2019 Fall CLEARANCE SALE SPECIAL OFFERS WHILE SUPPLIES LAST, TAXES NOT INCLUDED

Total Page:16

File Type:pdf, Size:1020Kb

2019 Fall CLEARANCE SALE SPECIAL OFFERS WHILE SUPPLIES LAST, TAXES NOT INCLUDED 2019 Fall CLEARANCE SALE SPECIAL OFFERS WHILE SUPPLIES LAST, TAXES NOT INCLUDED Image for Product Display Only Hog Crusher, (Not Actual 420-R Concrete 454-R Concrete Product Photo) Bucket, 3/4 Cu Yd Bucket, 2 Cu Yd Material Crusher Used Used Used, 2010 Image for Product Image for Product Display Only Display Only (Not Actual (Not Actual Product Photo) Product Photo) VLG CB-075 $1,200 VLG CB-20 $2,500 VLG HCR $2,000 GH75 Grout Hog Mayco C30HDG CG-050 Grout EZG Grout & Concrete Pump Chemgrout Used 2004 Used 2017 Pump Image for Product Image for Product Display Only Display Only Image for Product Used 2013 (Not Actual Display Only (Not Actual Product Photo) Product Photo) (Not Actual Product Photo) VLG GPCG VLG GH75 $2,000 VLG GP30 $15,000 $2,500 PLACING CG-050 Grout AT16 Power Buggy EQUIPMENT, Used, 2018 Pump Chemgrout Image for Product Display Only (Not Actual Product Photo) Used 2007 BUGGY Image for Product Display Only (Not Actual Product Photo) PAGE 1 CONSTRUCTION EQUIPMENT AND SUPPLIES GOEDECKEONLINE.COM [email protected] VLG GPCG $1,800 VLG 56800 $15,000 (314) 652-1810 2 GANG SLAB Essick 7 Cubic Puddle Sucker Pump RIDER 210B-2 SRA Foot Mortar Mixer S500P Used, 2004 New Used Image for Product Display Only (Not Actual Product Photo) Image for Product Display Only (Not Actual Product Photo) VLG EZ2102 $12,000 VLG MQ7E $2,000 VLG S500P $250 SmartLift Glass GloBug Lighting Rebar Tier, RB655 Manipulator Paving Lite Used (2 Available) Image for Product Display Only (Not Actual Product Photo) Used, 2016 New (1 Available) Image for Product Display Only (Not Actual Image for Product Display Only Product Photo) (Not Actual Product Photo) VLG SL608 $28,499 VLG GB114BP $500 VLG RB655 $1,500 Rebar Tier, Rebar Tier, RB392 Blastcrete Grout HUT-10W32 Used Pump with Mixer Used Used 2007 Image for Product Display Only (Not Actual Product Photo) Image for Product Display Only (Not Actual Product Photo) Image for Product Display Only (Not Actual Product Photo) VLG RB392 VLG HUT-10W32 $200 $500 VLG GPBLASTCRETE $25,000 MIXERS, DRILL, PUMP, Blastcrete RD6536 D2EF Peristalic LIGHTING, REBAR Concrete Pump Pump, Xlent TIER, LIFT, PLACING Used 2007 Equipment Image for Product Display Only Used EQUIPMENT (Not Actual Product Photo) PAGE 2 CONSTRUCTION EQUIPMENT AND SUPPLIES GOEDECKEONLINE.COM [email protected] VLG RD6536 $20,000 VLG D2EF $2,000 (314) 652-1810 Mayco Plaster CST 56-DGT10 Nikon Total Station Pump MG30T2D Digital Theodolite NPL-332 Used Used, Used Parts Only Image for Product Display Only (Not Actual Product Photo) Image for Product Display Only (Not Actual Product Photo) VLG MG30T2D $5,000 VLG 56-DGT10YEL OR$250 BEST OFFER VLG HQA480US $4,500 Agetec Laser Level Agatec GAT120 Edco TG7G Floor A410S Site Laser Level Grinder Used, Used, Used Parts Only Parts Only VLG MP40 OR$250 BEST OFFER $250 VLG LABGAT120HV OR BEST OFFER VLG TG7G $500 Edco Dust Vacuum MSP450 ASCM-8 HP 12 HED VAC160 Riding Trowel Truss Screed Used (2 Available) Used Used (3 Available) Prices Vary by Screed Length Image for Product Display Only (Not Actual Product Photo) Image for Product Display Only (Not Actual Product Photo) VLG ASCM-8 Call for Pricing VLG VAC160 $600 VLG 060800 $12,000 ASCM-9 HP 12 HED ASCM-11 HP 12 HED PLACING, Truss Screed Truss Screed SURVEY, Used (3 Available) Used FINISHING Prices Vary by Screed Length Prices Vary by Screed Length PAGE 3 Image for Product Image for Product Display Only CONSTRUCTION EQUIPMENT AND SUPPLIES (Not Actual Display Only Product Photo) (Not Actual Product Photo) GOEDECKEONLINE.COM [email protected] VLG ASCM-9 Call for Pricing VLG ASCM-11 Call for Pricing (314) 652-1810 (Parts Only) Husqvarna Floor Allen 7560XL 4 HP 530 Allen Riding Grinder with Power Sprayer Trowel Pigtail, PG280 New Used (1 Available) Image for Product Display Only (Not Actual Product Photo) Image for Product Display Only (Not Actual Product Photo) VLG TR530HD $3,000 VLG 966987420 $500 VLG ACBS-XL $1,800 HKM 15CS Iskco AHFV22 Allen High Wyco 230 Volt High Wood Pecker Cycle Concrete Cycle Vibrator Used (7 Available) Vibrator New Used Image for Product Display Only (Not Actual Product Photo) Image for Product Display Only (Not Actual Product Photo) VLG HKM15CS $200 VLG 064918 $1,100 VLG 417-050 $850 HBM High Frequency 2017 Allen Power 6 Foot Core and Internal Vibrators Vibrator Drive Unit Casing Used New 2017 2017 Allen Power Vibrator Drive Unit Image for Product Display Only (Not Actual Image for Product Image for Product Product Photo) Display Only Display Only (Not Actual (Not Actual Product Photo) Product Photo) VLG 048776 VLG 048780 VLG HBM70 $1,200 $600 $200 FINISHING 2” x 12” Steel Head 2” x 8” Rubber Head EQUIPMENT 2017 Allen Power Vibrator Drive Unit 2017 Allen Power Vibrator Drive Unit VIBRATING Image for Product Image for Product Display Only Display Only EQUIPMENT (Not Actual (Not Actual Product Photo) Product Photo) PAGE 4 CONSTRUCTION EQUIPMENT AND SUPPLIES GOEDECKEONLINE.COM [email protected] VLG 048792 $350 VLG 051252 $525 (314) 652-1810 Wyco 992 Electric Wyco 994 Electric Wyco 994 Electric Concrete Vibrator Vibrator Drive Unit Vibrator Drive Unit Includes 992 Electric Drive Motor, 20' Flex Core & Casing CK-9520, 2" Square Used 2015 Used 2014 For Optional Core and Casing For Optional Core and Casing Steel Head 750-LI Lengths and Head Sizes Call for Price Image for Product Lengths and Head Sizes Call for Price Image for Product Display Only Display Only Used (Not Actual (Not Actual Product Photo) Product Photo) VLG VI92 $1,000 VLG W994GIT $600 VLG W994GIT $600 Wyco 994 Electric Wyco 994 Electric Husqvarna K4000 Vibrator Drive Unit Vibrator Drive Unit Wet Electric Power New New For Optional Core and Casing For Optional Core and Casing Cutter Lengths and Head Sizes Call for Price Image for Product Lengths and Head Sizes Call for Price Image for Product New (3 Available) Display Only Display Only (Not Actual (Not Actual Product Photo) Product Photo) Image for Product Display Only (Not Actual Product Photo) VLG W994GIT $600 VLG W994GIT $600 VLG 967084001 $750 Soff-Cut GX1500 Husqvarna Soff-Cut Husqvarna Soff-Cut Concrete Saw 4200 Concrete Saw 4200 Concrete Saw Used Used 2012 Used 2009 Image for Product Image for Product Display Only Display Only (Not Actual (Not Actual Product Photo) Product Photo) VLG GX-1500 $3,000 VLG GX-4200 $12,000 VLG GX-4200 $10,000 VIBRATING Partner K950 Ring Husqvarna K970 Saw Concrete Saws Power Cutter, 16” EQUIPMENT Used (Available) Used, Demo CONCRETE Image for Product Display Only (Not Actual SAWS Product Photo) PAGE 5 CONSTRUCTION EQUIPMENT AND SUPPLIES GOEDECKEONLINE.COM [email protected] VLG K950RS VLG K970-16 $1,000 $2,000 (314) 652-1810 Husqvarna K 970 Marauder 20 HP MK Diamond BX-3 Chain Saw Image for Product Walk Behind Saw 14" Dry Cutting New Display Only Does Not Include Chain (Not Actual Used Product Photo) Masonry Saw New Image for Product Display Only (Not Actual Product Photo) VLG K970CS $1,500 VLG M20SP $750 VLG MS14 $500 Husqvarna Husqvarna Allen TWV436 FH Soff-Cut 2500 Soff Cut X150D Walk Behind - 36" New Image for Product Image for Product New Used 2010 Display Only Display Only (Not Actual (Not Actual Image for Product Product Photo) Product Photo) Display Only (Not Actual Product Photo) VLG X-2500 $8,000 VLG X150D $1,500 VLG TR436-5.5H $1,000 Allen Pro 446 Basic Allen Pro 446 Basic Allen Pro 446 Basic 46" Power Trowel 46" Power Trowel 46" Power Trowel STD Pitch 9 HP Honda STD Pitch 9 HP Honda Quick Pitch 9 HP Honda Used 2006 Used 2013 New Image for Product Image for Product Display Only Display Only (Not Actual (Not Actual Product Photo) Product Photo) VLG TR446-9 VLG 049785 VLG 049785 SN 4461205023 $1,500 SN 4460213001 $1,900 SN 46A0218006 $2,500 CONCRETE Allen Pro 446 Basic SAWS 46" Power Trowel STD Pitch 13 HP Honda WAKKBEHIND Used 2016 TROWELS PAGE 6 Image for Product Display Only (Not Actual Product Photo) CONSTRUCTION EQUIPMENT AND SUPPLIES GOEDECKEONLINE.COM [email protected] VLG 055904 SN 46D0216004 $3,000 (314) 652-1810.
Recommended publications
  • Concrete Equipment
    S A L E S R E 2020 N T of Lincoln HAMILTONA EQUIPMENT CO. L 8801 Highway 6, Lincoln, NE 68507 (402)S 464-6381 C H O O N M S E PRODUCTST O & PRICING ON WEBSITE: R W U N bobcatoflincoln.comC E • hamiltonequipmentco.com T R I S O N ARTICULATED LOADER DOOSAN HONDA GENERATORS COMPACT EXCAVATOR AIR COMPRESSORS MOWERS/WATER PUMPS COMPACT TRACK LOADERHavelock& ACCESSORIES Ave Centrifugal Pump SKID STEER LOADER Blow Pipe Electric Submersible ZERO TURN RIDING MOWERS 70th St. Trash Pump MINI TRACK LOADER Breaker Hammer UTILITY VEHICLES AdamsChipping St. Hammer Generators UTILITY VEHICLES Hose Waterbed Pump TRACTOR & ATTACHMENTS VERSAHANDLER Pole Tamper Mowers SEEDING EQUIPMENT Trimmers BOBCAT ATTACHMENTS Aerator YARD CARE Auger Angle Broom Box Scraper Auger Aerator Mower Auger 1 & 2 Man Bale Spear CONCRETE-DEMO PRODUCTS Food Plot Seeder Breaker Bed Edger COMPACTION EQUIPMENT Overseeder Brushcat Cable Layer/Paver Primary Seeder Brush Saw Brick Saw Hedge Trimmer Pulverizer Dozer Blade Cement Mixer Lawn Edger Rear Blade Exhaust Purifier Concrete Vibrator Lawn Mower Tiller Grader Blade Cut Break-Saw Lawn Roller Grapple Root Cut-Off Saw Lawn Trencher Land Plane Diamond Blades Log Splitter Packer Wheel Electric Hammer Metal Detector Pallet Forks Finish Tools Overseeder Planer Floor Grinder Power Rake Plate Compactor Line Level Sod Cutter Pulverizer Mortar Mixer String Trimmer/Saw Rock Bucket Power Trowel Stump Grinder Snow Blade Power Buggy Tiller Snow Blower Rammer/Jumping Jack Soil Conditioner Soff Cut Saw TRAILERS LIFT EQUIPMENT Deck Over Soil Finisher Tile Saw Drywall Lift Dump Stump Grinder Track Power Buggy Engine Hoist Flatbed Sweeper Trench Compactor Pallet Jack Enclosed Three Point Vibratory Plate Scaffold Water Tiller W.
    [Show full text]
  • Guide to Concrete Repair Second Edition
    ON r in the West August 2015 Guide to Concrete Repair Second Edition Prepared by: Kurt F. von Fay, Civil Engineer Concrete, Geotechnical, and Structural Laboratory U.S. Department of the Interior Bureau of Reclamation Technical Service Center August 2015 Mission Statements The U.S. Department of the Interior protects America’s natural resources and heritage, honors our cultures and tribal communities, and supplies the energy to power our future. The mission of the Bureau of Reclamation is to manage, develop, and protect water and related resources in an environmentally and economically sound manner in the interest of the American public. Acknowledgments Acknowledgment is due the original author of this guide, W. Glenn Smoak, for all his efforts to prepare the first edition. For this edition, many people were involved in conducting research and field work, which provided valuable information for this update, and their contributions and hard work are greatly appreciated. They include Kurt D. Mitchell, Richard Pepin, Gregg Day, Jim Bowen, Dr. Alexander Vaysburd, Dr. Benoit Bissonnette, Maxim Morency, Brandon Poos, Westin Joy, David (Warren) Starbuck, Dr. Matthew Klein, and John (Bret) Robertson. Dr. William F. Kepler obtained much of the funding to prepare this updated guide. Nancy Arthur worked extensively on reviewing and editing the guide specifications sections and was a great help making sure they said what I meant to say. Teri Manross deserves recognition for the numerous hours she put into reviewing, editing and formatting this Guide. The assistance of these and numerous others is gratefully acknowledged. Contents PART I: RECLAMATION'S METHODOLOGY FOR CONCRETE MAINTENANCE AND REPAIR Page A.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • BUILDING CONSTRUCTION TRADES Heavy Construction
    BUILDING CONSTRUCTION TRADES County of El Paso El Paso County EPCHD Davis Classification Prevailing Wage PWR Per Hr. 11/13/01 Bacon Rate 8/11/04 5/12/08 2008 Asbestos/Abatement 10.00 10.00 $10.00 Air Conditioning Mechanic 11.50 13.50 $22.00 Bricklayer 17.84 17.84 $16.92 Acoustical Ceiling Installer 17.84 17.87 $12.50 $10.45 Carpenter - Rough $14.71 $10.79 Carpenter - All other, Millwright $17.78 $14.26 Carpenter 17.87 17.87 Caulker (Sealant) $10.00 $10.00 Cement Mason/ Concrete Finisher 10.50 10.50 $11.91 $11.91 Drywall Installer 19.49 $12.50 Drywall Finishers & Tapers 10.50 $12.50 $8.78 Electrician 19.44 21.27 $25.54 $24.04 Electronic Technician 19.44 9.00 $19.44 Elevator Constructor 20.24 33.34 $46.45 Floor Layer - Resilient & Carpeet 11.00 11.00 $11.50 $12.87 Forklift Operator $9.37 Glazier 11.50 10.82 $10.00 Insulators $10.00 $10.00 Ironworker- Reinforcing/Structural 10.25 10.25 $10.59 8.83/10.59 Irrigator, Certified 18.15 14.50 $8.50 Laborer, Skilled 11.02 15.18 $9.50 Laborer, Common 8.88 8.88 $8.50 $7.95 Manlift $12.13 Millwright 22.01 17.87 $17.78 Operating Engineer- Crane 17.85 17.85 Operating Engineer- Heavy Equip. 16.03 16.03 Operating Engineer- Med. Equip. 15.58 15.58 Operating Engineer- Light Equip. 7.50 8.50 Painter 8.50 8.00 $10.50 $9.17 Paper Hanger $10.50 Plasterer 14.44 11.00 $13.50 $10.86 Plumber $28.45 $14.92 Pipefitters (Heavy 2008 = 43.94) $28.48 $18.15 Plumber & Pipefitter(no HVAC work) 18.15 14.50 Reinforcing Steel Setter 15.37 $11.50 $8.83 Roofer 9.75 9.00 $10.50 Rock Mason 8.00 $9.00 Sheet Metal Worker-all other work (not HVAC) 9.00 14.00 $27.16 $11.23 Sprinkler Fitter 12.85 13.00 $38.60 $38.60 Tile Setter & Terrazo Worker 17.84 9.50 $12.00 $12.02 Tile & Marble Finisher 11.91 n/a $8.01 Truck Driver- Light 8.00 9.00 $9.00 $9.00 Truck Driver- Heavy (over 2,600#) 9.50 8.00 $14.69 Caulker (Sealant) 9.50 9.50 $10.00 Concrete Saw Cutter 9.50 n/a Mechanic 9.25 $14.00 Heavy Construction County of El Paso El Paso County EPCHD Davis Classification Prevailing Wage PWR Per Hr.
    [Show full text]
  • Operator Manual Warning: Read and Understand All Safety Warnings and All Instructions Before You Use This Equipment
    680ES OPERATOR MANUAL WARNING: READ AND UNDERSTAND ALL SAFETY WARNINGS AND ALL INSTRUCTIONS BEFORE YOU USE THIS EQUIPMENT. Failure to follow the warnings and instructions may result in fire, serious injury, or death. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE Original Document © 2015 ICS®, Blount International Inc. Specifications are subject to change without notice. REV021216 F/N 577451 680ES OPERATOR MANUAL This instruction manual contains translations of a manual drafted in English and are provided to assist those who do not speak English as their first language. Being a technical writing, some terms may not have a like or equivalent meaning as translated. Therefore, you should not rely on this translation, and should cross-reference the English version, where relying on the translated instructions ENGLISH could result in harm to your person or property. © 2015 ICS®, Blount International Inc. Specifications are subject to 2 change without notice. REV021216 F/N 577451 680ES OPERATOR MANUAL Table of Contents TABLE OF CONTENTS SYMBOLS AND LABELS 4 ICS 680ES NAMES AND TERMS 7 PRODUCT IDENTIFICATION 9 INTRODUCTION 10 SAFETY RULES 11 UNPACKING AND ASSEMBLY 15 FUELING 22 OPERATION 25 TRANSPORTING & STORING 36 MAINTENANCE 37 TROUBLESHOOTING 45 REFERENCE 46 EMISSIONS 47 TECHNICAL SPECIFICATIONS 49 SERVICE CENTERS 50 DECLARATION OF CONFORMITY 51 © 2015 ICS®, Blount International Inc. Specifications are subject to change without notice. REV021216 F/N 577451 3 Symbols & Labels 680ES OPERATOR MANUAL SYMBOLS AND LABELS THE FOLLOWING SYMBOLS ARE FOUND THROUGHOUT THIS MANUAL AND/OR ON THE SAW AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR UNSAFE PRACTICES. ENGLISH SAFETY ALERT READ INSTRUCTIONS WEAR EYE, HEARING AND Indicates that the text that The original instruction manual RESPIRATORY PROTECTION follows explains a danger, contains important safety and WEAR HEAD PROTECTION warning or caution.
    [Show full text]
  • Edmar Diamond Blade Training Manual 2 What Is a Diamond Blade?
    DIAMOND BLADE BASICS Edmar Diamond Blade Training Manual 2 What is a Diamond Blade? Continuous Turbo Segmented Edmar Diamond Blade Training Manual 3 What is a Diamond Blade? The blade core is a precision-made steel disc which may or may not have slots. Blade cores are tensioned so that the blade will run straight at the proper cutting speed. Proper tension also allows the blade to remain flexible enough to bend slightly under cutting pressure and then go back to it’s original position. Diamond segments or rims are made up of a mixture of diamonds and metal powders. The diamonds used in bits and blades are man-made (synthetic) and are carefully selected for their shape, quality, friability, and size. These carefully selected diamonds are then mixed with a powder consisting of metals such as cobalt, iron, tungsten, carbide, copper, bronze, and other materials. This mixture is then molded into shape and then heated at temperatures from 1700˚ to 2300˚ under pressure to form a solid metal part called the “bond” or “matrix.” The segment or rim is slightly wider than the blade core. This side clearance allows the cutting edge to penetrate the material being cut without the steel dragging against the sides of the cut. After the blade is assembled it is “opened,” “broken in,” or, “dressed” by grinding the edge concentric to the center. This exposes the diamonds that will be doing the work and establishes the cutting direction as noted by the direction of the arrow stamped into the blade. Edmar Diamond Blade Training Manual 4 Edmar Diamond Blade
    [Show full text]
  • CX-3® Gas Powered Concrete
    www.mkdiamond.com CX-3® OWNER’S MANUAL & OPERATING INSTRUCTIONS Gas Powered Concrete Saw Revision 105 07.2012 Manual Part# 159345 Caution: Read all safety and operating instructions before using this equipment. This owner’s manual MUST accompany the equipment at all times. INTRODUCTION Congratulations on your purchase of a CX-3® Concrete Saw. We are certain that you will be pleased with your purchase. MK Diamond takes pride in producing the finest construction power tools and diamond blades in the industry. Operated correctly, your CX-3® Concrete Saw should provide you with years of service. In order to help you, we have included this manual. This owners manual contains information necessary to op- erate and maintain your CX-3® Concrete Saw safely and correctly. Please take the time to familiarize yourself with the CX-3® Concrete Saw by reading and reviewing this manual. Read and follow all safety, operating and maintenance instructions. If you should have questions concerning your CX-3® Concrete Saw, please feel free to call our friend- ly customer service department at: 800 421-5830 Regards, MK Diamond NOTE THIS INFORMATION FOR FUTURE USE: MODEL NUMBER: SERIAL NUMBER: PURCHASE PLACE: PURCHASE DATE: NOTE: For your (1) one year warranty to be effective, complete the warranty card (including the Serial Number) and mail it in as soon as possible. 2 TABLE OF CONTENTS SAFETY Safety Messages 4 Damage Prevention Message 4 General Safety Precautions and Hazard Symbols 5 California Proposition 65 Message 8 Prestart Safety 9 Safety Label Locations
    [Show full text]
  • City of Fort Worth Bid Offer
    CITY OF FORT WORTH BID OFFER Event ID Page Invited: PUBLIC EVENT DETAILS CFW01-20-0162 1 Event Round Version Submit To: City of Fort Worth 1 1 PURCHASING DIVISION Event Name LOWER LEVEL CITY HALL ITB Saw Blades 200 TEXAS ST. Start Time Finish Time Fort Worth TX 76102 07/01/2020 08:00:00 CDT 07/16/2020 13:30:00 CDT United States Email: [email protected] Event Description The City of Fort Worth requests bids from qualified vendors for an annual agreement to provide saw blades on an as-needed basis per the attached Invitation to Bid (ITB). Terms & Conditions No Pre-Bid Conference will be held for this Invitation to Bid. Bids will be accepted in person or by mail from 8:30AM-1:30PM on Thursdays at the South End lobby of City Hall. If the bidder wants to submit earlier, they will need to call Purchasing at 817-392-2462 to make an appointment for Purchasing to pick up the bid Monday through Friday between 8:30AM 5:00PM at the South End Lobby of City Hall located at 200 Texas Street, Fort Worth Texas 76102. Bids will be opened and read aloud publicly via live stream on FortWorthTV at 2:00 PM on the date listed above. NO LATE BIDS WILL BE ACCEPTED A completed bid must be received in the Purchasing Division, by the above "bid finish time". bids may be mailed in a sealed package addressed to A'ja Robertson, City of Fort Worth and have the bid number and opening date clearly marked on the submitted proposal cover page.
    [Show full text]
  • Diamond Blade Overview
    DIAMOND BLADE OVERVIEW Variables in Cutting The segment is the part of the blade that actually does the cutting. A measured quantity of manufactured diamonds are mixed to- gether with a specific combination of powdered metals (the matrix) and processed in graphite molds at a high temperature and high pressure to form individual segments. • Diamond blades do not really cut, instead they grind through material. • The diamond crystals remove material by scratching out particles of hard, dense materials, or by knocking out larger particles of loosely bonded abrasive material. CONTINUOUS SMOOTH RIM • Provides clean, smooth cuts on: Glazed ceramic tile, marble, granite, porcelain and quarry tile • Wet and dry specs available • Sizes: 4" – 14" diameters SERRATED / TURBO RIM • Provides fast cutting with minimal chipping on: Roof tile, unglazed tile, masonry, brick, block, paver, stone and concrete • Dry specs (can be used with water) • Sizes: 4" – 16" diameters SEGMENTED RIM • Provides maximum life and cutting strength: Concrete, reinforced concrete, asphalt, masonry, brick, block, paver and stone • Wet and dry specs available • Sizes: 4" – 60" diameters 1 www.mkdiamond.com Training Manual WET & DRY CUTTING TYPES OF CUTTING • There are two basic types of cutting – dry or wet. • The best choice of blade depends upon: - the requirements of the job - the machine/tool utilizing the diamond blade - the preference of the operator DRY CUTTING DIAMOND BLADES Because of the overwhelming popularity of handheld saws, and the flexible nature of MK diamond blades to professionally handle most ceramic, masonry, stone and concrete materials, the dry cutting blade is very attractive. Dry cutting blades are also used where water is not permitted or not convenient or where so little cutting is required that set-up of water cooled equipment would be inefficient.
    [Show full text]
  • WARNING WALK-BEHIND CONCRETE SAW Any Piece of Equipment Can Be Dangerous If Not Operated Properly. YOU Are Responsible for the Safe Operation of This Equipment
    WARNING WALK-BEHIND CONCRETE SAW Any piece of equipment can be dangerous if not operated properly. YOU are responsible for the safe operation of this equipment. The operator must carefully read and follow any warnings, safety signs and instructions provided with or located on the equipment. Do not remove, defeat, deface or render inoperable any of the safety devices or warnings on this equipment. If any safety devices or warnings have been removed, defeated, defaced or rendered inoperable, DO NOT USE THIS EQUIPMENT!!! WARNING! This product contains or produces one or more chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Use extreme caution whenever operating, moving, loading or unloading this equipment. During and after operation the Muffler and other components are Extremely Hot and will cause Serious Burns. Never operate power equipment of any kind if you are tired or if you are under the influence of alcohol, drugs, medication or any substance that could affect your ability or judgment. Be alert! If you get tired while operating this equipment, take a break. Tiredness may result in loss of control. Provide adequate ventilation when operating this equipment. Internal combustion engines consume oxygen and give off deadly carbon monoxide gas. DANGER: This equipment has multiple pinch points that can cause dismemberment or death. Keep hands, feet and all other body parts clear at all times. Warning: These machines can weigh up to 225 pounds use caution while lifting and moving. SMI Dust and Silica Warning Using this equipment generates dust, this dust may contain Grinding/cutting/drilling particles from masonry, concrete, metal and other materials, mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as respiratory disease, cancer, birth defects or other reproductive harm.
    [Show full text]
  • Original Instructions
    Original Instructions 009-0001, 009-0001X, 010-0001, 010-0001X, 009-0002, 009-0002X, 010-0002, 010-0002X, 009-0003, 009-0003X, 010-0003, 010-0003X, 009-0004, 009-0004X, 010-0004, 010-0004X, 009-0006, 009-0006X 010-0006, 010-0006X 012-0001, 012-0001X, 012-0001A, 012-0001AX, 012-0002, 012-0002X, 012-0002A, 012-0002AX, 012-0003, 012-0003X, 012-0003A, 012-0003AX, 012-0004, 012-0004X, 012-0004A, 012-0004AX, 012-0006, 012-0006X 012-0006A, 012-0006AX 5015647 Originally written in UK English Date Published: 21 / 05 / 2020 www.evolutionpowertools.com This Instruction Manual was originally Evolution Power Tools will, within the written in English. guarantee period, and from the original date of purchase, repair or replace any IMPORTANT goods found to be defective in materials or workmanship. This guarantee is void if the Please read these operating and safety tool being returned has been used beyond instructions carefully and completely. the recommendations in the Instruction For your own safety, if you are uncertain Manual or if the machine has been damaged about any aspect of using this equipment by accident, neglect, or improper service. please access the relevant Technical Helpline, This guarantee does not apply to machines the number of which can be found on the and / or components which have been Evolution Power Tools website. We operate altered, changed, or modified in any way, several Helplines throughout our worldwide or subjected to use beyond recommended organization, but Technical help is also capacities and specifications. Electrical available from your supplier. components are subject to respective manufacturers’ warranties.
    [Show full text]
  • Multi-Material Cutting Saws
    MULTI-MATERIAL CUTTING SAWS & CONTRACTOR TOOLS EVOLUTION’S RELIABLE & MULTI-MATERIAL POWERFUL MOTORS Hi-Torque Gearbox & Patented Blade System, CUTTING For Increased Motor & Blade-Life. TECHNOLOGY DURABLE MATERIALS YOU CAN CUT: & SAFE Machines Tested For ‘Best-In-Class’. MILD STEEL ALUMINIUM WOOD PLASTICS 3 Year Limited Warranty*. Cuts Without Heat, P ANGLED STEEL, P ARMOURED CABLES P HARDWOOD & P ELECTRICAL CONDUIT Burr-Free & Virtually No Sparks. TANALISED DECKING BOX SECTION & TUBE P CABLE TRAY P PLASTIC PIPES *3 Year Warranty. Saws only. P MDF LAMINATES P METAL STUD P COPPER PLUMBING P PLEXIGLASS P MOULDINGS P DRY LINING P FLOOR EDGINGS P RUBBER & REINFORCED P RECLAIMED TIMBER P REBAR DOMESTIC P ROOF FLASHINGS HOSES WITH NAILS BUILDS P STAIR NOSINGS P WPC COMPOSITES P SCAFFOLD BOARDS P RSJ DOMESTIC BUILDS P STUDWORK TIMBER P STEEL PLATE (6MM) ACCURATE & EASY TO USE TOOLS Clean & Consistent Precision Cuts. DIAMOND BLADES: Clear & Concise Adjustment Settings. STONE Segmented Rim Blades Continuous Rim Blades P BLOCK PAVING (ø 185mm, ø 305mm (ø 210mm and ø 255mm). and ø 355mm) P COPING STONES Provides the smoothest cut in Hot pressed turbo segmented rim ceramic tiles and ornamental stone. P INCREASED ROOFING TILE REPAIRS for consistent cutting ability. *Diamond blades fit on Evolution P UNGLAZED CERAMICS multipurpose saws only. PRODUCTIVITY Unlike Abrasive Discs, TCT Blades’ Depth-of-Cut Remain Constant Throughout Blade Life = PERFECT FOR: Longer Life & Fewer Blade Changes. P BUILDERS P ARCHITECTURAL P FENCING CONTRACTORS P DRIVEWAY, PATH & METALWORKERS PATIO INSTALLERS P CARPENTERS P DIY ENTHUSIASTS P ROOFING CONTRACTORS & UPCYCLERS P MAINTENANCE P AUTO MECHANICS P DRY LINERS P ELECTRICAL FITTERS TECHNICIANS P INDUSTRIAL FITTERS WOOD WITH P LANDSCAPERS P FLOOR FITTERS P WINDOW INSTALLERS P PROPERTY & LOFT EMBEDDED NAILS CONVERTERS P PIPEFITTERS P CEILING FIXERS P KITCHEN FITTERS P FABRICATORS P PLUMBERS Cuts Nail-Embedded Wood Easily When Working With Reclaimed Materials.
    [Show full text]