www.samsondoors.co.uk 0800 328 6250 www.samsondoors.co.uk Colours & Powder Coating

INTRODUCTION Polyester powder coating is a surface finish applied to shutters and retractable gates in a solid, powder form after careful pre- Cream Brown Black White Brilliant White treatment of the surface. The coating is fused by heat to produce RAL 1015 RAL 8014 RAL 9005 RAL 9010 RAL 9016 a continuous film and curing of the coating gives its design properties. The result is a high performance finish that delivers exceptional corrosion protection, durability and resistance to yellowing making it suitable for both interior and exterior use. The process is virtually emission free, so is environmentally friendly.

FEATURES ■ Typically 60-80 Microns coating thickness Beige Oyster White Gentian Blue Light Blue Moss Green Anthracite Pale Grey RAL 1001 RAL 1013 RAL 5010 RAL 5012 RAL 6005 RAL 7016 RAL 7035 ■ Excellent corrosion protection ■ Superior colour stability ■ Tough yet highly flexible Extruded profiles and the aluminium shutter box profiles are powder coated in a satin finish (unless stated otherwise). Agate Grey Chestnut Brown Chocolate Brown Grey White Graphite Black Grey Beige RAL 7038 RAL 8015 RAL 8017 RAL 9002 RAL 9011 RAL 1019 GLOSS LEVELS Gloss (80% +⁄-5%): A highly reflective smooth surface. Gloss surfaces due to their highly reflective appearance tend to highlight surface imperfections.

Satin (65% +⁄-5%): A satin finish is not as reflective as the gloss Iron Grey Graphite Grey Grey Brown Traffic Black Grey Goose Brown finish and because of this is less likely to show any surface RAL 7011 RAL 7024 RAL 8019 RAL 9017 BS 00A005 BS 08B29 imperfections. Satin finishes also provide a good surface for cleaning and resisting abrasion. Unless stated otherwise this is the standard finish supplied. Matt (30% +⁄-5%): A matt finish due to the low gloss level is very good at concealing surface imperfections. Due to the textured finish the surface is more difficult to clean than a surface with a higher gloss level. Ivory Oxide Red Royal Blue Navy Blue Pale Blue Fir Green Pale Green Dark Grey Pale Grey Clay Brown Red Brown Mahogany PAINT RAL 1014 RAL 3009 RAL 5002 RAL 5011 RAL 5015 RAL 6009 RAL 6021 RAL 7015 RAL 7047 RAL 8003 RAL 8012 RAL 8016 For repairing minor blemishes to the finish surface touch-up paint is available Touch-up paint pot (25ml) Code: PC100P0

NOTES: Off White Signal Black Papyrus White Sand Yellow Olive Yellow Signal Blue Grey Blue Pigeon Blue Water Blue Ochre Brown Silk Grey All colours are supplied in Satin as standard, Matt & Gloss are RAL 9001 RAL 9003 RAL 9004 RAL 9018 RAL 1002 RAL 1020 RAL 5005 RAL 5008 RAL 5014 RAL 5021 RAL 8001 RAL 7044 available. Bands Standard, A and B are available on gates as standard. Other RAL and BS colours are available, please contact your Account Manager for further details.

Please note: We cannot powder coat SeceuroShield 150.

Green Beige Dafodil Yellow Yellow Signal Orange Signal Red Dark Red Traffic Red Dark Blue Capri Blue Ocean Blue Leaf Green Black Olive RAL 1000 RAL 1007 RAL 1018 RAL 2010 RAL 3001 RAL 3011 RAL 3020 RAL 5003 RAL 5019 RAL 5020 RAL 6002 RAL 6015 To see the full colour bands with the full range available visit www.sws.co.uk/ral-colour-chart

May Green Mint Turquoise Telegrey Olive Brown Ornage brown Lemon Yellow Night Blue Distant Blue Roseda Green Copper Brown Beige Brown Poppy Red RAL 6017 RAL 6033 RAL 7046 RAL 8008 RAL 8023 RAL 1012 RAL 5022 RAL 5023 RAL 6011 RAL 8004 RAL 8024 BS 04E53

www.samsondoors.co.uk 0800 328 6250 www.samsondoors.co.uk