Operator's Manual Chameleon Ultra™ and Chameleon Vision™ Diode-Pumped Lasers
Total Page:16
File Type:pdf, Size:1020Kb
Operator’s Manual Chameleon Ultra™ and Chameleon Vision™ Diode-Pumped Lasers 5100 Patrick Henry Drive Santa Clara, CA 95054 Chameleon Ultra & Chameleon Vision Operator’s Manual This document is copyrighted with all rights reserved. Under the copyright laws, this document may not be copied in whole or in part or reproduced in any other media without the express written permission of Coherent, Inc. Permitted copies must carry the same proprietary and copyright notices as were affixed to the original. This exception does not allow copies to be made for others, whether or not sold, but all the material purchased may be sold, given or loaned to another person. Under the law, copying includes translation into another language. Coherent, the Coherent Logo, Chameleon Ultra, Chameleon Vision, Verdi, PowerTrack, FAP-I and FieldMax are registered trademarks of Coherent, Inc. Every effort has been made to ensure that the data given in this document is accurate. The information, figures, tables, specifications, part numbers and schematics contained herein are subject to change without notice. Coherent makes no warranty or representation, either expressed or implied, with respect to this document. In no event will Coherent be liable for any direct, indirect, special, incidental or consequential damages resulting from any defects in its documentation. Technical Support In the United States: Should you experience any difficulties with your laser or need any technical information, visit our web site www.Coherent.com. Additional support can be obtained by contacting our Technical Support Hotline at 1-800-367-7890 (1-408-764-4557 outside the U.S.) or E-mail ([email protected]). Telephone coverage is available Monday through Friday (except U.S. holidays and company shutdowns). If you call outside our office hours, your call will be taken by our answering system and will be returned when the office reopens. If there are technical difficulties with your laser that cannot be resolved by support mechanisms outlined above, E-mail or telephone Coherent Technical Support with a description of the problem and the corrective steps attempted. When communicating with our Technical Support Department, via the web, telephone, or E-mail, the model and Laser Head serial number of your laser system will be required by the Support Engineer responding to your request. Outside the United States: If you are located outside the U.S. visit our web site for technical assistance or contact, by phone, our local Service Representative. Representative phone numbers and addresses can be found on the Coherent web site, www.Coherent.com. Coherent provides telephone and web technical assistance as a service to its customers and assumes no liability thereby for any injury or damage that may occur contemporaneous with such services. These support services do not affect, under any circumstances, the terms of any warranty agreement between Coherent and the buyer. Operation of any Coherent laser with any of its interlocks defeated is always at the operator's own risk. ii Table of Contents TABLE OF CONTENTS Preface ................................................................................................................................. xii U.S. Export Control Laws Compliance ............................................................................... xii Symbols Used in This Manual and on the Laser System ................................................... xiii Section One: Description and Specifications.................................................. 1-1 System Description ............................................................................................................. 1-1 Chameleon Ultra and Chameleon Vision Laser Heads.............................................. 1-3 Verdi Laser Head .............................................................................................. 1-3 PowerTrack ....................................................................................................... 1-4 VPUF Laser Head............................................................................................. 1-4 Spectrometer ..................................................................................................... 1-5 Miniature Recirculating Unit (MRU) ........................................................................ 1-5 Power Supply............................................................................................................. 1-6 Servo Loops ...................................................................................................... 1-6 Laser Diode Assembly...................................................................................... 1-6 Umbilical Cable ......................................................................................................... 1-7 Installation ................................................................................................................. 1-7 Specifications...................................................................................................................... 1-7 Section Two: Laser Safety .......................................................................................... 2-1 Optical Safety ..................................................................................................................... 2-1 Safety Features and Compliance to Government Requirements ........................................ 2-2 Laser Classification.................................................................................................... 2-3 Protective Housing..................................................................................................... 2-3 Laser Radiation Emission Indicators ......................................................................... 2-3 Beam Attenuator ........................................................................................................ 2-3 Operating Controls..................................................................................................... 2-3 Location of Safety Labels .......................................................................................... 2-4 Electromagnetic Compatibility ........................................................................................... 2-4 Section Three: Installation......................................................................................... 3-1 Receiving and Inspection.................................................................................................... 3-1 External Interlock ............................................................................................................... 3-1 Cooling Water – Laser Head............................................................................................... 3-3 MRU Operating Parameters................................................................................................ 3-3 Installation Considerations ................................................................................................. 3-7 Install the Power Supply ..................................................................................................... 3-9 Install the Laser Head ......................................................................................................... 3-9 Umbilical Connection ......................................................................................................... 3-9 Install the MRU X1........................................................................................................... 3-11 Install the Chiller .............................................................................................................. 3-12 Turn-On Procedure ........................................................................................................... 3-13 iii Chameleon Ultra & Chameleon Vision Operator’s Manual Section Four: Daily Operation ................................................................................ 4-1 Operation ............................................................................................................................ 4-1 Turning the System On .............................................................................................. 4-1 Cold Start .......................................................................................................... 4-1 Warm Start ........................................................................................................ 4-2 Turning the System Off.............................................................................................. 4-4 Daily Use .......................................................................................................... 4-4 Complete Shut-down ........................................................................................ 4-4 Controls, Indicators and Features ....................................................................................... 4-6 Menu Displays .................................................................................................................. 4-10 System Status Messages .......................................................................................... 4-10 Fault Handling ......................................................................................................... 4-10 Section Five: External Computer Control ....................................................... 5-1 How to Interface the Chameleon Ultra or