BOLTLESS TM SYSTEM

RIMS AND

NO DOT ISSUES lock is a within a

BOLTLESS BEAD LOCK SYSTEM KIT FIG. 1 bead and the outside of the , mount the inside

lock lock To uninstall, see last page. Following are detailed instructions. https://www.coyoteents.com/installing-coyote-boltless-beadlocks-video/

INNER TUBE FIG. 2 AIR CHANNEL FIG. 3 lock

TREAD

ends are AIR CHANNEL

TREAD *SIDEWALLS*

BEADS PART NUMBER FITS TREAD OVERLAP CEB1478 14” dia. X 7” to 8” wide wheels CEB15710 15” dia. X 7” to 10” wide wheels CEB1546 15” dia. X 4” to 6” wide (SCORE, Class 11) CEB16710 16” dia. X 7” to 10” wide wheels CEB16.5710 16.5” dia. X 7” to 10” wide wheels BOLTLESS BEAD LOCK CASE FIG. 4 CEB17710 17” dia. X 7” to 10” wide wheels and rim

FIG. 5 5 rim

6m m (1/4”) gauges and

rim lock will

rim

FIG. 6

all

lock

Use the inside of the tire to contain the

FIG. 7 excess powder. We use a mortar boat. CHECK THE AIR CHANNEL GROMMET AND FIT: Check that the Air Channel rubber grommet is

Open Work Space

RIM rim Place BLOCK Beneath Tire creating Work Space Above Rim

rim

FIG. 8

rim outside

lock

FIG. 9 9 rim.

rim,

rim,

FIG. 10 10 lock

outside lock -

FIG. 12 FIG. 13

lock . and nut to the outside of the rim, and then secure, but do not tighten. Lift the over the Air Channel and rest it squarely back on the rim. The long end of the Air Channel will eventually end up between the beadlock Bead and the tire bead pointing into the tire’s main -

FIG. 14 rim

valve stems. The tire machine bead mounting tool should never cross over either valve .

lock

FIG. 12 12 Air Channel on the rim.

lock

FIG. 15 lock

lock ,

lock

possibly reinstallment.

lock

!

FIG. 11 11 First, completely deflate the tire and then the beadlock. You must deflate both to safely uninstall either. Remove both nuts and then push them into the rim (into the tire cavity). Taking care to not place the tool over either valve stem (preferably 180º across from them), break both tire beads. Ensuring that neither valve stem is stressed, dismount the outside tire bead taking the long way around as described in install step #13. Next, dismount the outside beadlock case Bead. Remove only the inner tube if that is the only thing to be replaced. Otherwise, remove the tube and then the beadlock case. If you are replacing the tire, dismount the inside tire bead. Reassembly starts at install step #7.

FIG. 16 16 STREET LEGALITY and SELLER/INSTALLER LIABILITY

lock

locks

aware! rims locks

INSTALLATION instructions and view the installation video completely before starting. Installation can be dangerous. Safety is always paramount!

in lock

locks

www com Coyote Enterprises LLC P.O. Box 12137 Costa Mesa, CA 92627 [email protected] 949.645.7733 - USA

www.COYOTEENTS.com

https://www.coyoteents.com/installing-coyote-boltless-beadlocks-video/