DOCSLIB.ORG

Safety Data Sheet

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Safety Data Sheet SAFETY DATA SHEET Creation Date 20-Sep-2010 Revision Date 07-Sep-2021 Revision Number 3 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product Description: Lithium perchlorate, anhydrous Cat No. : 44225 Synonyms Perchloric acid lithium salt CAS No 7791-03-9 EC No 232-237-2 Molecular Formula Cl Li O4 REACH registration number - 1.2. Relevant identified uses of the substance or mixture and uses advised against Recommended Use Laboratory chemicals. Uses advised against No Information available 1.3. Details of the supplier of the safety data sheet Company Alfa Aesar . Avocado Research Chemicals, Ltd. Shore Road Port of Heysham Industrial Park Heysham, Lancashire LA3 2XY United Kingdom Office Tel: +44 (0) 1524 850506 Office Fax: +44 (0) 1524 850608 E-mail address [email protected] www.alfa.com Product Safety Department 1.4. Emergency telephone number Call Carechem 24 at +44 (0) 1865 407333 (English only); +44 (0) 1235 239670 (Multi-language) SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the substance or mixture CLP Classification - Regulation (EC) No 1272/2008 Physical hazards Oxidizing solids (H271) Category 1 ______________________________________________________________________________________________ ALFAA44225 Page 1 / 11 SAFETY DATA SHEET Lithium perchlorate, anhydrous Revision Date 07-Sep-2021 ______________________________________________________________________________________________ Health hazards Acute oral toxicity Category 4 (H302) Skin Corrosion/Irritation Category 1 C (H314) Serious Eye Damage/Eye Irritation Category 1 (H318) Environmental hazards Based on available data, the classification criteria are not met Full text of Hazard Statements: see section 16 2.2. Label elements Signal Word Danger Hazard Statements H271 - May cause fire or explosion; strong oxidizer H302 - Harmful if swallowed H314 - Causes severe skin burns and eye damage Precautionary Statements P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking P220 - Keep away from clothing and other combustible materials P280 - Wear protective gloves/protective clothing/eye protection/face protection P371 + P380 + P375 - In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion P301 + P330 + P331 - IF SWALLOWED: Rinse mouth. Do NOT induce vomiting P303 + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P310 - Immediately call a POISON CENTER or doctor/physician 2.3. Other hazards No information available SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substances Component CAS No EC No Weight % CLP Classification - Regulation (EC) No 1272/2008 Perchloric acid, lithium salt 7791-03-9 EEC No. 232-237-2 >95 Ox. Sol. 1 (H271) Acute Tox. 4 (H302) Skin Corr. 1C (H314) ______________________________________________________________________________________________ ALFAA44225 Page 2 / 11 SAFETY DATA SHEET Lithium perchlorate, anhydrous Revision Date 07-Sep-2021 ______________________________________________________________________________________________ REACH registration number - Full text of Hazard Statements: see section 16 SECTION 4: FIRST AID MEASURES 4.1. Description of first aid measures General Advice Show this safety data sheet to the doctor in attendance. Immediate medical attention is required. Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required. Keep eye wide open while rinsing. Skin Contact Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Call a physician immediately. Ingestion Immediate medical attention is required. Do NOT induce vomiting. Drink plenty of water. Never give anything by mouth to an unconscious person. Inhalation Remove to fresh air. If not breathing, give artificial respiration. Call a physician or poison control center immediately. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Self-Protection of the First Aider Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. 4.2. Most important symptoms and effects, both acute and delayed Causes burns by all exposure routes. Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation 4.3. Indication of any immediate medical attention and special treatment needed Notes to Physician Treat symptomatically. SECTION 5: FIREFIGHTING MEASURES 5.1. Extinguishing media Suitable Extinguishing Media Flooding quantities of water. CO 2, dry chemical, dry sand, alcohol-resistant foam. Extinguishing media which must not be used for safety reasons No information available. 5.2. Special hazards arising from the substance or mixture The product causes burns of eyes, skin and mucous membranes. Oxidizer: Contact with combustible/organic material may cause fire. May ignite combustibles (wood paper, oil, clothing, etc.). Hazardous Combustion Products Lithium oxide, Hydrogen chloride. ______________________________________________________________________________________________ ALFAA44225 Page 3 / 11 SAFETY DATA SHEET Lithium perchlorate, anhydrous Revision Date 07-Sep-2021 ______________________________________________________________________________________________ 5.3. Advice for firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Thermal decomposition can lead to release of irritating gases and vapors. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Use personal protective equipment as required. Evacuate personnel to safe areas. Avoid contact with skin, eyes or clothing. 6.2. Environmental precautions Should not be released into the environment. Do not allow material to contaminate ground water system. Do not flush into surface water or sanitary sewer system. 6.3. Methods and material for containment and cleaning up Sweep up and shovel into suitable containers for disposal. Avoid dust formation. Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Sweep up and shovel into suitable containers for disposal. 6.4. Reference to other sections Refer to protective measures listed in Sections 8 and 13. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for safe handling Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Use only under a chemical fume hood. Do not breathe dust. Do not ingest. If swallowed then seek immediate medical assistance. Keep away from clothing and other combustible materials. Hygiene Measures Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work. 7.2. Conditions for safe storage, including any incompatibilities Keep containers tightly closed in a dry, cool and well-ventilated place. Do not store near combustible materials. Corrosives area. Store under an inert atmosphere. Protect from moisture. Technical Rules for Hazardous Substances (TRGS) 510 Storage Class (LGK) Class 5.1A (Germany) 7.3. Specific end use(s) Use in laboratories SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters Exposure limits List source(s): ______________________________________________________________________________________________ ALFAA44225 Page 4 / 11 SAFETY DATA SHEET Lithium perchlorate, anhydrous Revision Date 07-Sep-2021 ______________________________________________________________________________________________ Biological limit values This product, as supplied, does not contain any hazardous materials with biological limits established by the region specific regulatory bodies Derived No Effect Level (DNEL) / Derived Minimum Effect Level (DMEL) No information available Predicted No Effect Concentration (PNEC) No information available. 8.2. Exposure controls Engineering Measures Ensure that eyewash stations and safety showers are close to the workstation location. Ensure adequate ventilation, especially in confined areas. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source Personal protective equipment Eye Protection Goggles (European standard - EN 166) Hand Protection Protective gloves Glove material Breakthrough time Glove thickness EU standard Glove comments Natural rubber See manufacturers - EN 374 (minimum requirement) Nitrile rubber recommendations Neoprene PVC Skin and body protection Wear appropriate protective
Load more

Recommended publications
  • Analysis of the Thermal Behaviour of CL-20, Potassium Perchlorate, Lithium Perchlorate and Their Admixtures by DSC and TG
    Central European Journal of Energetic Materials ISSN 1733-7178; e-ISSN 2353-1843 Copyright © 2018 Institute of Industrial Organic Chemistry, Poland Cent. Eur. J. Energ. Mater. 2018, 15(1): 115-130; DOI: 10.22211/cejem/78089 Analysis of the Thermal Behaviour of CL-20, Potassium Perchlorate, Lithium Perchlorate and Their Admixtures by DSC and TG Jing-yuan Zhang, Xue-yong Guo,* Qing-jie Jiao, Hong-lei Zhang, Hang Li State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China * E-mail: [email protected] Abstract: The thermal decomposition characteristics of CL-20, potassium perchlorate (KP), lithium perchlorate (LP), a CL-20/KP mixture, and a CL-20/LP mixture were studied using thermogravimetry-differential scanning calorimetry (TG-DSC). The DSC curves for KP exhibited three endothermic peaks and one exothermic peak. The first two endothermic peaks correspond to the rhombic- cubic transition and the fusion of KP, respectively, the third indicates the fusion of KCl, while the exothermic peak is attributed to the decomposition of KP. The DSC curves obtained from LP showed four endothermic peaks and one exothermic peak. The first two endothermic peaks indicate the loss of adsorbed water and water of crystallization, while the third and fourth are associated with the fusion of LP and LiCl, respectively; the exothermic peak is due to the decomposition of LP. The presence of KP had little effect on the thermal decomposition of CL-20 while the addition of LP increased the temperature at which CL-20 exhibits an exothermic peak. In addition, the thermal decomposition of LP appeared to be catalyzed by the presence of CL-20.
    [Show full text]
  • Breakthrough Chemistry Simulations for Lithium Processing Contents
    think simulation | getting the chemistry right Breakthrough chemistry simulations for lithium processing Using simulation to maximize your investment return in lithium extraction and processing Contents Introduction ............................................................................................................................................ 2 Process simulation deficiencies ................................................................................................................ 2 OLI Systems electrolyte thermodynamics .................................................................................................2 OLI Systems lithium initiative .................................................................................................................... 2 Lithium phase 1 and potash chemistry is complete ................................................................................... 2 Fundamental sulfate – chloride systems .............................................................................................. 3 Fundamental hydroxide and carbonate systems .................................................................................. 3 Lithium in acid environments for processing and recycling ................................................................... 3 Lithium borate systems for Li production ............................................................................................. 4 Systems related to Li hydrometallurgical processing, purifications and recycling ..................................
    [Show full text]
  • Polyorganosiloxanes: Molecular Nanoparticles, Nanocomposites and Interfaces
    University of Massachusetts Amherst ScholarWorks@UMass Amherst Doctoral Dissertations Dissertations and Theses November 2017 POLYORGANOSILOXANES: MOLECULAR NANOPARTICLES, NANOCOMPOSITES AND INTERFACES Daniel H. Flagg University of Massachusetts Amherst Follow this and additional works at: https://scholarworks.umass.edu/dissertations_2 Part of the Materials Chemistry Commons, Polymer and Organic Materials Commons, and the Polymer Chemistry Commons Recommended Citation Flagg, Daniel H., "POLYORGANOSILOXANES: MOLECULAR NANOPARTICLES, NANOCOMPOSITES AND INTERFACES" (2017). Doctoral Dissertations. 1080. https://doi.org/10.7275/10575940.0 https://scholarworks.umass.edu/dissertations_2/1080 This Open Access Dissertation is brought to you for free and open access by the Dissertations and Theses at ScholarWorks@UMass Amherst. It has been accepted for inclusion in Doctoral Dissertations by an authorized administrator of ScholarWorks@UMass Amherst. For more information, please contact [email protected]. POLYORGANOSILOXANES: MOLECULAR NANOPARTICLES, NANOCOMPOSITES AND INTERFACES A Dissertation Presented by Daniel H. Flagg Submitted to the Graduate School of the University of Massachusetts in partial fulfillment of the degree requirements for the degree of DOCTOR OF PHILOSOPHY September 2017 Polymer Science and Engineering © Copyright by Daniel H. Flagg 2017 All Rights Reserved POLYORGANOSILOXANES: MOLECULAR NANOPARTICLES, NANOCOMPOSITES AND INTERFACES A Dissertation Presented by Daniel H. Flagg Approved as to style and content by: Thomas J. McCarthy, Chair E. Bryan Coughlin, Member John Klier, Member E. Bryan Coughlin, Head, PS&E To John Null ACKNOWLEDGEMENTS There are countless individuals that I need to thank and acknowledge for getting me to where I am today. I could not have done it alone and would be a much different person if it were not for the support of my advisors, friends and family.
    [Show full text]
  • Quantification of Lithium Via Redox Titration and Ph Titration – a Method Comparison
    Quantification of Lithium via Redox Titration and pH Titration – A Method Comparison by Joseph J. Hebert A THESIS submitted to Oregon State University Honors College in partial fulfillment of the requirements for the degree of Honors Baccalaureate of Science in Chemical Engineering and Chemistry (Honors Associate) Presented May 26, 2020 Commencement June 2020 AN ABSTRACT OF THE THESIS OF Joseph J. Hebert for the degree of Honors Baccalaureate of Science in Chemical Engineering and Chemistry presented on May 26, 2020. Title: Quantification of Lithium via Redox Titration and pH Titration - A Method Comparison. Abstract approved:_____________________________________________________ Michael Lerner Lithium serves an unparalleled role for high energy-density storage applications and is vital for the continued advancement of the world economy. However, global supply is heavily reliant on lithium deposits situated in select locations, creating unpredictability in the price and concerns for the sustained production of the resource. Additionally, future demands for applications in the small electronics, automotive, and renewable energy industries threaten to place further strain on the lithium supply. Thus, the implementation of lithium battery recycling methods is critical meet this expected surge in demand for lithium-based battery technologies. Several economic obstacles and safety considerations have halted the advancement of these necessary recycling techniques. A prominent barrier to recycling efforts revolves around the reactivity of active lithium compounds that remain in used lithium batteries. As a result, significant safety precautions must be taken when handling and transporting lithium-based batteries, adding to the costs associated with recycling methods. Current research has been dedicated to developing a passivation method for the remaining active lithium in used cells, seeking to lower the classification, and subsequently the costs, associated with these materials.
    [Show full text]
  • Global Lithium Sources—Industrial Use and Future in the Electric Vehicle Industry: a Review
    resources Review Global Lithium Sources—Industrial Use and Future in the Electric Vehicle Industry: A Review Laurence Kavanagh * , Jerome Keohane, Guiomar Garcia Cabellos, Andrew Lloyd and John Cleary EnviroCORE, Department of Science and Health, Institute of Technology Carlow, Kilkenny, Road, Co., R93-V960 Carlow, Ireland; [email protected] (J.K.); [email protected] (G.G.C.); [email protected] (A.L.); [email protected] (J.C.) * Correspondence: [email protected] Received: 28 July 2018; Accepted: 11 September 2018; Published: 17 September 2018 Abstract: Lithium is a key component in green energy storage technologies and is rapidly becoming a metal of crucial importance to the European Union. The different industrial uses of lithium are discussed in this review along with a compilation of the locations of the main geological sources of lithium. An emphasis is placed on lithium’s use in lithium ion batteries and their use in the electric vehicle industry. The electric vehicle market is driving new demand for lithium resources. The expected scale-up in this sector will put pressure on current lithium supplies. The European Union has a burgeoning demand for lithium and is the second largest consumer of lithium resources. Currently, only 1–2% of worldwide lithium is produced in the European Union (Portugal). There are several lithium mineralisations scattered across Europe, the majority of which are currently undergoing mining feasibility studies. The increasing cost of lithium is driving a new global mining boom and should see many of Europe’s mineralisation’s becoming economic. The information given in this paper is a source of contextual information that can be used to support the European Union’s drive towards a low carbon economy and to develop the field of research.
    [Show full text]
  • Procedures for Trace Analysis of Dissolved Inorganic and Organic Constituents in Water Digital Object Identifier
    University of Kentucky UKnowledge KWRRI Research Reports Kentucky Water Resources Research Institute 1971 Procedures for Trace Analysis of Dissolved Inorganic and Organic Constituents in Water Digital Object Identifier: https://doi.org/10.13023/kwrri.rr.42 Gary D. Christian University of Kentucky Charles E. Matkovich University of Kentucky W. Lynn Schertz University of Kentucky Right click to open a feedback form in a new tab to let us know how this document benefits oy u. Follow this and additional works at: https://uknowledge.uky.edu/kwrri_reports Part of the Inorganic Chemicals Commons, Organic Chemicals Commons, and the Water Resource Management Commons Repository Citation Christian, Gary D.; Matkovich, Charles E.; and Schertz, W. Lynn, "Procedures for Trace Analysis of Dissolved Inorganic and Organic Constituents in Water" (1971). KWRRI Research Reports. 153. https://uknowledge.uky.edu/kwrri_reports/153 This Report is brought to you for free and open access by the Kentucky Water Resources Research Institute at UKnowledge. It has been accepted for inclusion in KWRRI Research Reports by an authorized administrator of UKnowledge. For more information, please contact [email protected]. PROCEDURES FOR TRACE ANALYSIS OF DISSOLVED INORGANIC AND ORGANIC CONSTITUENTS IN WATER Gary D. Christian Principal Investigator Charles E. Matkovich W. Lynn Schertz Research Assistants University of Kentucky Water Resources Institute Lexington, Kentucky WASHINGTON WA-TSII RESEARCH CENTl!li uaiiwtv Project Number A-013-KY (Completion Report) Agreement Nos. 14-01-0001-1636 14-31-0001-3017 July 1968 - June 1971 The work upon which this report is based was supported by funds provided by the United States Department of the Interior, Office of Water Resources Research, as authorized under the Water Resources Act • of 1964.
    [Show full text]
  • Safety Data Sheet Acc
    Page 1 of 13 Safety Data Sheet acc. to OSHA HCS (29 CFR 1910.1200) Printing date 01/22/2015 Reviewed on 01/22/2015 1 Identification · Product identifier · Trade name: Li-MnO2 Button Cell · Article number: CR2032 · Application of the substance / the mixture Lithium-based battery product. · Details of the supplier of the Safety Data Sheet · Manufacturer/Supplier: Jintan Chaochuang Battery Company Limited Xiyang Industrial Estate, Maolu Town Jintan City, Jiangsu Province, China Phone: +86-519-82483588 Fax: +86-755-29369623 · Emergency telephone number: +86-519-82483588 2 Hazard(s) identification · Classification of the substance or mixture GHS02 Flame Water-react. 3 H261 In contact with water releases flammable gas. · Additional information: There are no other hazards not otherwise classified that have been identified. 0 percent of the mixture consists of ingredient(s) of unknown toxicity. · Label elements · GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS). · Hazard pictograms GHS02 · Signal word Warning · Hazard-determining components of labeling: lithium · Hazard statements H261 In contact with water releases flammable gas. · Precautionary statements P280 Wear protective gloves and eye protection. P370+P378 In case of fire: Use for extinction: Fire-extinguishing powder. P402+P404 Store in a dry place. Store in a closed container. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. · Additional information: Information references exposures to battery contents, and not exposures to whole units. Exposures to whole units are unlikely to produce health hazards. (Contd. on page 2) 40.0.6 Page 2 of 13 Safety Data Sheet acc.
    [Show full text]
  • Lithium Perchlorate
    Lithium perchlorate sc-215260 Material Safety Data Sheet Hazard Alert Code EXTREME HIGH MODERATE LOW Key: Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME Lithium perchlorate STATEMENT OF HAZARDOUS NATURE CONSIDERED A HAZARDOUS SUBSTANCE ACCORDING TO OSHA 29 CFR 1910.1200. NFPA FLAMMABILITY0 HEALTH2 HAZARD INSTABILITY2 OX SUPPLIER Santa Cruz Biotechnology, Inc. 2145 Delaware Avenue Santa Cruz, California 95060 800.457.3801 or 831.457.3800 EMERGENCY ChemWatch Within the US & Canada: 877-715-9305 Outside the US & Canada: +800 2436 2255 (1-800-CHEMCALL) or call +613 9573 3112 SYNONYMS Cl-Li-O4, LiClO4, "perchloric acid, lithium salt" Section 2 - HAZARDS IDENTIFICATION CHEMWATCH HAZARD RATINGS Min Max Flammability 0 Toxicity 2 Min/Nil=0 Body Contact 2 Low=1 Reactivity 2 Moderate=2 High=3 Chronic 2 Extreme=4 CANADIAN WHMIS SYMBOLS EMERGENCY OVERVIEW RISK Contact with combustible material may cause fire. Irritating to eyes, respiratory system and skin. POTENTIAL HEALTH EFFECTS ACUTE HEALTH EFFECTS SWALLOWED ■ Accidental ingestion of the material may be damaging to the health of the individual. ■ Lithium, in large doses, can cause dizziness and weakness. If a low salt diet is in place, kidney damage can result. ■ Symptoms of exposure to perchlorates include shortness of breath, difficulty breathing and a bluish discolouration of the skin. The effects may be delayed for several hours following exposure. ■ Nausea and vomiting are almost always apparent after chlorate poisonings usually with upper stomach pain. Diarrhoea may also occur. EYE ■ This material can cause eye irritation and damage in some persons. SKIN ■ This material can cause inflammation of the skin oncontact in some persons.
    [Show full text]
  • Lithium in Portugal. from an Opportunity to a (Hidden) Threat?
    MASTER ENVIRONMENTAL ECONOMICS AND MANAGEMENT Lithium in Portugal. From an opportunity to a (hidden) threat? Elma Ticiana Silva Pereira M 2018 Lithium in Portugal. From an opportunity to a (hidden) threat? Elma Ticiana Silva Pereira Dissertation Master in Environmental Economics and Management Supervisor: Professor Cristina Chaves 2018 i Biographical Note Elma Ticiana Silva Pereira, born in Mafamude, Porto district, on 26 June 1994. Graduate student of Languages and International Relations, currently undertaking a Master in Environmental Economics and Management. Trainee at the Portuguese Delegation to the OECD between September 2015 and March 2016, to where she came back last year to work in the area of Economic Diplomacy, for a one-year period. She is in charge of coordinating positions with different Ministries in Lisbon, drafting and preparing relevant documents, such as proposals, presentations, reports, and summaries of meetings as well as preparing speaking points for oral interventions and attending meetings. In the meantime, during 2016 and 2017, she volunteered to work for AIESEC, an international non-governmental not-for-profit organization. Initially she worked in the Human Resources Team where she was responsible for coaching and talent and expectations management. Later she assumed the Public Relations Department Manager post where she had the opportunity to develop several assignments like being in contact with the Media, creating national B2C content, organizing and supervising events, managing the database and developing strategies to promote and present the Organization. Co-founder of the NERI-UP, the Núcleo de Estudantes de Relações Internacionais da Universidade do Porto, she assumed the position of Responsible for the Culture and Solidarity Department, between September 2014 and June 2015, being in charge of the organization and supervision of charitable and cultural events.
    [Show full text]
  • Safety Data Sheet Acc
    Page 1/7 Safety Data Sheet acc. to OSHA HCS Printing date 01/23/2014 Reviewed on 05/25/2012 1 Identification Product identifier Product name: Lithium perchlorate, anhydrous Stock number: 11639 CAS Number: 7791-03-9 EC number: 232-237-2 Relevant identified uses of the substance or mixture and uses advised against. Identified use: SU24 Scientific research and development Details of the supplier of the safety data sheet Manufacturer/Supplier: Alfa Aesar, A Johnson Matthey Company Johnson Matthey Catalog Company, Inc. 30 Bond Street Ward Hill, MA 01835-8099 Tel: 800-343-0660 Fax: 800-322-4757 Email: [email protected] www.alfa.com Information Department: Health, Safety and Environmental Department Emergency telephone number: During normal hours the Health, Safety and Environmental Department at (800) 343-0660. After normal hours call Carechem 24 at (866) 928-0789. 2 Hazard(s) identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 GHS03 Flame over circle Ox. Sol. 2 H272 May intensify fire; oxidizer. GHS06 Skull and crossbones Acute Tox. 3 H301 Toxic if swallowed. GHS07 Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2A H319 Causes serious eye irritation. STOT SE 3 H335 May cause respiratory irritation. Classification according to Directive 67/548/EEC or Directive 1999/45/EC Xn; Harmful R22: Harmful if swallowed. Xi; Irritant R36/37/38: Irritating to eyes, respiratory system and skin. O; Oxidizing R8: Contact with combustible material may cause fire. Information concerning particular hazards for human and environment: Not applicable Hazards not otherwise classified No information known.
    [Show full text]
  • Lithium Perchlorate Blend Electrolytes
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Universidade do Minho: RepositoriUM Synthesis and electrochemical characterization of aPEO – based polymer electrolytes L. C. Rodrigues1, M. M. Silva1*, H. I. M. Veiga2, J. M. S. S. Esperança2, M. Costa1, M. J. Smith1 1Centro de Química, Universidade do Minho, Gualtar, 4710-057 Braga, Portugal 2Instituto de Tecnologia Química e Biológica, UNL, Av. República 127, 2780-901 Oeiras, Portugal, www.itqb.unl.pt *[email protected] Abstract In this paper the preparation and purification of an amorphous polymer network, poly[oxymethylene-oligo(oxyethylene)], designated as aPEO, are described. The flexible CH2CH2O segments in this host polymer combine appropriate mechanical properties, over a critical temperature range from -20 to 60 ºC, with labile salt-host interactions. The intensity of these interactions is sufficient to permit solubilization of the guest salt in the host polymer while permitting adequate mobility of ionic guest species. We also report the preparation and characterization of a novel polymer electrolyte based on this host polymer with lithium tetrafluoroborate, LiBF4, as guest salt. Electrolyte samples are thermally stable up to approximately 250 ºC and completely amorphous above room temperature. The electrolyte composition determines the glass transition temperature of electrolytes and was found to vary between – 50.8 and –62.4 ºC. The electrolyte composition that supports the maximum room temperature conductivity of this electrolyte system is n = 5 (2.10×10-5 S cm-1 at 25 ºC). The electrochemical stability domain of the sample with n = 5 spans about 5 V measured against a Li/Li+ reference.
    [Show full text]
  • US3075827.Pdf
    3,®75,8%Z7 United states Q@ Patented Jan. 29, 1963 1 2 atmosphere or by ?lling these spaces with inert gases‘. 3,075,827 7 The reaction vessel 2 preferably includes suitable heating PRGCESS FGR PR?DUCl-NG ANHYDRGUS means 4 and agitating means 6 for respectively heating LETHIUM PERCBEQRATE John W. Cretzrneyer, Minneapolis, Minn., assignor to and agitating the contents of the vessel. If the tempera Lithium Corporation of America, Inc, Minneapolis, ture to which the starting materials are heated to dissolve Minn, a corporation of Minnesota the salts and to effect the et?cient reaction thereof is Filed Sept. 8, 1959, Ser. No. 838,695 above the boiling point of the organic solvent, then an 8 Claims. (Cl. 23-85) excess of solvent is used and the evaporated solvent is fed to a condenser where it is condensed and returned This invention relates to a process and apparatus for 10 to the reaction vessel. To this end, an outlet conduit 8 producing anhydrous lithium perchlorate. The pro extends from the top of the reaction vessel 2 to a suit duction of anhydrous lithium perchlorate by processes able condenser ltl which condenses the evaporated or heretofore known involves the production of lithium per ganic solvent and returns the condensed solvent through chlorate containing water of hydration followed by a de a return conduit 12 to the reaction vessel. hydration procedure at elevated temperatures. The de 15 As previously indicated, the chemical reaction be— hydration procedure is slow and, therefore, costly. It is, tween the dissolved anhydrous starting materials pro~ accordingly, an object of the present invention to provide duces the desired lithium perchlorate dissolved in the a process and apparatus for producing anhydrous lithium organic solvent and a precipitate of the other reaction perchlorate which avoids the disadvantages of these proc product which would be sodium chloride if sodium per esses, particularly the costly dehydration of hydrated 20 chlorate and lithium chloride were the starting materials.
    [Show full text]