DOCSLIB.ORG

1 CCPUD Eng-Dispatch Generator TITLE PAGE

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
1 CCPUD Eng-Dispatch Generator TITLE PAGE Project Manual For: CLALLAM COUNTY PUD #1 ENGINEERING / DISPATCH GENERATOR 110 IDEA PLACE, SEQUIM, WA. Owner: Clallam County PUD #1 Project: #12-23 Date: March 25, 2016 GENERAL CONSTRUCTION PACKAGE LA WHEAD ARCHITECTS P.S. 12342 NORTHUP WAY BELLEVUE, WA. 98005 425-556-1220 CLALLAM COUNTY PUD #1 TABLE OF CONTENTS ENGINEERING/DISPATCH GENERATOR JOB NO. 12-23 Division 1 - GENERAL REQUIREMENTS Section 01 11 00 Summary of the Work Section 01 25 13 Product Substitution Procedures (Substitution Request Form) Section 01 29 00 Payment Procedures Section 01 31 13 Project Coordination Section 01 33 23 Submittals, Shop Drawings, Product Data Section 01 42 00 Standards and Abbreviations Section 01 42 16 Definitions and Explanations Section 01 45 29 Testing Laboratory Services Section 01 50 00 Temporary Facilities and Controls Section 01 57 13 Temporary Erosion and Sediment Control Section 01 60 00 Material and Equipment Requirements Section 01 71 23 Grades, Lines and Levels Section 01 73 29 Cutting & Patching Section 01 74 23 Cleaning Section 01 77 19 Contract Closeout Requirements Section 01 78 23 Operation and Maintenance Data Section 01 78 36 Warranties Section 01 78 39 Record Documents Section 01 79 00 Demonstration and Training Part II -- TECHNICAL SPECIFICATIONS Division 2 – EXISTING CONDITIONS Section 02 41 13 Selective Site Demolition Division 3 - CONCRETE Section 03 30 13 Site Concrete Division 6 - WOOD AND PLASTICS Section 06 10 00 Rough Carpentry Division 7 - THERMAL AND MOISTURE PROTECTION Section 07 92 00 Joint Sealers Division 9 - FINISHES Section 09 29 00 Gypsum Board Section 09 91 00 Painting TABLE OF CONTENTS – 1 / 2 CLALLAM COUNTY PUD #1 TABLE OF CONTENTS ENGINEERING/DISPATCH GENERATOR JOB NO. 12-23 Division 23 Section 23 11 26 Propane Gas Piping Systems Division 26 – ELECTRICAL Section 26 00 00 Electrical Basic Requirements Section 26 05 19 Low-voltage Electrical Power Conductors & Cables Section 26 05 26 Grounding and Bonding for Electrical Systems Section 26 05 29 Hangers and Supports for Electrical Systems & Equipment Section 26 05 33 Raceways Section 26 05 53 Identification For Electrical Systems Section 26 05 73 Electrical Distribution Systems Studies Section 26 24 16 Panelboards Section 26 28 00 Overcurrent Protective Devices Section 26 32 14 Gas-Fired Engine Generators Section 26 36 00 Transfer Switches Division 32 – EXTERIOR IMPROVEMENTS Section 31 23 00 Excavation and Fill Section 32 11 00 Base Courses Section 32 12 16 Asphalt Paving TABLE OF CONTENTS – 2 / 2 CLALLAM COUTY PUD #1 01 11 00 ENGINEERING/DISPATCH GENERATOR SUMMARY OF WORK JOB NO. 12-23 PART 1 – GENERAL 1.01 SUMMARY: A. The proposed work includes a new emergency generator and automatic transfer switch at the existing Clallam PUD#1 Operations Center at 110 Idea Place, Sequim, WA. 98382, as described in the construction documents prepared by Lawhead Architects, P.S., together with their consultants. B. Project Description: The Work is described briefly as follows without force or effect on other parts of the contract documents: Work under the basic scope shall include all work as described in the Contract Documents, Drawings and Project Manual. The proposed work includes, but is not limited to, a new emergency generator and automatic transfer switch and all related electrical work at the existing Clallam PUD#1 Operations Center at 110 Idea Place, Sequim WA, as described in the construction documents prepared by Lawhead Architects, P.S., together with their consultants. Site work includes, but is not limited to, relocation of existing an propane tank, removal of existing concrete slab, curbs, and asphalt paving, excavation and backfill, and trenching as needed for placement of new underground LP fuel tanks and piping; saw cut and demolition of an existing concrete sidewalk; placement of new concrete slabs and curbs for emergency generator and relocated tank; trench backfill and asphalt repair. 1.02 SCHEDULING: A. It may be anticipated that work at Site may begin immediately following written Notice to Proceed and Preconstruction Conference. Contractors shall coordinate with Clallam County PUD #1 for project start. B. The Date of Substantial Completion shall be determined as follows: Substantial Completion shall be achieved one hundred eighty (180) consecutive calendar days following written Notice to Proceed. Final Completion shall be one hundred ninety- five (195) consecutive calendar days following written Notice to Proceed. C. Allow Clallam County PUD #1 to occupy and use all facilities the day following Substantial Completion. 1.03 EARLY WORK: A. Comply with requirements for submittals and samples in Section 01 33 23. B. Mobilize workers and stock materials in anticipation of construction start. 1.04 CONTRACTOR'S USE OF PREMISES: A. Only the area designated within the limits of construction is available to the Contractor for storage, staging, and construction. The remaining areas of the property will continue in active operation by the Owner. Access to the construction area is provided through a secure gate and within active parking and driveway areas. Coordinate with Clallam 01 11 00 – 1 / 3 CLALLAM COUTY PUD #1 01 11 00 ENGINEERING/DISPATCH GENERATOR SUMMARY OF WORK JOB NO. 12-23 County PUD #1 for definition of any areas that require additional protection. Assume full responsibility for the protection and safekeeping of the work under this Contract and of materials and products stored on the site. Secure materials and the construction area. B. Move stored products that interfere with operations of Clallam County PUD #1, users of adjacent properties, or separate contractors. C. Obtain and pay for the use of additional storage or work areas needed for operations. D. Do not load structures or permit structures to be loaded with weights that will endanger a structure. E. Following completion of the work, restore surrounding areas to their original condition. Dress the existing areas with additional material as needed to achieve the original grades. Replace paving damaged by construction activity. 1.05 OWNER-FURNISHED PRODUCTS: A. Definition: Products furnished by Clallam County PUD #1, their agents, and/or suppliers for use in the construction or for installation by the Contractor. B. Owner's Responsibilities: 1. Arrange for and deliver necessary shop drawings, product data, and samples of Owner-furnished products to the Contractor, through the Architect. 2. Arrange and pay for delivery of Owner-furnished products to the site, in accordance with the Construction Schedule. C. Contractor's Responsibilities: 1. Designate delivery dates for products in the Construction Schedule. 2. Review shop drawings, product data, and samples of Owner-furnished products and materials to be used in the construction or installed by the Contractor. Return to Architect with notification of discrepancies or problems anticipated in the use of the products. 3. Receive and unload products at the site. 4. Promptly inspect products jointly with the Owner’s representative and record shortages, damaged or defective items. 5. Handle products at the site, including uncrating and storage. 6. Protect products from exposure to elements and from damage. 7. Install, connect, and finish products. 8. Repair or replace items damaged as a result of Contractor's responsibilities. PART 2 - PRODUCTS Not Used. 01 11 00 – 2 / 3 CLALLAM COUTY PUD #1 01 11 00 ENGINEERING/DISPATCH GENERATOR SUMMARY OF WORK JOB NO. 12-23 PART 3 - EXECUTION Not Used. End of Section 01 11 00 01 11 00 – 3 / 3 CLALLAM COUNTY PUD #1 SECTION 01 25 13 ENGINEERING/DISPATCH GENERATOR PRODUCT SUBSTITUTION JOB NO. 12-23 PROCEDURES PART 1 – GENERAL 1.01 RELATED DOCUMENTS: A. General Conditions, as modified in the Supplementary Conditions. 1.02 CONTRACTOR'S OPTIONS: A. For products specified by reference standards, or by trade name followed by the words "or equal", select any product meeting standards, by any manufacturer. Submit products to Architect for approval. B. For Products Specified by Naming Products or Manufacturers followed by other words: 1. Select any product and manufacturer named, or 2. Submit request, as required for substitution, for any product not specifically named. 1.03 SUBSTITUTION REQUESTS: A. During bidding, Architect will consider written requests for substitutions received from the General Contractor. Substitution requests must be received by the Architect a minimum of ten (10) calendar days prior to the date bids are to be received. 1. Submit only on form following this Section, which may be copied, or on CSI Substitution Request Form. Make a separate copy for each product proposed. 2. Blank substitution forms are available at the office of the Architect. Forms will not be mailed. 3. If the proposed substitution is approved, such approvals will be set forth in an Addendum. Bidders shall not rely upon approvals made in any other manner. B. After date of Contract, the Owner may consider formal requests from Contractor for substitution of products in place of those specified when submitted in accordance with the requirements of this Section. One or more of the following conditions must also be documented: 1. The substitution must be required for compliance with final interpretation of code requirements or insurance regulations. 2. The substitution must be due to the unavailability of the specified products, through no fault of the Contractor. 3. The substitution may be requested when subsequent information discloses the inability of the specified products to perform properly or to fit in the designated space. 4. The substitution may be due to the manufacturer's or fabricator's refusal to certify or guarantee performance of the specified product as required. 5. The substitution may be requested when it is clearly seen, in the judgment of the Architect that a substitution would be substantially to the Owner's best interests in terms of cost, time, or other considerations. 01 25 13 – 1 / 3 CLALLAM COUNTY PUD #1 SECTION 01 25 13 ENGINEERING/DISPATCH GENERATOR PRODUCT SUBSTITUTION JOB NO.
Load more

Recommended publications
  • City of San Angelo CONCESSIONS BUILDING
    SPECIFICATIONS FOR City of San Angelo CONCESSIONS BUILDING SAN ANGELO, TEXAS 37B West Concho Avenue San Angelo, Tx 76903 p:325.653.2900 f:325.653.2910 POWER SYSTEMS INC. MEP Consultant P.O. Box 2863, San Angelo, Tx. 76902 325.659.2235 SKG Engineering Structural Consultant 706 South Abe Street, San Angelo, Tx. 76903 325.655.1288 November 4, 2014 PROJECT NO. 233-03-0413 TABLE OF CONTENTS City of San Angelo CONCESSIONS BUILDING DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS 00 1000 - 00800 Procurement and Contracting requirements for The City of San Angelo 00 4100 Bid Form DIVISION 01 - GENERAL REQUIREMENTS 01 1100 Summary of Work 01 2500 Substitution Procedures 01 2519 Substitution Request Form 01 2900 Payment Procedures 01 3100 Project Management and Coordination 01 3216 Construction Progress Schedules 01 3300 Submittal Procedures 01 4000 Quality Requirements 01 4523 Testing and Inspection Services 01 5000 Temporary Facilities and Controls 01 5800 Project Identification 01 6000 Product Requirements 01 7700 Closeout Procedures DIVISION 03 - CONCRETE 03 2000 Concrete Reinforcement 03 3000 Cast in Place Concrete DIVISION 05 - METALS 05 1200 Structural Steel Framing DIVISION 06 - WOOD, PLASTICS AND COMPOSITES 06 1100 Wood Framing 06 4100 Custom Cabinets DIVISION 07 - THERMAL AND MOISTURE PROTECTION 07 2115 Batt Insulation 07 2800 Moisture Barriers 07 4213 Metal Wall Panels 07 6100 Standing Seam Roof 07 9200 Joint Sealers DIVISION 08 - OPENINGS 08 1113 Hollow Metal Doors and Frames 08 3313 Overhead Coiling Shutters 08 7100 Door Hardware DIVISION 09 - FINISHES 09 5100 Acoustical Grid Ceilings 09 7733 FRP Panels 09 9100 Painting ©2011, SpexPlus, Inc.
    [Show full text]
  • Project Manual Specifications
    PROJECTSPECIFICATIONS MANUAL BID NO. FOOTHILL HIGH SCHOOL KITCHEN REMODEL 5000 McCloud Drive Rio Linda, CA 95668 Twin Rivers Unified School District General Services – Purchasing 3222 Winona Way, Suite 200 North Highlands, CA 95660 DSA SubmittalApprovedBackchcek Bid Set 1 005858.00001 14602794.1 PROJECT MANUAL AND SPECIFICATIONS Twin Rivers Unified School District Foothill High School Kitchen Remodel Harrington Design Associates Project #. 2022.00 IDENTIFICATION STAMP DIV. OF THE STATE ARCHITECT Owner: APP: 02-118746 INC: Twin Rivers Unified School District REVIEWED FOR 3222 Winona Way, Suite 200 ✔ DDIVISION OF✔SA THE STATE ARCHITECT SS FLS ACS North Highlands, California 95660 DEPARTMENT APPLICATION OF GENERAL SERVICES (916) 566-1600 x50261 DATE:NO. 03/17/2021 02- Perry Herrera – Director of Maintenance and Facilities 115492 Architect: Harrington Design Associates 5875 Pacific Street, Suite E2 Rocklin, California 95677 (916) 577-5789 Francis J. Harrington, AIA California Registration #C-28875 Mechanical/Plumbing Engineer: LP Consulting Engineers, Inc. 1209 Pleasant Grove Blvd. Roseville, California 95678 (916) 771-0778 Sean Pourvakil California Registration #M32311 Electrical Engineer: LP Consulting Engineers, Inc. 1209 Pleasant Grove Blvd. Roseville, California 95678 (916) 771-0778 Alex Saev California Registration #E18211 Harrington Design Associates Twin Rivers Unified School District A/E Project Number 2022.00 Foothill HS Kitchen Remodel TABLE OF CONTENTS Technical Requirements DIVISION SECTION TITLE DIVISION 02 EXISTING CONDITIONS
    [Show full text]
  • Fire Station Specs
    SPECIFICATIONS PAGE 1 OF 4 TABLE OF CONTENTS _________________________________________________________________________ ARCHITECTURAL SPECIFICATIONS: SUMMARY OF WORK DIVISION 1 – GENERAL REQUIREMENTS: 0120 Job Organization 0125 Samples and Shop Drawings 0130-2 Temporary Construction Facilities 0150 Cleaning Up and Damages 0190-2 Prevention of Architectural Barriers to Handicapped Adult DIVISION 2 – SITE WORK: 0201 Subsurface Investigation 0210 Modernization 0225 Termite Protection 0279 Fine Grading and Top Soil 0294 Prefinished Metal Privacy Fence, Gates & Operators DIVISION 4 – MASONRY: 0410 Masonry and Accessories DIVISION 5 – METALS: 0550 Miscellaneous Metals 0570 Expansion Joint Covers DIVISION 6 – WOOD AND PLASTICS: 0616 Wood Construction 0623-2 Millwork and Interior Wood Doors 0631-3 Composite Solid Counters, Sills & Shower Walls DIVISION 7 – THERMAL AND MOISTURE PROTECTION: 0717 Waterproofing and Dampproofing 0719 Caulking and Sealant 0720-2 Thermal Insulation 0735 Polyurethane Spray Insulation 0753-3 Preformed Metal Roof & Soffit/Ceiling Panels 0760 Sheet Metal 0793 F.R.P. Wall Panels DIVISION 8 – DOORS, WINDOWS AND GLASS: 0809-4 Aluminum Frame Doors and Windows 0810 Hollow Metal Doors and Frames 0821-2 Glass Block System SPECIFICATIONS PAGE 2 OF 4 TABLE OF CONTENTS _________________________________________________________________________ 0826 Ceiling Access Panels 0870 Finish Hardware 0887 Glass and Glazing DIVISION 9 – FINISHES: 0919 Exterior Insulation & Finish System 0920 Gypsum Board Drywall System 0930 Ceramic Tile Floors & Base 0934 Resilient Athletic Flooring - Impact 0961 Acoustical Sound Panels 0972 Vinyl Base, Nosings and Accessories 0973 LVT Tile Flooring 0988 Special Concrete Floor Finished 0990 Painting DIVISION 10 – SPECIALTIES: 1028-2 Flag Pole 1034 Over-Head Doors (Base Bid) 1040-2 Bi-fold Apparatus Doors (Add Alternate No. 2) 1040-3 Hi-Speed Apparatus Doors (Add Alternate No.
    [Show full text]
  • HVACR and Metal Roofing Tools
    November 2011 Klenk® Aviation Snips Klenk® Aviation Snips Klenk® Aviation Snips November 2011 Klenk® Aviation Snips Klenk® Offset Aviation Snips Klenk® Bulldog Snips Unique flat blade design makes this the l +Superior Materials, Perfect for T-bar in drop ceilings and extruded easiest turning snip available. aluminum frames +Individual Craftsmanship, and l Cuts heavier gauge metal l New shorter handles with softer grip on upper handle l Ideal for 'S' slips + gives you ergonomic comfort, reducing hand fatigue. A Unique Series of Quality Checks and drives l Precision-ground tips meet together evenly to HVACR and Keep KLENKS cutting long prevent fishhooks, burrs, and tears at end HVACR and Metal Roofing after other snips give out! of each cut. Metal Roofing Tools MODEL # DESCRIPTION Tools MODEL # DESCRIPTION CUT • Klenk® Aviation Snips MA74500 Bulldog Snips, 9" long, :" cut • Crimpers Our Pledge: MA75200 Offset snips, LEFT/STRAIGHT CUT, 102" long, 1d" cut • Pipecutters • Fairmont Tongs ® +DURABILITY MA75210 Offset snips, RIGHT/STRAIGHT CUT, 102" long, 1d" cut Klenk Copper Cutting Snips • Folding Tools Smooth cut -- leaves no teeth marks! • Hand Seamers +EASIEST CUTTING l Ideal for architectural metals -- copper, brass, zinc, • Duct/Insulation Knives +MOST COMFORTABLE ® • Select-A-Bit™ Drivers Klenk Long Cut Siding Snips and pre-coated metals l Useful in roofing, flashing, and weatherproofing applications • Pocket Socket® l Designed for steel, aluminum, and vinyl, siding -- • Cutters/Strippers these snips have fine points to get in close to
    [Show full text]
  • Mild Steel Pipe & Fittings
    Trade of Plumbing Module 1: Thermal Process and Mild Steel Pipework Unit 6: Mild Steel Pipe Reparation and Jointing Phase 2 Trade of Plumbing – Phase 2 Module 1 Table of Contents List of Figures .................................................................................................................... 4 List of Tables ..................................................................................................................... 5 Document Release History ............................................................................................... 6 Module 1 –Thermal Process and Mild Steel Pipework ................................................. 7 Unit 6 – Mild Steel Pipe - Preparation and Jointing ....................................................... 7 Learning Outcome: ..................................................................................................... 7 Key Learning Points: .................................................................................................. 8 Training Resources: .................................................................................................... 8 Exercise: ...................................................................................................................... 9 Key Learning Points Code: ......................................................................................... 9 Mild Steel Pipe & Fittings .............................................................................................. 10 Mild Steel Pipe Identification ......................................................................................
    [Show full text]
  • Charleston County Park and Recreation Pool Projects
    CHARLESTON COUNTY PARK AND RECREATION POOL PROJECTS: Wannamaker County Park – Whirlin’ Waters RAFT RIDE & PLUNGE POOL North Charleston Wannamaker County Park, Whirlin’ Waters 888 University Blvd. North Charleston, SC 29406 GENERAL CONTRACTOR BID PACKAGE PROJECT MANUAL May 2018 Water Technology, Inc. Project No. 17034 TABLE OF CONTENTS Table of Contents Project Directory DIVISION 00 PROCUREMENT AND CONTRACTING REQUIREMENTS CCPRC CCPRC Invitation for Bid & Contract Documents 00 31 00 Information Available to Bidders 00 31 21 Project Schedule 00 31 32 Geotechnical Data 00 31 33 Existing Conditions and Survey 00 31 34 List of Drawings 00 41 00 Bid Proposal Form 00 41 13 Supplements to Bid Forms 00 65 00 Substitution Request Form CCPRC Contract Document DIVISION 01 GENERAL REQUIREMENTS 01 11 00 Summary of Work 01 20 00 Project Meetings 01 20 60 Allowances & Unit Prices 01 20 70 Application for Payment 01 30 50 Modification Procedures 01 34 00 Shop Drawings, Product Data and Samples 01 40 00 Quality Control 01 40 10 Coordination 01 40 50 Cutting and Patching 01 50 10 Construction Facilities and Temporary Controls 01 50 40 Field Engineering 01 56 39 Tree Protection 01 60 00 Materials and Equipment 01 63 10 Substitutions 01 70 00 Contract Closeout 01 74 00 Warranties DIVISION 02 EXISTING CONDITIONS 02 41 19 Selective Demolition DIVISION 13 SPECIAL CONSTRUCTION 13 11 13 Pool General 13 11 14 Pool Start-Up, Maintenance & Operations Training 13 11 18 Pool Concrete 13 11 20 Pool Pipe and Pipe Fittings 13 11 23 Pool Pipe Supports 13 11 24 Pool Valves 13 11 25 Pool Centrifugal Pumps 13 11 32 Pool Fiberglass Filters 13 11 45 Pool Rail Goods 13 11 46 Pool Equipment 13 11 60 Pool Quartz Aggregate Finish 13 11 61 Pool Ceramic Tile 13 11 65 Water Flume Rides CCPRC Pool Projects Table of Contents Job #17034 May 2018 ©2017 Water Technology, Inc.
    [Show full text]
  • Modular Hi-Rise Replacement Series – MRY INSTALLATION, OPERATION, & MAINTENANCE MANUAL
    Modular Hi-Rise Replacement Series – MRY INSTALLATION, OPERATION, & MAINTENANCE MANUAL ReStoraMOD™ Build Your Reputation on Ours Modular Hi-Rise Replacement Series – MRY INSTALLATION, OPERATION, & MAINTENANCE MANUAL Warnings and Cautions 1. No attempt should be made to handle, install, 11. All field wiring should be done in or service any unit without following safe accordance with governing codes and practices regarding mechanical equipment. ordinances. Any modification of the unit wiring without factory authorization will 2. WARNING: Wear eye, hand and limb void all of the factory warranties and will protection at all times during demolition nullify any agency listings. and installation. 12. The manufacturer assumes no responsibility 3. WARNING: Have appropriate permits and for any damages and/or injuries resulting staffing present for brazing, sheet metal from improper field installation and/or work, wiring, etc. wiring. 4. WARNING: Disconnect electrical service at 13. Proper safety procedures should be breaker panel, and lockout appropriately. Be followed regarding ventilation and safety sure that electrical wires do not make equipment. The manufacturer’s directions contact with any other conductive surfaces. should be followed for the products being used. 5. WARNING: Locate cold and/or hot water isolation valves, and turn-off all supply 14. CAUTION: The air vent provided on the unit water to coil(s). If isolation valves fail to is not intended to replace the main system completely close, it may be necessary to air vents and may not release air trapped depressurize risers below the floor being in other parts of the system. Inspect the renovated; and replace isolation valves entire system for potential air traps and vent before proceeding with re-pressurization those areas as required, independently.
    [Show full text]
  • Central Utility Plant Surge Tank Installation Project
    ROWAN UNIVERSITY CENTRAL UTILITY PLANT SURGE TANK INSTALLATION PROJECT GLASSBORO, NEW JERSEY PREPARED BY: DEDC, LLC. Issued for Bid, Permit, and DCA Review December 11, 2020 WWW.DEDC-ENG.COM PENNSYLVANIA 30 S. /17th Street Suite 830 /Philadelphia, PA 19103 DELAWARE 315 SOUTH CHAPEL STREET / NEWARK, DE 19711 T 302.738.7172 / F 302.738.7175 Rowan University CENTRAL UTILITY PLANT SURGE TANK INSTALLATION Project Manual DEDC Project 19P258 TABLE OF CONTENTS SECTION TITLE 230000 Scope of Work 230519 Meters and Gages for HVAC Piping 230553 Identification for HVAC Piping and Equipment 230719 HVAC Piping Insulation 232213 Steam and Condensate Heating Piping 232214 Steam and Condensate Piping Specialties 260505 BSD-Selective Demolition for Electrical 260519 BSD-Low-Voltage Electrical Power Conductors and Cables 260526 BSD-Grounding and Bonding for Electrical Systems 260529 BSD-Hangers and Supports for Electrical Systems 260533_13 BSD-Conduit for Electrical Systems 260533_16 BSD-Boxes for Electrical Systems 260553 BSD-Identification for Electrical Systems 260583 BSD-Wiring Connections 262726 BSD-Wiring Devices 262816_16 BSD-Enclosed Switches TABLE OF CONTENTS 1 Rowan University CENTRAL UTILITY PLANT SURGE TANK INSTALLATION Project Manual DEDC Project 19P258 SECTION 230000 – SCOPE OF WORK PART 1 - SCOPE OF WORK A. GENERAL 1. Unless specifically indicated in the Rowan University’s (RU) General Conditions as work to be contracted directly by RU, the contractor shall be responsible for all material and labor related to this project. This shall include mechanical piping, plumbing, cutting and patching associated with demolition and installation of mechanical systems. 2. Protect interior finishes from damage while transporting equipment through the building.
    [Show full text]
  • Climate Control. Secondary School Course Guide
    DOCUMENT RESUME ED 129 979 CE 007 774 AUTHOR DuPlantis, Ernest P. TITLE Climate Control. Secondary SchoolCourse Guide. INSTITUTION Rutgers, The State Univ., New Brunswick, N.J. Curriculum Lab. SPONS AGENCY New Jersey State Dept. of Education, Trenton.Div. of Vocational Education. PUB DATE Mar 72 NOTE 243p. EDRS PRICE MF-$0.83 HC-$12.71 Plus Postage. DESCRIPTORS *Air Conditioning; *Climate Control;Course Descriptions; Curriculum Guides; *Learning Activities; *Refrigeration; *RefrigerationMechanics; Secondary Education; Service Occupations;Teaching Guides; Vocational Education ABSTRACT This course guide is oriented toward developing skills in air conditioning and refrigerationinstallation and service. Although primarily designedas a 2-year program for high school students at the junior and senior levels,it is equally acceptable for the post high school studentas an occupational training program, or as a refreshercourse for those who have been in the industry and have not had the opportunityto keep up with recent developments in new methods and equipment. Eightmajor sections are included; The first three (Refrigeration, BasicElectricity, Commercial Refrigeration) are to be used the firstyear of the program, and the remaining five (Year Round Air Conditioning,Air Distribution, Controls, Trouble Shooting,Customer Relations) are to be used the second year. Each section includes from 1to 15 units, with each unit Troviding unit objectives,tools and materials needed, and a unit outline. Occupational informationand a vocabulary listing are included in the introduction for instructor use. (SH) *********************************************************************** Documents acquired by ERIC include many informal unpublished * materials not available from othersources. ERIC makes every effort * * to obtain the best copy available. Nevertheless,items of marginal * -* reproducibility are often encountered and thisaffects the quality * * of the microfiche and hardcopy reproductionsERIC makes available * * via the ERIC Document Reproduction Service(EDRS).
    [Show full text]
  • Download Attachment
    PROJECTTECHNICAL MANUAL SPECIFICATIONS AND SPECIFICATIONS Twin Rivers Unified School District Dry Creek Elementary School Kitchen Remodel Harrington Design Associates Project #. 2021.00 IDENTIFICATION STAMP DIV. OF THE STATE ARCHITECT Owner: APP: 02-118745 INC: Twin Rivers Unified School District REVIEWED FOR 3222 Winona Way, Suite 200 ✔ DDIVISION OF✔SA THE STATE ARCHITECT SS FLS ACS North Highlands, California 95660 DEPARTMENT APPLICATION OF GENERAL SERVICES (916) 566-1600 x50261 DATE:NO. 03/30/202102- Perry Herrera – Director of Maintenance and Facilities 115492 Architect: Harrington Design Associates 5875 Pacific Street, Suite E2 Rocklin, California 95677 (916) 577-5789 Francis J. Harrington, AIA California Registration #C-28875 Mechanical/Plumbing Engineer: LP Consulting Engineers, Inc. 1209 Pleasant Grove Blvd. Roseville, California 95678 (916) 771-0778 Sean Pourvakil California Registration #M32311 Electrical Engineer: LP Consulting Engineers, Inc. 1209 Pleasant Grove Blvd. Roseville, California 95678 (916) 771-0778 Alex Saev California Registration #E18211 Harrington Design Associates Twin Rivers Unified School District A/E Project Number 2021.00 Dry Creek ES Kitchen Remodel TABLE OF CONTENTS Technical Requirements DIVISION SECTION TITLE DIVISION 02 EXISTING CONDITIONS 02 41 00 Site Demolition DIVISION 03 CONCRETE 03 20 00 Concrete Reinforcing 03 30 00 Cast-In-Place Concrete DIVISION 05 METALS 05 50 00 Metal Fabrications DIVISION 06 WOODS, PLASTICS, AND COMPOSITES 06 10 00 Rough Carpentry 06 64 05 Fiberglass-Reinforced Plastic
    [Show full text]
  • Specifications
    Venice Campus Central Energy Plant Improvements Specifications November 2, 2017 Engineering Matrix, Inc. 2860 Scherer Drive, Suite 640 St. Petersburg, Florida 33716 (727) 573-4656 * www.engmtx.com © Engineering Matrix, Inc. Matrix No. 16-0700.4 STATE COLLEGE OF FLORIDA VENICE CAMPUS—CENTRAL ENERGY PLANT IMPROVEMENTS MATRIX PROJ. #16-0700.4 MECHANICAL INDEX 15010..............BASIC MECHANICAL REQUIREMENTS 15140..............SUPPORTS AND ANCHORS 15170..............MOTORS 15190..............MECHANICAL IDENTIFICATION 15242..............VIBRATION ISOLATION 15260..............PIPING INSULATION 15280..............EQUIPMENT INSULATION 15400..............TESTING OF PIPING SYSTEMS 15410..............PLUMBING PIPING 15430..............PLUMBING SPECIALTIES 15510..............HYDRONIC PIPING 15515..............HYDRONIC SPECIALTIES 15540..............HVAC PUMPS 15545..............CHEMICAL (WATER) TREATMENT 15684..............CENTRIFUGAL WATER CHILLER 15920..............VARIABLE FREQUENCY DRIVE 15975..............BUILDING MANAGEMENT AND AUTOMATIC TEMPERATURE CONTROL SYSTEM 15990..............TESTING, ADJUSTING, AND BALANCING © ENGINEERING MATRIX, INC. STATE COLLEGE OF FLORIDA VENICE CAMPUS—CENTRAL ENERGY PLANT IMPROVEMENTS MATRIX PROJ. #16-0700.4 ADVANCE PURCHASE SPECIFICATIONS 15000-AP .......NOTES TO BIDDERS (ADVANCED PURCHASE CHILLER EQUIPMENT) 15684-AP .......CENTRIFUGAL WATER CHILLER (ADVANCED PURCHASE) © ENGINEERING MATRIX, INC. STATE COLLEGE OF FLORIDA VENICE CAMPUS—CENTRAL ENERGY PLANT IMPROVEMENTS MATRIX PROJ. #16-0700.4 SECTION 15010 BASIC
    [Show full text]
  • Welcome to ROTHENBERGER!
    2016 / 2017 www.rothenberger.com O NE 6.000of Premium tools for professionals! R 600 Almost real “Classics”: Our R-system pipe cleaning machines R 550, R 600, R 650 and R 750 can remove even the most persistent blockages – all over the world. Our customers can always count on receiving the highest quality products which have earned the right to carry the ROTHENBERGER name. Obviously “Made in Germany”! 2 Transparency, Efficiency and Competence. Communication, production and technical know-how are united in the ROTHENBERGER TEC Center. The architecture, which is a perfect symbiosis of functionality and aesthetics, is perfectly suited for perfor- ming a wide variety of tasks. Furthermore, the TEC Center is a place of inspiration for our visitors with a representative showroom, the training rooms and a highly praised gastronomy. Welcome! Welcome to ROTHENBERGER! We contribute to the supply of water and energy However, it is not just a matter of quantity: More than for people all over the world. With more than 6,000 200 patents and trademarks, as well as a high in-house products we offer the largest product portfolio in production quota are evidence of the high standard the industry – and can therefore offer comfortable and quality of our products. It is our objective to sup- “one-stop shopping” for our partners in craft, trade port and simplify the everyday professional work of and industry. More than 1,700 colleagues in 50 our customers in order to make it possible for them to subsidiaries and 17 production sites worldwide deve- deliver the best results in the shortest period of time.
    [Show full text]