Harmful in contact with skin. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H330 Fatal if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H340 May cause genetic defects. H350 May cause cancer. H360 May damage fertility or the unborn child. -
Carcinogens CAS DOT SHHC Sources Number Chemical Name
2010 Right to Know Special Health Hazardous Substance List Substance Common Name Carcinogens CAS DOT SHHC Sources Number Chemical Name 3140 # ACEPHATE 30560-19-1 2783 CA 3 6 8 17 18 PHOSPHORAMIDOTHIOIC ACID, ACETYL-, O,S-DIMETHYL ESTER 0001 # ACETALDEHYDE 75-07-0 1089 CA MU TE F4 1 2 3 4 5 6 7 8 R2 15 17 18 20 21 ACETALDEHYDE 22 2890 # ACETAMIDE 60-35-5 3077 CA 3 6 7 17 18 20 ACETAMIDE 0010 # 2-ACETYLAMINOFLUORENE 53-96-3 CA MU 1 4 5 6 18 20 21 ACETAMIDE, N-9H-FLUOREN-2-YL- 0022 # ACRYLAMIDE 79-06-1 2074 CA R2 1 2 3 4 5 6 7 8 15 17 18 19 20 2-PROPENAMIDE 21 0024 # ACRYLONITRILE 107-13-1 1093 CA TE F3 R2 1 2 3 4 5 6 7 8 14 15 17 18 19 2-PROPENENITRILE 20 21 22 3142 # AF- 2 3688-53-7 CA 7 2-FURANACETAMIDE, .alpha.-[(5-NITRO-2-FURANYL)METHYLENE]- 0029 # AFLATOXINS 1402-68-2 CA MU TE 5 7 AFLATOXINS 0033 # ALDRIN 309-00-2 2761 CA TE 1 2 3 4 6 7 8 14 17 18 19 20 21 1,4:5,8-DIMETHANONAPHTHALENE, 1,2,3,4,10,10-HEXACHLORO-1,4,4a,5,8,8aHEXAHYDRO(1R,4S,4aS,5S,8R,8aR)-rel- Page 1 of 55 2010 Right to Know Special Health Hazardous Substance List Substance Common Name Carcinogens CAS DOT SHHC Sources Number Chemical Name 0039 # ALLYL CHLORIDE 107-05-1 1100 CA F3 1 2 3 4 6 7 8 15 17 18 20 1-PROPENE, 3-CHLORO- 0069 # 2-AMINOANTHRAQUINONE 117-79-3 CA MU 5 6 7 18 9,10-ANTHRACENEDIONE, 2-AMINO- 4012 # 1-AMINO-2,4-DIBROMOANTHRAQUINONE 81-49-2 CA 5 9,10-ANTHRACENEDIONE, 1-AMINO-2,4-DIBROMO- 0072 # 4-AMINODIPHENYL 92-67-1 CA MU 1 2 4 5 6 7 18 20 [1,1'-BIPHENYL]-4-AMINE 0076 # 1-AMINO-2-METHYLANTHRAQUINONE 82-28-0 CA 5 6 7 18 9,10-ANTHRACENEDIONE, 1-AMINO-2-METHYL- -
Ajax Finechem Product Catalogue 3510 585 6
ACE AJAX FINECHEM PRODUCT CATALOGUE 3510 ACETONE, HPLC GRADE, BURDICK & JACKSON, CAT. AH010 Assay ……………………………………………………….. 99.9% min. Maximum limit of impurities (%) Water ……………………………………………………….. 0.5 Residue ……………………………………………………… 3mg/L Max. UV. Absorbance: λ(nm) 330 340 350 375 400 Absorbance 1.000 0.080 0.010 0.005 0.005 Pack Size: 4L 585 ACETONE, SPECTROSOL Description: clear liquid; characteristic odour. For U.V. spectroscopy. Assay (by GLC) ……………………………………………….. 99.5% min. Colour (APHA) …………………………………............ 10 max. Density (@ 25°C ) ……………………………………… 0.7857g/mL max. U.V absorbance λ(nm) 330 340 350 400 Max abs. 1.00 0.1 0.02 0.01 Maximum limit of impurities (%) R.A.E. ……………………………………………………….. 0.001 Sol. in H2O ………………………………………………… To pass test Titratable acid …………………………………………… 0.03 mmol H Titratable base ………………………………………….. 0.06 mmol OH Aldehyde (as HCHO) ………………………………….. 0.002 CH3OH ………………………………………………………. 0.05 Propan-2-ol ……………………………………………….. 0.05 Subs. red. KMnO4 (as O) …………………………….. 0.0005 H2O ………………………………………………………….. 0.5 Conforms to ACS Pack Size: 500mL 6 ACETONE, UNIVAR Description: clear liquid with a characteristic odour. Assay( by GLC) ………………………………………….. 99.5% min. Colour (APHA) …………………………………………… 10 max. Density (@ 25oC) ……………………………….......... 0.7857g/mL max. Maximum limit of impurities (%) R.A.E. ……………………………………………………….. 0.001 Cd …………………………………………………. 0.000005 Sol. in H2O …………………………………………………. To pass test Pb ………………………………………………….. 0.000005 Titratable acid ……………………………………………. 0.03 mmol H Ca………………………………………………….. 0.00005 Titratable base …………………………………………… 0.06 mmol OH Zn ………………………………………………….. 0.00005 Aldehyde (as HCHO) …………………………………… 0.002 Na …………………………………………………. 0.00005 Methanol, Propan-2-ol (each) ………………………. 0.05 K …………………………………………………….. 0.00005 Fe …………………………………………………………….. 0.00002 Cr…………………………………………………… 0.000002 Subs. red. KMnO4`……………………………………….. To pass test Co ………………………………………………….. 0.000002 H2O …………………………………………………………… 0.5 Cu ………………………………………………….. 0.000002 Al ……………………………………………………………… 0.00001 Mn ………………………………………………….