DOCSLIB.ORG

XTX-US15WP Intel® Atom™ Z510P

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
XTX-US15WP Intel® Atom™ Z510P Avnet Embedded. Support Around The Board™ Avnet EmbeddEd SpEcification. datasheet Avalue XTX-US15WP www.avnet-embedded.eu Intel® Atom™ Z510P/ Z530P XTX Module with XTX-US15WP Intel® US15WP Chipset Features ® Intel US15WP Chipset n Intel® Atom™ Z510P/ Z530P CPU n Intel® US15WP Chipset n One 200-pin SODIMM Up to 2GB DDR2 400/ 533SDRAM n Dual View, Dual LVDS Intel® Atom™ n Intel® High Defi nition Audio Z510P/ 530P CPU n Realtek 8103E LAN n 1 PCIex1, 4 PCI, 1 LPC Bus, Micro SD n 2 SATA, 6 USB, 4 COM (2 Optional) One 200-pin SODIMM up n Wide Temperature Design to 2 GB DDR2 SDRAM ® 1 AtomTM Intel 4 PCI LPC Bus US15WP PCIex1 Micro Wide 2 SATA 6 USB 4 COM SD Temp. Speci cations System Audio • CPU Onboard Intel® Atom™ Z510P/ Z530P CPU • AC97 Codec Realtek ALC883 ETX/XTX/COM Express • BIOS Award 8Mbit Flash BIOS • Audio Interface Line-in, Line-out, Mic-in AC97 Rev2.2 Compatible, Digital High Defi nition Audio • System Chipset Intel® US15WP Chipset Interface with Support for Multiple Audio Codecs • I/O Chip Winbond W83627DHG • System Memory One 200-pin SODIMM Socket Supports Up to 2GB DDR2 400 SDRAM (Z530 can also support DDR 400) Ethernet • SSD 1 x Micro SD Slot • LAN Realtek 8103E • Watchdog Timer Reset: 1 ~ 255min. and 1sec. or 1min./step • Ethernet Interface 10/ 100 Base-Tx Fast Ethernet Compatible • H/W Status Monitor Monitoring System Temperature, Voltage, and Cooling Fan Status. Auto Trotting Control When CPU Overheats Mechanical & Environmental • Expansion 1 x PCIex1, 4 x PCI, 1 x LPC Bus • Power Requirement +5V, +5Vsb (for ATX Only) • ACPI Single Power ATX Support S0, S3, S4, S5 I/O ACPI 1.0b and 2.0 Compliant • MIO 1 x EIDE, 2 x SATA, 1 x FDD/ LPT, 4 x TTL Serial • Power Type AT/ ATX (2 Optional), 1 x KB & Mouse • Operating Temperature Standard Version: 0 ~ 60°C (32~140°F) • USB 6 x USB 2.0 Wide Temp. Version: -40 ~ 85°C (-40~194°F) • IrDA 115Kbps, IrDA 1.0 Compliant • Operating Humidity 0% ~ 90% Relative Humidity, Non-condensing • Size (L x W) 4.5" x 3.7" (114mm x 95mm) • Weight 0.44lbs (0.2kg) Display • Chipset Intel® Advanced Low Power Graphics Suporting 3.0 Shader and Texture • Display Memory Intel® Poulsbo Graphics Core Supports Up to 256MB for Dynamic Video Memory • Resolution LCD/ Simultaneous Mode: 1366 x 768 • Multiple Display Dual LVDS Ordering Information • LCD Interface Dual-Channel 18/ 24-bit LVDS (from SDVO) • XTX-US15WP-510 Single-Channel 18/24-bit LVDS (from US15WP, Onboard) Intel® Atom™ Z510P XTX Module with Intel® US15WP Chipset • XTX-US15WP-530 Intel® Atom™ Z530P XTX Module with Intel® US15WP Chipset • XTX-US15WPT-510 Intel® Atom™ Z510PT XTX Module with Intel® US15WPT Chipset, Wide Temperature -40 ~ 85°C • ACC-HSP-2752-2R Heatspreader for XTX-US15WP 6-10 www.avnet-embedded.eu Avnet EmbeddEd OFFICES. DenmArk GERMAnY (AuSTRIA, cZEcH rEPUBLIC, UNITEd KINGDOM (IRELAND) Avnet Embedded HUNGArY, POLAND, SWiTZErLAND) Avnet Embedded Avnet Nortec A/S Avnet Embedded Avnet EMG Ltd. Ellekær 9 Avnet EMG GmbH Pilgrims Court, 15/17 West Street 2730 Herlev Gruber Straße 60c Reigate, Surrey, RH2 9BL Phone: +44 1737 227800 Phone: +45 3678 6250 85586 Poing Fax: +44 1737 243872 Fax: +45 3678 6255 Phone: +49 8121 775 500 [email protected] [email protected] Fax: +49 8121 775 550 [email protected] finland Avnet Embedded Avnet Embedded Avnet Nortec Oy Avnet EMG GmbH Tiilenpolttajankuja 3 A B Lötscher Weg 66 1720 Vantaa 41334 Nettetal Phone: +358 207 499260 Phone: +49 8121 775 500 Fax: +358 942 597446 Fax: +49 8121 775 550 [email protected] [email protected] frAncE iTALY (PORTuGAL, SpAIN) Avnet Embedded Avnet Embedded Avnet EMG France SA Avnet EMG Italy SRL Immeuble 154, Parc Chene 2 Via Manzoni, 44 5, allée du General Benoist 20095 Cusano Milanino 69000 Bron Phone: +39 02 66092 1 Phone: +33 4 72 81 02 30 Fax: +39 02 66092 498 Fax: +33 4 72 81 02 34 [email protected] [email protected] nETHErLANDS (BELGIUM, LuXEmBOURG) Avnet Embedded Avnet Embedded Avnet EMG France SA Avnet B.V. 4, rue de la Couture Takkebijsters 2 Bâtiment Milan, BP 20209 4802 BL Breda All trademarks and logos are the property of their 94518 Rungis Cedex Phone: +31 76 5722400 respective owners. This document provides a brief Phone: +33 1 49 78 88 88 overview only and is not intended to be complete Fax: +31 76 5722404 Fax: +33 1 49 78 88 89 or binding offer. Product information, including [email protected] information related to a product‘s specifications, [email protected] uses or conformance with legal or other requirements, is obtained by Avnet from its suppliers Avnet Embedded SWEdEn (NORWAY) or other sources deemed reliable and is provided Avnet EMG France SA Avnet Embedded by Avnet on an „As Is“ basis. Avnet makes no representation as to the accuracy or completeness ZA la Hallerais le Semiramis Avnet Nortec AB of the product information and Avnet disclaims all 2, allée du Communel Esplanaden 3 D representations, warranties and liabilities under 35770 Vern sur Seiche 172 67 Sundbyberg any theory with respect to the product information, Phone: +33 2 99 77 37 02 Phone: +46 8 564 725 50 including any implied warranties of merchantability, fitness for a particular purpose, title and/or non- Fax: +33 2 99 77 33 38 Fax: +46 8 760 01 10 refringement. All product information is subject to [email protected] [email protected] change without notice. Local Avnet EmbeddEd BuSinesses: 05/2010.
Load more

Recommended publications
  • In This Video We Are Going to See How a Personal Computer Hardware Is Organised the PC Was Designed with an Open Architecture
    In this video we are going to see how a personal computer hardware is organised The PC was designed with an open architecture. This means that it uses standard modular components. We can add, replace, update or swap them easily and the computer will identify and handle the new devices automatically. The main component of a computer system is the motherboard or main board. It is a printed circuit board (PCB) that holds the main components of the computer and the electronics needed to communicate between them and to expand the system. We could say that it is the central nervous system of the computer. A motherboard provides the electrical connections by which the other components of the system communicate. Unlike a backplane, it also contains the central processing unit and hosts other subsystems and devices The form factor is the specification of a motherboard – the dimensions, power supply type, location of mounting holes, number of ports on the back panel, etc. In the IBM PC compatible industry, standard form factors ensure that parts are interchangeable across competing vendors and generations of technology, while in enterprise computing, form factors ensure that server modules fit into existing rack mount systems. Traditionally, the most significant specification is for that of the motherboard, which generally dictates the overall size of the case. The most used form factor for IBM PC compatible motherboards is ATX (Advanced Technology Extended) and its derivatives. For small form factor mainboards mini ITX is the de facto standard. A power supply unit (PSU) converts mains AC to low- voltage regulated DC power for the internal components of a computer.
    [Show full text]
  • PCI/104-Express and Pcie/104 Specification
    PCI/104-Express™ & PCIe/104™ Specification Including Adoption on 104™, EPIC™ and EBX™ Form Factors Version 2.10 February 18, 2013 Please Note This specification is subject to change without notice. While every effort has been made to ensure the accuracy of the material contained within this document, the PC/104 Consortium shall under no circumstances be liable for incidental or consequential damages or related expenses resulting from the use of this specification. If errors are found, please notify the PC/104 Consortium. The PC/104 logo, PC/104, PC/104-Plus, PCI-104, PCIe/104, PCI/104-Express, 104, EPIC and EBX are trademarks of the PC/104 Consortium. All other marks are the property of their respective companies. Copyright 2007 - 2013, PC/104 Consortium IMPORTANT INFORMATION AND DISCLAIMERS The PC/104 Consortium (“Consortium”) makes no warranties with regard to this PCI/104-Express and PCIe/104 Specifications (“Specifications”) and, in particular, neither warrant nor represent that these Specifications or any products made in conformance with them will work in the intended manner. Nor does the Consortium assume responsibility for any errors that the Specifications may contain or have any liabilities or obligations for damages including, but not limited to, special, incidental, indirect, punitive, or consequential damages whether arising from or in connection with the use of these Specifications in any way. This specification is subject to change without notice. While every effort has been made to ensure the accuracy of the material contained within this document, the publishers shall under no circumstances be liable for incidental or consequential damages or related expenses resulting from the use of this specification.
    [Show full text]
  • The Worldwide Merchant Embedded Computing Market 2018 Edition
    THE WORLDWIDE MERCHANT EMBEDDED COMPUTING MARKET 2018 EDITION A Comprehensive Report on the Latest Embedded Computing Technologies Plus Forecasts of Key Markets Report Highlights Technical Trends PCI C ompactPCI AdvancedTCA PC/104 AdvancedMC MicroTCA COM Express PMC VMEbus OCP Market Trends Total Available Market Competitive Strategies Corporate Relations Industry Analysis and Forecast, 2015-2022 MEC Market Total A vailable MEC Market By Segment (Communications, Industrial, Medical, Aerospace/Military, Other Applications) Company Profiles (89) New Venture Research Corp. A Technology Market Research Company 337 Clay St., Suite 101 [email protected] Nevada City, CA 95959 www.newventureresearch.com Tel: (530) 265-2004 Fax: (530) 265-1998 The Worldwide Merchant Embedded Computing Market - 2018 Edition Synopsis The Worldwide Merchant Embedded The Industrial market segment also holds strong Computing Market - 2018 Edition report potential for the process control industries (oil & gas, analyzes the performance of the standards-based mining, agriculture, paper/pulp and textiles) as the and non-standards-based industry from 2015 - Industrial Internet of Things begins to impact 2022. Although there are several hundred manufacturing and engage Big Data solutions for companies in the standards-based MEC market, increased productivity and output. Related industries most are fairly small in revenue and highly like robotics will require high performance designs specialized, focusing on specific application that utilize advanced artificial intelligence and virtual segments with unique product requirements. reality solutions. Clean energy is also examined for However, the report also examines the world’s optimizing efficiency in solar, wind and tidal technical leading contract manufacturers that participate in solutions. the non-standards-based product assemblies in the same market segments.
    [Show full text]
  • Qseven MSC Q7-MB-RP3
    Qseven MSC Q7-MB-RP3 Description Qseven™ 2.0 Evaluation Board The MSC Q7-MB-RP3 is the third generation reference platform provided to test and qualify Qseven™ Rev. 2.0 modules for compatibility with the SGET specification. The board is shipped with a complete set of design files. An extensive design guide for the Qseven™ module technology is also provided to allow the motherboard designer to easily implement a custom version of a Qseven™ carrier. The Qseven™ Rev. 2.0 reference platform MSC Q7-MB-RP3 offers a large variety of interfaces commonly used in industrial applications such as Gigabit LAN, USB 3.0/2.0, RS232 and CAN as well as HDMI, DP and LVDS 435 x 170 for display attachment. In addition PCI Express is supported with one x16 and three PCIe x1 slots. This platform for N.A. rapid prototyping helps to assess the fitness of a specific CPU Technology. It is a key instrument to shorten design N.A.N.A. cycles and to improve time to market of new Qseven™ based systems. Highlights . One PCI Express™ x16 slot and 3 x1 slots . Two graphic card slots for HDMI / DP / eDP / LVDS . Mini PCI Express™ & mSATA slot . SD Card socket and SIM Card slot . Two SATA onboard connectors . Winbond W83627DHG Super I/O . EXAR X28V384 Super I/O . 7x COM, HW monitor . CAN Transceiver . HD audio codec . USB 3.0, 4x USB 2.0 Host and USB 2.0 Client interfaces avnet.com/embedded Qseven Technical Data - MSC Q7-MB-RP3 Formfactor Wide-ATX Storage Interfaces 2x SATA USB USB 3.0, 4x USB 2.0 Host, USB 2.0 Client Serial Interfaces 2x COM from Winbond Super I/O 4x COM from EXAR Super I/O 1x COM from Qseven module Bus Interfaces PCI express x16, 3x PCIe x1 Display Interfaces HDMI, DP, eDP, LVDS on add-on cards Network Interface GbE Audio Interface HD Audio on 6 connectors + S/PDIF Power Requirement 12V on standard connectors Certificates UL avnet.com/embedded Qseven Order Reference - MSC Q7-MB-RP3 Order Description Reference Cat Number 1135005 The MSC Q7-MB-RP3 is a reference platform designed for evaluation and MSC Q7-MB-RP3 PV test of Qseven Rev.
    [Show full text]
  • Picopsu-120-WI-25 12-25V, 120Watt ATX Power Supply
    picoPSU-120-WI-25 12-25V, 120Watt ATX Power Supply Quick Installation Guide Version 1.0b P/N picoPSU-120-WI-25 ATX DC-DC Converter Series Introduction The picoPSU-120-WI-25 is a small yet powerful and fully compliant ATX power supply designed to power a wide variety of motherboard from a single 12-25V unregulated power source. The picoPSU-120-WI-25 is the only “plug-in” wide input range power supply solution for general purpose low power motherboards. Compatible with most VIA C3/C7 CPUs M/B and with Pentium-M / Core Duo boards, picoPSU-120-WI-25 provides cool, 100% silent power for your system. The PICOPSU-120-WI-25 has many advantages over a regular power supply: -Smallest ATX PSU to date -100% silent operation -Low heat dissipation with combined efficiency over 94% -Plugs directly into the motherboard’s power connector, no cable mess Quick installation Instructions The PICOPSU-120-WI-25 has been specifically designed for the Mini- ITX form factor, thus eliminating the need for ATX power cables. It is also 1U compliant – height will not exceed the 1U formfactor. 1) After the picoPSU module was ‘snapped in’, hook the hard drive power or floppy power to your floppy/hard drives. If more hard drives or floppy connectors are needed, use a HDD/floppy “Y” splitter cable. 2) picoPSU-120-WI-25 Quick Installation Guide Page 2 ATX DC-DC Converter Series 2) Connect a 12-25VDC power adapter (peak should not exceed 26.5V) to the input connector. 3) Turn on the PC using the motherboard ON/OFF switch Typical configuration The picoPSU-120-WI-25 has been tested with all mini-ITX board under virtually any disk/floppy/CDROM/PCI configuration.
    [Show full text]
  • Embedded Computing Highlights About Congatec 02|03
    Product Guide Spring 2014 EMBEDDED COMPUTING HIGHLIGHTS About congatec 02|03 congatec AG is the preferred global vendor for innovative embedded solutionsto enable competitive advantages for our customers. Letter from the CEO Since the company’s inception in December Moreover, we bolstered our sales presence in adopting in order to not only offer benefits for 2004, congatec AG has established itself as a Australia and New Zealand through opening customers, but also to further tap target markets. globally recognized expert and reliable partner a new branch in Queensland. The Australian for embedded computer-on-modules solutions, market offers great potential, especially in the This would all be impossible without our coupled with excellent service and support. We segments of entertainment (gaming), agricultural employees’ commitment. I would like to take have secured second ranking worldwide in our technology, transportation management and this opportunity to again express my thanks to all market segment within the space of just eight medical technology, where congatec products congatec employees. In the passion with which years after our founding thanks to our clear can be deployed optimally. they pursue their daily activities, and through focus. customer-orientation, creativity and team Following the opening of the branches in Japan spirit, they have already brought the company congatec has already ranked among the Deloitte Australia, congatec is now represented with six to a leading position, and, together with the On our way to market leadership Technology Fast 50 for the second consecutive branches on four continents – Asia (Taiwan and company’s management, continue to stand for year1. This award distinguishes Germany’s Japan), Australia, Europe (Germany and the a sustainable and partnership-based corporate congatec AG, headquartered in Deggendorf, highest-growth technology companies.
    [Show full text]
  • Features Pcie/104 Qseven
    PCIE/104 QSEVEN CARRIER BOARD PART NUMBER: QCG001 Connect Tech’s PCIe/104 Qseven Carrier Board is a small embedded carrier board that allows complete integration with any industry standard Qseven module. This carrier board utilizes the PC/104 form factor with 4 x1 PCIe lanes, and the PCIe/104 bus. The on-board connectors enable connection to SATA, USB, Ethernet, LVDS Video, VGA Video, and RS-232 & RS-422/485. Easily upgrade to the latest processor and memory technology while maintaining the I/O interfaces. FEATURES ✓ PCIe/104 form factor ✓ Uses any off-the-shelf Qseven module ✓ Ideal for applications with low ✓ Connectors and cables included for power requirements easy connection to Qseven features Custom Design Services Note: Qseven CPU module mounted Can’t find the feature you need or require a different form factor? on bottom side. Qseven module sold separately. The PCIe/104 Qseven Carrier Board allows you to prototype your application, while Connect Tech’s design services creates a custom solution. SPECIFICATIONS Form Factor PCIe/104, 4 x1 PCIe lanes Display VGA, LVDS flat panel Storage 2x SATA Serial Interface 2x RS-232, 2x RS-485 USB 4x USB 2.0 Ethernet 1x Gigabit Ethernet Dimensions PC/104 compliant Temperature -20°C to 70°C (-4°F to 158°F) Power ATX supply input Additional I/O PS/2 keyboard and mouse Warranty and Accessories Optional Cable Kit 2 Year Warranty and free technical support Support Specifications subject to change without notice. ©2020 Connect Tech Inc. All trademarks are property of their respective holder. CTIX-00076(0.05) - 2021-07-20 Connect Tech Inc.
    [Show full text]
  • ETX Driving Embedded
    An ACCES I/O Products Whitepaper ETX Driving Embedded I/O ACCES I/O Products, Inc., 10623 Roselle Street, San Diego, CA 92121 (858) 550-9559 • Fax (858) 550-7322 • [email protected] • www.accesio.com One of the fastest-growing concepts in the embedded world is the “computer-on-module” or COM.The COM approach takes the traditional concept of a computer motherboard with plug- in I/O modules and turns it around so that the motherboard, now called a baseboard, con- tains all the I/O and the CPU with its core support chips and memory plug in as a module. The result of this reversal is an approach that blends the advantages of custom design with those of standard products. Products based on the COM approach maintain long-term viabil- ity while retaining access to the latest in computer technology. One of the principal COM implementations available in the market is the Embedded Technology eXtended (ETX) specification, first developed by Kontron in early 2000. The ETX specification defines a module that is approximate- ly 100-mm square (see Figure 1) and contains the core of a personal computer (PC), including CPU, chipset, mem- aper ory, and core I/O capability. The core I/O includes Ethernet, graphics, USB, keyboard, mouse, and serial interfaces along with a PCI/ISA bus for connection to additional peripherals. Four surface-mount connectors route the mod- ule’s I/O to the baseboard, which can be designed to meet an application’s specific needs. P The original ETX specification was quickly adopted in the embedded industry and is now monitored by the ETX Industrial Group (ETXIG), which is dedicated to keeping the specification in line with advancing technology and market needs.
    [Show full text]
  • Micro Fly Cases
    Micro Fly Cases Micro Fly, Micro ATX Case In the past, trying to find a compact case that is still versatile and truly dynamic was a daunting task. But that's all changed now that there's the Ultra Micro Fly! The Micro Fly can utilize any micro ATX motherboard, and because the Micro Fly is 1.5" deeper than similar cases, it can accept standard depth ATX power supplies and standard depth optical drives. Despite Micro Fly's compact size, cooling is never a problem since the Micro Fly comes included with an 80MM fan in the front bringing cool air in, and a 120MM fan in the rear pulling hot air out. The Micro Fly also includes front USB, Firewire and Audio Outputs and is available with an optional, Ultra V-Series 400W power 120mm Fan Full Size ATX Power Supply Bay (Included) (Included In Some Models) supply with custom length cables. Black Includes 400W V-Series PSU Part #: ULT33114 Model #: MFBK400 UPC#: 022769331140 Motherboard 4 Expansion Slots Temperature Display MS-Blue Backplate Includes 400W V-Series PSU Specifications · Expansion Slots: Part #: ULT33115 · Colors: Black, MS Blue, Silver Model #: MFBL400 - 4 Standard Slots UPC#: 022769331157 · 5 Drive Bay: · Rear 120mm Fan 2 - External 5.25" · Front 80mm Fan 1 - External 3.5” · Dimensions: Black w/ Clear Side 2 - Internal 3.5” Includes 400W V-Series PSU - Width: 11.25" · Material: Aluminum Part #: ULT33116 Front Temperature Display, - Height: 9" Model #: MFCLRBK400 USB, Firewire, and Audio Inputs · Form Factor: Micro ATX - Depth: 15” UPC#: 022769331164 Black w/ Clear Side 400 Watt V-Series
    [Show full text]
  • ATX Specification
    ATX Specification Version 2.01 ATX Specification - Version 2.01 New features and additional requirements of Version 2.01 of the ATX specification Please Note Version 2.01 of the ATX Specification incorporates clarifications and some minor changes, as noted below. These changes take into account support for the next generation of ATX motherboards, while maintaining compatibility with the first generation. Readers should examine their combination of motherboard, power supply, and chassis needs to determine whether they require the additional features found in Version 2.01 of the ATX Specification. Changes from Version 2.0 to Version 2.01 of the ATX Specification • Section 2 - Updated Figure 1 to reflect recommendations implemented with Version 2.0. • Section 3.2 - Modified Figure 2 to clarify motherboard mount requirements. • Section 3.3 - Updated table of requirements to reflect changes in the section outlined below. • Section 3.3.5 - Rewrote text to clarify requirements. • Section 3.3.5 - Reduced keepout zone requirement to 0.1” (2.5 mm). This change was based on feedback from chassis manufacturers and is the most significant requirement change with respect to the chassis. • Section 3.3.5 - Added recommendation to avoid paint within the keepout zone. • Section 3.3.5 - Replaced Figure 4 to clarify chassis I/O aperture requirements. Tolerances were added to dimensions. • Section 3.3.5 - Changed Figure 5 to define connector placement limitations on the motherboard. This is a new recommendation for motherboard designers to ensure clearance between the chassis and motherboard connectors for the I/O shield. • Section 3.3.5 - Modified Figure 6 to remove redundant dimensions, and removed Figure 7 completely.
    [Show full text]
  • CHAPTER 4 Motherboards and Buses 05 0789729741 Ch04 7/15/03 4:03 PM Page 196
    05 0789729741 ch04 7/15/03 4:03 PM Page 195 CHAPTER 4 Motherboards and Buses 05 0789729741 ch04 7/15/03 4:03 PM Page 196 196 Chapter 4 Motherboards and Buses Motherboard Form Factors Without a doubt, the most important component in a PC system is the main board or motherboard. Some companies refer to the motherboard as a system board or planar. The terms motherboard, main board, system board, and planar are interchangeable, although I prefer the motherboard designation. This chapter examines the various types of motherboards available and those components typically contained on the motherboard and motherboard interface connectors. Several common form factors are used for PC motherboards. The form factor refers to the physical dimensions (size and shape) as well as certain connector, screw hole, and other positions that dictate into which type of case the board will fit. Some are true standards (meaning that all boards with that form factor are interchangeable), whereas others are not standardized enough to allow for inter- changeability. Unfortunately, these nonstandard form factors preclude any easy upgrade or inexpen- sive replacement, which generally means they should be avoided. The more commonly known PC motherboard form factors include the following: Obsolete Form Factors Modern Form Factors All Others ■ Baby-AT ■ ATX ■ Fully proprietary designs ■ Full-size AT ■ micro-ATX (certain Compaq, Packard Bell, Hewlett-Packard, ■ ■ LPX (semiproprietary) Flex-ATX notebook/portable sys- ■ WTX (no longer in production) ■ Mini-ITX (flex-ATX tems, and so on) ■ ITX (flex-ATX variation, never variation) produced) ■ NLX Motherboards have evolved over the years from the original Baby-AT form factor boards used in the original IBM PC and XT to the current ATX and NLX boards used in most full-size desktop and tower systems.
    [Show full text]
  • Download the PDF Handout
    For the free video please see http://itfreetraining.com/ap/1b25 In this video from ITFreeTraining, I will look at the different form factors that are available for computers. The form factors determine the design constraints for the motherboard, case and power supply. All three need to conform to the form factor design specification to ensure that they will work together. Copyright 2020 © http://ITFreeTraining.com Form Factors • Defines dimensions and layouts Motherboard sizes PSU and connectors IO/Panel Computer cases 0:18 To start with, I will look at what a form factor is. A form factor defines the dimensions and layouts that can be used for the motherboard, power supply and the computer case. You will find that motherboards designed to meet a form factor specification will be the same size or very close. On closer inspection, you will find the drill holes are in the same place. This ensures that when you buy a motherboard of a particular form factor it will always fit inside a computer case that supports that form factor. The motherboard is attached to the computer case by standoffs. Standoffs are brass or plastic that attach to the computer case and provide somewhere for the screws to screw into. The form factor also defines the power supply unit and the connectors that are used on the power supply. This is why you will find that different power supplies are the same shape and have the same connectors on them. The form factor also defines the size of the area that will be used by the input and output connectors otherwise known as IO connectors.
    [Show full text]