DOCSLIB.ORG

Acoustical Solutions Center

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Acoustical Solutions Center Acoustical Solutions Center TM www.grabberman.com “The Professional’s Choice”TM Index About Grabber Acoustical Eye-Lag Screws 3 GRABBER is a leading distributor of quality products built for construction professionals. Coarse thread eye-lags for attaching to wood 3 For contractors, quality is everything. Products must be 100% reliable and durable to Self-piercing steel deck eye-lags 3 meet the demands of an increasingly fast-paced and productivity-minded profession. Self-drilling steel deck eye-lags 3 The construction industry rewards innovations that achieve real gains in efficiency, Acoustical Lag Drivers 4 performance, and job quality. All GRABBER products must meet this high standard of Lag driver 4 excellence. Grabber engineers it’s fastener products to be superior to all other products in Lag pole 4 their class. J-master installation tool 4 Two hole angle bracket 4 Grabber’s core line of products include fasteners for a variety of wood, metal, and drywall Angle clip & pin assembly 4 applications. GRABBER fasteners are regarded as the best in the industry, punctuated by Acoustical Hangers 5 the fact that it’s competitors have had to duplicate Grabber fastener designs. GRABBER Angle clip & pin assembly 5 also distributes many other product lines for the commercial and residential construction Pre-tied angle clip & pin assebembly 5 industries, including proprietary construction equipment, drywall tools and materials, Pre-tied wire and clips 5 Nitroset pin & clip assembly 6 power drives, adhesives, and accessories. Nitroset pre-tied wire to clips 6 Straight cut wire 6 Ladd joist hanger 7 Z-purlin hanger 7 Vertical flange hanger 7 Angle flange hanger 7 Spring Steel Hangers 7 Beam clip hangers 7 Rod to beam clip assembly 8 Offset bracket fastener 8 Angle bracket fastener 8 Sign hangers 8 Rod hangers 8 Self-Seating Acoustical Toggle 9 SpringShotTM acoustical toggle bolt 9 Wedge Anchors 9 Tie wire wedge anchor 9 Tie wire spike 9 Acoustical Tools and Products 9 Bright tension pins 9 Fence staples 9 Grid MatchTM rivets 10 Rivet drill bit 10 Klick-Fast riveter 10 Sure-Punch® 45° grid punch pliers 10 1/8” grid punch pliers 10 Ceiling grid alignment line (jet line) 10 Leaver action ceiling clamps 10 Heavy duty spring clamps 10 Quick change utility knife 10 Wire Attachment Tools 11 Ramset Viper 11 NitroSet 12 Acoustical Sealant 12 Acoustical smoke and sound sealant 12 Scaffolding 13 Contractor-grade scaffolding 13 Top-stop brake unit 13 Mini scaffold 14 Dump Cart 14 Lasers 14 HV301G Green beam horizontal vertical interior laser 14 HV101 horizontal vertical interior laser package 14 Specifications and Data 15 2 GRABBER Construction Products “The Professional’s Choice”TM Acoustical Eye-Lag Screws Coarse Thread Eye-Lags WOOD CONNECTION SIZE PART NO. PKG QTY DESCRIPTION Secure fastening into wood for 1/4 X 3 AL300 BULK BX - 1,000 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT hanger wire attachment. 1/4 X 4 AL400 BULK BX - 1,000 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT Type 17 point. 1/4 X 5 AL500 BULK BX - 1,000 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT 1/4 X 6 AL600 BULK BX - 500 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT Coating: Yellow Zinc 5/16 X 3 1/2 AL312 BULK BX - 1,000 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT 1/4 X 3 AL300CP CT PACK - 100 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17, 10 PACKS EACH CASE 1/4 X 4 AL400CP CT PACK - 100 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17, 10 PACKS EACH CASE 1/4 X 5 AL500CP CT PACK - 100 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17, 10 PACKS EACH CASE 5/16 X 3 1/2 AL312CP CT PACK - 100 ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17, 10 PACKS EACH CASE WOOD CONNECTION SIZE PART NO. PKG QTY DESCRIPTION Secure fastening into wood for 1/4 X 3 3ELYZ BULK BX -1,000 ACOUSTICAL EYE LAG, YELLOW ZINC hanger wire attachment. 1/4 X 4 4ELYZ BULK BX -1,000 ACOUSTICAL EYE LAG, YELLOW ZINC 1/4 X 5 5ELYZ BULK BX -1,000 ACOUSTICAL EYE LAG, YELLOW ZINC Coating: Yellow Zinc 1/4 X 3 3ELCYZ CT PACK - 100 ACOUSTICAL EYE LAG, YELLOW ZINC, 10 PACKS EACH CASE 1/4 X 4 4ELCYZ CT PACK - 100 ACOUSTICAL EYE LAG, YELLOW ZINC, 10 PACKS EACH CASE WOOD CONNECTION SIZE PART NO. PKG QTY DESCRIPTION Secure fastening into wood for 1/4 X 3 3ELZ BULK BX -1,000 ACOUSTICAL EYE LAG, CLEAR ZINC hanger wire attachment. 1/4 X 4 4ELZ BULK BX -1,000 ACOUSTICAL EYE LAG, CLEAR ZINC 1/4 X 5 5ELZ BULK BX -1,000 ACOUSTICAL EYE LAG, CLEAR ZINC Coating: Clear Zinc 1/4 X 3 3ELCZ CT PACK - 100 ACOUSTICAL EYE LAG, CLEAR ZINC, 10 PACKS EACH CASE WOOD CONNECTION SIZE PART NO. PKG QTY DESCRIPTION Secure fastening into wood for 1/4 X 3 3EL BULK BX -1,000 ACOUSTICAL EYE LAG, BLACK PHOSPHATE hanger wire attachment. 1/4 X 4 4EL BULK BX -1,000 ACOUSTICAL EYE LAG, BLACK PHOSPHATE 1/4 X 5 5EL BULK BX -1,000 ACOUSTICAL EYE LAG, BLACK PHOSPHATE Coating: Phosphate 1/4 X 3 3ELC CT PACK - 100 ACOUSTICAL EYE LAG, BLACK PHOSPHATE, 10 PACKS EACH CASE Steel Deck Eye-Lags LIGHT GAUGE METAL CONNECTION SIZE PART NO. PKG QTY DESCRIPTION Secure fastening into light gauge 1/4 X 2-3/4 H-3 BULK BX -1,000 1-1/2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SHARP POINT steel for hanger wire attachment. 1/4 X 2-3/4 VH-3 PACK - 5 lb 1-1/2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SHARP POINT Self-piercing sharp point. Installed with driver or pole tool. Coating: Yellow Zinc Steel Deck Eye-Lags HEAVY GAUGE METAL CONNECTION SIZE PART NO. PKG QTY DESCRIPTION Secure fastening into heavy gauge 1/4 X 2-7/8 H-4 BULK BX -1,000 1-1/2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, PINCH POINT steel for hanger wire attachment. 1/4 X 2-7/8 VH-4 PACK - 5 lb 1-1/2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, PINCH POINT Self-drilling pinch point. Installed with driver or pole tool. Coating: Yellow Zinc HEAVY GAUGE METAL CONNECTION SIZE PART NO. PKG QTY DESCRIPTION Secure fastening into heavy gauge 1/4 X 3 H-1 BULK BX -1,000 1-3/4” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, DRILL POINT steel for hanger wire attachment. 1/4 X 3 VH-1 PACK - 5 lb 1-3/4” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, DRILL POINT Self-drilling point. Installed with driver or pole tool. Meets requirements for ICC ESR 3135. Buy American compliant. Coating: Yellow Zinc HEAVY GAUGE METAL CONNECTION SIZE PART NO. PKG QTY DESCRIPTION Secure fastening into heavy gauge 1/4 X 2 JS1 BULK BX -1,000 3/4” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF DRILLING steel for hanger wire attachment. 1/4 X 2 VJS1 PACK - 5 lb 3/4” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF DRILLING Self-drilling point. Installed with 1/4” lag driver or pole tool. Meets requirements for ICC ESR 3135. Buy American compliant. Coating: Yellow Zinc HEAVY GAUGE METAL CONNECTION SIZE PART NO. PKG QTY DESCRIPTION 1/4 X 2 H-2 BULK BX -1,000 3/4” EFF, ACOUSTICAL EYE LAG, CLEAR ZINC, SELF DRILLING Secure fastening into heavy gauge steel for hanger wire attachment. 1/4 X 2 VH-2 PACK - 5 lb 3/4” EFF, ACOUSTICAL EYE LAG, CLEAR ZINC, SELF DRILLING Self drilling point. Installed with 1/4” lag driver or pole tool. Buy American compliant. Coating: Clear Zinc www.grabberman.com 3 “The Professional’s Choice”TM Acoustical Lag Drivers Lag Driver PART NO. DESCRIPTION ELAT 1/4” HEX SHANK EYE-LAG DRIVER Professional quality hex shanked lag driver for positive chucking. Collared ALD14 1/4” SCORPION HEX SHANK EYE LAG DRIVER and chamfered for precise lag ALD516 5/16” SCORPION HEX SHANK EYE LAG DRIVER alignment. Lag Pole PART NO. DESCRIPTION Installs I-Lag screws from ground LM12 EYE LAG POLE, 4’ - 12’ level without the need for ladders, LM 18 EYE LAG POLE, 6’ - 18’ scaffolding, or scissor lifts. Black LM24 EYE LAG POLE, 12’ - 24’ anodized aircraft quality aluminum. Designed for standard 12 gauge wire, but will work with up to 8 gauge. Telescoping extension allows for fast, easy installation from floor. J-Master Installation Tool PART NO. DESCRIPTION Fast, easy installation from floor level, L-1700 L1700 LADD J-MASTER INSTALLATION TOOL no ladders or scaffolding necessary. Works with L1701 and L1801. Ideal for strong, reliable attachment of hanger wire from open web bar joists or purlins. Threads easily into any 1/2” threaded pipe—no hammering, punching holes or wrapping wire. Acoustical Hangers Two Hole Angle Bracket PART NO. PKG QTY DESCRIPTION Zinc plated steel. A2H 1000pcs 2 HOLE ANGLE CLIPS - 3/16” X 5/16” HOLE SIZES A2HCP (count pack) 100pcs 2 HOLE ANGLE CLIPS - 3/16” X 5/16” HOLE SIZES Ten—100 count boxes per master 3/16” carton. 5/16” Angle Clip & Pin Assbembly PART NO. PKG QTY DESCRIPTION Angle clip & pin assembly for use with SPC78 100 7/8” POWER POINT CLIP & PIN ASSEMBLY powder actuated tools. SPC114 100 1-1/4” POWER POINT CLIP & PIN ASSEMBLY TEC100 100 1” X .157 TRUE EMBEDMENT PIN & CLIP ASSEMBLY Available in bulk or count packs. 4 GRABBER Construction Products “The Professional’s Choice”TM Acoustical Hangers Angle Clip & Pin Assbembly PART NO.
Load more

Recommended publications
  • BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP
    2005 BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP. 2 Phone: 516 223-3868 • Fax: 516 868-6998 969 CHURCH STREET • BALDWIN, NY 11510 LISTING BY MANUFACTURER • AEARO • CELLO • GT WATER PRODUCTS PAGE 48 PAGE 61 PAGE 44 • ALL CRAFTS • CHANNELLOCK TOOLS • GENERAL TOOLS PAGE 57 PAGE 119 PAGE 133 • ALLWAY TOOLS • COLCO HVAC • GENERAL WIRE PAGE 111 FURNACE CEMENT PAGEW 45, 133 • AMERICAN SAW PAGE 77 • GILMOUR PAGE 140-145 • COLEMAN CABLE PAGE 64 • AMERICAN STONE MIX DROPLIGHTS/ • GLOWMASTER PAGES 44, 58, 60, 61 EXTENSIONS PAGE 133 • AMES PAGE 47 • GOJO PAGES 119 • CRESCENT PAGE 61 • ANSELL EDMONT PAGES 39, 137 • GREAT NECK PAGES 57 • DAP PAGES 109/113/121/129 • ARROW PAGES 32/33/54/55/59/109 135-139 PAGE 123 • DASCO • HAGSTROM MAPS • BACHARACH PAGES 14/40/42/44 PAGE 95 PAGES 66-69 • DIAMOND • HANSON • BAG SUPPLY INC. PAGE 43 PAGE 47 PAGES 85-87 • DIXON • HEXCRAFT • BALTIMORE TOOL PAGES 45, 95 PAGES 11, 13 PAGE 42,43 • DURACELL • HK PORTER • BAYCO PAGES 54, 55 PAGE 23 PAGES 44-47 • DURABOND • HUOT • BERKLEY TOOL PAGE 59 PAGE 19, 129 PAGES 15-17, 123, 139 • EKLIND • ICE MELT INC. • BERNZOMATIC PAGE 11 PAGE 121 PAGE 131 • ENDERES • IDEAL • BETA PAGE 119 PAGES 63, 65 PAGES 66-68, 70+71, 78-85 • ENERGIZER • IRWIN • BLACKJACK PAGES 55 PAGES 17/19/21/23/38 PAGE 39 • EVERHARD 43/135 • BLITZ PAGE 121 • ITW BUILDEX PAGE 55 • FAST ORANGE PAGE 119 • BONDHUS PAGE 61 • JAMERCO DRIVE PINS PAGE 11 • FIRE POWER PAGE 111 • BOSCH PAGE 131 • JANITORIAL INC.
    [Show full text]
  • Two Slider Windows * Weatherstrip and Caulk to Seal
    * Two slider windows * Weatherstrip and caulk to seal the windows to the hardtop * Screws to attach the clamp ring to the slider window frame * Hardtop Retrofit Kit 1 Tools required for this project include a long-bladed utility knife for cutting the factory window adhesive, a chisel or other narrow scraper to remove remants of the adhesive, a cutting tool for trimming the window opening (more on this later in the instructions), and a nut driver/socket wrench for installing the window clamp ring screws. None of the tools required are things that a typical DIY-er might not have in their tool collection or couldn’t acquire at a very reasonable cost. The photos in these instructions show a side panel from that’s been cut from a factory hardtop with most of the work done on a workbench. In a typical installation the hardtop will be intact as it left the factory so the work will probably be done while the hardtop is still on the Jeep. None of the steps shown in this document are different when doing the work on a hardtop on a Jeep. The illustrations in these instructions are of a 4-door window installation. The 2-door window kit is installed in the same way. The first step of the process is to remove the factory windows. These are bonded in place by a bead of semi-soft adhesive and removal involves cutting the adhesive. If you’re not comfortable with this step, an automotive glass or body shop will probably be willing to do the removal step for you for a reasonable cost.
    [Show full text]
  • PLUMBING DICTIONARY Sixth Edition
    as to produce smooth threads. 2. An oil or oily preparation used as a cutting fluid espe cially a water-soluble oil (such as a mineral oil containing- a fatty oil) Cut Grooving (cut groov-ing) the process of machining away material, providing a groove into a pipe to allow for a mechani cal coupling to be installed.This process was invented by Victau - lic Corp. in 1925. Cut Grooving is designed for stanard weight- ceives or heavier wall thickness pipe. tetrafluoroethylene (tet-ra-- theseveral lower variouslyterminal, whichshaped re or decalescensecryolite (de-ca-les-cen- ming and flood consisting(cry-o-lite) of sodium-alumi earthfluo-ro-eth-yl-ene) by alternately dam a colorless, thegrooved vapors tools. from 4. anonpressure tool used by se) a decrease in temperaturea mineral nonflammable gas used in mak- metalworkers to shape material thatnum occurs fluoride. while Usedheating for soldermet- ing a stream. See STANK. or the pressure sterilizers, and - spannering heat resistantwrench and(span-ner acid re - conductsto a desired the form vapors. 5. a tooldirectly used al ingthrough copper a rangeand inalloys which when a mixed with phosphoric acid.- wrench)sistant plastics 1. one ofsuch various as teflon. tools to setthe theouter teeth air. of Sometimesaatmosphere circular or exhaust vent. See change in a structure occurs. Also used for soldering alumi forAbbr. tightening, T.F.E. or loosening,chiefly Brit.: orcalled band vapor, saw. steam,6. a tool used to degree of hazard (de-gree stench trap (stench trap) num bronze when mixed with nutsthermal and bolts.expansion 2. (water) straightenLOCAL VENT.
    [Show full text]
  • Countertop Mix
    Preparation: Make sure the frame is completely built before mixing the Concrete Countertop Mix. Be sure that the mixing bucket used is clean of any debris from prior use. Measure out all of the additives to be used prior to mixing. This will create a consistent mix when casting multiple pieces. Tools Required: • Concrete mixer or heavy duty ½” drill (600 RPM or less) • Drill/ driver and bits • Saw with a metal-cutting blade or hack saw blade w/ handle • Caulk gun • Rubber hammer • Trowel • Pliers • Carpenter square • Tape measure • 5 gallon bucket Materials Needed: • Melamine-coated particleboard • Coarse drywall screws PREMIUM CONCRETE • Colored Pigment (If desired) COUNTERTOP MIX™ • Potable water • Plastic sheeting High Strength ● Fast Setting ● Pourable • Styrofoam • Painters tape & packing tape • PVC pipe Uses: Advantages: • Silicone caulk (black or dark color) • Precast Countertops • High Strength-exceeds • Wire mesh, rebar, wire ties • Outdoor Kitchen or 5,000 psi at 28 days • Sanding block & palm sander Barbeque Top • Polymer Modified • Wood shims • Bar or Table Top • Pourable Consistency • Workbench or Utility Top • Sets in 18-24 Hours • Precast Wall Caps • Preblended - Just Add Helpful Items: Corporate Office: • Precast Mantels/Lintels Water Mendota Heights, MN 55120 www.tccmaterials.com www. tccmaterials.com Preparation Mixing 8 In 18-24 hours, you may remove the plastic from the 1 Make a form using ¾” melamine coated particleboard 5 Mix each 50# bag of Premium Concrete Countertop countertop surface and remove all the screws holding to the dimensions desired. Mix™ in a five gallon bucket or mortar mixer with 5 to 5.5 the form together.
    [Show full text]
  • How to Cut and Install Moulding
    How to Cut and Install Moulding Start with the Right Tools for the Job Some of the tools needed are: • Safety glasses • Power miter saw – We recommend using carbide saw blade with 80 teeth or more. Left and Right hand positioning – the side of the trim you • Miter box and hand are cutting is as important as its position on the saw table. saw – They have The positions are illustrated above. limited angle adjustment (not recommended for Vertical Position Miters crown). Use this technique for cutting • Coping saw – Only baseboard, chair rail, quarter needed if you choose round, and splice miters. the coping technique Inside corners - A left hand to install the moulding. inside corner is shown in the • Angle gage – To create the correct miter, you must photo. determine the wall corner angle. Step 1 - To accomplish this, place • Glue – To adhere the miter joints (we strongly the trim on the saw table in the recommend gluing all joints). left hand vertical position and • Hammer & nails or a pneumatic nail gun. rotate the angle gage “clock • Other tools may include a tape measure, pencil, wise” to 45°, or the desired angle C-clamp, putty and caulk. setting, and make the cut. Step 2 - To cut the mating piece simply rotate the table angle Determine the Amount of gage to the opposite 45° or desired angle, and place the Moulding to Buy next piece of trim on the saw table in the right hand verti - You must decide where the cal position and cut the trim. mouldings are to be used and measure the distances.
    [Show full text]
  • Workbench No
    TOOL REVIEW: 9 Router Tables Under$ 300 TM Woodworking To Improve Your Home Storage with Style! Cedar Garden Shed Plus: ● Stack 'em Up Storage Bins ● Trouble-Free Pocket Doors ● 5 Energy-Saving Tune-Up Tips www.WorkbenchMagazine.com No 267 September/October 2001 Contents 16 16 Cedar Garden Shed Why settle for oversized pre-fab when you can build the perfect-sized shed yourself from scratch? We’ll show you some construction techniques that can be used in all types of projects. 18 Modular Design . Basic framing makes building this shed simple. 20 Roofing Systems . Learn how to build rafters and install shingles. 22 Trim and Siding ...Pick up a few tips for applying cedar lap siding. 18 20 22 24 28 Easy Way Install a to Hang Trouble-Free Double Doors Pocket Door Hanging your own No room for a hinged doors is the way to go door? No problem. when you want to save We’ll show you how to money and get just the install a door that look you’re after for “disappears” into a your new shed. pocket in the wall. 24 28 2 WORKBENCH ■ SEPTEMBER | OCTOBER 2001 TM 34 34 Router Table Review A router table doesn’t have to be expensive to get the job done. We tested nine models — all for less than $300. Find out which one takes the “top table” award. 40 Stackable Storage Bins A simple system of interlocking keys and notches makes these stacking storage bins as sturdy as they are versatile. 40 46 46 5 Energy-Saving Tune-Up Tips Practical ways to button-up your home and take the chill out of those winter energy bills.
    [Show full text]
  • Caulk Guns Caulk Guns Chalk/Plumb Lines & Chalk Fence Layout Tools
    Caulk Guns Caulk Guns MANUAL AIR MW-41001 10.0 fl.oz. / 7:1 Wexford® Steel Caulk Gun Use for low to medium viscosity materials. Wear compensat- ing device. Retractable seal puncturing device. Metal with MW-41001 epoxy finish. Hex drive rod. Built-in ladder hook. Steel catch CCESSORIES plate. Made in UK. MW-61001 10.0 fl.oz. / 100PSI Tyne Air® Aluminum Air Caulk Gun MW-61002 20.0 fl.oz. / 100PSI Jumbo Air® Aluminum Air Caulk Gun Air action on cartridge plunger. Aluminum barrel. Adjustable air & A MW-21001 10.0 fl.oz. / 7:1 Wexford II® Nylon Fiberglass Caulk Gun regulator – 100 PSI maximum. Instant dump valve. Silencer. Use for low to medium viscosity materials. Retractable seal Quick release end cap. Rotating air hose connector included. puncturing device. Corrosion resistant. Hex drive rod. Built-in ladder hook. Steel catch plate. Automatic dripless feature. Made in England. OOLS MW-21001 T Made in UK. MW-61001 MW-41004 10.0 fl.oz. / 12:1 Chilton® Steel Caulk Gun Use for medium to high viscosity. Rotating barrel for iliary corners. Wear compensating device. Patented sintered X MW-41004 steel catch plate. Built-in ladder hook. High volume U usage. Thumb activated instant pressure release. Chalk/Plumb Lines & Chalk A Made in USA. CHALK/PLUMB LINES MW-RCL100 100” Chalk/Plumb Line Die cast reel type with enamel finish. ® MW-41004XT 10.0 fl.oz. / 18:1 Chilton Steel Caulk Gun Slide action lock and hook ring also provides Extra thrust. Use for high viscosity materials. Wear compensating device. Built-in ladder hook.
    [Show full text]
  • 2020 Therma-Tru Site Manual
    Installation Installation ............................................................................... Site 1 Finishing Instructions Finishing .................................................................................. Site 2 Maintenance Maintenance ............................................................................ Site 3 Trouble Shooting Trouble Troubleshooting ..................................................................... Site 4 Replacement Repair and Repair and Replacement ........................................................ Site 5 Index Index .................................................................................................i Installation Installation Pre-Hung Unit Installation ........................................................................................................................................... 1.3 Pre-Hung Venting Unit Installation ............................................................................................................................1.11 Pre-Hung Arch/Radius Unit Installation ................................................................................................................... 1.19 MPLS Strike Installation Instructions - Standard Inswing Shootbolt .................................................................... 1.21 MPLS Strike Installation Instructions - Impact Inswing Shootbolt ........................................................................ 1.24 MPLS Strike Installation Instructions - Standard Outswing Shootbolt ................................................................
    [Show full text]
  • TITLE Social Research in North American Moisture-Deficient Regions
    DOCUMENT RESUME ED 101 871 RC 008 292 AUTHOR Bennett, John g., Ed. TITLE Social Research in North American Moisture-Deficient Regions. INSTITUTION American Association for the Advancement ofScience, Washington, D.C.; New Mexico State Univ., Las Cruces.; Rocky Mountain SocialScience Association, Laramie, Wyo. PUB DATE 66 NOTE 76p.: Symposium held during the 42nd annualmeeting of the Southwestern and RockyMountain Division of the American Association for the Advancementof Science, Las Cruces, N.M., May 4, 1966. Forrelated document, see RC 008 293 EDRS PRICE MF -S0.76 HC-$4.43 PLUS POSTAGE DESCRIPTORS *Adjustment (to Environment); Agriculture;*Climatic Factors; *Ecology; Economics; EnvironmentalResearch; Humidity; *Rural Areas; *Socioeconomic Influences; Speeches; Technological Advancement IDENTIFIERS *Great Plains ABSTRACT Five papers presented at the 9thsymposium held during the 42nd annual meeting of theSouthwestern and Rocky Mountain Division of the American Association for theAdvancement of Science are: (1) "Do We Need aSociology of Arid Regions*?; (2) "Deficit Creating Influences for Role Performanceand Status Acquisition in Sparsely Populated Regions of theUnited States*:(3) "Ecology, Economy and Society in an AgriculturalRegion of the Northern Great Plains "; (4) The Problem of Drought Perception*:and (5) "Technological Conservatism in CattleRanching as an Adaptive Process ". The papers, centering on anecological viewpoint, aiv to suggest possibilities of basicresearch on sociological adaptations in moisture-deficient regions. Discussions covermodern agrarian and town populations in the GreatPlains and neighboring semiarid regions. (NQ) WIWI fatSI BEST OR ',SALTS*. %I S.DEPARTMSNTWELP ARE EDUCasON I pc SATSONAt.144STSTUTE DOUCATiON REPRO HAS SEEN FROM ¶ losDOCUMENT RECEIVED TLY AS ION ORIGIN DUCED EXACOR OROLNSEAT WSW OROPINIONS DIE PERSONPOINTS OP REPRE AT IND IT NECESSARIL E OF ST ATED DONOT N, ICTY ut *ENT Of0sCIAONIATOOOR EDUCATION Social Research in North American Moisture Deficient Regions Edited by: John W.
    [Show full text]
  • Caulking and Sealant Information
    Technical Bulletin 5.002 March 2016 Caulking and Sealant Information General Information: Most caulking materials are classified as a waterproof filler and sealer. Properly applied caulking will seal joints and cracks from the intrusion of water, air, dust, insects, pollution and noise. Choosing the right caulk and correctly applying it will reduce failures by keeping shrinkage and splitting to a minimum. Choosing the Correct Caulk: Understanding the characteristics and limitations of caulk is vital to the caulking’s performance. How the caulk will react to ultraviolet light and it’s compatibility to the substrate are two important factors in determining your selection. Another essential factor to consider is whether you are using the caulk indoors or outdoors. Using certain types of caulk indoors may emit volatile organic compounds (VOCs) impacting the air quality. One of the most important factors when selecting a caulk is the movement capacity. This is crucial if the joint is expected to move. There are three types of caulk to consider when movement is a factor: low-movement medium-movement caulk high-movement caulk Low-movement – Limited to joints that are not subjected to constant expansion and contraction or deflection. Low movement caulk is not very flexible once it sets and is negatively affected by sunlight and extremes of both hot and cold. Medium-movement – Ideal for slow moving joints such as masonry control joints. Recommended for use where the maximum movements are below 25 percent of the joint width. High-Movement – Suitable for large or fast moving joints, such as those between dissimilar materials like metal and concrete.
    [Show full text]
  • Tools and Equipment
    TOOLS AND EQUIPMENT EIFS | STUCCO | FOAM demandproducts.com How to Order Our products are available through distributors located throughout the world. If you cannot find a distributor in your area, email eifs@demandproducts. com or call, and we will assist you in finding one. Our operation hours are from 8:00 am to 5:00 pm Monday through Friday, EST. Our fax machines & email operate around the clock. FAX: 1.888.534.8383 E-MAIL: [email protected]. ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE (PRICES ARE IN US DOLLARS) Return Policy Demand Products Inc., will accept the return of merchandise for exchange or credit only with advance written authorization. Returned materials will be credited at the actual cost paid as determined by the proof of purchase, LESS ALL FREIGHT COSTS paid by Demand Products Inc. We do not accept returns on chemicals or coatings and some electronics. Returns must be made within 15 days of invoice and must be in new, re-stockable condition upon receipt. Materials returned must be shipped prepaid. Discontinued items and custom orders cannot be returned. Returns subject to minimum 15% restocking fee. Warranty All of our products carry an unconditional 6 month guarantee. Demand Products must be notified within 48 hours of receipt of defective or damaged merchandise or shortages. Any equipment or tools that are disassembled without prior written consent from Demand Products will have the warranty voided. Defective products will either be replaced or repaired at no charge. Abused tools will be repaired and returned only if the customer consents to charges.
    [Show full text]
  • Pcbs Window Caulk Removal
    Job Safety Analysis Safety Information for The University of North Carolina at Chapel Hill All UNC Shops Polychlorinated Biphenyls (PCBs) Window Caulk Removal **The term “caulk” will be used to describe caulking, sealants, or paints. Title Work Task Hazards Controls Pre-Operation and 1. Contact EHS concerning the 1. Not having correct tools and 1. Understand the building/structure that work will Preparing for the Job presence of PCBs, asbestos and/or training to complete be performed. lead. abatement. 2. Assess foliage or other obstacles that might 2. Completed the Training Course 2. Injury or possible death. impede access. titled, “Management of PCBs in 3. Assess for any electrical 3. Ladders or scaffolding to assist with heights. caulking and Sealants” and Hand and hazards, overhead issues. Read the JSAs for ladders, scaffolds, man lifts Power Tools Training. 4. Inhalation hazard associated and fall protection. 3. Based upon the condition of the with PCBs. 4. Wet methods and HEPA vacuum are essential caulk, tools may include utility knife, 5. Skin, eye, ingestion and dust control requirements. chisel, hammer, crowbar, putty knife, inhalation hazards. 5. Review all SDS for the solvent and new caulk scraper, electrical joint cutter with 6. High winds can spread application. oscillating blade, and HEPA vacuum. contamination beyond the For elastic and soft caulking work area. (primarily in areas protected from 7. Heat or dry removal will sunlight and weather or located increase the inhalation risk indoors), use utility knife, putty and contamination. knife, or scraper. For hard and brittle (aged and weather-exposed caulks), use chisel, hammer, crowbar, electrical joint cutter with oscillating blade.
    [Show full text]