Dsl00063 - Ntr Base Version.Doc
Total Page:16
File Type:pdf, Size:1020Kb
NTR base version Customer socket with PTCR protection Features at Glance This telephone socket includes positive • Easy installation temperature coefficient resistors (PTCR) and • Protection against overcurrent RC group that is removable when necessary. • To be used both as a primary or secondary This kind of socket can be employed for socket on the home plant either primary or secondary use in the home telephonic plant and allows connection of one phone on the front side . In the rear part of the socket there are the polarized IDC In the front part of the socket there is the RJ11 connectors of two way type that consent the attachment connectors that allows the connection of the telephone. of conductors with diameter from 0.4 to 0.6 mm. This kind of socket is simple to install both in square 8 x 8 In particular, there are 2 connectors where one serves for cm boxes and in those of the type UNI 503. attaching the wires from the input line marked “LINEA”, the other one allows the signal to be distributed to the secondary sockets in the customer premises marked “POTS”. Duratel S.p.A Features subject to change - not contractually Via Antonio Meucci 32,, 50041 valid unless specifically authorized by Duratel SpA Calenzano, Florence – Italy dsl00063 - ntr base www.duratel.it version.doc NTR base version MAIN ELECTRICAL and MECHANIC AL FEATURES Component Parameter Requirement/Function Protection of RJ11 connector Rotating shutter Identification of the phone terminal Contact resistance < 40 m Ω RJ11 connector Insulation resistance ≥ 500 MΩ Physical Specifications Material: Polystyrene Contact resistance < 20 m Ω Dimension of body: 75 x 55 x 35 mm Dimension with UNI 503 cover: 120 x 80 x 35 mm Insulation resistance ≥ 500 MΩ Dimension with 8x8 cover: 80 x 80 x 35 mm IDC connector Weight: 70gr Max voltage 1000 V AC Agency Approvals and Certifications ITU-T K20 Max current 3 A ITU-T K21 CE mark Nominal resistance 5 Ω ± 20% RoHS WEEE Trip current 400 mA Standard Package Content Socket body with VDSL2 splitter PTCR Operating current 120 mA N°1 UNI 503 box cover N°1 8x8 box cover N°2 adapter for UNI 503 box 250V 1A → 0.5A t<10s Assembling accessories (screws and spacers) Trip time 250V 0.4A → 0.2A t<60s INSTALLATION FEATURES In -wall box 8x8 In-wall box UNI 503 Out-wall rectangular box Duratel S.p.A Features subject to change - not contractually Via Antonio Meucci 32,, 50041 valid unless specifically authorized by Duratel SpA Calenzano, Florence – Italy dsl00063 - ntr base www.duratel.it version.doc .