SAFETYXPRESS.COM.AU We Ship Australia Wide, Same Day Dispatch Available.

Bollards PRODUCT Speed Humps Wheel Stops CATALOGUE Convex Mirrors Tactile Indicators

Stair-Nosings ISSUE 1 Bike Racks

Order online www.safetyxpress.com.au Order by Phone 1300 049 246 2 SAFETYXPRESS.COM.AU

We Ship Australia Wide, Same Day Dispatch Available

WELCOME

Order Online www.safetyxpress.com.au

Order via Email @ [email protected]

Order by Phone  1300 049 246

Safety Xpress offers a range of safety products with a focus on car park and workplace safety.

Our latest range of Safety products and solutions are sure to meet any requirements you have. So please call our office and we will work with you to find and manufacture the right solution.

Please refer to our website for more information on our products, installation guides and our terms of service. All our products are available online at discount prices. CALL 1300 049 246 3 CONTENT

4 5 11 14 16 Bike Racks Bollards Tactiles Stair Nosings Wheel Stops

Order Online www.safetyxpress.com.au 18 20 22 24 25 Convex Mirrors Speed Humps & Barriers Temp Fencing Safety Rail Ramps

Order by Phone 1300 049 246

26 27 28 29 30 31 Signs & Safety Cones Line Marking Graco Industrial Mats Car Park Fittings Supplies Supplies Storage 4 SAFETYXPRESS.COM.AU BIKE RACKS

Bike Rack - Galvanised Bike Rack - Stainless Steel Surface Mount Hoop Hoop Surface Mount Galvanised Surface Mount Hoop Bike Rack. Made from 304 Grade Stainless Steel our Secures bikes of all sizes and is easily Hoop Bike Rack looks impressive. installed. Specifications: SKU: BHOOPSSSM Specifications: Material: Stainless steel SKU: BHOOPGALSM round tube 304 grade 50.8 x 1.6mm Width: 800mm Width: 950mm centre to centre Height: 910mm Height: 900mm Material: Hot dipped galvanised steel Surface mount plates: 7mm thick with 3 mounting holes

Bike Rack - Stainless Steel Wall Mount Bike Rack Hoop In-Ground Most effective method for multiple bike Perfect for bike storage in places where staff storage in areas short on space. Suitable for commute to work by bicycle. indoor or outdoor use. One bike can be hung vetically per bike rack. Specifications: Specifications: SKU: BHOOPSSIG SKU: WMBIKERACK Material: 304 Grade Stainless Steel Height: 700mm 46Mm Outer Diameter Depth: 600mm Width: 860mm Width: 125mm Height: 1240mm Material: Galvanised steel Anchor rods included for installing into new Finish: Powder coated Black concrete. CALL 1300 049 246 5 BOLLARDS

Surface Mount - 90mm Xpress Surface Mount - 90mm Surface Mount - 140mm The black plastic non-corrosive cap provides Our 90mm surface mount bollards are ideal The 140mm Surface Mount Bollard is one to con- a refined finish to the bollard. Fast, strong, for pedestrian separation and zoning off sider for your asset protection needs. Assess the economical and good looking. areas. Made of galaviansed steel with a risks and threats, determine the areas requiring welded steel cap and 4 hole base plate. protection and order these to fit. These imposing bollards restrict vehicle access whilst allowing clear pedestrian flow.

Specifications: Specifications: Specifications: SKU: BOLSM90X SKU: BOLSM90 SKU: BOLSM140 Height: 1000mm Height: 900mm Height: 1300mm Bollard Material: Galvanised steel Bollard Material: Galvanised steel Bollard Material: Galvanised steel Thickness: 3mm steel wall Thickness: 3mm steel wall Thickness: 3mm steel wall Diameter: 90mm OD Diameter: 90mm OD Diameter: 140mm OD Finish: Yellow powder coating, C1 red ref band Finish: Yellow powder coating, C1 red ref band Finish: Yellow powder coating, C1 red ref band Fixings: 4 Included Fixings: 4 Included Fixings: 4 Included

Surface Mount - 165mm Surface Mount - LED Solar Surface Mount - 90mm Security guards are really expensive to have Light 90mm Stainless Steel Stainless Steel 316 Grade on hand 24/7 so we have the next best thing! Our LED Solar rechargeable 90Mm Stainless Our 90mm Stainless Steel Bollards don’t Our 165mm Surface Mount Bollard is a heavy Steel Bollards are designed to impress as compromise on style or strength. When duty protection bollard useful in areas where well as providing security and protection. durability is considered important you can’t ram raids could be likely or where vehicles Ideal for providing visual guidance and go past Marine Grade Stainless Steel as illuminating walkways and paths at night, the are travelling at varying speeds in the vicin- an option for your bollards. Marine Grade ity of buildings or other assets. bollard will enhance any shopping centre, car park and building entrance while meeting Stainless Steel offers a high level of corro- architectural requirements. sion resistance so they are also perfect for Specifications: beachside locations. SKU: BOLSM165 Specifications: Bollard Material: Galvanised steel SKU: BOLSM90SSLED Specifications: Height: 1000mm Bollard Material: Stainless Steel 304 Grade SKU: BOLSM90SS Thickness: 5mm steel wall Height: 1000mm Material: 316 Marine Grade Stainless Steel Diameter: 165mm OD Diameter: 90mm OD Height: 900mm Finish: Yellow powder coating, C1 red ref band Lights: 4 x LED 0.2W Diameter: 90mm OD Fixings: 4 Included Fixings: 4 Included Fixings: 4 Included 6 SAFETYXPRESS.COM.AU

Surface Mount - 168mm Surface Mount or Below In-Ground - 90mm Stainless Steel 316 Grade Ground - Billboard Bollard Galvanised Our 168mm Stainless Steel Bollards are Showcase your brand with the Safety Xpress Due to popular demand we have a galvanised designed to impress as well as providing Billboard Bollard. Standing 1300mm high in-ground bollard available that is competi- security and protection. and 140mm in diameter the Billboard Bollard tively priced, can be filled with concrete for Manufactured from 316 Marine Grade not only provides protection but also brand extra strength and is 1300mm tall. The extra Stainless Steel with a polished finish, these exposure. Simply send us your company logo height gives better visibility and the class 1 bollards are imposing and attractive. or custom message and we will do the rest. reflective red band acts as a warning even in Available in a range of colours. dimly lit areas. Specifications: Specifications: Specifications: SKU: BOLSM168SS Height: 1200mm SKU: BILBOL140SM SKU: BOLBG90GAL Material: 316 Marine Grade Stainless Steel Height: 1300mm Material: Galvanised steel Diameter: 168mm OD Material: Galvanised steel Finish: Class 1 Red Reflective Band Fixings: 4 Included Thickness: 3mm steel wall Height: 1300mm (1000mm above ground Diameter: 140mm OD and 300mm below ground) Fixings: 4 Included Diameter: 90mm OD

In-Ground - 90mm In-Ground - 114mm In-Ground - 140mm Install this 90mm Below Ground bollard The 114mm Below Ground Bollard is manufac- The Safety Xpress Below Ground 140Mm where you need safety and security and get tured for strength and long term protection of Bollard is ideal for installation in areas the job done properly. Galvanised then pow- your assets. Suitable for being installed into where assets require protection and bollard der coated safety yellow and complete with asphalt or pliable surfaces where a concrete strength is important. This bollard comes welded anchor bars. Fillable with concrete footing is required. It also has a removable with a loose cap so the bollard can be filled for added strength. cap so its overall functionality can be with concrete for extra strength for maxi- strengthened by being filled with concrete. mum protection. Specifications: SKU: BOLBG90 Specifications: Specifications: Material: Galvanised steel SKU: BOLBG114 SKU: BOLBG140 Finish: Yellow powder coating, C1 red ref band Material: Galvanised steel Material: Galvanised steel Height: 1200mm (900mm above ground and Finish: Yellow powder coating, C1 red ref band Finish: Yellow powder coating, C1 red ref band 300mm below ground) Height: 1300mm (1000mm above ground Height: 1600mm (1300mm above ground Diameter: 90mm OD and 300mm below ground) and 300mm below ground) Wall thickness: 3mm Diameter: 114mm OD Diameter: 114mm OD Wall thickness: 5mm Wall thickness: 5mm CALL 1300 049 246 7

In-Ground - Stainless Steel In-Ground - Stainless Steel Removable - 90mm Sleeve 90mm Bevelled Top 140mm Bevelled Top Lock Stainless Steel With its clean lines and angles you’ll be This larger 140mm sized bollard is imposing For a sleek, stylish and contemporary look impressed with this bollard. Stainless steel is and impressive. Used for asset protection in consider this bollard as your solution. The known for its high level of corrosion resist- areas such as the front of corporate build- bollard locks into place when in use and is ance while offering an architectural look ings for a classy finish. The bevelled top adds easily removed for full access when needed. and feel. Used in areas such as car yards and an edge of difference. shopping centres. Specifications: Specifications: SKU: REMBOL90SS Specifications: SKU: BOLBG140SSB Material: 316 Grade Stainless Steel SKU: BOLBG90SSB Material: 304 Grade Stainless Steel Height: 900mm Material: 304 Grade Stainless Steel Finish: Brushed Stainless Steel Diameter: 90mm OD Finish: Brushed Stainless Steel Height: 1200mm (900mm above ground and Wall thickness: 3mm Height: 1200mm (900mm above ground and 300mm below ground) 300mm below ground) Diameter: 90mm OD Diameter: 90mm OD Wall thickness: 3mm Wall thickness: 3mm

Removable - 90mm Sleeve Removable - 90mm Sleeve Removable - 140mm Lock Lock Black Sleeve Lock These bollards slide into a sleeve, core This bollard looks refined with its black pow- These purpose built bollards are used as a drilled into the surface (concrete or bitumen) der coated finish and a red reflective band deterrent to thieves and to generally stop or set in new concrete. The bollard is locked for extra visibility. A padlock locks it into the vehicle access into restricted areas when into the sleeve via a padlock to keep vehicles in-ground sleeve and is easily removed when required. They can be core-drilled into out, and then when you need access it’s easy you need access. existing surfaces or set in new concrete. to unlock and take the bollard out. Specifications: Specifications: Specifications: SKU: BOLRSLB90M SKU: BOLRSL140M SKU: BOLRSL90M Material: Galvanised steel Material: Galvanised steel Material: Galvanised steel Finish: Black powder coating, C1 red ref band Finish: Yellow powder coating, C1 red ref band Finish: Yellow powder coating, C1 red ref band Height: 1000mm above ground Height: 1200mm above ground Height: 1000mm above ground Diameter: 90mm OD Diameter: 140mm OD Diameter: 90mm OD Wall thickness: 5mm Wall thickness: 5mm Wall thickness: 5mm 8 SAFETYXPRESS.COM.AU

Removable - 90mm Roller Removable - 90mm Key Removable - 140mm Key Door Sleeve Lock Lock Lock This bollard slides into an in-ground sleeve, This heavy duty bollard is easily unlocked at The Roller Door 90mm Bollard is installed core drilled into the surface (concrete or bitu- the top of the bollard using the included keys inside warehouse roller doors to provide men) or set in new concrete. It is locked into and removed via the handle on top. Once the security against ram raids and also to keep the sleeve using a key to keep vehicles out. bollard is removed, the hole is covered by the thieves from forcing the roller door up. When you need access it’s easy to unlock the sleeve lid to create a flat surface on the ground. removable bollard and take the bollard out. Specifications: Specifications: Specifications: SKU: BOLRSLROL90 SKU: BOLRKL140 SKU: BOLRKL90 Material: Galvanised steel Material: Galvanised steel Material: Galvanised steel Finish: Yellow powder coating, C1 red ref band Finish: Yellow powder coating, C1 red ref band Finish: Yellow powder coating, C1 red ref band Height: 1000mm above ground Height: 1200mm above ground Height: 1000mm above ground Diameter: 90mm OD Diameter: 140mm OD Diameter: 90mm OD Wall thickness: 5mm Wall thickness: 3mm Wall thickness: 3mm 2 x keys supplied (keyed alike) 2 x keys supplied (keyed alike)

Removable - 90mm Key Removable - Surface Mount Bollard Storage Sleeves Lock Stainless Steel Our surface mount removable bollard is made 140mm Storage Sleeve SKU: BOLSTOR140S A high-security locking system protects your of heavy duty steel and is designed to lock Suitable for storing the Safety assets and yet allows you to easily remove into a surface mount receiver. With four fixing Xpress 140mm Key Lock and 140mm Sleeve the bollard with a key. The stainless steel fin- points, they are very easily installed with no Lock Removable Bollards. ish is suitable for all weather and areas whilst core drilling required. maintaining a stylish finish. Specifications: 90mm Storage Sleeve SKU: BOLSTOR90S Specifications: SKU: REMBOLSMKA Suitable for storing the Safety Xpress 90mm SKU: BOLRKL90SS Material: Galvanised steel Key Lock and 90mm Sleeve Lock Removable Material: 304 Grade Stainless Steel Finish: Yellow powder coating, C1 red ref band Bollards. Height: 1000mm above ground Height: 1000mm above ground Diameter: 90mm OD Diameter: 90mm OD 90mm Double Storage Sleeve SKU: BOLSTOR90D Wall thickness: 3mm Wall thickness: 5mm Suitable for storing two of the Safety 2 x Keys supplied (bollards keyed alike) 2 x Keys inc. (bollards keyed alike or unique) Xpress 90mm Key Lock or 90mm Sleeve 1 x Receiver shoe inc. Lock Removable Bollards. CALL 1300 049 246 9

Bollard Hangers Remote Control Parking Parking Protector Padlock 140mm Bollard Hangers Lock Bollard Single - SKU: BOLHANG140S This bollard is discreet but more than able The Fold Down Parking Protector Padlock Double - SKU: BHANG140D to do its job! Imagine always having your Bollard is secured with a padlock at the base Single and Double Bollard Hangers suitable parking spot available and not having to get and is a great option when unique keys are for hanging the Safety Xpress 140mm Key out of your car to make it work. Perfect for required for multiple units installed in the Lock and Sleeve Lock removable bollards. inclement weather. Easily installed using 4 x same location. D size batteries, no electrician required. 90mm Bollard Hangers Specifications: Specifications: Single - SKU: BOLHANG90S SKU: FDPLBOL Double - SKU: BOLHANG90D SKU: RCPARKLOCK Material: Galvanised steel Single and Double Bollard Hangers suitable Height when down: 75mm Finish: Yellow powder coating, C1 red ref band for hanging the Safety Xpress 90mm Key Height when raised: 390mm Height: 755mm when upright Lock and Sleeve Lock Removable Bollards. Size: 450mm x 450mm x 80mm Clearance Height: 90mm when folded down Remote Control range: 15 metres Diameter: 70mm 2 x Remote Controls included. Fixings: 4 included Security alarm. Mounting bolts included.

Fold Down Bollard / Parking Parking Bollard - Bollard - Protector Covers Space Protector 90mm 620mm high Protect your new bollards or revitalise your old bollards. When you’re sick of people parking in your This bollard will stop any carpark nuisance Easy to slide over the top of existing bollards parking spot, it’s time to act! Sturdy and attempting to park in your spot. This bollard and suitable for adding extra height to highly visible with its class 1 red reflective folds down to give you and your vehicle ac- shorter bollards to assist with visibility. band, this bollard stands out even in under- cess and then sits bolt upright and locks into cover areas where lighting can be dim. place with a key to protect your space. Specifications:

Specifications: Specifications: 100Mm Bollard Protector Cover SKU: BOLCOV100 SKU: FDBOLLARD SKU: PBOL620 Height: 1320mm (can be cut to size) Height (upright): 750mm (folded): 125mm Height (upright): 620mm Inside Diameter: 100mm Material: Galvanised steel Height (folded down): 100mm

Finish: Yellow powder coating, C1 red ref band Diameter: 63mm 152Mm Bollard Protector Cover Clearance: 90mm when folded down Material: Galvanised steel SKU: BOLCOV152 Diameter: 90mm Finish: Yellow powder coating Height: 1320mm (can be cut to size) Fixings: 4 included, 2 keys included Fixings: 4 included, 2 keys included Inside Diameter: 152mm 10 SAFETYXPRESS.COM.AU

Super Flexi Bollard Knock Down Bollard - T-Top Bollard - With 6kg base The Safety Xpress Super Flexi Bollard is used 2 Piece It’s the most popular fella on the road these days. The T-Top Bollard is made from Hi-Vis for traffic delineation creating a guide whilst Made from plastic (polyethylene), the flexible orange PVC with a reflective band around reducing the risk of any damage occurring to knock down bollards are a lightweight and it, this very useful and versatile bollard is the vehicle. easy to install bollard easily removed from called the “T” Top. Why the “T” Top you might Built from polyurethane the Super Flexi the base when access is required by using the ask? Well the top is in the shape of a T which Bollard will rebound to an upright vertical twist-lock system. Their flexible design allow makes it easy to grip, and makes it simple to position if a car knocks or drives over it. the bollard to take a good knock in all direc- wrap barrier tape between bollards. It doesn’t Secured in place by installing 3 fixings (sup- tions without causing damage to vehicles. plied) per bollard. weigh much and they stack well too. Specifications: Specifications: Specifications: SKU: FKD2PB SKU: TTOPBASE SKU: BOLSF75 Diameter: 100mm Height: 1150mm Diameter: 75mm Height: 1000mm Height: 750mm Base: 6.5kg Material: High Vis orange plastic Material: High Vis Polyurethane, UV stabilised Fixings: 4 included Fixings: 3 included

Hoop Top Bollard Impact Bollard - 90cm High Impact Bollard - Shared The “Hoop Top” has a distinctive hoop which Unique and exclusive to Safety Xpress, the Zone 1350mm High makes it easy to hang in your vehicle and Impact Bollard is manufactured from high The Surface Mount Shared Zone Impact Bol- easy to transport to and from work sites. grade TPU and is designed to flex on impact. lard has many applications but is specifically Also, you can thread barrier tape between Tested to withstand over 1000 impacts and designed for installation in shared zones in bollards (no need to wind around each top). 20 Tonne at 100kmh, our Impact Bollard can between disabled car parking spaces. This allows the tape to move through the be knocked or driven over by almost any The bollards flexibility reduces damage to vehi- bollards on windy days so they’re not as vehicle and will spring back to its original cles when navigating parking areas. The Shared prone to falling over. upright position without any crease or cracks. Zone Impact Bollard complies with car parking regulations and has a 20 Tonne impact rating. Specifications: Specifications: Specifications: SKU: HOOPTOP SKU: BOLCIT90 SKU: BOLCIT130 Height: 1150mm Material: Durable Thermoplastic Polyurethane Material: Durable Thermoplastic Polyurethane Base: 6.5kg Height: 900mm Height: 1350mm Diameter: 100mm Diameter: 100mm Colour: Yellow with class 1 reflective band Colour: Yellow with class 1 reflective band Fixings: 4 Included Fixings: 4 Included CALL 1300 049 246 11 TACTILE INDICATORS

Reinforced Fibreglass Reinforced Fibreglass Tactile Indicator Single Studs Directional Tactile 300 x 600 Hazard Tactile 300 x 600 - TGSI 25mm shaft This tactile has been cleverly designed using Engineered to successfully upgrade any The Safety Xpress Single Tactile Stud is made an ultra UV stabilised resin and is reinforced existing surface to comply with from a high grade polyurethane with increased with embedded fibreglass, resulting in a AS/NZS 1428.4.1:2009 mandated detectable strength and is UV stabilised so they won’t fade super strong product that will be durable warning requirements. Perfect for both the over time in the sun. Single stud tactiles are ideal for in even the heaviest pedestrian traffic areas. retrofitting of existing sites and new infra- use in smaller areas or where the surface presents a Installed using raw plugs and screws (sup- structure. Used to alert the visually impaired curve making tactile plates a hazard to use. Installed plied) and glue available separately. of environment changes. by drilling the surface with an 8mm drill bit.

Specifications: Specifications: Specifications: SKU: RFTACD600 SKU: RFTAC600 SKU: TGSIP25 Material: UV Stabilised Reinforced Fibreglass Material: UV Stabilised Reinforced Fibreglass Material: High Grade UV Stabilised Polyurethane Size: 300mm x 600mm x 2mm Size: 300mm x 600mm x 2mm Shaft: 25mm Available colours: Black, White, Yellow & Blue Available colours: Black, White, Yellow & Blue Colour: Yellow, Black, White, Red, Grey, Beige, Blue Fixings supplied Fixings supplied Installed using an 8mm Dril bit, no glue required Manufactured to AS/NZS 1428.4.1:2009 Manufactured to AS/NZS 1428.4.1:2009

Tactile Indicator ’Peel & Tactile Indicator ’Peel & Tactile Indicator Studs - Stick’ - TGSI Directional Tile Stick’ - TGSI hazard tile Polyurethane Bladed Shaft Peel off the backing from the Safety Xpress Peel A great “Do It Yourself” option with no need for Joined together and spaced like well-trained and Stick Polyurethane Tactile and you’re ready mixing messy epoxy resins. These tiles are sup- soldiers, these hazard warning tactiles (to to stick the tactile tile directly onto the surface. plied as standard with a convenient, aggressive Australian Standard) have bladed shafts to No need for glue, the sticky back is very ag- adhesive backing. Suitable for a variety of indoor install with ease. Use a concrete saw to cut gressive to most surfaces so get it right the first and outdoor surfaces and available in a range a groove and slide the tactiles blade base in time when you install them because they won’t of colours. Notifies visually impaired people of for a tight fit. Pretty simple and you’re done. be easy to move. hazards ahead, and approaching intersections. The bladed stud tactile is suitable for use in- doors and outdoors, for commercial carparks, Specifications: Specifications: footpaths and shopping centres. SKU: TGSIDPS SKU: TGSIHPS Material: High Grade UV Stabilised Polyurethane Material: High Grade UV Stabilised Polyurethane Specifications: Size: 300mm x 300mm Size: 300mm x 300mm SKU: STUDPBS Available colours: Black, White, Yellow, Grey, Available colours: Black, White, Yellow, Grey, Material: High Grade UV Stabilised Polyurethane Beige, Blue and Red Beige, Blue and Red Shaft: 14mm Manufactured to AS/NZS 1428.4.1:2009 Manufactured to AS/NZS 1428.4.1:2009 12 SAFETYXPRESS.COM.AU

Tactile Indicator Single Studs Tactile Indicator Single - TGSI Stainless Steel Concentric Studs - TGSI Stainless Steel The Safety Xpress TGSI hazard warning with Ribbed Shoulders stainless steel single stud tactile is suitable Warning indicators need to do their job for indoor or outdoor use and complies under all conditions and for all pedestrians. with Australian Standards. Designed for easy This Stainless Steel Tactile with Ribbed installation using the pressure fit sytem and Shoulders will provide the solution in both an 8mm drill bit. A flat conical edge presents indoor and outdoor environments. The an eye catching contrast to the concentric ribbed shoulders may provide extra traction surface across the expanse of installed for vision impaired users of implements such tactiles. A very refined look. as walking sticks and support canes. Specifications: Specifications: SKU: STUDSSCO SKU: STUDSSR Material: Stainless Steel Material: Stainless Steel Shaft: 14mm - Pressure fit system, install Shaft: 14mm - Pressure fit system, install using 8mm drill bit (no glue required) using 8mm drill bit (no glue required)

Tactile Indicator Single Tactile Indicator Single Studs - TGSI Stainless Steel Studs - TGSI Stainless Steel with Carborundum Insert with Poly Insert Individual Stainless Steel Tactiles with a Tactile Indicators are a support for the visu- carborundum insert provides extra grip in all ally impaired. In the digital world that we weather conditions. The carborundum sits live in they have also become a useful tool flush with the smooth collar edge of the tactile to warn walking users of devices that their ensuring a hard, grippy surface with a smooth environment is also about to alter and to refined finish and a degree of illumination. The alert them to roadways, steps and changes in best of both worlds! Use an 8mm drill bit and pathway levels etc. your tactiles are easily and quickly installed. Specifications: Specifications: SKU: STUDSSCA SKU: STUDSSSP Material: Stainless Steel Material: Stainless Steel Shaft: 14mm - Pressure fit system, install Shaft: 14mm - Pressure fit system, install using 8mm drill bit (no glue required) using 8mm drill bit (no glue required) CALL 1300 049 246 13

316 Stainless Steel Tactile 316 Stainless Steel Tactile Tactile Indicator Single Studs Plate with Carborundum Insert Plate Classic - TGSI 25mm shaft The most stylish tactile in our range. The Just take a look at these! The Stainless The SBD34 Skateboard Deterrents are manu- Stainless Steel Tactile Plate with Carborundum Steel Tactile Plates give a distinguished and factured from 316 Marine Grade Stainless Steel Inserts not only looks great but it is also hard uniformed look without all the extra work and will blend in with most architectural designs wearing and designed to last. Manufactured of single stud applications. Ready to take on whilst doing their job to prevent damage caused the hardest of traffic areas and manufactured from polished 316 Marine Grade Stainless by skateboard, inline skaters and bmx grinding. from 316 Marine Grade Stainless Steel, these Steel these tactiles plates are easy to install tactiles will keep their good looks even at with just 4 fixing points per 300 x 300 tile. beachside locations. Add an upmarket look Specifications: today and wait for the whistles! SKU: SBD34 Specifications: Specifications: Material: 316 Marine Grade Stainless Steel SKU: TACSSPCAR3 Diameter: 34mm SKU: TACSSPCLA3 Material: 316 Marine Grade Stainless Steel Height: 5mm Material: 316 Marine Grade Stainless Steel Size: 300mm x 300mm Shaft: 20mm x 5mm Size: 300mm x 300mm Fixings: 4 included per tile Suggested spacing: 500mm - 700mm (maximum) with Fixings: 4 included per tile Manufactured to AS/NZS 1428.4.1:2009 150mm from ends & approx 30mm in from edge. Manufactured to AS/NZS 1428.4.1:2009

Tactile Indicator Single Stud Surface Primer - Adhesive Template 1200 x 600mm Polyurethane adhesive used in conjunction Used for installing individual tactile studs. with the Peel and Stick Tactile. Recommended for use when installing The template makes the job even easier by guiding you so that you can keep the tactiles tactiles to porous surfaces such as trowled spaced at the regulation distance apart, and concrete. in clearly defined lines. Chuck away your tape measure and builders chalk and grab Specifications: one of these instead! SKU: SPRIME700 Size: 700g Specifications: 1 Tube will prepare surface for SKU: TSTUDSTEN 8 tiles (300x300) Material: Hard wearing plastic Size: 1200mm x 600mm 14 SAFETYXPRESS.COM.AU STAIR NOSINGS

Anti-Slip Tape - 10m Roll Anti-Slip Tape - 10m Roll Anti-Slip Tape - 10m Roll Reduce risk of slips, trips and falls in and This easily applied tape offers high visibility Utilising the peel and stick technology, this around the workplace with this anti-slip and a convenient solution to prevent falls, hazard tape is a highly durable solution to your tape 50mm wide x 10m long. A coarse slips and accidents. Perfect for when the safety requirements. Complete with a strong surface ensures maximum grip even in heavy edge of steps seem to visually disappear into adhesive to stay put under testing conditions, traffic and wet or greasy conditions. Achieve each other by creating a definition to each the striped pattern screams, “Hazard – Watch maximum anti-slip protection whilst warning edge. It is easily installed and you can simply Out!” Perfect for use in the workplace on ladders of dangerous areas. cut to your required lengths. Provide protec- and where employees are working at height. An Can be used throughout all areas of your tion at your workplace or your home with our easily identifiable pattern that is an industry facility on stairs, ramps, steps, entrances non-slip tape in safety yellow. standard. and exits. Specifications: Specifications: Specifications: SKU: ASLIP10Y SKU: ASLIP10YB SKU: ASLIP10B Colour: Yellow Colour: Yellow/Black Colour: Black Length: 10 metres Length: 10 metres Length: 10 Metres Width: 50mm Width: 50mm Width: 50mm

Aluminium - Rubber Insert Aluminium - Rubber Insert Aluminium - Tough Anti Slip 10mm Compliant Bullnose 30mm Face 10mm Bullnose This stair nosing has a 10mm Bull Nose face Our aluminium stair nosings are manu- Able to manage the harshest of conditions and a rubber insert. Available in 3 colours – factured from non-corrosive, high quality and ideal for heavy traffic areas. This 3mm Black, Yellow and Grey. Recommended anodised aluminium. They provide a fast, thick carborundum insert is an all-weather for general indoor & outdoor environments permanent anti-slip surface to the front edge grip packaged in an attractive stair nosing. It in low to medium traffic areas. Can be -in of all types of stair surfaces. The insert is can be installed with glue or fixed into place using screws onto a variety of substrates. You stalled with glue or fixed in place using screws available in Black, Yellow and Grey and won’t find a tougher more durable stair tread. onto a variety of substrates including timber creates a streamlined finish to add a refined Australian Compliant and a popular choice concrete, bitumen, tiles, and vinyl rubber. look to any set of stairs. for new buildings of all descriptions. Specifications: Specifications: Specifications: SKU: RUB7510 SKU: RUB7530 SKU: TAS7510 Length: Cut to size Length: Cut to size Length: Cut to size Size: 75mm x 10mm Size: 75mm x 30mm Size: 75mm x 10mm Insert Colour: Yellow, Black or Grey Insert Colour: Yellow, Black or Grey Insert Colour: Yellow or Black Australian Compliant - Manufactured to AS/NZS 1428.1 Australian Compliant - Manufactured to AS/NZS 1428.1 Australian Compliant - Manufactured to AS/NZS 1428.1 CALL 1300 049 246 15

Aluminium - Super Anti Slip Aluminium - Super Anti Slip Aluminium - Black Anodized 30mm Face 10mm Bullnose All our stair nosings are available in a shiny Rounded faced steps are no problem with the This stair nosing offers a solid aluminium black annodised aluminium option. This 30mm Super Anti Slip Aluminium Stair Nos- extrusion with either Yellow or Black carbo- includes the Super Anti Slip 10mm or 30mm, ing. Designed with awkward and tricky to fit rundum inserts for real grip and anti-slip. Aluminium With Rubber Insert 10mm or 30mm edges in mind, this extrusion slides into place Able to be screwed or glued into position. and Tough Anti Slip. and creates a neat finish where others fail. Ideal for educational institutions, industrial Adaptable to numerous types of stairs and applications, office areas, restaurants/eateries, materials with low to medium traffic flow for shopping centres and sports facilities. both indoor and outdoor areas. Specifications: Specifications: Specifications: SKU: SASBA7510, SASBA7530, TASBA7510, SKU: SAS7530 SKU: SAS7510 TASBA7530, TASBA7510 Length: Cut to size Length: Cut to size Length: Cut to size Size: 75mm x 30mm Size: 75mm x 10mm Size: 75mm x 10 or 30mm Insert Colour: Yellow or Black Insert Colour: Yellow or Black Insert Colour: Yellow, Black, Red or Grey Australian Compliant - Manufactured to AS/NZS 1428.1 Australian Compliant - Manufactured to AS/NZS 1428.1 Australian Compliant - Manufactured to AS/NZS 1428.1

Aluminium - Securatread Aluminium - Flat 50Mm FRP - Fibreglass Reinforced Corrugated The Securatread anodised aluminium Plastic corrugated stair tread is 50mm wide and This corrugated stair nosing has a 10mm front Industrial fibreglass reinforced plastic stair and is recommended for general indoor and is recommended for general indoor and nosing is hard wearing and suitable for high outdoor environments with medium to high outdoor environments with medium to high traffic areas including access stairs and plat- traffic areas. These stair nosings glue down traffic areas. These stair treads are a surface forms in marine, mining and factory environ- easily onto a variety of surfaces. Available in mount system and glue down directly onto a ments. Due to its extremely hard grit surface it provides an aggressive non slip surface either Black or Natural aluminium. variety of substrates. even in wet, oily, greasy or dusty environ- ments. An impressive stair nosing! Specifications: Specifications: SKU: STC10B - Black Specifications: SKU: STC10N - Natural SKU: STFLAT50B SKU: FRPSN Length: Cut to size Length: Cut to size Length: Cut to size Size: 55mm x 10mm (Aus Compliant) Size: 50mm x 3mm Size: 75mm x 10mm Australian Compliant - Manufactured to AS/NZS 1428.1 Colour: Black 75mm x 30mm Australian Compliant - Manufactured to AS/NZS 1428.1 150mm x 30mm 230mm x 30mm 16 SAFETYXPRESS.COM.AU 16 WHEEL STOPS

Ultimate Wheel Stop Ultimate Wheel Stop Polyethylene Wheel Stop Exclusive to Safety Xpress and manufactured Disabled Blue Our polyethylene wheel stops are built to from strong recycled rubber material, this The matching accessory to disabled mark- last. They are UV stabilised and therefore will wheelstop is robust, durable and tough to ings and signage in disabled bays and park- not fade. Unlike concrete wheel stops our withstand our Australian conditions. Will not ing areas. Clearly indicates designated bays poly wheel stop will not crack over time. rot, crack or rust. Complies with Australian for permit parking. Part of the ‘Ultimate’ One of the most durable wheel stops on the Standards AS2890.1:2004. range, manufactured to high specifications market to suit all a pplications. Available in and exclusive to Safety Xpress. Safety Yellow, Disabled Blue and Grey. Specifications: SKU: RUBWSULT Specifications: Specifications: Material: High Strength Durable Rubber SKU: WSTOPDBL SKU: WSPOL Height: 100mm Material: High Strength Durable Rubber Material: Polyethylene (LLDPE) Length: 1650mm Height: 100mm Height: 100mm Width: 150mm Length: 1650mm Length: 1650mm Fixings: 3 Fixings for concrete or asphalt inc Width: 150mm Width: 150mm 2 Year Structual Warranty Fixings: 3 Fixings for concrete or asphalt inc Fixings: 3 Fixings for concrete or asphalt inc 2 Year Structual Warranty 2 Year Structual Warranty

Truck Wheel Stop 900mm Rubber Wheel Stop Wheel Stop Fixings Our solid recycled plastic wheel stop is Specifications: designed for truck parking in any situation SKU: WSTOP900 Concrete Fixings: including petrol stations, rest stops and Height: 100mm SKU: WSTOPFIX truck stop parking bays. These wheel stops Length: 900mm M10 Screw 150mm are also suitable for recreational vehicles Width: 150mm M10 Washer and 4WD and caravan combinations. Fixings: 2 Included 14mm Nylon plug

Specifications: Asphalt Fixings: SKU: WSTRUCK 500mm Wheel Stop SKU: ROADSPIKE Height: 150mm Specifications: 300Mm long corrugated road spike Length: 1250mm (2 together form 2.5m) SKU: WSTOP500 Width: 150mm Height: 100mm Fixings: 4 Included Length: 500mm Width: 150mm Fixings: 2 Included CALL 1300 049 246 17 WHEEL STOP INSTALLATION GUIDE

1. Read all the instructions from beginning to end first. 2. Determine exactly where the wheel stop will be placed. See our handy chart below for the Australian Standards (AS2890.1:2004) 3. Put the wheel stop where it will go and using your hammer drill, drill a guide hole in the concrete through each hole in the wheel stop using the 14mm masonry drill bit. (This is to mark the surface so that you know where to continue to drill). 4. Remove the wheel stop and brush or vacuum away the concrete dust. 5. Continue to drill each guide hole to an approximate depth of 120mm. 6. Brush or vacuum away the concrete dust. 7. Put the plastic plug component of the fixing in the drilled hole and hammer in. 8. Place the wheel stop over the holes, line up and place the supplied M10 screw through the wheel stop and into the plastic plug. 9. Use your 17mm socket to tighten the M10 screw. For a seamless installation, ensure your wheel stops are placed on a flat surface.

Safety Xpress recommends you put the safety of yourself and others first when installing your wheel stops. Please be mindful of using and wearing the correct safety gear.

620mm 900mm

Front into a low kerb Rear into a low kerb Measure from front of the wheel stop where wheel makes contact Measure from front of the wheel stop where wheel makes contact

820mm 1100mm

Front into a wall Rear into a wall Measure from front of the wheel stop where wheel makes contact Measure from front of the wheel stop where wheel makes contact 18 SAFETYXPRESS.COM.AU CONVEX MIRRORS

Convex mirror - Indoor Convex mirror - Indoor Convex mirror - Indoor 450mm 600mm 800mm Convex mirrors are commonly used for se- The use of mirrors for safety is now widely Convex safety mirrors allow for up to 180 curity and safety reasons to overcome sight accepted in pedestrian conflict areas. They degrees of vision, and can be used to view restriction problems in visibility deficient assist people in seeing hazards and thus at an angle to reduce accidents around blind areas. Suitable for retail applications. prevent collisions. Busy office areas benefit corners and doorways. Effective when view- Visibility Coverage: Approx 5.5m from clear visibility for safety and security. ing aisle traffic in a storeroom or warehouse. Visibility Coverage: Approx 7m Visibility Coverage: Approx 9.5m

Specifications: Specifications: Specifications: SKU: CONMIRID450 SKU: CONMIRID600 SKU: CONMIRID800 Diameter: 450mm Diameter: 600mm Diameter: 800mm Material: Polycarbonate face Material: Polycarbonate face Material: Polycarbonate face 60mm Post mount bracket included 60mm Post mount bracket included 60mm Post mount bracket included Wall mount brackets sold separately Wall mount brackets sold separately Wall mount brackets sold separately

Convex mirror - Outdoor Convex mirror - Outdoor Convex mirror - Outdoor 450mm 600mm 800mm The purpose of the convex safety mirror is These mirrors are useful in factory areas Dust and road grime can significantly reduce to indicate to the road user, the presence or where foot and forklift traffic can cross a mirror’s effectiveness, particularly if pro- absence of a moving or stationary vehicle paths, in warehouses where blind intersec- vided on or near unsealed roads. This mirror and/or pedestrian. The mounted visor keeps tions and corners exist and at service station is fitted with a visor at its top to prevent the the mirror free from rain residue, dust and locations where individuals need to view accumulation of dust on the mirror surface. bird droppings. normally blocked access areas. Visibility Coverage: Approx 9.5m Visibility Coverage: Approx 5.5m Visibility Coverage: Approx 7m Specifications: Specifications: Specifications: SKU: CONMIROD800 SKU: CONMIROD450 SKU: CONMIROD600 Diameter: 800mm Diameter: 450mm Diameter: 600mm Material: Polycarbonate face Material: Polycarbonate face Material: Polycarbonate face 60mm Post mount bracket included 60mm Post mount bracket included 60mm Post mount bracket included Wall mount brackets sold separately Wall mount brackets sold separately Wall mount brackets sold separately CALL 1300 049 246 19

Convex mirror - Outdoor Convex mirror - Indoor Convex mirror - Indoor 1000mm Security Black 450mm Security Black 600mm The larger the radius of curvature the lesser When positioned appropriately, security mir- Ideal for high security applications where the distortion in a convex mirror. Road users rors alert personnel of danger or theft. Using surveillance and observation is of paramount more easily see larger diameter mirrors. mirrors to help provide a safe and secure importance. These mirrors also provide a bigger field of work environment is good practice. Visibility Coverage: Approx 7m view, enabling the oncoming traffic to be Visibility Coverage: Approx 5.5m more easily seen. Visibility Coverage: Approx 12m Specifications: Specifications: SKU: CONMIRIDB450 SKU: CONMIRIDB600 Specifications: Diameter: 450mm Diameter: 600mm SKU: CONMIROD1000 Material: Polycarbonate face Material: Polycarbonate face Diameter: 1000mm 60mm Post mount bracket included 60mm Post mount bracket included Material: Polycarbonate face Wall mount brackets sold separately Wall mount brackets sold separately 60mm Post mount bracket included Wall mount brackets sold separately

Convex Mirror Wall Mount Full Dome Mirror - 660mm Full Dome Mirror - 800mm Bracket Dome safety and security mirrors offer a Dome mirrors are effective when used to Convex mirrors can be mounted securely panoramic view of an area. Typically for view wide areas. A dome mirror lens is indoor use, dome mirrors help eliminate curved more than the convex mirror lens. to a pole, wall or other high point to deter vandalism. Mirrors can be positioned at any blind spots and increase visibility at a The curvature allows for a wider angle of angle and then secured in place. broader angle. vision. Dome mirrors provide an infinite Visibility Coverage: Approx 37m2 reflection. Specifications: Visibility Coverage: Approx 42m2 Specifications: SKU: CONMIRWM SKU: DOME660 Specifications: Material: Galvanised Steel Diameter: 660mm SKU: DOME800 Material: Polycarbonate face Diameter: 800mm Material: Polycarbonate face 20 SAFETYXPRESS.COM.AU SPEED HUMPS & RAMPS

Speed Hump - Speed Hump - 50 Tonne Speed Hump - Rubber Compliant Our 50 Tonne speed hump is made from Ultimate 100 Tonne Slow down speeding drivers especially where Our 50mm high Australian Compliant Speed a high strength nylon plastic designed for people and vehicles share the same space. Our Hump will slow traffic and do the job. Bright durability which won’t chip, rust or crack. “Ultimate” Heavy Duty Speed Hump will slow Yellow and Real Black, our rubber speed ’Clip Together’ design for easy bolt down traffic and they look good too. Designed with humps are easily installed with all the neces- D.I.Y. installation. our exclusive, unique ‘honeycomb’ configuration sary fixings supplied. Specifications: base for extra strength. The weight load capacity is a huge 100 tonne at a speed of 30km/h or less. Specifications: SKU: SHUMP50T Material: Rubber SKU: SHRUBCOM Specifications: Material: Rubber Height: 40mm SKU: SPHUMP100 Length: 500mm Height: 50mm Material: U.V. stabilised composite plastic Length: 250mm Depth: 320mm Height: 50mm Depth: 360mm Load Capacity: 50 tonne Length: 250mm Fixings: 4 included per section Depth: 350mm Load Capacity: 100 tonne Fixings: 2 included per section Fixings: 2 included per section 5 Year structural warranty

Speed Hump - Steel Cable Protector - Cable Protector Large - Heavy Duty Steel Speed Humps come in 1 5-Channel 30 Tonne 65mm 3-Channel 30 Tonne metre modules and are installed alongside Used to secure cables and eliminate trip Non slip design. Suitable for cables or pipes each other to form the speed hump length hazards for pedestrians accessing the area. up to 65mm in diameter. Ideal for backstage that you require. Can be used in outdoor, indoor, on work sites, situations where combinations of cables are conference rooms, offices and more. required. Creates a surface that trolleys can Specifications: Sections connect together to make up the be wheeled over safely. SKU: SHSTEEL1M protection length required. Material: Hot dipped Galvanised steel Specifications: Height: 55mm Specifications: SKU: CABPRO3PU SKU: CABPRO5PU Length: 1000mm Material: Polyurethane Material: Polyurethane Depth: 360mm 3 Channels: 65mm High, 65mm Wide 5 Channels: 42mm High, 42mm Wide Fixings: 8 included per section Length: 900mm Length: 900mm Width: 500mm Width: 500mm Height: 75mm Height: 55mm Load Capacity: 30 tonne Load Capacity: 30 tonne CALL 1300 049 246 21

Roundabout - Modular Speed Cushion Rubber Kerb - Modular Traffic Available in Terracotta or Black and White, Made from G2 Recycled Rubber and White Island the Modular Roundabout is made from piano keys from EDPM Rubber. Features built Made from 100% recycled rubber, the 100% recycled rubber and designed for in Cat’s Eye reflectors and Dog & Bone link- Modular Rubber Kerb system is designed to quick and easy installation. The 1m sections ing system for easy installation. suit most applications. Suits a variety of infill link together to form a roundabout which is options proving to be a long lasting and cost- bolted directly into the road surface. Specifications: effective solution. Easily installed. SKU: SPCUSH16, SPCUSH17, SPCUSH18 Specifications: SPCUSH19, SPCUSH20 Specifications: SKU: MODROUND Height: 75mm SKU: RKERBS1000 Length: 1000mm Length: 2000mm (2mtrs) Can increase in Height: 75m Lengths: 1000mm straight Diameter: As required (6M has 40 segments) travel distance in 500mm increments Cost effective, minimal traffic disruption. Width: Variable (Modular) SKU: RKERBR300 Half a day to install. Variety of infill options Gradient: Side edge 1:4 Height: 75m Radius: 300mm available. Gradient: Leading and trailing 1:8 SKU: RKERB500 Vic Roads Approved Height: 75m Radius: 500mm

Trench Cover Kerb Ramp Portable Kerb / Uncovered pits, trenches and manholes are Designed to make life easier when access- Wheelchair Ramp dangerous and need to be covered up ing areas over a concrete kerb such as hard Made from lightweight moulded plastic immediately with a Safety Xpress Safety to reach driveways. Can be used separately and has a reinforced steel backing for extra Trench Cover to ensure a safe workspace, or joined together to form a longer ramp. construction site or safe public access is main- support. It is designed for use on kerbs Can be positioned freestanding and moved tained. Around construction sites, there are al- and steps. Ideal for wheelchairs and hand around as necessary. Fixings for installation ways trenches, pits, holes and other potential trolleys wanting to gain temporary access to included. obstacles that should be covered. Designed elevated areas and suitable for any work- primarily for use in street works, suitable for place, care facilities, public events, sporting trenches or pits up to 700mm wide. Specifications: carnivals and use around the home. SKU: KERBRAMP Specifications: Height: 100mm Specifications: SKU: TRENCH12080 Width: 480mm SKU: WCRAMP Length: 1200mm Depth: 420mm Length: 700mm Width: 800mm 2 x Fixings included Width: 1300mm Depth: 44mm Height: 130mm Load Limit: 500kg Load limit: 300kgs 22 SAFETYXPRESS.COM.AU BARRIERS

Expanding Barrier 3 metre Expanding Barrier 3 metre Foam Impact Protection Steel With Locking Wheels Steel With Locking Wheels Corner Strips This Expanding Barrier s-t-r-e-t-c-h-e-s to 3 metres! The expanding barrier comes complete with Designed to lessen the impact and to warn Just pull it out to your required length. The barrier locking castor wheels which makes it easy of protruding corners, edges and vulnerable is made from high quality steel and aluminium to move around or to pull in and out. It can pipes. Used to protect many other assets ensuring it is tough enough to stand up in any be locked into place creating a temporary such as walls, vehicles, and machinery. workplace environment. You can fix it to the sur- barrier to define areas. The side hooks attach face or put a weight on the legs to hold it firmly in place. The design accommodates two or even three to the next barrier creating a lengthy barrier. expanding barriers to fit together to form a 6 metre Perfect for large areas like warehouses and Specifications: or 9 metre barrier if extra length is required. pedestrian areas. SKU: IMPPROCORN Material: Polyurethane Foam Specifications Specifications Length: 1 metre SKU:EXPBAR3M SKU: EXPBAR3MW Width: 40mm Length: 3 metres Length: 3 metres Opening width: 20mm x 20mm Height: 980mm Height: 1000mm Material: Steel and aluminium Wheels: Castor locking wheels included Finish: Yellow and Black powder coat Material: Steel

Wall Mounted Retractable Cone-Top 9m Retractable Chain Kerb / Low Barrier Barrier - 9 metre Tape Barrier Blocks The Wall Mounted Retractable Belt Barrier, The Cone Top 9m Barrier is an effective Chain Kerb consists of 400mm Yellow and also referred to as crowd control barriers are solution to quickly and effectively cordon off Black sections which link together to form a designed to help alert visitors to hazardous hazardous or restricted areas. It can be used continuous edge or kerb. Ideal to use as a pe- areas that should not be entered. An extra by fitting to the top of a traffic cone or Skipper rimeter marker along chevron areas and it can long 9 metre belt ensures this unit can be post. No need to waste barrier tape when you be formed into almost any shape. When fixed used in almost any area, and the spring have one of these. This barrier can also be on concrete, Chain Kerb is extremely strong design maintains a taut belt no matter what wall mounted using the Wall Mount Bracket. and durable. It’s UV stable and easy to work length it is extended to within the 9m range. The barrier can be connected to another unit with because of its light weight structure. Wall mount receiver is included. or to a wall using the Wall Mount Receiver. Specifications: Specifications: Specifications: SKU: CHAINKERB SKU: WMBAR9YB SKU: 9MCTRTAPY Length: 500mm Belt Length: 9 metres Width: 50mm Belt Length: 9 metres Width: 50mm Width: 135mm Belt Colour: Yellow and Black or Red and White Colours: Yellow and Black or Red and White Height: 170mm Material: Unit - ABS Plastic Belt - Woven Nylon Material: Unit - ABS Plastic Belt - Woven Nylon Material: UV stabilised durable plastic.

CALL 1300 049 246 23

Guardrail Corner Protector Docking Bumper An asset protection system suited for Rubber Corner Protectors are easily installed Designed for loading docks to be attached factories and warehouses to prevent damage on car park walls, columns and building to the facing wall to the reversing trucks to to equipment and machinery from forklifts corners to prevent vehicles scraping when absorb impacts without causing damage to and trucks. Also used to protect staff along navigating tight car parks. Can be screwed structures or vehicles. The damage avoiding walkways and working zones. Easy to assem- and/or glued into place.Corner protectors are barrier that will protect the infrastructure of ble and install, easy to modify. also suitable for use on machinery to cover the building. We can supply lengths, bullnose ends, posts sharp corners. with base plates and fixings to get your specific job done!

Specifications: Specifications: Specifications: Material: Galvanised steel SKU: CRNPROTCT SKU: DOCBUMP Various lengths and legs available, see website Height: 800mm Material: Rubber for options. Width: 90mm x 90mm Length: 900mm Material: Rubber with yellow reflective panels Width: 150mm Height: 150mm

Steel Column Protectors Column Protector Racking Guard Protector This heavy duty Column Protector is ideal This lightweight column protector option Stop impacts at the base of pallet racking. for warehouses to guard columns from colli- provides strength and durability. Nylon vel- This guard is easily fixed to the floor through sions caused by trucks and forklifts or in ar- cro straps allow breakaway ability and easy the four fixing points. Protect your racking, eas where there is movement around or near installation. These protectors are rust proof and therefore your stock, from accidental structural columns. These beauties could and cold weather impact resistant in Safety forklift or vehicle impacts. save you thousands and this heavy duty Yellow. They suit round or square columns up protector can take a serious knock. Available to 250mm wide. in 500mm, 750mm and 1000mm radius. Specifications: Specifications: SKU: RACKG15530 Specifications: Depth: 150mm SKU: COLPRO900 SKU: COLPRO500, COLPRO750, COLPRO1000 Width: 155mm Outer Diameter: 610mm Height: 450mm, 750mm or 1000mm Height: 300mm Inner Diameter: 250mm Material: Galvanised Steel Material: Powder coated steel Material: Linear Low-density polyethylene Colour: Safety Yellow (LLDPE) 24 SAFETYXPRESS.COM.AU TEMP FENCING

Crowd Control Barrier Portable Plastic Fence U-Bar Hand Rail The Crowd Control barrier is used to tempo- Barrier The U-bar Hand Rail is a “handy” addition rarily zone off areas at public events, work This barrier clips into a heavy 22kg solid to our range. It can be used in conjunction sites or in the work place. Easily installed rubber base so it won’t fall over or blow away with our Safety Handrail, or it is perfectly by linking the panels together. Feet can be in windy conditions. It is a durable long lasting capable of creating a barrier on its own. Can be installed at the entrance to a building or removed for simple transport and storage. barrier designed for outdoor use. Can be easily stored by stacking on top of each other. This shopping centre to divert pedestrian traffic The Crowd Control Barrier can be secured and provide them with stability or support to unit is ideal for sectioning off dangerous or in place if required using a steel spike or a prevent slips or falls. The U-bar Hand Rail can permanent fixing. hazardous areas. Single barriers can be linked also create a lengthy barrier within ware- together to form a variety of configurations. house or industrial environments by being Specifications: installed end to end. Specifications: SKU: CROWD22 SKU: PORTBAR110 Panel Size: 2200mm (L) x 1100mm (H) Specifications: Frame: 25mm O.D. Material: High density polyethylene Infill Pickets: 20mm O.D. - 200mm spacings Height: 1000mm SKU: UBD100SMG Weight: 18.5kgs Length: 110mm Material: Galvanised steel Finish: Galvanised steel Base: 26kg heavy duty rubber material Width: 1000mm Height: 1040mm Feet: Flat feet - removable Colour: Available in Yellow or Orange Mid Rail height: 550mm

Orange Barrier Mesh Star Picket 1650mm Star Picket Caps 50m Roll Pack of 10 Box of 50 Re-useable orange barrier mesh fencing used Safety Xpress star pickets/star posts are Maintain workplace safety by fitting Safety to block off work zones and dangerous haz- black tar dipped with pre drilled holes for Xpress Star Picket Caps to your fence posts, ards. Can be attached to star pickets through fixing Wire, Temporary Fence, Barrier Mesh reo bars and star pickets. Supplied in Safety the holes in the webbing. It is strong and or Bunting. Strong and long lasting, these Yellow for optimal visibility. durable, allowing the wind to blow through pickets are a worthy investment and will be Supplied in a box of 50 it, minimising blow overs. When you are re-used time and time again. finished with it, simply roll up and store out

of the way for next time. Available in a 4kg or

8kg, 50 metre roll. Specifications: Specifications: Specifications: SKU: STARPICK1650 SKU: STARPICAP SKU: BARMESH50-4KG, BARMESH50-8KG Star Picket Size:1650mm Material: UV stabilised Yellow polyethylene Material: Orange LDPE plastic Finish: Black Tar Dipped Holes: 14 holes per picket Length: 50 metre roll Pack Size: 10 pickets Height: 1 metre CALL 1300 049 246 25

Plastic Safety Chain Bunting Orange Safety Flag Barrier Tape Red & White 6mm - 25m Roll 30m Roll 50M Roll The Safety Xpress Hi Vis Orange Barricade Red and White Barrier Tape can be used Our huge 25 metre roll of UV Stabilised Yel- Bunting Flags are ideal for use with T-Top to temporarily barricade off work zones or low Plastic Safety Chain is used to zone off Bollards to temporarily zone off work zones dangerous areas from pedestrian traffic, areas using T-Top Bollards, Hoop Bollards or and potential hazards. Also useful to draw blocking access to a pathway. Easily unrolled, Fixed Bollards with chain rings installed. It’s attention to places such as car yards, markets unsafe areas can be cornered off in a prompt, even useful to have around to fix between and outdoor areas. no fuss manner. Recommended to be used pallet racking posts to stop access to aisles in in conjunction with our T-Top Bollards or our warehouses. A very handy roll indeed! Hoop Top Bollards.

Specifications: Specifications: SKU: PLCHA825 SKU: BUNTDAY30 Specifications: Chain Thickness: 8mm Material: Nylon rope with UV Stabilised High Vis SKU: BARTAPERW50 Chain Length: 25 metres orange flags Length: 50 metres Colour: Yellow Length: 30m roll Width: 75mm Flag size: 180mm x 230mm x 230mm

SAFETY RAIL

Modular Safety Rail Modular Safety Rail Ball Fence Yellow Galvanised The Ball Fence can be installed to extend Here’s a fence which comes together like Easily installed due to its modular design. existing or damaged safety railing. Consist- meccano. Easy to join, adjust and fix to floors, ing of a top (hand) rail and a bottom (knee) our Safety Rail Fence is top of the class This safety rail can be disassembled at a later the ball fence will suit most applications. when it comes to Safety Fence. Supplied stage and reinstalled in alternative in sections, this allows you to run lengths configurations as your workplace grows or Posts are available for either below ground where required to keep people and vehicles workflow changes. With a wide range of or surface mount installation. Our Ball Fence separate. The upright posts allow the rail to fittings available, this railing system can is made of galvanised steel and can be be connected with ease, just an Allen key adapt to almost any situation. installed to extend existing safety rail or to required. Tighten the grub screws and you’re replace sections of damaged railing. done. Brackets, joiners and fixings complete

the fence. Specifications: Specifications: Specifications: Height: 1017mm ground to centre of handrail Post - 48.3mm OD (40mm nb) Diameter: 40nb Diameter: 40nb Handrail - 42.4mm OD (32mm nb) Material: Galvanised steel powdercoated Material: Galvanised steel Kneerail - 33.7mm OD (25mm nb) Safety Yellow Material: Galvanised steel 26 SAFETYXPRESS.COM.AU SIGNS AND FITTINGS

Traffic Signs Safety Signs Sign Posts / Caps Safety Xpress can supply a variety of Safety in the workplace is supported by the Galvainised posts perfect for mounting most traffic signage for car parks, workplaces and use of proper signage which warns against traffic signs or convex mirrors are available in roadways. Custom signs are also available in potential hazards and instructs or directs different lengths. The galvanised cap clips on metal and corflute to suit your needs or are vehicles to maintain a safe environment. We the top of the post to give a finished look and manufactured to VicRoads Requirements. have a variety of PPE signage for workplaces to stop the post filling with debris and water. and roadways. Custom signage is also avail- able if you require a sign that is outside of Specifications: our standard range. SKU: SIGNPGAL28 Diameter: 60mm Length: 2.8 metres SKU: SIGNPGAL32 Diameter: 60mm Length: 3.2 metres SKU: SIGNPCAP Diameter: 60mm

Height Clearance Bar Signpost Sleeves Sign Bracket Surface Mounted Sleeve You will need these aluminium brackets for Height Clearance Bar with hangers. Designed SKU: SIGNSLSM fixing standard signs to Gal posts. Usually to protect the structural integrity of undercov- Fix a Gal Post (50nb) to concrete instead 2 brackets will be required for each sign on er parking areas and the like by providing a of core drilling. The base plate has 4 fixing the post. They have a tightening screw which warning for vehicles who try to enter who are holes pre drilled for bolting into the surface. keeps the sign firm and straight on the post. over-sized. These clearance bars are designed The sleeve has a slot for the key wedge to move with the force of the vehicle. Custom which keeps the post nice and straight. Specifications: clearance height stickers also included. Please Single Bracket specify the clearance height that is required In Ground Sleeve (Wizard) 450mm SKU: TD1 on the height bar. Available in 2m, 3m, and 4m SKU: IGWIZ450 Suits standard 50mm nb posts lengths. Fitted with chain rings ready to hang. Manufactured from steel and then galvanised. It has 4 blades below the ground to stop Double Bracket Specifications: the post (50nb) from twisting. You’ll need a SKU: TD2 SKU: HCBAR2M, HCBAR3M, HCBAR4M sledge hammer to knock the Wizard into the Suits standard 50mm nb posts Material: Galvanised Steel, powder coated Safety Yellow ground. It comes with a key wedge which Length: 2 metres, 3 metres, 4 metres slides down the gap to keep the post in place. Clearance height stickers included CALL 1300 049 246 27 SAFETY CONES

Traffic Cone 450mm- Traffic Cone 710mm- Traffic Cone 1m- Made from durable UV stabilised premium This high quality 710mm Traffic Cone is Towering above the other cones, this Safety quality PVC material. The 450Mm Traffic suitable for use on highways. Fit with a Cone is 1000mm high. Used in conjuction Cone is used in the workplace or low speed 250mm white reflective band this cone can with the Cone Top 9m Retractable Tape rural roads to indicate working zones and be used at night time. Barrier or cone bar to zone off dangerous dangerous hazards. areas. The 1m High Safety Cone with white reflec- Specifications: Specifications: tive sleeve and heavy duty 6kg base will re- SKU: CONE450R SKU: CONE710R sist blowing over and accidental knocks. The Height: 450mm Height: 710mm extra height allows for maximum visibility. Material: PVC Material: PVC Reflective Band: Class 1 reflective band Reflective Band: Class 1 reflective band Specifications: 150mm high for night time visibility. 250mm high for night time visibility. SKU: CONE1M Complies with AS/NZS 1906.1:2007 Complies with AS/NZS 1906.1:2007 Height: 1000mm Material: Polyethylene, High-Vis orange Reflective Band: 250mm high

Caution Wet Floor Retractable Cone Bar Reflective Tape Class 1 4 Sided Cone / Blank Yellow 1.3M - 2.5M Class 1 Red Reflective Tape is commonly applied to structures that are potentially Highly visible, bright Yellow, four sided hazard The Retractable Cone Bar is made of durable hazardous at night time. protection safety cone with ”CAUTION WET ABS plastic with alternating Black and Yellow FLOOR” wording and symbol displayed on stripes. It is designed to extend and retract to Suitable for indoor or outdoor use. It will all four sides. Used to warn against wet floor join traffic cones together to form a physical last up to 10 years in outdoor environments. hazards. Optional 6kg Rubber Base available barrier used to temporarily block off work This tape is up to 3 times brighter than class to reduce movement and prevent the cone zones or hazardous areas. Suitable for use 2 tapes. from being knocked over easily or blowing with any of our Traffic or Safety Cones. over when used in outdoor conditions. Also available blank without caution warnings. Specifications: Specifications: Specifications: SKU: CONEBAR25 SKU: REFTC1RED45 SKU: 4SYCONEWF Colour: Black and Yellow for visibility Length: 45.7 metre roll Model: Caution Wet Floor 4 sided cone Length: 1.3m to 2.5m Width: 38mm Material: Tough Plastic Colour: Red Height: 890mm high Rating: Class 1 Optional Rubber Base: 6kg 28 SAFETYXPRESS.COM.AU LINE MARKING SUPPLIES

Line Marking Paint Line Marking Stencils Eurocell Masking Tape Keep a uniform look, minimise paint bleed It’s what the line markers use. We don’t mind The Eurocell 50mm wide masking tape is the and the likelihood of errors by using number sharing this little secret with you as it’s good preferred option by linemarkers. and letter stencils. Reuseable a number to know this paint is the best available. of times these stencils are an investment It doesn’t get any better than that as a in your work. Easily cleaned and flexible recommendation so if you have a job which enough that dry paint residue will peel off. you could spray, roll or brush on, use this paint. Suitable for concrete or asphalt sur- Disabled parking stencil meets Australian faces. 15 litre tins. Standards. Specifications: SKU: MASKTCAR24 Specifications: Specifications: Carton: 24 Rolls SKU: LMPRC15L SKU: STENALPHSET300 Length: 50m Available in Black, Yellow, Red, White, Grey. A_Z – 300mm Width: 50mm SKU: STENUMSET300 0-9- 300mm SKU: MASKTAPE SKU: STENDIS Single roll Disabled Parking Stencil

Line Marking Tape Car Park Marking Dots Raised Pavement Used to mark out designated areas within the Car Park Marking Dots for highlighting Markers 2 Way RRPMs workplace, factories and warehouses as an carpark spaces on gravel, asphalt or grass 2 Way Reflective Raised Pavement Marker alternative to using permanent line marking. surfaces. (RRPM) used to clearly define traffic lanes at Can also be used for marking out areas to be night and by day. Other applications include spray painted. Specifications: colour-coding of: SKU: MDOT Entrances - acceleration lanes Specifications: Material: Plastic Exits - decceleration lanes SKU: LMTAPE4833 Diameter: 100mm Service - low speed lanes Length: 33m Fixing: Comes with fixing peg 125mm long Main travel – high speed lanes Width: 48mm Colour: Yellow or White Wall mounted bridge and tunnel marking Construction zones

Specifications: SKU: RRPM2WAY Size: 100mm x 75mm Colours: Yellow, White, Blue, Red, Green CALL 1300 049 246 29 GRACO INDUSTRIAL SUPPLIES

Graco LineLazer 3400 Graco LineLazer 3900 ThermoLazer 200TC The LineLazer 3400 is the proven performer This machine comes complete with two quick Striping contractors can now achieve more for your restriping jobs. As the preferred release spray guns, one with a longer hose for production with a safer, more affordable, and choice for 1-gun professional performance, stencil work, three wheel trolley with lock-in easier to use thermoplastic system. Graco the LineLazer 3400 is perfect for small park- jockey wheel, and digital display with infor- changed the world of thermoplastic striping ing lots, seal coating contractors, schools and mation storage. Designed to deliver the most with the ThermoLazer Striping System, and park and recreation departments. precise and consistent lines in the industry, it they’ve done it again with the new ThermoLaz- is the perfect choice for medium to large car er 200TC. The premiere solution for smaller Specifications: parks and even big shopping centres. thermoplastic striping jobs. SKU: GRA3400 Specifications: Specifications: Fuel: LPG Dimensions: L: 167cm x H: 125cm x W: 97cm SKU: GRA3900 SKU: GRA200TC Dry Weight: 72.5 kg Fuel: LPG Fuel: LPG, Material Capacity : 90 kg Max Pressure: 3300psi Dry Weight: 104kg Dimensions L 112cm, 99cm H, 84cm W Max Flow : 2.8 l/min Max Pressure: 3300psi Bead Hopper Capacity : 18 kg Engine : 4HP Honda Max Flow : 4.7 l/min Dry Weight : 119 kg Paint Capacity : 20 litres standard, 57 litres optional Engine : 4HP Honda Melt Time for 136kg (300 lb) Thermoplastic Paint Capacity : 20 litres standard, 57 litres optional Material : 4.5 Hours without the PreMelt System

Graco Grindlazer 270 Graco 190 PC Express Graco G-Force II 2532 DD Graco GrindLazer 270 is a medium duty Electric Airless Paint Sprayer Pressure Washer scarifier ideal for removing parking bay lines. Graco’s 190 PC Express electric airless The G-Force II 2532 DD is a great choice for Comes with EasyGlide wheel mount system sprayer is an ideal choice for the beginning light duty applications. It’s light, compact, and 8inch 8 point flail cutters for everyday painting professional. Its compact, light- and ideal when you need consistent line removal from traffic paint to thermo- weight design weighs less than 14 kg, and it’s reliability for the occasional cleaning job. plastics. built tough to handle everyday use in small High-pressure Gun and Wand. interior and exterior paint projects, repaint- 4 Quick-Connect Spray Tips (0°, 15°, 25°, Specifications: ing and new construction. Chemical), Chemical Injector Kit SKU: GRAGRIN270 Recommended materials: Latex, Acrylics, 50 ft / 15 m Non-marking Hose Max Cut Width: 8inch (20cm) Enamels, Lacquers and Varnishes. 50 Mesh Inlet Filter Cut Direction: Forward Specifications: Specifications: Removal Rate: 600 sq foot / 1300 sq foot SKU: GRAPS190 SKU: GRAPW2532 per hour Max PSI (BAR): 3000 (207) Maximum Working Pressure: 3200 psi Engine : 9.0HP Honda Motor: 5/8 hp DC 240V Honda Engine Size: GX200 Dry Weight : 136 kg Hose: 3/8 in x 50 ft (4000 psi) 30 SAFETYXPRESS.COM.AU MATS

Anti-Slip Industrial Mat Anti-Fatigue Diamond Plate Anti-Fatigue Ergo Stance Industrial grade, multi-purpose wet area Sponge Mat The Ergo Stance Anti-Fatigue mat is non-slip mat. Durable natural rubber mat Extremely suitable to areas exposed to wear commonly used within work places in areas with large drain holes. Provides a safe and tear. Good relief of leg, ankle and back in which staff are conducting tasks on their environment in moderately wet areas. Can discomfort while working. Durable PVC feet for long periods of time. A moulded be used in wet or wash areas to help prevent surface - bonded to a resilient anti-fatigue rubber mat with a flexible domed top surface. slipping accidents. Approx 13mm thick. closed cell vinyl foam base. Diamond pat- Specifically designed to massage the feet and tern provides an abrasion and slip resistant provide anti-fatigue support when working in Specifications: surface. Top surface will resist common a stationary position for extended periods of SKU: 825IND6090 – 600mm x 900mm fluids, most chemicals and is non-flammable. time. Provides comfort and relief for leg and SKU: 825IND9015 – 900mm x 1.5m Available in solid Black or with Yellow/Black back fatigue. chevron borders. Bevelled edges on all sides. Specifications: Specifications: SKU: ERGSTA60X90 – 600mm x 900mm SKU: 416DPS6090 – 600mm x 900mm SKU: ERGSTA90X12 – 900mm x 1.2m SKU: 416DPS9015 – 900mm X 1.5m SKU: ERGSTA90 – 900mm x per metre

Polyrib Entrance Mat Entrymaster Classic Mat You Beaute Ute Mat Made from durable polypropylene fibre with Durable polypropylene will not fade, rot or Order by the metre to protect your cargo a vinyl back and borders. Effectively removes stain and also dries quickly. Ideal for door- and the deck of your valuable ute with the dirt and moisture from footwear. way areas. The raised pattern will not flatten. You Beaute Ute Mat. Made using a premium Excellent dirt and water retention. The quality, 100% natural rubber our ute mats are cleated back minimises movement on most non-porous, non-slip, easy to clean rubber. Specifications: surfaces especially carpet. Easily cleaned by It has holes to allow moisture to evaporate to SKU: 500PB6090 - 900mm x 600mm sweeping, vacuuming or hosing. Anti-static save your tray from rusting out. Have a custom SKU: 500PB69015 - 900mm x 1.5 and safe for using in sensitive areas 1.2KV. size? The You Beaute Ute Mat can be easily cut Passes flammability standards DOCFF1-70. to size or shape with a knife. Can also be used for Boats, Work Shops or Home Gyms. Specifications: SKU: 200ENT12LM – 1.2m per lineal metre Specifications: SKU: 200ENT6090 – 600mm x 900mm SKU: UTEMATH SKU: 200ENT1824 – 1.8m x 2.4m Length: 100cm SKU: 200ENT9015 – 900mm x 1.5m Thickness: 10mm Width: 183cm Matting available in up to 10m lengths CALL 1300 049 246 31 CAR PARK STORAGE

OVER BONNET STORAGE LOCKER Wow look at this for size. This is a massive Storage Locker which will fit over the FEATURES bonnet of your car in your parking space. Used extensively in high-rise apartment buildings where storage is a premium, this is the solution. Solid powder coated • Long life solid steel construction steel construction with durable slow lift struts, this unit is lockable too. Height • Holds up to 300kgs adjustable legs are included which are handy if you have a 4WD or higher vehicle • 11 level adjustable gas strut door to raise the clearance from the standard height of 1100mm to 1400mm. The Safety Xpress Over Bonnet Storage Locker provides a huge 2.5 cubic metres of • Adjustable legs to suit almost any vehicle bonnet height additional storage space perfect for storing items such as golf clubs, • Easily assembled by 1 to 2 people beach/outdoor gear. • Unique key 3 point locking system (2 keys supplied) Specifications: • Galvanised steel and powder coat finish SKU: OBSL24 • Minimal bolts and screws for fast assembly Dimensions: 2.5m Wide x 1m Deep x 1m High (Total Height 2.1m - 2.4m) Clearance: 1.1m - 1.4m with adjustable legs (ground to bottom of unit over car) • Sits freestanding on your carpark floor Load Capacity: 300kgs • 10 year limited warranty Material: Steel with Shale Grey powder coat finish SAFETYXPRESS.COM.AU

SHOP ONLINE

MELBOURNE, VIC Car Park and Safety Supplies

ALL OUR PRODUCTS ARE AVAILABLE ONLINE AT DISCOUNT PRICES.

GOLD COAST, QLD safetyxpress.com.au

SAFETY Phone 1300 049 246 XPRESS Email [email protected]