Architect's Guide to Building Performance

Total Page:16

File Type:pdf, Size:1020Kb

Architect's Guide to Building Performance Architect’s Guide to Building Performance Integrating performance simulation in the design process Table of contents 1. Introduction ................................................................................................................................................................................................................................5 2. The case for building performance simulation ......................................................................................................................................................................7 2.1. The larger context: challenges, opportunities, and how building performance simulation can help .............................................................................9 The 2030 Challenge and 2030 Commitment ...........................................................................................................................................................................9 Opportunities beyond energy .......................................................................................................................................................................................................10 2.2. Building performance simulation for better buildings ............................................................................................................................................................10 Simulation early and often results in better buildings ...........................................................................................................................................................10 Another tool for designing better buildings .............................................................................................................................................................................. 12 2.3. Putting building performance simulation to work for the firm ............................................................................................................................................ 13 Compliance and documentation ................................................................................................................................................................................................. 15 2.4. Data with purpose—Integrating building performance simulation into firm culture ......................................................................................................16 3. Building performance simulation and the design process ................................................................................................................................................ 17 3.1. A common language for building performance simulation ....................................................................................................................................................17 Early investigations ........................................................................................................................................................................................................................ 21 EUI and building use type .............................................................................................................................................................................................................22 3.2. Goals, codes, and incentives ....................................................................................................................................................................................................... 23 Goal setting ..................................................................................................................................................................................................................................... 23 Energy codes .................................................................................................................................................................................................................................. 23 Incentives ........................................................................................................................................................................................................................................ 24 4. The building performance simulation process ....................................................................................................................................................................27 4.1. How building performance simulation works ...........................................................................................................................................................................27 Inputs ............................................................................................................................................................................................................................................... 28 Outputs ............................................................................................................................................................................................................................................. 31 Single-family residential versus commercial and institutional ............................................................................................................................................ 31 4.2. The importance of asking questions .......................................................................................................................................................................................... 31 2 Architect’s Guide to Integrating Building Performance Simulation in the Design Process 2019 4.3. Interpreting and communicating results ................................................................................................................................................................................. 33 4.4. Choosing the right tools .............................................................................................................................................................................................................. 33 4.5. Validation in the design process .................................................................................................................................................................................................41 5. Integrating building performance simulation into the firm ............................................................................................................................................. 42 5.1. ASHRAE Standard 209 building performance simulation framework .............................................................................................................................. 42 5.2. Project team structures for successful building performance simulation .......................................................................................................................48 Internal workflow ...........................................................................................................................................................................................................................48 External workflow ..........................................................................................................................................................................................................................49 Hybrid workflow .............................................................................................................................................................................................................................49 5.3. Contracts and standard of care .................................................................................................................................................................................................49 6. Putting theory to practice ......................................................................................................................................................................................................51 Building envelope and passive solar design ............................................................................................................................................................................. 51 Thermal loads ................................................................................................................................................................................................................................. 52 6.1. Solar studies and shading ............................................................................................................................................................................................................54 Project example: Tooker House, Arizona State University ..................................................................................................................................................54 Concepts ..........................................................................................................................................................................................................................................56 Approach + inputs ..........................................................................................................................................................................................................................57
Recommended publications
  • Building Design GUIDELINES Table of Contents
    Building Design GUIDELINES Table of Contents Acknowledgements . 1 Part I. Introduction Background . 2 Goals . 3 Applicability of This Document . 3 Part II. Building Design Guidelines A Context Fit. 5 B Pedestrian Friendliness. 8 C Visual Attractiveness . 18 D Sustainable Design . 32 Appendix I. Public Input Process . 36 II. Design Review Procedure . 40 III. Design Guidelines Checklist . 42 IV. Façade Renovation Toolkit . 43 Acknowledgements The Building Design Guidelines for the City of Naperville, Illinois were prepared through the help of many citizens, staff and officials of the Naperville community who participated in the planning process at stakeholder meetings, on-line surveys and open house meetings. Their involvement and insights are sincerely appreciated. City Plan Commission Derke Price, Chairman Bill Jepson Mike Brown Joe McElroy Ann Edmonds Jeffrey Meyers Paul Hinterlong Reynold Sterlin City Council George Pradel, Mayor Jim Boyajian Kenn Miller Bob Fieseler John Rosanova Richard Furstenau Darlene Senger Doug Krause Grant Wehrli City Staff Allison Laff, AICP, Planning Services Team Leader - TED Business Group Ying Liu, AICP, Community Planner - TED Business Group Suzanne Thorsen, Community Planner - TED Business Group Prepared by the City of Naperville with assistance from Lohan Anderson, LLC and A Design Consulting. 1 INTRODUCTION Background From just a handful of families residing within the City Council adopted Resolution #05-020 that states: original settlement, Naperville has grown to a community of over 140,000 people and is now a dynamic city with “It is the City of Naperville’s vision and expectation both old-fashioned charm and a high-tech corporate that issues related to design and architecture, corridor.
    [Show full text]
  • The Architecture Analysis and Design Language: an Overview Outline
    Institut Supérieur de l’Aéronautique et de l’Espace The Architecture Analysis and Design Language: an overview Outline 1. AADL a quick overview 2. AADL key modeling constructs 1. AADL components 2. Properties 3. Component connection 3. AADL: tool support AADL Tutorial -- MODELS'15 2 Introduction > ADL, Architecture Description Language: » Goal : modeling software and hardware architectures to master complexity … to perform analysis » Concepts : components, connections, deployments. » Many ADLs : formal/non formal, application domain, … > ADL for real-time critical embedded systems: AADL (Architecture Analysis and Design Language). AADL Tutorial -- MODELS'15 3 AADL: Architecture Analysis & Design Language > International standard promoted by SAE, AS-2C committee, released as AS5506 family of standards > Version 1.0 (2004), version 2 (2009), 2.1 (2012) » Based on feedback from the aerospace industry > Annex document to address specific needs » Behavior, data, error modeling, code generation, … > AADL objectives are “to model a system” » With analysis in mind » To ease transition from well-defined requirements to the final system : code production > Require semantics => any AADL entity has a semantics (natural language or formal methods). AADL Tutorial -- MODELS'15 4 AADL components > AADL model : hierarchy/tree of components » Textual, graphical representations, XMI serialization > AADL component models a software or a hardware entity » May be organized in packages : reusable » Has a type/interface, one or several implementations » May
    [Show full text]
  • Modulating Natural Ventilation to Enhance Resilience187 Through Modifying Nozzle Profiles
    MODULATING NATURAL VENTILATION TO ENHANCE RESILIENCE THROUGH MODIFYING NOZZLE PROFILES Exploring Rapid Prototyping Through 3D-Printing NIKITA BHAGAT1, ZOFIA RYBKOWSKI2, NEGAR KALANTAR3, MANISH DIXIT4, JOHN BRYANT5 and MARYAM MANSOORI6 1,2,5Department of Construction Science, College of Architecture, Texas A&M University, College Station, TX 77843 [email protected] [email protected] [email protected] 3,6Department of Architecture, College of Architecture, Texas A&M University, College Station, TX 77843 3,6{kalantar|maryammansoori}@tamu.edu 4Department of Construction Science; College of Architecture, Texas A&M University, College Station, TX 77843 [email protected] Abstract. The study aimed to develop and test an environmentally friendly, easily deployable, and affordable solution for socio-economically challenged populations of the world. 3D-printing (additive manufacturing) was used as a rapid prototyping tool to develop and test a façade system that would modulate air velocity through modifying nozzle profiles to utilize natural cross ventilation techniques in order to improve human comfort in buildings. Constrained by seasonal weather and interior partitions which block the ability to cross ventilate, buildings can be equipped to perform at reduced energy loads and improved internal human comfort by using a façade system composed of retractable nozzles developed through this empirical research. This paper outlines the various stages of development and results obtained from physically testing different profiles of nozzle-forms that would populate the façade system. In addition to optimizing nozzle profiles, the team investigated the potential of collapsible tube systems to permit precise placement of natural ventilation directed at occupants of the built space. Keywords. Natural ventilation; Wind velocity; Rapid prototyping; 3D-printing; Nozzle profiles.
    [Show full text]
  • Ten Questions Concerning Building Performance Analysis
    University of Plymouth PEARL https://pearl.plymouth.ac.uk Faculty of Arts and Humanities School of Art, Design and Architecture 2019-02-22 Ten questions concerning building performance analysis De Wilde, PJC http://hdl.handle.net/10026.1/13361 10.1016/j.buildenv.2019.02.019 Building and Environment Elsevier All content in PEARL is protected by copyright law. Author manuscripts are made available in accordance with publisher policies. Please cite only the published version using the details provided on the item record or document. In the absence of an open licence (e.g. Creative Commons), permissions for further reuse of content should be sought from the publisher or author. 10 Questions Ten questions concerning building performance analysis Pieter de Wilde a a Chair of Building Performance Analysis, School of Art, Design and Architecture, University of Plymouth, Plymouth, PL4 8AA, United Kingdom ABSTRACT Building performance analysis is an important yet surprisingly complex activity. This article explores the current understanding of the concept of building performance, and explains why its analysis is a challenging activity that mostly requires expert intervention. It addresses some of the common questions about building performance, such as: What can be learnt from other disciplines that also deal with performance? What are the benefits of applying building performance analysis in the building design process? How can building performance analysis support building operation and facility management? What is the relation between building performance analysis and the class of high performance buildings? What are the prospects of automating building performance analysis? The article concludes with some of the challenges to the development of this area of study, and provides starting points for further research in the domain of building performance analysis.
    [Show full text]
  • 1 CLOTHING and ARCHITECTURE: More in Common
    CLOTHING AND ARCHITECTURE: more in common Han Xu 20107500 1 Clothing and buildings are becoming even more alike. Both have typically served the bodies that inhabit them by maintaining environmental control and by presenting a codified exterior to the world. But now there are new kinds of physical resemblances between architecture and clothing. Various kinds of textiles and weaves are now being exploited in landscape and building design. Vast landscapes are shaped by geotexiles while building structures and envelopes exploit tensile, textile strategies, enabled by new lighter and more flexible materials and by the assistance of digital simulations. As well as becoming lighter, buildings are also becoming increasingly more temporary. The lifespans of buildings are ever shorter as their inhabitants become more transient, moving frequently from city to city. Evidence of this nomadic lifestyle can be found in fashion. Clothing, the portable envelope worn on the body, now provides some of the functions formerly associated with architecture. Designers are exploring the possibilities of integrated lights in clothes, pockets to carry portable electronic devices as well as soft electronic devices that are embedded in technical fabrics. Through other technological advances in textiles, specialized suits offer climatic control in very extreme environments. Yet other designers are integrating structure into clothing or even reviving the primitive model of a portable textile shelter. Many designers switch between fashion and architecture. Even the manufacturing processes for clothing and architecture can now be very much alike as new, highly sophisticated weaving robots automize the manufacturing process for articles of fashion or for components of buildings. In Gottfried Semper’s 1860 Style in the Technical and Tectonic Arts, we find a creation myth for today’s textile buildings and architectural suits.
    [Show full text]
  • Architectural Models
    C HAPTER 1 3 Architectural Models This chapter describes the architectural models that can be appHed to GMPLS networks. These architectures are not only useful for driving the ways in which networking equipment is deployed, but they are equally important in determining how the protocols themselves are constructed, and the responsibilities of the various protocol components. Several distinct protocol models have been advanced and the choice between them is far from simple. To some extent, the architectures reflect the backgrounds of their proponents: GMPLS sits uncomfortably between the world of the Internet Protocol and the sphere of influence of more traditional telecommunications companies. As a result, some of the architectures are heavily influenced by the Internet, while others have their roots in SONET/SDH, ATM, and even the telephone system (POTS). The supporters of the diff'erent architectures tend to be polarized and fairly dogmatic. Even though there are many similarities between the models, the proponents will often fail to recognize the overlaps and focus on what is different, making bold and forceful statements about the inadequacy of the other approaches. This chapter does not attempt to anoint any architecture as the best, nor does it even try to draw direct comparisons. Instead, each architecture is presented in its own right, and the reader is left to make up her own mind. Also introduced in this chapter is the end-to-end principle that underlies the lETF's Internet architecture and then describes three diff'erent GMPLS architectural models. The peer and overlay models are simple views of the network and are natural derivatives of the end-to-end architectural model: They can be combined into the third model, the hybrid model, which has the combined flexibihty of the two approaches.
    [Show full text]
  • Using BIM Technology to Optimize the Traditional Interior Design Work Mode
    E3S Web of Conferences 38, 03026 (2018) https://doi.org/10.1051/e3sconf/20183803026 ICEMEE 2018 Using BIM Technology to Optimize the Traditional Interior Design Work Mode Ning Ke ZHU Beijing University of Civil Engineering and Architecture, Beijing, 100044, China Abstract: the development of BIM technology and application in the field of architecture design has produced results, but BIM technology and application in the field of interior design is still immaturity because of construction and decoration engineering separation. The article analyzes the problems that BIM technology lead to the interior design work mode optimization, from the 3D visualization work environment, real-time collaborative design mode, physical analysis design mode, information integration design mode state the application in interior design. free designer from tedious drawing works, it help budget company work more accurate, it help construction 1. Introduction organization work more precise and greatly improve the The Building Information Modeling technique first project progress, it help the operation management appeared in the United States. The concept of BIM people manage and maintain the whole life cycle of undergo nearly 30 years. in 1975, Dr Charlie Eastman , construction more convenient and accurate. Carnegie Mellon University initiated the "Building the In the design stage, The application of BIM Description System" (architecture Description System) technology is aimed at architectural design mainly. working prototype, in 1984, the Hungarian Graphisoft Several major design software, such as Autodesk Revit, company researched and developed architectural design Bentley, ArchiCAD, etc, have a lot of information software named AtchiCAD, in 1986, Robert Ash in building block libraries which is easy to adjust GMW company proposed "Building Modeling" architecture building information modelling by means of conception, the definition of Building Information Model parametric design model, and they have effectively has been updated and improved.
    [Show full text]
  • Experiences and Insights from Use of a Design-Build Process in Founding a New Campus
    Experiences and Insights from Use of a Design-Build Process in Founding a New Campus Design-build was the best choice for K-State Olathe because of the flexibility with regard to unknown users and change stakeholder expectations. by Daniel C. Richardson, Lisa C. Freeman, Valerie K. York, Cynthia A. Shuman, and B. Jan Middendorf Introduction Daniel C. Richardson is the CEO of K-State Olathe and is At public research universities, state funding is decreasing responsible for building relationships with industry, developing teaching programs, and recruiting faculty. He was involved in the and budget cuts are now the norm. Establishing a new day-to-day activities associated with the acquisition process of campus may seem impossible under these conditions; K-State Olathe’s International Animal Health and Food Safety Institute. however, Kansas State University (K-State) recently established a new campus in Olathe, Kansas. K-State Lisa C. Freeman formerly served as the associate vice president for innovation at K-State Olathe. She was responsible for building Olathe’s first building, the International Animal Health and public-private partnerships relevant to teaching, research, and Food Safety Institute, a $28 million, 108,000 square foot outreach activities. She was involved in the acquisition process of facility, expands K-State into a three-campus system and K-State Olathe’s International Animal Health and Food Safety Institute. provides the Kansas City region with increased access to Valerie K. York was part of the external evaluation team that the university’s programs. K-State was able to take this documented the acquisition process for K-State Olathe’s significant step during an economic downturn, in part International Animal Health and Food Safety Institute and because of strategic planning with a focus on innovation interviewed key stakeholders about the process.
    [Show full text]
  • A Pattern Approach to Interaction Design
    A Pattern Approach to Interaction Design Jan O. Borchers Department of Computer Science Darmstadt University of Technology Alexanderstr. 6, 64283 Darmstadt, Germany [email protected] ABSTRACT perts need to work together very closely with team members To create successful interactive systems, user interface de- from other disciplines. Most notably, they need to coop- signers need to cooperate with developers and application erate with application domain experts to identify the con- domain experts in an interdisciplinary team. These groups, cepts, tasks, and terminology of the product environment, however, usually miss a common terminology to exchange and with the development team to make sure the internal ideas, opinions, and values. system design supports the interaction techniques required. This paper presents an approach that uses pattern languages However, these disciplines lack a common language: It is to capture this knowledge in software development, HCI, difficult for the user interface designer to explain his guide- and the application domain. A formal, domain-independent lines and concerns to the other groups. It is often even definition of design patterns allows for computer support more problematic to extract application domain concepts without sacrificing readability, and pattern use is integrated from the user representative in a usable form. And it is into the usability engineering life cycle. hard for HCI people, and for application domain experts even more so, to understand the architectural and techno- As an example, experience from building an award-winning logical constraints and rules that guide the systems engineer interactive music exhibit was turned into a pattern language, in her design process.
    [Show full text]
  • Digital Charrette: a Web Based Tool to Supplement
    DIGITAL CHARRETTE: A WEB BASED TOOL TO SUPPLEMENT THE ADMISSION PROCEDURE TO GRADUATE ARCHITECTURAL DEGREE PROGRAMS A Thesis by KAMESHWARI VISWANADHA Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 2001 Major Subject: Architecture iii ABSTRACT Digital Charrette: A Web Based Tool to Supplement the Admission Procedure to Graduate Architectural Degree Programs. (December 2001) Kameshwari Viswanadha, B.Arch., University of Mumbai (India) Chair of Advisory Committee: Dr. Guillermo Vasquez de Velasco The NAAB (National Architectural Accrediting Board), as an evaluator of architectural education in the United States, has established both graduate architectural curriculum criteria and student performance criteria expected to be fulfilled by the student at the time of graduation. To fulfill these standards set by the NAAB, the graduate selection committees of architecture schools require the ability to predict graduate design studio performance of the applicants. Also, the high percentage of international applicants suggests the necessity of a standardized evaluation tool. This research presents a standardized web based testing environment titled ‘Digital Charrette’ that would contribute toward the fair evaluation of applicants to graduate architectural degree programs. Spatial ability is related to design and visualization skills, a part of the NAAB criteria, and is also associated with design studio performance of architecture students. The Digital Charrette is a VRML environment within which spatial exercises are administered. It is designed to supplement the current admission procedure and would enable the selection of students with a greater potential to perform well in graduate architectural design studios.
    [Show full text]
  • Pattern Languages in HCI: a Critical Review
    HUMAN–COMPUTER INTERACTION, 2006, Volume 21, pp. 49–102 Copyright © 2006, Lawrence Erlbaum Associates, Inc. Pattern Languages in HCI: A Critical Review Andy Dearden Sheffield Hallam University Janet Finlay Leeds Metropolitan University ABSTRACT This article presents a critical review of patterns and pattern languages in hu- man–computer interaction (HCI). In recent years, patterns and pattern languages have received considerable attention in HCI for their potential as a means for de- veloping and communicating information and knowledge to support good de- sign. This review examines the background to patterns and pattern languages in HCI, and seeks to locate pattern languages in relation to other approaches to in- teraction design. The review explores four key issues: What is a pattern? What is a pattern language? How are patterns and pattern languages used? and How are values reflected in the pattern-based approach to design? Following on from the review, a future research agenda is proposed for patterns and pattern languages in HCI. Andy Dearden is an interaction designer with an interest in knowledge sharing and communication in software development. He is a senior lecturer in the Com- munication and Computing Research Centre at Sheffield Hallam University. Janet Finlay is a usability researcher with an interest in design communication and systems evaluation. She is Professor of Interactive Systems in Innovation North at Leeds Metropolitan University. 50 DEARDEN AND FINLAY CONTENTS 1. INTRODUCTION 2. THE SCOPE OF THIS REVIEW 2.1. General Software Design Patterns 2.2. Interface Software Design Patterns 2.3. Interaction Design Patterns 3. A SHORT HISTORY OF PATTERNS 3.1.
    [Show full text]
  • Passive Downdraft Systems: a Vision for Ultra-Low Energy Heating, Cooling and Ventilation
    Passive Downdraft Systems: A Vision for Ultra-Low Energy Heating, Cooling and Ventilation Andrew Corney, WSP Flack + Kurtz – Built Ecology ABSTRACT In modern buildings, fans used to move air around for ventilation, heating and cooling represent a significant component of energy consumption. As a means of reducing this energy consumption, buildings with conventional overhead air conditioning systems have pushed the limits on air quality and thermal comfort by limiting the quantity of air supplied. Similarly, natural ventilation systems, with their limited capacity to provide temperature control to meet expectations, especially in cooling are very rarely adopted as design solutions outside of the residential sector, even though they can be extremely energy efficient. Some designers have sought to overcome this by providing hybrid systems with both natural ventilation and air conditioning backup. Often the cost of two systems results in both systems being or poorer quality with the result still being a building of average performance. This paper reviews new techniques in a fourth way – enhanced natural ventilation through the use of the passive downdraft, also known as buoyancy HVAC system. The approach has the potential to significantly reduce building energy and enhance air quality (through significantly increased outside air rates (P. Wargocki et al, 2000)) in many building types and especially in relatively mild climates. Introduction Just as the use of natural ventilation is as old as buildings themselves, the concept of using buoyancy forces is also thousands of years old. In ancient Persia, bagdir towers combined with water for evaporation were used to capture wind and use it to push and pull ventilation through buildings in the hot summers, cooling the air as it entered the space.
    [Show full text]