DOCSLIB.ORG

PSI 8.8L NA ON-R LPG Spec

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
PSI 8.8L NA ON-R LPG Spec ON-ROAD 8.8LNA PROPANE 270 hp @2600 rpm / 565 lb-ft @1600 rpm PSI’s medium-duty 8.8L Naturally Aspirated engine is a U.S. EPA-certified propane power unit developed from the block up to be reliable and durable. The 8.8-Liter engine provides industrial, bus, truck and marine OEMs a fully integrated drop-in solution with uncompromised power and performance, maximum fuel efficiency, emissions certification and fuel flexibility. Superior engine performance is driven by an ECU that integrates and coordinates all critical functions including: governor, variable ignition timing, air fuel ratio control, PSI 8.8-LITER NA LPG ENGINE DATA knock suppression and engine protection. All PSI engines feature the same fuel systems and controls, simplifying Cylinders V-8 application development and support. Induction system Naturally aspirated Combustion system Spark-ignited GENERAL DATA Displacement 535 cid (8.767 L) 1) Heavy-duty, easy-to-integrate design Compression ratio 10.1:1 • Forged, induction-hardened crankshaft Bore & Stroke 4.35 in x 4.50 in (110.5 mm x 114.3 mm) • Forged rods and pistons Rated Power 270 hp (201 kw) • Oil bath lubrication provides piston cooling Rated Torque 565 lb-ft (766 nm) • Common controls, harness, exhaust, cooling & mounts • Chassis integration Cooling system Water-cooled 2) “Diesel-like” performance with “gasoline-like” operation Engine Coolant Capacity 16 qts • Low-speed design offers unique torque & power curves Engine Oil Capacity 7.0 qts (6.62 L) • Suitable replacement for diesel-powered applications Engine Oil Capacity (with filter) 7.5 qts (7.10 L) • Smooth, quiet, reliable power Direction of rotation Clockwise from front • 25% less weight results in improved fuel economy Fuel Type Propane 3) Custom configurations Emissions Certification US EPA & CARB HD-SI • Customizable OBD-HD certified controller Dry Weight 748 lb (339 kg) • Flexible J1939 communications • Various accessory drive configurations • SAE2 and SAE3 transmission mounts • Optional block heater, oil pan heater and oil cooler PACKAGING DIMENSIONS (A) 32.3 in / 82.0 cm (B) 27.3 in / 69.3 cm (A) Length (B) Width (C) Height Base Engine 32.3 (82.0) 27.3 (69.3) 30.0 (76.2) In (cm) w/ FEAD 36.2 (91.9) 27.3 (69.3) 30.0 (76.2) In (cm) (C) w/Flywheel Housing 36.2 (91.9) 33.3 (84.6) 32.5 (82.6) In (cm) 30.0 in 76.2 cm PSIENGINES.COM ON-ROAD 8.8LNA PROPANE 270 hp @2600 rpm / 565 lb-ft @1600 rpm ENGINE HIGHLIGHTS PSI’s 8.8-Liter engine offers modern features in a durable package that easily integrates into existing OEM applications. The system combines fuel flexibility, uncompromised power and maximum efficiency. Crankshaft Intake Manifold Tuned long-runner provides higher Cylinder Heads Forged and induction-hardened torque and special air gap design keeps Modernized, heavy-duty, high-flow steel crankshaft creates durable block engine air cooler for improved efficiency heads create fast burn to improve capable of 1,000+ ft-lb of torque efficiency and reduce emissions 600 500 TORQUE & POWER CURVES 565 lb-ft (766 nm) Liquid Propane-Injected 500 @ 1,600 rpm 400 HORSEPOWER (hp) 400 300 300 270 hp (201 kw) 200 @ 2,600 rpm TORQUE (ft-lbs) 200 100 Torque Power 100 0 800 1,200 1,600 2,000 2,400 2,800 3,200 ENGINE SPEED (rpm) Power Solutions International201 Mittel Drive, Wood Dale, IL 60191 POWERING A GREENER FUTURE T: 630-350-9400 • F: 630-350-9900 • psiengines.com.
Load more

Recommended publications
  • 127 Emissions
    EMISSIONS 127 Heater Hose Fitting, Carburetor A.I.R. Pipe and EGR Tube Stud Kits and Pipe Plugs 1980-96 F100 F150 F250 Bronco These often overlooked items are always a good idea to have on hand when working on intake, carburetors, engine plumbing, or vacuum 1 accessories. High quality Aluminum Heater Hose Fittings are available in clear or black anodized finish with straight or 90 degree bends. The threaded NPT (National Pipe Thread) fitting 3 ensures a leak free seal and the single barbed outlet allows proper hose connection. PART DESCRIPTION APPLICATION PRICE 55-3750-F STRAIGHT FITTING-CLEAR 1/2"NPT 5/8" BARB $10.95 55-3751-F STRAIGHT FITTING-BLACK 1/2"NPT 5/8" BARB $10.95 55-3754-F 90 DEGREE FITTING-CLEAR 1/2"NPT 5/8" BARB $20.95 2 55-3755-F 90 DEGREE FITTING-BLACK 1/2"NPT 5/8" BARB $20.95 5 6 Carburetor Stud Kits feature 5/16" black bullet nosed 4 studs complete with nuts and washers in 1-1/2" to 2" lengths for added depth when using carburetor spacers or adapters. High strength Grade 8 steel W/EFI = With Electronic Fuel Injection studs allow the use of an engine lift plate for engine W/O CA = Without California Emissions removal and installation. PART ILL# DESCRIPTION APPLICATION REQD PRICE PART DESCRIPTION APPLICATION PRICE 42-6030 (1) A.I.R.MANIFOLD TUBE 4.9L 80-86 (1) $94.95 55-3760-F CARBURETOR STUD KIT 5/16" X 1-1/2" $10.95 42-6031 A.I.R.MANIFOLD TUBE 4.9L 87-96 (1) $59.95 55-3761-F CARBURETOR STUD KIT 5/16" X 2" $10.95 42-6051 (2) A.I.R.CROSSOVER PIPE-RR (1) $62.95 W/EFI 5.0L 85-96 Steel Pipe Plug Fitting Sets are available in clear zinc or black finish featuring recessed Allen head fittings 42-6036 A.I.R.CROSSOVER PIPE 5.8L 80-11/84 (1) $84.95 in 8 convenient sizes.
    [Show full text]
  • Webasto Product – North America Idle Reduction Technology
    Webasto Product – North America Idle Reduction Technology Webasto History - 108 Years of Excellence 1901 Wilhelm Baier, Sr. founded the company in Esslingen, Germany WilhElm BAier in STOckdorf WEBASTO Webasto World Wide Locations Aserbeitschan Australia Austria Belgium Belarus Bulgaria China Czech Republic Denmark Estonia France Finland Region Convertible Global Comfort Georgia Roof & Body Solution Germany Great Britain CRB GCS Greece Hungary Iceland Europe India Italy Japan America Korea Latvia Lithuania Asia Netherlands Norway Poland Russia Sweden Switzerland Slovakia Slovenia Spain South Africa Turkey Ukraine USA Webasto Worldwide Global . Sales $2.1 Billion . 6,300 Colleagues North America . Sales $540 Million . 1,650 Colleagues . Locations: Fenton, Rochester Hills and Livonia - Michigan Santa Fe Springs - California Lexington - Kentucky Webasto – North America Is idle reduction the right business decision for you? © Webasto, 2007 Enhancing Your Bottom Line with Idle Reduction Ready to go means delivery schedules are realized and business is running at the highest levels of efficiency. Webasto has a solution for……. Defense Vehicles Sleepers Day Cabs Vocational Fire & Rescue School Bus Core Principles of a Webasto Solution Mission Readiness Return on Investment Safety Core Principles of a Webasto Solution Mission Readiness Mission Readiness Provide heat where you need it, when you need it! Webasto has a heating solutions that will ensure a vehicle is ready to go. • A Webasto heater can: • Pre-warm the vehicle’s engine • Keep
    [Show full text]
  • 400REZCK Standard Features Ratings Range
    Model: 400REZCK 480--600 V Gas EPA-Certified for Stationary Standard Features and Non-Emergency D Kohler Co. provides one-source responsibility for the Applications generating system and accessories. D The generator set and its components are prototype-tested, Ratings Range factory-built, and production-tested. 60 Hz D A one-year or 8000 hr limited warranty covers all generator Continuous: kW 435 set systems and components. A two-year or 16,000 hr extended limited warranty is also available. D The pilot-excited, permanent magnet (PM) alternator provides superior short-circuit capability. D Baseload with the utility applications only. D Transient load steps without the utility is not authorized. Generator Set Rating Lean-Burn Natural Gas 80_CRise Continuous Rating Alternator Voltage Ph Hz kW Amps 5M4028 277/480 3 60 435 524 5M4270 347/600 3 60 430 414 RATINGS: All three-phase units are rated at 1.0 power factor without pumps or fans. Ratings are in accordance with ISO-8528-1 and ISO-3046-1. Obtain technical information bulletin (TIB-101) for ratings guidelines, complete ratings definitions, and site condition derates. The generator set manufacturer reserves the right to change the design or specifications without notice and without any obligation or liability whatsoever. G4-264 (400REZCK) 6/16 Alternator Specifications Specifications Alternator D NEMA MG1, IEEE, and ANSI standards compliance for temperature rise and motor starting. Type 4-Pole, Rotating-Field Exciter type Brushless, Permanent- D Sustained short-circuit current of up to 300% of the rated Magnet Pilot Exciter current for up to 10 seconds. Voltage regulator Solid State, Volts/Hz D Sustained short-circuit current enabling downstream circuit Insulation: NEMA MG1 breakers to trip without collapsing the alternator field.
    [Show full text]
  • Installation Guide
    TT-1587 6/12a INSTALLATION INSTRUCTIONS Original Issue Date: 1/12 Model: 38RCL & 48RCL Market: Residential/Light Commercial Subject: Block Heater Kits Introduction Disabling the generator set. Accidental starting can cause severe injury or death. Before working on the The engine block heater kit heats engine coolant, generator set or equipment connected to the set, disable the making starting easier and warmup quicker. The generator set as follows: (1) Press the generator set off/reset button to shut down the generator set. (2) Disconnect the thermostat, built into the base of the block heater, power to the battery charger, if equipped. (3) Remove the automatically turns off the heater when coolant battery cables, negative (--) lead first. Reconnect the negative temperature reaches 27--38_C (80--100_F). (--) lead last when reconnecting the battery. Follow these precautions to prevent the starting of the generator set by the The generator set engine is equipped with valves that remote start/stop switch. eliminate the need to drain the cooling system before installing the block heater. WARNING Models Volts Amps Watts Kit No. 120 8.3 1000 GM84997-KP1-QS 38RCL 240 4.2 1000 GM84997-KP2 120 12.5 1500 GM78529-KP1-QS Hot coolant and steam. 48RCL Can cause severe injury or death. 240 6.3 1500 GM78529-KP2 Before removing the pressure cap, Figure 1 Kit Selection stop the generator set and allow it to cool. Then loosen the pressure cap Read the entire installation procedure before beginning to relieve pressure. the installation. Perform the steps in the order shown. Engine block heater.
    [Show full text]
  • 2018 Application Guide
    DC18 566 Weatherly Index A PRE-HEATED ENGINE.. MANUFACTURERS OF QUALITY SAVES FUEL COSTS ENGINE HEATERS SINCE 1947 STARTS QUICKER RUNS SMOOTHER WARMS CAB QUICKER AIDS DEFROSTING 2018 SAVE ENGINE WEAR APPLICATION GUIDE AND TEAR ENGINE BLOCK HEATER • LOWER RADIATOR HOSE HEATER DIESEL HEATER • EXTERNAL TANK HEATER MAGNETIC HEATER • FLEXIBLE HOT PAD • DIP STICK HEATER BATTERY PAD HEATER • BATTERY BLANKETS AUXILIARY INTERIOR HEATER • CORD SETS • DEFROST FANS Manufactured by FIVE STAR MANUFACTURING GROUP, INC. TEL: 1-888-872-7278 FAX: 1-800-793-4806 www.fivestarmanufacturing.com Kats 2018 cover.qxp_Kats 2010 cover.qxd 6/25/18 7:43 AM Page CII ELEMENT MUST FACE IN THIS DIRECTION TO AVOID RECOMMENDED LOWER CONTACT WITH ENGINE WALL RADIATOR HOSE HEATER HEATERS MANUFACTURED TO RECOMMENDED EXTERNAL REPLACE FROST PLUG IN THE HOW TO USE THIS TANK HEATER BLOCK OF AN ENGINE APPLICATION GUIDE FREEZE PLUG HEATER DIRECTION LOWER RAD EXTERNAL 12010 PERMANENT REMOVABLE LOCATION WATTS HEATER HEATER K9 WIRE LEADS ARE WATTAGE OF PERMANENTLY ATTACHED WIRING WITH SILICONE END RECOMMENDED HEATER TO HEATING ELEMENT IS PLUGGED INTO HEATER FROST PLUG HOLE THAT AFTER INSTALLATION IS EASIEST TO INSTALL LOCATION OF BLOCK HEATER INSTALLATION POINTS TRANSVERSE ENGINES CONVENTIONAL ENGINES CODE: FRONT FRONT FACE CODE: fi LS LEFT SIDE LS FL 2nd LF FC 2nd RF FR fi RS LS LFF RFF RS LF LEFT FRONT fi fi fi fi fi fi fi fi RS RIGHT SIDE fi fi LC LEFT CENTER FL FRONT LEFT fi LR LEFT REAR FC FRONT CENTER fi LF RF RF RIGHT FRONT FR FRONT RIGHT LFfi RFF fi RC RIGHT CENTER RL REAR LEFT RR RIGHT REAR RC REAR CENTER 2nd LFfi LFF LEFT FRONT FACE fi fi fi fi RR REAR RIGHT fi RFF RIGHT FRONT FACE RL 2nd LR RC 2nd RR RR fi LFF LEFT FRONT FACE LC RC LS LEFT SIDE RFF RIGHT FRONT FACE REAR fi RS RIGHT SIDE 2nd RF 2nd RIGHT FRONT DRIVER’S SEAT fi 2nd LF 2nd LEFT FRONT LR RR 2nd LR 2nd LEFT REAR fi 2nd RR 2nd RIGHT REAR fi REAR FACE DRIVER’S SEAT IF REQUIRED VIN CODE IS 8TH CHARACTER IN VEHICLE IDENTIFICATION NUMBER.
    [Show full text]
  • 1300REZCK Standard Features Ratings Range Generator Set Rating
    Model: 1300REZCK 480--4160 V Gas Standard Features D Kohler Co. provides one-source responsibility for the generating system and accessories. D The generator set and its components are prototype-tested, Ratings Range factory-built, and production-tested. 60 Hz D A one-year or 8000 hr limited warranty covers all generator Continuous: kW 1310 set systems and components. A two-year or 16,000 hr extended limited warranty is also available. D The pilot-excited, permanent magnet (PM) alternator provides superior short-circuit capability. D Baseload with the utility applications only. D Transient load steps without the utility is not authorized. D High efficiency Miller cycle for low fuel consumption. D Dual bearing alternator for exceptional life. Generator Set Rating Lean-Burn Natural Gas 80_CRise Continuous Rating Alternator Voltage Ph Hz kW Amps 7M4052 277/480 3 60 1310 1576 7M4290 347/600 3 60 1310 1261 7M4370 2400/4160 3 60 1300 181 RATINGS: All three-phase units are rated at 1.0 power factor without pumps or fans. Ratings are in accordance with ISO-8528-1 and ISO-3046-1. Obtain technical information bulletin (TIB-101) for ratings guidelines, complete ratings definitions, and site condition derates. The generator set manufacturer reserves the right to change the design or specifications without notice and without any obligation or liability whatsoever. G4-260 (1300REZCK) 6/16 Alternator Specifications Specifications Alternator D NEMA MG1, IEEE, and ANSI standards compliance for temperature rise and motor starting. Type 4-Pole, Rotating-Field Exciter type Brushless, Permanent- D Sustained short-circuit current of up to 300% of the rated Magnet Pilot Exciter current for up to 10 seconds.
    [Show full text]
  • AJV8 Engine Overview
    AJV8 Engine Overview Introduction The AJV8 4.0 liter engine is the first of a new family of Jaguar engines. Designed to give excellent performance, refinement, economy and to conform to the strictest emission legislation, the engine is available in both normally aspirated (N/A) and supercharged (SC) versions. Weighing only 441 lb. (500 lb. SC), the engine is shorter by 12 inches (300 mm) than the AJ16 4.0 liter engine. Cylinder heads with four valves per cylinder, cylinder block, bed plate and structural sump are all cast aluminum. Cylinders have electroplated bores which reduce piston friction, improve warm-up and oil retention. A variable valve timing system has been introduced for normally aspirated engines to give improved low and high-speed engine performance, excellent idle quality and improved exhaust emissions. The valve gear is chain driven for durability. Low valve overlap improves idle speed, improves combus- tion efficiency and reduces hydrocarbon emissions. The normally aspirated intake manifold is a one-piece composite molding with integral fuel rails con- necting to the eight side-feed fuel injectors. Combustion air flow into the engine is via an electronic throttle assembly. Throttle movement is controlled by the ECM using sensors in the throttle assembly and an electric throttle motor. Supercharged versions are similar with the belt driven supercharger located downstream of the electronic throttle assembly. The supercharger provides pressurized combustion air to the cylinders through two air to liquid charge air coolers (intercoolers). The engine has a low volume, high velocity cooling system, which achieves a very fast warm-up with reduced combustion chamber and increased cylinder bore temperatures.
    [Show full text]
  • HOTSTART IMC-800 Standard Product Catalog
    IMC-800 PRODUCT CATALOG ENGINE HEATERS OIL HEATERS CONTROLS ACCESSORIES TABLE OF CONTENTS HOTflow® ONLINE PAGES 4 - 6 ® TECHNICIAN • HOTflow Engine Heaters 1 CTM, CKM, CSM Models CERTIFICATION TRAINING PAGES 8 - 15 • Thermosiphon Engine Heaters • Page 7 Weathertight Design TPS, CB, CL, SB, SL, WL, OEM Replacement Models HEATER INSTALLATION PAGES 16 - 17 • Thermosiphon Engine Heaters • Page 18 (Thermosiphon) Hazardous Location • Page 47 (In-block) EE Models PAGES 20 - 25 • Lube Oil Heaters (AC and DC) HOW TO SPECIFY AN 2 • Industrial Immersion Heaters ENGINE HEATER Thread-in and Threadless Models • Page 50 PAGES 27 - 32 • Remote Thermostats for Lube Oil Heaters 3 • Temperature Controls for Thermosiphon Engine Heaters CONVERSION CHARTS • Complete Control Systems • Page 50 PAGES 34 - 36 • Battery Warming Pads & Accessories 4 • Blanket Style Battery Warmers - UL Recognized • Silicone Hot Pads CUSTOM PRODUCTS PAGES 38 - 49 • In-block Heaters Call for information on: 5 • Electrical Cords for In-block Heaters • Thermocords and TwinStatTM • Wiring Harnesses • Flush Mount Kits and Accessories • APUs • Forced Circulation Heating Systems • Other Specialty Products SECTION 1 HOTflow® and THERMOSIPHON ENGINE HEATERS Engine ® Power Supply HOTflow Displacement kW Amps Model Number Volts Ø Hz Engine Heaters CID/Liter CTM w/8’ (2.4 m) cord and NEMA plug* CTM Model 0 – 500 CID 120 1 60 1 8.8 CTM10110-N00 Single Phase 0-8 L 240 1 50/60 1 4.4 CTM10210-N00 500 – 750 CID 120 1 60 1.5 13.0 CTM15110-N00 1000–2500 Watts 8 - 12 L 240 1 50/60 1.5 6.5 CTM15210-N00 750 – 1200 CID 120 1 60 2.5 21.3 CTM25110-N00 12 – 20 L 240 1 50/60 2.5 10.7 CTM25210-N00 Meets requirements for CTM w/9.8’ (3 m) cord, without plug installation on any UL 2200 listed generator.
    [Show full text]
  • Page 1 Condensing Models On-Demand Water Heater Service
    Condensing Models On-Demand Water Heater Service Handbook MODELS: 160X3P 180X3P 199X3P (Indoor/Outdoor) (Indoor/Outdoor) (Indoor/Outdoor) Series 100 Series 100 Series 100 THIS SERVICE HANDBOOK IS FOR USE BY QUALIFIED SERVICE PROFESSIONALS ONLY. IF YOU NEED ASSISTANCE, CALL TECHNICAL SUPPORT. IN USA, CALL AT 8777372840. IN CANADA, CALL 8884798324. DIR 2000585401 Rev. B March 2020 TABLE OF CONTENTS SPECIFICATIONS ............................................................................................................................................................................................4 INTRODUCTION ............................................................................................................................................................................................5 General Installation Guidelines ...................................................................................................................................................................................................5 NORMAL OPERATION ...................................................................................................................................................................................6 Activation ..................................................................................................................................................................................................6 Operation ..................................................................................................................................................................................................6
    [Show full text]
  • X100 Eng T/G USA AQ
    Technical Guide AJ-V8 Engine and 5HP24 Transmission Introduction Published by Service Communications, Jaguar Cars Limited Publication Part No JJM 18 15 15/70, August 1996 AJ-V8/5HP24 Preface This Technical Guide introduces the new AJ V8 engine and 5HP24 transmission installed in the XK8 Sports car. It is intended to give Jaguar Dealer workshop personnel an overview of their construction and operation, and is for information purposes only. The contents of this Technical Guide must not be used as a reference source for servicing procedures; all servicing procedures must be in accordance with the appropriate Service Manual. This Technical Guide will not be updated. While every effort is made to ensure accuracy, changes may occur between going to press and the equipment being introduced to the market. Once the equipment is in service, details of changes can be obtained from Service Bulletins and revisions to the Service Manuals. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form, electronic, mechanical, photocopying, recording or other means without prior written permission from the Service Division of Jaguar Cars Limited. Contents AJ-V8/5HP24 Subject Page Glossary Abbreviations 2 Introduction 3 Engine Basic Engine 5 Engine Cooling 17 Engine Lubrication 20 Variable Valve Timing 24 Air Intake System 27 Fuel System 33 Ignition System 35 Crankcase Ventilation 35 EGR System 37 Engine Accessories 38 Accessory Drive 39 Engine Harness 41 Engine Covers 42 Engine Specifications
    [Show full text]
  • Chapter 5 Optional Fittings
    Chapter 5 Optional Fittings Inside this chapter you will find: HEATER OPTIONS STIRRER MOTORS AND DRIVES STIRRER OPTIONS GAS ENTRAINMENT CATALYST BASKETS CONDENSERS SAFETY RUPTURE DISCS PRESSURE RELIEF VALVES PRESSURE GAGES GAS MEASUREMENT SYSTEMS HIGH PRESSURE BURETTES LIQUID CHARGING SYSTEMS METERING PUMPS LIQUID PIPETTES SOLIDS CHARGING SYSTEMS COOLING COILS CYLINDER LINERS SAMPLE COLLECTION VESSEL BOTTOM DRAIN VALVES VALVES AND FITTINGS SAFETY CHECK VALVES THERMOCOUPLES PRESSURE HOSE EXPLOSION PROOF APPARATUS WINDOWS INSULATED ELECTRICAL GLANDS SPARE PARTS KITS TEMPERATURE LIMITS EXTERNAL VALVES AND FITTINGS Heaters arr has designed standard reactors designed for tempera- cooling channels are also Pelectrical heaters for all tures to 600 °C and for large included. of the reactors in our product multi-zone heaters. Aluminum block heaters line. Different types of heaters have three distinct features are used for individual reactors Optional and Custom which make them ideal for to best meet the operational Heaters. many applications: needs, heating load, and Parr offers a variety of expected operating tem- heater designs which can be 1. Since the heating elements peratures. The standard heater substituted for the standard are sealed within these type and power rating for each heater normally furnished with housings, explosive vapors reactor model is listed in the each reactor. Most of these cannot reach them and the reactor specification tables. can also be used with Parr heater can be considered The standard designs will typi- non-stirred pressure vessels explosion proof, provided cally be one of the following: as well. The principal features it is equipped with optional and recommended applica- explosion proof wiring and Clamp-On Band Heaters tions for these heaters are a safety cut-out to ensure These are normally used described below.
    [Show full text]
  • Mmg25fhican Mobile Diesel Generator
    MMG25FHICAN MOBILE DIESEL GENERATOR SPECIFICATIONS ENGINE Isuzu® 4LE1NYGV-03 - naturally aspirated, diesel engine o Prime - 32 hp @ 1800 rpm o Standby - 35 hp @ 1800 rpm o 4 cylinder o 2.2 L displacement o Tier IV Interim approved Steel, single wall fuel tank o 106 gal. (401.25 L) capacity o 45.4 hr. run time – full load o Fuel tank built into skid of generator set Fuel consumption at prime: o 100% - 1.8 gph (6.8 Lph) o 75% - 1.4 gph (5.3 Lph) o 50% - 0.9 gph (3.4 Lph) Cooling system capable of operating at 120°F (49ºC) ambient Low coolant shutdown Radiator and oil drains plumbed to exterior Rubber vibration dampers isolate engine/generator from frame Disposable air filter - paper element Air filter restriction indicator mounted on control panel 60 Hz engine/generator Droop governed CAN-STANDARD FEATURES 60/40 coolant Block heater Heated fuel filter Liquid containment *Transport Canada tank not required GENERATOR Marathon Electric® o Brushless o 4 pole o Class H insulation Voltage regulation +/- 1% with Marathon SE350 Voltage Regulator Generac Mobile Products LLC l 800-926-9768 l 920-361-4442 l www.generacmobileproducts.com Page 1 of 4 MMG25FHICAN MOBILE DIESEL GENERATOR SPECIFICATIONS SYSTEM OUTPUTS 3 position selector switch + 600V switch o Single phase – 120 / 240V Zig Zag 10 kW / 10 kVA – standby, single phase 9 kW / 9 kVA – prime, single phase o o Three phase – 120 / 208V Low Wye o Three phase – 277 / 480V High Wye o Three phase – 346 / 600V High Wye 10 kW / 10 kVA – standby, single phase 9 kW / 9 kVA – prime,
    [Show full text]