DOCSLIB.ORG

Price List 2021 (Swedish Kronor / SEK)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Price List 2021 (Swedish Kronor / SEK) Price list 2021 (Swedish kronor / SEK) CARVING KNIFE TIMBER AXE BS901 Children's carving knife sharp tip 15x50 mm 630 Y415 Timber axe right 1,6 kg 3 400 BS902 Children's carving knife rounded tip 15x50 mm 630 Y415HH Timber axe right-right 1,6 kg 3 400 BS903 Children's carving knife flat tip 15x40 mm 630 Y414 Timber axe left 1,6 kg 3 400 K203 Carving knife 16x40 mm 640 Y413 Timber axe straight 1,6 kg 3 400 K214 Carving knife 15x50 mm 640 Y409 Narrow axe 1,9 kg 2 200 K210 Carving knife 16x50 mm pointed 640 Y406H Timber axe single bevel right 2,4 kg 3 400 K201 Carving knife 17x60 mm 640 Y406V Timber axe single bevel left 2,4 kg 3 400 K209 Carving knife 16x70 mm 650 ADZE K211 Carving knife 16x80 mm 660 Y420 Adze mini 0,4 kg 2 200 K204 Carving knife 11x35 mm 640 Y410 Adze 0,6 kg 2 300 K202 Carving knife 8x50 mm 640 Y411 Adze 0,7 kg 2 400 K212 Carving knife 20x80 mm 710 Y412 Adze 1,3 kg 2 600 K213 Carving knife 22x100 mm 730 Y421 Flat adze mini 0,4 kg 2 200 SPOON KNIFE Y416 Flat adze 1,3 kg 2 600 SK105 Spoon knife mini, right 660 SPLITTING IRON SK106 Spoon knife mini, left 660 BS906 Splitting iron unshafted 40x5 cm / 6 mm 1 500 BS904 Children's spoon knife, right 630 TOOL SET BS905 Children's spoon knife, left 630 BS910-1 Children's wood carving set, sharp tip 2 520 SK101 Spoon knife standard, right 650 BS910-2 Children's wood carving set, rounded tip 2 520 SK102 Spoon knife standard, left 650 BS910-3 Children's wood carving set, flat tip 2 520 SK103 Spoon knife large, right 670 OS9920 Wood carving set 3 210 SK104 Spoon knife large, left 670 OS9921 Small wood sculpting set 3 710 SK109 Spoon knife large, long handle, right 710 EDGE PROTECTION SK112 Spoon knife large, long handle, left 710 OS9925 Knife roll 600 SK107 Crook knife, unshafted, right 680 PS901 Leather sheath, Children's carving knife 630 SK108 Crook knife, unshafted, left 680 PS902 Leather sheath, Carving knife, short 710 SK110 Carving hook 60 mm, right 870 PS903 Leather sheath, Carving knife, long 720 SK111 Carving hook 60 mm, left 870 PS910 Leather sheath, Carving axe 0,4 kg 250 ENGRAVING AND CHIP CARVING PS911 Leather sheath, Carving axe 0,6 kg 250 K208 Mini double bevel chisel oblique 13x32 mm 640 PS912 Leather sheath, Carving axe 0,75 kg 250 BSSL-15 Double bevel chisel oblique 15 cm / 15 mm 650 PS913 Leather sheath, Little Viking axe 0,8 kg 250 K207 Engraving knife, oblique, 13x32 mm 640 PS914 Leather sheath, Backpack axe 0,4 kg 250 K206 Engraving knife, knife, 14x34 mm 640 PS915 Leather sheath, Cutting axe 0,7 kg 250 K205 Chip carving knife 8x35 mm 640 MAINTENANCE DRAWKNIFE OS9932 Japanese slipstone, grit 1000 230 B503 Drawknife 14 cm 850 OS9936 Japanese slipstone, grit 4000 270 B504 Drawknife 20 cm 890 OS9931 Japanese slipstone, grit 8000 450 B505 Drawknife 20 cm, handle 45 deg 920 OS9934 Japanese mini slipstone, grit 1000 90 B502 Drawknife 27 cm 1 700 OS9930 Japanese mini slipstone, grit 4000 110 B501 Timber drawknife 32 cm 1 900 OS9933 Japanese mini slipstone, grit 8000 170 KNIFE BLADE OS9935 Round conical slipstone, grit 280 280 KB304 Knife blade 16x40 mm 440 OS9941 Polishing disc of wool 350 KB305 Knife blade 15x50 mm 440 OS9942 Polishing wax 50 KB303 Knife blade 17x60 mm 450 ACCESSORIES KB306 Knife blade 16x70 mm 460 OS9953 Linseed oil, 1 litre 100 KB302 Knife blade 22x75 mm 470 OS9951 Linseed oil, 5 litre 360 KB308 Knife blade 16x80 mm 470 BS909 Shaving horse small, mounted 2 700 KB309 Knife blade 20x80 mm 470 BS908 Shaving horse large, mounted 2 900 KB301 Knife blade 25x85 mm 480 BS912 Shaving horse small, unmounted 2 600 KB307 Knife blade 22x100 mm 530 BS911 Shaving horse large, unmounted 2 700 CARVING AXE OS9963 "Tälj!" 50 Y401 Carving axe 0,4 kg 1 600 OS9964 "Ytbehandling" 50 Y419 Carving axe 0,6 kg 1 800 OS9965 "De Svenska Träslagens Virkesguide" 50 Y402 Carving axe 0,75 kg 2 000 SERVICE Y403 Carving axe 1,3 kg 2 300 OS9990 Knife sharpening 150 Y404 Sculpture axe 0,8 kg 2 400 Y418 Little Viking axe 0,8 kg 2 600 Y405 Viking axe 1,5 kg 3 400 CUTTING AXE Y417 Backpack axe 0,4 kg 1 600 Y408 Cutting axe 0,7 kg 2 000 Y407 Cutting axe 1,8 kg 2 900 HOOKED DOGLEG GOUGE STRAIGHT CHISEL NB16-16-14 Hooked dogleg gouge small 16-14 mm 690 BSSJ-12 Straight chisel 15 cm / 12 mm 650 NB16-20-17 Hooked dogleg gouge small 20-17 mm 690 RST-5 Straight chisel 5 mm 650 NB16-30-17 Hooked dogleg gouge small 30-17 mm 690 RST-10 Straight chisel 10 mm 650 NB22-16-14 Hooked dogleg gouge 16-14 mm 720 RST-15 Straight chisel 15 mm 650 NB22-20-18 Hooked dogleg gouge 20-18 mm 720 RST-20 Straight chisel 20 mm 650 NB22-30-20 Hooked dogleg gouge 30-20 mm 720 RST-30 Straight chisel 30 mm 650 NB22-30-25 Hooked dogleg gouge 30-25 mm 720 RST-40 Straight chisel 40 mm 650 NB22-40-35 Hooked dogleg gouge 40-35 mm 750 BEATING CHISEL NB22-70-35 Hooked dogleg gouge 70-35 mm 750 SLST-30 Beating chisel straight 30 mm 1 070 NB22-100-40 Hooked dogleg gouge 100-40 mm 750 SLST-40 Beating chisel straight 40 mm 1 070 NB22-200-40 Hooked dogleg gouge 200-40 mm 750 TIMBER CHISEL STRAIGHT UPNOSED GOUGE TST-50 Timber chisel 50 mm 1 800 RU-30-25 Straight upnosed gouge 30-25 mm 720 ICE TOOLS RU-40-35 Straight upnosed gouge 40-35 mm 720 ISSK Ice gouge 36 cm / 100-65 mm 1 900 RU-100-40 Straight upnosed gouge 100-40 mm 750 ISST Ice chisel 66 cm / 80 mm 1 900 RU-200-40 Straight upnosed gouge 200-40 mm 750 TURNING TOOLS STRAIGHT HOOKED GOUGE SV803 Turning gouge pointed 28 cm / 14 mm 710 RKM-20-20 Short straight hooked gouge 20-20 mm 690 SV802 Turning gouge pointed 31 cm / 20 mm 730 RK-20-20 Straight hooked gouge 20-20 mm 690 SV801 Turning gouge rounded 37 cm / 25 mm 760 BENT GOUGE SV805 Pointed chisel 33 cm 690 BSSK-20-13 Bent gouge 15 cm / 20-13 mm 670 SV804 Skew chisel 38 cm 690 SS-20-18 Bent gouge 20-18 mm 700 SV806 Turning hooked gouge 35 cm 710 SS-30-25 Bent gouge 30-25 mm 700 SV807 Turning hook 36 cm / 8 mm 710 SS-40-32 Bent gouge 40-32 mm 730 SV808 Turning hook 36 cm / 12 mm 730 SS-70-35 Bent gouge 70-35 mm 730 SV809 Turning hook 42 cm / 18 mm 760 SS-100-40 Bent gouge 100-40 mm 730 SPECIAL TOOLS SS-200-40 Bent gouge 200-40 mm 730 HOV1 Hoof knife, right 730 BEATING GOUGE HOV2 Hoof knife, left 730 SLJR-40-35 Beating gouge straight 40-35 1 070 PR01 Awl 580 SLJS-40-35 Beating gouge bent 40-35 1 070 STRAIGHT GOUGE MS-20-12 Mini gouge 20-12 mm 660 BSRS-10-11 Straight gouge 15 cm / 10-11 mm 670 BSRS-30-13 Straight gouge 15 cm / 30-13 mm 670 Customer info: RS-5-4 Straight gouge 5-4 mm 670 Name / address RS-7-6 Straight gouge 7-6 mm 670 RS-10-8 Straight gouge 10-8 mm 670 RS-16-14 Straight gouge 16-14 mm 670 RS-20-8 Straight gouge 20-8 mm 670 RS-20-12 Straight gouge 20-12 mm 670 RS-20-18 Straight gouge 20-18 mm 700 RS-30-10 Straight gouge 30-10 mm 670 RS-30-15 Straight gouge 30-15 mm 670 RS-30-25 Straight gouge 30-25 mm 700 RS-40-15 Straight gouge 40-15 mm 670 RS-40-22 Straight gouge 40-22 mm 700 RS-40-32 Straight gouge 40-32 mm 730 RS-70-15 Straight gouge 70-15 mm 670 RS-70-22 Straight gouge 70-22 mm 700 RS-70-40 Straight gouge 70-40 mm 730 Order your tools at djarv.se and we will forge them for you. RS-100-15 Straight gouge 100-15 mm 670 On our website there is also plenty of inspiration and information. RS-100-22 Straight gouge 100-22 mm 700 RS-100-40 Straight gouge 100-40 mm 730 We offer advance payment by invoice, RS-200-15 Straight gouge 200-15 mm 670 when the tools are ready to be sent. RS-200-22 Straight gouge 200-22 mm 700 RS-200-40 Straight gouge 200-40 mm 730 The invoice offers multiple payment options, like Swish, Bg and IBAN. V-GOUGE G6035 Mini V-gouge bent 60 deg / 3,5 mm 920 G606 V-gouge 60 deg / 6 mm 920 G907 V-gouge 90 deg / 7 mm 920 S. Djärv Hantverk AB ▪ Org.nr 556425-1568 Sör Nävde 15 ▪ SE-77492 Avesta ▪ SWEDEN +46 (0)226 221 41 ▪ +46 (0)73 075 36 12 Instagram: @svante.djarv [email protected] ▪ djarv.se.
Load more

Recommended publications
  • Tula Adze Download
    Australian Artefact Fact Sheet Tula adze Tula adzed dish Tula adze slug Tula adze slug Where? Across most of Australia with a focus on Central and Western Australia. The name tula or tuhla comes from the Wangkangurru people of the Simpson Desert. What? The tula adze is a hafted flaked stone tool mostly used for wood working (scraping, adzing and hardwood such as Acacias and Eucalypts. They were also used to butcher animals and to chop plants. When they are used to adze hard wood they blunt quickly and were then resharpened repeatedly by knocking off small flakes along the working edge. In archaeological sites they are usually found as exhausted slugs that have been removed from their hafting, discarded and then replaced. When? Tools such as tulas are rare in archaeological sites and especially places that can be dated. This has meant that there are small numbers that have been securely dated. The oldest dated tula adzes come from rockshelters in the Hamersley Ranges near Newman and Packsaddle dated to between 3,700 and 3,500 years ago. How? Tula adzes are made by flaking a core. They have a wide flat top (platform) that allows easy hafting and they have a curved shaped back (convex). The adzes were usually hafted into the ends of a wooden stick or spear thrower encasing the end of the stick/spear thrower in a resin glue made from spinifex or grevillea resin, kangaroo poo and sand. It took about two tulas to make a boomerang and an undecordated spear thrower would take about eight hours to make with a tula adze.
    [Show full text]
  • The Bow and Arrow in the Book of Mormon
    The Bow and Arrow in the Book of Mormon William J. Hamblin The distinctive characteristic of missile weapons used in combat is that a warrior throws or propels them to injure enemies at a distance.1 The great variety of missiles invented during the thousands of years of recorded warfare can be divided into four major technological categories, according to the means of propulsion. The simplest, including javelins and stones, is propelled by unaided human muscles. The second technological category — which uses mechanical devices to multiply, store, and transfer limited human energy, giving missiles greater range and power — includes bows and slings. Beginning in China in the late twelfth century and reaching Western Europe by the fourteenth century, the development of gunpowder as a missile propellant created the third category. In the twentieth century, liquid fuels and engines have led to the development of aircraft and modern ballistic missiles, the fourth category. Before gunpowder weapons, all missiles had fundamental limitations on range and effectiveness due to the lack of energy sources other than human muscles and simple mechanical power. The Book of Mormon mentions only early forms of pregunpowder missile weapons. The major military advantage of missile weapons is that they allow a soldier to injure his enemy from a distance, thereby leaving the soldier relatively safe from counterattacks with melee weapons. But missile weapons also have some signicant disadvantages. First, a missile weapon can be used only once: when a javelin or arrow has been cast, it generally cannot be used again. (Of course, a soldier may carry more than one javelin or arrow.) Second, control over a missile weapon tends to be limited; once a soldier casts a missile, he has no further control over the direction it will take.
    [Show full text]
  • Major Work by British Artist William Turnbull Joins the Wadsworth’S Sculptures on Main Street
    FOR IMMEDIATE RELEASE Media Contact: Kim Hugo, (860) 838-4082 [email protected] Image files to accompany publicity of this announcement will be available for download at http://press. thewadsworth.org. Email to request login credentials. Major Work by British Artist William Turnbull Joins the Wadsworth’s Sculptures on Main Street Hartford, Conn. (Sept. 19, 2019)— Earlier this week the Wadsworth Atheneum Museum of Art installed Large Horse (1990) one of the largest and most archetypal works by acclaimed twentieth century artist William Turnbull (1922–2012). Also on view is a selection of eight drawings he made between 1950 and 1957. “Art has the power to humanize the urban environment with sculpture having a distinguishing public art role throughout history,” says Thomas J. Loughman, Director and CEO of the Wadsworth. “We are delighted to work with the Turnbull Studio in creating this major addition to the cityscape, particularly as the world is rediscovering Turnbull’s work.” The Wadsworth has been placing sculpture on Main Street for a century beginning with Enoch Woods’ sculpture honoring Nathan Hale which was installed in 1894 and has been on view ever since. Large Horse (1990) by Turnbull joins Tony Smith’s Amaryllis (1965), Conrad Shawcross’ monumental steel Monolith (Optic) (2016), and Woods’ Nathan Hale (1889) on the museum’s front lawn. Turnbull’s casting repertoire began in the early 1950s when his most frequent subjects included bronze masks, heads, and horses. Large Horse (1990) is the product of a late- career return to these three dominant themes. On loan to the Wadsworth from the artist’s estate, the nine-and-a-half-foot bronze is the largest cast metal sculpture Turnbull made.
    [Show full text]
  • Klopsteg, Turkish Archery & the Composite
    FfootJiptecc: Sketch of a Turkish archcr at full draw, ready to loose a flight arrow. [Based on a photoK'aph by Dr. Stocklcin published in llalıl I.them “U Palai* Dc Topkapou (Vicux Scrail)”. Mitnm. <k U Ltbratic Kanaat 1931 page 17. Information supplied by Society of Archcr-Antiquaries member Jamcr. H. Wiggins. | TURKISH ARCHERY AND THE COMPOSITE BOW by Paul E. Klopsteg F ormer D irector of R esearch N orthwestern T echnological I nstitute A Review of an old Chapter in the Chronicles of Archery and a Modern Interpretation Enlarged Third Edition Simon Archery Foundation The Manchester Museum, The University Manchester M139PL, Kngland Also published by the Simon Archcry Foundation: A Bibliography of Arthtry by Fred Lake and HaJ W right 1974 ISBN 0 9503199 0 2 Brazilian India» Arcbeiy bv E. G. Heath and Vilma Chiara 1977 ISBN 0 9503199 1 0 Toxopbilns by Roger Ascham 1985 ISBN 0 9503199 0 9 @ Paul E. Klopsteg, 1934, 1947 and 1987 First published by rhe author in the U.S.A. in 1934 Second edition, Revised published by the author in the U.S.A. in 1947 This enlarged edition published in 1987 JSBN 0 9503199 3 7 Printed and bound in Great Britain by Butler & Tanner Ltd, Frome and London c^ pur TABLE 0F CONTENTS Pa& In troduction ....................... ............................... ................................. Y|J Dr. Paul E. Klopsteg. Excerpts about him from articles written by him ...................................... ; .............................................................. IX Preface to the Second E d itio a ............................................................... xiii Preface to the First E dition........................................................ I The Background of Turkish Archery..................................... 1 II The Distance Records of the Turkish Bow.........................
    [Show full text]
  • Marquesan Adzes in Hawai'i: Collections, Provenance
    University of Hawai‘i at Hilo HOHONU 2015 Vol. 13 outside the Marquesas have never been found in the Marquesan Adzes in Hawai‘i: island group (Allen 2014:11), but this groundbreaking Collections, Provenance, and discovery was spoiled by the revelation that a yachtsman who had visited both places had donated the artifacts, Sourcing and apparently mixed them up before doing so (202). Hattie Le‘a Wheeler Gerrish Researchers with access to other sources of information Anthropology 484 can avoid possible pitfalls. Garanger (1967) laments, Fall 2014 “What amount of dispersed artifacts were illegally exported by the numerous voyagers drawn by the Abstract mirage of the “South Seas” and now irrevocably lost to In 1953, Jack and Leah Wheeler returned to science?” (390). It is my intent to honor the wishes of Hawai'i with 13 adze heads and one stone pounder my maternal grandparents, Jack and Leah Wheeler, that they had obtained during their travels in the Marquesas, the artifacts they (legally) brought home to Hawai'i from Tuamotus, and Society Islands. The rather general the East Pacific not be “irrevocably lost to science.” I provenance of these artifacts presents a challenge will attempt to source their stone artifacts, and discover that illustrates the benefits of combining XRF with what geochemistry can tell us of these tools of uncertain other sources of information, and the limits of current provenance. My experience strengthens my belief that knowledge of Pacific geochemistry. EDXRF reveals that combining non-destructive EDXRF with other sources five of the artifacts are likely made of stone from the of information such as oral history, written accounts, Eiao quarry, and the rest may represent five additional and morphological comparison, enhances the value of sources.
    [Show full text]
  • Chapter 8: Fire Fighter Tools and Equipment 27
    Chapter 8: Fire Fighter Tools and Equipment 27 Chapter 8: Fire Fighter Tools and Equipment Matching 1. E (page 273) 3. I (page 281) 5. C (page 284) 7. D (page 276) 9. F (page 276) 2. A (page 273) 4. B (page 284) 6. G (page 269) 8. H (page 274) 10. J (page 284) Multiple Choice 1. C (page 272) 6. B (page 274) 11. D (page 272) 16. C (page 275) 2. D (page 280) 7. A (page 272) 12. C (page287) 17. D (page 284) 3. D (page 268) 8. A (page 277) 13. A (page 284) 18. B (page 281) 4. B (page 284) 9. B (page 286) 14. A (page 277) 19. D (page 284) 5. C (page 268) 10. D (page 277) 15. D (page 277) 20. D (page 286) Vocabulary 1. Claw bar: A tool with a pointed claw-hook on one end and a forked- or f lat-chisel pry on the other end that can be used for forcible entry. (page 274) 2. Reciprocating saw: A saw powered by either an electric motor or a battery motor that rapidly pulls the saw blade back and forth. (page 278) 3. Overhaul: The phase in which you examine the fire scene carefully and ensure that all hidden fires are extinguished. (page 285) 4. Gripping pliers: A hand tool with a pincer-like working end that can also be used to bend wire or hold smaller objects. (page 269) 5. Crowbar: A straight bar made of steel or iron with a forked-like chisel on the working end.
    [Show full text]
  • Provenance Studies of Polynesian Basalt Adze Material: a Review and Suggestions for Improving Regional Data Bases
    Provenance Studies of Polynesian Basalt Adze Material: A Review and Suggestions for Improving Regional Data Bases MARSHALL 1. WEISLER PACIFIC ARCHAEOLOGISTS have long been interested in the settlement of Polyne­ sia, the origin of colonizing groups at distant archipelagoes, and subsequent social interaction between island societies (see, for example, Howard 1967; Irwin 1990; Kirch and Green 1987). Early material studies in Polynesia inferred migration routes and social interaction from the distribution of similar architecture, especially marae (Emory 1943; also R. Green 1970), adzes (Emory 1961), and fishhooks (Sinoto 1967). The identification of exotic raw materials and finished artifacts throughout Polynesia eliminates the ambiguity often presented by linking stylistic similarities across space and through time. In relation to the long history of identifying exotic lithic materials from archaeological sites (see, for example, Grimes 1979), the compositional analysis of oceanic obsidians was begun quite recently (Key 1968). The efficacy of chemical characterization of artifacts and quarry material in New Zealand provided the in­ centive to apply similar techniques to obsidian of the southwest Pacific, where several large sources were known and where the archaeological distribution of this material was tl)ought to be widespread (Ambrose 1976). Although it has been possible to define the spread and interaction of human groups in the southwest Pacific by determining the spatial and temporal distribution of obsidian and pot­ tery, these materials are restricted to a few areas in Polynesia. Consequently, the effort to document prehistoric interaction throughout Polynesia must proceed without using obsidian or pottery. This leaves only basalt (debitage, formed arti­ facts, and oven stones), pearlshell, and volcanic glass as material for distributional studies (Best et al.
    [Show full text]
  • The Wood-Carver's Art in Ancient Mexico
    1 si Vol. H THE WOOD-CARVER'S ART IN ANCIENT MEXICO BY MARSHALL H. SAVILLE NEW YORK MUSEUM OF THE AMERICAN INDIAN HEYE FOUNDATION 1925 CONTRIBUTIONS FROM THE MUSEUM OF THE AMERICAN INDIAN HEYE FOUNDATION VOLUME IX THE WOOD-CARVER'S ART IN ANCIENT MEXICO SAVILL6--MEXICAN WOOD-CARVER'S ATLATLS FRONT AND REAR VIEWS MUSEUM OF THE AMERICAN INDIAN HEYE FOUNDATION. NEW YORK THE WOOD-CARVER'S ART IN ANCIENT MEXICO BY MARSHALL H. SAVILLE NEW YORK MUSEUM OF THE AMERICAN INDIAN HEYE FOUNDATION 19 25 PANDICK PRESS, NEW YORK CITY JAMES B. FORD Generous and sympathetic patron of geographical, natural history, and anthropological research, counselor and friend of institutions and individuals in their pursuit of knowledge, this volume is dedi- cated by the Board of Trustees of the Museum of the American Indian Heye Foundation in commemoration of his eightieth anniversary. New York, June 9, 1925 PREFACE THIS study of the Wood-carver's Art in Ancient Mexico is a sequence of the writer's monograph on Turquois Mosaic Art in Ancient Mexico, in the publication of which the description and illustration of the collection of Mexican mosaics in the Museum of the American Indian, Heye Foundation, were the chief object. In like manner the main incentive for the preparation of the present mono- graph is the description and illustration of two splendid examples of Mexican wood-carving which came to the Museum with the mosaic collection, the gift of Mr. James B. Ford. As it was our privilege to include in the former book all the known examples of mosaics from Mexico, it has been equally our good fortune to have examined practically all of the known specimens of wood-carving in the museums of Europe and Mexico, in order to complete our investigations of the subject.
    [Show full text]
  • Stone Adzes Or Antler Wedges
    STONE ADZES OR ANTLER WEDGES ? AN EXPERIMENTAL STUDY ON PREHISTORIC TREE -FELLING IN THE NORTHWESTERN BOREAL REGION Jacques Cinq-Mars Department of Anthropology, 13-15 HM Tory Building, University of Alberta, Edmonton, AB, Canada T6G 2R3; [email protected] or [email protected] Raymond Le Blanc Department of Anthropology, University of Alberta; [email protected] ABSTRACT “Adze-cut stumps” is the name commonly used by both local residents and passing ethnographers and archaeologists to designate culturally modified tree stumps that are known to occur in many areas of the Northwestern boreal forest. As the name implies, they have been viewed as indicative of ancient logging or tree-felling activities, presumably carried out with stone adzes, and whose resulting particu- lar morphological attributes have long been interpreted as indicative of a relatively great antiquity, i.e., generally dating back to (or prior to) the period of European contact when traded steel axes quickly replaced the stone adzes. However, a close examination of available ethnographic data, personal field observations, and, particularly, the first results of an experimental tree-felling study indicate quite convincingly that such features should best be interpreted as having been created by an entirely dif- ferent technique making use of “antler wedges.” Furthermore, field observations from the Old Crow/ Porcupine area can be used to suggest that quite a number of these “stumps,” especially when found in clusters, may well be associated with the construction and maintenance of caribou fences, semisubter- ranean housepits, and various types of caches. Finally, recently obtained preliminary dendrochrono- logical results and radiocarbon dates indicate that these “stumps” are indeed precontact in age, and that some of them date back to at least the beginning of the second millennium ad.
    [Show full text]
  • Tools and Technology
    TOOLS AND TECHNOLOGY Developed by Barclay Kopchak Developed by Leslie Fogg A Publication of Chugachmiut Heritage Preservation Department 1840 Bragaw Street, Suite 110, Anchorage, AK 99508-3463 With support from US Department of Education, ANE Grant #S356AQ09090054-10 We would like to thank the following people and institutions for their contribution: Leslie Fogg, Pua Weichart, Virginia Lacy, Johnny Moonin, Cordova Historical Museum, The National Museum of Natural History at the Smithsonian Institute, Holly Nordlum at Naniq Design, and Great Originals. TOOLS AND TECHNOLOGY Copyright © Chugachmiut, 2013. Produced by the Chugachmiut Heritage Preservation Department, under the supervision of Helen Morris, with assistance from Rhoda Moonin, Barclay Kopchak, Jed Palmer, Hanna Eklund, Helen Loescher and Bernice Tetpon. Copies of this publication can be ordered from: Chugachmiut Heritage Preservation Department 1840 Bragaw Street, Suite 110, Anchorage, Alaska 99508 Tel: 907-562-4155 Fax: 907-563-2891 www.chugachmiut.org Funded by the United States Department Education, ANA Grant Number S356A090054. Other Heritage Kits available: Abundance of Birds , Medicinal Plants, They are Hunting, Sugpiaq Clothing, Driftwood, Grass and Plant Fibers, Honoring the Seal, Native Trade and Change, Storytelling , Gathering Plants to Eat, Ancestry, Our Foods from the Sea, Symbols, Wamluk – Let’s Play, Alutiiq Hunting Hats, Traditional Fishing. Table Of Contents OVERVIEW ...............................................................................................................................................................
    [Show full text]
  • Handtools for Trail Work Forest Service
    United States In cooperation Department of with Agriculture Handtools for Trail Work Forest Service Technology & 2005 Edition Development Program 2300 Recreation February 2005 0523–2810P–MTDC You can order a copy of this document using the order form on the FHWA’s Recreational Trails Program Web site Notice at <http://www.fhwa.dot.gov/environment/rectrails/trailpub .htm>. This document was produced in cooperation with the Recreational Trails Program of the U.S. Department of Fill out the order form and submit it electronically. Transportation’s Federal Highway Administration in the interest of information exchange. The U.S. Government Or you may email your request to: assumes no liability for the use of information contained in [email protected] this document. Or mail your request to: The U.S. Government does not endorse products or manu- Szanca Solutions/FHWA PDC facturers. Trademarks or manufacturers’ names appear in 13710 Dunnnings Highway this report only because they are considered essential to Claysburg, PA 16625 the objective of this document. Fax: 814–239–2156 The contents of this report reflect the views of the authors, Produced by: who are responsible for the facts and accuracy of the data USDA Forest Service, MTDC presented herein. The contents do not necessarily reflect 5785 Hwy. 10 West the official policy of the U.S. Department of Transportation. Missoula, MT 59808-9361 This report does not constitute a standard, specification, or Phone: 406–329–3978 regulation. Fax: 406–329–3719 Email: [email protected] Web site: http://www.fs.fed.us/eng/pubs —Cover photo: The 1924 Trail Gang in the Flume, Courtesy of the Appalachian Mountain Club.
    [Show full text]
  • Bind Analysis & Cut Sequence
    Bind Analysis & Cut Sequence For Trainee Saw Operators and Saw Operators April 2017 75 Course Overview Types of Binds Types of Cuts General Considerations Hazard Tree Scenario 76 Types of Binds Top bind Bottom bind Side bind End bind Compound binds 77 Top Bind Bearing Point Bearing Point Top cut and finish from bottom – add pie cut if needed Top Bind Top cut and finish from bottom Top Bind Cut from Top and Wedge Top Bind (Wildland Fire Chain Saws, S-212 Video, National Wildfire Coordinating Group) Bottom Bind Bearing Point Underbuck – Then top cut – Be ready for lots of movement 82 Bottom Bind Cut at Bearing Point, when possible Bottom Bind Watch kerf as it opens during release cut Bottom Bind (Wildland Fire Chain Saws, S-212 Video, National Wildfire Coordinating Group) Side Bind Bearing Point Bearing Point Bearing Point Safely relieve bind on compression side PCTA - Safety & Review April 2017 86 Side Bind Cut at the point of compression if possible This is an example of what not to do… 87 Side Bind (Wildland Fire Chain Saws, S-212 Video, National Wildfire Coordinating Group) 88 End Bind Weight of log causes compressive forces ‐ use wedges End Bind (Wildland Fire Chain Saws, S-212 Video, National Wildfire Coordinating Group) End Bind Weight of log causes compressive forces - use wedges 91 Compound Binds Compound binds are a combination of two or more binds Binds can move and change during the cutting process Cutting the log reduces weight in sections and changes bind Moving bearing points changes binds Side binds usually transition to
    [Show full text]