------PRODUCT DATASHEET Calix -48C r2 Sealed Access Node

DESCRIPTION The Calix E3-48C r2 Sealed Access Node provides 48 VDSL2/ADSL2+ with integrated POTS (VoIP) subscriber ports which may be easily deployed in networks using fiber or copper transport uplinks. The Calix E3-48C r2 supports up to eight bonded VDSL2 ports or two 10GE SFP+ and three GE SFP uplinks. With support for SIP and H.248 VoIP protocols, the E3-48C r2 is a cost effective way to retire legacy TDM DLCs and transform the network from TDM to all IP. The E3-48C r2 provides VDSL2 vectoring on both the copper trunk interfaces as well as the subscriber pairs ensuring the best possible performance over existing copper infrastructure.

KEY ATTRIBUTES

DSL AND POTS INTERFACE DENSITY: The Calix E3-48C r2 COPPER BONDED SERVICES/TRANSPORT: The Calix E3-48C Sealed Access Node is equipped with 48 VDSL2 / ADSL2+ r2 enables service providers to deliver high bandwidth symmetric Fallback subscriber ports. The E3-48C r2 optimizes subscriber services to subscribers utilizing copper bonding in locations where VDSL2 performance by supporting vectoring to ensure the best fiber may not be available. The E3-48C r2 delivers up to 8 bonded possible performance over existing copper infrastructure. The pairs per subscriber for high bandwidth services or these bonded E3-48C r2 units support 48 analog POTS ports for VoIP based pairs may be used to connect to a next E3-48C r2 hop location for services. The unit supports pair bonding in both ADSL2+ and transport. VDSL2 modes across all 48 ports enabling any port(s) to be bonded with any port(s). VECTORING: The E3-48C r2 supports VDSL2 Unit Level Vectoring as well as System Level Vectoring, through an external INTEGRATED HIGH-CAPACITY UPLINKS: The Calix E3- Vector Control Processor, to scale vectored VDSL2 nodes up to 48C Sealed Access Node is unique in its ability to support 8 pair 192 ports. Vectoring reduces crosstalk to maximize bandwidth vectored bonded uplinks or 2*10GE MSA compliant SFP+ and ensuring the highest VDSL2 subscriber services over copper 3*1GE/2.5GE MSA compliant SFP interfaces in a single unit, outside plant wiring. ensuring the best possible uplink performance over both copper and fiber networks. When utilizing copper uplinks, the E3-48C MANAGEMENT: The Calix E3-48C r2 Sealed Access Node r2 can be daisy chained from an E7 or another E3-48C r2. When provides GUI and CLI craft interfaces, and SNMP based using fiber uplinks, the unit can be daisy chained, ringed or management as well as full FCAPS management via Calix aggregated to a single device in the network such as the Calix Management System (CMS). C7, E7 or another E3-48C. The E3-48C r2 also supports GPON uplinks to an E7 GPON OLT providing simultaneous support of INDUSTRY STANDARDS COMPLIANCE: The Calix E3-48C r2 both single-family and multi-family dwelling applications over a Sealed Access Node is designed to comply with all applicable single optical distribution network. ADSL/VDSL2 ITU standards including G.992.1(ADSL/G.dmt), G.992.2 (G.Lite), G.992.3/4(ADSL2), G.992.5 (ADSL2+), The Calix E3-48C r2’s ability to support both copper and fiber G.9923.2 (VDSL2), G.994.1 (G.hs), G.998.2 (VDSL2 Pair uplinks ensures the utmost is service provider flexibility and Bonding), G.998.1 (ATM-based multi-pair bonding), G.998.4 reuse, eliminating the need to replace a unit when upgrading (G.INP), and ANSI T1.413, interoperating with a wide range of locations to fiber transport. CPE.

For GPON access networks, the E3-48C r2, when configured with a GPON interface, supports ITU-T G.984 and G.988 standards.

------

------SPECIFICATIONS Calix E3-48C r2 Sealed Access Node

MINIMUM SOFTWARE RELEASE POWER SPECIFICATION COMPLIANCE Calix E7/E3-48 Release 2.6 Power consumption: 150 Watts NEBS Level 1 and 3 [Telcordia GR-1089 and GR-63 CORE] PORTS STANDARDS AND RFC SUPPORT Telcordia GR-63 CORE, Network 48 Ports VDSL2/ADSL2+ fallback Broadband Forum TR-101 Equipment Building system 48 Ports POTS/VoIP Broadband Forum TR-114 Telcordia GR-78 CORE, Generic Physical 8 Ports VDSL2 bonded uplink “VDSL2 Performance Test Plan” Design Requirements for 3 SFP sockets at 1GE/2.5GE rates DHCP Relay, and Layer 2 DHCP Relay w/ Telecommunications Products and 2 SFP+ sockets at 1GE/10GE rates DHCP Option 82 insertion Equipment 1 Vector control interface port IEEE 802.1ad QinQ (Provider Bridges) Telcordia GR-1089-CORE (Sect. 7) for IEEE 802.1AX / 802.3ad Link Electrical Safety GPON CHARACTERISTICS Aggregation Telcordia GR-3108 Class 4 and GR-2834 Max. split: 64 GPON IEEE 802.1p Prioritization Immersion Testing Max. reach: 58km (36 miles) w/C+/FEC IEEE 802.1Q VLAN Tagging UL-60950, Standard for Safety, Issue 1, Max. Attenuation: IEEE 802.1w Rapid Spanning Tree April 1, 2003 GPON Class B+, 28 dB (RSTP) FCC 47 CFR (ICES-003) Part 15 Class A GPON Class C+, 32 dB IETF RFC 2684 bridged encapsulation (Line/Remote Power) and Class B (AC 1490 + 10nm optical receiver: IETF RFC 4562 MAC-Forced Forwarding and -48vDC) –27.0 to -8.0 dBm IGMPv2 Snooping 1310 + 20nm optical transmitter: PPPoA to PPPoE conversion, and PPPoE POTS IMPEDANCE 0.5 to 5.0 dBm Intermediate Agent 900  + 2.16  Secured Management access per HTTPS PHYSICAL DIMENSIONS and SSHv2 SUBSCRIBER LOOP LENGTH Width: 17in (43.2cm) SNMPv2c and SNMPv3 1830  including 430 telset Depth: 6in (15.2 cm) Height: 23.2 in (58.9cm) MAXIMUM DATA RATES RINGING VDSL2: up to 140MBps downstream, 15 REN/card ring WEIGHT 60Mbps upstream (profile 17a). 5 REN at 1400  48.0 lbs. (21.77kg) net weight VDSL2 Bonding (2 pairs): Aggregate data 51.91 lbs. (23.54 kg) with 5-pin rate: up to 250Mbps downstream, RING VOLTAGE protectors 120Mbps upstream (profile 17a) Balanced 86 Volts AC at 20Hz Profile 8a/b/c/d: up to 80Mbps OPERATING ENVIRONMENT downstream, 20 Mbps upstream LOOP CURRENT Temperature: –40°C to +65°C Profile 12a/b: up to 100Mbps During normal operation: 25mA (–40°F to +149°F) downstream, 30 Mbps upstream During battery backup: 18mA Humidity: 10 to 95% (non-condensing) VDSL2 Bonding (8 pairs): Aggregate data POTS DETAILS: GAIN rate: up to 1Gbps downstream, STORAGE ENVIRONMENT 450Mbps upstream +2 dB for A to D Temperature: -40°C to +85°C ADSL2+: Up to 24Mbps downstream, 3 –2 dB for D to A (–40°F to +165°F) Mbps upstream IDLE CHANNEL NOISE Humidity: 5 to 95% (non-condensing) ADSL2+ Bonding (2 pairs): up to 45 Mbps downstream, 5 Mbps upstream GR-303, 12,5,8,10 < 18 dBrncCO POWER OPTIONS Full rate ADSL: up to 8 Mbps Local Universal AC FREQUENCY RESPONSE downstream, 896 Kbps upstream –48v DC 404 to 2804 Hz: +/– 0.5dB +/– 190v DC Line/Remote Power DATA RATE OPTIONS SIGNALING MODES 3 channels, 6 copper pairs All data rates selectable in 64kbps Loop-Start increments ------

Page 2

------ORDERING INFORMATION Calix E3-48C r2 Sealed Access Node

CALIX E3-48C r2 Sealed Access Nodes

100-04305...... E3-48C r2 VDSL2/ADSL2+ POTS Combo 48 Port Unit, Universal Power (AC/DC/Remote), 3*1 GE/2.5GE and 2 * 10GE ports 100-04306...... E3-48C r2 VDSL2/ADSL2+ POTS Combo 48 Port Unit, Universal Power (AC/DC/Remote), 3*1 GE/2.5GE and 2 * 10GE ports, 8 Port Bonded Copper Uplink

CALIX E3-48 and E3-48C Cable Entry Plugs

100-03224 ...... Gland Fitting Plug Kit, hex hole nylon plugs

CALIX E3-48 and E3-48C Alarm Cable

100-03226 ...... Alarm cable, DB-9, 20ft. – Above Grade (Gland Fittings)

CALIX E3-48 and E3-48C Fiber Patch Cables

100-03385...... Fiber patch; 6 LC/UPC to LC/UPC, 100ft, OSP rated 100-03216...... Fiber patch; 6 x LC/UPC to unterminated, 30 ft., OSP rated 100-03217...... Fiber patch; 12 x LC/UPC to unterminated, 30 ft., OSP rated

CALIX E3-48 and E3-48C Accessories

100-04613 ...... E3-48 r2 Vector Control Interconnect Cable 100-03371 ...... Access Panel Hex-Pin Head Security Key, set of 5 100-00035 ...... Five-Pin Protection Module (Gas/Solid State), Quantity 25 (for specs, see the Bourns datasheet) 100-03201 ...... SFP+ DA Cable, 2M—Above Grade (Gland Fittings)

CALIX E3-48 and E3-48C Mounting Kits

100-03749 ...... E3-48 Pole Mounting Bracket 100-03223 ...... E3-48 Wall Mounting Bracket 100-03222 ...... E3-48 Emerson CoolPed Mounting Bracket Kit

------1035 N. McDowell Blvd., Petaluma CA 94954 250-00357, Rev.10 TEL: 877.766.3500 WWW.CALIX.COM

Page 3 © Calix. All Rights Reserved.