November 2011 Klenk® Aviation Klenk® Aviation Snips Klenk® Aviation Snips November 2011 Klenk® Aviation Snips Klenk® Offset Aviation Snips Klenk® Bulldog Snips Unique flat design makes this the l +Superior Materials, Perfect for T-bar in drop ceilings and extruded easiest turning snip available. aluminum frames +Individual Craftsmanship, and l Cuts heavier gauge metal l New shorter handles with softer grip on upper handle l Ideal for 'S' slips + gives you ergonomic comfort, reducing hand fatigue. A Unique Series of Quality Checks and drives l Precision-ground tips meet together evenly to HVACR and Keep KLENKS long prevent fishhooks, burrs, and tears at end HVACR and Metal Roofing after other snips give out! of each cut. Metal Roofing

Tools MODEL # DESCRIPTION MODEL # DESCRIPTION CUT • Klenk® Aviation Snips MA74500 Bulldog Snips, 9" long, :" cut • Crimpers Our Pledge: MA75200 Offset snips, LEFT/STRAIGHT CUT, 102" long, 1d" cut • • Fairmont Tongs ® +DURABILITY MA75210 Offset snips, RIGHT/STRAIGHT CUT, 102" long, 1d" cut Klenk Copper Cutting Snips • Folding Tools Smooth cut -- leaves no teeth marks! • Hand Seamers +EASIEST CUTTING l Ideal for architectural metals -- copper, brass, zinc, • Duct/Insulation +MOST COMFORTABLE ® • Select-A-Bit™ Drivers Klenk Long Cut Siding Snips and pre-coated metals l Useful in roofing, flashing, and weatherproofing applications • Pocket Socket® l Designed for steel, aluminum, and vinyl, siding -- • Cutters/Strippers these snips have fine points to get in close to siding • Magnetic Pickup Tools 10-1/2’’ models now with Built-in Wire Cutter! locks and rolled • Flashlights/Work Lights edges! l Unique flat blade • Stak-N-Tote® Trays MODEL # DESCRIPTION CUT • Utility Knives design makes this the easiest • Hammers MA70560 10½" aviation snips, built-in wire cutter, 1½" left/straight cut turning snip • Pry-Angle™ Pry Bars available! • Wrenches MA70570 10½" aviation snips, built-in wire cutter, 1½" right/straight cut • Pliers Available Through Distributors MA70580 10½" aviation snips, built-in wire cutter, 1½" straight cut/slight curves MODEL # DESCRIPTION MODEL # DESCRIPTION CUT Call Toll-free Available Through Distributors 9½" Klenk Aviation Snips, 1¼" left/straight cut 1-800-327-5619 MA70030 MA72000 Large "LONG CUT" Siding Snip, straight cut - 13" long, 2¼" cut MA74520 10½" copper-cutting snips, 1½" left and straight cut, red grip Call Toll-free for your nearest 1-800-327-5619 Klenk Distributor or visit MA70040 9½" Klenk Aviation Snips, 1¼" right/straight cut MA72010 Small Siding Snip, straight cut - 10½" long, 1½" cut MA74530 10½" copper-cutting snips, 1½" right and straight cut, green grip for your nearest www.KlenkTools.com Klenk Distributor or visit MA70050 9½" Klenk Aviation Snips, 1¼" straight cut­­ and slight curves MM20200 Sheath - Length: 12½'', 4½'' wide opening MA74510 10½" copper-cutting snips, 1½" straight cut/slight curves, yellow grip 79-183 www.KlenkTools.com

HVACR Specialty Tools Hand Seamers / Bending Tools HVACR Specialty Tools Knives Klenk® Crimpers Fairmont Tongs Hand Seamers Dual Duct/Insulation Knives l l l l Reduce diameter of round duct, pipe, Better Bending! Better Forming! Better Seaming! Compound-leverage hand seamers 6" blade is serrated or downspouts -- works on metal up to 20 gauge most essential in HVACR and sheet metal trades! on one side and smooth on the make the task easy -- three other different models­­­! l Available with original rosewood handle or with ergonomic rubber molded MODEL # DESCRIPTION handle MA74100 Hand seamers, straight - Jaw Width: 3¼" MA74110 Hand seamers, offset - Jaw Width: 3¼" MODEL # DESCRIPTION MA74120 Hand seamers, straight - Jaw Width: 6" DA71000 Duct , rosewood handle, with sheath MODEL # DESCRIPTION MODEL # DESCRIPTION DA71010 Duct knife, ergonomic rubber handle, with sheath ® MA71250 Five-blade Straight Crimper - Length: 9:", Crimp: 1e" MT14000 Fairmont Tongs, Straight, 9½" long, 3" x 1c" jaw Klenk Notcher MA71260 Five-blade Offset Crimper - Length: 9:", Crimp: 1e" l Drop-forged jaw MT14010 Fairmont Tongs, Offset, 9½" long, 3" x 1c" jaw Duct Board Knives l Notches cleanly without slipping up to 22 MT14020 Fairmont Tongs, Straight w/cushion grips, 9½" long, 3" x 1c" jaw gauge CR l Heavy gauge , made from high carbon steel, are hardened, ground, MT14030 Fairmont Tongs, Offset w/cushion grips, 9½" long, 3" x 1c" jaw l Compound leverage handles with black ® vinyl grips and honed to a sharp edge Klenk Double-cut l Available in 4" and 6" lengths l Proper tool to cut pipe and downspout perfectly -- l Available with or without allows room for the tool to travel -- no bending up! Folding Tools MODEL # DESCRIPTION safety guard, which helps to l Lightweight aluminum is half the weight of other prevent accidents MA77000 Notcher - Length: 8½", Notch: :" folding tools! and serves as a l One-piece aluminium tool has no spot- finger stop when welds to break! cutting with l Ergonomic finger ridges ensure the best Snap Lock Punch increased Safety grip, easy placement, and consistent folds! l Drop-forged jaw pressure. Guard l All models fold 3/8" and 1" depths in 24 gauge l Compound leverage handles with black sheet metal. vinyl grips MODEL # DESCRIPTION MODEL # DESCRIPTION DR68020 Ductboard Knife w/guard, 4'' long x 1'' wide MA77500 12" Lightweight Aluminum Folding Tool - only 10 oz! DR68070 Ductboard Knife w/guard, 6'' long x 1'' wide MODEL # DESCRIPTION MA77510 18" Lightweight Aluminum Folding Tool - only 15 oz! MODEL # DESCRIPTION DR68010 Ductboard Knife w/o guard, 4'' long x 1'' wide MA71500 Pipecutter, Slot/Double Cut - Length: 10½", Cut Length: 1¼" MA77520 24" Lightweight Aluminum Folding Tool - only 20 oz! MA77010 Snap-lock Punch - Length: 8", Jaw Depth: ¼" DR68060 Ductboard Knife w/o guard, 6'' long x 1'' wide