DOCSLIB.ORG

Simple, Faster and Safer Is the Urrea Way. Cutting and Grinding Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Simple, Faster and Safer Is the Urrea Way. Cutting and Grinding Tools SIMPLE, FASTER AND SAFER IS THE URREA WAY. CUTTING AND GRINDING TOOLS. These accessories, mostly consumable, are used with machine tools, are stationary and portable equipment, and are used to work on different types of materials: • Drills for concrete with straight shanks, SDS plus and SDS max. • Drills for metals that are different materials as cobalt, premium and high speed steel, with measurements in inches, metric, and numerical and alphabetical gauges, and designs of straight, reduced and conical step. • Special bits such as center and step drill bits, router and flat drill bits, worm and punch bits. • Vertical cutters, woodruf type burrs, square and round burrs ideal for lathes and milling machines. • High-speed taps in sets and bimetal hole saws and mandrel guides, ideal for drilling large diameters in different types of materials • Discs for ceramic cuts, cutting of wood, and abrasives for cutting and roughing of metals and stones. • Stones for roughing, polishing or sharpening different shapes and materials such as silicon carbide; Gray and white aluminum oxide. • Mounted tips of various sizes and shapes, ideal for working with mototool in fine grinding and detailed work in dies, molds, etc. • Crimped and braided wire brushes, circular and cup type, to give finishes, remove rust, paint, residues, remove burrs and polish rough surfaces. • Files and rasps of standard shapes and sizes; flat, half round, round, triangle, bastard and smooth. urreaprofessionaltools.com 20 20 CUTTING AND GRINDING TOOLS SDS PLUS CHISELS SDS SDS SDS STEEK-DREH-STZT STEEK-DREH-STZT STEEK-DREH-STZT SPECIAL DIRECT SYSTEM SPECIAL DIRECT SYSTEM SPECIAL DIRECT SYSTEM • Ideal for gouging concrete channels in concrete with • Anti-lock cutting edges. reinforced edges. • Perfect for removing surface materials. • helical working head design for better air and dust removal. ITEM DESCRIPTION LENGTH MAX. DIAMETER LIST PRICE ITEM DESCRIPTION LENGTH TIP SIZE LIST PRICE ITEM DESCRIPTION LENGTH DIAMETER LIST PRICE 87G22 Gouging 10” 7/8” 1 $40.14 87F20 Flat 10” 13/16” 1 $25.55 87P14 Helical 10” 9/16” 1 $26.53 SDS MAX CONCRETE DRILL BITS SDS NEW STEEK-DREH-STZT SPECIAL DIRECT SYSTEM You can drill: BMAX5/8X13 Concrete Stone Brick Reinforced Concrete TAPS • Progressive-core channel helps the thicker part of the spiral flute with more friction during • Reinforced tip made of tungsten to ensure perforations in concrete and metal and reduces drilling, providing greater resistance during use. vibration. • Self-centering point, lateral supports and six cutting edges in combination with the geometry of the spiral, evacuate a higher quantity of dust with great speed. ITEM SIZE TOTAL LENGTH FLUTE LENGTH LIST PRICE ITEM SIZE TOTAL LENGTH FLUTE LENGTH LIST PRICE CHISELS, DRILL BITS AND BMAX5/8X13 5/8” 13” 8" 1 $80.92 BMAX11/8X13 1-1/8” 13” 8" 1 $142.65 BMAX5/8X21 5/8” 21” 15" 1 $111.63 BMAX11/8X21 1-1/8” 21” 15" 1 $316.56 BMAX5/8X36 5/8” 36” 30" 1 $134.21 BMAX11/8X36 1-1/8” 36” 30" 1 $417.09 BMAX3/4X13 3/4” 13” 8" 1 $80.39 BMAX11/4X21 1-1/4” 21” 15" 1 $318.59 BMAX3/4X21 3/4” 21” 15" 1 $109.72 BMAX11/4X36 1-1/4” 36” 30" 1 $464.36 BMAX3/4X36 3/4” 36” 30" 1 $155.69 BMAX13/8X21 1-3/8” 21” 15" 1 $319.57 BMAX7/8X13 7/8” 13” 8" 1 $104.82 BMAX13/8X36 1-3/8” 36” 30" 1 $474.40 BMAX7/8X21 7/8” 21” 15" 1 $137.08 BMAX11/2X21 1-1/2” 21” 15" 1 $319.57 BMAX7/8X36 7/8” 36” 30" 1 $195.12 BMAX11/2X36 1-1/2” 36” 30" 1 $508.57 BMAX1X13 1” 13” 8" 1 $112.48 BMAX13/4X21 1-3/4” 21” 15" 1 $325.63 BMAX1X21 1” 21” 15" 1 $143.95 BMAX13/4X36 1-3/4” 36” 30" 1 $519.63 BMAX1X36 1” 36” 30" 1 $237.76 SDS PLUS PREMIUM CONCRETE DRILL BITS SDS NEW STEEK-DREH-STZT SPECIAL DIRECT SYSTEM You can drill: BROCAS PARA CONCRETE PARA BROCAS Concrete Stone Brick Reinforced BSDSP1/4X4 concrete • Bits for hammer drills manufactures with a special coating that supports the SDS plus bits. Its • URREA’s SDS plus premium drill bit can create up to 1,500 perforations, in contrast with 3 cutting edges are unique—they create perfectly round holes when drilling, as well as optimal traditional bits at only 300. impact and rotation energy transfer from the drill hammer. • 3 cutting edges ensure perfectly round perforations. They are rebar-resistant. ITEM SIZE TOTAL LENGTH FLUTE LENGTH LIST PRICE ITEM SIZE TOTAL LENGTH FLUTE LENGTH LIST PRICE BSDSP1/4X4 1/4" 4" 1-7/8" 1 $15.46 BSDSP1/2X8 1/2" 8" 6" 1 $30.21 BSDSP1/4X6 1/4" 6" 4" 1 $16.07 BSDSP1/2X12 1/2" 12" 9" 1 $37.20 BSDSP1/4X8 1/4" 8" 6" 1 $19.20 BSDSP1/2X18 1/2" 18" 16" 1 $47.58 BSDSP1/4X12 1/4" 12" 10" 1 $28.57 BSDSP9/16X6 9/16" 12" 10" 1 $31.81 BSDSP5/16X6 5/16" 6" 4" 1 $16.78 BSDSP9/16X12 9/16" 6" 4" 1 $38.17 BSDSP5/16X12 5/16" 12" 10" 1 $30.84 BSDSP5/8X6 5/8" 6" 3" 1 $32.30 BSDSP3/8X4 3/8" 4" 2" 1 $17.66 BSDSP5/8X8 5/8" 8" 6" 1 $37.33 BSDSP3/8X6 3/8" 6" 4" 1 $19.61 BSDSP5/8X12 5/8" 12" 8-7/8" 1 $39.51 BSDSP3/8X8 3/8" 8" 6" 1 $22.38 BSDSP3/4X8 3/4" 8" 4-3/4" 1 $48.23 BSDSP3/8X12 3/8" 12" 10" 1 $31.85 BSDSP3/4X12 3/4" 12" 10" 1 $59.29 BSDSP1/2X6 1/2" 6" 3-5/32" 1 $22.60 BSDSP3/4X18 3/4" 18" 14-9/16" 1 $67.03 290 urreaprofessionaltools.com CUTTING AND GRINDING TOOLS CUTTING AND GRINDING TOOLS 20 SUGGESTED USE FOR BEST PERFORMANCE IN URREA DRILL BITS LINE * Iron: Gray, ductile and cast iron. ** Concrete: Rough and smooth concrete. *** Carbide: Cemented and tungsten carbide. **** High speed steel hss Metric, fractional, long shank, industrial Steel Stainless steel Casting steel Iron * Titanium Aluminum Magnesium Bronze Copper Brass Regular steel sheet Construction rod Concrete ** Concrete with rod Precast concrete Brick Plaster Wood Acrylic sheet Plastic Granite Stone Carbide *** Molybdenum Nickel Vanadium use, numerical and letter drill bits DRILL BITS SDS plus - max for concrete SDS plus premium for concrete SDS plus for concrete Straight shank drill bit for concrete Cobalt Premium 1/2” Reduced shank High speed steel hss**** Morse taper shank drill bits Step drill bits TAPS Center drill countersink bit Performance could be different according the machines used, application and applied speeds. SDS PLUS CONCRETE DRILL BITS CHISELS, DRILL BITS AND SDS NEW STEEK-DREH-STZT SPECIAL DIRECT SYSTEM You can drill: BSDS3/16X6 Concrete Stone Brick • 30% faster. • The tungsten carbide tip with two cutting edges combines a large strike area and impact • Thin carbide tip penetrates material more easily. • Longer useful life. concentration to obtain a better percussion effect. 2-flute design with square grooves • These drill bits are for use on hammer drills fitted with an SDS plus chuck. Urrea’s SDS plus • Greater precision. combines a compression and vacuum chamber that accelerates swarf removal, making it drill bits are ideal for use in solid and dry concrete. They are completely tempered to endure • Reduces slippage. 30% faster than any conventional drill bit with a straight shank. high torque, flexion and pressure. ITEM SIZE TOTAL LENGTH FLUTE LENGTH LIST PRICE ITEM SIZE TOTAL LENGTH FLUTE LENGTH LIST PRICE BSDS3/16X4 3/16" 4" 2" 1 $6.84 BSDS1/2X12 1/2" 12" 10" 1 $24.18 MADERA PARA BROCAS BSDS3/16X6 3/16" 6" 4" 1 $8.04 BSDS1/2X18 1/2" 18" 16" 1 $34.15 BSDS3/16X8 3/16" 8" 6" 1 $11.05 BSDS1/2X24 1/2" 24" 22" 1 $40.60 BSDS7/32X6 7/32" 6" 4" 1 $9.64 BSDS9/16X6 9/16" 6" 4" 1 $21.96 BSDS1/4X4 1/4" 4" 2" 1 $6.69 BSDS9/16X12 9/16" 12" 10" 1 $31.44 BSDS1/4X6 1/4" 6" 4" 1 $7.24 BSDS5/8X6 5/8" 6" 4" 1 $20.87 BSDS1/4X8 1/4" 8" 6" 1 $10.81 BSDS5/8X8 5/8" 8" 6" 1 $25.29 BSDS1/4X12 1/4" 12" 10" 1 $18.76 BSDS5/8X12 5/8" 12" 10" 1 $28.86 BSDS5/16X4 5/16" 4" 2" 1 $9.04 BSDS5/8X18 5/8" 18" 16" 1 $41.35 BSDS5/16X6 5/16" 6" 4" 1 $8.82 BSDS5/8X24 5/8" 24" 21" 1 $58.80 BSDS5/16X8 5/16" 8" 6" 1 $12.67 BSDS3/4X6 3/4" 6" 4" 1 $33.36 BSDS5/16X12 5/16" 12" 10" 1 $20.03 BSDS3/4X8 3/4" 8" 6" 1 $38.95 BSDS5/16X18 5/16" 18" 16" 1 $25.24 BSDS3/4X12 3/4" 12" 10" 1 $43.93 BSDS3/8X6 3/8" 6" 4" 1 $9.55 BSDS3/4X18 3/4" 18" 16" 1 $59.13 BSDS3/8X8 3/8" 8" 6" 1 $13.69 BSDS7/8X10 7/8" 10" 8" 1 $51.66 BSDS3/8X12 3/8" 12" 10" 1 $17.69 BSDS7/8X12 7/8" 12" 10" 1 $64.10 BSDS3/8X18 3/8" 18" 16" 1 $28.27 BSDS7/8X18 7/8" 18" 16" 1 $73.34 BSDS3/8X24 3/8" 24" 21" 1 $42.46 BSDS1X12 1" 12" 10" 1 $74.50 BSDS1/2X6 1/2" 6" 4" 1 $13.25 BSDS1X18 1" 18" 16" 1 $84.68 BSDS1/2X8 1/2" 8" 6" 1 $18.64 291 20 CUTTING AND GRINDING TOOLS STRAIGHT SHANK CONCRETE DRILL BITS Sanblasted finish.
Load more

Recommended publications
  • 8.10 Drill Grinding Device
    Special Accessories 8.10 Drill Grinding Device 1. Introduction Device can accurately grind precision drill and tools, this drill grinding machine system consists of a motor and grinding wheel head composed of the drill tool in a precision six claw clip manual chuck, and with a rotatable operating handle, when swing operation handle, that produce the following actions: (A) The rotation of the drill blade in contact with the wheel. (B) Drill bit to the forward movement of the wheel, which is determined by a simple plane caused by the cam and the drive arm. (C) By the rotation of the operation 1 and 2 together, can produce about necessary, Forward and backward rotation, and rotation of the left and right around the vertical arm by means of proper adjustment of the cam drive for grinding. 2. Installation Three methods of operation (A) By the arrows in the slider on the scale required in the angle, and then tighten (12) handles. Pulled the latch position behind the locking screws, remember locking. (B) Fitted inside the grinding cam 6, the upper fixed block (2) on the green slot. (C) After setting the required bevel adjustment (1) handle rake angle 0 ° ~ 18 ° can be adjusted after the oblique angle is larger, thinner blade. The higher the M-40 Operating Manual 8-49 Special Accessories hardness of the material to be cut, then the posterior oblique angle should be smaller; lower the hardness of the material to be cut, then the posterior oblique angle should be larger. (D) If a straight shank drill bit, then caught in six claw clip directly to the head; such as slope handle, is mounted on the right sleeve of Mohs, and then to six claw tip drill chuck clamping, which can center of the drill grinding more solid and more accurate.
    [Show full text]
  • IBS, INCORPORATED T a P S B U R S B L a D E S Index
    IBS, INCORPORATED Index 4-40 thru 1/2-10 Tap, Die & Drill Set PT-8 Taps, Burs & Blades 9/16-12 thru 3/4-16 Tap, Die & Drill Set PT-8 A Index 10 Pc NC/NF Power Taps w/Index PT-5, PT-7 10 Pc NC/NF Taper Taps w/Inde PT-5, PT-7 Annular Cutters 18 Pc NC Bottom Taps & Drill Bits w/Index PT-5, PT-7 Carbide Tipped 18 Pc NC Taper Taps & Drill Bits w/Index PT-5, PT-7 CT150 & CT200 PT-14, PT-16 Nitro-Carb Hand Tap PT-5, PT-7 IBS High Speed Steel PT-16 Assortments, Cutting Tools B Advanced Edge Power Reciprocating Saw Blades T Blades with Tool Ease Lubricant Stick PT-45 100 PK Shark Serrated Blades PT-54 Annular Cutters - Carbide Tipped Bandsaw, Bi-Metal A PT-15 General Information PT-36 Annular Cutters - High Speed Steel PT-17 Portable Blades PT-41 P Black Hole Carbide Tipped Cutters Troubleshooting PT-37, PT-38, PT-39, PT-40 1" Depth - 4 Pc.Set PT-23 Bi-Metal 1" Depth - 5 Pcs PT-23 Air Saw Blades PT-51 S 3/16" Depth - 5 Pc. PT-23 Reciprocating Saw PT-46 762R - 5 Pc. - 3/16" Depth PT-22 Boar Blades PT-48 763R - 4 Pc. 1" Depth PT-22 Thick Demolition PT-47 764R - 5 Pc. - 1" Depth PT-23 Sabre/Jig PT-52 Carbide Burs PT-59 Chop Saw-Carbide Tipped B Hole Saws 14" Blade for Aluminum PT-34 Bi-Metal 14" Blade for Stainless Steel PT-34 U Advanced Bi-Metal Hole Saws 2-1/8"- 4" PT-27 14" Blade for Steel PT-34 Advanced Bi-Metal Hole Saws 3/4"- 4" PT-28 Circular Saw Advanced Bi-Metal Hole Saws 5/8"- 2" PT-29 Combination Blade PT-32 R M42 Thin Wall Hole Saws Travel Tray Assortment PT-18 Heavy Duty Deck / Nail Cutting Blade PT-32 Hole Saws - Bi-Metal Miter Saw
    [Show full text]
  • Ld-16B - Ld-16Ba - Ld-16Be - Ld-16Bt
    RAIL DRILL LD-16B - LD-16BA - LD-16BE - LD-16BT ENGLISH OPERATION AND MAINTENANCE MANUAL 1 16 M 187 E INDEX page 1. General characteristics ............................................................................................................................................... 6 2. Accessories supplied with the drill ........................................................................................................................ 7 3. Accessories to be ordered separately ................................................................................................................... 9 4. Spindle advance lever ................................................................................................................................................ 13 5. Motor ON/OFF switch (EMERGENCY) ................................................................................................................... 14 6. LED worklights ON/OFF switch ............................................................................................................................... 14 7. LED indicator .................................................................................................................................................................. 15 8. "Drilling assistance" function ................................................................................................................................... 15 9. Rechargeable battery ................................................................................................................................................
    [Show full text]
  • Types of Tap
    Types of Tap HAND TAPS ISO 529 These are straight flute general purpose tools which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, serial taps may be needed, especially for coarse threads. ISO 529 hand taps can be supplied in sets of three; bottom, second and taper leads, or individually. BOTTOM TAPS have a chamfer (lead) of 1–2 threads, the angle of the lead being around 18 degrees per side. They are used to produce threads close to the bottom of blind holes. SECOND TAPS have a lead of 3-5 threads at 8 degrees per side. They are the most popular and can be used for through holes, or blind holes where the thread does not need to go right to the bottom. TAPER TAPS have a lead of 7-10 threads at 5 degrees per side. The taper lead distributes the cutting force over a large area, and the taper shape helps the thread to start. They can therefore be used to start a thread prior to use of second or bottom leads, or for through holes. IMPORTANT NOTE ON TERMINOLOGY! In the U.K. bottom taps are often referred to as ‘plugs’. In North America second taps are often referred to as ‘plugs’! This can easily lead to confusion. To avoid problems when ordering it is best to use the terms bottom, second and taper.
    [Show full text]
  • SM-140 (Beading Expander)
    SM-140 SM-140 SPECIFICATIONS O.D. Ga. Beading Mandrel Reverse Drive Cplg. Expansion Expander No. Square Coupling Hex. Range 2” OD TUBES 10 41633-0010 2-1/2” OD TUBES 3” OD TUBES 11 41633-0011 9/16” 1.700-1.906” 2 3/4” Sq. 42360 14.3mm (43.2-48.4mm) 12 41633-0012 COMBINATION BEADING 13 41633-0013 EXPANDER 10 41634-0010 11 41634-0011 3/4” 2.200-2.440” 2-1/2 3/4” Sq. 42361 19.1mm (55.9-62.0mm) 12 41634-0012 13 41634-0013 10 41359-0010 7/8” 2.700-2.940” 3 11 41359-0011 1” Sq. 42362 22.2mm (68.6-74.7mm) 12 41359-0012 TOOL MAINTENANCE REPLACING BEADING ROLL When replacing Beading Roll, make sure it is installed with the side stamped the word ‘TOP’ or its part no. facing upward. OPERATING INSTRUCTIONS LUBRICATION ! & The tremendous force to simultaneously expand and bead the tubes, results in an ex- SERVICE MANUAL tremely heated tool. This requires a proper schedule of maintenance to lubricate the bear- ings involved to prevent their premature failure. Lubricate the support roll assembly bear- Rev: A, 2/23/2007 ings (key 8 &12) and the front guide roll assembly (key 4) frequently. Apply a good bear- ing grease through the grease fittings provided in parts (key 5, 9 &10). TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR’S MANUAL. Thomas C. Wilson, Inc. Thomas C. Wilson, Inc. 21-11 44th Avenue, Long Island City, New York 11101 21-11 44th Avenue, Long Island City, New York 11101 Tel: (718)729-3360 Fax: (718)361-2872 http://www.tcwilson.com Tel: (718)729-3360 Fax: (718)361-2872 http://www.tcwilson.com 8 E-mail: [email protected] E-mail: [email protected] SM-140 SM-140 SAFETY INSTRUCTIONS TROUBLE-SHOOTING Problem Cause & Solutions ! WARNING! Bead not complete 1.
    [Show full text]
  • Tube Pullers Tube Removal Tools
    TUBE PULLERS TUBE REMOVAL TOOLS Pipe Bevelling Machines Pipe Cutting Machines Grinding Machines Pipe Stands and Clamps Pipe Purging Plate Bevellers Heat Exchanger, Boiler & Bundle 3 - ” CONTINUOUS HYDRAULIC TUBE PULLER 8” 4 O.D. PULLING GUN POWERPACK FEATURES : Pulling gun communicates with electric powerpack via 9v DC control. This ensures safety and eliminates the need of electrical cord between pump and gun that other manufacturers provide. In pneumatic version communication is via pneumatic control. Available with a choice of Electric-TPP System or Pneumatic-PPP System for hazardous, explosive working environments. Microprocessor controls on powerpack and gun ensure trouble free life. Removes tube without any damage to tube sheet. Low setup time and ease of operation. High power & High speed automatic cycling, for highest speed of pull available worldwide. Auto switchover from low pressure high flow to high pressure low flow on load and again back to low pressure high flow when load is released. Automatic slow start feature to minimize risk of breaking tubes and to conserve consumables. Compact design of Powerpack and Gun. Interchangeable pulling guns with same Powerpack. 15 ton gun for light duty high speed work, 30 ton gun for heavy duty tube pulling and 45 ton gun for tubes upto 3” O.D. Pulls up to 3” OD tubes continuously, pulls up to 4” O.D. stub. Low maintenance cost and worldwide availability of components. Significant saving of time and money over conventional systems. Unit is portable with handle and mounted on four wheels for easy handling. Unit will pull tubes continuously through the gun effortlessly, needing only one man for operation.
    [Show full text]
  • MODEL G0686 LARGE DRILL BIT GRINDER OWNER's MANUAL (For Models Manufactured Since 01/15)
    MODEL G0686 LARGE DRILL BIT GRINDER OWNER'S MANUAL (For models manufactured since 01/15) COPYRIGHT © MAY, 2009 BY GRIZZLY INDUSTRIAL, INC., REVISED MARCH, 2019 (MN) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #TS11442 PRINTED IN TAIWAN V2.03.19 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage authorization, proper inspection and maintenance, manual availability and compre- hension, application of safety devices, cutting/sanding/grinding tool integrity, and the usage of personal protective equipment. The manufacturer will not be held liable for injury or property damage from negligence, improper training, machine modifications or misuse. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement and other masonry products. • Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
    [Show full text]
  • Build a Plane That Cuts Smooth and Crisp Raised Panels With, Against Or Across the Grain – the Magic Is in the Spring and Skew
    Fixed-width PanelBY WILLARD Raiser ANDERSON Build a plane that cuts smooth and crisp raised panels with, against or across the grain – the magic is in the spring and skew. anel-raising planes are used Mass., from 1790 to 1823 (Smith may to shape the raised panels in have apprenticed with Joseph Fuller doors, paneling and lids. The who was one of the most prolific of the profile has a fillet that defines early planemakers), and another similar Pthe field of the panel, a sloped bevel example that has no maker’s mark. to act as a frame for the field and a flat Both are single-iron planes with tongue that fits into the groove of the almost identical dimensions, profiles door or lid frame. and handles. They differ only in the I’ve studied panel-raising planes spring angles (the tilt of the plane off made circa the late 18th and early 19th vertical) and skew of the iron (which centuries, including one made by Aaron creates a slicing cut across the grain to Smith, who was active in Rehoboth, reduce tear-out). The bed angle of the Smith plane is 46º, and the iron is skewed at 32º. Combined, these improve the quality of cut without changing the tool’s cutting angle – which is what happens if you skew Gauges & guides. It’s best to make each of these gauges before you start your plane build. In the long run, they save you time and keep you on track. Shaping tools. The tools required to build this plane are few, but a couple of them – the firmer chisel and floats – are modified to fit this design.
    [Show full text]
  • Drilling 22 | Drilling | Overview Bosch Accessories for Power Tools 09/10 Your Guide to the Right Drill Bit
    Drilling 22 | Drilling | Overview Bosch Accessories for Power Tools 09/10 Your guide to the right drill bit. These information pages are designed to help users. They cover the correct use of the appropriate power tool and the various drill bits for commonly-used materials. The charts given below are only intended as recommendations and cannot be regarded as a complete guide. For more detailed queries, please contact Bosch directly. The fact that power tools and drill bits are mutually dependent is often ignored. It is only once this relationship has been identifi ed and taken into account that the service life of both the tool and its drill bit can be optimised. Drill/Impact drill Drill/Impact drill Drill/Impact drill Drill/Impact drill up to 600 watts up to 700 watts up to 1010 watts up to 1150 watts Cordless drill/driver Cordless drill Cordless impact drill Metal drill bits Sheet metal cone bit up to 20 mm over 30 mm Steel drill bit up to 10 mm up to 13 mm up to 20 mm Wood drill bit Wood drill bit up to 15 mm up to 25 mm up to 32 mm Auger bit up to 18 mm up to 32 mm Installation and form- work drill bits 18 mm 30 mm Flat drill bits up to 40 mm Forstner bit up to 50 mm TC-tipped hinge-boring bit up to 50 mm Concrete drill bit Concrete drill bit up to 15 mm up to 20 mm up to 25 mm Masonry drill bit up to 12 mm up to 18 mm up to 24 mm up to 30 mm Core cutters up to 68 mm up to 82 mm Diamond core edge sinkers up to 82 mm Multi-purpose and rotary drill bits Multi-purpose drill bit 14 mm Glass drill bit 12 mm Holesaws up to 40 mm up to 60 mm up to 80 mm up to 152 mm Bosch Accessories for Power Tools 09/10 Drilling | Overview | 23 Working on metal and plastic.
    [Show full text]
  • Disston-Catalog.Pdf
    OUR HAND-MADE HISTORY From the beginning, Henry Disston knew that to compete with the then superior English tools, he would need to make the best saw the world had ever known. That was 1840. With superior manufacturing, a vision for innovation, and an earnestness of spirit, Disston created saws manufactured to usher in a new industrial age. Today, Disston is a global manufacturer of hole saws, bandsaw blades, jig saw blades, reciprocating saw blades, drill bits, and other hand and power tool related accessories for the DIY, contractor and industrial markets. Its domestic operation is a state-of-the-art production facility in South Deerfield, MA. The company also operates fabrication and production enterprises overseas. Disston’s international manufacturing and distribution capabilities combined with its history and tradition as a brand leader in the tool category for over 165 years provide its customers the optimum blend of value, performance and integrity. HOLE SAWS page Blu-Mol® Xtreme Bi-Metal Hole Saws ........................................E3 Table of Blu-Mol® Xtreme Merchandiser / Display Line ...........................E4 Blu-Mol® Xtreme Hole Saw Kits .................................................E4 Contents Blu-Mol® Bi-Metal Hole Saws ....................................................E5 Blu-Mol® Merchandiser / Display Line ........................................E6 Blu-Mol® Hole Saw Kits .............................................................E6 Blu-Mol® Sheet Metal Hole Saws ..............................................E7
    [Show full text]
  • Utilization of Waste by Preparing the Product from Swarf Forging of Alloy
    et International Journal on Emerging Technologies 6(2): 181-183(2015) ISSN No. (Print) : 0975-8364 ISSN No. (Online) : 2249-3255 Utilization of Waste by Preparing the Product from Swarf Forging of Alloy Steel (16MNCR5) Abid Nazir and Harvinder Lal Department of Mechanical Engineering, RIET, Phagwara, (PB), India (Corresponding author: Abid Nazir) (Received 01 October, 2015 Accepted 06 November 2015) (Published by Research Trend, Website: www.researchtrend.net) ABSTRACT: The aim of thesis is to prepare the product from swarf forging of alloy steel (16MnCr5). This thesis is an example of how the waste fraction can be transferred from waste to a resource that can be used in other industrial processes. It offers both environmental and economic benefits. Swarf forging gives better control, environmental credits, cost savings an increased margins. Swarf collected from lathe, milling, drill or any other cutting machine is cleaned by degreasing, pickling and acid pickling. Preliminary heat treatment is done to eliminate the work hardening, moisture content and impurity content. Swarf can be continuous, discontinuous or powder form. After collection of swarf, put in mild steel tube for compression. Compression of swarf is done by hydraulic press. The force is applied on piston which is inserted in tube. After compression, swarf which is in form of cylinder is taken out. After this heat the samples are heated and forged with the help of manual hammers or with help of hydraulic hammer. After forging hardness, density and microstructure are checked. The values indicate that product made by swarf forging can be used for low load application like door handles, hangers etc.
    [Show full text]
  • Metal Drill Bits Hammer Drill Stronger Than Steel Chisel Drill Bits Stone and Special Metal Drill Bits
    BITS METAL DRILL BITS HAMMER DRILL STRONGER THAN STEEL CHISEL DRILL BITS STONE AND SPECIAL METAL DRILL BITS 307 | HSS-E DIN 338 cobalt 76–79 WOOD DRILL BITS 311 | HSS TIN DIN 338 steel drill bit 80–81 302 | HSS DIN 338, ground, split point 82–85 300 | HSS DIN 338, standard 86–90 300 | HSS DIN 338, standard, shank reduced 91 340 | HSS DIN 340, ground, split point, long 92 342 | HSS DIN 1869, ground, extra long 93 SAWS 344 | HSS hollow section drill bit / Facade drill bit 94 345 | HSS DIN 345 morse taper 95–96 303 | HSS DIN 1897 pilot drill bit, ground, split point, extra short 97 310 | HSS DIN 8037 carbide tipped 98 312 | HSS-G Speeder DIN 338 RN metal drill bit 99 304 | HSS Double end drill bit, ground, split point 100 315 | HSS Drill bit KEILBIT, ground 101 317 | HSS combination tool KEILBIT 102 329 | HSS countersink KEILBIT 103 327 | HSS countersink 90° DIN 335 C 104 328 | HSS deburring countersink 105 ASSORTMENTS 326 | HSS tube and sheet drill bit 106 325 | HSS step drill 107 140 | Scriber 108 320 | HSS hole saw bi-metal 109–112 SHELVES | From Pros for Pros | www.keil.eu | 73 MODULES - BITS HAMMER DRILL METAL DRILL BITS Nothing stops the metal drill bits because we offer a drill bit for every application. CHISEL HSS-E TWIST DRILL BIT 135° The HSS-E drill bit is a cobalt alloyed high performance drill bit. Even with insufficient cooling it has reserve in heat resistance. Due to the alloying addition of 5 % Co in the cutting material these drill bits can be used for working with work pieces with a tensile strength of over 800N/m².
    [Show full text]