DOCSLIB.ORG

Shielding Gas. Gases for Welding Non-Ferrous Materials

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Shielding Gas. Gases for Welding Non-Ferrous Materials → Product Brochure Shielding gas. Gases for welding non-ferrous materials. 03 There is a wide range of aluminium, copper and titanium alloys used in a variety of industries such as in the aerospace, automotive, power generation and petro- chemical sector. These non-ferrous alloys can exhibit a wide range of mechanical, electrical and corrosion resistant properties, depending on the alloy system. However, they all have one property in common – they oxidise very easily during welding and are sensitive to moisture and impurity pick up by the weld. They are therefore not as easy to weld as the steel alloys and good welding technique/procedures, together with good housekeeping and cleanliness in and around the welding area, are essential in order to weld these materials successfully. VARIGON® is a registered trademark of The Linde Group. 04 Improved performance for MIG and TIG welding Improved performance for MIG and TIG welding. Both MIG and TIG welding are widely used for welding non-ferrous The choice of shielding gas for welding these materials is simple – alloys. The choice of process is similar to that for other alloys – only the inert gases are suitable. Consequently, the most common MIG for high productivity and TIG for high precision welding. gas mixtures for both MIG and TIG welding of aluminium, copper and titanium alloys are pure argon, pure helium and mixtures of the two. Titanium is also very sensitive to oxygen and nitrogen and may even require special low impurity products, especially for high quality applications. Small additions, usually less than 0.05 %, of oxidising gases have been shown to be beneficial additions to argon or argon and helium mixtures for welding aluminium. However, these are specialised applications and require welding engineering assessments to be carried out to ensure their suitability. Improved performance for MIG and TIG welding 05 VARIGON He30 06 The right gases for aluminium, copper and titanium alloys The right gases for aluminium, copper and titanium alloys. Gases for non-ferrous materials Thickness Thickness Welding Spatter Porosity range for range for speed control control Fusion Penetration Ease of use MIG (mm) TIG (mm) Argon 4.6 1 to 4 0 to 3 VARIGON He30 1 to 6 1 to 6 VARIGON He50 3 to 10 3 to 9 VARIGON He70 6 to 12+ 6 to 12+ The greater the number of dots, the better the gas performs. Argon 4.6 VARIGON He30 Argon is only suited for welding thin sections as it does not produce The addition of 30 % helium to argon improves the fluidity of the weld a very fluid weld pool. When used for MIG welding, it can give welds pool, whether the mixture is used for MIG and TIG welding. This mixture with high levels of reinforcement, as well as poor fusion and porosity is best suited for welding thin to medium section thicknesses either when welding thicker sections. If reinforcement levels are high, this manually or automatically. can increase stresses within the weld area, so it may be necessary to reduce these by machining. This adds another manufacturing process Fusion and penetration profiles are improved over pure argon, as are its increasing component costs. gap bridging capabilities, reducing the chances of burn through. The addition of helium also helps to lower the levels of porosity, reducing Poor fusion and penetration can also increase defect levels, especially defect rates. Which in turn helps to reduce the defect rates, lowering as the material thick ness increases. Porosity can also be a problem production costs and scrapping rates. when using argon caused by the fast freezing weld pool. All these problems increase costs through additional processes such as weld Preheating will still be required for welding most thicknesses of copper, repair or through the component having to be scrapped. but temperatures will be lower than for argon. This will save both the cost of the preheating medium and the time taken to reach the required When MIG or TIG welding copper, some level of preheating is normally temperature. required and as the thickness of the material increases, so does the preheat temperature required. Again this additional process and the length of time required to preheat adds cost into the component being manufactured. The right gases for aluminium, copper and titanium alloys 07 VARIGON He50 VARIGON He50 VARIGON He70 An addition of 50 % helium to this mixture produces a more fluid This 70 % helium and argon mixture is most commonly used for weld pool than with VARIGON He30 and so tends to be used on automatic MIG and TIG welding. It produces a very fluid weld pool thicker components. It can be used for both MIG and TIG welding, with excellent fusion and penetration and is ideal for welding very either manually or on automatic welding equipment. thick aluminium sections and copper. The fusion and penetration characteristics are significantly improved The fluid weld pool allows a significant increase in welding speed to over argon and much lower defect rates are achieved. Reinforcement be achieved over argon. The fusion characteristics and penetration levels are also much lower as the weld flows much easier giving flatter profile are improved and this reduces the defect level minimising the weld profiles. Welding speeds can also be improved while maintaining number of rejected components, increasing productivity and efficiency the weld quality. All the features improve productivity while reducing while reducing overall production costs. production costs. Even smaller weld preparations can often be used than with The high energy available means that little or no preheating is VARIGON He50, giving a further economic advantage when using required when welding thicker aluminium sections or thinner copper this shielding gas. sections. In some cases the weld preparation can be reduced in size. This enables a con siderable cost saving as the cost to manufacture the weld preparation, the cost in wire and time to re-weld the joint are all reduced or eliminated. Getting ahead through innovation. With its innovative concepts, Linde is playing a pioneering role in the global market. As a technology leader, it is our task to constantly raise the bar. Traditionally driven by entrepreneurship, we are working steadily on new high-quality products and innovative processes. Linde offers more. We create added value, clearly discernible competitive advantages, and greater profitability. Each concept is tailored specifically to meet our customers’ requirements – offering standardised as well as customised solutions. This applies to all industries and all companies regardless of their size. If you want to keep pace with tomorrow’s competition, you need a partner by your side for whom top quality, process optimisation, and enhanced productivity are part of daily business. However, we define partnership not merely as being there for you but being with you. After all, joint activities form the core of commercial success. Linde – ideas become solutions. Linde AG Gases Division, Seitnerstrasse 70, 82049 Pullach, Germany Phone +49.89.7446-0, Fax +49.89.7446-1216, www.linde-gas.com .
Load more

Recommended publications
  • MTI Friction Welding Technology Brochure
    Friction Welding Manufacturing Technology, Inc. All of us at MTI… would like to extend our thanks for your interest in our company. Manufacturing Technology, Inc. has been a leading manufacturer of inertia, direct drive and hybrid friction welders since 1976. We hope that the following pages will further spark your interest by detailing a number of our products, services and capabilities. We at MTI share a common goal…to help you solve your manufacturing problems in the most Table of Contents efficient way possible. Combining friction welding Introduction to Friction Welding 2 with custom designed automation, we have Advantages of MTI’s Process 3 demonstrated dramatic savings in labor and Inertia Friction Welding 4 material with no sacrifice to quality. Contact us Direct Drive & Hybrid Friction Welding 5 today to find out what we can do for you. Machine Monitors & Controllers 6 Safety Features 7 Flash Removal 7 MTI Welding Services 8 Weldable Combinations 9 Applications Aircraft/Aerospace 10 Oil Field Pieces 14 Military 16 Bimetallic & Special 20 Agricultural & Trucking 22 Automotive 28 General 38 Special Welders & Automated Machines 46 Machine Models & Capabilities 48 Friction Welding 4 What It Is Friction welding is a solid-state joining process that produces coalescence in materials, using the heat developed between surfaces through a combination of mechanically induced rubbing motion and Information applied load. The resulting joint is of forged quality. Under normal conditions, the faying surfaces do not melt. Filler metal, flux and shielding gas are not required with this process. Dissimilar Materials Even metal combinations not normally considered compatible can be joined by friction welding, such as aluminum to steel, copper to aluminum, titanium to copper and nickel alloys to steel.
    [Show full text]
  • Guidelines for the Welded Fabrication of Nickel-Containing Stainless Steels for Corrosion Resistant Services
    NiDl Nickel Development Institute Guidelines for the welded fabrication of nickel-containing stainless steels for corrosion resistant services A Nickel Development Institute Reference Book, Series No 11 007 Table of Contents Introduction ........................................................................................................ i PART I – For the welder ...................................................................................... 1 Physical properties of austenitic steels .......................................................... 2 Factors affecting corrosion resistance of stainless steel welds ....................... 2 Full penetration welds .............................................................................. 2 Seal welding crevices .............................................................................. 2 Embedded iron ........................................................................................ 2 Avoid surface oxides from welding ........................................................... 3 Other welding related defects ................................................................... 3 Welding qualifications ................................................................................... 3 Welder training ............................................................................................. 4 Preparation for welding ................................................................................. 4 Cutting and joint preparation ...................................................................
    [Show full text]
  • Welding and Joining Guidelines
    Welding and Joining Guidelines The HASTELLOY® and HAYNES® alloys are known for their good weldability, which is defined as the ability of a material to be welded and to perform satisfactorily in the imposed service environment. The service performance of the welded component should be given the utmost importance when determining a suitable weld process or procedure. If proper welding techniques and procedures are followed, high-quality welds can be produced with conventional arc welding processes. However, please be aware of the proper techniques for welding these types of alloys and the differences compared to the more common carbon and stainless steels. The following information should provide a basis for properly welding the HASTELLOY® and HAYNES® alloys. For further information, please consult the references listed throughout each section. It is also important to review any alloy- specific welding considerations prior to determining a suitable welding procedure. The most common welding processes used to weld the HASTELLOY® and HAYNES® alloys are the gas tungsten arc welding (GTAW / “TIG”), gas metal arc welding (GMAW / “MIG”), and shielded metal arc welding (SMAW / “Stick”) processes. In addition to these common arc welding processes, other welding processes such plasma arc welding (PAW), resistance spot welding (RSW), laser beam welding (LBW), and electron beam welding (EBW) are used. Submerged arc welding (SAW) is generally discouraged as this process is characterized by high heat input to the base metal, which promotes distortion, hot cracking, and precipitation of secondary phases that can be detrimental to material properties and performance. The introduction of flux elements to the weld also makes it difficult to achieve a proper chemical composition in the weld deposit.
    [Show full text]
  • Laser Beams a Novel Tool for Welding: a Review
    IOSR Journal of Applied Physics (IOSR-JAP) e-ISSN: 2278-4861.Volume 8, Issue 6 Ver. III (Nov. - Dec. 2016), PP 08-26 www.iosrjournals.org Laser Beams A Novel Tool for Welding: A Review A Jayanthia,B, Kvenkataramananc, Ksuresh Kumard Aresearch Scholar, SCSVMV University, Kanchipuram, India Bdepartment Of Physics, Jeppiaar Institute Of Technology, Chennai, India Cdepartment Of Physics, SCSVMV University, Kanchipuram, India Ddepartment Of Physics, P.T. Lee CNCET, Kanchipuram, India Abstract: Welding is an important joining process of industrial fabrication and manufacturing. This review article briefs the materials processing and welding by laser beam with its special characteristics nature. Laser augmented welding process offers main atvantages such as autogenous welding, welding of high thickness, dissimilar welding, hybrid laser welding, optical fibre delivery, remote laser welding, eco-friendly, variety of sources and their wide range of applications are highlighted. Significance of Nd: YAG laser welding and pulsed wave over continuous wave pattern on laser material processesare discussed. Influence of operating parameter of the laser beam for the welding process are briefed including optical fibre delivery and shielding gas during laser welding. Some insight gained in the study of optimization techniques of laser welding parameters to achieve good weld bead geometry and mechanical properties. Significance of laser welding on stainless steels and other materials such as Aluminium, Titanium, Magnesium, copper, etc…are discussed. I. INTRODUCTION Welding is the principal industrial process used for joining metals. As materials continue to be highly engineered in terms of metallic and metallurgical continuity, structural integrity and microstructure, hence, welding processes will become more important and more prominent.
    [Show full text]
  • Download Shielding Gas Selector Brochure(PDF 2.0
    3 Product Information Shielding Gas The right gas working for you 02 Contents Contents. 3 Choosing the right gas 6 Welding processes 8 Product range 10 Gases for carbon and low-alloy steels 14 Gases for stainless steels 18 Gases for aluminium, copper and titanium alloys 20 Plasma welding and cutting 21 MIG brazing 22 Purging or root backing 24 Frequently asked questions 26 Health and safety 28 Supply options 30 Services ACCURA®, CORGON®, CRONIGON®, LASGON®, LINDATA®, LIPROTECT®, LISY®tec MISON® SECCURA® and VARIGON® are registered trademarks of the Linde Group. Choosing the right gas 03 Can a shielding gas affect the weld quality? Choosing the right gas. Ar Ar/He The addition of helium to the shielding gas results in a hotter welding arc than that produced from pure argon. Carbon dioxide Argoshield Heavy Argoshield Universal 17.1g 8.6g 8.6g For many people, the sole role of the shielding gas Weld metal properties is to protect the finished weld from the effects of Although the weld metal properties are primarily controlled by the oxygen and nitrogen in the atmosphere. What isn’t composition of the consumable, the shielding gas can influence the widely understood is that selecting the right shielding weld’s strength, ductility, toughness and corrosion resistance. gas for the job can bring many more benefits. Adding oxygen and/or carbon dioxide to a shielding gas for MIG welding carbon steel increases its oxidation potential. In general, for The choice of the shielding gas can affect: a given welding wire, the higher the oxidation potential of a shielding • the weld metal properties, such as strength, corrosion resistance gas, the lower the strength and toughness of the weld.
    [Show full text]
  • MSL Engineering Limited Platinum Blue House 1St Floor, 18 the Avenue Egham, Surrey, TW20 9AB
    SMR Final Report 121404 Purpose of Issue Rev Date of Issue Author Agreed Approved Issued for information 0 Aug 2004 SM Issued for internal comment 1 November 2004 AFD DJM JB Issued as Final Report 2 December 2004 AFD DJM JB This Final report has been reviewed and approved by the Mineral Management Service. Approval does not signify that the contents necessarily reflect the views and policies of the Service, nor does mention of trade names or commercial products constitute endorsement or recommendation for use. This study was funded by the Mineral Management Service, U.S. Department of the Interior, Washington, D.C., under Contract Number 1435-01-04-CT-35320 ASSESSMENT OF REPAIR TECHNIQUES FOR AGEING OR DAMAGED STRUCTURES Project #502 DOC REF C357R001 Rev 1 NOV 2004 MSL Engineering Limited Platinum Blue House 1st Floor, 18 The Avenue Egham, Surrey, TW20 9AB Tel: +44 (0)1784 439194 Fax: +44 (0)1784 439198 E-mail: [email protected] C357R001Rev 2, December 2004 MMS Project #502 NUMBER DETAILS OF REVISION 0 Issued for information, August 2004 1 Issued for comment, November 2004. Extensive revisions throughout, including restructuring of report. 2 Issued as Final Report, December 2004. Conversion table added, Figure showing clamp details to avoid added, and general editorial revisions. C357R001Rev 2, December 2004 MMS Project #502 Assessment of Repair Techniques for Ageing or Damaged Structures By Dr. Adrian F Dier MSL Services Corporation Final Project Report: ASSESSMENT OF REPAIR TECHNIQUES FOR AGEING OR DAMAGED STRUCTURES MMS Project Number 502 November 2004 C357R001Rev 2, December 2004 i This Final report has been reviewed a nd approved by the Mineral Management Service.
    [Show full text]
  • Laser Welding. LASERLINE® Technical
    Laser welding. LASERLINE® Technical. 402935-LASERLINE Technical Laser Welding AW.indd 1 17/08/2009 14:34 02 Contents Introduction 03 Contents. Introduction. 03 Introduction 16 Lasers in surface modification 04 The laser welding process 17 Safety in laser welding Principles of laser welding Laser radiation Weld joint configurations Welding emissions Types of welding processes Gases and gas supply 06 Parameters in laser welding 18 Welding gases for CO2 laser welding Role of the welding gas Tendency to form a plasma 19 Welding gases for Nd:YAG laser welding Mechanical properties Blanketing/shielding effect Gas nozzle devices 19 Bibliography Fig. 1: Examples of laser welding Nozzle positioning Within the last two decades, industrial lasers have advanced from High-power CO2 lasers (2–10 kW) are used in the welding of car bodies, exotic to state-of-the-art technology in many fields of manufacturing. transmission components, heat exchangers and tailored blanks. For 09 Pressure and volume requirements While laser cutting is certainly the most popular application of high- many years, low-power Nd:YAG lasers (< 500 W) have been used to weld for different materials power lasers, other processes such as laser welding and laser surface small components, such as medical instruments, electronic packages modification are also becoming the process of choice in their respective and razor blades. Nd:YAG, disc and fibre lasers with power levels in the Welding gases for mild steels using CO2 lasers industries. multi-kW range benefit from beam delivery via optical fibres. These Welding gases using disc or fibre lasers are easily manipulated by robots, thereby opening a large field of 3D Metallurgical effect Laser welding is increasingly being used in industrial production applications, such as laser cutting and welding of car bodies.
    [Show full text]
  • Shielding Gas. Gases for All Types of Stainless Steel
    → Stainless Steel - New Zealand edition Shielding gas. Gases for all types of stainless steel. Argon 03 Stainless steel is usually defined as an iron-chromium alloy, containing at least 11% chromium. Often containing other elements such as silicon, manganese, nickel, molybdenum, titanium and niobium, it is most widely used as corrosion resistant engineering material in applications where aggressive environments or elevated temperatures are prevalent. Stainless steel is traditionally categorised into four main groups and each group is further sub-divided into specific alloys. The main groups are: austenitic, ferritic, martensitic and duplex. → Austenitic stainless steels are the most widely used, accounting for around 70% of all stainless steels fabricated. They are used in applications such as chemical processing, pharmaceutical manufacturing, food processing and brewing, and liquid gas storage. The weldability of these grades is usually very good. → Ferritic stainless steels are not as corrosion resistant or as weldable as austenitic stainless steels. They have high strength and good high temperature properties and are used for products such as exhausts, catalytic converters, air ducting systems, and storage hoppers. → Martensitic stainless steels are high strength but are more difficult to weld than other types of stainless steels. They are used for products such as vehicle chassis, railway wagons, ­ mineral handling equipment and paper and pulping equipment. → Duplex stainless steels combine the high strength of ferritic steels and the resistance of austenitic steels. They are used in corrosive environments such as offshore and ­ petrochemical plants, where the integrity of the welded material is critical. ARGOSHIELD®, ALUSHIELD® STAINSHIELD® and SPECSHIELD® are registered trademarks of BOC a Member of The Linde Group.
    [Show full text]
  • Welding Innovation Vol. XVI, No.1, 1999
    Tribute to a Leader The James F. Lincoln Arc Welding Foundation was incorporated in 1936 as a nonprofit organization “…to encourage and stimu- late scientific interest in, and scientific study, research and edu- cation in respect of, the development of the arc welding industry…” During Dick's tenure as Executive Director of the Foundation, he enhanced the organization's effectiveness by: • Supporting the School/Shop, College and Professional Award Programs with publicity and cash grants that have made them among the finest such programs in the United States • Expanding the program of donating complete libraries of books Richard S. Sabo published by the Foundation to high schools and colleges • In 1984, initiating publication of Welding Innovation, a periodical which now has an international circulation in excess of 50,000 Some people are simply irreplaceable. My long time friend and • In 1988, appointing the first International Assistant Secretaries colleague, Richard S. Sabo is a case in point. After 31 years of the Foundation with The James F. Lincoln Arc Welding Foundation, and 34 years • Establishing creative partnerships with the American and at The Lincoln Electric Company, Dick is retiring. He will be suc- Australian Institutes of Steel Construction to co-sponsor ceeded, but never replaced. welded bridge award programs For the last three decades, it has been my privilege to watch Dick • Continuing the Foundation's ambitious program of publishing inspire, educate and motivate a truly amazing range of people, welding manuals and design texts from Lincoln employees to vocational school students, from top industry leaders to Foundation Award program participants, and The above accomplishments were very much a part-time activity for from college professors to members of Congressional committees.
    [Show full text]
  • Arc Effect of Hydrogen in an Argon GTAW Shielding
    Effect of Hydrogen in an Argon GTAW Shielding Gas: Arc Characteristics and Bead Morphology Hydrogen content in the shielding gas may have as strong an influence on joint penetration as welding current BY M. ONSOIEN, R. PETERS, D.L. OLSON AND S. LIU ABSTRACT. The influence of hydrogen idation, undercutting, porosity, slag in- rent-carrying capacity of the arc at a additions to an argon shielding gas on the clusions, fusion, and joint penetration given voltage, or arc length (Refs. 5, 6). heat input and weld bead morphology (Refs. 1-4). The actual voltage to main- An addition of hydrogen to argon or was investigated using the gas tungsten tain a stable high-pressure arc is para- helium gives an arc a wider temperature arc welding process. Variations in weld metrically determined by the arc length distribution, a larger heat input and a bead size and shape with hydrogen ad- and welding current level, and is influ- slightly reducing atmosphere (Reg. 2, 7). ditions were related to changes in the enced by the conductivity of the arc. The higher heat input can partially be re- ability of the arc to generate heat and not Charge carrier concentration and the lated to the dissociation of diatomic hy- to generate perturbations in the weld mean free path between electron-parti- drogen in the arc to form atomic hydro- pool caused by Marangoni fluid flow. cle interactions are the two major factors gen, which then recombines to the that determine arc conductivity. A gas molecular form in the cooler regions of the Introduction with low-ionization potential will easily arc and at the surface of the workpiece ionize to form a plasma.
    [Show full text]
  • WT 31 GTAW for Gunsmiths
    Lassen Community College Course Outline WT-31 - GTAW For Gunsmiths 3.0 Units I. Catalog Description This course is designed to develop the manipulative skills, technical knowledge and application of the tungsten arc welding (GTAW) process as they relate to firearm repair. The student will be required to provide their own tungsten welding electrodes for this course at a cost of approximately $30.00. Must be accepted into the gunsmithing program prior to enrollment. This course has been approved for hybrid delivery. Transfers to CSU only 17 Hours Lecture, 102 Hours Lab Scheduled: II. Coding Information Repeatability: Not Repeatable, Take 1 Time Grading Option: Graded or Credit/No Credit Credit Type: Credit - Degree Applicable TOP Code: 095650 III. Course Objectives A. Course Student Learning Outcomes 1. Students will complete ten of the weld joint designs using the Gas Tungsten Arc Welding process (GTAW) on mild steel. 2. Students will complete all four of their Gas Tungsten Arc Welding (GTAW) projects. B. Course Objectives Upon completion of this course the student will be able to: 1. Demonstrate safe handling and use of gas tungsten arc welding (GTAW) equipment. 2. Demonstrate the manipulative skills necessary to weld selected joint designs with the gas tungsten arc welding (GTAW) process which meet critical industry standards. 3. Demonstrate the manipulative skills necessary to fabricate and/or repair selected projects using the gas tungsten arc welding equipment (GTAW). 4. Demonstrate the manipulative skills necessary to perform soft soldering on selected joint designs. 5. Demonstrate safe handling and use of oxyacetylene equipment. 6. Demonstrate the manipulative skills necessary to perform brazing and braze welding.
    [Show full text]
  • GSS 117 Gas Tungsten Arc Welding for Gunsmiths
    Lassen Community College Course Outline GSS-117 Gas Tungsten Arc Welding for Gunsmiths 1.0 Unit I. Catalog Description This course is designed to develop the manipulative skills, technical knowledge and applications of the gas tungsten arc welding (GTAW) process as they relate to firearm repair. Students will apply the gas tungsten arc welding process (GTAW) to selected metal types, joint designs and gun parts. Does Not Transfer to UC/CSU 50 Hours Lab Scheduled: II. Coding Information Repeatability: Take 1 Time Grading Option: Pass/No Pass Only Credit Type: Credit - Not Degree Applicable TOP Code: 095650 III. Course Objectives A. Course Student Learning Outcomes Upon completion of this course the student will be able to: Safely handle equipment to gas tungsten weld selected joint designs to critical industry standards. B. Course Objectives Upon completion of this course the student will be able to: 1. Explain the benefits of GTAW as it pertains to gunsmithing. 2. Identify base metal and prescribe proper fill rod. 3. Demonstrate proper weld beads on various thicknesses of metal. 4. Explain and demonstrate the welding of barrel hoods and firing pin holes. IV. Course Content A. Safety precautions 1. Electrical shock 2. Radiation hazards 3. Compressed gases 4. Air contamination 5. Emergency shop procedures B. GTAW torch setup 1. Torch bodies 2. Collet bodies 3. Collet 4. Ceramic cups 5. Tails/caps 6. Tungsten electrodes C. GTAW power source settings 1. Polarity settings GSS-117 Gas Tungsten Arc Welding for Gunsmiths Page 1 2. Amperage control 3. Post-flow settings 4. High frequency adjustments D.
    [Show full text]