ONE-TOUCH COFFEEHOUSE ! This Appliance Generates Heat During PRODUCT SAFETY 9 Use

Home , Coffeehouse

ONE-TOUCH COFFEEHOUSE ! This appliance generates heat during PRODUCT SAFETY 9 use. Adequate precaution must be taken 18 READ CAREFULLY AND KEEP FOR 12 FUTURE REFERENCE to prevent the risk of burns, scalds, fires or other damage to persons or property This appliance can be used caused by touching the exterior whilst in by children aged from 8 years use or during cooling. 13 and above and persons with ! Never use this appliance for anything 11 reduced physical, sensory other than its intended use. This 1 14 or mental capabilities or appliance is for household use only. Do 2 lack of experience and not use this appliance outdoors. knowledge if they have ! Always ensure that hands are dry before 15 been given supervision or handling the plug or switching on the appliance. instruction concerning use 10 17 ! Always use the appliance on a stable, of the appliance in a safe 3 way and understand the secure, dry and level surface. 19 hazards involved. Children ! This appliance must not be placed on or near any potentially hot surfaces (such 16 shall not play with the as a gas or electric hob). 9 appliance. Cleaning and ! Do not use the appliance if it has been 4 user maintenance shall dropped, if there are any visible signs of 5 9a 9b not be made by children damage or if it is leaking. unless they are older than ! Ensure the appliance is switched off and 6 7c 8 and supervised. Keep the unplugged from the supply socket after 7a 7b 8 9d 9e appliance and its cord out of use and before cleaning. reach of children aged less ! Always switch off, unplug and allow 2a 9c than 8 years. to cool before removing/fitting parts, 9f If the supply cord is damaged, cleaning or storing. it must be replaced by the ! Never immerse the main body of the manufacturer, its service appliance or power cord and plug in 1. Brew Head c. Small and Large Cappuccino Button with water or any other liquid. 2. Porta-Filter: Indicator Lights agent or similarly qualified ! Never let the power cord hang over the a. Porta-Filter for Ground Coffee and E.S.E. d. Small and Large Latte Button with persons in order to avoid a edge of a worktop, touch hot surfaces or pods (45mm) Indicator Lights 3. Height Adjusting Slot for Small Cups e. Manual Milk Frothing Button with Indicator hazard. become knotted, trapped or pinched. 4. Removable Drip Grid Light ! Never leave the appliance unattended 5. Removable Drip Tray f. Clean Button with Indicator Light when in use. 6. Drip Tray Overflow Floater 10. Removable/Clear Milk Reservoir 7. Filters For: 11. Milk Reservoir Lid a. Single Shot of Espresso and E.S.E. pods 12. Milk Reservoir Release Button (45mm) 13. Milk Froth Level Control Knob b. Double Shot of Espresso 14. Milk Frothing Tube Guide Lever c. Detachable Bottom Covers of Filters 15. Frothed Milk Dispensing Tube 8. Measuring Scoop/Tamper 16. On/Off Switch “I/O” 9. Control Panel 17. Removable Water Tank a. Single and Double Espresso Button 18. Water Tank Lid withIndicator Lights 19. Milk Hose b. Manual Espresso Brew Button with Indicator Light

Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.

2 3 INTRODUCTION BEFORE USING YOUR APPLIANCE 3. Select one of the filters (single or SELECTING THE RIGHT COFFEE double espresso) and place it in the Congratulations! You have selected the FOR THE FIRST TIME THE COFFEE ® porta-filter for ground coffee. Place new and innovative Breville One-Touch CLEANING THE UNIT PRIOR TO FIRST the porta-filter in the unit ensuring it is The coffee should be freshly ground CoffeeHouse. This unique appliance USE properly locked and place a large cup and dark roasted. You may want to has been designed to help you prepare Please refer to the “Description of the under it. Also, make sure the tip of the try a French or Italian roast ground for delicious espressos, cappuccinos Appliance” section to familiarise yourself frothed milk dispensing tube is pointing espresso. Pre-ground coffee will only and lattes quickly, conveniently, and retain its flavour for 7 – 8 days, provided with the product and identify all parts. inside the cup. it is stored in an airtight container and automatically with the touch of a button. 4. Plug the appliance into the appropriate 1. Please make sure the unit is off “O” by in a cool, dark area. Do not store in a ESPRESSO pressing the on/off “I/O” switch located outlet. refrigerator or freezer. Whole beans are A unique method of coffee brewing in on the right side of the unit. Make 5. Turn the power button on “I”. recommended to be ground just before which hot water is forced through finely sure it is unplugged from the electrical 6. The 2 control panel lights (Espresso use. Coffee beans stored in an airtight ground coffee. Popular in Europe, it is a outlet. heater “ ” and Steam heater “ ”) container will preserve flavour for up to 4 far richer and more full-bodied brew than 2. Remove stickers and labels from the will start blinking. Once these lights weeks. regular drip coffee. Because of its richness, unit. become solid, press the manual espresso is usually served in 45 to 60 ml 3. REMOVE RED PLUG FROM espresso button THE GRIND (1.5 to 2 oz.) portions, in demitasse cups. THE BOTTOM OF THE WATER “ ”. The water will flow and stop This is a vital step in the espresso making RESERVOIR. automatically. process if you are grinding your own CAPPUCCINO 4. First remove and then wash the water 7. Dispose of water in the cup and place coffee. It may require practice. The coffee A drink made with about 1/3 espresso, 1/3 reservoir, the milk reservoir, the porta- it back in the unit. must be of a fine grind. steamed milk, and 1/3 frothed milk. filter, the two filters and measuring 8. Press the manual froth button “ • The correct grind should look like table LATTE scoop/tamper in a mixture of mild ”. The water will flow and stop salt. A drink made with about 1/4 espresso and detergent and water. Rinse each automatically. • If the grind is too fine, the water will not flow through the coffee even under high 3/4 steamed milk. thoroughly and place them back into 9. The 2 control panel lights (Espresso pressure. These grinds look like powder the unit. Please read ALL of the instructions, heater “ ” and Steam heater “ ”) will and feel like flour when rubbed between cautions, notes and warnings included in 5. Refer to the instructions on “PLACING turn on solid. Now your unit has been fingers. this instruction manual carefully before you THE PORTA-FILTER” section before primed and is ready to be used. • If the grind is too coarse, the water begin to use this appliance. When this unit placing or removing the porta-filter and flows through the coffee too fast, is used, some parts and accessories get any filter from the unit. HOW TO SELECT THE RIGHT CUP preventing a full-flavored extraction. hot and need to cool down. Proper care 6. To clean the inside of the appliance, Please make sure to select your cup Be sure to use a quality grinder for and maintenance will ensure the long life follow the steps listed on the according to the following chart: uniform consistency. of the Breville® One-Touch CoffeeHouse “PREPARING CAPPUCCINO” section SUGGESTED and its trouble-free operation. Save these using water in both reservoirs and BEVERAGE instructions and refer to them often for no ground coffee in the filter. Do not CUP cleaning and care tips. immerse the main body of the appliance Espresso Single ( ) 40ml ® Your Breville One-Touch CoffeeHouse or power cord and plug in water or Double ( ) 80ml can be used with ground coffee as attempt to reach any of its internal parts. well as E.S.E. pods (45 mm), making Cappuccino Small ( ) 230ml IMPORTANT - PRIME THE UNIT it exceptionally practical and versatile Large ( ) 460ml to prepare single shots of espresso, To prime unit, run the steam cycle by following the steps below: Latte Small ( ) 400ml cappuccino and latte. 550ml 1. Fill water reservoir up to the “MAX” Large ( ) line and make sure to place the water NOTE: The total amount of the beverage reservoir tightly back in the unit with its can vary depending on the type of milk and lid closed. level of froth used. 2. Fill the milk reservoir with water up to the MAX level and slide the milk reservoir back in its place. You should feel the milk reservoir lock in place.

4 5 OPERATING INSTRUCTIONS USING THE PORTA-FILTER FOR PLACING THE FILTER ON THE PORTA- FOR GROUND COFFEE: GROUND COFFEE AND E.S.E PODS FILTER FILLING THE WATER RESERVOIR a. Fill the filter with fresh, fine ground CHOOSING THE FILTER 1. Insert the filter into the porta-filter, espresso coffee about 3mm from the a. Fill the water reservoir with water (see rim (DO NOT overfill). figure 1). You may use either a pitcher Select the filter to be used as follows: making sure to align the filter dimple to a. FOR A SINGLE SHOT – use the filter the porta-filter notch (see figure 4). b. Using the tamping part of the scoop, to fill it up or remove it from the unit push the coffee grounds downwards and then fill it up under the tap. Fill for a single shot of espresso if using 2. Turn the filter to the left or right to lock it as far as the tamper will go to get your the reservoir with the desired amount ground coffee, or if using E.S.E. (Easy in place (see figure 5). espresso grounds compact and even. of water below the “MAX” level on Serving Espresso) pods. Figure 4 Figure 5 c. Clean any excess coffee from the rim the reservoir. Never use warm or hot to ensure proper fit under brew head. water to fill the water reservoir.

Figure 1 a. b.

POD

NOTE: To remove the filter for cleaning, turn the filter to the left or right to align the b. Close the water reservoir lid. If you filter dimple to the porta-filter notch and removed it from the unit to fill up with b. FOR A DOUBLE SHOT OR TWO proceed to remove. c. water, please make sure to place it SINGLE SHOTS – use the filter for a back tightly in its place. WARNING: Make sure the filter has double shot of espresso. By placing cooled down before attempting to remove FILLING THE MILK RESERVOIR two small cups underneath the porta- it from the porta-filter. filter, you may prepare two single If you plan to prepare a cappuccino or shots of espresso at once. FILLING WITH COFFEE latte, remove the milk reservoir from the Place selected filter in porta-filter as unit by lifting up on the milk reservoir follows: release button, simultaneously sliding milk reservoir out (see figure 2). Then, pour the FOR E.S.E. (EASY SERVING desired quantity of cold milk you estimate ESPRESSO) PODS you will need, making sure it is below the Simply place the pod in the filter for a “MAX” level on the reservoir (see figure 3). single shot of espresso. If there is any Once finished, slide the milk reservoir back NOTE: The pod filter included with loose paper from the pod sticking out from onto the unit ensuring it fits tightly. You your unit has been designed to the filter, be sure to fold it inside to ensure should feel the milk reservoir lock in place. work only with E.S.E. (Easy Serving a good seal when brewing. Figure 2 Figure 3 Espresso) (45 mm) pods.

POD

NOTE: You can use any type of milk you prefer, i.e. whole milk, low fat milk, organic or soy milk. CHOOSING THE PORTA-FILTER Your unit includes one porta-filter for use with ground coffee and E.S.E. pods.

6 7 PLACING THE PORTA-FILTER a. b. SELECT THE FUNCTION PREPARING CAPPUCCINO a. Position porta-filter underneath the PREPARING ESPRESSO Prior to preparing your cappuccino, brew head. adjust the level of frothed milk according b. Position handle so that the handle a. Press the Espresso Button “ ” once to your preference by turning the Froth to brew a single shot. The indicator lines up with the open lock icon “ ” light for a single shot of espresso will Control Knob to the right for more foam on the unit and fits into the groove. turn on. It will start blinking; indicating (cappuccino) and to the left for less foam c. Then, slowly turn it to the right until the that a single shot of espresso is (latte). brewing. handle is aligned with the closed lock MORE FOAM LESS FOAM symbol “ ” on the unit. c. b. Press the Espresso Button “ ” twice to brew a double shot or two single a. b. shots of espresso. The indicator light for a double shot of espresso will turn on. It will start blinking; indicating that a double shot of espresso is brewing. For both Automatic Espresso functions, the unit will start brewing the espresso according to your selection. The unit will stop automatically after TURNING THE UNIT ON NOTE: The level of foam can also be the brewing process and the light will adjusted during the brewing cycle. c. a. Make sure unit is plugged into the become solid, indicating that the cycle a. Press the Cappuccino Button “ has been completed. Your delicious appropriate electrical outlet. ” once to brew a small cup of espresso is ready to be enjoyed! cappuccino. The indicator light for b. Turn unit on “I” using the on/off “I/O” If you would like to brew less NOTE: small cup of cappuccino will turn on. switch located on the right side on the coffee than the preset serving, press It will start blinking, indicating that a unit. the function button at any time during small cup of cappuccino is brewing. the brewing process to stop when the b. Press the Cappuccino Button b. desired amount of coffee is reached. a. “ ” twice to brew a large cup of c. Press the Manual Espresso Button cappuccino. The indicator light for “ ” once to brew espresso to your PLACING THE CUP(S) large cup of cappuccino will turn on. preference. Once finished, press the a. Adjust the height by inserting the It will start blinking, indicating that a Manual Espresso Button “ ” once large cup of cappuccino is brewing. removable drip grid in the height- again to stop it. adjusting slot if you are using a small a. b. “demitasse” cup(s) to brew espresso. a. b. b. Keep the removable drip grid on top

of the removable drip tray if you are The 2 control panel lights (Espresso using a larger cup to brew cappuccino heater “ ” and Steam heater “ ” ) will or latte. start blinking during the heating process x1 x2 CAUTION: When brewing cappuccino and until the water and milk (if preparing x1 x2 or latte, please make sure to adjust the cappuccino or latte) reach the perfect frothing tube lever in order to position the temperature. Once these lights become c. The unit will start brewing cappuccino frothed milk dispensing tube to point inside solid, the unit is ready to use. according to your selection. The unit the cup that is being used. will stop automatically after the brewing process and the light will become solid, indicating that the cycle has been completed. Your delicious cappuccino is now ready to be enjoyed!

8 9 PREPARING LATTE CLEANING LIGHT WILL REMAIN 7. Dispose of any water left in the milk Prior to preparing your latte, adjust the level ILLUMINATED WHEN YOUR MACHINE reservoir and place it back in the unit. You should feel the milk reservoir lock of frothed milk according to your preference IS READY FOR A CLEANING CYCLE. in place. by turning the Froth Control Knob to the right Always switch off, unplug and allow to cool DEEP CLEANING THE FILTERS for more foam (cappuccino) and to the left for before removing parts and cleaning less foam (latte). Make sure to deep clean your filter every CLEANING THE MILK RESERVOIR AND MORE FOAM LESS FOAM 90 days for optimal brewing performance. x1 FROTHING TUBE Follow these disassembly instructions and Although you can store the milk reservoir with rinse the pieces in a large bowl of warm AFTER PREPARING YOUR BEVERAGES leftover milk in the refrigerator, it is important water. Once rinsed thoroughly, wipe dry and WITH MILK to clean the reservoir and frothing tube reassemble. regularly to avoid clogging and residue build- Once you are done preparing your up. In order to clean the milk reservoir, please Step1Step1 Step2Step2 Step3Step3 beverage with milk, you can either store follow the instructions listed below: PushPush the unit’s milk reservoir directly in the UnlockUnlock refrigerator (ready to be used for the next 1. Remove the milk reservoir from the unit time) or dispose of the leftover milk. by lifting up the milk reservoir release RemoveRemove a. Press the Latte Button “ ” once to button and simultaneously sliding the SealSeal LiftLift brew a small cup of latte. The indicator Place a large empty cup (with at least 325 milk reservoir out. mL/ 11 fl. oz. capacity) under the frothed light for a small cup of latte will turn 2. Remove the lid of the reservoir. RemoveRemove on. It will start blinking; indicating that milk dispensing tube. Turn the Froth RemoveRemove a small cup of latte is brewing. Control Knob counter clockwise to the 3. Dispose of any milk left, then rinse FilterFilter and wash the milk reservoir and its b. Press the Latte Button “ ” twice to clean position “ ” then press the Clean brew a large cup of latte. The indicator button “ ” to activate the clean function. lid thoroughly with warm soapy water. light for large cup of latte will turn on. Make sure to rinse and dry them well. Let the unit dispense the water through the Step1 Step2 Step3 It will start blinking; indicating that a tube until it comes out clear. The unit will Do not use abrasive cleaners and large cup of latte is brewing. Push automatically stop when the clean cycle scouring pads,Unlock as they will scratch the a. b. is completed, or you can press the clean finish. button “ ” to stop the process. NOTE: The milk reservoir is also Remove Seal dishwasher safe (topLift rack). Do not place the lid of the milk reservoir in the Remove dishwasher. Remove 4. Fill milk reservoir with water, not above Filter x1 x2 the MAX fill line. Place milk reservoir back onto unit, lifting up on reservoir The unit will start brewing latte according release button and simultaneously to your selection. The unit will stop sliding milk reservoir in, holding CLEANING THE FILTERS automatically after the brewing process reservoir by the lid. and the light will become solid, indicating 1. To remove the detachable bottom that the cycle has been completed. Your 5. Place a large empty cup under the froth covers from under the filters, rotate delicious latte is now ready to be enjoyed! dispensing tube. them counterclockwise towards the 6. Turn the Froth Control Knob counter unlock icon “ ”. PREPARING FROTHED MILK clockwise to the clean position “ 2. Wash the detachable bottom covers ” then press the Clean “ ” button to The Breville® One-Touch CoffeeHouse also and filters with warm soapy water. allows you to prepare frothed milk alone. x1 activate the clean function. The unit will Make sure to rinse and dry them well. Press the Manual Foam “Froth” Button start releasing steam through the froth 3. Place the detachable bottom covers “ ” if you wish to add more foam to your dispensing tube. Let the cleaning cycle back onto the filters by inserting them beverage or to prepare frothed milk for run until you no longer see any milk in their place and then rotating them any other beverage, e.g. macchiato, hot coming out of the tube, or let the cycle clockwise (away from the unlock icon chocolate, chai latte, etc. Once finished, run until it stops automatically. “ ”) until you hear it click. press the Manual Foam “Froth” Button “ ” once again to stop it. 10 11 Froth Milk Dispensing Tube Cleaning - “ ” button once and let the unit brew TO DESCALE WATER RESERVOIR: 7. Repeat Steps 1 – 6 as necessary using without affecting milk in resorvoir only tap water to rinse any remaining with water until it stops automatically. 1. Fill the reservoir with fresh, undiluted traces of vinegar out of the machine. 1. Ensure the milk reservoir and lid are white household vinegar. CLEANING THE WATER RESERVOIR properly inserted in the unit. 2. Allow appliance to sit overnight with the CLEANING NOTIFICATION 2. Place a large empty mug under the 1. Dispose of the remaining water by vinegar solution in the water reservoir. froth dispensing tube. removing the water reservoir and 3. Discard vinegar by removing the After 200 cycles the Cleaning Notification 3. Turn the Froth Control Knob counter turning it upside down over the sink. reservoir and turning it upside down will activate. clockwise to the clean position “ ” It is recommended to empty the water over the sink. 1. The Cleaning Indicator Light will remain on as a notification until the cleaning then press the “ ” button to activate reservoir between uses. 4. Rinse the water reservoir thoroughly procedure is completed. the clean function. The unit will start 2. Wash the water reservoir and its lid with tap water by filling the tank half full a. If you brew another espresso. releasing steam through the froth thoroughly with warm soapy water. with water and then pouring the water latte. or cappuccino. the cleaning dispensing tube. Let the cleaning cycle Make sure to rinse and dry them well. back out into the sink, repeating this light will turn off momentarily, but run until you no longer see any milk NOTE: Do not wash the water reservoir step twice. will start flashing after completion coming out of the tube, or let the cycle or its lid in the dishwasher. of the brew. run until it stops automatically. TO DESCALE INTERNAL PARTS: CAUTION: Do not immerse main body of b. When the unit is powered off the 4. Dispose of the water in the mug. the appliance or power cord and plug in 1. Make sure you descale the inside of Cleaning Indicator Light will turn 5. You can remove the milk reservoir with water or any other liquid. the water reservoir first by following the off. the lid and store it in the fridge for later descale steps above. c. When the unit powers down use. CLEANING THE UNIT 2. Make sure to switch the on/off button and goes into sleep mode, the to the off “O” position and the power cleaning indicator light will turn off. CLEANING THE BREW HEAD, THE 1. Wipe housing with a soft wet cloth. Do cord is disconnected from the electrical PORTA-FILTER AND FILTERS not use abrasive cleaners or scouring outlet. Fill the reservoir with undiluted pads, as they will scratch the finish. CLEANING PROCEDURE 1. Press the on/off “I/O” switch located white household vinegar. 1. Pour a solution of 50% white vinegar 2. Do not store any of the porta-filters on the right side of the unit to the off 3. Insert the porta-filter (with filter and no and 50% clean water into the water in the brew head. This can adversely position “O” and unplug the power cord coffee) and place a large empty cup on tank. Stir the solution with a spoon to affect the seal between the brew head from the electrical outlet. top of the drip tray and under the porta- make sure it is properly mixed. and the porta-filter while brewing 2. Some of the metal parts may still be filter. 2. Rotate the milk tank knob to the clean espresso. hot. Do not touch them with your hands 4. Plug the power cord into the electrical position. Place a large cup under the outlet. until they have cooled. DESCALING frothed milk dispensing tube. 3. Remove the porta-filter and discard the 5. Press the on/off button to switch the 3. Press the clean button for 5 seconds to coffee grounds or used pod. Wash both Build-up of mineral deposits in the unit unit on “I”, once the 2 control panel activate the clean mode. the porta-filter and filter thoroughly with will affect the operation of the appliance. lights (Espresso heater “ ” and a. The light slowly pulses, same as warm soapy water. Make sure to rinse Your appliance must be descaling when Steam heater “ ”) turn solid press the the brew cycle pulse through the and dry them well. you begin to notice an increase in the time Automatic Espresso “ ” Button twice. entire cleaning cycle. NOTE: Do not wash the porta-filters required to brew espresso, or when there is The vinegar will start flowing through b. The pump will turn on and off and filters in the dishwasher. excessive steaming. Also, you may notice the unit and it will stop automatically. multiple times for about 12 4. Wipe the lower part of the brew head a build-up of white deposits on the surface 6. Place a large empty cup (with at least minutes. The cleaning light will in the unit with a damp cloth or paper of the brew head. 325 mL/ 11 fl. oz. capacity) under the then turn off indicating that the towel to remove any coffee grounds The frequency of cleaning depends frothed milk dispensing tube. Fill the cleaning cycle is completed. that might have been left. upon the hardness of the water used. milk reservoir with water and place it 4. Pour out any remaining solution from 5. Place the porta-filter (without any filter) The following table gives the suggested back on the unit. Turn the Froth Control the water tank and replace with clean back in the brew head in the unit and cleaning intervals. Knob counter clockwise to the clean water. Fill with clean water up to the lock it in place. SUGGESTED CLEANING INTERVALS position “ ” then press the Clean “ Max level line. 6. Place a large empty cup under the 5. Press the manual Espresso button Type of Water Cleaning Frequency ” button to activate the clean function. porta-filter. Let the cleaning cycle run until you no “ ” and let the cycle run until 7. Plug the power cord into the electrical Soft Water (Filtered Water) Every 80 Brew Cycles longer see any milk coming out of the completed. outlet. Press the on/off “I/O” switch to Hard Water (Tap Water) Every 40 Brew Cycles tube, or let the cycle run until it stops the on position “I”. Press the Espresso automatically. 12 13 6. Rotate the milk tank knob to the clean MAINTENANCE REPLACEMENT PARTS ELECTRICAL SAFETY position and press the clean button to This appliance has no user serviceable For additional or replacement parts, please This appliance must be earthed. run the normal clean mode. parts. Any servicing beyond that described visit www.breville.co.uk or call us on If the plug is not suitable for the socket 7. Press the espresso button and then the in the Cleaning Section should be 0800 028 7154. steam function to flush the system out. performed by an Authorized Service outlets in your home, it can be removed and replaced by a plug of the correct type. Representative only. See warranty section. TROUBLESHOOTING If the fuse in a moulded plug needs to be PROBLEMS, CAUSES AND SOLUTIONS For troubleshooting and FAQs visit: changed, the fuse cover must be refitted. www.breville.co.uk/faqs The appliance must not be used without PROBLEM CAUSES SOLUTIONS the fuse cover fitted. Coffee does not • No water in reservoir. • Add water. If the plug is unsuitable, it should be come out. • Coffee grind is too fine. • Grind medium ground coffee. dismantled and removed from the supply • Too much coffee in the filter. • Fill filter with less coffee. cord and an appropriate plug fitted as • Appliance was not turned on • Plug unit into electrical detailed. If you remove the plug it must not or plugged in. outlet and turn it on. be connected to a 13 amp socket and the • Coffee has been tamped/ • Refill filter basket with coffee plug must be disposed of immediately. compressed too much. and TAMP GENTLY. If the terminals in the plug are not marked Coffee comes out • Porta-filter not rotated to full • Rotate filter holder to full or if you are unsure about the installation around the edge of lock position. lock position. of the plug please contact a qualified the porta-filter. • Coffee grounds around the • Wipe off rim. electrician. filter basket rim. • Too much coffee in the filter. • Fill with less coffee. Plug should be ASTA approved to BS1363 Milk is not foamy • Ran out of steam. • Ensure there is enough Fuse should be ASTA approved to BS1362 after frothing or it is water in the water reservoir. Green/Yellow not coming out of • Milk is not cold enough. • Chill milk and frothing (Earth) the frothing tube. pitcher prior to making cappuccino or latte. 13A Fuse • Frothing tube is blocked. • Follow the instructions to Blue clean the milk reservoir & (Neutral) frothing tube. Brown Coffee comes out • Ground coffee is too coarse. • Use a finer grind. (Live) too quickly. • Not enough coffee in filter. • Fill filter with more coffee.

Coffee is too weak. • Using single filter for double • Use double filter for double Ensure that the outer sheath of shot of espresso. shot of espresso. the cable is firmly held by the cord grip • Ground coffee is too coarse. • Use a finer grind. The control panel • Water reservoir is out of • Add water to reservoir. lights are flashing water. alternatively. • Brewing function button was • Wait until two control pressed prior to two control panel lights become solid, panel lights becoming solid. indicating machine is ready to be used. Cleaning light • Your machine is letting • Perform cleaning cycle (see remains on. you know it is ready for page 11). a cleaning cycle to be performed.

14 15

Problem: Cleaning light remains on. Causes: Your machine is letting you know it is ready for a cleaning cycle to be performed. Soution: Perform cleaning cycle (see page 11). AFTER SALES SERVICE GUARANTEE Faults that occur through, improper use, These appliances are built to the very Please keep your receipt as this will damage, abuse, use with incorrect voltage, highest of standards. There are no user be required for any claims under this acts of nature, events beyond the control serviceable parts. Follow these steps if the guarantee. of JCS (Europe), repair or alteration by unit fails to operate: This appliance is guaranteed for 1 year a person other than a person authorised • Check the instructions have been after your purchase as described in this by JCS (Europe) or failure to follow followed correctly. document. instructions for use are not covered by • Check that the fuse has not blown. During this guaranteed period, if in the this guarantee. Additionally, normal wear • Check that the mains supply is unlikely event the appliance no longer and tear, including, but not limited to, functional. functions due to a design or manufacturing minor discoloration and scratches are not fault, please take it back to the place of covered by this guarantee. If the appliance will still not operate, return purchase, with your till receipt and a copy the appliance to the place it was purchased The rights under this guarantee shall only of this guarantee. for a replacement. To return the appliance apply to the original purchaser and shall to the Customer Service Department, The rights and benefits under this not extend to commercial or communal follow the steps below: guarantee are additional to your statutory use. rights, which are not affected by this 1. Pack it carefully (preferably in the If your appliance includes a country- guarantee. Only Jarden Consumer original carton). Ensure the unit is specific guarantee or warranty insert Solutions (Europe) Limited (“JCS clean. please refer to the terms and conditions of (Europe)”) has the right to change these such guarantee or warranty in place of this 2. Enclose your name and address and terms. guarantee or contact your local authorized quote the model number (located on JCS (Europe) undertakes within the dealer for more information. the rating label) on all correspondence. guarantee period to repair or replace the Waste electrical products should not be 3. Give the reason why you are returning it. appliance, or any part of appliance found disposed of with household waste. Please 4. If within the guarantee period, state to be not working properly free of charge recycle where facilities exist. E-mail us at when and where it was purchased provided that: [email protected] for further and include proof of purchase (e.g. till • you promptly notify the place of recycling and WEEE information. receipt). purchase or JCS (Europe) of the 5. Send it to our Customer Service problem; and Jarden Consumer Solutions (Europe) Limited Department at the address below: • the appliance has not been altered 5400 Lakeside in any way or subjected to damage, Cheadle Royal Business Park Customer Service Department misuse, abuse, repair or alteration by a Cheadle person other than a person authorised Jarden Consumer Solutions (Europe) Limited SK8 3GQ by JCS (Europe). UK Middleton Road, Royton, Oldham OL2 5LN, UK Telephone: 0800 028 7154 Fax: 0161 626 0391 e-mail: [email protected]

16 17 Jarden Consumer Solutions (Europe) Limited Cheadle Royal Business Park, Cheadle, SK8 3GQ, United Kingdom e-mail: [email protected] Telephone: 0161 621 6900

For Customer Service details, please see the website.

www.breville.co.uk

© 2020 Jarden Consumer Solutions (Europe) Limited All rights reserved. Imported and distributed by Jarden Consumer Solutions (Europe) Limited, 5400 Lakeside, Cheadle Royal Business Park, Cheadle, SK8 3GQ, United Kingdom. Jarden Consumer Solutions (Europe) Limited is a subsidiary of Newell Brands Inc. The product supplied may differ slightly from the one illustrated due to continuing product development.

Printed in China

VCF107_VCF108_VCF109_VCF145_20EM1 (UK) P.N. 194607 Rev A GCDS-BRE-SL