17612_Sticks_P1_10 7/20/05 2:13 PM Page 1

Sticks & Stones Unlimited, Inc. www.sticksandstonesunl.com General Catalog

Distributed By: 17612_Sticks_P1_10 7/20/05 2:13 PM Page 2

Table of Contents Item Page

Aluminum Oxide Bench Stones Combination Ð Coarse/Fine Ð Oil Filled ...... 4 Single Grit Ð Oil Filled ...... 4 Silicon Carbide Bench Stones Combination Ð Coarse/Fine Ð Oil Filled ...... 5 Single Grit Ð Oil Filled ...... 5 Specialty “Economy” Norton Bench Stones ...... 5 Boron Carbide Dressing Sticks ...... 5 Tool Room And Die Finishing Stones Square Ð Aluminum Oxide & Silicon Carbide Ð Oil Filled ...... 6 Tr iangular Ð Aluminum Oxide & Silicon Carbide Ð Oil Filled ...... 7 Round Ð Aluminum Oxide & Silicon Carbide Ð Oil Filled ...... 8 Half Round Ð Aluminum Oxide & Silicon Carbide Ð Oil Filled ...... 9 Silversmiths’ Stones Aluminum Oxide ...... 10 Specialty Shapes Ð Aluminum Oxide ...... 10 Round Edge Slip Stones ...... 11 Arkansas Round Edge Slip Stones ...... 11 Hard Arkansas Carving Tools ...... 11 Hard Arkansas Jewelers Stone & Penknife Pieces ...... 11 Aluminum Oxide Engravers Pencils ...... 12 Engravers Chuck and Points ...... 12 Arkansas Bench Stones Ð Hard & Soft ...... 12 Mounted Arkansas Bench Stones In Box Ð Hard & Soft ...... 12 Arkansas Square And Triangle Files ...... 12 Special Shaped Arkansas Files Ð Hard Only ...... 13 Jointer Stones ...... 13 Pocket Stone With Plastic Pouch ...... 13 Molded Boat Rubs ...... 14 Gouge Sharpening Stone ...... 14 Carving Slips...... 14 Silicon Carbide Hand Hones ...... 14 General Purpose File ...... 14 Utility Files ...... 14 Carving Knife Sharpener ...... 15 Kitchen Knife Sharpener ...... 15 Home and Garden Sharpener ...... 15 Combination Axe Stone ...... 15 Machine Knife Stone ...... 15 Scythe Stones ...... 15 Tradesmen’s Stones ...... 15 Wheel Dresser ...... 16 Dressing Sticks ...... 16 Cutlery Bench Stones ...... 16 Crystolon Cutlers Stone ...... 16 Reversible Oil Stone in Beautiful Hinged Wood Box with Latch ...... 16 Wood Boxes Only ...... 16 S&S Burr Breaker ...... 17 Blanchard “Burr Busters” ...... 17 Aluminum Oxide/Soft Arkansas Combo ...... 17 Norton Multi-Oilstone Units ...... 17 Griddle Bricks ...... 18 Rubbing Brick with Handle ...... 18 Rubbing Bricks Ð Plain & Fluted ...... 18 Half Round Foundry Core Files ...... 18

2 17612_Sticks_P1_10 7/20/05 2:13 PM Page 3

Table of Contents (cont.) Item Page

Flat Core Files with Plastic Handles ...... 19 Fiberglass Reinforced Ð S/C Resin Bond ...... 19 Dressing Sticks ...... 19 Mold & Diemakers Polishing Stones ...... 20 Pencil Stones ...... 20 Diemaker Stones ...... 20 Moldmaker Stones ...... 21 Hard Moldmakers Stones ...... 21 EDM Stones ...... 21 Superfine Stones ...... 21 Resin Bonded Stones ...... 22 General Polishing Stones ...... 22 Hard Polishing Stones ...... 22 Ruby Stones ...... 22 Metal Polishing & Cleaning ...... 23 Rubber Bond Sticks ...... 23 Cotton Fiber Reinforced Resin Sticks ...... 23 MD-1 Mandrel Driver ...... 24 Superior Ð Tennessee Two Stone Hone ...... 26 Sunnen-Superior Ð Tennessee Hone ...... 27 Norton Diamond Hand Hones ...... 28 Portable Hone Kit ...... 29 ASI General Purpose Shop Hones ...... 29 BCD-Hone Kit ...... 29 Portable Honing Devices S&S-Mini ...... 30 S&S-Junior ...... 30 S&S-Middle ...... 30 Model S&S-Jumbo ...... 31 Model S&S-Maxi-Jumbo ...... 31 Hand Feed Portable Hone ASI-218 ...... 32 Alignerª Guided Sharpening Kits ...... 34 Diamond Whetstonesª - Bench Models ...... 34 Pocket Models ...... 34 Diafoldª Diamond Whetstoneª ...... 34 Diafoldª Sharpeners & Diafoldª Folding Files ...... 34 Diamond Mini-Sharpª Sharpener ...... 34 General Purpose Diamond Dressing Tools ...... 35 Single Point Tools ...... 35 Flex-Hone¨ Tool ...... 36 S&S Finishing Stick ...... 38 Norton Pacesetter Mounted Points A Shapes ...... 39 B Shapes ...... 40 B Shapes (continued) ...... 41 W Shapes ...... 42 W Shapes (continued) ...... 43 Terms and Conditions ...... 44

3 17612_Sticks_P1_10 8/3/05 12:50 PM Page 4

Min. Pkg. 1 Aluminum Oxide Bench Stones Std. Pkg. 5

Combination Ð Coarse/Fine Ð Oil Filled

UPC Code # Sticks & Norton Carbo Bay State Stone Size Approx. Weight 730006 Stones # # # # & Shape Per Std. Pkg. 00004 AB-64 IB-64 N.A. A80-CFO 4" DIA. x 1" THICK 7 lbs. 00005 AB-134 IB-134 #144 A75-CFO 4 x 1-3/4 x 5/8 3 lbs. 00003 AB-45 IB-45 N.A. A76-CFO 5 x 2 x 3/4 4 lbs. 00001 AB-6 IB-6 #433 A77-CFO 6 x 2 x 1 7 lbs. 00002 AB-8 IB-8 #431 A79-CFO 8 x 2 x 1 8 lbs.

Min. Pkg. 1 F = Fine M = Medium C = Coarse Std. Pkg. 5

Single Grit Ð Oil Filled

UPC Code # Sticks & Norton Carbo Bay State Stone Size Approx. Weight 730006 Stones # # # # & Shape Per Std. Pkg. 00078 AFB-14 FB-14 N.A. A60-FO 4 x 1 x 1/4 1 lbs. 00145 AMB-14 MB-14 N.A. A60-MO 4 x 1 x 1/4 1 lbs. 00009 ACB-14 CB-14 N.A. A60-CO 4 x 1 x 1/4 1 lbs. 00079 AFB-24 FB-24 N.A. A61-FO 4 x 1 x 1/2 2 lbs. 00146 AMB-24 MB-24 N.A. A61-MO 4 x 1 x 1/2 2 lbs. 00010 ACB-24 CB-24 N.A. A61-CO 4 x 1 x 1/2 2 lbs. 00080 AFB-35 FB-35 N.A. A63-FO 5 x 2 x 5/8 4 lbs. 00147 AMB-35 MB-35 N.A. A63-MO 5 x 2 x 5/8 4 lbs. 00076 AFB-6 FB-6 N.A. A66-FO 6 x 2 x 1 7 lbs. 00143 AMB-6 MB-6 N.A. A66-MO 6 x 2 x 1 7 lbs. 00007 ACB-6 CB-6 N.A. A66-CO 6 x 2 x 1 7 lbs. 00077 AFB-8 FB-8 N.A. A69-FO 8 x 2 x 1 8 lbs. 00144 AMB-8 MB-8 N.A. A69-MO 8 x 2 x 1 8 lbs. 00008 ACB-8 CB-8 N.A. A69-CO 8 x 2 x 1 8 lbs.

We Offer “Norton” Bear Brand sharpening oil Bear Oil is a highly refined sharpening stone oil which meets U.S. Pharmacopia standards of purity for mineral oils.

UPC Code # Sticks & Norton Carbo Bay State Approx. Weight Size 730006 Stones # # # # Per Std. Pkg. 00484 XB-1 XB-1 N.A. N.A. 4-1/2 oz. Can 8 lbs. 00486 XB-5 XB-5 N.A. N.A. 1 Pint Can 20 lbs. 00485 XB-2 XB-2 N.A. N.A. 1 Quart Can 20 lbs.

4 17612_Sticks_P1_10 7/20/05 2:13 PM Page 5

Min. Pkg. 1 Silicon Carbide Bench Stones Std. Pkg. 5

Combination Ð Coarse/Fine Ð Oil Filled

UPC Code # Sticks & Norton Carbo Bay State Stone Size Approx. Weight 730006 Stones # # # # & Shape Per Std. Pkg. 00450 SB-64 JB-64 #107 C80-CF 4" DIA. x 1" THICK 7 lbs. 00453 SB-134 JB-134 #112 C75-CF 4 x 1-3/4 x 5/8 3 lbs. 00449 SB-45 JB-45 #111 C76-CF 5 x 2 x 3/4 4 lbs. 00446 SB-6 JB-6 #109 C77-CF 6 x 2 x 1 7 lbs. 00448 SB-8 JB-8 #108 C79-CF 8 x 2 x 1 8 lbs.

Min. Pkg. 1 F = Fine M = Medium C = Coarse Std. Pkg. 5

Single Grit Ð Oil Filled

UPC Code # Sticks & Norton Carbo Bay State Stone Size Approx. Weight 730006 Stones # # # # & Shape Per Std. Pkg. 00265 FSB-14 FJB-14 #145 C60-F 4 x 1 x 1/4 1 lbs. 00380 MSB-14 MJB-14 #146 C60-M 4 x 1 x 1/4 1 lbs. 00217 CSB-14 CJB-14 #147 C60-C 4 x 1 x 1/4 1 lbs. 00266 FSB-24 FJB-24 #292F C61-F 4 x 1 x 1/2 2 lbs. 00381 MSB-24 MJB-24 #292M C61-M 4 x 1 x 1/2 2 lbs. 00218 CSB-24 CJB-24 #292C C61-C 4 x 1 x 1/2 2 lbs. 00267 FSB-35 FJB-35 #124 C63-F 5 x 2 x 5/8 4 lbs. 00382 MSB-35 MJB-35 #125 C63-M 5 x 2 x 5/8 4 lbs. 00263 FSB-6 FJB-6 #121 C66-F 6 x 2 x 1 7 lbs. 00378 MSB-6 MJB-6 #122 C66-M 6 x 2 x 1 7 lbs. 00215 CSB-6 CJB-6 #123 C66-C 6 x 2 x 1 7 lbs. 00264 FSB-8 FJB-8 N.A. C69-F 8 x 2 x 1 8 lbs. 00379 MSB-8 MJB-8 N.A. C69-M 8 x 2 x 1 8 lbs. 00216 CSB-8 CJB-8 N.A. C69-C 8 x 2 x 1 8 lbs. 00268 FSB-48 N.A. #118 N.A. 8 x 2 x 3/4 5 lbs. 00383 MSB-48 N.A. #119 N.A. 8 x 2 x 3/4 5 lbs. 00219 CSB-48 N.A. #120 N.A. 8 x 2 x 3/4 5 lbs. Special “Economy” Norton Bench Stones

00483 UPB-8 Quick Cut Stone 8 x 2 x 3/4 Std. Pk. 10 20 lbs.

Boron Carbide Dressing Sticks For tool room applications Ð Custom sizes also available

UPC Code # Sticks & Norton Boride Pdts. ESK 730006 Stones # # # # Stone Size & Shape 00538 B-1 Norbide Stick Boride Stick Tetrabor Stick 3/16 x 1/2 x 3

5 17612_Sticks_P1_10 7/20/05 2:13 PM Page 6

Bkn. Pkg. = 1-4 Tool Room And Die Finishing Stones Min. Pkg. = 5 Std. Pkg. = 20 F = Fine M = Medium C = Coarse

Square Ð Aluminum Oxide & Silicon Carbide Ð Oil Filled

UPC Code # Sticks & Norton Carbo Bay State Stone Size Approx. Weight 730006 Stones # # # # & Shape Per Std. Pkg. 00269 FSF-14 FJF-14 F-1 C1-F 4 x 1/4 SQ. 8 oz. 00384 MSF-14 MJF-14 M-1 C1-M SILICON 8 oz. 00485 CSF-14 N.A. C-1 C1-C CARBIDE 8 oz. 00081 AFF-14 FF-14 F-2 A1-FO 4 x 1/4 SQ. 8 oz. 00148 AMF-14 MF-14 M-2 A1-MO ALUMINUM 8 oz. 00011 ACF-14 N.A. C-2 A1-CO OXIDE 8 oz. 00272 FSF-34 FJF-34 F-5 C3-F 4 x 3/8 SQ. 1-1/4 lbs. 00387 MSF-34 MJF-34 M-5 C3-M SILICON 1-1/4 lbs. 00223 CSF-34 N.A. C-5 C3-C CARBIDE 1-1/4 lbs. 00084 AFF-34 FF-34 F-6 A3-FO 4 x 3/8 SQ. 1-1/4 lbs. 00151 AMF-34 MF-34 M-6 A3-MO ALUMINUM 1-1/4 lbs. 00014 ACF-34 N.A. C-6 A3-CO OXIDE 1-1/4 lbs. 00274 FSF-44 FJF-44 F-7 C5-F 4 x 1/2 SQ. 2-1/8 lbs. 00389 MSF-44 MJF-44 M-7 C5-M SILICON 2-1/8 lbs. 00225 CSF-44 N.A. C-7 C5-C CARBIDE 2-1/8 lbs. 00086 AFF-44 FF-44 F-8 A5-FO 4 X 1/2 SQ. 2-1/8 lbs. 00153 AMF-44 MF-44 M-8 A5-MO ALUMINUM 2-1/8 lbs. 00016 ACF-44 N.A. C-8 A5-CO OXIDE 2-1/8 lbs. 00271 FSF-26 N.A. C2-F 6 X 1/4 SQ. 12 oz. 00386 MSF-26 N.A. N.A. C2-M SILICON 12 oz. 00222 CSF-26 N.A. C2-C CARBIDE 12 oz. 00083 AFF-26 N.A. A2-FO 6 X 1/4 SQ. 12 oz. 00150 AMF-26 N.A. N.A. A2-MO ALUMINUM 12 oz. 00013 ACF-26 N.A. A2-CO OXIDE 12 oz. 00273 FSF-36 F-33 C4-F 6 X 3/8 SQ. 1-3/4 lbs. 00388 MSF-36 N.A. M-33 C4-M SILICON 1-3/4 lbs. 00224 CSF-36 C-33 C4-C CARBIDE 1-3/4 lbs. 00275 FSF-46 F-35 C6-F 6 X 1/2 SQ. 3 lbs. 00390 MSF-46 N.A. M-35 C6-M SILICON 3 lbs. 00226 CSF-46 C-35 C6-C CARBIDE 3 lbs. 00087 AFF-46 FF-46 F-36 A6-FO 6 X 1/2 SQ. 3 lbs. 00154 AMF-46 MF-46 M-36 A6-MO ALUMINUM 3 lbs. 00017 ACF-46 CF-46 C-36 A6-CO OXIDE 3 lbs. 00276 FSF-56 F-37 C8-F 6 X 5/8 SQ. 4-5/8 lbs. 00391 MSF-56 N.A. M-37 C8-M SILICON 4-5/8 lbs. 00227 CSF-56 C-37 C8-C CARBIDE 4-5/8 lbs. 00088 AFF-56 FF-56 F-38 A8-FO 6 X 5/8 SQ. 4-5/8 lbs. 00155 AMF-56 MF-56 M-38 A8-MO ALUMINUM 4-5/8 lbs. 00018 ACF-56 CF-56 C-38 A8-CO OXIDE 4-5/8 lbs. 00277 FSF-66 F-39 C9-F 6 X 3/4 SQ. 6-1/4 lbs. 00392 MSF-66 N.A. M-39 C9-M SILICON 6-1/4 lbs. 00228 CSF-66 C-39 C9-C CARBIDE 6-1/4 lbs. 00089 AFF-66 FF-66 F-40 A9-FO 6 X 3/4 SQ. 6-1/4 lbs. 00156 AMF-66 MF-66 M-40 A9-MO ALUMINUM 6-1/4 lbs. 00019 ACF-66 CF-66 C-40 A9-CO OXIDE 6-1/4 lbs. 00278 FSF-76 F-41 C10-F 6 X 1 SQ. 11-1/2 lbs. 00393 MSF-76 N.A. M-41 C10-M SILICON 11-1/2 lbs. 00229 CSF-76 C-41 C10-C CARBIDE 11-1/2 lbs. 00090 AFF-76 FF-76 F-42 A10-FO 6 X 1 SQ. 11-1/2 lbs. 00157 AMF-76 MF-76 M-42 A10-MO ALUMINUM 11-1/2 lbs. 00020 ACF-76 CF-76 C-42 A10-CO OXIDE 11-1/2 lbs.

6 17612_Sticks_P1_10 7/20/05 2:13 PM Page 7

Bkn. Pkg. = 1-4 Tool Room And Die Finishing Stones Min. Pkg. = 5 Std. Pkg. = 20 F = Fine M = Medium C = Coarse

Triangular Ð Aluminum Oxide & Silicon Carbide Ð Oil Filled

UPC Code # Sticks & Norton Carbo Bay State Size & Weight Per 730006 Stones # # # # Type Abrasive Std. Pkg. 00279 FSF-114 FJF-114 F-9 C15-F 4 x 1/4 TRI. 5 oz. 00394 MSF-114 MJF-114 M-9 C15-M SILICON CARBIDE 5 oz. 00091 AFF-114 FF-114 F-10 A15-FO 4 x 1/4 TRI. 5 oz. 00158 AMF-114 MF-114 M-10 A15-MO ALUMINUM 5 oz. 00021 ACF-114 N.A. C-10 A15-CO OXIDE 5 oz. 00281 FSF-134 FJF-134 F-13 C16-F 4 x 3/8 TRI. 10 oz. 00395 MFS-134 MJF-134 M-13 C16-M SILICON CARBIDE 10 oz. 00092 AFF-134 FF-134 F-14 A16-FO 4 x 3/8 TRI. 10 oz. 00160 AMF-134 MF-134 M-14 A16-MO ALUMINUM 10 oz. 00022 ACF-134 N.A. C-14 A16-CO OXIDE 10 oz. 00283 FSF-144 FJF-144 F-15 C17-F 4 x 1/2 TRI. 1 lb. 00396 MSF-144 MJF-144 M-15 C17-M SILICON 1 lb. 00233 CSF-144 N.A. C-15 C17-C CARBIDE 1 lb. 00094 AFF-144 FF-144 F-16 A17-FO 4 x 0 1/2 TRI. 1 lb. 00162 AMF-144 MF-144 M-16 A17-MO ALUMINUM 1 lb. 00024 ACF-144 CF-144 C-16 A17-CO OXIDE 1 lb. 00282 FSF-136 F-43 C14-F 6 x 3/8 TRI. 1-1/4 lbs. 03012 MSF-136 N.A. M-43 C14-M SILICON 1-1/4 lbs. 00232 CSF-136 C-43 C14-C CARBIDE 1-1/4 lbs. 00093 AFF-136 F-44 A14-FO 6 x 3/8 TRI. 1-1/4 lbs. 00161 AMF-136 N.A. M-44 A14-MO ALUMINUM 1-1/4 lbs. 00023 ACF-136 C-44 A14-CO OXIDE 1-1/4 lbs. 00095 AFF-146 FF-146 F-46 A18-FO 6 x 1/2 TRI. 1-1/2 lbs. 00163 AMF-146 MF-146 M-46 A18-MO ALUMINUM 1-1/2 lbs. 00025 ACF-146 CF-146 C-46 A18-CO OXIDE 1-1/2 lbs. 00096 AFF-156 FF-156 F-48 A19-FO 6 x 5/8 TRI. 2-1/8 lbs. 00164 AMF-156 MF-156 M-48 A19-MO ALUMINUM 2-1/8 lbs. 00026 ACF-156 CF-156 C-48 A19-CO OXIDE 2-1/8 lbs. 00097 AFF-166 FF-166 F-50 A20-FO 6 x 3/4 TRI. 2-3/4 lbs. 00165 AMF-166 MF-166 M-50 A20-MO ALUMINUM 2-3/4 lbs. 00027 ACF-166 CF-166 C-50 A20-CO OXIDE 2-3/4 lbs. 00098 AFF-176 FF-176 F-52 A22-FO 6 X 1 TRI. 5-3/.4 lbs. 00166 AMF-176 MF-176 M-52 A21-MO ALUMINUM 5-3/4 lbs. 00028 ACF-176 CF-176 C-52 A21-CO OXIDE 5-3/4 lbs.

7 17612_Sticks_P1_10 7/20/05 2:13 PM Page 8

Bkn. Pkg. = 1-4 Tool Room And Die Finishing Stones Min. Pkg. = 5 Std. Pkg. = 20 F = Fine M = Medium C = Coarse

Round Ð Aluminum Oxide & Silicon Carbide Ð Oil Filled

UPC Code # Sticks & Norton Carbo Bay State Size & Weight Per 730006 Stones # # # # Type Abrasive Std. Pkg. 00287 FSF-214 FJF-214 F25 C25-F 4 x 1/4 RD. 8 oz. 00399 MSF-214 MJF-214 M25 C25-M SILICON 8 oz. 00238 CSF-214 N.A. C25 C25-C CARBIDE 8 oz. 00099 AFF-214 FF-214 F26 A25-FO 4 x 1/4 RD. 8 oz. 00167 AMF-214 MF-214 M26 A25-MO ALUMINUM 8 oz. 00029 ACF-214 CF-214 C26 A25-CO OXIDE 8 oz. 00288 FSF-234 FJF-234 F29 C26-F 4 x 3/8 RD. 13 oz. 00401 MSF-234 MJF-234 M29 C26-M SILICON 13 oz. 00240 CSF-234 N.A. C29 C26-C CARBIDE 13 oz. 00100 AFF-234 FF-234 F30 A26-FO 4 x 3/8 RD. 13 oz. 00168 AMF-234 MF-234 M30 A26-MO ALUMINUM 13 oz. 00030 ACF-234 CF-234 C30 A26-CO OXIDE 13 oz. 00290 FSF-244 FJF-244 F31 C27-F 4 x 1/2 RD. 1-5/8 lbs. 00403 MSF-244 MJF-244 M31 C27-M SILICON 1-5/8 lbs. 00242 CSF-244 CJF-244 C31 C27-C CARBIDE 1-5/8 lbs. 00102 AFF-244 FF-244 F32 A27-FO 4 x 1/2 RD. 1-5/8 lbs. 00170 AMF-244 MF-244 M32 A27-MO ALUMINUM 1-5/8 lbs. 00032 ACF-244 CF-244 C32 A27-CO OXIDE 1-5/8 lbs. 00101 AFF-236 F64 A28-FO 6 x 3/8 RD. 1-3/4 lbs. 00169 AMF-236 N.A. M64 A28-MO ALUMINUM 1-3/4 lbs. 00031 ACF-236 C64 A28-CO OXIDE 1-3/4 lbs. 00291 FSF-246 F65 C29-F 6 x 1/2 RD. 2-3/8 lbs. 00404 MSF-246 N.A. M65 C29-M SILICON 2-3/8 lbs. 00243 CSF-246 C65 C29-C CARBIDE 2-3/8 lbs. 00103 AFF-246 FF-246 F66 A29-FO 6 x 1/2 RD. 2-3/8 lbs. 00171 AMF-246 MF-246 M66 A29-MO ALUMINUM 2-3/8 lbs. 00033 ACF-246 CF-246 C66 A29-CO OXIDE 3-5/8 lbs. 00104 AFF-256 FF-256 F68 A30-FO 6 x 5/8 RD. 3-5/8 lbs. 00172 AMF-256 MF-256 M68 A30-MO ALUMINUM 3-5/8 lbs. 00034 ACF-256 CF-256 C68 A30-CO OXIDE 3-5/8 lbs. 00105 AFF-266 FF-266 F70 A31-FO 6 x 3/4 RD. 4-7/8 lbs. 00173 AMF-266 MF-266 M70 A31-MO ALUMMINUM 4-7/8 lbs. 00035 ACF-266 CF-266 C70 A31-CO OXIDE 4-7/8 lbs. 00106 AFF-276 FF-276 F72 A32-FFO 6 x 1 RD. 9-1/4 lbs. 00174 AMF-276 MF-276 M72 A32-MO ALUMINUM 9-1/4 lbs. 00036 ACF-276 CF-276 C72 A32-CO OXIDE 9-1/4 lbs.

8 17612_Sticks_P1_10 7/20/05 2:13 PM Page 9

Bkn. Pkg. = 1-4 Tool Room And Die Finishing Stones Min. Pkg. = 5 Std. Pkg. = 20 F = Fine M = Medium C = Coarse

Half Round Ð Aluminum Oxide & Silicon Carbide Ð Oil Filled

UPC Code # Sticks & Norton Carbo Bay State Size & Weight Per 730006 Stones # # # # Type Abrasive Std. Pkg. 00295 FSF-314 F17 C35-F 4 x 1/4 H.R. 5 oz. 00408 MSF-314 N .A. M17 C35-M SILICON 5 oz. 00247 CSF-314 C17 C35-C CARBIDE 5 oz. 00107 AFF-314 FF-314 F18 A35-FO 4 x 1/4 H.R. 5 oz. 00175 AMF-314 MF-314 M18 A35-MO ALUMINUM 5 oz. 00037 ACF-314 CF-314 C18 A35-CO OXIDE 5 oz. 00296 FSF-334 F21 C36-F 4 x 3/8 H.R. 8 oz. 00410 MSF-334 N.A. M21 C36-M SILICON 8 oz. 00249 CSF-334 C21 C36-C CARBIDE 8 oz. 00109 AFF-334 FF-334 F22 A36-FO 4 x 3/8 H.R. 8 oz. 00177 AMF-334 MF-334 M22 A36-MO ALUMINUM 8 oz. 00039 ACF-334 CF-334 C22 A36-CO OXIDE 8 oz. 00298 FSF-344 F23 C37-F 4 x 1/2 H.R. 13 oz. 00412 MSF-344 N.A. M23 C37-M SILICON 13 oz. 00251 CSF-344 C23 C37-C CARBIDE 13 oz. 00111 AFF-344 FF-344 F24 A37-FO 4 x 1/2 H.R. 13 oz. 00178 AMF-344 MF-344 M24 A37-MO ALUMINUM 13 oz. 00041 ACF-334 CF-344 C24 A37-CO OXIDE 13 oz. 00110 AFF-336 FF-336 C54 A38-FO 6 x 3/8 H .R. 1 lb. 03011 AMF-336 MF-336 M54 A38-MO ALUMINUM 1 lb. 00040 ACF-336 CF-336 C54 A38-CO OXIDE 1 lb. 00299 FSF-346 F55 C39-F 6 x 1/2 H.R. 1-1/4 lbs. 00413 MSF-346 N.A. M55 C39-M SILICON 1-1/4 lbs. 00252 CSF-346 C55 C39-C CARBIDE 1-1/4 lbs. 00112 AFF-346 FF-346 F56 A39-FO 6 x 1/2 H.R. 1-1/4 lbs. 00179 AMF-346 MF-346 M56 A39-M0 ALUMINUM 1-1/4 lbs. 00042 ACF-346 CF-346 C56 A39-CO OXIDE 1-1/4 lbs. 00113 AFF-356 FF-336 F38 A40-FO 6 x 5/8 H.R. 1-7/8 lbs. 00180 AMF-356 MF-356 M58 A40-MO ALUMINUM 1-7/8 lbs. 00043 ACF-356 CF-356 C58 A40-CO OXIDE 1-7/8 lbs. 00114 AFF-366 FF-366 F60 A41-FO 6 x 3/4 H.R. 2-3/8 lbs. 00181 AMF-366 MF-366 M60 A41-MO ALUMINUM 2-3/8 lbs. 00044 ACF-366 CF-366 C60 A41-CO OXIDE 2-3//8 lbs. 00301 FSF-376 F61 C42-F 6 x 1H.R. 4-5/8 lbs. 00416 MSF-376 N.A. M61 C42-M SILICON 4-5/8 lbs. 00255 CSF-376 C61 C42-C CARBIDE 4-5/8 lbs. 00115 AFF-376 FF-376 F62 A42-FO 6 x 1H.R. 4-5/8 lbs. 00182 AMF-376 MF-376 M62 A42-MO ALUMINUM 4-5/8 lbs. 00045 ACF-376 CF-376 C62 A42-CO OXIDE 4-5/8 lbs.

9 17612_Sticks_P1_10 7/20/05 2:14 PM Page 10

Silversmiths’ Stones Broken Pkg. = 1-4 Minimum Pkg. = 5 Standard = 20 Aluminum Oxide

UPC Code # Sticks & Norton Carbo Bay State Weight Per Stone Size 730006 Stones # # # # Std. Pkg. and Shape 00120 AFF-444 FF-444 300A A246-FO 7 oz. 4 x 1/2 x 1/16 00187 AMF-444 MF-444 301A A246-MO 7 oz. 00050 ACF-444 CF-444 302A A246-CO 7 oz. FLAT 00123 AFF-474 FF-474 303A A248-FO 12 oz. 4 x 1/2 - 1/4 x 5/16 -1/8. 00190 AMF-474 MF-474 304A A248-MO 12 oz. 00053 ACF-474 CF-474 305A A248-CO 12 oz. FLAT DOUBLE TAPERED 00116 AFF-414 FF-414 306A A242-FO 7 oz. 4 x 5/16 x 3/16 - 1/16 00183 AMF-414 MF-414 307A A242-MO 7 oz. 00046 ACF-414 CF-414 308A A242-CO 7 oz. FLAT TAPERED 00122 AFF-464 FF-464 309A A249-FO 12 oz. 4 x 1/2 - 1/4 x 5/16 - 1/8 00189 AMF-464 MF-464 310A A249-MO 12 oz. 00052 ACF-464 CF-464 311A A249-CO 12 oz. OVAL DBL. TAPERED 00121 AFF-454 FF-454 312A A247-FO 7 oz. 4 x 1/2-3/16 x 3/16-1/16 00188 AMF-454 MF-454 313A A247-MO 7 oz. 00051 ACF-454 CF-454 314 A A247-CO 7 oz. OVAL BDL. TAPERED 00117 AFF-424 FF-424 315A A243-FO 6 oz. 4 x 3/8-3/16 x 1/8-1/16. 00184 AMF-424 MF-424 316A A243-MO 6 oz. 00047 ACF-424 CF-424 317A A243-CO 6 oz. OVAL DBL. TAPERED 00119 AFF-434 FF-434 318A A245-FO 11 oz. 4 x 7/16 x 3/16 x 1/8 00186 AMF-434 MF-434 319A A245-MO 11 oz. 00049 ACF-434 CF-434 320A A245-CO 11 oz. OVAL FLAT TAPER SIDES 00118 AFF-433 FF-433 321A A244-FO 10 oz. 3-1/2 x 7/16 x 3/16 00185 AMF-433 MF-433 322A A244-MO 10 oz. 00048 ACF-433 CF-433 323A A244-CO 10 oz. OVAL Specialty Shapes Ð Aluminum Oxide 00125 AFF-644 FF-644 334A A240-FO 15 oz. 4 x 1/2 x 1/4 00192 AMF-644 MF-644 335A A240-MO 15 oz. 00055 ACF-644 CF-644 336A A240-CO 15 oz. TAPERED ROUND 00124 AFF-544 FF-544 337A A241-FO 10 oz. 4 x1/2 x 1/4 00191 AMF-544 MF-544 338A A241-MO 10 oz. 00054 ACF-544 CF-544 339A A241-CO 10 oz. TAPERED TRIANGLE 00141 AFT-134 FT-134 340A A250-FO 10 oz. 4 x 9/16 x 3/16 00212 AMT-134 MT-134 341A A250-MO 10 oz. 00068 ACT-134 CT-134 342A A250-CO 10 oz. DIAMOND 00126 AFF-723 FF-723 97A A251-FO 7 oz. 3 x 5/16 BASE 00193 AMF-723 MF-723 98A A251-MO 7 oz. 00056 ACF-723 CF-723 99A A251-CO 7 oz. TAPERED POINT 00127 AFF-724 FF-724 N.A. A252-FO 13 oz. 4 x 1 x 1/8 BACK 00194 AMF-724 MF-724 N.A. A252-MO 13 oz. 00057 ACF-724 CF-724 N.A. A252-CO 13 oz. KNIFE STONE 00137 AFT-123 FT-123 N.A. A254-FO 1 lb. 3-1/2 x 3/4 x 3/16 00208 AMT-123 MT-123 N.A. A254-MO 1 lb. 00064 ACT-123 CT-123 N.A. A254-CO 1 lb. REAMER STONE 00138 AFT-124 FT-124 294F A255-FO 2-3/4 lbs. 4-1/2 x 1 x 5/16 00209 AMT-124 MT-124 294M A255-MO 2-3/4 lbs. 00065 ACT-124 CT-124 294C A255-CO 2-3/4 lbs. REAMER STONE 00139 AFT-125 FT-125 N.A. A256-FO 1-7/8 lbs. 5 x 1 x 3/16 00210 AMT-125 MT-125 N.A. A256-MO 1-7/8 lbs. 00066 ACT-125 CT-125 N.A. A256-CO 1-7/8 lbs. REAMER STONE 00140 AFT-126 FT-126 N.A. A257 -FO 3 lbs. 6 x 1 x 1/4 00211 AMT-126 MT-126 N.A. A257-MO 3 lbs. 00067 ACT-126 CT-126 N.A. A257-CO 3 lbs. REAMER STONE 00134 AFT-10 FT-10 18FT A260-FO 12 oz. 4'' LONG 00204 AMT-10 MT-10 18M A260-MO 12 oz. AUGER BIT STONE 10 17612_Sticks_P11_20 8/3/05 12:52 PM Page 11

Round Edge Slip Stones F = Fine M = Medium C = Coarse UPC Code # Sticks & Stones Norton Carbo. Bay State Weight Per Size Packaging 730006 # # # # Std. Pkg. 00306 FSS-10 N.A. 445F N.A. 4 x 1 x 1/8 x 3/16 00421 MSS-10 N.A. 445M N.A. SILICON CARBIDE 1 lb. 00307 FSS-14 N.A. 186 N.A. 4 x 1 x 7/16 x 3/16 00422 MSS-14 N.A. 187 N.A. SILICON CARBIDE 1-3/8 lbs. 00128 AFS-14 FS-14 N.A. A45-FO 4 x 1 x 7/16 x 3/16 00196 AMS-14 MS-14 N.A. A45-MO ALUMINUM OXIDE 1-3/8 lbs. 00308 FSS-24 FJS-24 177 C46-F 00423 MSS-24 MJS-24 178 C46-M 4-1/2 x 1-3/4 x 1/4 x 1/16 1-3/8 lbs. 00258 CSS-24 CJS-24 179 C46-C SILICON CARBIDE 00130 AFS-24 FS-24 N.A. A46-FO 00199 AMS-24 MS-24 N.A. A46-MO 4-1/2 x 1-3/4 x 1/4 x 1/16 1-3/8 lbs. 00059 ACS-24 CS-24 N.A. A46-CO ALUMINUM OXIDE 00131 AFS-34 FS-34 N.A. A47-FO Bkn. = 1-4 00201 AMS-34 MS-34 N.A. A47-MO 4-1/2 x 1-3/4 x 3/8 x 1/8 Min. = 5 2 lbs. 00060 ACS-34 CS-34 N.A. A47-CO ALUMINUM OXIDE Std. = 10 00311 FSS-44 FJS-44 183 C48-F 00424 MSS-44 MJS-44 184 C48-M 4-1/2 x 1-3/4 x 1/2 x 3/16 2-1/2 lbs. 00259 CSS-44 CJS-44 185 C48C SILICON CARBIDE 00132 AFS-44 FS-44 N.A. A48-FO 00203 AMS-44 MS-44 N.A. A48-MO 4-1/2 x 1-3/4 x 1/2 x 3/16 2-1/2 lbs. 00061 ACS-44 CS-44 N.A. A48-CO ALUMINUM OXIDE 00426 MSS-54 MJS-54 181 C49-M 4-1/2 x 2-1/8 x 5/8 x 5/16 3-1/4 lbs. 00129 AFS-15 FS-15 293F A50-FO 5 x 1 x 5/16 x 3/32 00197 AMS-15 MS-15 293M A50-MO ALUMINUM OXIDE 1-1/8 lbs. 00313 FSS-66 FJS-66 174 C51-F 00427 MSS-66 MJS-66 175 C51-M 6 x 2-1/4 x 3/4 x 3/8 5-3/4 lbs. 00261 CSS-66 CJS-66 176 C51-C SILICON CARBIDE Arkansas Round Edge Slip Stones Hard and Soft Arkansas 00344 HAS-3 HS-3 3 x 1-3/4-2 x 1/4-3/8 x 1/16-1/8 Hard 1-1/2 lbs. Bkn.=1-4 00345 HAS-4 HS-4 4 x 1-3/4-2 x 3/8-1/2 x 1/8-3/16 Hard 2-1/2 lbs. Min.=5 00347 HAS-14 HS-14 4 x 1-1/4-1-1/2 x 1/4-3/8 x 1/8 Sharp Edge 1-3/8 lbs. Std.=10 00445 SAS-4 SS-4 4 x 1-3/4-2 x 3/8-1/2 x 1/8-3/16 Soft 2 lbs.

Hard Arkansas Carving Tools 00346 HAS-12 HS-12 2-1/4 x 7/8 x 3/16 Round Edge Double Angle 12 oz. Bkn.=1-4 00348 HAS-22 HS-22 2-1/4 x 7/8 x 3/16 Round Edge Single Angle 12 oz. Min.=5 00349 HAS-32 HS-32 2-1/4 x 7/8 x 3/16 Square Edge Double Angle 12 oz. Std.=10 00350 HAS-42 HS-42 2-1/4 x 7/8 x 3/16 Square Back Knife Blade 8 oz. Hard Arkansas Jewelers Stone & Penknife Pieces And Soft Arkansas Penknife Pieces 00323 HAB-24 HB-24 4 x 2 x 3/8-1/2 Jewelers Stone Min. = 1, Std. = 5 2 lbs. 00321 HAB-13 HB-13 3 x 1 x 1/4-3/8 Penknife Piece Min. = 5, Std. = 10 1-1/4 lbs. 00322 HAB-14 HB-14 4 x 1 x 1/4-3/8 Penknife Piece Min. = 5, Std. = 10 1-3/4 lbs. 00438 SAB-13 SB-13 3 x 1 x 1/4-3/8 Soft Penknife Piece Min. = 5, Std. = 10 1-1/4 lbs. 00439 SAB-14 SB-14 4 x 1 x 1/4-3/8 Soft Penknife Piece Min. = 5, Std. = 10 1-3/4 lbs.

11 17612_Sticks_P11_20 7/20/05 2:03 PM Page 12

Aluminum Oxide Engravers Pencils

UPC Code # Sticks & Stones Norton Weight Per Size and Description Packaging 730006 # # Std. Pkg. 00357 HIT-17 IT-17 7" Long Pencil w/1/8" square India Stone Min. = 5, Std. = 10 14 oz.

Engravers Chuck and Points 00469 SSXT-1 XT-1 Chuck Only Min. = 5, Std. = 10 6 oz. 00135 AFT-11 FT-11 1 x 1/8 Round FIne Aluminum Oxide B = 1, M = 5 S = 20 3 oz.

Arkansas Bench Stones Ð Hard & Soft 00318 HAB-4 HB-4 4 x 2 x 3/4-1 Hard Bench Stone Min. = 1, Std. = 5 3 lbs. 00319 HAB-6 HB-6 6 x 2 x 3/4-1 Hard Bench Stone Min. = 1, Std. = 5 4-3/4 lbs. 00320 HAB-8 HB-8 8 x 2 x 3/4-1 Hard Bench Stone Min. = 1, Std. = 5 6-1/4 lbs. 00435 SAB-4 SB-4 4 x 2 x 3/4-1 Soft Bench Stone Min. = 1, Std. = 5 3 lbs. 00436 SAB-6 SB-6 6 x 2 x 3/4-1 Soft Bench Stone Min. = 1, Std. = 5 4-3/4 lbs. 00437 SAB-8 SB-8 8 x 2 x 3/4-1 Soft Bench Stone Min. = 1, Std. = 5 6-1/4 lbs.

Mounted Arkansas Bench Stones in Box Ð Hard & Soft 00340 HAM-4 HM-4 4 x 1-7/8 Hard Mounted Bench Stone Min. = 1, Std. = 5 3 lbs. 00341 HAM-6 HM-6 6 x 1-7/8 Hard Mounted Bench Stone Min. = 1, Std. = 5 5-3/4 lbs. 00342 HAM-8 HM-8 8 x 1-7/8 Hard Mounted Bench Stone Min. = 1, Std. = 5 7-3/4 lbs. 00440 SAM-3 SM-3 3-1/2 x 1 Soft Mounted Bench Stone Min. = 1, Std. = 5 1-1/4 lbs. 00441 SAM-4 SM-4 4 x 1-7/8 Soft Mounted Bench Stone Min. = 1, Std. = 5 3 lbs. 00442 SAM-6 SM-6 6 x 1-7/8 Soft Mounted Bench Stone Min. = 1, Std. = 5 5-3/4lbs. 00443 SAM-8 SM-8 8 x 1-7/8 Soft Mounted Bench Stone Min. = 1, Std. = 5 7-3/4lbs.

Arkansas Square and Triangle Files 00326 HAF-13 HF-13 3-3-1/2 x 1/4 Square B = 1, M = 5 S = 10 4 oz. 00327 HAF-33 HF-33 3-3-1/2 x 3/8 Square B = 1, M = 5 S = 10 9 oz. 00328 HAF-43 HF-43 3-3-1/2 x 1/2 Square B = 1, M = 5 S = 10 14 oz. 00329 HAF-113 HF-113 3-3-1/2 x 1/4 Triangle B = 1, M = 5 S = 10 3 oz. 00330 HAF-133 HF-133 3-3-1/2 x 3/8 Triangle B = 1, M = 5 S = 10 5 oz. 00331 HAF-143 HF-143 3-3-1/2 x 1/2 Triangle B = 1, M = 5 S = 10 7 oz.

12 17612_Sticks_P11_20 7/20/05 2:03 PM Page 13

Special Shaped Arkansas Files Ð Hard Only

UPC Code # Sticks & Stones Norton Weight Per Size and Description Packaging 730006 # # Std. Pkg. 00332 HAF-813 HF-813 3-3-1/2 x 1/4 x 5/16 Round B = 1, M = 5 S = 10 5 oz. 00333 HAF-823 HF-823 3-3-1/2 x 3/8-1/2 x 1/8-3/16 Flat B = 1, M = 5 S = 10 6 oz. 00334 HAF-833 HF-833 3-3-1/2 x 3/8-1/2 x 1/8-3/16 Bevel B = 1, M = 5 S = 10 6 oz. 00335 HAF-843 HF-843 3-3-1/2 x 1/2 x 3/16-1/4 Diamond B = 1, M = 5 S = 10 5 oz. 00336 HAF-853 HF-853 3-3-1/2 x 1/2 x 3/16-1/4 Oval B = 1, M = 5 S = 10 6 oz. 00337 HAF-863 HF-863 3-3-1/2 x 1/4 Base - Point B = 1, M = 5 S = 10 3 oz. 00338 HAF-873 HF-873 3-4 x 3/4-1 x 1/8-1/4 Knife Blade B = 1, M = 5 S = 10 7 oz.

Jointer Stones provide a fast method of restoring and maintaining the cutting edges of mechanical jointing Jointer Stones devices on automatic planers

UPC Code # Sticks & Stones Norton Carbo. Bay State Weight Per Size Packaging 730006 # # # # Std. Pkg. 00456 SE-64 JE-54 425 C-149 1/4 x 3/4 x 4 B = 1, M = 5 S = 10 1 lb. 00457 SE-64 JE-64 428 C-150 5/16 x 3/4 x 4 B = 1, M = 5 S = 10 1 lb. 00458 SE-74 JE-74 390 C-151 3/8 x 3/4 x 4 B = 1, M = 5 S = 10 1-1/2 lbs. 00459 SE-84 JE-84 373 C-152 1/2 x 3/4 x 4 B = 1, M = 5 S = 10 1-1/2 lbs. 00460 SE-104 JE-104 391 C-153 3/4 x 3/4 x 4 B = 1, M = 5 S = 10 2-1/8 lbs. 00071 AE-54 IE-54 425 A-149-O 1/4 x 3/4 x 4 B = 1, M = 5 S = 10 1 lb. 00072 AE-64 IE-64 428 A-150-O 5/16 x 3/4 x 4 B = 1, M = 5 S = 10 1 lb. 00073 AE-74 IE-74 426 A-151-O 3/8 x 3/4 x 4 B = 1, M = 5 S = 10 1-1/2 lbs. 00074 AE-84 IE-84 438 A-152-O 1/2 x 3/4 x 4 B = 1, M = 5 S = 10 1-1/2 lbs. 00075 AE-104 IE-104 440 A-153-O 3/4 x 3/4 x 4 B = 1, M = 5 S = 10 2-1/8 lbs.

Pocket Stone With Plastic Pouch Medium Grit (220) Silicon Carbide

00368 JP-14 JP-14 149 N.A. 3 x 7/8 x 3/8 M = 1, S = 10 1-1/2 lbs. Medium Silicon Carbide (220) Pocket Stones 00463 SJP-13 JP-14 149 N.A. 3 x 7/8 x 3/8 Med. S/C M = 1, S = 10 1-1/4 lbs.

This world renowned hand hone of Norton Green Crystolon is the most famous sharpening stone known to industry.

Available in Three Grit Sizes, 220 Ð 280/320 and 400.

00315 GSHH-13 CG220-PV 39 3/8 x 3/16 x 4-3/16 Green S/C Sold in brackets 50 = 7-1/2 lbs. 00316 GSHH-14 CG280/320-PV 38 3/8 x 3/16 x 4-3/16 Green S/C Sold in brackets 50 = 7-1/2 lbs. 00317 GSHH-15 CG400-PV 37 3/8 x 3/16 x 4-3/16 Green S/C Sold in brackets 50 = 7-1/2 lbs.

13 17612_Sticks_P11_20 7/20/05 2:03 PM Page 14

Molded Boat Rubs

UPC Code # Size and Description Grit 730006 * 1-1/2 x 2-3/8 x 9 Aluminum Oxide 60 & 80 See Price Book * 1-1/2 x 2-3/8 x 9 Silicon Carbide 46 & 80 See Price Book

The Gouge Stone is indespens- Aluminum Oxide (India) able for the tools of the artist, craftsman and woodworkers. Gouge Sharpening Stone Designed for curved edge tools.

UPC Code # Sticks & Stones Norton Carbo. Bay State Weight Per Size Packaging 730006 # # # # Std. Pkg. 00133 AFS-76 FS-76 15 A115-FO 6 x 2 x 1 x 1/2 x 3/8 B = 1, M = 5, S = 10 5-3/4 lbs.

Carving Tool Slips are excellent Aluminum Oxide (India) for final finish on all carving tools. The extreme hardness Carving Slips gives long life. Medium Grit only.

00195 AMS-12 MS-12 N.A. A82-MO 2-1/4 x 7/8 x 3/16 B = 1, M = 5, S = 20 13 oz. 00198 AMS-22 MS-22 N.A. A83-MO 2-1/4 x 7/8 x 3/16 B = 1, M = 5, S = 20 11 oz. 00200 AMS-32 MS-32 N.A. A84-MO 2-1/4 x 7/8 x 3/16 B = 1, M = 5, S = 20 10 oz. 00202 AMS-42 MS-42 N.A. A81-MO 2-1/4 x 7/8 x 3/16 B = 1, M = 5, S = 20 8 oz.

Silicon Carbide Hand Hones Carving Tool Slips are excellent for final finish on all carving tools. The extreme hardness gives long life. Medium Grit only.

00314 FST-63 FJT-63 F33 C237 3-1/2 x 3/4 x 1/2 B = 1, M = 5, S = 20 2 lbs. 00428 MST-63 MJT-63 M33 C238 3-1/2 x 3/4 x 1/2 B = 1, M = 5, S = 20 2 lbs. 00262 CST-63 CJT-63 C33 C239 3-1/2 x 3/4 x 1/2 B = 1, M = 5, S = 20 2 lbs.

The right size and shape to allow widespread use on a General Purpose File variety of home and garden tools.

00473 ST-911 JT-911 198 C253 9-1/2 x 1-3/8 x 1/2 M = 1, S = 10 5 lbs.

Utility Files SD-2 Medium, Single Grit SD-3 Combination, Coarse/Fine 00454 SD-2 JD-2 57 C5 14" Overall B = 1, M = 5, S = 10 12-1/2 lbs. 00455 SD-3 JD-3 75 N.A. 14" Overall B = 1, M = 5, S = 10 12-1/2 lbs.

14 17612_Sticks_P11_20 7/20/05 2:03 PM Page 15

Carving Knife Sharpener

Sharpener is medium grit, reinforced with steel rod.

UPC Code # Sticks & Stones Norton Carbo. Weight Per Size and Description Packaging 730006 # # # Std. Pkg. 00467 SKPT-2 KPT-2 76 13-3/4" O/A with Handle B = 1, M = 5, S = 20 11 lbs.

Kitchen Knife Sharpener

For all kitchen knives, fine grit. 00433 S273A 273A 66 7-1/2" O/A with Handle M = 1, S = 10 3 lbs.

Home and Garden Sharpener

One flat side, one convex, ideal for all garden tools. 00466 SJT-8 JT-8 46 10-1/2" O/A with Handle B = 1, M = 5, S = 20 10 lbs.

Combination Axe Stone The Combination Axe Stone is the best tool for axe & hatchet sharpening, coarse/fine, lubricate with oil.

00465 SJT-3 JT-3 196 C-120 3" Dia. x 5/8" Thick M = 1, S = 10 3 lbs.

Machine Knife Stone The Machine Knife Stone is for the sharpening and honing of paper, cloth and veneer knives while on the machine. No need to remove the knives from the machine until in need of a major re-grind. Each stone has a finger groove to provide safety. Oil filled combinatian grit. 00451 SB-74 JB-74 289 4" Dia. x 1-1/2" Thick M = 1, S = 5 6-1/4 lbs. Scythe Stones Aluminum Oxide = ATD-1 Silicon Carbide = TS-3

Made for scythes, sickles and mowing machines.

00214 ATD-1 TD-1 188 10 x 1-5/16 x 3/4 B = 1, M = 5, S = 10 8 lbs. 00481 TS-3 TJ-3 192 10 x 1-1/4 x 3/4 B = 1, M = 5, S = 10 8 lbs.

Tradesmen’s Stones For sharpening of knives for trimming leather, rubber, plastic and carpet. ST-930 is combination, ST-920 is single grit medium, ST-910 no handle.

00475 ST-930 JT-930 75 14-3/4" O/A with Handle B = 1, M = 5, S = 10 9 lbs. 00474 ST-920 JT-920 129 14-3/4" O/A with Handle B = 1, M = 5, S = 10 9 lbs. 00472 ST-910 JT-910 N.A. 10 x 1-1/4 x 3/4 B = 1, M = 5, S = 10 7 lbs.

15 17612_Sticks_P11_20 7/20/05 2:03 PM Page 16

Wheel Dresser The Wheel Dresser is widely used to clean, true and shape the face of a grinding wheel, used with the ST-246 Dressing Stick below.

UPC Code # Sticks & Stones Norton Carbo. Weight Per Size and Description Packaging 730006 # # # Std. Pkg. 00354 HD-6 H-6 55 10" O/A with Handle B = 1, M = 5, S = 10 5-5/8 lbs. Dressing Sticks Dressing Sticks are commonly used by hand or in the HD-6 above. Used to clean, true or form the face of a grinding wheel.

00470 ST-246 JT-246 56 1/2" Round x 6" Long B = 1, M = 5, S = 10 1 lb. 00471 ST-276 JT-276 N.A. 1" Round x 6" Long B = 1, M = 5, S = 10 3-5/8 lbs. Cutlery Bench Stones Giant Combination Fine & Coarse in metal box.

UPC Code # Sticks & Stones Weight Per Size and Description Packaging 730006 # Std. Pkg. 00360 IM-11 Stone w/box 11-1/2 x 2-1/2 x 1 Coarse & Fine A/O M = 1, S = 2 10 lbs. 00358 IM-2 Stone only 11-1/2 x 2-1/2 x 1 Coarse & Fine A/O M = 1, S = 2 5 lbs. 00373 JUM-22 Stone w/box 11-1/2 x 2-1/2 x 1 Coarse & Fine S/C M = 1, S = 2 10 lbs. 00371 JUM-3 Stone only 11-1/2 x 2-1/2 x 1 Coarse & Fine S/C M = 1, S = 2 5 lbs.

Crystolon Cutlers Stone

Coarse & Fine combination stone only

00372 JUM-4 Stone only 1/2 x 2-1/2 x 1-1/2 Coarse & Fine S/C M = 1, S = 2 7 lbs.

Reversible Oil Stone in Beautiful Hinged Wood Box with Latch

00356 HIB-27 Stone w/box 7 x 2 x 1 Fine A/O & Hard Arkansas M = 1, S = 2 5 lbs. 00462 SIB-27 Stone w/box 7 x 2 x 1 Medium A/O & Soft Arkansas M = 1, S = 2 5 lbs.

Wood Boxes Only

For use with any stone you prefer.

00476 SXT-4 Bench Stone Box for all 4 x 2 x 1 Stones Sold in brackets * 00477 SXT-6 Bench Stone Box for all 6 x 2 x 1 Stones Sold in brackets * 00478 SXT-8 Bench Stone Box for all 8 x 2 x 1 Stones Sold in brackets *

16 17612_Sticks_P11_20 7/20/05 2:04 PM Page 17

S&S Burr Breaker The perfect, lowest cost method of removing burrs from magnetic chucks and for scouring any flat metal surface.

UPC Code # Sticks & Stones Size One Specification Only Sold in Quantity Brackets 730006 * Burr Breaker 1-5/8 x 4 x 4 Standard 1 - 3 - 10 - 25+

Blanchard “Burr Busters” For use in removing burrs on magnetic chucks or scouring any flat surface.

UPC Code # The Blanchard Size One Specification Only Sold in Quantity Brackets 730006 Company 00524 Burr Buster 1-9/16 x 4-3/8 x 6 Standard 1 - 5 - 10

Aluminum Oxide/ Soft Arkansas Combo A unique combination stone made by bonding a coarse aluminum oxide stone and a soft Arkansas stone together.

00461 SIB-6 Stone only 6 x 2 x 1 Coarse A/O & Soft Arkansas Comb. M = 1, S = 5 6 lbs.

Norton Multi-Oilstone Units The Norton Multi-Oilstone is the most popular choice of commercial kitchens across the country. For com- plete sharpening of all cutlery. This combination of three oil filled, reversible stones includes coarse Crystolon, medium Crystolon, and precision sharpening fine India stones. The two sides not in use are immersed in oil. There is a heavy non-skid base with suction cup foot-pieces. Unit comes with one pint of Norton Bear Brand sharpening oil. Replacement parts are available on request.

UPC Code # Sticks & Stones Size and Description Weight Per Std. Pkg. Packaging 73006 00363 IM-313 5-1/2 x 6 x 16 13 lbs. Standard = 1 00362 IM-100 4 x 4 x 9-1/2 3 lbs. Standard = 1 Replacement Stones 00351 HR-115 11-1/2 x 2-1/2 x 1/2 Hard Arkansas 1-1/4 lbs. Standard = 1 00359 IM-9 11-1/2 x 2-1/2 x 1/2 Fine India 3 lbs. M = 1, S = 2 00365 JM-6 11-1/2 x 2-1/2 x 1/2 Medium S/C 3 lbs. M = 1, S = 2 00364 JM-3 11-1/2 x 2-1/2 x 1/2 Coarse S/C 3 lbs. M = 1, S = 2 00468 SR-115 11-1/2 x 2-1/2 x 1/2 Soft Arkansas 1 lb. S = 1 03000 HR-26 6 x 2 x 1/2 Hard Arkansas 3 lbs. M = 1, S = 5 00361 IM-91 6 x 2 x 1/2 Fine India 3 lbs. M = 1, S = 5 00367 JM-61 6 x 2 x 1/2 Medium S/C 3 lbs. M = 1, S = 5 00366 JM-31 6 x 2 x 1/2 Coarse S/C 3 lbs. M = 1, S = 5 03001 SR-26 6 x 2 x 1/2 Soft Arkansas 3 lbs. M = 1, S = 5

17 17612_Sticks_P11_20 7/20/05 2:04 PM Page 18

Griddle Bricks Griddle Bricks Ð The sanitary method of cleaning and scouring griddles and cooking plates. Faster, easier, as well as cleaner and less expensive than all other methods. Rounded edges for comfortable hand grip. Not oil filled. Available only in medium grit. Sold in quantity brackets found in price book.

UPC Code # Sticks & Stones Norton Carbo. Bay State Weight Per Size 730006 # # # # Stone 00142 AIT-4 IT-4 217 A-201 4-1/2 x 3 x 2 1-3/4 lbs.

Rubbing Brick with Handle Hand Rubs with plastic handles make quick work of removing mold marks, rubbing down green concrete and are ideal for floor, overhead and wall work. Concrete workers and masons appreciate the handle which reduces fatigue. Extra coarse.

UPC Code # Sticks & Stones Norton Industry Weight Per Size 730006 # # # Stone 00516 SHR-250 235 HR-250 8 x 3-1/2 x 1-1/2 1-3/4 lbs. 00517 SHR-252 BFH-6 HR-252 6 x 3 x 1 1-1/4 lbs. Rubbing Bricks Ð Plain & Fluted Silicon carbide rubbing bricks without handles are available in two types, plain and fluted. Plain rubs are the choice of machinists and foundrymen for dressing grinding wheels and cleaning and scouring castings. Fluted rubs are used in concrete applications for rubbing down green concrete to remove mold marks. The diagonal flutes provide shearing action and carry away debris. Sold in quantity brackets.

UPC Code # Industry Weight Per Sticks & Stones Size Type 730006 # Stone 00498 SHR-201/BP-14 HR-201 4 x 2 x 1 Plain 3/4 lbs. 00499 SHR-202/BP-24 HR-202 4 x 2 x 2 Plain 1-1/3 lbs. 00502 FR510/SHR-211/BP-16 HR-211 6 x 2 x 1 Plain 1 lb. 00503 SHR-213/BP-26 HR-213 6 x 2 x 2 Plain 2-1/4 lbs. 00507 FR520/SHR-222/BP-18 HR-222 8 x 2 x 1 Plain 1-3/4 lbs. 00508 SHR-225/BP-28 HR-225 8 x 2 x 2 Plain 2-3/4 lbs. 00512 SHR-241/BF-26 HR-241 6 x 2 x 2 Fluted 2 lbs. 00513 SHR-242/BF-28 HR-242 8 x 2 x 2 Fluted 2-1/2 lbs.

Half Round Foundry Core Files

UPC Code # Overall Product Number A Dimension L Dimension 730006 Length End Size 02370 #25 Half Round 3-3/4" 6" 8" Large 7/16 x 7/8, Small 5/16 x 5/8 02371 #26 Half Round 5-1/4" 8" 11" Large 15/32 x 15/16, Small 11/32 x 11/16 02372 #27 Half Round 6-3/4" 10" 13" Large 17/32 x 1-1/16, Small 3/8 x 3/4 02373 #28 Half Round 8-1/4" 12" 15" Large 19/32 x 1-3/16, Small 7/16 x 7/8

18 17612_Sticks_P11_20 7/20/05 2:04 PM Page 19

Flat Core Files with Plastic Handles Fiberglass Reinforced Ð S/C Resin Bond Lower cost flat core files are available in any size desired. They are centrally reinforced with fiberglass to retard breakage. Made of resin bond silicone carbide abrasive in a very coarse grit to aggressively file sand cores.They are custom made to any size required, but come in a number of standard sizes as follows:

Standard Size List

1/8 x 1/2 x 8 1/4 x 1 x 12 1/2 x 1 x 12 1/8 x 1 x 9 1/4 x 2 x 12 1/2 x 2 x 10 1/8 x 1 x 12 1/2 x 1 x 9 1/2 x 2 x 12 1/4 x 1 x 9 1/2 x 1 x 10

Flat core files are much more economical to use than the metal tang type, half round core files mentioned earlier. Big savings are available by using this type file. All are made from a very coarse grit silicon carbide abrasive of a very hard resin bond for long life and aggressive cut.

Jointer & Pattern Stones We custom manufacture jointer and pattern stones for all applications. We stock slabs from which we cut all sizes and specifications used in joining and molding manufacturing. We make any size, abrasive type, grit size and hardness from slabs which are in stock. Lead time is only three weeks. Standard size list as follows:

Standard Size List

1/4 x 3/4 x 4 5/16 x 3/4 x 4 3/8 x 3/4 x 4 1/2 x 3/4 x 4 3/4 x 3/4 x 4 3/4 x 2 x 4 3/4 x 2 x 6 3/4 x 2 x 8 .590 x 2 x 6 .590 x 2-1/4 x 6 .590 x 2 x 6 .590 x 2-1/4 x 8 Molding and pattern stones are available in superfine grit down to 1200.

Dressing Sticks For Vitrified Grinding Wheels - Stock Sizes 1/2 x 1/2 x 6 C24-RV 3/4 x 3/4 x 6 C24-RV 3/4 x 3/4 x 8 C24-RV 1 x 1 x 6 C24-RV 1 x 2 x 6 C24-RV 1 x 1 x 8 C24-RV 1/2 x 1 x 6 C24-RV 2 x 2 x 8 C24-RV 1 x 2 x 8 C24-RV 2 x 2 x 6 C24-RV 1 x 1 x 6 C46-RV 1/2 x 6 RD. C24-RV 1 x 6 RD. C24-RV 1 x 1 x 8 C46-RV For Diamond & CBN Wheels - Stock Sizes 1/2 x 1/2 x 6 38A150-IVBE 1/2 x 1/2 x 6 x 38A220-IVBE 3/4 x 3/4 x 4 38A150-IVBE 3/4 x 3/4 x 4 x 38A220-IVBE 1 x 1 x 6 38A150-IVBE 1 x 1 x 6 x 38A220-IVBE Many other sizes are available but may be limited in stock. Please call our excellent customer service staff for custom sizes, specifications and recommendations.

19 17612_Sticks_P11_20 7/20/05 2:04 PM Page 20

Mold & Diemakers Polishing Stones

Series Type Description D Diemaker Medium Hard Regular Aluminum Oxide, for fast cutting action, for general polishing.

MMoldmaker Solft Silicon Carbide, non loading with even breakdown readily conforms to shape fo work surface.

EDM EDM Special Aluminum Oxide for use on electrical discharge machining surfaces.

HM Hard Moldmaker Medium Hard Silicon Carbide for general polishing.

SF Super Fine Calcined Alumina with a soft bond, 900 grit only, for superfinishing applications.

B Resin Bond Very Hard Aluminum Oxide for fine detail work, holds shape and produces a fine finish.

OT Hard Polishing Premium Aluminum Oxide in a hard bond, holds shape for polishing ribs, slots & etc., oil treated.

Premium Aluminum Oxide in a medium hard bond for general polishing, wax treated for load WT General Polishing resistance. R Ruby Aluminum Oxide with a soft bond for fast stock removal.

Availability Chart Pencil Stones Diemaker Stones 5/32 x 5/32 x 4 General Purpose Alum. Oxide, Medium Hard, White to Tan PSA PSR PSO PSE Size 100 150 220 320 400 500 600 900 1/4" RD. x 6 Diemaker Resin Bonded Oil Treated EDM Stone Alum. Oxide Alum. Oxide Alum. Oxide Premium A/O 3/8" RD. x 6 Medium Hard Extra Hard Hard Hard White To Tan Dark Brown Cream Color Salmon Color 1/2" RD. x 6 1/16 x 1/4 x 6 Grit Price Grit Price Grit Price Grit Price 1/8 x 1/4 x 6 150 180 120 120 1/4 x 1/4 x 6 220 220 220 150 3/8 x 3/8 x 6 All sizes in all grits available 320 320 320 180 1/16 x 1/2 x 6 400 400 400 220 1/8 x 1/2 x 6 500 600 600 320 1/4 x 1/2 x 6 600 N.A. N.A. 400 1/2 x 1/2 x 6 800 N.A. N.A. 500 1/4 x 1 x 6 900 N.A. N.A. 600 1/8 x 1 x 6 1/4 x 3/4 x 6 1/2 x 1 x 6 1 x 1 x 6

20 17612_Sticks_P21_30 7/20/05 10:02 AM Page 21

Moldmaker Stones Soft Silicon Carbide Vitrified, Green, Gray, Black

Stone Grit Size 150 220 320 400 500 600 EDM Stones 1/4" RD. x 6 3/8" RD. x 6 Hard Premium Aluminum Oxide, Vitrified Bond, Salmon Color 1/2" RD. x 6 1/16 x 1/4 x 6 Stone Grit Size 100 120 150 180 220 320 400 500 600 1/16 x 1/2 x 6 1/8 x 1/4 x 6 1/16 x 1/4 x 6 1/8 x 1/2 x 6 All sizes in all grits 1/16 x 1/2 x 6 1/8 x 1 x 6 1/8 x 1/8 x 6 available 3/16 x 1/2 x 6 1/8 x 1/4 x 6 1/4 x 1/4 x 6 1/8 x 1/2 x 6 All sizes in all grits 1/4 x 1/2 x 6 3/16 Sq. x 6 available 1/4 x 1 x 6 1/4 x 1/4 x 6 3/8 x 3/8 x 6 1/4 x 1/2 x 6 1/2 x 1/2 x 6 3/8 x 3/8 x 6 3/4 x 3/4 x 6 1 x 1 x 6 1 x 1 x 6 1/4 Rd. x 6

All are custom made and have no UPC code numbers Rounds are considered specials and may require long lead time.

Hard Moldmakers Stones Hard Silicon Carbide Vitrified, Green, Gray, Black

Stone Grit Size 46 60 80 100 150 220 320 400 500 600 1/16 x 1/4 x 6 Superfine Stones 1/16 x 1/2 x 6 Calcined Alumina, Soft Bond 6" Only 900 1/8 x 1/4 x 6 Grit, White In Color 1/8 x 1/2 x 6 1/8 x 1 x 6 Stone Size Price Each 1/4 x 1/4 x 6 All sizes in all grits 1/8 x 1/4 x 6 1/4 x 1/2 x 6 1/4 x 1/4 x 6 1/4 x 1 x 6 available 1/8 x 1/2 x 6 3/8 x 3/8 x 6 1/4 x 1/2 x 6 1/2 x 1/2 x 6 1/2 x 1/2 x 6 3/4 x 3/4 x 6 1 x 1 x 6

Quantity Discount 1-11 Each Net 1-4 Doz. 10% 5-9 Doz. 15% 10 Doz. + 30%

21 17612_Sticks_P21_30 7/20/05 10:02 AM Page 22

Resin Bonded Stones Hard Polishing Stones Regular A/O, Hard Bond, Dark Brown Color Preminum Aluminum Oxide, Vit. Oil Treated, Cream

Stone Grit Stone Grit Size 80 120 180 220 320 400 600 Size 100 150 220 320 400 500 600 1/16 x 1/4 x 6 1/16 x 1/4 x 6 1/16 x 1/2 x 6 1/16 x 1/2 x 6 1/8 x 1/8 x 6 All sizes in all grits 1/8 x 1/4 x 6 1/8 x 1/4 x 6 1/8 x 1/2 x 6 available 1/8 x 1/2 x 6 1/8 x 1 x 6 3/16 Sq. x 6 1/4 x 1/4 x 6 All sizes in all grits available 1/4 x 1/4 x 6 1/4 x 1/2 x 6 1/4 x 1/2 x 6 1/4 x 1 x 6 3/8 x 3/8 x 6 1/2 x 1/2 x 6 1/2 x 1 x 6 1 x 1 x 6

General Polishing Stones Ruby Stones Semi Hard, A/O, Vitrified, Wax Treat, Off White Color Fast Cutting A/O, Pink Color

Stone Grit Stone Grit Size 100 150 220 320 400 500 600 800 900 1000 Size 46 60 80 100 150 220 1/16 x 1/4 x 6 1/8 x 1/4 x 6 1/16 x 1/2 x 6 1/8 x 1/2 x 6 1/8 x 1/4 x 6 3/16 Sq. x 6 1/8 x 1/2 x 6 1/4 x 1/4 x 6 1/8 x 1 x 6 1/4 x 1/2 x 6 All sizes in all 1/4 x 1/4 x 6 All sizes in all grits 1/4 x 1 x 6 1/4 x 1/2 x 6 3/8 x 3/8 x 6 grits available available 1/4 x 1 x 6 1/2 x 1/2 x 6 3/8 x 3/8 x 6 1/2 x 1 x 6 1/2 x 1/2 x 6 1 x 1 x 6 1/2 x 1 x 6 1 x 2 x 6 1 x 1 x 6 1 x 2 x 8

Quantity Discount 1-11 Each Net 1-4 Doz. 10% 5-9 Doz. 15% 10 Doz. + 30%

Distributor discount is calculated only after quantity discount is taken Rounds are considered specials and may require long lead time. We stock many rounds in a variety of sizes and specifications, Please contact us for availability of rounds you require.

22 17612_Sticks_P21_30 7/20/05 10:02 AM Page 23

Metal Polishing & Cleaning

Rubber Bond Sticks

Stone Size Length Grit Sizes Hardness Available Shapes 1/4" To 6" 54 Thru 220 Soft, Firm, Hard Round, Triangle, Square 3/8", 1/2", 5/8" To 8" 54 Thru 220 Soft, Firm, Hard Round, Triangle, Square 3/4" & 1" To 12" 54 Thru 220 Soft, Firm, Hard Round, Triangle, Square

Rubber Bond Polishing Pieces

Bias Cut Rectangular Blocks Thickness Width Length Thickness Width Length 1/4" 1" 2" 1/4" To 12" To 12" 3/8" 1-1/8" 2-1/4" 3/8" To 12" To 12" 1/2" 1-1/8" 2-3/4" 1/2" To 12" To 12" 3/4" 2" 3-1/4" 3/4" To 12" To 12"

Cotton Fiber Reinforced Resin Sticks

Cross Section Length Grit Sizes Hardness Available Shapes 1/4" To 8" 54 Thru 320 F Thru K Round, Triangle, Square 3/8", 1/2", 5/8" To 8" 54 Thru 320 F Thru K Round, Triangle, Square 3/4" & 1" To 12" 54 Thru 320 F Thru K Round, Triangle, Square

Honing Oils

S&S Honing Oils are specially compounded for ferrous and non ferrous honing to: 1. Dissipate heat from the workpiece. 3. Flush bore free of honing swarf 2. Lubricate stones in contact with bore. 4. Maintain clean free cutting conditions S&S-230 Honing Oil A petroleum-based sulphurized honing oil recommended for precision honing of ferrous metals and alloys used for all steel, cast iron carbide, aluminum, bronze and ceramics. Used with all types of honing equipment. S&S-230-5 ...... 5 Gallon Pail S&S-230-55 ...... 55 Gallon Drum (nonreturnable) S&S-130 Honing Oil A heavy duty non-chlorinated honing oil for use for ferrous and non-ferrous metals. Excellent for external as well as internal applications. Excellent for Superior type and Tennessee type two stone honing Systems. S&S-130-5 ...... 5 Gallon Pail S&S-130-55 ...... 55 Gallon Drum (nonreturnable)

23 17612_Sticks_P21_30 7/20/05 10:02 AM Page 24

Convert your standard drill press into a hone in seconds with the: MD-1 Mandrel Driver The MD-1 is the answer to all non-production honing in any shop. Converts any drill press into a hone with the flip of a wrist, no tools necessary. Available with #2, 3, or 4 Morse Taper, straight or special shanks available. Will drive all standard two stone honing mandrels in 1/8" through 3". Included in all honing kits shown below.

DK-500 1/8" to 1/2" inclusive, consisting of: 1-DK-50 Mandrel Case 7 Mandrels 1/8" to 1/2" 7 Sets of Stones Shipping Weight: 12 lbs.

TRK-1000 3/16" to 1" inclusive, consisting of: 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 1-MD-100 Mandrel Case 13 Mandrels 3/16" to 1" inclusive 13 Sets Roughing Stones 13 Sets Semi-finishing Stones Shipping Weight: 39 lbs.

TRK-1500 3/16" to 1-1/2" inclusive, consisting of: 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 1-MD-150 Mandrel Case 17 Mandrels 3/16" to 1-1/2" inclusive 17 Sets Roughing Stones TRK-2500 17 Sets Semi-finishing Stones 3/16" to 2-1/2" inclusive, consisting of: Shipping Weight: 80 lbs. 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 1-MD-150 Mandrel Case TRK-2000 1-MD-250 Mandrel Case 3/16" to 2" inclusive, consisting of: 25 Mandrels 3/16" to 2-1/2" inclusive 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper 25 Sets Roughing Stones 1-MD-100 Mandrel Case 25 Sets Semi-finishing Stones 1-MD-200 Mandrel Case Shipping Weight: 120 lbs. 21 Mandrels 3/16" to 2" inclusive 21 Sets Roughing Stones 21 Sets Semi-finishing Stones TRK-3000 Shipping Weight: 108 lbs. 3/16" to 3" inclusive, consisting of: 1-MD-1 Mandrel Driver No. 2, 3, or 4 Morse Taper TRK-2001 1-MD-100 Mandrel Case 1-1/8" to 2" inclusive, consisting of: 1-MD-200 Mandrel Case 1-MD-201 Mandrel Case 1-MD-300 Mandrel Case 6 Mandrels 1-1/8" to 2" inclusive 29 Mandrels 3/16" to 3" inclusive 8 Sets Roughing Stones 29 Sets Roughing Stones 8 Sets Semi-finishing Stones 29 Sets Semi-finishing Stones Shipping Weight: 35 lbs. Shipping Weight: 140 lbs.

24 17612_Sticks_P21_30 7/20/05 10:02 AM Page 25

Convert your Sunnen hone into a two stone honing machine with the W-1000 Adapter

The W-1000 converts a Sunnen machine to accept any brand of two stone mandrels rather than a single stone which Sunnen uses. In addition, Sunnen supplies a tiny abrasive stone along with a great number of other parts to comprise one mandrel assembly. All brands of two stone mandrel assemblies are made up of only two parts, the mandrel and two massive stones. See comparisons below.

Example: To hone a 1-3/8" bore 10" long, you would require the following parts to do the job with a Sunnen hone: 1-3G-P28-1375WC Mandrel 3-P28 Stones 1-3G-P28 Tension Block 1-3G-P28 Wedge 1-3G-P28 Retainer Block 3-WC-D Guide Shoes

To hone the same bore with a two stone mandrel, all you would require is: 1-1-3/8" Mandrel 1-Set 1-3/8" Stones

¥ Instant set up Ð without tools ¥ Huge abrasive hones to do the work with extreme long life of honing stones ¥ Only abrasives in contact with bore being honed, no metal contact with part ¥ Parts with keymaps or ports are easily honed without special honing stones ¥ No loose parts to wear out or lose, only the mandrel and stone set

25 17612_Sticks_P21_30 7/20/05 10:02 AM Page 26

Superior Ð Tennessee Two Stone Hones Shop Guide

26 17612_Sticks_P21_30 7/20/05 10:02 AM Page 27

Sunnen-Superior Ð Tennessee Hone

27 17612_Sticks_P21_30 7/20/05 10:02 AM Page 28

Norton Diamond Hand Hones

Resinoid Diamond Hand Hones

UPC Code # UPC Code # Size, Type and Specification Size, Type and Specification 730006 730006 ¥ 1/4 x 3/8 x 4 ASD220-R100B99-1/16 02240 1/4 x 3/8 x 4 ASD220/400-R100B99-1/16 One Insert 1/16 x 1 x 3/8 One End Two Inserts 1/16 x 1 x 3/8 On Each End The above are the two most common diamond hand hones used. We can supply specials.

For ASI-218, Sunnen & Superior Recommended Stone Sets

28 17612_Sticks_P21_30 7/20/05 10:02 AM Page 29

Portable Hone Kits ASI General Purpose Shop Hones

UPC Code Model 01950 ASI-B 3/4" To 1-1/4" UPC Code Replacement Stone Sets For ASI-B #730006 (3 per set) Stone Range 01911 A1B 3/4" To 1" The smallest of the ASI portable kits, yet as 01912 A2B 1" To 1-1/4" complete as its’ big brother. To do a variety of jobs in the 3/4" To 1-1/4" range. The kit contains the hone body, AB-121 drive shaft and a set of A1B and A2B stones.

UPC Code Model 01951 ASI-C 1" To 2" UPC Code Replacement Stone Sets For ASI-C #730006 (3 per set) Stone Range 01913 A1CD 1" To 1-1/4" 01914 A2CD 1-1/4"" To 1-1/2" This kit, same as the B & D kit, comes complete, 01915 A3CD 1-1/2" To 1-3/4" ready to go to work. It includes the hone body 01916 A4CD 1-3/4" To 2" and the drive shaft, with four general purpose stone sets, A1CD, A2CD, A3CD and A4CD.

UPC Code Model UPC Code Replacement Stone Sets For ASI-D 01952 ASI-D #730006 (3 per set) 1-1/2" To 2-1/2" Stone Range 01913 A1CD 1-1/2" To 1-3/4" 01914 A2CD 1-3/4" To 2" 01915 A3CD 2" To 2-1/4" The contents of this kit are exactly like the C kit, 01916 A4CD 2-1/4" To 2-1/2" except the honing body which is larger. If 01917 * A5CD 2-1/2" To 2-3/4" required, an A5CD and A6CD stone set is avail- able on special order to extend the range to a 01918 * A6CD 2-3/4" To 3" full 3" capacity. * Available on special order

BCD-Hone Kit The BCD-Hone Kit includes one each of the ASI- B, ASI-C and ASI-D kits shown above. The range of this kit is 3/4" through 2-1/2", with available oversize hones, A5CD and A6CD to expand the range to 3" if desired.

All kits and replacement stones on this page are available from stock for immediate delivery.

29 17612_Sticks_P21_30 7/20/05 10:02 AM Page 30

Portable Honing Devices Small Bore Honing Devices Ð 1/2" Through 3-1/2"

Used in small engine repair, brake and engine cylinder work & glaze breaking and deburring. ¥ Smallest I.D. hone available in industry ¥ Flexible shaft ¥ For thru or blind hole work ¥ Use in any drill motor or drill press ¥ Fully adjustable cutting tension ¥ Two grit sizes available from our stock ¥ Custom stones available in any grit size required for the job

S&S-Mini Standard Stone 1-1/8" Long

UPC Code #730006 Size Size Capacity 02001 S&S-Mini Hone 1/2" Through 2-1/4" Bores 02027 S&S-Mini-F 1-1/8" Long , Fine Grit Replacement Stone (2 per set) 02028 S&S-Mini-M 1-1/8" Long , Medium Grit Replacement Stone (2 per set)

S&S-Junior Standard Stone 1-1/8" Long

UPC Code #730006 Size Size Capacity 02000 S&S-Junior 3/4" Through 2-1/2" Bores 02024 S&S-3/4-F 3/4" Long , Fine Grit Replacement Stones (3 per set) 02025 S&S-3/4-M 3/4" Long , Medium Grit Replacement Stones (3 per set) 02026 S&S-3/4-C 3/4" Long , Coarse Grit Replacement Stones (3 per set) 02018 S&S-1-1/8-F 1-1/8" Long , Fine Grit Replacement Stones (3 per set) 02019 S&S-1-1/8-M 1-1/8" Long , Medium Grit Replacement Stones (3 per set) 02020 S&S-1-1/8-C 1-1/8" Long , Coarse Grit Replacement Stones (3 per set)

S&S-Middle Standard Stone 2" Long

UPC Code #730006 Size Size Capacity 02003 S&S-Middle 1-1/4" Through 3-1/2" Bores 02018 S&S-1-1/8-F 1-1/8" Long , Fine Grit Replacement Stones (3 per set) 02019 S&S-1-1/8-M 1-1/8" Long , Medium Grit Replacement Stones (3 per set) 02020 S&S-1-1/8-C 1-1/8" Long , Coarse Grit Replacement Stones (3 per set) 02021 S&S-2-F 2" Long , Fine Grit Replacement Stones (3 per set) 02022 S&S-2-M 2" Long , Medium Grit Replacement Stones (3 per set) 02023 S&S-2-C 2" Long , Coarse Grit Replacement Stones (3 per set)

30 17612_Sticks_P31_40 7/20/05 10:09 AM Page 31

Portable Honing Devices Medium And Large Bore Honing Devices 2" Through 10"

Used in all types of bore refinishing, hydraulic cylinders, engine cylinders and any I.D. pipe or tubing which requires a honed finish. Excellent for deburring work in all kinds of machine shop applications. Precision sizing is available with knurled thumb screw adjustment.

Model S&S-Jumbo Capacity 2" Through 7"

Available With Standard Stones In 3" Or 4"

UPC Code #730006 Model Size Capacity 02006 S&S-Jumbo-3 2" Through 7" 01999 S&S-Jumbo-4 2" Through 7" 02012 S&S-3-F 3" Long Fine Replacement Stone 3/Set 02013 S&S-3-M 3" Long Medium Replacement Stone 3/Set 02014 S&S-3-C 3" Long Coarse Replacement Stone 3/Set 02015 S&S-4-F 4" Long Fine Replacement Stone 3/Set 02016 S&S-4-M 4" Long Medium Replacement Stone 3/Set 02017 S&S-4-C 4" Long Coarse Replacement Stone 3/Set

Both of the hones on this page are adjustable to pro- vide constant pressure on the bore wall and to com- pensate for the hone stone wear.

Model S&S-Maxi-Jumbo Capacity 6" Through 10"

Standard Stone Is 4" Long

UPC Code #730006 Model Size Capacity 02005 S&S-Maxi-Jumbo 6" Through 10" 02012 S&S-3-F 3" Long Fine Replacement Stone 3/Set 02013 S&S-3-M 3" Long Medium Replacement Stone 3/Set 02014 S&S-3-C 3" Long Coarse Replacement Stone 3/Set 02015 S&S-4-F 4" Long Fine Replacement Stone 3/Set 02016 S&S-4-M 4" Long Medium Replacement Stone 3/Set 02017 S&S-4-C 4" Long Coarse Replacement Stone 3/Set

31 17612_Sticks_P31_40 7/20/05 10:09 AM Page 32

Hand Feed Portable Hone ASI-218

Ideal for occasional heavy duty portable honing. Range 3" Through 21"

RangeUPC Code Single Stone UPC Code Double Stone UPC Code Holder Diameter#730006 Master Holder #730006 Master Holder #730006 Support Box In Inches 4 Per Set 4 Per Set Part Number 3 - 4-3/4 01922 ASI-400 ÐÐ ÐÐ 3-3/4 - 6-1/2 01923 ASI-500 ÐÐ ÐÐ 6 - 9 01924 ASI-600 01932 ASI-569 01940 ASI-A62 8 -12 01925 ASI-700 01933 ASI-578 01941 ASI-A82 11 - 15 01926 ASI-800 01934 ASI-588 01942 ASI-A92 14 - 18 01927 ASI-900 01935 ASI-598 01943 ASI-A43 17 - 21 ASI-140 ASI-541 ASI-A54

ASI-Portable Hone Accessories

Replacement Stone Sets 2-Stone And 2-Felt Wipers

UPC Code Part Grit For Use On UPC Code Part Grit For Use On #730006 Number Size Material #730006 Number Size Material 01976 ASI-1 C80 Coarse Cast Iron ¥ ASI-8 A150 Med. HD. Sleeves 01977 ASI-2 C150 Med. Cast Iron ¥ ASI-9 A220 Med/Fn HD. Sleeves 01979 ASI-3 C280 Fine Cast Iron ¥ ASI-10 A280 Fine HD. Sleeves 01980 ASI-4 C400 Ex/Fn Cast Iron ¥ ASI-11 A80 Coarse Steel 01978 ASI-5 C220 Med/Fn Cast Iron ¥ ASI-12 A150 Med. Steel ¥ ASI-6 C600 Sup/Fn All Metals ¥ ASI-13 A220 Med/Fn Steel ¥ ASI-7 A80 Coarse HD. Sleeves ¥ ASI-14 A280 FIne Steel

4-Stone Sets

UPC Code Part Grit For Use On UPC Code Part Grit For Use On #730006 Number Size Material #730006 Number Size Material 01981 ASI-1S C80 Coarse Cast Iron ¥ ASI-8S A150 Med. HD. Sleeves 01982 ASI-2S C150 Med. Cast Iron ¥ ASI-9S A220 Med/Fn HD. Sleeves 01984 ASI-3S C280 Fine Cast Iron ¥ ASI-10S A280 Fine HD. Sleeves 01985 ASI-4S C400 Ex/Fn Cast Iron ¥ ASI-11S A80 Coarse Steel 01983 ASI-5S C220 Med/Fn Cast Iron ¥ ASI-12S A150 Med. Steel ¥ ASI-6S C600 Sup/Fn All Metals ¥ ASI-13S A220 Med/Fn Steel ¥ ASI-7S A80 Coarse HD. Sleeves ¥ ASI-14S A280 FIne Steel

32 17612_Sticks_P31_40 7/20/05 10:09 AM Page 33

Portable Honing Kits

UPC Code Model 01954 ASI-218 Kit

Contents: ¥ Honing body with yoke and pinion drive shaft. ¥ One set ASI-400 stone holders. ¥ One set ASI-5 stones and felts. Range Ð 3" to 5"

The ASI body and drive shaft are included in all honing kits. In the ASI-218 kit above, you get one set of stones and a set of stone holders.

UPC Code Model 01956 “E” Kit

Contents: ¥ Honing body with yoke and pinion drive shaft. ¥ Two sizes of stone holder sets. ¥ Six sets of honing stones. ¥ Metal storage box Range Ð 3" to 6-1/2"

The above kit may be expanded to a capacity of 9" by the simple addition of an extra set of stone hold- ers, ASI-600 and a holder support box ASI-A62. It is also possible to increase capacity to 12" in the same manner, both at a nominal cost.

UPC Code Model 01957 “F” Kit Contents: ¥ Honing body with yoke and pinion drive shaft. ¥ Five sizes of stone holder sets. ¥ Three sizes of holder support boxes. ¥ Six sets of honing stones. ¥ Metal storage box Range Ð 3" to 15"

This kit may be expanded to 21" if required. Simply add the extra oversize stone holder sets and the appropriate support boxes to whatever size is desired. Above 15" with any individual tool or kit is recommended only with two stone master holders. All accessory items to expand capacity of any device are found on the previous page.

33 17612_Sticks_P31_40 7/20/05 10:10 AM Page 34

Alignerª Guided Sharpening Kits

UPC Model Grit Code # Size 07250 AKEF X-FINE & FINE 07251 AKFC FINE & COARSE

Diamond Whetstonesª - Bench Models

UPC Model Grit Diamond Code # Size Area 07216 W6FS FINE 6" x 2" 07217 W6CS COARSE 6" x 2" 07220 W6FP FINE 6" x 2" 07221 W6CPS COARSE 6" x 2" 07224 W8F FINE 8" x 2-5/8" 07225 W8C COARSE 8" x 2-5/8"

Pocket Models UPC Model Grit Diamond Code # Size Area 07103 W3C* COARSE 3-1/3" x 7/8" 07106 W4F FINE 4-1/3" x 7/8" 07107 W4C COARSE 4-1/3" x 7/8"

Diafoldª Diamond Whetstoneª

UPC Model Grit Diamond Code # Size Area 07151 FWF FINE 4-1/3" x 7/8" 07152 FWC COARSE 4-1/3" x 7/8" 07157 FMF FINE 4-1/3" x 7/8" 07158 FMC COARSE 4-1/3" x 7/8"

Diafoldª Sharpeners & Diafoldª Folding Files

UPC Model Grit Diamond Code # Size Area 07159 FSKF FINE SERRATED 07160 FSKC COARSE SERRATED 07161 FFF FINE 4" LONG TAPER 07162 FFC COARSE 4" LONG TAPER 07166 FRF* FINE 1/4 ROUND ROD 07167 FRC* COARSE 1/4 ROUND ROD 07168 FHRF FINE 1/4 HALF RD.

Diamond Mini-Sharpª Sharpener

UPC Model Grit Diamond Code # Size Area 07180 F70E X-FINE 2-11/16 x 15/16 07181 F70F FINE 2-11/16 x 15/16 07182 F70C COARSE 2-11/16 x 15/16 07183 F70X X-COARSE 2-11/16 x 15/16 * Limited Quantities on items W3C, FRF and FRC 34 17612_Sticks_P31_40 7/20/05 10:10 AM Page 35

General Purpose Diamond Dressing Tools

UPC Code # Tool Type & NumberDiamond Section Shank Shank Length 730006 Multi-Point Nibs Size Shape Diameter Under Head

S&S-60

02250 1A 7/16" 3/4"

S&S-61

02252 1A 7/16" 7/8"

S&S-62

02253 2A 7/16" 7/8"

S&S-63

02254 2A 7/16" 3/4"

S&S-64

02256 1R 7/16" 1-1/2"

S&S-65

02258 2R 7/16" 1-1/2"

Single Point Tools

UPC Code # Tool Type & Number Carat Shank Shank 730006 Multi-Point Nibs Weight Diameter Length 02260 S&S-2-3 1/4 (.25) 3/8" 2" 02261 S&S-2 1/4 (.25) 7/16" 2" 02262 S&S-3-3 1/3 (.33) 3/8" 2" 02263 S&S-3 1/3 (.33) 7/16" 2" 02264 S&S-5-3 1/2 (.50) 3/8" 2" 02265 S&S-5 1/2 (.50) 7/16" 2" 02267 S&S-7 3/4 (.75) 7/16" 2" 02269 S&S-10 1 (1.00) 7/16" 2" Phono Point Tools Included Angle 02270 S&S-PP-60 60û 1/8" 1" 02271 S&S-PP-75 75û 1/8" 1" 02272 S&S-PP-90 90û 1/8" 1" 02273 S&S-RD For Dressing 3/8" 2" Radii of .015" Radius Tool Through .025" 02280 S&S-HD Diamond Tool Holder 1-1/2" hollow shaft holder, for offhand truing and dressing using any tool with shank length from 3/4" to 9". The collett accepts only 7/16" diameter shank.

35 17612_Sticks_P31_40 7/20/05 10:10 AM Page 36

Flex-Hone¨ Tool Brake Cylinders, Hydraulics & Valve Block Cylinders or Liners Guides Heavy-duty Flex Hones 3" thru 4-1/2" dia. are 13-1/2" OAL Bal. 17-1/2" OAL 8" OAL

Part Number 120SC 180SC 240SC 320SC Part Number For Bore Sizes 120SC 180SC 240SC BC 5 mm (.197) ¥ 02045 ¥ 02046 GBD 3" (76 mm) 3" to 2-3/4" ¥ ¥ ¥ BC 5.5 mm (.217) ¥ 02043 ¥ ¥ GBD 3-1/4" (83 mm) 3-1/4" to 3" ¥ ¥ ¥ BC 6.4 mm (.250) ¥ 02047 ¥ ¥ GBD 3-1/2" (89 mm) 3-1/2" to 3" ¥ ¥ ¥ BC 7 mm (.276) ¥ 02048 ¥ ¥ GBD 3-3/4" (95 mm) 3-3/4" to 3-1/4" ¥ ¥ ¥ BC 8 mm (.315) ¥ 02051 02052 ¥ GBD 4" (101 mm) 4" to 3-1/2" ¥ ¥ ¥ BC 9 mm (.354) ¥ 02049 ¥ ¥ GBD 4-1/4" (108 mm) 4-1/4" to 3-3/4" ¥ ¥ ¥ BC 9.5 mm (.375) ¥ 02050 ¥ ¥ GBD 4-1/2" (114 mm) 4-1/2" to 4" ¥ ¥ ¥ BC 10 mm (.394) ¥ 02053 ¥ ¥ GBD 5" (127 mm) 5" to 4-1/2" ¥ ¥ ¥ BC 11 mm (.433) ¥ 02044 ¥ ¥ GBD 5-1/2" (140 mm) 5-1/2" to 5" ¥ ¥ ¥ BC 12 mm (.472) ¥ 02055 ¥ ¥ GBD 6" (152 mm) 6" to 5-1/2" ¥ ¥ ¥ BC 1/2" (12.7 mm) 02057 20256 ¥ 02058 GBD 6-1/2" (165 mm) 6-1/2" to 6 ¥ ¥ ¥ BC 14 mm (.552) ¥ 02054 ¥ ¥ GBD 7" (178 mm) 7" to 6-1/2" ¥ ¥ ¥ BC 5/8" (16 mm) ¥ 02062 ¥ ¥ GBD 7-1/2" (190 mm) 7-1/2" to 7" ¥ ¥ ¥ BC 18 mm (.709) ¥ 02059 ¥ ¥ GBD 8" (203 mm) 8" to 7-1/2" ¥ ¥ ¥ BC 3/4" (19 mm) ¥ 02064 ¥ 02068 ¥ = No UPC Code Assigned BC 20 mm (.787) ¥ 02060 ¥ ¥ BC 7/8" (22 mm) ¥ 02066 02067 ¥ BC 1" (25.4 mm) 02072 02070 ¥ ¥ BC 1-1/8" (29 mm) ¥ 02077 02079 02078 BC 1-1/4" (31.8 mm) ¥ 02080 02081 ¥ Heavy Duty Hex Shaft BC 1-3/8" (35 mm) ¥ 02082 ¥ ¥ 34" OAL BC 1-1/2" (38 mm) ¥ 02084 ¥ ¥ BC 1-5/8" (41 mm) ¥ 02088 ¥ ¥ Part Number BC 1-3/4" (45 mm) ¥ 02086 ¥ ¥ 3" Core (1/2" Hex-Shaft) 120SC 180SC 240SC BC 2" (51 mm) ¥ 02090 ¥ ¥ BC 2-1/4" (57 mm) ¥ 02073 ¥ ¥ GBDH 8" (203 mm) ¥ ¥ ¥ BC 2-1/2" (64 mm) ¥ 02098 ¥ ¥ GBD 8-1/2" (216 mm) ¥ ¥ ¥ BC 2-3/4" (70 mm) ¥ 02100 ¥ ¥ GBD 9" (228 mm) ¥ ¥ ¥ BC 3" (76 mm) ¥ 02102 ¥ ¥ GBD 9-1/2" (241 mm) ¥ ¥ ¥ GBD 10" (254 mm) ¥ ¥ ¥ Disc Brakes 5" OAL 4" Core (1/2" Hex-Shaft) 120SC 180SC 240SC GBD 10-1/2" (267 mm) ¥ ¥ ¥ Part Number 120SC 180SC 240SC GBD 11" (280 mm) ¥ ¥ ¥ DBC 1-1/2" (38 mm) ¥ ¥ ¥ GBD 11-1/2" (292 mm) ¥ ¥ ¥ DBC 1-3/4" (48 mm) ¥ ¥ ¥ GBD 12" (305 mm) ¥ ¥ ¥ DBC 2-1/8" (54 mm) ¥ 02094 ¥ 5" Core (5/8" Hex-Shaft) 120SC 180SC 240SC DBC 2-1/2" (64 mm) ¥ 02096 ¥ DBC 2-3/4" (70 mm) ¥ ¥ ¥ GBD 12-1/2" (318 mm) ¥ ¥ ¥ DBC 3-1/8" (79 mm) ¥ ¥ ¥ GBD 13" (330 mm) ¥ ¥ ¥ GBD 13-1/2" (344 mm) ¥ ¥ ¥ Engine Block Cylinders GBD 14" (355 mm) ¥ ¥ ¥ 13-1/2" OAL 6" Core (5/8" Hex-Shaft) 120SC 180SC 240SC Part Number 120SC 180SC 240SC 320SC GBD 15" (381 mm) ¥ ¥ ¥ GB 3-1/4" (83 mm) ¥ 02103 ¥ ¥ GBD 16" (406 mm) ¥ ¥ ¥ GB 3-1/2" (89 mm) ¥ 02099 ¥ ¥ GB 3-3/4" (95 mm) ¥ ¥ ¥ ¥ 8" Core (5/8" Hex-Shaft) 120SC 180SC 240SC GB 4-1/8" (105 mm) ¥ ¥ ¥ ¥ GBD 17" (432 mm) ¥ ¥ ¥ GB 4-5/8" (118 mm) ¥ ¥ ¥ ¥ GBD 18" (457 mm) ¥ ¥ ¥

36 17612_Sticks_P31_40 7/20/05 10:10 AM Page 37

Flex-Hone¨ Tool Extra Heavy Duty ¨ Shafts 3/4" - 1-1/4" Flex-Hone Tool Accessories

No. of Pipe Nipple Adapters Drum Sections Shaft Pipe Size Flex-Hone Sizes Part Number Dia. Section on Drum Dia. 832A 8-32 Adapters 7mm-1/2" GBDX 19" (483mm) 11-1/2" A 22 3/4" 18NPT 1/8" NPT 5/8"-3" GBDX 20" (508mm) 11-1/2" B 22 3/4" 14NPT 1/4" NPT 3"-5-1/2" GBDX 21" (533mm) 11-1/2" C 22 3/4" 38NPT 3/8" NPT 6"-8" GBDX 22" (559mm) 11-1/2" D 22 3/4" 12NPT 1/2" NPT 6"-12" GBDX 23" (584mm) 15-1/2" A 29 3/4" Extensions for use with pipe nipple adapters GBDX 24" (610mm) 15-1/2" B 29 3/4" 18 x 18 1/8" NPT x 18" w/coupling GBDX 25" (635mm) 15-1/2" C 29 3/4" 18 x 36 1/8" NPT x 36" w/coupling GBDX 26" (660mm) 15-1/2" D 29 3/4" 14 x 18 1/4" NPT x 18" w/coupling GBDX 27" (686mm) 19-1/2" A 36 1" 14 x 36 1/4" NPT x 36" w/coupling GBDX 28" (711mm) 19-1/2" B 36 1" Flex-Shaft GBDX 29" (737mm) 19-1/2" C 36 1" for in chassis-engine on 3" to 45/8" FH diameters GBDX 30" (762mm) 19-1/2" D 36 1" FS 14" OAL 6û Max Bend GBDX 31" (787mm) 19-1/2" E 36 1" GBDX 32" (813mm) 24-1/2" A 44 1-1/4" GBDX 33" (838mm) 24-1/2" B 44 1-1/4" GBDX 34" (864mm) 24-1/2" C 44 1-1/4" GBDX 35" (889mm) 24-1/2" D 44 1-1/4" GBDX 36" (914mm) 24-1/2" E 44 1-1/4" GBDX-A Section - 4-1/8" (105mm) Overall Trim GBDX-B Section - 4-5/8" (118mm) Overall Trim GBDX Replacement Sections Available GBDX-C Section - 5-1/4" (133mm) Overall Trim GBDX-D Section - 5-3/4" (146mm) Overall Trim for Above GBDX Flex-Hone¨ Tools GBDX-E Section - 6-3/8" (162mm) Overall Trim

Stem Marking Ð Type of Abrasive Instructions For Use

SC –Silicon Carbide ...... no color The Flex-Hone Tool should be rotating upon entry and removal from (Recommended for ferrous metals) cylinder. RPM from 1200 to 60 depending on diameter. Stroke from 30 AO – Aluminum Oxide ...... black to 200 per minute depending upon RPM. Average 350-500 RPM at 60- BC – Boron Carbide ...... gold 120 strokes. Final stroking may be accelerated to develop 45˚ cross hatch. OEM high production needs experimentation with different min- WC – Tungsten Carbide ...... tan eral or water-soluble honing oils for optimum results. For convenience Levigated Alumina (super fine) ...... green use a 10-30 wt. motor oil or our FlexHone Oil. Wash cylinder prefer- Z Grain – Zirconia Alumina ...... red ably with water, brush and detergent, then dry and oil. Experiment honing time from 10 to 45 seconds just sufficient to develop plateaued finish free from cut, torn and folded metal. Do not overhone. End Marking Ð Grit Size Ask for Honing Booklets availble at no charge.

20 (brown) 120 (silver or no color) 320 (white) 40 (purple) 180 (cardinal red) 400 (yellow) 60 (grey) 240 (navy blue) 600 (pink) 80 (orange) 800 (light blue) Abrasive Options Grit Types 20 40 60 80 120 180 240 320 SC = Silicon Carbide X X X X Standard Grits AO = Aluminum Oxide X X X X X X X X BC = Boron Carbide X X X X X X X X WC = Tungsten Carbide X X X X X X X X (100% or 50/50) Z = Alumina Zirconia X X X X X X (25 Z & 75 A) Finer Grits May Be Available On Request

37 17612_Sticks_P31_40 7/20/05 10:10 AM Page 38

S&S Finishing Stick

The most innovative tool from the abrasive industry in forty years.

All tools and abrasive belts are color coded for instant identification of tool and abrasive belt grit size. Tool is available in three sizes.

1/4" x 6" Tools 1/2" x 8" Tools 3/4" x 10" Tools UPC Code # Size, Color & UPC Code # Size, Color & UPC Code # Size, Color & 73006 Grit Size 73006 Grit Size 73006 Grit Size 02500 1/4" BROWN 40 Grit 02600 1/2" BROWN 40 Grit 02700 3/4" BROWN 40 Grit 02501 1/4" GRAY 80 Grit 02601 1/2" GRAY 80 Grit 02701 3/4" GRAY 80 Grit 02502 1/4" RED 120 Grit 02602 1/2" RED 120 Grit 02702 3/4" RED 120 Grit 02503 1/4" BLUE 240 Grit 02603 1/2" BLUE 240 Grit 02703 3/4" BLUE 240 Grit 02504 1/4" GREEN 320 Grit 02604 1/2" GREEN 320 Grit 02704 3/4" GREEN 320 Grit 02505 1/4" YELLOW 400 Grit 02605 1/2" YELLOW 400 Grit 02705 3/4" YELLOW 400 Grit 02506 1/4" BLACK 600 Grit 02606 1/2" BLACK 600 Grit 02706 3/4" BLACK 600 Grit

Replacement Belts UPC Code # Belt & UPC Code # Belt & UPC Code # Belt & 73006 Grit Size 73006 Grit Size 73006 Grit Size 02510 1/4" 40 Grit 02610 1/2" 40 Grit 02710 3/4" 40 Grit 02511 1/4" 80 Grit 02611 1/2" 80 Grit 02711 3/4" 80 Grit 02512 1/4" 120 Grit 02612 1/2" 120 Grit 02712 3/4" 120 Grit 02513 1/4" 240 Grit 02613 1/2" 240 Grit 02713 3/4" 240 Grit 02514 1/4" 320 Grit 02614 1/2" 320 Grit 02714 3/4" 320 Grit 02515 1/4" 400 Grit 02615 1/2" 400 Grit 02715 3/4" 400 Grit 02516 1/4" 600 Grit 02616 1/2" 600 Grit 02716 3/4" 600 Grit

38 17612_Sticks_P31_40 7/20/05 10:10 AM Page 39

Norton Pacesetter Mounted Points

A Shapes The standard shank size is 1/8", 1/4" x 1-1/2" and 3/8 x 2". All coarse (CRS) grits are hard grade. All medium (M) and medium/tine (M/F) grits are medium grade.

UPC Code # Speed* Shape Size Spec Spindle 730006 RPM 04000 A1 3/4 x 2-1/2 38A CRS 1/4 19,800 04001 A1 3/4 x 2-1/2 38A M 1/4 19,800 A1 A2 A3 04005 A2 1 x 1-1/4 38A M 1/4 38,200 04006 A3 1 x 2-3/4 38A CRS 1/4 16,100 04007 A3 1 x 2-3/4 38A M 1/4 16,100 04010 A4 1-1/4 x 1-1/4 38A CRS 1/4 30,560 A4 A5 A6 04011 A4 1-1/4 x 1-1/4 38A M 1/4 30,560 04015 A5 3/4 x 1-1/8 38A CRS 1/4 45,000 04016 A5 3/4 x 1-1/8 38A M 1/4 45,000 04020 A6 3/4 x 1-1/8 38A M 1/4 39,000 04025 A11 7/8 x 2 38A CRS 1/4 19,860 A1 A12 A13 04026 A11 7/8 x 2 38A M 1/4 19,860 04030 A12 11/16 x 1-1/4 38A CRS 1/4 48,000 04031 A12 11/16 x 1-1/4 38A M 1/4 48,000 04035 A13 1-1/8 x 1-1/8 38A M 1/4 33,950 A14 A15 A21 04037 A14 11/16 x 7/8 38A M 1/4 55,560 04040 A15 1/4 x 1-1/16 38A M 1/4 72,750 04043 A21 1 x 1 38A M 1/4 34,500 04045 A22 3/4 x 5/8 38A M 1/4 50,930 04047 A23 3/4 x 1 38A M 1/4 39,370 A22 A23 A24 04050 A24 1/4 x 3/4 38A M 1/4 76,500 04053 A25 1 38A M 1/4 35,620 04055 A26 5/8 38A M 1/4 61,120 04057 A31 1-3/8 x 1 38A CRS 1/4 27,780 04060 A31 1-3/8 x 1 38A M 1/4 27,780 A25 A26 A31 04063 A32 1 x 5/8 38A M 1/4 38,200 04065 A33 1 x 1/2 38A M 1/4 38,200 04067 A34 1-1/2 x 3/8 38A M 1/4 25,470 04070 A35 1 x 3/8 38A M 1/4 38,200 07073 A36 1-5/8 x 3/8 38A M 1/4 23,520 A32 A33 A34 04075 A37 1-1/4 x 1/4 38A M 1/4 30,560 04077 A38 1 x 1 38A M 1/4 34,500 04080 A39 3/4 x 3/4 38A M 1/4 47,250 04083 A40 3/4 38A M 1/4 47,250 A35 A36 A37 *Maximum Operating Speed based on 1/2" overhang.

A38 A39 A40

39 17612_Sticks_P31_40 7/20/05 10:10 AM Page 40

Norton Pacesetter Mounted Points

B Shapes The standard shank size is 1/8", 1/4" x 1-1/2" and 3/8 x 2". All coarse (CRS) grits are hard grade. All medium (M) and medium/fine (M/F) grits are medium grade.

UPC Code # Speed* Shape Size Spec Spindle 730006 RPM B41 B42 B43 04100 B41 5/8 x 5/8 38A M 1/8 33,750 04101 B41 5/8 x 5/8 38A M 1/4 61,120 04105 B42 1/2 x 3/4 38A M 1/8 33,750 04106 B42 1/2 x 3/4 38A M 1/4 61,120 B44 B45 B46 04110 B43 1/4 x 5/16 38A M 1/8 81,370 04113 B44 7/32 x 3/8 38A M 1/8 68,400 04115 B45 3/16 x 5/16 38A M 1/8 104,250 04117 B46 1/8 x 5/16 38A M 1/8 105,000 B47 B51 B52 04120 B47 1/8 x 5/32 38A M 1/8 105,000 04125 B51 7/16 x 3/4 38A M 1/8 45,370 04128 B52 3/8 x 3/4 38A M 1/8 45,370 04127 B52 3/8 x 3/4 38A M 1/4 81,000 B53 B54 B55 04129 B52 3/8 x 3/4 38A M/F 1/8 45,370 04140 B53 5/16 x 5/8 38A M 1/8 60,000 04150 B54 1/4 x 1/2 38A M 1/8 60,000 04155 B55 1/8 x 1/4 38A M 1/8 105,000 B61 B62 B63 04157 B61 3/4 x 5/16 38A M 1/8 38,250 04158 B61 3/4 x 5/16 38A M 1/4 50,930 04160 B62 1/2 x 3/8 38A M 1/8 41,020 04162 B63 1/4 x 3/16 38A M 1/8 92,400 B64 B65 B70 04164 B64 1/4 x 1/16 38A M 1/8 105,000 04166 B65 1/8 x 1/8 38A M 1/8 105,000 04168 B70 3/4 x 1/8 38A M 1/8 50,930 B71 B72 B73 04170 B71 5/8 x 3/32 38A M 1/8 61,120 04172 B72 1/2 x 1/8 38A M 1/8 73,500 04174 B73 1/2 x 3/32 38A M 1/8 73,500 04176 B74 7/32 x 3/32 38A M 1/8 105,000 B74 B81 B82 04178 B81 3/4 x 3/16 38A M 1/8 50,930 04180 B82 1/2 x 1/4 38A M 1/8 76,390 04182 B83 3/8 x 3/16 38A M 1/8 87,600 04184 B84 5/16 x 3/16 38A M 1/8 105,000 B83 B84 B90 04186 B90 1/2 x 1/2 38A M 1/8 34,500 04188 B91 1/2 x 5/8 38A M 1/8 34,500 04189 B91 1/2 x 5/8 38A M 1/4 61,500 04192 B92 1/4 x 1/4 38A M 1/8 81,370 B91 B92 B93 04194 B93 3/16 x 3/16 38A M 1/8 105,000 04196 B94 1/64 x 3/32 38A M 1/8 105,000

*Maximum Operating Speed based on 1/2" overhang. B94

40 17612_Sticks_P41_44 7/20/05 2:28 PM Page 41

Norton Pacesetter Mounted Points

B Shapes (continued) The standard shank size is 1/8", 1/4" x 1-1/2". All coarse (CRS) grits are hard grade. All medium (M) and medium/fine (M/F) grits are medium grade.

UPC Code # Speed* Shape Size Spec Spindle 730006 RPM 04198 B95 1/8 x 3/16 38A M 1/8 105,000 B95 B96 B97 04201 B96 1/8 x 1/4 38A M 1/8 105,000 04200 B96 1/8 x 1/4 38A M/F 1/8 105,000 04205 B97 1/8 x 3/8 38A M 1/8 105,000 04207 B98 3/32 x 1/4 38A M 1/8 105,000 B98 B101 B102 04210 B101 5/8 x 11/16 38A M 1/8 33,750 04211 B101 5/8 x 11/16 38A M 1/4 61,120 04215 B102 5/8 x 1/2 38A M 1/8 45,370 04217 B103 5/8 x 3/16 38A M 1/8 61,120 B103 B104 B105 04220 B104 5/16 x 3/8 38A M 1/8 68,400 04222 B105 1/4 x 1/4 38A M 1/8 104,250 04224 B106 1/8 x 7/64 38A M 1/8 105,000 04226 B111 7/16 x 11/16 38A M 1/8 33,750 B106 B111 B112 04227 B111 7/16 x 11/16 38A M 1/4 66,000 04230 B112 3/8 x 1/2 38A M 1/8 45,370 04232 B113 1/4 x 1/4 38A M 1/8 81,370 04234 B114 7/32 x 3/8 38A M 1/8 68,400 B113 B114 B115 04236 B115 3/32 x 1/8 38A M 1/8 105,000 04240 B121 1/2 38A M 1/8 45,370 04241 B121 1/2 38A M 1/4 76,390 04242 B121 1/2 38A M/F 1/8 45,370 B121 B122 B123 04245 B122 3/8 38A M 1/8 61,650 04246 B122 3/8 38A M/F 1/8 61,650 04250 B123 3/16 38A M 1/8 104,250 04255 B124 1/8 38A M 1/8 105,000 B124 B131 B132 04256 B124 1/8 38A M/F 1/8 105,000 04258 B131 1/2 x 1/2 38A M 1/8 34,500 04259 B131 1/2 x 1/2 38A M 1/4 61,500 04260 B131 1/2 x 1/2 38A M/F 1/8 34,500 B133 B134 B135 04263 B132 3/8 x 1/2 38A M 1/8 45,370 04265 B133 3/8 x 3/8 38A M 1/8 54,000 04267 B134 5/16 x 3/8 38A M 1/8 61,650 04269 B135 1/4 x 1/2 38A M 1/8 60,000 B136 04275 B136 1/4 x 5/16 38A M 1/8 77,250 *Maximum Operating Speed based on 1/2" overhang.

41 17612_Sticks_P41_44 7/20/05 2:28 PM Page 42

Norton Pacesetter Mounted Points

W Shapes The standard shank size is 1/8", 1/4" x 1-1/2" and 3/8 x 2". All coarse (CRS) grits are hard grade. All medium (M) and medium/fine (M/F) grits are medium grade.

UPC Code # Speed Shape Size Spec Spindle 730006 RPM 04300 W141 3/32 x 5/32 38A M 1/8 105,000 T 04304 W142 3/32 x 1/4 38A M 1/8 105,000 04303 W142 3/32 x 1/4 38A M/F 1/8 105,000 04306 W143 1/8 x 1/8 38A M 1/8 105,000 D 04310 W144 1/8 x 1/4 38A M 1/8 105,000 04313 W145 1/8 x 3/8 38A M 1/8 105,000 04314 W145 1/8 x 3/8 38A M/F 1/8 105,000 04317 W146 1/8 x 1/2 38A M 1/8 105,000 04318 W146 1/8 x 1/2 38A M/F 1/8 105,000 04320 W149 5/32 x 1/4 38A M 1/8 105,000 04322 W151 3/16 x 1/8 38A M 1/8 105,000 04325 W152 3/16 x 1/4 38A M 1/8 105,000 T 04327 W153 3/16 x 3/8 38A M 1/8 80,850 04330 W154 3/16 x 1/2 38A M 1/8 70,500 04332 W157 1/4 x 1/16 38A M 1/8 123,000 D 04335 W158 1/4 x 1/8 38A M 1/8 105,000 04337 W159 1/4 x 3/16 38A M 1/8 92,400 04340 W160 1/4 x 1/4 38A M 1/8 81,370 04343 W161 1/4 x 5/16 38A M 1/8 77,250 04345 W162 1/4 x 3/8 38A M 1/8 68,400 04347 W163 1/4 x 1/2 38A M 1/8 60,000 04350 W164 1/4 x 3/4 38A M 1/8 45,900 04352 W165 5/16 x 1/16 38A M 1/8 107,400 04355 W166 5/16 x 1/8 38A M 1/8 96,970 T 04357 W167 5/16 x 1/4 38A M 1/8 75,000 04360 W168 5/16 x 5/16 38A M 1/8 68,400 04363 W169 5/16 x 3/8 38A M 1/8 61,650 04365 W170 5/16 x 1/2 38A M 1/8 52,500 D 04367 W171 5/16 x 3/4 38A M 1/8 37,120 04370 W172 3/8 x 1/16 38A M 1/8 99,370 04373 W173 3/8 x 1/8 38A M 1/8 87,600 04375 W174 3/8 x 1/4 38A M 1/8 69,000 04377 W175 3/8 x 3/8 38A M 1/8 54,000 04380 W176 3/8 x 1/2 38A M 1/8 45,370 04383 W177 3/8 x 3/4 38A M 1/8 33,750 04385 W178 3/8 x 1 38A M 1/8 26,250 04387 W179 3/8 x 1-1/4 38A M 1/8 18,750 T 04390 W181 1/2 x 1/16 38A M 1/8 76,390 04393 W182 1/2 x 1/8 38A M 1/8 73,500 04395 W183 1/2 x 1/4 38A M 1/8 51,750 04397 W184 1/2 x 3/8 38A M 1/8 41,020 04400 W185 1/2 x 1/2 38A M 1/8 34,500 D 04401 W185 1/2 x 1/2 38A M 1/4 61,500 04402 W185 1/2 x 1/2 38A M/F 1/8 34,500 04406 W186 1/2 x 3/4 38A M 1/8 26,250 04407 W186 1/2 x 3/4 38A M 1/4 51,000 04410 W187 1/2 x 1 38A M 1/8 20,620 04412 W188 1/2 x 1-1/2 38A M 1/4 30,370 04415 W189 1/2 x 2 38A M 1/4 24,000 04417 W190 5/8 x 1/16 38A M 1/8 61,120 04420 W191 5/8 x 1/8 38A M 1/8 58,870 04423 W192 5/8 x 1/4 38A M 1/8 43,120 04425 W193 5/8 x 3/8 38A M 1/8 32,250 04427 W194 5/8 x 1/2 38A M 1/8 29,400 04428 W194 5/8 x 1/2 38A M 1/4 56,400 04430 W195 5/8 x 3/4 38A M 1/8 22,120 04433 W196 5/8 x 1 38A M 1/4 35,250 *Maximum Operating Speed based on 1/2" overhang.

42 17612_Sticks_P41_44 7/20/05 2:28 PM Page 43

Norton Pacesetter Mounted Points

W Shapes (continued) The standard shank size is 1/8", 1/4" x 1-1/2" and 3/8 x 2". All coarse (CRS) grits are hard grade. All medium (M) and medium/fine (M/F) grits are medium grade.

UPC Code # Speed Shape Size Spec Spindle 730006 RPM 04435 W197 5/8 x 2 38A M 1/4 21,000 04437 W198 5/8 x 2-1/2 38A M 1/4 16,500 04440 W199 3/4 x 1/16 38A M 1/8 50,930 T 04443 W200 3/4 x 1/8 38A M 1/8 50,930 04444 W200 3/4 x 1/8 38A M/F 1/8 50,930 04447 W201 3/4 x 1/4 38A M 1/8 38,250 D 04450 W202 3/4 x 3/8 38A M 1/8 30,600 04453 W203 3/4 x 1/2 38A M 1/8 25,500 04454 W203 3/4 x 1/2 38A M 1/4 50,930 04457 W204 3/4 x 3/4 38A M 1/4 18,900 04460 W205 3/4 x 1 38A M 1/4 34,500 04463 W206 3/4 x 1-1/4 38A M 1/4 28,720 04465 W207 3/4 x 1-1/2 38A M 1/4 24,000 T 04467 W208 3/4 x 2 38A M 1/4 18,750 04469 W209 3/4 x 2-1/2 38A M 1/4 15,000 04472 W210 7/8 x 1/16 38A M 1/8 43,650 04475 W211 7/8 x 1/8 38A M 1/8 43,650 D 04477 W212 7/8 x 1/4 38A M 1/8 33,750 04480 W213 7/8 x 3/8 38A M 1/8 27,000 04483 W214 15/16 x 1/4 38A M 1/8 32,600 04485 W215 1 x 1/8 38A M 1/8 38,200 04491 W216 1 x 1/4 38A M 1/8 30,520 04492 W216 1 x 1/4 38A M 1/4 38,200 04495 W217 1 x 3/8 38A M 1/4 38,200 04498 W218 1 x 1/2 38A M 1/4 38,200 04500 W219 1 x 3/4 38A M 1/4 35,100 T 04502 W220 1 x 1 38A M 1/4 25,500 04505 W221 1 x 1-1/2 38A M 1/4 19,120 04508 W222 1 x 2 38A CRS 1/4 15,900 04509 W222 1 x 2 38A M 1/4 15,900 D 04507 W222 1 x 2 37C CRS 1/4 15,900 04512 W223 1 x 2-1/2 38A M 1/4 12,370 04515 W224 1 x 3 38A M 1/4 10,605 04517 W225 1-1/4 x 1/4 38A M 1/4 30,560 04520 W226 1-1/4 x 3/8 38A M 1/4 30,560 04523 W227 1-1/4 x 1/2 38A M 1/4 30,560 04525 W228 1-1/4 x 3/4 38A M 1/4 30,520 04527 W229 1-1/4 x 1 38A M 1/4 24,000 T 04530 W230 1-1/4 x 1-1/4 38A M 1/4 20,400 04533 W231 1-1/4 x 1-1/2 38A M 1/4 17,620 04535 W232 1-1/4 x 2 38A M 1/4 14,250 04537 W233 1-1/4 x 2-1/2 38A M 1/4 10,880 04540 W234 1-1/4 x 3 38A M 3/8 24,380 04543 W235 1-1/2 x 1/4 38A M 1/4 25,470 D 04545 W236 1-1/2 x 1/2 38A M 1/4 25,470 04547 W237 1-1/2 x 1 38A M 1/4 22,500 04550 W238 1-1/2 x 1-1/2 38A M 1/4 15,600 04553 W239 1-1/2 x 2 38A M 1/4 12,750 04555 W240 1-1/2 x 2-1/2 38A M 3/8 21,000 04557 W241 1-1/2 x 3 38A M 3/8 18,000 04560 W242 2 x 1 38A M 1/4 19,100 04563 W243 2 x 1-1/2 38A M 3/8 19,100 04565 W244 2 x 2 38A M 3/8 19,100 04567 W245 2 x 2-1/2 38A M 3/8 19,100 04570 W246 2 x 3 38A M 3/8 16,500 *Maximum Operating Speed based on 1/2" overhang.

43 17612_Sticks_P41_44 7/20/05 2:28 PM Page 44

Effective August 1, 2005

Terms and Conditions

Minimum Order: All orders are subject to a minimum charge of $20.00. Any order entered having a net invoice value of less than $20.00 will be invoiced at $20.00.

Transportation: Prepaid and assumed on orders with a net value of $1,500 per shipment. All others shipped collect or prepaid and added to the invoice.

Weights: All catalog weights are approximate and are for guidance only.

Returned Goods: Goods may not be returned without approval. Any return must be accompanied by a Returned Goods Authorization number (RGA #) furnished by sales dept.

Damaged Goods: Damage must be reported immediately to carrier and claim filed at the distributor end. Hidden damage must be reported to us within five working days of receipt of goods.

Prices Are Subject To Change Without Notice

Sticks & Stones Unlimited, Inc. Distributed By:

44