Moog Sonic Six

Total Page：16

File Type：pdf, Size：1020Kb

Moog Sonic Six The Moog Sonic Six is a duophonic analog synthesizer that was manufactured by Moog Music from 1972 to 1979. Because of its portable design and built-in speaker, the Sonic Six was widely used for lectures and educational purposes, often by Bob Moog himself. The Sonic Six is the result of Bill Waytena, then the owner of synthesizer manufacturer Musonics, acquiring R.A. Moog Inc. Interested in the marketing opportunity afforded by the Moog name, Waytena acquired R.A. Moog Inc., moved the company to The Sonic Six is an interesting, although obscure synthesizer from the Moog history books. Its predecessor, the Sonic V, was designed by an ex-Moog employee for the muSonics brand. When muSonics eventually bought out R.A. Moog, forming Moog muSonics, the Sonic Vâ™s basic design was moved into a portable brief-case style synthesizer, and with only a few tweaks, the Sonic Six was born. Moog Sonic 6. Analogue Synthesizer (Retrozone). Hardware > Keyboard, Synthesizer.Â The pioneering Sonic 6 has a complex and intriguing background, featuring not only the synth industry's most famous name, Bob Moog, but also that of an unsung hero called Gene Zumcheck â” a shadowy figure now, but one whose contribution to synthesis deserves acknowledgement. Call me a heretic if you like, but I sometimes wonder why we make such a lot of fuss over Bob Moog and the synthesizers that bear his name. The Moog Sonic 6 (also Sonic VI and Sonic Six) is a duophonic analog synthesizer that was manufactured by Moog Music from 1972 to 1979. The Sonic 6 is the result of Moog Music's acquisition of the company Musonics, which had previously made a synthesizer called the Sonic V. The Sonic 6 is mounted in its own briefcase; the upper control panel folds and latches over the keyboard to ease transportation and storage. The Moog Sonic Six is a duophonic analog synthesizer that was manufactured by Moog Music from 1972 to 1979. It's portability was used for lectures and educational purposes Bob Moog. The Sonic Six is the result of owner Bill Waytena of synthesizer maker Musonics which bought R.A. Moog Inc. as the company name Moog went under in this period. By using the Moog name, Waytena bought R.A. Moog Inc.,and moved the company to Buffalo, New York, and renamed it Moog/Musonics..

Copy Link

Recommended publications

Minimoog Model D Manual
3 IMPORTANT SAFETY INSTRUCTIONS WARNING - WHEN USING ELECTRIC PRODUCTS, THESE BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED. 1. Read all the instructions before using the product. 2. Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool or the like. 3. This product, in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. 4. The product should be located so that its location does not interfere with its proper ventilation. 5. The product should be located away from heat sources such as radiators, heat registers, or other products that produce heat. No naked flame sources (such as candles, lighters, etc.) should be placed near this product. Do not operate in direct sunlight. 6. The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product. 7. The power supply cord of the product should be unplugged from the outlet when left unused for a long period of time or during lightning storms. 8. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. There are no user serviceable parts inside. Refer all servicing to qualified personnel only. NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules.
[Show full text]
Analog Synthesizer So There Is No Need for Soldering.)
Assembly time: Approximately 20 minutes (The electric circuit comes pre-assembled, Analog Synthesizer so there is no need for soldering.) How to Assemble and Use the Supplement Things you will need Parts in the Kit Phillips screwdriver (No. 1) AA alkaline batteries (4 new) Knobs (5) * Please note that rechargeable NiCd batteries and non-rechargeable Oxyride and nickel-based batteries should not be Washer head screws (7) used due to a high risk of components melting or fire breaking out with these batteries because of accidental short-circuiting or the like. Additionally, because this supplement was designed based on operation at 6 V, it may not operate in the desired way due to an excess of or a deficiency in voltage with the above batteries. Incidentally, most rechargeable batteries provide 1.2 V and Screws (3) Oxyride batteries, 1.7 V. Main unit Cellophane tape Notes for tightening screws The types of screws used for the supplement are those that carve grooves into the plastic as they are inserted (self-threading). The screwdriver most suited to tightening the screws is the #1 JIS screwdriver. When tightening screws, Circuit board firmly press the provided screwdriver straight against the screws and turn. It is said that 70 percent of the force applied is used for pushing against the screw and 30 percent for turning it. Precision screwdrivers are hard to turn, so use a small screwdriver with a grip diameter of about 2 cm. Electrode Slider panel Speaker Cut out the cardboard (Wrapped in cardboard.) case to use as a back cover.
[Show full text]
Imagine Your Art As the New Face of Moog Music's
IMAGINE YOUR ART AS THE NEW FACE OF MOOG MUSIC’S HEADQUARTERS! WELCOME ALL CREATIVES We are excited to be accepting artist submissions for a design that will be the new face of the Moog factory in downtown Asheville, NC. Locals and visitors of our vibrant city have come to know our factory by the iconic synthesizer mural that has adorned the buildingʼs exterior for more than eight years. Now, weʼre ready to breathe new life into the public artwork that represents who we are and the instruments that our employee-owners build inside these four walls. This is where you come in! 1st PLACE WINNER TOP 5 RUNNERS-UP • Moog One 16-Voice Analog Synthesizer ($8,500 value) • Your Choice: Moog Mother-32, DFAM, or Subharmonicon • Your Artwork Displayed on the Moog Factory • Moog Merch Package HOW IT WORKS 1. Synthesize your best ideas of what represents Moog and our creative community. 2. Download the asset pack for artwork templates and specifications on file type and dimension requirements. 3. Submit your custom artwork at www.moogmusic.com/mural by February 19, 2021. Upload your artwork as a high resolution thumbnail that does not exceed 9MB, print files will be requested if you are selected as the winner. You may submit up to three pieces for consideration. 4. Online voting will be open to the public at www.moogmusic.com/mural from January 11 – February 28, 2021. 5. Weʼll select one grand prize winner and five runners-up, and will announce the winners via our email newsletter. The popular public vote will count toward our teamʼs consideration; make sure to share the voting link to your artwork on your website, social media accounts, etc.
[Show full text]
A Nonlinear Analysis Framework for Electronic Synthesizer Circuits
A Nonlinear Analysis Framework for Electronic Synthesizer Circuits Fran¸cois Georges Germain Department of Music Research McGill University Montreal, Canada October 2011 A thesis submitted to McGill University in partial fulfillment of the requirements for the degree of Master of Arts. c 2011 Fran¸cois Georges Germain i Abstract This thesis presents a theoretical and experimental study of the nonlinear behaviour of analog synthesizers’ effects. The goal of this thesis is to evaluate and complete current research on nonlinear system modelling, both in and out of the field of music technology. The cases of single-input and multiple-input effects are considered. We first present an electronic analysis of the circuits of common examples of analog effects such as Moog’s lowpass filter and Bode’s ring modulator, extracting the equations of each system. We then discuss the results of experiments made on these systems in order to extract qualitative information about the distortion found in the system input-output relationship. Secondly, we look at the literature for methods used to model single-input nonlinear systems, and we investigate the opportunities to extend these techniques to multi-input systems. We focus on two different modelling approaches. The black-box approach seeks to model the input-output transfer function of the system as closely as possible without any particular assumption on the system. The circuit modelling approach uses the knowledge of electronic component behaviour to extract a transfer function from the known circuit of the system. The results of both approaches are compared to our experiments in order to evaluate their accuracy, identify flaws and, when possible, suggest potential improvements of the methods.
[Show full text]
Roland AX-Edge Parameter Guide
Parameter Guide AX-Edge Editor To edit the tone parameters of the AX-Edge, you’ll use the “AX-Edge Editor” smartphone app. You can download the app from the App Store if you’re using an iOS device, or from Google Play if you’re using an Android device. AX-Edge Editor lets you edit all the parameters except system parameters of the AX-Edge. © 2018 Roland Corporation 02 List of Shortcut Keys “[A]+[B]” indicates the operation of “holding down the [A] button and pressing the [B] button.” Shortcut Explanation To change the value rapidly, hold down one of the Value [-] + [+] buttons and press the other button. In the top screen, jumps between program categories. [SHIFT] In a parameter edit screen, changes the value in steps + Value [-] [+] of 10. [SHIFT] Jumps to the Arpeggio Edit screen. + ARPEGGIO [ON] [SHIFT] Raises or lowers the notes of the keyboard in semitone + Octave [-] [+] units. [SHIFT] Shows the Battery Info screen. + Favorite [Bank] Jumps between parameter categories (such as [SHIFT] + [ ] [ ] K J COMMON or SWITCH). When entering a name Shortcut Explanation [SHIFT] Cycles between lowercase characters, uppercase + Value [-] [+] characters, and numerals. 2 Contents List of Shortcut Keys .............................. 2 Tone Parameters ................................... 19 COMMON (Overall Settings) ............................. 19 How the AX-Edge Is Organized................ 5 SWITCH .............................................. 20 : Overview of the AX-Edge......................... 5 MFX .................................................
[Show full text]
Arturia Minibrute User Manual
USER'S MANUAL Arturia MiniBrute User's Manual 1 6 Legal notes PRODUCT AND PROJECT MANAGEMENT Frédéric BRUN Romain DEJOIE ELECTRONICS Yves USSON Bruno PILLET François BEST Laurent BARET Robert BOCQUIER Antoine BACK DESIGN Axel HARTMANN (Design Box) Daniel VESTER Morgan PERRIER INDUSTRIALIZATION Nicolas DUBOIS Suzy ZHU (Huaxin) MANUAL Yves USSON Craig ANDERTON Antoine BACK Yasu TANAKA Noritaka UBUKATA SPECIAL THANKS TO: Arnaud REBOTINI, Étienne JAUMET, Jean-Benoît DUNCKEL, Simon TARRICONE, Glen DARCEY, Frank ORLICH, Jean-Michel BLANCHET, Frédéric MESLIN, Mathieu BRUN, Gérard BURACCHINI. 1st edition: February 2012 Information contained in this manual is subject to change without notice and does not represent a commitment on behalf of ARTURIA. The hardware unit and the software product described in this manual are provided under the terms of a license agreement or non-disclosure agreement. The license agreement specifies the terms and conditions for its lawful use. No part of this manual may be produced or transmitted in any form or by any purpose other than purchaser’s personal use, without the explicit written permission of ARTURIA S.A. All other products, logos or company names quoted in this manual are trademarks or registered trademarks of their respective owners. © ARTURIA S.A. 1999-2012, all rights reserved. ARTURIA S.A. 4, chemin de Malacher 38240 Meylan FRANCE http://www.arturia.com Arturia MiniBrute User's Manual 2 6 Legal notes TABLE OF CONTENTS 1 Introduction ............................................................................
[Show full text]
Analog Synthesizers
ELEN E4896 MUSIC SIGNAL PROCESSING Lecture 4: Analog Synthesizers 1. The Problem Of Electronic Synthesis 2. Oscillators 3. Envelopes 4. Filters Dan Ellis Dept. Electrical Engineering, Columbia University [email protected] http://www.ee.columbia.edu/~dpwe/e4896/ E4896 Music Signal Processing (Dan Ellis) 2013-02-11 - 1 /17 1. The Problem of Electronic Synthesis • How can we synthesize notes and music ... and have it sound as good as real instruments? • Real instrument tones are complex Piano Trumpet Plucked Violin Bowed Violin E4896 Music Signal Processing (Dan Ellis) 2013-02-11 - 2 /17 The Analog Synthesizer • Minimum “useful” configuration Envelope Trigger Pitch + harmonics Pitch t Amplitude variation + + Vibrato Cutoff (dynamics) freq Sound Spectral variation Oscillator Filter + Gain f (1970s technology) t Minimoog, 1972 Minimoog, E4896 Music Signal Processing (Dan Ellis) 2013-02-11 - 3 /17 Digital Simulation of Analog • E.g. Loomer Aspect http://www.loomer.co.uk/aspect.htm E4896 Music Signal Processing (Dan Ellis) 2013-02-11 - 4 /17 PureData (Pd) • Visual metaphor based on analog synths “wires” connect modules • Tutorial: http://en.flossmanuals.net/PureData/ E4896 Music Signal Processing (Dan Ellis) 2013-02-11 - 5 /17 2. Oscillators • Pitch = sinusoid? only a single color • Real instruments have more harmonics static spectrum determines instrument sound? • Additive: Combine individual harmonics calculating sinusoids in real time is expensive... • Subtractive: Shape harmonics with filters start with a spectrally rich signal “shape” harmonics efficiently with LTI filters E4896 Music Signal Processing (Dan Ellis) 2013-02-11 - 6 /17 Basic waveforms • Sinusoid • Square wave • Pulse waveform • Sawtooth • Triangle E4896 Music Signal Processing (Dan Ellis) 2013-02-11 - 7 /17 Aside: Bandlimiting • It’s easy to sample “ideal” simple waveforms but the ideal ones are not bandlimited ➝ lots of aliased energy • Solution: Bandlimited waveforms e.g.
[Show full text]
A Narrative Exploring the Perception of Analog Synthesizer Enthusiasts' Identity and Communication Christoph Stefan Kresse Clemson University
Clemson University TigerPrints All Theses Theses 5-2015 Synthesized: A Narrative Exploring the Perception of Analog Synthesizer Enthusiasts' Identity and Communication Christoph Stefan Kresse Clemson University Follow this and additional works at: https://tigerprints.clemson.edu/all_theses Recommended Citation Kresse, Christoph Stefan, "Synthesized: A Narrative Exploring the Perception of Analog Synthesizer Enthusiasts' Identity and Communication" (2015). All Theses. 2114. https://tigerprints.clemson.edu/all_theses/2114 This Thesis is brought to you for free and open access by the Theses at TigerPrints. It has been accepted for inclusion in All Theses by an authorized administrator of TigerPrints. For more information, please contact [email protected]. SYNTHESIZED: A NARRATIVE EXPLORING THE PERCEPTION OF ANALOG SYNTHESIZER ENTHUSIASTS’ IDENTITY AND COMMUNICATION A Thesis Presented to the Graduate School of Clemson University In Partial Fulfillment of the Requirements for the Degree Master of Arts Communication, Technology, and Society by Christoph Stefan Kresse May 2015 Accepted by: Dr. Chenjerai Kumanyika, Ph.D., Committee Chair Dr. David Travers Scott, Ph.D. Dr. Darren L. Linvill, Ph.D. Dr. Bruce Whisler, Ph.D. i ABSTRACT This document is a written reflection of the production process of the creative project Synthesized, a scholarly-rooted documentary exploring the analog synthesizer world with focus on organizational structure and perception of social identity. After exploring how this production complements existing works on the synthesizer, electronic music, identity, communication and group association, this reflection explores my creative process and decision making as an artist and filmmaker through the lens of a qualitative researcher. As part of this, I will discuss logistic, as well as artistic and creative, challenges.
[Show full text]
Analog & Digital Remote Synthesizer
The University of Akron IdeaExchange@UAkron Williams Honors College, Honors Research The Dr. Gary B. and Pamela S. Williams Honors Projects College Spring 2021 Analog & Digital Remote Synthesizer Adam Brunner [email protected] Andrew Cihon-Scott [email protected] Scott Grisso [email protected] Linus Wright [email protected] Follow this and additional works at: https://ideaexchange.uakron.edu/honors_research_projects Part of the Digital Circuits Commons, Digital Communications and Networking Commons, Electrical and Electronics Commons, Other Electrical and Computer Engineering Commons, and the Signal Processing Commons Please take a moment to share how this work helps you through this survey. Your feedback will be important as we plan further development of our repository. Recommended Citation Brunner, Adam; Cihon-Scott, Andrew; Grisso, Scott; and Wright, Linus, "Analog & Digital Remote Synthesizer" (2021). Williams Honors College, Honors Research Projects. 1288. https://ideaexchange.uakron.edu/honors_research_projects/1288 This Dissertation/Thesis is brought to you for free and open access by The Dr. Gary B. and Pamela S. Williams Honors College at IdeaExchange@UAkron, the institutional repository of The University of Akron in Akron, Ohio, USA. It has been accepted for inclusion in Williams Honors College, Honors Research Projects by an authorized administrator of IdeaExchange@UAkron. For more information, please contact [email protected], [email protected]. Analog + Digital Remote Synthesizer Project Design Report Design Team 9 Adam Brunner Andrew Cihon-Scott Scott Grisso Linus Wright Dr. Robert Veillette 11/25/2020 2 Table of Contents List of Figures 4 List of Tables 5 Abstract 7 1. Problem Statement 8 1.1.
[Show full text]
Design for a New Type of Electronic Musical Instrument
Reimagining the synthesizer for an acoustic setting; Design for a new type of electronic musical instrument Industrial Design Engineering Bachelor Thesis Arvid Jense s0180831 5-3-2013 University of Twente Assessors: 1st: Ing. P. van Passel 2nd: Dr.Ir. M.C. van der Voort Reimagining the synthesizer for an acoustic setting; Design for a new type of electronic musical instrument By: Arvid Jense S0180831 Industrial Design Engineering University of Twente Presentation: 5-3-2013 Contact: Create Digital Media/Meeblip Betahaus, to Peter Kirn Prinzessinnenstrasse 19-20 BERLIN, 10969 Germany www.creadigitalmusic.com www.meeblip.com Examination committee: Dr.Ir. M.C. van der Voort Ing. P. van Passel Peter Kirn ii iii ABSTRACT A design of a new type of electronic instrument was made to allow usage in a setting previously not suitable for these types of instrument. Following an open-ended design brief, an analysis of the Meeblip market, synthesizer design literature and three case-studies, a new usage scenario was chosen. The scenario describes a situation of spontaneous music creation at an outside location. A rapidly iterating design process produced a wooden, semi-computational operated synthesizer which has an integrated power supply, amplifier and speaker. Care was taken to allow for rich and musical interaction as well as making the sound quality of the instrument on a similar level as acoustic instruments. Keywords: Synthesizer design, Electronics design, Open source, Arduino, Meeblip, Interaction design SAMENVATTING (DUTCH) Een ontwerp is gemaakt voor een nieuw type elektronisch muziek instrument welke gebruikt kan worden in een setting die eerder niet geschikt was voor elektronische instrumenten.
[Show full text]
GRP A8 – Analog Studio Synthesizer
GRP A8 – analog studio synthesizer „If you wanna start, start big!“ is what Groppioni Paolo (GrP) must have told me in 2008. We were sitting in front of a huge proxy of a synthesizer panel. In fact, the A8 – with 127 x 67 cm – is one of the largest synthesizers ever produced. It was built 22 times* and has been in studios in the USA, Switzerland, France, Belgium, Germany and Austria since 2010. [*After the production run ended, Paolo built a last GRP A8 for himself. So there are 23 instruments in total in existence.] Beside its monstruous size, it’s its concept that makes the GRP A8 awe-inspiring. More than that – I believe the GRP A8 has become a milestone in synthesizer history. While most modern analog synthesizers follow the concept of classic synthesizers, GRP has gone its own way. Fabulous sound is the basis, of course, but on top of this the GRP concept is tremendously flexible. There’s a fantastic intuitive user surface (with knobs instead of patches, so you’re faster), MIDI and (!) CV/gate, delightful performance features including the synchronization of all rhythm-based components (LFOs, S/H, auto-pan, sequencer …), and well … a wonderful – absolutely unique! – step-sequencer. | 1 GRP A8 – analog studio synthesizer GRP A8 – sequencer enabling section for VCOs, PWM and filter modulation Overview The GRP A8 is a dual section analog synthesizer capable of creating two entirely separate sounds. The instrument offers: 6x VCOs 6x sub-oscillators 1x noise (for audio and modulation) 2x ring modulator 2x 24dB lowpass filters 2x 12dB
[Show full text]
Transcript of a Video Oral History Interview with Herbert Deutsch, July 25, 2014
TRANSCRIPT OF A VIDEO ORAL HISTORY INTERVIEW WITH HERBERT DEUTSCH Accession 2015.34 Interview conducted July 25, 2014 At The Henry Ford Dearborn, Michigan, USA Interviewer: Barry Hurd The Henry Ford 20900 Oakwood Boulevard ∙ Dearborn, MI 48124-5029 USA [email protected] ∙ www.thehenryford.org MEDIA ID: DEUTSCH INTERVIEW.MP3 PG. 2 OF 56 THE HENRY FORD STORY: ON INNOVATION INTERVIEW WITH HERBERT DEUTSCH MEDIA ID: DEUTSCH INTERVIEW.MP3 (OFF-MIC CONVERSATION) QUESTION: So-- so if you could just state your name for the record and-- who you are (INAUDIBLE)? HERBERT DEUTSCH: Hi, I'm Herbert Deutsch. QUESTION: And so-- how did your life in music begin if you could tell us that? HERBERT DEUTSCH: Well, yeah. I've had an interesting life as a musician. And I had-- it-- a beginning of a life in music, some of which I can actually remember quite well. And the-- the first thing that I remember that I've told people many times is we had a piano in the house. And I came from a very poor family. They ran a chicken farm-- on Long Island in-- where chicken farms and things were 2015-34-2_HerbDeutschInterviewTranscript.docx MEDIA ID: DEUTSCH INTERVIEW.MP3 PG. 3 OF 56 only if you didn't have any money, you tried to sell (LAUGH) chickens and eggs. I h-- there was a piano in the house. It was a wreck. I can remember that. But I liked the just touch and play on it. I was three years old. I was out in the garage of the house.
[Show full text]