DOCSLIB.ORG

Technical Information for Cylindrical Curved Glass

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Technical Information for Cylindrical Curved Glass Technical information for cylindrical curved glass Cylindrical curved float glass Cylindrical curved insulating glass Min. radius 50 mm 100 mm Max. angle 180° 150° Max. dimensions girth x height/width girth x height/width 3210 x 8000 * 3210 x 8000 * * The table shows the max. theoretically possible dimensions. Sizes can vary depending on used glass (thickness/function) and shape. Min. dimensions on request on request Max. pitch 1200 mm moreover on request 1200 mm moreover on request Max. weight 2000 kg 2000 kg Glass thickness 2–19 mm 4–34 mm moreover on request Bendable glass • Low-iron extra-clear glass, e.g. Diamant (Saint-Gobain), see float glass types* Optiwhite (Pilkington) The following glass types can be used for the production • Tinted float glass (e.g. Parsol) of curved double glazed units: • Anti-reflective glass e.g. Amiran®, Conturan® (Schott AG) • Mirror with chrome coating MIRASTAR® (Saint-Gobain) • Solar control glass with hard coatings, e.g. ANTELIO, • Self-cleaning glass: Bioclean® (Saint-Gobain) COOL-LITE® ST, STOPSOL, Sunergy, Silverstar • Cast glass and rolled glass (with some limitations) Sunstop T or with combined solar and thermal control • Antique sheet glass coatings e.g. COOL-LITE®SKN*, SunGuard® HS, • Wired glass SunGuard® HP, SunGuard® Solar • Screen printed glass (screen print on the inside) • Heat protection glass • Decoration glass Planitherm Ultra N II (soft coating), • Frosted glass K-Glass (hard coating) • Mattfinished glass (partial or completely) • Acoustic protection glass compositions with "Stadip • Etched and sandblasted glass, also with CLEAR-SHIELD® Silence" (sound insulation interlayer) are also available • Bevelled glass • Safety termal insulating glass in connection with • Enamelled float glass he at protection, acoustic protection, sun protection • Shatter-resistant with security window films and special laminated safety glass combinations with • Partial or complete coverage with coloured glass different resistance class according to DIN EN 356 painting. Powder coating is also available. *Notice: The values listed under Technical Data are only for guidance. The geometrical parameters of a curved glass pane, the min./max. values of the parameters as well as the requested glass assembly are closely linked and influence the corresponding limiting values of each other. Limits of size, dimensions, possible glass thickness and bending angles are determined according to individual arrangement and thorough technical examination. Restrictions in the form of shape must be expected. Dimensional For all curved glass products manufactured in our company, the general tolerance and conditions in accordance to "Guideline tolerances for thermal bend architectural glass products ", BF-datasheet 009/2011 Revision index 1 - März 2017 from Bundesverband Flachglas e.V. and the"Guideline to Assess the Visible Quality of Glass Buildings." are valid (unless otherwise agreed in writing). Technical Remark: technical modifications and errors • Cavity width range: preferably 6–14 mm, max. 20 mm feasibility excepted! • Insulating glass gas filling: Argon, Krypton • Production with Super Spacer® TriSeal • Warm-edge-technology, thereby excellence features in thermal isolation • Glass compositions are depending on geometry • Special insulating glass for stepped-units with UV- resistant edge seal • The closer radius, smaller dimensions, the higher load on the edge seal because bending stiffness (less pumpable) • Performance data of glass compositions (light trans- mission, light reflection, energy transmission, energy reflection, UV-transmission and g-value) can only be mentioned according to values of comparable planar glass compositions (calculation with CALUMEN software) At the moment we are able to achieve a Ug-Value up to 1,0 W/m2K for double-glazed units in accordance with DIN EN 673. With an curved triple-glazed unit, even a Ug-value up to 0,5 W/m2 K in accordance with DIN EN 673 is possible. We produce insulating glass units in accordance with EN 1279. For more information of marking products please contact us. Site 1/2 Technical information for cylindrical curved glass Cylindrical curved Cylindrical curved laminated glass toughened glass/heat-strengthened glass Min. radius 100 mm 550 mm depending on thickness, size, shape, and function (coating etc.), moreover on request Max. angle 150° 90°, moreover on request Max. dimensions girth x height/width min. radius** girth x height/width 3210 x 8000 mm * ≥ 550 mm 1200 mm 2000 mm* ≥ 1100 mm 2400 mm 4200 mm* ≥ 1300 mm 2850 mm 5500 mm* ≥ 2000 mm 4300 mm 2800 mm* * The table shows the max. theoretically possible dimensions. The sizes can vary depending on used glass (thickness and function) and the shape. **Depe nding on thickness, size, shape and function (coating) etc. Min. dimensions on request 300 x 400 mm Max. pitch 1200 mm, moreover on request 400 mm Max. weight 2000 kg 2000 kg Glass thickness maximum glass size thickness according Toughened glass 4–12 mm (15 and 19 mm on request) to clients request Heat strengthened glass 4 –10 mm Bendable glass see float glass • Clear- and tinted float glass (Parsol) types* • Low-iron extra-clear glass Resistance class approved safety features GLABIE • Anti-reflective glass laminated glass (related to planar superstructures • Satined glass PVB-AF-Trosifol) • Patterned glass • Screen-printed and enamelled glass • impact-resistance (P1A–P5A)** (print only on concave side) • Heat protection glass (hard coating) K-Glass • manuel attack-resistance (P6B–P8B)** • Heat protection glass (soft coating) • bullet resistance (BR1S–BR4S)** SGG Planitherm Ultra N II • explosion resistance • Solar control glass (hard coating): SGG Antelio®, • laminated glass with built in alarm-wire • coloured laminated glass is also available • SentryGlas®interlayer • Solar control combined with thermal insulation in ** in reference to safety glazing standard DIN EN 356 one coating: Range: SGG COOL-LITE® SKN, SunGuard® HS, SunGuard® HP, SunGuard® Solar Laminated glass with SI foil achieve good sound insulation performance data, even as monolithic composition e.g. laminated glass 44.2 = 37 dB With laminated glass and 0,76 mm PVB foil edge shift be expected max. 1,5 mm/meter edge (max. 5 mm) *Notice: The values listed under Technical Data are only for guidance. The geometrical parameters of a curved glass pane, the min./max. values of the parameters as well as the requested glass assembly are closely linked and influence the corresponding limiting values of each other. Limits of size, dimensions, possible glass thickness and bending angles are determined according to individual arrangement and thorough technical examination. Restrictions in the form of shape must be expected. Dimensional For all curved glass products manufactured in our company, the general tolerance and conditions in accordance to "Guideline tolerances for thermal bend architectural glass products ", BF-datasheet 009/2011 from Bundesverband Flachglas e.V. and the "Guideline to Assess the Visible Quality of Glass in Buildings." are valid (unless otherwise agreed in writing). Technical For our standard laminated glass as safety glass, we use • Heat-soak tested fully tempered (toughened) feasibility clear foil with a thickness of 0.76 mm. Also multiple safety glass layers of Polyvinylbutyral (PVB)-foil and glass are available. • Fire resistant glass (in cooperation) On request, we can also process coloured laminated • Alarm Securit® safety glass. • Thermovit – heatable glass It's possible to manufacture curved tempered glass, curved tempered glass with heat-soak test and curved heat-strengthened glass into laminated safety glass and insulated glass to meet every safety and security specification. Site 2/2 03.2019 • Remark: technical modifications and errors excepted!.
Load more

Recommended publications
  • Photonic Glass-Ceramics: Consolidated Outcomes and Prospects Brigitte Boulard1, Tran T
    Photonic glass-ceramics: consolidated outcomes and prospects Brigitte Boulard1, Tran T. T. Van2, Anna Łukowiak3, Adel Bouajaj4, Rogéria Rocha Gonçalves5, Andrea Chiappini6, Alessandro Chiasera6, Wilfried Blanc7, Alicia Duran8, Sylvia Turrell9, Francesco Prudenzano10, Francesco Scotognella11, Roberta Ramponi11, Marian Marciniak12, Giancarlo C. Righini13,14, Maurizio Ferrari6,13,* 1 Institut des Molécules et Matériaux du Mans, UMR 6283, Equipe Fluorures, Université du Maine, Av. Olivier Messiaen, 72085 Le Mans cedex 09, France. 2 University of Science Ho Chi Minh City, 227 Nguyen Van Cu, Dist.5, HCM Vietnam. 3 Institute of Low Temperature and Structure Research, PAS, ul. Okolna 2, 50-950 Wroclaw, Poland. 4 Laboratory of innovative technologies, LTI, ENSA–Tangier, University Abdelmalek Essaâdi, Tangier, Morocco. 5 Departamento de Química, Faculdade de Filosofia, Ciências e Letras de Ribeirão Preto, Universidade de São Paulo - Av. Bandeirantes, 3900, CEP 14040-901, Ribeirão Preto/SP, Brazil 6 CNR-IFN, CSMFO Lab., Via alla Cascata 56/c, Povo, 38123 Trento, Italy. 7 Université Nice Sophia Antipolis, CNRS LPMC, UMR 7336, 06100 Nice, France. 8 Instituto de Ceramica y Vidrio (CSIC), C/Kelsen 5, Campus de Cantoblanco, 28049 Madrid, Spain. 9 LASIR (CNRS, UMR 8516) and CERLA, Université Lille 1, 59650 Villeneuve d’Ascq, France. 10 Politecnico di Bari, DEI, Via E. Orabona 4, Bari, 70125, Italy. 11 IFN-CNR and Department of Physics, Politecnico di Milano, p.zza Leonardo da Vinci 32, 20133 Milano, Italy 12 National Institute of Telecommunications, 1 Szachowa Street, 04 894 Warsaw, Poland. 13 Centro di Studi e Ricerche “Enrico Fermi”, Piazza del Viminale 2, 00184 Roma, Italy. 14 MipLAB. IFAC - CNR, Via Madonna del Piano 10, 50019 Sesto Fiorentino, Italy.
    [Show full text]
  • PDF Exhibitor Testimonials
    glasstec 2018 – Exhibitor Quotes SCHOTT AG The 25th glasstec was a special highlight for SCHOTT. A new booth concept invited visitors to discover and experience glass. Our feedback was excellent both quantitatively and qualitatively. And, of course, glasstec again offered a perfect platform for networking." Salvatore Ruggiero, Vice President Marketing and Communication, SCHOTT AG NSG Pilkington NSG Group, the owner of the Pilkington brand, celebrated a very successful exhibition at glasstec 2018. But this success was not the only reason for celebration – this year is also the Group’s 100th anniversary as well as glasstec’s 25th. “The Glasstec event presented the dynamic evolution of glass applications in the world and we were very pleased to be part of such a successful show. Visitors were able to view a wide range of design options and realise the enormous development in dynamic façade solutions, which, by focusing on energy generation, enable building designers to enhance inhabitants’ comfort and well-being. “This is the generation of products for today and tomorrow and NSG Group presented a variety of products, which are fulfilling these “future” market demands. glasstec 2018 was an excellent platform on which to showcase the Group’s capabilities to the world.” Sing Koo, Managing Director Germany & VA Manager Europe Merck KGaA This year, Merck joined Glasstec for the first time. After the opening of our production plant in Veldhoven, The Netherlands, nearly one year ago, we found with Glasstec the right platform to successfully launch our new brand for dynamic liquid crystal windows EYRISE™ as well as our new product for dynamic solar control EYRISE™ s350 into the market.
    [Show full text]
  • ZERODUR® K20 Glass Ceramic with Low Thermal Expansion for High Temperature Applications
    ZERODUR® K20 Glass ceramic with low thermal expansion for high temperature applications Product Information The high temperature ZERODUR® K20 glass ceramic material contains a crystal phase of more than 90 % Keatite, pro- duced by thermal transformation from the semitransparent ZERODUR® material. ZERODUR® K20 can be used at higher application temperatures compared to ZERODUR®. The material has high tem- perature stability and low thermal ex- pansion and does not change its proper- ties during multiple temperature cycles. Properties • Low coefficient of thermal expansion together with high longterm tempe- rature stability up to 850 °C • Can be matched with low thermal Forms of Supply expansion metal alloys, e. g. Invar® • Complex, customized CNC-manufactured products • Excellent homogeneity and in ternal • Serial production and prototype manu facturing quality • A remission of more than 90 % in the Properties ZERODUR® K20 ZERODUR® visible with a matt brilliant white finish Density [g/cm3] 2.53 2.53 • Free of pores and polishable to very Young’s Modulus E [GPa] 84.7 90.3 low surface roughness levels • Large-scale parts can be produced Poisson’s Ratio µ 0.25 0.24 with dimensions in the meter range Knoop Hardness [HK 0.1/20] 620 620 Expansion Coefficient (20 – 700 °C) [10–6/K] 2.4 0.2 Applications Expansion Coefficient (20 – 300 °C) [10–6/K] 2.2 – • Mechanical and optical components 0 ± 0.007 within high energy laser systems 0 ± 0.010 • Diffuse reflectors for laser-cavities Expansion Coefficient (0 – 50 °C) [10–6/K] 1.6 0 ± 0.020 • Mold material in hot forming pro cesses 0 ± 0.050 0 ± 0.100 (glass, plastic etc.) 0.90 • High precision manufactured compo- Heat Capacity c (20 °C) [J/(gK)] 0.80 p (extrapolated) nents Thermal Conductivity (90 °C) [W/(mK)] 1.63 1.46 • Ceramic engine components • Calibration standards for optical and Max.
    [Show full text]
  • SCHOTT Technical Glasses
    SCHOTT Technical Glasses Physical and technical properties Foreword part from its application in optics, glass as a technical material exerted a A formative influence on the development of important technological fields such as chemistry, pharmaceutics, automotive, optoelectronics and renewable energy such as solar thermal or photovoltaics. Traditional areas of technical application for glass, such as laboratory apparatus, flat panel displays and light sources with their various requirements on chemicophysical properties, led to the development of a great variety of special glass types. By new fields of application, particularly in optoelectronics, this variety of glass types and their modes of application have been continually enhanced, and new forming processes have been developed. The hermetic encapsulation of electronic components gave decisive impetus to development activities. Finally, the manufacture of high-quality glass ceramics from glass has opened entirely new dimensions, setting new standards for various technical applications. To continuously optimize all commercial glasses and glass articles for existing applications and to develop glasses and processes for new applications is the constant endeavor of SCHOTT research. For such dynamic development it is mandatory to be in close contact with the customers and to keep them as well informed as possible about glass. SCHOTT Technical Glasses offers pertinent information in concise form. It contains general information for the determination and evaluation of important glass properties and also informs about specific chemical and physical characteristics and possible applications of the commercial technical glasses produced by SCHOTT. With this brochure we intend to assist scientists, engineers, and design- ers in making the appropriate choice and optimum use of SCHOTT products.
    [Show full text]
  • 3Rd Annoucement.Indd
    INTERNATIONAL COMMISSION ON GLASS ICG 2007 XXIst International Congress on Glass STRASBOURG July 1-6, 2007 Palais des Congrès Strasbourg France « rdAnnouncement www.icg2007.org and preliminary program 3 1/24 ICG 2007 PRELIMINARY LIST OF SPONSORS THE INTERNATIONAL COMMISSION ON GLASS « The International Commission on Glass (ICG) was founded in 1933 with the purpose of promoting international collaboration and facilitating the exchange of information within the glass community. Nowadays, it gathers reknown universities, scientific establishements, glass industries as well as suppliers. The ICG leads technical committees upon different aspects of glass science and technology. One of the ICG’s projects is organising the triennial International Congress on Glass. The event was last held in France in 1971. Hervé Arribart Jean-Pierre Houdaer ICG President Congress Chairman ICG 2/24 3/24 ICG 2007 2007 THE CONGRESS THE COMMITTEES « « INTERNATIONAL CONFERENCE CHAIRMAN The up-coming International Congress on ADVISORY BOARD Jean-Pierre Houdaer Glass 2007 will take place in Strasbourg from M. Aegerter (Inst. für Neue Materialen, Germany) (Glass Expert, Formerly Directeur Général, 1st to 6th July 2007. R. Akçakaya (Şişecam, Turkey) Institut du Verre, France) R. Almeida (IST Lisbonne, Portugal) This triennial event, organized under the M.H. Chopinet (Saint-Gobain, France) SCIENTIFIC COMMITTEE auspices of the International Commission on M. Delaney (Owens-Illinois, USA) Glass (ICG) will bring together key players in N. Greaves (Univ. of Wales, United Kingdom) R. Vacher (CNRS, France), Chairman glass science, technology and production: R. Hand (Sheffield Univ., United Kingdom) H. Arribart (Saint-Gobain, France) glass manufacturers, providers, researchers, K. Hirao (Kyoto Univ., Japan) K.
    [Show full text]
  • SCHOTT History: Historical & Technological Milestones
    SCHOTT History Historical and Technological Milestones 1 2 3 Historical Milestones 1884 Otto Schott, Ernst Abbe and Carl and Roderich Zeiss found the Schott & Associates Glass Tech- nology Laboratory in Jena, Germany. 1889 1889 Ernst Abbe founds the Carl-Zeiss-Stiftung (Carl Zeiss Foundation). 1891/1919 The glassworks in Jena become a foundation- owned enterprise. Its sole owner is the Carl- Zeiss-Stiftung. 1900 Export share already about 50%. 1927/1930 The first subsidiaries: Farbenglaswerk Zwiesel (1927), Deutsche Spiegelglas AG (DESAG) in Grünenplan (1930), Glaswerk Mitterteich (1930). 1945 “The Odyssey of 41 Glass makers”: After the end of World War ll, American troops bring the management and selected experts from Jena to West Germany. 1948 The original factory in Jena (Soviet zone of occupation/GDR as of 1949) is expropriated and converted into a state-owned company (VEB). 1952 The foundation enterprise is rebuilt in Mainz (Federal Republic of Germany) under the direction of Erich Schott, the son of the company’s founder. 1. Otto Schott 2. Ernst Abbe 3. Original plant in Jena 4. Restart in Mainz 4 5 5. Erich Schott 1952 Mainz becomes the head quarters and main production site of the SCHOTT Group. 1954 First production subsidiary outside of Germany (Vitrofarma in Rio de Janeiro, Brazil). As of 1963 Establishment of production plants and sales offices in Western and Southern Europe. A sales office is opened in the U.S. (New York City). SCHOTT grows to become an international group of companies. 1966 First sales office in Asia (Tokyo). 1969 First production plant in the U.S.
    [Show full text]
  • SCHOTT – Ultra Low Expansion Glass Ceramic ZERODUR® Improvements in Properties, Understanding and Production
    SCHOTT – Ultra low expansion glass ceramic ZERODUR® Improvements in properties, understanding and production MPI für Astronomie, Heidelberg Astro Tech Talk 30.1.2015 Peter Hartmann SCHOTT AG Advanced Optics 2 What is ZERODUR®? 2 Advanced Optics 3 1957 Glass Ceramic discovered by Donald S. Stookey (Corning) From mishap during development of light sensitive glass Furnace became much too hot. Advanced Optics 4 ZERODUR®– Work of Two Pioneers The first 4 m Zerodur Mirror 3,6 m Telescope Calar Alto Hans Elsässer Jürgen MPI Astronomy Petzold Initiator and SCHOTT Customer Developer of glass ceramics 1973 Cast of the first 4 m glass ceramic mirror blank for the Max-Planck-Insitute for Astronomy Heidelberg Germany Advanced Optics 5 ZERODUR® - Zero Expansion Glass Ceramic Zerodur is a Li-Al-Si glass ceramic a composite of 70 – 78 vol-% microcrystallites embedded in a glass phase Size and number of the negative CTE microcrystallites are adjusted to achieve a net zero thermal expansion Scanning microscope image of Zerodur microcrystallites Size: 30 – 50 nm Advanced Optics 6 ZERODUR® is molten like Optical Glass Therefore it is . Extremely homogeneous . Isotropic down to sub microscopic scale Free from rings, layers Seams, flaws, pores . Highly polishable . In transmission inspectable no surprises . Highly reproducible 1.5 m Blank with outstanding in all properties homogeneity and striae quality Advanced Optics 7 Coefficient of thermal expansion CTE 7 Advanced Optics 8 Coefficient of Thermal Expansion (CTE) Narrower tolerances have been added CTE Absolute Values New Class CTE [1/K] Class CTE [1/K] 2 ± 0.10 · 10-6 0 Special ± 0.010 · 10-6 1 ± 0.05 · 10-6 0 Extreme ± 0.007 · 10-6 0 ± 0.02 · 10-6 Taylored Adapted to specific temperature profile Advanced Optics ZERODUR® TAILORED 9 The CTE at a specific temperature T might differ from the mean value determined by the slope of the expansion between 0° and 50°C.
    [Show full text]
  • ZERODUR : Deterministic Approach for Strength Design
    ZERODUR®: deterministic approach for strength design Peter Hartmann Downloaded From: http://opticalengineering.spiedigitallibrary.org/ on 01/04/2013 Terms of Use: http://spiedl.org/terms Optical Engineering 51(12), 124002 (December 2012) ZERODUR®: deterministic approach for strength design Peter Hartmann Abstract. There is an increasing request for zero expansion glass SCHOTT AG ceramic ZERODUR® substrates being capable of enduring higher opera- D-55122 Mainz, Germany tional static loads or accelerations. The integrity of structures such E-mail: [email protected] as optical or mechanical elements for satellites surviving rocket launches, filigree lightweight mirrors, wobbling mirrors, and reticle and wafer stages in microlithography must be guaranteed with low failure probability. Their design requires statistically relevant strength data. The traditional ap- proach using the statistical two-parameter Weibull distribution suffered from two problems. The data sets were too small to obtain distribution parameters with sufficient accuracy and also too small to decide on the validity of the model. This holds especially for the low failure probability levels that are required for reliable applications. Extrapolation to 0.1% fail- ure probability and below led to design strengths so low that higher load applications seemed to be not feasible. New data have been collected with numbers per set large enough to enable tests on the applicability of the three-parameter Weibull distribution. This distribution revealed to provide much better fitting of the data. Moreover it delivers a lower threshold value, which means a minimum value for breakage stress, allowing of removing statistical uncertainty by introducing a deterministic method to calculate design strength. Considerations taken from the theory of fracture mechan- ics as have been proven to be reliable with proof test qualifications of del- icate structures made from brittle materials enable including fatigue due to stress corrosion in a straight forward way.
    [Show full text]
  • SCHOTT Specialty Glass for More Than 130 Years Our Competence Lies in the Areas of Specialty Glass and Glass-Ceramics
    Discover SCHOTT Specialty glass for more than 130 years Our competence lies in the areas of specialty glass and glass-ceramics. The company’s founder Otto Schott is considered the founder of the specialty glass industry. Since Otto Schott, innovations have always been a part of SCHOTT’s DNA. Innovations in specialty glass 1884 Optical glasses 1887/1893 Invention of borosilicate glass 1911 FIOLAX® glass tubing for pharmaceutical packaging 1939 Glass-to-metal seals 1964 Fiber optic components for light and image guides 1968 ZERODUR® glass-ceramic for telescope mirror substrates 1973 CERAN® glass-ceramic cooktop panels 1994 BOROFLOAT® Borosilicate glasses with the microfloat process 2002 NEXTERION® coated substrates for Microarrays 2009 Xensation® Cover glass for touch applications 2016 Ultra-thin glass was awarded the German Industry Innovation Award 2017 iQTM platform for pharmaceutical packaging Innovations in specialty glass Coated optical More than Optical glasses Filter glasses Laser glass glasses 120 optical 1884 1900 1974 1938 glasses Fiber optics components 1964 PYRAN® BOROFLOAT® NEXTERION® Borosilicate glass FIOLAX® Ampoules 1978 1994 2002 1887/1893 1911 1923 Glass-to-metal seals Ceramic-to-metal seals 1939 2001 SCHOTT Aluminosilicate Thin glass Xensation® Ultra-thin glass AS 87 eco glass 1993 2009 2013 2017 Glass-ceramics ZERODUR® CERAN® ROBAX® NEXTREMA® CERAN Miradur® 1965 1968 1973 1979 2011 2017 Historic milestones 1884 Founding of the company in Jena 1889 Ernst Abbe founds the Carl Zeiss Foundation 1891/1919 SCHOTT becomes a foundation company Sole owner: the Carl Zeiss Foundation 1948 After World War II the original factory in Jena was expropriated and the company was divided into east and west 1952 Rebuilding of the foundation company in Mainz, Mainz becomes the headquarters of the SCHOTT Group As of 1963 Continuous internationalization 1991/1995 After German Reunification, SCHOTT also seized the opportunity to reunification.
    [Show full text]
  • Technical Program Overview Keynote Talks @ 45 Mins + Discussion of Each Talk @ 30 Mins
    Functional Glasses: Properties and Applications for Energy & Information January 6-11, 2013, Siracusa, Sicily, Italy Technical Program Overview Keynote Talks @ 45 mins + Discussion of each talk @ 30 mins Monday, January 7, 2013 1. Morning Session: Applications of Glass in Energy Technology Broad Topic: Lighting Speaker: Dr. Mehran Arbab, Director of Research and Technology, Glass and Fiber Glass, PPG Industries, USA, 'Integrated Glass Substrates for OLED Lighting' Discussion Leader: Dr. Klaus Bange, (Ex-Schott), MK Consulting, GmbH, Germany Broad Topic: Photovoltaics Speaker: Dr. Sener Oktik, President, Research and Technological Development, Sisecam, Turkey, “Photovoltaic Industry & Role of Glass for Reducing the Cost of Solar Energy" Discussion Leader: Dr. Driss Lamine, Project Manager, Saint Gobain, France Broad Topic: Coatings Speaker: Dr. Joachim Deubener, Professor and Director of Institute of Non-Metallic Materials, Clausthal University of Technology, Germany, “Alterations of Glass Surfaces & Functional Coatings for Energy Conversion Systems” Discussion Leader: Dr. Roland Langfeld, Research Fellow, Schott AG, Germany. 2. Afternoon Session: Applications of Glass in Information Technology Broad Topic: Roll-to-roll thin glass Speaker: Dr. Sean Garner, Scientist, Corning, USA. “Ultra-Slim Flexible Glass for Electronic Applications “ Discussion Leader: Dr. Richard Brow, Curators' Professor, Dept. of Materials Science & Engineering, Missouri Broad Topic: Fiber Speaker: Dr. Philip Russell, Director, Max Planck Inst. for the Science of Light, Erlangen, Germany, "Microstructured Optical Fibres: Opportunities and Challenges" Discussion Leader: Dr. Younes Messaddeq, Professor, Dept of Physics, Engineering Physics and Optics, Laval Uni., Canada. Also Canada Excellence Research Chair in Enabling Photonic Innovations for Information and Communication Broad Topic: Transparent Conductive Materials Speaker: Dr. Driss Lamine, Project Manager, Saint Gobain, France, “A general introduction for the use and needs of TCMs in glass industry".
    [Show full text]
  • Springer Handbook of Glass
    Springer Handbook of Glass Springer Handbooks provide a concise compilation of approved key information on methods of research, general principles, and functional relationships in physical and applied sciences. The world’s leading experts in the fields of physics and engineering will be as- signed by one or several renowned editors to write the chapters com- prising each volume. The content is selected by these experts from Springer sources (books, journals, online content) and other systematic and approved recent publications of scientific and technical information. The volumes are designed to be useful as readable desk book to give a fast and comprehensive overview and easy retrieval of essential re- liable key information, including tables, graphs, and bibliographies. References to extensive sources are provided. HandbookSpringer of Glass J. David Musgraves, Juejun Hu, Laurent Calvez (Eds.) With 1450 Figures and 224 Tables HK Editors J. David Musgraves Rochester Precision Optics, LLC West Henrietta, NY, USA Juejun Hu Dept. of Materials Science and Engineering Massachusetts Institute of Technology Cambridge, MA, USA Laurent Calvez UMR 6226 – Institut des Sciences Chimiques de Rennes University of Rennes I Rennes, France ISBN 978-3-319-93726-7 e-ISBN 978-3-319-93728-1 https://doi.org/10.1007/978-3-319-93728-1 © Springer Nature Switzerland AG 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed.
    [Show full text]
  • Glass-Ceramics and Realization of the Unobtainable: Property Combinations That Push the Envelope
    Glass-ceramics and realization of the unobtainable: Property combinations that push the envelope Mark J. Davis and Edgar D. Zanotto , Guest Editors Materials designed and engineered for technical applications must invariably meet or exceed multiple key specifi cations. Even if commercial realization is not intended, scientifi c interest is piqued if a challenging combination of properties is achieved, particularly if they are mutually exclusive for certain classes of materials. For example, the combination of mechanical toughness, chemical durability, and high thermal-shock resistance, with pore-free, smooth, aesthetically beautiful surfaces simultaneously realized in certain glasses that are crystallized in a controlled manner—glass-ceramics—have enabled two distinct, decades- long applications, cookware and fl at cooktop panels. Other special glass-ceramic materials have been developed for electronic, photonic, dental, and biomedical applications. No other class of material could combine these properties in such an advantageous and economically feasible manner. This issue highlights six very different innovative applications of glass- ceramics, all of which owe their importance and continuing interest to “hard-to-combine” properties. Introduction with granite, a classic example. However, to the glass-ceramic Materials undergo some type of fundamental change during researcher, either academic or industrial, the chemistry and preparation from the raw materials to their fi nal state. Prepared realized crystal phases are far less constrained than they metals and ceramics date back nearly 12,000 years. Glassmaking are in the natural world. So too are the resulting physical, dates back about one-half of that timespan, 4500 to 6000 years, chemical, and optical properties. Figure 1 2 shows an optical whereas polymers, semiconductors, and graphene, for instance, micrograph of a glass-ceramic containing one crystal phase are more recent additions, less than a century or even recent dispersed in a residual glass matrix.
    [Show full text]