Equipment List

Total Page:16

File Type:pdf, Size:1020Kb

Equipment List 2nd Floor Room Item Name Description Owner Contact 202 Autoclave Core Whitney Ice Machine Core Whitney 213 Microinjector Nagy Nagy Misc Scopes Nagy Nagy Verticle Pipette Puller Nagy Nagy ? Nanodrop Core Nagy 3rd Floor Room Item Name Description Owner Contact 302 Autoclave Core Shanks Ice Machine Core Whitney 312 Incubator Shaker Core Whitney Licor Core - CBC Whitney 4th Floor Room Item Name Description Owner Contact Notes 402 Ice Machine Whitney Autoclave Whitney Air Shaker Horton Centrifuge Sorvall RC5B Horton 405 Sonicator Weinert Weinert Shaking Water Bath Weinert Weinert Microfuge Weinert Weinert Zeiss Scope Weinert Weinert 406 Plate Reader Core Telsa Azure imager Core Capaldi phosphoimager Core Horton fluorescence and anisotropy, no absorbance or plate reader Core Telsa chemiluminescence 412 Sorvall RC2B Desiccator w/ pump and ice trapDieckmannDieckmann Air Shaker Horton Horton Incubator Full Size Weinert Weinert Incubator Full Size Weinert Weinert Incubator Half Size Weinert Weinert Incubator Half Size Weinert Weinert Incubator Half Size Weinert Weinert Incubator Half Size Weinert Weinert 424 -20 Freezer Capaldi Capaldi Air Shaker Capaldi Capaldi Scintillation Counter Core Core Used for swipes Ultracentrifuge Beckman Core Core RC6 Capaldi Capaldi Gel Dryer DieckmannDieckmann Air Shaker DieckmannDieckmann 428 Film Room Whitney Whitney 430 Incubator Stand Up w/ Foil DieckmannDieckmannBroken Centrifuge Sorvall RC2B Core Core Photospectrometer DieckmannDieckmann Gel Dryer DieckmannDieckmannLikely leaks Centrifuge Beckman J6B DieckmannDieckmann Incubator Stand up DieckmannDieckmannNeeds repaired Incubator Stand up DieckmannDieckmannNeeds repaired 5th Floor Room Item Name Description Owner Contact Notes 502 Autoclave Core Whitney Ice Machine Core Whitney 504 Zeis AxioPlan Core Buchan 506 GFP Dissecting scope Core Buchan Nikon confocal microscope Core Buchan 508 Sorval RC2-B centrifuge Core Buchan Sorval RC-5 centrifuge Core Buchan Beckman L8-80M ultracentrifuge Core Buchan labline air shaker Core Buchan 37 and 30 degree incubator Core Buchan 509 qPCR Core Buchan New MCB core machine RT-PCR Buchan Buchan 515 Nanodrop Yao Yao DNA Gel Imager Yao Yao Cell Disrupter Yao Yao 517 DeltaVision Elite Microscope Core Buchan 524 Shaker Incubator Core Yao Broken but fixable 530 Vacuum Condensor Core Yao Spectramax 250 Core Yao.
Recommended publications
  • Microlab® STAR™
    Microlab ® STAR™ Microlab ® STAR ™ AUTOMATED WORKFLOW SOLUTIONS CENTERED AROUND YOUR ASSAY The STAR combines Hamilton's patented pipetting technology including precise lock-and-key tip attachment, unrivaled liquid level detection, and comprehensive volume ranges to create flexible liquid handling workstations. Available in three base platform sizes, the STAR portfolio incorporates countless options to automate your workflows. Hamilton Robotics has also partnered with top leaders in the biotechnology industry to provide Standard Solutions based on commonly automated applications. Offering ready-to-start protocols for a variety of applications such as NGS, ELISA, and forensic assays, our Standard Solutions provide a faster way to automate your processes. 2 1 PATENTED TECHNOLOGY The STAR utilizes Hamilton’s proprietary Compressed O-Ring Expansion (CO-RE®) technology. CO-RE minimizes the production of aerosols and allows disposable tips or washable, steel needles to be used on channels in the same run. 2 MULTI-FUNCTIONAL ARM Our technology offers high pipetting accuracy and precision, from sub-microliter to large volumes, using Independent Channels and/or the Multi-Probe Head (MPH). Labware transportation is possible with the iSWAP® or CO-RE Grippers. The STAR can incorporate a camera, tube transportation, and other channel tools on a single arm. Comprehensive pipetting range: ■■■0.5 μL to 1 mL using the 1 mL Independent Channel ■■■50 μL to 5 mL using the 5 mL Independent Channel ■■■1 μL to 1 mL using the CO-RE 96 MPH ■■■0.1 μL to 50 μL using the CO-RE 384 MPH 3 FLEXIBLE SETUP The high-capacity deck is customized specific to your workflow, accommodating a wide range of labware and automated devices that can easily be exchanged to support multiple assays on one platform.
    [Show full text]
  • Orbital Shaker Benchmarks: Best Practices for Use and Maintenance
    APPLICATION NOTE Orbital shaker benchmarks: best practices for use and maintenance Authors: Mary Kay Bates, Senior Global Cell Culture Specialist and Sara Livingston, Global Product Manager, Thermo Fisher Scientific Key words: Orbital shaker, HEPA filter, cleaning, orbit diameter INTRODUCTION Most life science labs have an orbital shaker—often more than one— because these versatile workhorses are used in many applications including chemistry, biochemistry, molecular biology, microbiology, environmental and food sciences, clinical diagnostics, and eukaryotic Figure 1. Orbital shakers are available in a wide variety of sizes and formats. cell culture. Usage extends from basic research all the way up to maintenance schedule. In all cases, for before discarding any packing bioproduction. Shakers come in the manufacturer’s recommendations materials; some small parts can be a wide range of sizes and formats for each model take precedence and accidentally discarded. (Figure 1), including open air, heated, should be followed. or refrigerated. Choosing among Recognize that orbital shakers, these many options can be confusing, INSTALLATION regardless of size, can be heavier than and your application may require a Upon delivery of your new shaker, you may think. Take care when lifting specific shaker style1. inspect the shipping carton and the shaker, ensure you have at least ask the carrier to specify and sign one other person to help you, and that Regardless of the models used, this for any damage on your delivery the shelf or bench designated to hold application note contains valuable receipt, to ensure that any damage the shaker will be strong enough. information which applies to all to the components can be properly orbital shakers.
    [Show full text]
  • Thermo Scientific Solutions Automated Liquid Handling, Detection Model Cat
    THERMO SCIENTIFIC AUTOMATED LIQUID HANDLING, DETECTION AND SAMPLE PURIFICATION SOLUTIONS Versette™ RapidStak™ Also available: 96-and 384-channel Automated Microplate • A complete range of 96- and 384-well solid and strip microplates. Automated Liquid Handler Stacker • A complete line of sample storage tubes and equipment. • Total volume range 0.5-300 µl • Works seamlessly with • A complete range of Thermo Scientific manual and electronic • 96- and 384-channel interchangeable the entire Multidrop line of single and multichannel pipettes and tips. pipetting heads dispensers • Laboratory automation solutions for microplate instrument systems. • Compatible with D.A.R.T.sTM tips with • Schedule and automate any unique sealing properties two instruments with the • 6-position stage with compact dual level Thermo ScientificTM PolaraTM RS deck structure software For additional information contact your ™ • User-friendly programming options • Capacity from 30 to 150 plates Thermo Fisher Scientific sales representative or visit: with onboard touch screen or Thermo • Quick and easy setup www.thermoscientific.com/kingfisherinfo ScientificTM ControlMateTM PC software Model Cat. No. www.thermoscientific.com/versette RapidStak F01350 www.thermoscientific.com/multidrop RapidStak 2x F01351 Model Cat. No. www.thermoscientific.com/platereaders 30-Plate Stak Versette F01436 www.thermoscientific.com/wellwash Reference Guide Versette base unit 650-01-BS 50-Plate Stak F01437 www.thermoscientifc.com/ELISAsolutions 96- and 384-channel pipetting module for use with 650-02-NTC Polara RS Inquire 96- and 384-channel pipetting head 6-position stage 650-03-SPS Versette Pipetting Heads Orbitor RS™ 96-channel air displacement pipetting head. 650-06-9630 Volume 0.5-30 µl Automated Microplate Mover • Dedicated plate mover providing 96-channel air displacement pipetting head.
    [Show full text]
  • 2021 Product Guide
    2021 PRODUCT GUIDE | LIQUID HANDLING | PURIFICATION | EXTRACTION | SERVICES TABLE OF CONTENTS 2 | ABOUT GILSON 56 | FRACTION COLLECTORS 4 | COVID-19 Solutions 56 | Fraction Collector FC 203B 6 | Service Experts Ready to Help 57 | Fraction Collector FC 204 7 | Services & Support 8 | OEM Capabilities 58 | AUTOMATED LIQUID HANDLERS 58 | Liquid Handler Overview/selection Guide 10 | LIQUID HANDLING 59 | GX-271 Liquid Handler 11 | Pipette Selection Guide 12 | Pipette Families 60 | PUMPS 14 | TRACKMAN® Connected 60 | Pumps Overview/Selection Guide 16 | PIPETMAN® M Connected 61 | VERITY® 3011 18 | PIPETMAN® M 62 | Sample Loading System/Selection Guide 20 | PIPETMAN® L 63 | VERITY® 4120 22 | PIPETMAN® G 64 | DETECTORS 24 | PIPETMAN® Classic 26 | PIPETMAN® Fixed Models 66 | PURIFICATION 28 | Pipette Accessories 67 | VERITY® CPC Lab 30 | PIPETMAN® DIAMOND Tips 68 | VERITY® CPC Process 34 | PIPETMAN® EXPERT Tips 70 | LC Purification Systems 36 | MICROMAN® E 71 | Gilson Glider Software 38 | DISTRIMAN® 72 | VERITY® Oligonucleotide Purification System 39 | REPET-TIPS 74 | Accessories Overview/Selection Guide 40 | MACROMAN® 75 | Racks 41 | Serological Pipettes 43 | PLATEMASTER® 76 | GEL PERMEATION 44 | PIPETMAX® CHROMATOGRAPHY (GPC) 76 | GPC Overview/Selection Guide 46 | BENCHTOP INSTRUMENTS 77 | VERITY® GPC Cleanup System 46 | Safe Aspiration Station & Kit 47 | DISPENSMAN® 78 | EXTRACTION 48 | TRACKMAN® 78 | Automated Extraction Overview/ 49 | Digital Dry Bath Series Selection Guide 49 | Roto-Mini Plus 80 | ASPEC® 274 System 50 | Mini Vortex Mixer 81 | ASPEC® PPM 50 | Vortex Mixer 82 | ASPEC® SPE Cartridges 51 | Digital Mini Incubator 84 | Gilson SupaTop™ Syringe Filters 86 | EXTRACTMAN® 52 | CENTRIFUGES 52 | CENTRY™ 103 Minicentrifuge 88 | SOFTWARE 53 | CENTRY™ 117 Microcentrifuge 88 | Software Selection Guide 53 | CENTRY™ 101 Plate Centrifuge 54 | PERISTALTIC PUMP 54 | MINIPULS® 3 Pump & MINIPULS Tubing SHOP ONLINE WWW.GILSON.COM 1 ABOUT US Gilson is a family-owned global manufacturer of sample management and purification solutions for the life sciences industry.
    [Show full text]
  • Shakers/Mixers for EPA Methods
    Shakers/Mixers for EPA Methods MID-RANGE 3D SHAKER The Mid-Range 3D Shaker gives you the same convenient, consistent 3D shaking on your bench top as you get with our 3D Floor Shaker. • Mechanically shakes glassware for consistent, repeatable results. • Fits in fume hood to protect personnel from fumes. (Minimum 30"d x 36"l x 36"h for 2-liter sep funnels; 24"d x 72"l x 36"h for sizes up to 1-liter). • Handles total loads up to 40 lbs without needing to balance load. • "Lazy Susan" design allows 360° rotating of platform for easy loading and unloading. • Platform locks in place for added safety. • Accommodates up to four 2-liter separatory funnels. • Glas-Col's automatic venting separatory funnels available for added safety. Specifications Motor Speed: 10-170 cycles/min. Load Weight Capacity: Maximum of 40 lbs. (18.1 kg). Electrical: Power switch, circuit breaker, and 6-ft., 3-wire cord. Digital speed and countdown interval timers. Electrical Rating: 120 or 240Volts available Size: Shaker base dimensions-22"d x 17"w (55.9 x 43.2 cm). Height to platform 14" (35.6 cm). Octagonal platform-19" (48.3 cm) across corners. Weight: 165 lbs. Glas-Col Number Description 099A VS20012* Shaker base only, 120V 099A VS20024* Shaker base only, 240V 099A VS22012 Shaker base w/four 2-liter separatory funnel holders, 120V 099A VS22024 Shaker base w/four 2-liter separatory funnel holders, 240V * Note: Glassware holders not included. Order separately. FUNNEL OR FLASK HOLDER (Midrange Shaker) Each separatory funnel holder will hold one funnel, and you can use up to four holders at once.
    [Show full text]
  • Pipetting and Sterile Culture Lab Expt 1
    TECHNIQUES IN MOLECULAR BIOLOGY – BASIC TECHNIQUES: PIPETING AND STERILE CULTURE Mastery of micropipetting and sterile technique is essential for reliable success in molecular biology. Take these exercises and our discussions about pipetting seriously. Micropipettors A micropipettor* is essentially a precision pump fitted with a disposable tip. The volume of air space in the barrel is adjusted by screwing the plunger in or out of the piston, and the volume is displayed on a digital readout. Depressing the plunger displaces the specified volume of air from the piston; releasing the plunger creates a vacuum which draws an equal volume of fluid into the tip. The fluid in the tip is expelled by depressing the plunger again, but to a further, second 'blow-out' stop. * The nickname is originally derived from a different pipettor brand ('Pipetman'), but still widely used by molecular molecular biologists for all micropipettors. Take the following precautions when using the pipettor: • Never rotate the volume adjustor beyond the upper or lower range indicated on the pipettor. • Never invert or lay down a pipettor with a filled tip (fluid can run into the barrel). • Never let the plunger snap back after withdrawing or expelling fluid (could damage the piston or cause fluid to enter the barrel, and contact the piston – aka ‘fountaining’). • Never reuse a tip that has been used to measure a different reagent, or that has entered a tube containing a different reagent. When in doubt, use a fresh tip. Pipet-Lite (LTS) Pipettors: Pipet-Lite (LTS) is a brand of micro-pipettor used in the laboratory.
    [Show full text]
  • Forma 420 Tabletop Shaker User Manual
    Model 420 Series Forma Orbital Shaker * Operating and Maintenance Manual 7000420 Rev. 7 Preface * Triple counter-balanced, single eccentric drive mechanism (U.S. Patent #5,558,437) * Test tube rack (U.S. Patent #5,632,388) MANUAL NUMBER 7000420 -- -- 11/15/06 Clarified that platforms are ordered separately (pack list) ccs 7 22245/OS284 3/26/04 Updated timer specifications to 5 minute increments ccs -- OS-279 2/19/04 Added unit specific electrical schematic, no Model 4500 Series ccs -- -- 6/25/03 Inserted platform installation section, removed erroneously ccs 6 20194 7/3/01 Changed ferrite installation and updated EMC standard aks 5 19305/OS-217 10/21/00 Added platform stalled and check fuse alarm messages ccs 4 -- 10/2/00 Quark format ccs 3 18544/OS-202 10/19/99 Added power fail time delay, chg’d check belt alarm message clear ccs 2 18404 7/9/99 Removed drive mechanism shipping bracket, Section 2.8 ccs -- 17928/SI-7405 6/8/99 Added universal test tube holder 600088 ccp 1 SI-7348 2/10/99 Updated parts list and schematics (board chgs) per R. Bruker deg REV ECR/ECN DATE DESCRIPTION By Thermo Fisher Scientific Orbital Shaker i Preface Important Read this instruction manual. Failure to read, understand and follow the instructions in this manual may result in damage to the unit, injury to operating personnel, and poor equipment performance. ▲ Caution All internal adjustments and maintenance must be performed by qualified service personnel. ▲ Warning Model 420 Obital Shaker may be used to process non-flammable materials only! ▲ Warning Grounding circuit continuity is vital for the safe operation of this shaker.
    [Show full text]
  • Laboratory Shakers Resource Guide 2018 Laboratory Shakers Resource Guide
    LABORATORY SHAKERS RESOURCE GUIDE 2018 LABORATORY SHAKERS RESOURCE GUIDE INTRODUCTION SOME SHAKER PLATFORMS by John Buie CONTROL TEMPERATURE AND RPMS OVER A WIDE RANGE THE MANY WAYS TO SHAKE by Mike May, PhD SAMPLES by Mike May, PhD INSIGHTS ON LAB SHAKERS FOR... • Separation QUESTIONS TO ASK WHEN • Biological Samples BUYING A LAB SHAKER by Mike May, PhD and Angelo DePalma, PhD by Ryan Ackerman and Mike May, PhD Lab Manager 2018 1 LabManager.com Introduction by John Buie Mixing solutions is one of the most common laboratory tasks. Over the years, a number of automated methods for mixing have been devised, all of which remove this burden from the operator by offering a sustained and controlled stirring or shaking action for indefinite periods of time. Laboratory shakers consist of an oscillating board on which solutions can be placed in flasks or beakers and are popular for the simultaneous agitation of multiple solutions, such as mixing the contents of microplates. Samples in a lab shaker can be agitated via a linear motion, by an orbital motion to create a vortex in the solution, or a number of other motions. Unlike laboratory instruments that develop incrementally over time without any real innovation, the technology in lab shakers continues to advance at a faster rate. The future for lab shakers is likely to involve the development of instruments that offer alternative mixing actions for more thorough and efficient mixing, possibly mimicking further the action of the human wrist. Other innovations are likely to include instruments capable of mixing more samples simultaneously, and greater integration with other lab processes, allowing for more automation in the laboratory and less human intervention.
    [Show full text]
  • Eye Wash Bottle Inspection Checklist
    Eye Wash Bottle Inspection Checklist Played-out Werner summon very adorably while Ignacius remains walk-in and parapodial. Reggie indisposing his monasteries jury-rigs chillingly or providently after Johnathan perjure and plagiarise frolicsomely, unnurtured and despoiled. Unsympathetic Parker moults ostensively and phenomenally, she vitrified her repagination dinks niggardly. What type of time we all new emergency eye wash stations target node, simply reverse the Stream of chemicals are no drain is based on eyewash station from eye wash bottle inspection checklist is used in a general safety supplies are easy way such as a new area? Also provide immediate flushing fluid must! Chemical splash goggles offer as best protection against foreman and liquid splashes as graphically illustrated on the poster shown on chase right. Emergency Lighting, emergency showers with heated plumbing are available. The face wash products as a stream of existing eyewash? Handheld drench hoses provide support for emergency shower and eyewash units but they are not intended to replace them. Eyewash Log Eye Wash Station Inspection Checklist uxcell M Thread 304 Stainless Steel inner Ring Shaped Lifting Eye Nut 5pcs Original Shaker Bottle. Fendall Sperian Saline Eye Wash Bottle Refill 32 oz. What guise the expiry date let the preferred flushing solution? View command station checklist maintained. Do not attempt to flush units that will drain onto a wall or directly on the floor; maintenance will check those units quarterly. Many workplaces where many jurisdictions because of eye wash bottle inspection checklist below thfrost line of chemicals are known for bottle might not have a facepiece leak check that.
    [Show full text]
  • Microplate Shaker
    Shakers Contents Dual-action Shakers (orbital & reciprocating) 10 to 300 rpm SK-300/600 SK-71 Orbital Shakers 50 to 300 rpm CMS-350 30 to 500 rpm SKC-6075/6100/6200 SKC-7075/7100/7200 10 to 500 rpm SKF-2025/2050/2075 (depend on each model) SKF-3050/3075/3100 150 to 1200 rpm CPS-350 Reciprocating Shakers 10 to 450 rpm SKF-2025R/2050R/2075R (depend on each model) SKF-3050R/3075R/3100R Rocking Shaker 5 to 100 rpm CRS-350 Waving Shaker 8 to 100 rpm CWS-350 Separatory Funnel Shaker (vertical reciprocating) 50 to 100 rpm RS-1 1/12 Technical Benefit Optimum Control Features Precision Microprocessor PID control Safety Automatic power cut-off in case of overcurrent Automatic adjusted shaking speed when load imbalance or unusual vibration is detected by the sensor(only SKC models) Bright Display Vivid and colorful VFD or Bright LED display with touch-sensitive keypad for each models Operating Function wGvmm wGvmm Special acceleration and deceleration (except for RS, CPS, CMS, CWS and CRS models) GGVGG Shaking System - Stopping the shaking table always at the center using a position sensor - Smooth start and smooth stop preventing chemical spills from flasks or test tubes Multi-step programming of shaking operations (Wait ON/OFF timer & Program mode, Forward & Backward & Pause) Digital Display only for SKC models 2/12 Technical Benefit Constructional Features Cold room or Incubator use Ideal for cold room or incubator use Permissible environmental conditions: temperature (up to max. 60°C) and relative humidity (up to 80%) Innovative Shaking DD motor
    [Show full text]
  • Shakers Brochure
    Shakers German technology made in the USA 1 3D Shakers | World in motion! For over a century, IKA® has been leading the way with innovative technologies and applications in the field of laboratory, analytical and process equipment. In 1925, IKA® first produced the conventional shaker and displayed this entire product line at ACHEMA. To give our loyal customers a leading edge, IKA® has ensured that new product innovation has been introduced time and time again. And once again, IKA® has completely revamped its‘ shaker line by incorporating advanced technology with unique designs. As always, we continue our 100 year old tradition of bringing design, innovation, ease of use and commitment to our customers! IKA® already has a line of well known and proven orbital and horizontal shakers. IKA® is proud to introduce a brand new series of Rollers, Rockers and Overhead Rotators. The wide range of Rocking, Rolling, Rotating and Shaking covers the entire spectrum of motions in mixing technology. All new devices are available in a basic and digital version. IKA® has also added a sibling to its’ voluminous incubator shaker KS 4000 i control and ic control. The expanded product range facilitates the use of our equipment in a wider range of applications, especially in the medical and biological field. The hallmark of IKA®, exceptional design, innovation, quality, high efficiency, smooth operation and excellent performance continues as it has for 100 years! Year 3 warranty* * 2+1 years after registering at www.ika.com/register, glassware and wearing parts excluded Protection class according to DIN EN 60529: IP 21 2 3 2D & 3D Rockers | Enhanced dimensions, Smaller footprints! 2D & 3D Rockers accessories TB 1 Tray 28 x for tubes 5 ml, Ø 12 mm Touch keypad for easy operation 2 Ident.
    [Show full text]
  • Pipette and Sieve Grain Size Analysis: Procedures Guide
    Pipette and Sieve Grain Size Analysis: Procedures Guide Douglas W. Haywick Department of Earth Sciences University of South Alabama Mobile, AL 36688 Third Edition (2004) Pipette and Sieve Grain Size Analysis: Detailed Instructions (2004) for a 20 Sample Run [Procedure based upon Coventry and Fett (1979)] Many days before analysis (preferably right after sediment collection) 1) Place your sediment samples in foam or aluminum bowls to dry. In order to avoid mixing specimens, label each bowl with the sample number you used when collecting them in the field. Place enough sediment in the bowls to produce 20 to 30 grams of dried material. Remove any obvious plant/wood fragments before starting to dry your samples, but try to avoid removing sediment with the detritus. If your sediment is very organic rich (e.g., > 15% organic), consider oxidizing the sediment samples before doing grain size. (See item 2 below). [20 minute prep time required for this stage] All sediment samples must be dry before you do your analyses. It would be best if you started drying them right after you get back from the field. A low temperature drying oven (i.e., < 50 ºC) may also be used to speed up the drying process, but use it expeditiously. Baked clay is almost impossible to disaggregate. 2) If your sediment contains a lot of fine organic material (stuff that can’t be easily removed), you might want to soak it in 30% hydrogen peroxide solution before doing grain size analysis. This will oxidize the organics. As a general rule, oxidization should only be done if the sediment is dominantly silt and clay and black in colour.
    [Show full text]