DOCSLIB.ORG

2018 Price List

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2018 Price List 2018 PRICE LIST 2018 PRICE LIST c/Urola Nº 10. 20230 Legazpi. Guipúzcoa. Spain Tel.: +34 943 73 90 00 Fax: +34 943 73 15 01 [email protected] [email protected] www.bellota.com BUILDING FORMWORK Shovels • Made with special Bellota steel. • 3+ steel treatment for a longer tool life: doesn’t break, warp or wear away. • Very strong, riveted holder ensuring the perfect joint between blade and handle. • Varnished beech handle, light, pleasant touch wooden handles. PEFC certificated. Available in T-shaped (MM), D (MA) and long sizes (ML). • Epoxy coating to prevent rust on tool. Uses: • For digging and collecting rubble, cement, soil, etc. D Handle Square Shovel 5502 Long Handle Square Shovel 5502 REF. £ g A mm B mm C mm REF. £ g A mm B mm C mm 5502-2 MA 17,06 501209 6 2.100 1.020 320 250 5502-2 ML 21,12 501254 6 2.110 1.490 320 250 5502-3 MA 16,66 501407 6 2.235 1.030 335 265 BUILDING RESISTANT 5502-4 MA 18,67 501605 6 2.345 1.035 340 275 5502-6 MA 20,15 501803 6 2.565 1.070 370 305 A B C Pointed Shovel 5550 Pointed Shovel 5551 REF. £ g A mm B mm C mm REF. £ g A mm B mm C mm 5550-27 SM 9,73 606829 6 1.050 270 270 5551 SM 8,22 501810 20 860 290 295 5550-29 SM 10,26 537536 240 1.170 290 290 5550-31 SM 10,36 526547 240 1.660 310 310 T Handle Pointed Shovel 5501 D Handle Pointed Shovel 5501 REF. £ g A mm B mm C mm REF. £ g A mm B mm C mm 5501-2 MM 17,98 500103 6 1.800 1.020 325 265 5501-2 MA 21,53 500202 6 1.975 1.030 325 265 5501-3 MM 17,56 500400 6 1.915 1.030 335 290 5501-3 MA 19,90 500509 6 2.085 1.040 335 290 5501-4 MM 20,15 500608 6 2.020 1.035 345 300 5501-4 MA 23,77 500707 6 2.195 1.045 345 300 Pointed Shovel 5552 Rounded Shovel 5556 REF. £ g A mm B mm C mm REF. £ g B mm C mm M 5552-26 SM 9,00 501544 25 850 270 260 5556-2 SM 8,87 779790 25 910 270 255 M 5556-2 R SB M 5556-2 C SB Long Handle Pointed Shovel 5501 T Handle Square Shovel 5502 REF. £ g A mm B mm C mm REF. £ g A mm B mm C mm 5501-2 ML 22,80 500301 6 1.970 1.490 325 265 5502-2 MM 17,07 501100 6 1.930 1.015 320 250 5502-3 MM 16,66 501308 6 2.060 1.030 335 265 Pointed Shovel 5557 Reinforced Scraper 5710 5502-4 MM 18,66 501506 6 2.170 1.030 340 275 REF. £ g A mm B mm C mm REF. £ g A mm B mm M 5502-6 MM 20,15 501704 6 2.735 1.070 370 305 5557-23 SM 8,57 598926 25 990 300 220 5710 13,82 638950 6 1.025 300 290 M5701L/M5701L 120 90 91 FORMWORK FORMWORK Wrecking bar and bending wrench Picks, scrapers and rakes • Made with special Bellota steel. • Made with special Bellota steel. • Forged in one single piece, unbreakable. • 3+ steel treatment for a longer tool life: doesn’t break, warp or wear away. • 3+ steel treatment for a longer tool life: doesn’t break, warp or wear away. • Heat treated heads and claws for greater resistance. • Epoxy coating to prevent rust on tool. • Claw special design for minimum effort. • Water-based paint to prevent oxidation of tools. Uses: • Pick: for opening trenches and digging stones. Uses: • Scrapers and rakes: for moving and spreading cement, concrete, sand, stones, etc. • Wrecking bar: For levering and removing the form supports. • Bending wrench: For bending ironworking during the shuttering process. BUILDING B A A HAYA / PERFECT QUALITY BEECH JOINT Pick 5001 Pick with Handle 5001 REF. £ g A mm B mm M REF. £ g A mm B mm M 5001-A 19,40 120004 6 2.050 450 45 M 6 5001-A CM 27,27 142792 2 2.775 450 45 M 6 5001-B 18,92 120103 6 2.500 480 52 M 6 5001-B CM 27,36 638974 2 3.225 480 52 M 6 Wrecking Bar 5982 Bending Wrench 5985 5001-C 21,85 120202 6 3.000 520 55 M 7 REF. £ g A mm REF. £ g A mm 5001-D 25,31 120301 6 3.500 570 58 M 7 5982-18x500 12,85 157000 6 1.200 500 5985-8 11,80 157901 6 400 380 Beech wood. Perfect join with weidge. 5982-20x600 14,71 156997 6 1.800 600 5985-10 13,01 157079 6 680 460 5982-20x700 16,50 156980 6 2.025 700 5985-12 14,86 157062 6 825 500 5982-22x800 19,68 156973 6 2.850 800 5985-14 17,95 157055 6 1.300 600 5982-22x1000 24,32 156966 6 3.400 1.000 5985-16 22,55 157048 6 1.850 700 5982-22x1200 26,41 433098 4 4.000 1.200 5985-18 26,90 157031 6 2.400 850 5985-20 33,84 157024 6 3.400 1.000 5985-22 43,94 157017 4 4.300 1.100 Pick with Carbon Fiber Handle 5001 Pick 5016 REF. £ g A mm B mm M REF. £ g A mm B mm M 5001-A CF 41,41 638998 2 3.100 450 45 M 6 5016-00 19,55 182651 6 1.500 450 50 M 5016-00 5001-B CF 41,49 639018 2 3.550 480 52 M 6 Pick with Handle 5016 Curved Shoulder Scraper 5701 REF. £ g A mm B mm M REF. £ g A mm B mm M 5016-00 CM 27,96 225167 10 2.430 450 50 M 5016-00 5701-0 22,13 126402 6 1.100 160 260 M 5701 L SB M 5701 L 120 SB 5701-B 26,39 126600 6 1.400 170 300 M 5701 L SB M 5701 L 120 SB A Curved Shoulder Scraper 5702 B Square Shoulder Scraper 5709 REF. £ g A mm B mm M REF. £ g A mm B mm M 5702-A 17,08 126907 6 1.275 160 260 M 4 5709 29,94 127003 6 1.200 140 310 M 5701 L SB M 5701 L 120 SB 92 93 FORMWORK / PICKS, SCRAPERS AND RAKES FORMWORK Bolt cutters • Forged in one single piece, unbreakable. • 3+ steel treatment for a longer tool life: doesn’t break, warp or wear away. • Anti-slip elastomer grips to prevent slippage when being used. • Epoxy coating to prevent rust on tool. Uses: 5 Flat Prong Rake 5751 5 Prong Rake 5753 • For cutting steel rods. REF. £ g A mm B mm M REF. £ g A mm B mm M 5751 23,38 127102 6 1.600 160 235 M 4 5753-B 20,98 127409 6 1.350 155 195 M 4 BUILDING 6 Prong Rake 5754 Cartridge Belt 51308 REF. £ g A mm B mm M REF. £ g A mm B mm 5754 24,28 127508 6 1.500 150 220 M 4 51308 28,70 162271 2 680 250 200 Made in leahter with heavy duty rivets. Long life and maximum resistance. B Four pockets and hammer holder. A Bolt Cutter 6009 Bolt Cutter Head 6009 REF. £ g A mm B mm REF. £ g A mm B mm FORMWORK 6009-450 82,81 159011 1 1.540 472 70 C 6009-450 46,98 158960 3 670 70 128 6009-600 94,20 159028 1 2.590 627 85 C 6009-600 64,26 158977 3 1.000 85 148 6009-750 122,63 159035 1 3.880 779 97 C 6009-750 76,17 158984 1 1.500 97 168 Nippers 6009-900 155,98 159042 1 6.110 929 110 C 6009-900 90,69 158991 1 2.000 110 188 6009-1050 202,86 159059 1 8.900 1.070 125 C 6009-1050 125,11 159004 1 3.000 125 209 • Made with special Bellota steel. • Forged in one single piece, unbreakable. • 3+ steel treatment for a longer tool life: doesn’t break, warp or wear away. • Perfect edge alignment for clean cutting. • Epoxy coating to prevent rust on tool. Uses: • For formwork or carpentry work. Bolt Cutter Handle Screw 6009 Bolt Cutter Head Screw 6009 REF. £ g REF. £ g T 6009-450 M 4,44 179569 1 20 T 6009-450 C 4,44 179477 1 20 T 6009-600 M 4,44 179576 1 20 T 6009-600 C 4,44 179484 1 20 T 6009-750 M 4,44 179606 1 20 T 6009-750 C 4,44 179514 1 20 T 6009-900 M 4,44 179620 1 20 T 6009-900 C 4,44 179521 1 20 T 6009-1050 M 4,44 179637 1 25 T 6009-1050 C 4,44 179538 1 25 A Length 450 mm 600 mm 750 mm 900 mm 1.050 mm Material to be cut B 19” 24” 30” 36” 24” Ø Ø Ø Ø Ø Soft wire 50 kgs/mm2 8 mm 10 mm 13 mm 16 mm 19 mm Ø Ø Ø Ø Ø 2 Concreter’s Nipper 6001 Carpenter’s Nipper 6005 Hard wire 133 kgs/mm HRC-41 6 mm 8 mm 9 mm 10 mm 11 mm REF.
Load more

Recommended publications
  • IDENTIFICATION and GENOTYPING Tail Snip, Ear Punch, and Toe Clip
    DEPARTMENT OF VETERANS AFFAIRS Research Service Policy Memorandum 19-55 South Texas Veterans Health Care System San Antonio, Texas 78229 March 11, 2019 IDENTIFICATION AND GENOTYPING Tail Snip, Ear Punch, and Toe Clip 1. PURPOSE: Proper identification of research animals is an essential component of research design. It allows for easy tracking of animal throughout a research project and assists animal care staff in providing appropriate care to individual animals. 2. POLICY: a. Procedures described within this standard operating procedure provide guidance on the various methods of identifying and genotyping individual or groups of mice and rats on VA IACUC-approved research protocols. 3. PROCEDURES: a. CAGE CARDS - Cage card information includes: species, strain or stock, source of animal, gender, names and contact numbers of responsible investigators, date of birth/arrival and protocol number. Cage card can be used as the only method of identification for animals on protocols where individual identification is not necessary. b. TEMPORARY MARKINGS - Use an indelible marker to write numbers, bars, or other distinguishable markings on the tail or the ears. Temporary marking can be used for short-term individual identification; this marking may last up to 3-4 days. c. EAR TAGS - Mice should be ear tagged at weaning age or older. Use tags that are about 5 mm long for mice. Rinse tag in 70% alcohol before use to help prevent ear infection. Position the tag in the applicator so that the end with the hole is positioned over the notched area of the applier; the pointed end should be opposite the hole.
    [Show full text]
  • Snips, Shears, Scissors & Snip
    SNIPS, SHEARS, SCISSORS & SNIP ACCESSORIES Metalmaster® Compound Action Snips The non-slip serrated jaws of Wiss Metalmaster snips are made of tough, wear-resistant molybdenum steel to provide the durability demanded by the compound lever action and to withstand the severe strain of cutting heavy stock or tight curves. The handles are formed of special high strength steel and have a margin of strength far above the amount of hand pressure that can be applied. Overall Length Recommended max. Length of cut capacity low carbon Shelf Pack Wt. Shelf Item# Description inches inches cold rolled steel lb. Pack 820001 M-1R - cuts left from tight 9-3/4 1-3/8 18 Gage Steel - 5.25 6 curves to straight-red grips 0.049" 820004 M-2R - cuts right from tight 9-3/4 1-3/8 18 Gage Steel - 5.25 6 curves to straight-red grips 0.049" 820007 M-3R - cuts straight (or 9-3/4 1-1/2 18 Gage Steel - 5.25 6 wide curves left or right in 0.049" light stock). Accomplishes most metal cutting require- ments of the home crafts- man. - yellow grips Metalmaster® Special Series Snips Metalmaster special series snips utilize a hardening process designed for unusual industrial requirements such as cutting today’s space age metals, like inconel, stainless steel and titanium. Overall Length Recommended max. Length of cut capacity low carbon Shelf Pack Wt. Shelf Item# Description inches inches cold rolled steel lb. Pack 820014 M1R-S1 - Cuts left - 9-3/4 1-3/8 18 Gage Steel - 84 6 Blue Grips 0.049" 820015 M2R-S1 - Cuts right - 9-3/4 1-3/8 18 Gage Steel - 84 6 Blue Grips 0.049" Metalmaster® Compound Action Bulldog Snips This snip is designed for notching or trimming extra heavy stock.
    [Show full text]
  • Compound Action and Tinner's Snips Scissors and Shears Utility Knives
    I Compound Action and Tinner’s Snips I Scissors and Shears I Utility Knives Wiss® products have been earning their reputation for craftsmanship and long life since 1848. One result: Wiss has been the market leading “call-out brand” for compound action snips for over 50 years. The wide product line now includes scissors, industrial shears, utility knives, siding and HVAC tools… all with famous Wiss quality built in. www.cooperhandtools.com/wiss Wiss® Table of Contents Contents Page No. Snips introduction 251 Metalmaster® compound action snips 252 - 255 Metal-Wizz® compound action snips 254 All-purpose cutter 255 Repair parts for snips 255 Solid steel tinners’ snips 256 - 257 Heating, ventilating and air conditioning tools (HVAC) 258 - 259 Siding tools 260 - 261 Utility knives 262 - 264 Snap knives 263 Replacement utility knife blades 263 - 264 Shears and scissors introduction 264 Stainless steel scissors and shears 264 - 266 Industrial shears 266 - 268 Inlaid® shears and trimmers 266 - 269 Belt and leather cutting scissors 269 Solid steel trimmers 270 Double rounded scissors and shears 271 Kitchen shears 271 Pinking shears 271 - 272 Electrician’s scissors 272 - 273 Quick-Clip® lightweight speed cutters 273 Sewing and embroidery scissors 274 Special purpose Industrial snips and shears 274 - 277 Ratcheting Pipe Cutters 277 s s Wiss Numerical Index 278 i W Key to symbol Length of Cut 250 www.cooperhandtools.com/wiss COMPOUND ACTION SNIPS Metalmaster® Compound Action Snips The Wiss® line of Metalmaster® compound action snips is the most complete line on the market. Metalmaster® snips are advanced metal cutting tools originally developed for cutting extremely tough alloys used in the aircraft industry.
    [Show full text]
  • Stabile Research Building Training Presentation
    Tail Snips, Tattoos and Identification Procedures - Training Presentation University of South Florida (July 2005) Course Objectives This presentation will outline common methods used to obtain tissues for DNA/RNA sampling, as well as prevalent identification methods. Tissues commonly used for assessment of DNA and RNA in mice are the tail and ear. Simple identification methods include ear punching, ear notching, placement of ear tags, and tattooing of the tail or foot pad. (NOTE: Any tissue collection over the age of 21 days and/or over 5cm requires anesthesia; use of local anesthetic agents is suggested for animals under 21 days of age). Ear Punches/Notches In order to establish which is the right or left of the animal - position it so that the belly is down and the head is facing away from the you. Restrain, as appropriate, to facilitate performing the punch or notch. Ear Punches/Notches A single hole or notch may be made using an ear punch tool. Notches are accomplished by positioning the instrument at the edge of the ear, resulting in a hole that is only partially surrounded by tissue. Notches may also be made by removing a small wedge shaped piece(s) of tissue with small scissors Ear Punches Tissues removed during this process are generally ample Ear Notches enough to allow for genetic testing, especially when PCR is utilized. Sterile instruments and tubes are used to obtain and manipulate the tissue after collection, and should be sterilized between animals. Multiple punches may be made to collect enough tissue for analysis – each punch is approximately 0.5mm in diameter.
    [Show full text]
  • Snips, Scissors, HVAC-Tools and Cutting Tools Wiss® Table of Contents
    Snips, Scissors, HVAC-Tools and Cutting Tools Wiss® Table of Contents Contents Page No. Metalmaster Compound Action Snips 165 - 171 HVAC Tools 171 - 174 Foldings Tools 175 Scissors & Shears 176 - 178 Thread Clips 179 Knifes 180 Pipe Cutters 181 Wiss® Numerical Index 194 Key to Symbol Length of Cut 164 snips Metalmaster Compound Action Snips The Wiss line of Metalmaster compound action snips is the most complete line on the market. Metalmaster snips are one of the most advanced metal cutting tools available today. Originally developed for cutting the extremely tough alloys used in the aircraft industry, (hence the nickname Aviation snips), Metalmaster snips have become the favorite of most craftsman who work with metal. Wiss® Metalmaster snips are widely used by home craftsman and professional metal workers in gutter and flashing work, fabrication of heating and cooling ducts and for aluminum siding installation. Wiss® Metalmaster snips are indispensable to homeowners and maintenance specialists and to industrial workers in the appliance, aircraft, automotive, electrical, and construction industries. It is the versatility of Wiss® Metalmaster snips, in addition to their superior cutting qualities, that has made them so popular. Wiss® Metalmaster snips cut with half the effort required of conventional snips and handle even the biggest jobs. They cut acute angles, complex patterns and perfect circles of even small diameter in galvenized steel up to 18 gauge (0,049“ / 1,22 mm). The M5R is recommended for 16 gauge (0,065“ / 1,65 mm). The jaws of Wiss® Metalmaster snips are made of extra tough and wear-resistant special molybdenum steel to provide the extra service demanded by the compound lever action and to withstand the severe strain of cutting heavy stock or tight curves.
    [Show full text]
  • Shears, Scissors, Tinner Snips, Razors
    CATALOG No. 51-25 Copyright, 1925 ]. Wiss & Sons Co. J. Wiss & Sons Co. M A N U F A C T U R E R S SHEARS SCISSORS TINNERS' SNIPS - ORANGE CLIPPERS PRUNING SHEARS 2STA BLlSH ED I H..Jil FACTORIES OF J. WISS & 80NS CO. C'O~TAI~ OVER 120,000 SQUA:RE FEET OF FLOOR SPACE 1848 a dog-power treadmill was used Quality Will Tell In 1848 Jacob Wiss, a Swiss instrument maker, opened a modest shop in Bank Street, Newark, N.J. He began to forge out instruments and a few pair of shears-a trade he had learned thoroughly in t:urope. He worked slowly and with infinite care, and presently people began to say Wiss Shears were the best they had ever used. There was good reason for this approbation, for Wiss Shears were so well made that, after more than 50 years of service, some of the first pairs ever produced are still in existence. Slowly the Wiss enterprise grew; and in 1887 a small part of the present factory was built. It was devoted exclusively to the manufacture of fine shears and scissors, and it soon was crowded to capacity. To-day the factories of J. Wiss & Sons Company are the largest of their kind in the world-and the reason for their prodigious growth is a firm adher­ ence to the old policy of Jacob Wiss to produce nothing but goods of the highest quality. 5 Showing the WISS Shear Blade in various stages of development Wiss F orging Depa rtment where t he frames of Wiss Sliears are forged under powerful drop-hammers How Wiss Shears Are Made 0 the average man or woman one shear is very much like another.
    [Show full text]
  • Thread Snips! Text and Photos by Cindy Scraba
    column Cinderella’s Thread Snips! Text and photos by Cindy Scraba ho knew a pair of snips could become Wa quilter’s best friend when cutting threads? Whether you’re snipping threads from embroidery stitching, trimming during appliqué, power piecing or cleaning up a quilt top, a quick snip action is sew easy and safe! Let’s compare three brands and their most popular models by Famoré Cutlery™, Karen Kay Buckley™ and Gingher™. Depending on their intended purposes, consider the overall size (from teeny to medium), type of point (from fine to broad), spring action snip model (versus scissor type) and type of blade (whether it is ser- rated or not/grade of steel.) There are basic ™ ™ ™ benefits to be realized as well. L to R Models: Famoré 2.5" mini-curved scissors, Karen Kay Buckley curved serrated red scissors, Famoré 4.5" curved serrated EZ Snips™, Famoré™ 4" micro tip curved scissors, Famoré™ 4" fine point curved scissors A simple SNIP minimizes repetitive motion to finger joints. Visualize snipping threads on a newly completed quilt top. It could take an hour or more depending on the piecing method and overall size. The SPRING ACTION mecha- nism on a pair of snips allows you to float along the top—like a barber clipping hair left- or right-handed! The blade type is tailored for function. A MICRO SERRATED BLADE makes a huge difference for precision snipping. If you Famoré™ 4.5" EZ Snips™ with “hook” feature for picking out threads and snipping as well; although not a already have a pair of serrated scissors for serrated blade on this model.
    [Show full text]
  • HVACR and Metal Roofing Tools
    November 2011 Klenk® Aviation Snips Klenk® Aviation Snips Klenk® Aviation Snips November 2011 Klenk® Aviation Snips Klenk® Offset Aviation Snips Klenk® Bulldog Snips Unique flat blade design makes this the l +Superior Materials, Perfect for T-bar in drop ceilings and extruded easiest turning snip available. aluminum frames +Individual Craftsmanship, and l Cuts heavier gauge metal l New shorter handles with softer grip on upper handle l Ideal for 'S' slips + gives you ergonomic comfort, reducing hand fatigue. A Unique Series of Quality Checks and drives l Precision-ground tips meet together evenly to HVACR and Keep KLENKS cutting long prevent fishhooks, burrs, and tears at end HVACR and Metal Roofing after other snips give out! of each cut. Metal Roofing Tools MODEL # DESCRIPTION Tools MODEL # DESCRIPTION CUT • Klenk® Aviation Snips MA74500 Bulldog Snips, 9" long, :" cut • Crimpers Our Pledge: MA75200 Offset snips, LEFT/STRAIGHT CUT, 102" long, 1d" cut • Pipecutters • Fairmont Tongs ® +DURABILITY MA75210 Offset snips, RIGHT/STRAIGHT CUT, 102" long, 1d" cut Klenk Copper Cutting Snips • Folding Tools Smooth cut -- leaves no teeth marks! • Hand Seamers +EASIEST CUTTING l Ideal for architectural metals -- copper, brass, zinc, • Duct/Insulation Knives +MOST COMFORTABLE ® • Select-A-Bit™ Drivers Klenk Long Cut Siding Snips and pre-coated metals l Useful in roofing, flashing, and weatherproofing applications • Pocket Socket® l Designed for steel, aluminum, and vinyl, siding -- • Cutters/Strippers these snips have fine points to get in close to
    [Show full text]
  • A H R E X P O S H O W R E P O
    AHR Expo show report APRIL 2010 VOL. 79 • NO. 4 www.snipsmag.com A magazine for sheet metal, heating, cooling and ventilation contractors 001_SNIPS0410.indd 1 3/12/10 2:56:22 PM the BrandYou NamesKnow The Parentnow Company meet The 100+ employees of Lockformer®, Iowa Precision® and Engel® want to thank our loyal customers for sticking with us throughout the first decade of the 21st century. Participating recently in the AHR show in Orlando, we were reminded of how the duct shops from around the world have supported and continue to support us as we produce and continue to perfect the workhorse tools of the industry from “Pittsburgh” and “TDC®/TDF®” roll formers to Vulcan® cutting machines to our 12 productive choices for duct automation to our family of Cornermatic and Whisper-loc® automated corner inserters and duct seam closers. If imitation is the sincerest form of flattery, the many competitive versions of these industry changing machines at the recent AHR show – many the work of our alumni – engendered thoughts of humility and gratitude. We work in a great and competitive industry where our talented employees help duct shops *patent pending and sheet metal workers build great products and strong businesses. We know that all of you have choices when you decide to invest in duct shop equipment. We promise you that Mestek Machinery will not take your business for granted. Every day we strive to help you be more productive. To serve you better, we support a team of over 25 domestic dealers,12 sales people, 13 service people, 8 engineers, and more than 50 manufacturing people.
    [Show full text]
  • Projected Tool List
    The Vancouver Tool Library - Projected Tool List Tool Category Tool Tool Category Tool Awl Brick and Jointing Tools Chalk line Bull Float draw knife bull float handles, 6 ft flatbar cement finishing tools hammers (various) darby trowels, edgers, groovers, level (various) cement mixer, electric mallet, rubber cement mixing box miter box chisels: brick, cold, bull point nail puller concrete tamper (jitterbug) Concrete and Masonry nail set sledge hammer planes, various saw, tile (wetsaw) plum bob Grinder plybars, various Grout Float, various rasp, wood mortar hoe router table mortar mixing box router rebar cutter / bender Carpentry and saw, hand crosscut rotary hammer Woodworking saw horses x2 rotary hammer bits speed square pipe clamps, 2'-8' screwdriver set spring clamps squares, various c-clamps, various Clamps stud finder hand-screw tape measure, various vice-grips utility knife corner-clamps wood chisels, various Box cable cutter Screw gun circuit tester Electricians drill extension cords, <50' angle grinder, Electrical extension cords, >50' random orbital sander soldering iron saw, circular (skilsaw) wire stripper saw, power miter (chop) Multimeter saw, reciprocating (sawzall) saw, saber (jigsaw) saw, table The Vancouver Tool Library - Projected Tool List Caulking gun Bow saw drywall mud knives, various digging bar, various drywall corner knife posthole digger drywall hand sander garden trowel drywall pole sander hedgeshear, manual drywall T-square hedgetrimmer, electric Floor and Wall floor and roof scraper hoe, planters heat gun
    [Show full text]
  • IACUC Policy 16: Tail Snipping and Tail Biopsy of Rodents
    Institutional Animal Care and Use Committee IACUC Policy 16: Tail Snipping and Tail Biopsy of Rodents 1. Background The purpose of a tail snip is to obtain a small amount of tissue and/or blood from a rodent to prepare DNA for genotyping or other analysis. The technique involves the removal of the fleshy tail tip, thus avoiding the bony vertebral segments. A tail biopsy, which is a more invasive procedure, involves the amputation of the tail between bony vertebral segments. Both procedures usually lead to bleeding at the site. A tail snip is easily performed on mice ≤21 days. When ≤2mm length of tissue is collected from these young mice, the procedure does not cause the animal undue pain or distress because the vertebra in the distal tail tip are not yet calcified1, 2. By analogy, this procedure is similar to human ear piercing, which does not require the use of anesthetics nor analgesics. When a similar procedure is performed on older mice (>21 days), or when >2mm length tissue is collected, this constitutes a tail biopsy because the tissue removed will likely contain calcified vertebrae1, 2. A tail biopsy is considered to be a painful procedure and requires the use of anesthetics and analgesics, unless scientifically justified and approved by the IACUC. 2. Guidelines for Tail Snips (collecting ≤2mm tissue from mice ≤21 days) A. A tail snip is easy to perform and does not cause pain or distress. The use of anesthesia is suggested but not required. B. Tail snipping should be performed using sharp scalpel blades, scissors or razor blades.
    [Show full text]
  • How Tools Should Be
    HOW TOOLS SHOULD BE THE CUTLERY RANGE CUTLERY FROM THE CUTTING EDGE INCLUDES We’ve transferred our DIY-equipment Scissors Displays skills to the kitchen, with a range of Traditional Scissors quality cutlery that we’ve produced for Homemaker Scissors over 200 years. The range is completed Speciality Scissors by precision-cutting scissors. Hairdressing Scissors Nail Scissors CONSTANT DEVELOPMENT Penknives Many of our cutlery products have a long Pocket-Knives tradition, but we never become complacent. Locking Penknives Constant developing and refining of our Kitchen Knives range keeps our knives at the cutting edge. Household/Kitchen Accessories Yes, we can stand the heat. A TOTAL GUARANTEE Traditional methods combined with the latest technology give us the confidence to guarantee the quality and performance of every single knife, and every last pair of scissors. HOW TOOLS SHOULD BE CUTLERY SCISSOR DISPLAY BOARD 8033LS SCISSOR DISPLAYS THE SCISSOR RANGE - The C.K high quality, comprehensive range of drop forged, hollow ground scissors offers practical elegance for every possible application. Either as a professional hardened and polished cutting tool or for use as a correctly set, universal cutter, C.K scissors provide whisper-sharp blades that cut along the whole blade length for optimum performance. CONTENTS Balance is built in to all C.K scissors for comfortable efficient QTY cutting, even over long periods of use. All scissors (except some CATALOGUE NO SIZE DESCRIPTION (OF EACH SIZE) 1 Industrial) are supplied in bright, point of sale display packaging. C8060 90mm/3 ⁄2” Nail Scissors, straight 6 1 C8061 90mm/3 ⁄2” Nail Scissors, curved 6 C8071 4 105mm/4” Nail Scissors, curved 6 1 SCISSOR DISPLAYS - C.K offer a range of attractive displays C807245 115mm/4 ⁄2” Pocket Scissors 6 to suit customers requirements.
    [Show full text]