DOCSLIB.ORG

City of Fort Worth Bid Offer

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
City of Fort Worth Bid Offer CITY OF FORT WORTH BID OFFER Event ID Page Invited: PUBLIC EVENT DETAILS CFW01-20-0162 1 Event Round Version Submit To: City of Fort Worth 1 1 PURCHASING DIVISION Event Name LOWER LEVEL CITY HALL ITB Saw Blades 200 TEXAS ST. Start Time Finish Time Fort Worth TX 76102 07/01/2020 08:00:00 CDT 07/16/2020 13:30:00 CDT United States Email: [email protected] Event Description The City of Fort Worth requests bids from qualified vendors for an annual agreement to provide saw blades on an as-needed basis per the attached Invitation to Bid (ITB). Terms & Conditions No Pre-Bid Conference will be held for this Invitation to Bid. Bids will be accepted in person or by mail from 8:30AM-1:30PM on Thursdays at the South End lobby of City Hall. If the bidder wants to submit earlier, they will need to call Purchasing at 817-392-2462 to make an appointment for Purchasing to pick up the bid Monday through Friday between 8:30AM 5:00PM at the South End Lobby of City Hall located at 200 Texas Street, Fort Worth Texas 76102. Bids will be opened and read aloud publicly via live stream on FortWorthTV at 2:00 PM on the date listed above. NO LATE BIDS WILL BE ACCEPTED A completed bid must be received in the Purchasing Division, by the above "bid finish time". bids may be mailed in a sealed package addressed to A'ja Robertson, City of Fort Worth and have the bid number and opening date clearly marked on the submitted proposal cover page. Late bids will not be considered for award unless bidders are notified otherwise. Bids may be withdrawn at any time prior to the official opening by written notification. Bids may not be altered, amended or withdrawn after the official opening. Bids delivered by special courier(i.e. Federal Express, Special Delivery etc.) are to be marked on the outside of the couriers shipping envelope. BID No. 20-0162 Saw Blades and MUST BE RECEIVED BY THE PURCHASING OFFICE AND TIME STAMPED PRIOR TO THE DEADLINE IN ORDER TO BE CONSIDERED. RESPONSES MAY BE MAILED IN A SEALED PACKAGE TO: CITY OF FORT WORTH PURCHASING DIVISION LOWER LEVEL 200 TEXAS STREET FORT WORTH, TEXAS 76102-6314 Acknowledgment of Addenda: #1_____ #2______ #3______ #4_______#5_______ DOCUMENT NAME - LOCATION Bid Offer Sheet** - Cover Page of Final Bid Document V1 and attached as a separate document Instruction to Bidders - Part I of Final Bid Document V1 Purchasing Agreement Specifications - Part II of Final Bid Document V1 Scope of Services/Specifications- Part III of Final Bid Document V1 Standard Purchasing Terms and Conditions - Part IV of Final Bid Document V1 Attachments - Part V of Final Bid Document V1 Conflict of Interest Disclosure Requirement** - Attachment A of Final Bid Document V1 Vendor s Contact Information** - Attachment B of Final Bid Document V1 Consideration of Location of Bidder's Principal Place of Business**(if applicable) - Attachment C of Final Bid Document V1 Reference Sheet** Attachment D of Final Bid Document V1 How to Register with the City of Fort Worth - Attachment E of Final Bid Document V1 No Bid Sheet - Attachment F of Final Bid Document V1 **Required to be completed and submitted. See Section 20.0, Part 2 for all required document submission. Documents are hereby incorporated into this Solicitation by reference, with the same force and effect as if they were incorporated in full text. CITY OF FORT WORTH BID OFFER Event ID Page Invited: PUBLIC EVENT DETAILS CFW01-20-0162 2 Event Round Version Submit To: City of Fort Worth 1 1 PURCHASING DIVISION Event Name LOWER LEVEL CITY HALL ITB Saw Blades 200 TEXAS ST. Start Time Finish Time Fort Worth TX 76102 07/01/2020 08:00:00 CDT 07/16/2020 13:30:00 CDT United States Email: [email protected] The undersigned, by his/her signature, represents that he/she is submitting a binding offer and is authorized to bind the respondent to fully comply with the solicitation document contained herein. The Respondent, by submitting and signing below, acknowledges that he/she has received and read the entire document packet sections defined above including all documents incorporated by reference, and agrees to be bound by the terms therein. Legal Company Name:_________________________________________________ Company Address:________________________________________ City, State, Zip:_______________________________________ Vendor Registration No._______________________________________ Printed Name of Officer or Authorized Representative: ______________ Title: ______________________________________________________ Signature of Officer or Authorized Representative:__________________ Date:___________________________________________________________ Email Address:___________________________________________________ Phone Number: ________________________________________________ Federal Identification Number (FID): _________________________________ CITY OF FORT WORTH BID OFFER Event ID Page Invited: PUBLIC EVENT DETAILS CFW01-20-0162 3 Event Round Version Submit To: City of Fort Worth 1 1 PURCHASING DIVISION Event Name LOWER LEVEL CITY HALL ITB Saw Blades 200 TEXAS ST. Start Time Finish Time Fort Worth TX 76102 07/01/2020 08:00:00 CDT 07/16/2020 13:30:00 CDT United States Email: [email protected] Line Details Line: 1 Description: Qty Unit UnitPrice Total Band Saw, Part: Blade, 11 FT, 5 IN x 1 IN x 7.00 EA 0.035 IN, 10-14 Teeth/Inch Brand:___________ Line: 2 Description: Qty Unit UnitPrice Total PVC/ABS Saw, 18 IN Brand:___________ 12.00 EA Line: 3 Description: Qty Unit UnitPrice Total Circular Saw, Part: Blade, 7-1/4 IN, 40 Teeth 7.00 EA Brand:___________ Line: 4 Description: Qty Unit UnitPrice Total Circular Saw, Part: Blade, 10 IN 7.00 EA Brand:___________ Line: 5 Description: Qty Unit UnitPrice Total Band Saw, Part: Blade, 2' 8-7/8", 14/18 7.00 EA Teeth/Inch, For Metal Brand:___________ Line: 6 Description: Qty Unit UnitPrice Total Band Saw, Part: Blade, 18 Teeth/Inch, for 7.00 EA Handheld Saw Brand:___________ Line: 7 Description: Qty Unit UnitPrice Total Reciprocating Saw, Part: Blade, 6 IN, 10 32.00 EA Teeth/Inch Brand:___________ Line: 8 Description: Qty Unit UnitPrice Total Reciprocating Saw, Part: Blade, 9 IN 32.00 EA Brand:___________ CITY OF FORT WORTH BID OFFER Event ID Page Invited: PUBLIC EVENT DETAILS CFW01-20-0162 4 Event Round Version Submit To: City of Fort Worth 1 1 PURCHASING DIVISION Event Name LOWER LEVEL CITY HALL ITB Saw Blades 200 TEXAS ST. Start Time Finish Time Fort Worth TX 76102 07/01/2020 08:00:00 CDT 07/16/2020 13:30:00 CDT United States Email: [email protected] Line: 9 Description: Qty Unit UnitPrice Total Pipe Saw, Part: Blade, 12 IN x 1/8 IN x 1 IN 7.00 EA Arbor Brand:___________ Line: 10 Description: Qty Unit UnitPrice Total Pipe Saw, Part: Cutter Wheel, 14 IN x 0.105 7.00 EA IN x 1 IN Arbor Brand:___________ Line: 11 Description: Qty Unit UnitPrice Total Belt, Single Vee, for Makita Gas Powered Saw 7.00 EA Brand:___________ Line: 12 Description: Qty Unit UnitPrice Total Pipe Saw, Part: Blade, 12 IN x 1/8 IN x 1 IN 17.00 EA Arbor, for Concrete/Masonry Brand:___________ Line: 13 Description: Qty Unit UnitPrice Total Pipe Saw, Part: Blade, 12 IN x 1/8 IN x 1 IN 17.00 EA Arbor, for Ductile Iron Brand:___________ Line: 14 Description: Qty Unit UnitPrice Total Pipe Saw, Part: Blade, 14 IN x 1/8 IN x 1 IN 7.00 EA Arbor, for Concrete/Masonry Brand:___________ Line: 15 Description: Qty Unit UnitPrice Total Chop Saw, Part: Blade, 16 IN x 1/8 IN x 1 IN 7.00 EA Arbor, for Steel Cutting, 4710 Max RPM Brand:___________ Line: 16 Description: Qty Unit UnitPrice Total Concrete Saw, Part: Blade, 16 IN x 3/16 IN x 7.00 EA 20mm Arbor Brand:___________ Line: 17 Description: Qty Unit UnitPrice Total Concrete Saw Blade 14" 7hp Brand:___________ 5.00 EA CITY OF FORT WORTH BID OFFER Event ID Page Invited: PUBLIC EVENT DETAILS CFW01-20-0162 5 Event Round Version Submit To: City of Fort Worth 1 1 PURCHASING DIVISION Event Name LOWER LEVEL CITY HALL ITB Saw Blades 200 TEXAS ST. Start Time Finish Time Fort Worth TX 76102 07/01/2020 08:00:00 CDT 07/16/2020 13:30:00 CDT United States Email: [email protected] Line: 18 Description: Qty Unit UnitPrice Total Asphalt Cutting Blade 14" 7hp 5.00 EA Brand:___________ Line: 19 Description: Qty Unit UnitPrice Total Saw Blade for Cured Concrete 14" x 1/4" x 1" 5.00 EA Abrasive Model: Gold RTC Brand:___________ Line: 20 Description: Qty Unit UnitPrice Total Saw Blade for Metal 12" x 1/8" x 1" Abrasive 15.00 EA Model: Blue QHS-MS Brand:___________ Line: 21 Description: Qty Unit UnitPrice Total Saw Blade for Asphalt 12" x .250 x 1" 4.00 EA Diamond Tip Husqvarna P# 580231 Line: 22 Description: Qty Unit UnitPrice Total Saw Blade for Concrete Diamond Tip 14" x 4.00 EA .125" x 1" Vanguard Series 11 Model: Gold 150V 5.4hp Husqvarna P# 773211 Line: 23 Description: Qty Unit UnitPrice Total Saw Blade for Cured Concrete 24" x .155" x 4.00 EA 1" Diamond Tip Vanguard Series II Model: Blue 250V Husqvarna P# 773227 Line: 24 Description: Qty Unit UnitPrice Total Saw Blade for Cured Concrete (Wet Cut) 20" x 4.00 EA .125 x 1" D.P. Model: Blue 250 V Vanguard II Series Husqvarna P# 773216 Line: 25 Description: Qty Unit UnitPrice Total Saw Blade for Cured Concrete (Wet Cut) 18" x 4.00 EA .125 x 1" D.P.
Load more

Recommended publications
  • Concrete Equipment
    S A L E S R E 2020 N T of Lincoln HAMILTONA EQUIPMENT CO. L 8801 Highway 6, Lincoln, NE 68507 (402)S 464-6381 C H O O N M S E PRODUCTST O & PRICING ON WEBSITE: R W U N bobcatoflincoln.comC E • hamiltonequipmentco.com T R I S O N ARTICULATED LOADER DOOSAN HONDA GENERATORS COMPACT EXCAVATOR AIR COMPRESSORS MOWERS/WATER PUMPS COMPACT TRACK LOADERHavelock& ACCESSORIES Ave Centrifugal Pump SKID STEER LOADER Blow Pipe Electric Submersible ZERO TURN RIDING MOWERS 70th St. Trash Pump MINI TRACK LOADER Breaker Hammer UTILITY VEHICLES AdamsChipping St. Hammer Generators UTILITY VEHICLES Hose Waterbed Pump TRACTOR & ATTACHMENTS VERSAHANDLER Pole Tamper Mowers SEEDING EQUIPMENT Trimmers BOBCAT ATTACHMENTS Aerator YARD CARE Auger Angle Broom Box Scraper Auger Aerator Mower Auger 1 & 2 Man Bale Spear CONCRETE-DEMO PRODUCTS Food Plot Seeder Breaker Bed Edger COMPACTION EQUIPMENT Overseeder Brushcat Cable Layer/Paver Primary Seeder Brush Saw Brick Saw Hedge Trimmer Pulverizer Dozer Blade Cement Mixer Lawn Edger Rear Blade Exhaust Purifier Concrete Vibrator Lawn Mower Tiller Grader Blade Cut Break-Saw Lawn Roller Grapple Root Cut-Off Saw Lawn Trencher Land Plane Diamond Blades Log Splitter Packer Wheel Electric Hammer Metal Detector Pallet Forks Finish Tools Overseeder Planer Floor Grinder Power Rake Plate Compactor Line Level Sod Cutter Pulverizer Mortar Mixer String Trimmer/Saw Rock Bucket Power Trowel Stump Grinder Snow Blade Power Buggy Tiller Snow Blower Rammer/Jumping Jack Soil Conditioner Soff Cut Saw TRAILERS LIFT EQUIPMENT Deck Over Soil Finisher Tile Saw Drywall Lift Dump Stump Grinder Track Power Buggy Engine Hoist Flatbed Sweeper Trench Compactor Pallet Jack Enclosed Three Point Vibratory Plate Scaffold Water Tiller W.
    [Show full text]
  • Guide to Concrete Repair Second Edition
    ON r in the West August 2015 Guide to Concrete Repair Second Edition Prepared by: Kurt F. von Fay, Civil Engineer Concrete, Geotechnical, and Structural Laboratory U.S. Department of the Interior Bureau of Reclamation Technical Service Center August 2015 Mission Statements The U.S. Department of the Interior protects America’s natural resources and heritage, honors our cultures and tribal communities, and supplies the energy to power our future. The mission of the Bureau of Reclamation is to manage, develop, and protect water and related resources in an environmentally and economically sound manner in the interest of the American public. Acknowledgments Acknowledgment is due the original author of this guide, W. Glenn Smoak, for all his efforts to prepare the first edition. For this edition, many people were involved in conducting research and field work, which provided valuable information for this update, and their contributions and hard work are greatly appreciated. They include Kurt D. Mitchell, Richard Pepin, Gregg Day, Jim Bowen, Dr. Alexander Vaysburd, Dr. Benoit Bissonnette, Maxim Morency, Brandon Poos, Westin Joy, David (Warren) Starbuck, Dr. Matthew Klein, and John (Bret) Robertson. Dr. William F. Kepler obtained much of the funding to prepare this updated guide. Nancy Arthur worked extensively on reviewing and editing the guide specifications sections and was a great help making sure they said what I meant to say. Teri Manross deserves recognition for the numerous hours she put into reviewing, editing and formatting this Guide. The assistance of these and numerous others is gratefully acknowledged. Contents PART I: RECLAMATION'S METHODOLOGY FOR CONCRETE MAINTENANCE AND REPAIR Page A.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • BUILDING CONSTRUCTION TRADES Heavy Construction
    BUILDING CONSTRUCTION TRADES County of El Paso El Paso County EPCHD Davis Classification Prevailing Wage PWR Per Hr. 11/13/01 Bacon Rate 8/11/04 5/12/08 2008 Asbestos/Abatement 10.00 10.00 $10.00 Air Conditioning Mechanic 11.50 13.50 $22.00 Bricklayer 17.84 17.84 $16.92 Acoustical Ceiling Installer 17.84 17.87 $12.50 $10.45 Carpenter - Rough $14.71 $10.79 Carpenter - All other, Millwright $17.78 $14.26 Carpenter 17.87 17.87 Caulker (Sealant) $10.00 $10.00 Cement Mason/ Concrete Finisher 10.50 10.50 $11.91 $11.91 Drywall Installer 19.49 $12.50 Drywall Finishers & Tapers 10.50 $12.50 $8.78 Electrician 19.44 21.27 $25.54 $24.04 Electronic Technician 19.44 9.00 $19.44 Elevator Constructor 20.24 33.34 $46.45 Floor Layer - Resilient & Carpeet 11.00 11.00 $11.50 $12.87 Forklift Operator $9.37 Glazier 11.50 10.82 $10.00 Insulators $10.00 $10.00 Ironworker- Reinforcing/Structural 10.25 10.25 $10.59 8.83/10.59 Irrigator, Certified 18.15 14.50 $8.50 Laborer, Skilled 11.02 15.18 $9.50 Laborer, Common 8.88 8.88 $8.50 $7.95 Manlift $12.13 Millwright 22.01 17.87 $17.78 Operating Engineer- Crane 17.85 17.85 Operating Engineer- Heavy Equip. 16.03 16.03 Operating Engineer- Med. Equip. 15.58 15.58 Operating Engineer- Light Equip. 7.50 8.50 Painter 8.50 8.00 $10.50 $9.17 Paper Hanger $10.50 Plasterer 14.44 11.00 $13.50 $10.86 Plumber $28.45 $14.92 Pipefitters (Heavy 2008 = 43.94) $28.48 $18.15 Plumber & Pipefitter(no HVAC work) 18.15 14.50 Reinforcing Steel Setter 15.37 $11.50 $8.83 Roofer 9.75 9.00 $10.50 Rock Mason 8.00 $9.00 Sheet Metal Worker-all other work (not HVAC) 9.00 14.00 $27.16 $11.23 Sprinkler Fitter 12.85 13.00 $38.60 $38.60 Tile Setter & Terrazo Worker 17.84 9.50 $12.00 $12.02 Tile & Marble Finisher 11.91 n/a $8.01 Truck Driver- Light 8.00 9.00 $9.00 $9.00 Truck Driver- Heavy (over 2,600#) 9.50 8.00 $14.69 Caulker (Sealant) 9.50 9.50 $10.00 Concrete Saw Cutter 9.50 n/a Mechanic 9.25 $14.00 Heavy Construction County of El Paso El Paso County EPCHD Davis Classification Prevailing Wage PWR Per Hr.
    [Show full text]
  • Operator Manual Warning: Read and Understand All Safety Warnings and All Instructions Before You Use This Equipment
    680ES OPERATOR MANUAL WARNING: READ AND UNDERSTAND ALL SAFETY WARNINGS AND ALL INSTRUCTIONS BEFORE YOU USE THIS EQUIPMENT. Failure to follow the warnings and instructions may result in fire, serious injury, or death. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE Original Document © 2015 ICS®, Blount International Inc. Specifications are subject to change without notice. REV021216 F/N 577451 680ES OPERATOR MANUAL This instruction manual contains translations of a manual drafted in English and are provided to assist those who do not speak English as their first language. Being a technical writing, some terms may not have a like or equivalent meaning as translated. Therefore, you should not rely on this translation, and should cross-reference the English version, where relying on the translated instructions ENGLISH could result in harm to your person or property. © 2015 ICS®, Blount International Inc. Specifications are subject to 2 change without notice. REV021216 F/N 577451 680ES OPERATOR MANUAL Table of Contents TABLE OF CONTENTS SYMBOLS AND LABELS 4 ICS 680ES NAMES AND TERMS 7 PRODUCT IDENTIFICATION 9 INTRODUCTION 10 SAFETY RULES 11 UNPACKING AND ASSEMBLY 15 FUELING 22 OPERATION 25 TRANSPORTING & STORING 36 MAINTENANCE 37 TROUBLESHOOTING 45 REFERENCE 46 EMISSIONS 47 TECHNICAL SPECIFICATIONS 49 SERVICE CENTERS 50 DECLARATION OF CONFORMITY 51 © 2015 ICS®, Blount International Inc. Specifications are subject to change without notice. REV021216 F/N 577451 3 Symbols & Labels 680ES OPERATOR MANUAL SYMBOLS AND LABELS THE FOLLOWING SYMBOLS ARE FOUND THROUGHOUT THIS MANUAL AND/OR ON THE SAW AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR UNSAFE PRACTICES. ENGLISH SAFETY ALERT READ INSTRUCTIONS WEAR EYE, HEARING AND Indicates that the text that The original instruction manual RESPIRATORY PROTECTION follows explains a danger, contains important safety and WEAR HEAD PROTECTION warning or caution.
    [Show full text]
  • Edmar Diamond Blade Training Manual 2 What Is a Diamond Blade?
    DIAMOND BLADE BASICS Edmar Diamond Blade Training Manual 2 What is a Diamond Blade? Continuous Turbo Segmented Edmar Diamond Blade Training Manual 3 What is a Diamond Blade? The blade core is a precision-made steel disc which may or may not have slots. Blade cores are tensioned so that the blade will run straight at the proper cutting speed. Proper tension also allows the blade to remain flexible enough to bend slightly under cutting pressure and then go back to it’s original position. Diamond segments or rims are made up of a mixture of diamonds and metal powders. The diamonds used in bits and blades are man-made (synthetic) and are carefully selected for their shape, quality, friability, and size. These carefully selected diamonds are then mixed with a powder consisting of metals such as cobalt, iron, tungsten, carbide, copper, bronze, and other materials. This mixture is then molded into shape and then heated at temperatures from 1700˚ to 2300˚ under pressure to form a solid metal part called the “bond” or “matrix.” The segment or rim is slightly wider than the blade core. This side clearance allows the cutting edge to penetrate the material being cut without the steel dragging against the sides of the cut. After the blade is assembled it is “opened,” “broken in,” or, “dressed” by grinding the edge concentric to the center. This exposes the diamonds that will be doing the work and establishes the cutting direction as noted by the direction of the arrow stamped into the blade. Edmar Diamond Blade Training Manual 4 Edmar Diamond Blade
    [Show full text]
  • CX-3® Gas Powered Concrete
    www.mkdiamond.com CX-3® OWNER’S MANUAL & OPERATING INSTRUCTIONS Gas Powered Concrete Saw Revision 105 07.2012 Manual Part# 159345 Caution: Read all safety and operating instructions before using this equipment. This owner’s manual MUST accompany the equipment at all times. INTRODUCTION Congratulations on your purchase of a CX-3® Concrete Saw. We are certain that you will be pleased with your purchase. MK Diamond takes pride in producing the finest construction power tools and diamond blades in the industry. Operated correctly, your CX-3® Concrete Saw should provide you with years of service. In order to help you, we have included this manual. This owners manual contains information necessary to op- erate and maintain your CX-3® Concrete Saw safely and correctly. Please take the time to familiarize yourself with the CX-3® Concrete Saw by reading and reviewing this manual. Read and follow all safety, operating and maintenance instructions. If you should have questions concerning your CX-3® Concrete Saw, please feel free to call our friend- ly customer service department at: 800 421-5830 Regards, MK Diamond NOTE THIS INFORMATION FOR FUTURE USE: MODEL NUMBER: SERIAL NUMBER: PURCHASE PLACE: PURCHASE DATE: NOTE: For your (1) one year warranty to be effective, complete the warranty card (including the Serial Number) and mail it in as soon as possible. 2 TABLE OF CONTENTS SAFETY Safety Messages 4 Damage Prevention Message 4 General Safety Precautions and Hazard Symbols 5 California Proposition 65 Message 8 Prestart Safety 9 Safety Label Locations
    [Show full text]
  • Diamond Blade Overview
    DIAMOND BLADE OVERVIEW Variables in Cutting The segment is the part of the blade that actually does the cutting. A measured quantity of manufactured diamonds are mixed to- gether with a specific combination of powdered metals (the matrix) and processed in graphite molds at a high temperature and high pressure to form individual segments. • Diamond blades do not really cut, instead they grind through material. • The diamond crystals remove material by scratching out particles of hard, dense materials, or by knocking out larger particles of loosely bonded abrasive material. CONTINUOUS SMOOTH RIM • Provides clean, smooth cuts on: Glazed ceramic tile, marble, granite, porcelain and quarry tile • Wet and dry specs available • Sizes: 4" – 14" diameters SERRATED / TURBO RIM • Provides fast cutting with minimal chipping on: Roof tile, unglazed tile, masonry, brick, block, paver, stone and concrete • Dry specs (can be used with water) • Sizes: 4" – 16" diameters SEGMENTED RIM • Provides maximum life and cutting strength: Concrete, reinforced concrete, asphalt, masonry, brick, block, paver and stone • Wet and dry specs available • Sizes: 4" – 60" diameters 1 www.mkdiamond.com Training Manual WET & DRY CUTTING TYPES OF CUTTING • There are two basic types of cutting – dry or wet. • The best choice of blade depends upon: - the requirements of the job - the machine/tool utilizing the diamond blade - the preference of the operator DRY CUTTING DIAMOND BLADES Because of the overwhelming popularity of handheld saws, and the flexible nature of MK diamond blades to professionally handle most ceramic, masonry, stone and concrete materials, the dry cutting blade is very attractive. Dry cutting blades are also used where water is not permitted or not convenient or where so little cutting is required that set-up of water cooled equipment would be inefficient.
    [Show full text]
  • WARNING WALK-BEHIND CONCRETE SAW Any Piece of Equipment Can Be Dangerous If Not Operated Properly. YOU Are Responsible for the Safe Operation of This Equipment
    WARNING WALK-BEHIND CONCRETE SAW Any piece of equipment can be dangerous if not operated properly. YOU are responsible for the safe operation of this equipment. The operator must carefully read and follow any warnings, safety signs and instructions provided with or located on the equipment. Do not remove, defeat, deface or render inoperable any of the safety devices or warnings on this equipment. If any safety devices or warnings have been removed, defeated, defaced or rendered inoperable, DO NOT USE THIS EQUIPMENT!!! WARNING! This product contains or produces one or more chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Use extreme caution whenever operating, moving, loading or unloading this equipment. During and after operation the Muffler and other components are Extremely Hot and will cause Serious Burns. Never operate power equipment of any kind if you are tired or if you are under the influence of alcohol, drugs, medication or any substance that could affect your ability or judgment. Be alert! If you get tired while operating this equipment, take a break. Tiredness may result in loss of control. Provide adequate ventilation when operating this equipment. Internal combustion engines consume oxygen and give off deadly carbon monoxide gas. DANGER: This equipment has multiple pinch points that can cause dismemberment or death. Keep hands, feet and all other body parts clear at all times. Warning: These machines can weigh up to 225 pounds use caution while lifting and moving. SMI Dust and Silica Warning Using this equipment generates dust, this dust may contain Grinding/cutting/drilling particles from masonry, concrete, metal and other materials, mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as respiratory disease, cancer, birth defects or other reproductive harm.
    [Show full text]
  • Original Instructions
    Original Instructions 009-0001, 009-0001X, 010-0001, 010-0001X, 009-0002, 009-0002X, 010-0002, 010-0002X, 009-0003, 009-0003X, 010-0003, 010-0003X, 009-0004, 009-0004X, 010-0004, 010-0004X, 009-0006, 009-0006X 010-0006, 010-0006X 012-0001, 012-0001X, 012-0001A, 012-0001AX, 012-0002, 012-0002X, 012-0002A, 012-0002AX, 012-0003, 012-0003X, 012-0003A, 012-0003AX, 012-0004, 012-0004X, 012-0004A, 012-0004AX, 012-0006, 012-0006X 012-0006A, 012-0006AX 5015647 Originally written in UK English Date Published: 21 / 05 / 2020 www.evolutionpowertools.com This Instruction Manual was originally Evolution Power Tools will, within the written in English. guarantee period, and from the original date of purchase, repair or replace any IMPORTANT goods found to be defective in materials or workmanship. This guarantee is void if the Please read these operating and safety tool being returned has been used beyond instructions carefully and completely. the recommendations in the Instruction For your own safety, if you are uncertain Manual or if the machine has been damaged about any aspect of using this equipment by accident, neglect, or improper service. please access the relevant Technical Helpline, This guarantee does not apply to machines the number of which can be found on the and / or components which have been Evolution Power Tools website. We operate altered, changed, or modified in any way, several Helplines throughout our worldwide or subjected to use beyond recommended organization, but Technical help is also capacities and specifications. Electrical available from your supplier. components are subject to respective manufacturers’ warranties.
    [Show full text]
  • Multi-Material Cutting Saws
    MULTI-MATERIAL CUTTING SAWS & CONTRACTOR TOOLS EVOLUTION’S RELIABLE & MULTI-MATERIAL POWERFUL MOTORS Hi-Torque Gearbox & Patented Blade System, CUTTING For Increased Motor & Blade-Life. TECHNOLOGY DURABLE MATERIALS YOU CAN CUT: & SAFE Machines Tested For ‘Best-In-Class’. MILD STEEL ALUMINIUM WOOD PLASTICS 3 Year Limited Warranty*. Cuts Without Heat, P ANGLED STEEL, P ARMOURED CABLES P HARDWOOD & P ELECTRICAL CONDUIT Burr-Free & Virtually No Sparks. TANALISED DECKING BOX SECTION & TUBE P CABLE TRAY P PLASTIC PIPES *3 Year Warranty. Saws only. P MDF LAMINATES P METAL STUD P COPPER PLUMBING P PLEXIGLASS P MOULDINGS P DRY LINING P FLOOR EDGINGS P RUBBER & REINFORCED P RECLAIMED TIMBER P REBAR DOMESTIC P ROOF FLASHINGS HOSES WITH NAILS BUILDS P STAIR NOSINGS P WPC COMPOSITES P SCAFFOLD BOARDS P RSJ DOMESTIC BUILDS P STUDWORK TIMBER P STEEL PLATE (6MM) ACCURATE & EASY TO USE TOOLS Clean & Consistent Precision Cuts. DIAMOND BLADES: Clear & Concise Adjustment Settings. STONE Segmented Rim Blades Continuous Rim Blades P BLOCK PAVING (ø 185mm, ø 305mm (ø 210mm and ø 255mm). and ø 355mm) P COPING STONES Provides the smoothest cut in Hot pressed turbo segmented rim ceramic tiles and ornamental stone. P INCREASED ROOFING TILE REPAIRS for consistent cutting ability. *Diamond blades fit on Evolution P UNGLAZED CERAMICS multipurpose saws only. PRODUCTIVITY Unlike Abrasive Discs, TCT Blades’ Depth-of-Cut Remain Constant Throughout Blade Life = PERFECT FOR: Longer Life & Fewer Blade Changes. P BUILDERS P ARCHITECTURAL P FENCING CONTRACTORS P DRIVEWAY, PATH & METALWORKERS PATIO INSTALLERS P CARPENTERS P DIY ENTHUSIASTS P ROOFING CONTRACTORS & UPCYCLERS P MAINTENANCE P AUTO MECHANICS P DRY LINERS P ELECTRICAL FITTERS TECHNICIANS P INDUSTRIAL FITTERS WOOD WITH P LANDSCAPERS P FLOOR FITTERS P WINDOW INSTALLERS P PROPERTY & LOFT EMBEDDED NAILS CONVERTERS P PIPEFITTERS P CEILING FIXERS P KITCHEN FITTERS P FABRICATORS P PLUMBERS Cuts Nail-Embedded Wood Easily When Working With Reclaimed Materials.
    [Show full text]
  • CSDA BP016 Silica Data Analysis Chart
    Best Practice Title: Silica Data Analysis Chart Issue No.: CSDA-BP-016 Effective Date: Mar 13, 2014 Introduction The CSDA Silica Data Analysis Chart is based on extremely thorough data collection from member jobsites and from the National Institute for Occupational Safety and Health (NIOSH). It has been developed for operators to use on jobsites to determine if respiratory protection is needed and, if so, what type of protection is recommended. The aim of the chart is to simplify procedures and help protect workers. Sample time NIOSH Task Tool Controls Ventilation Environment Results HH:MM Recommendations saw equipped with Indoor Wall hydraulic wall water supply/ slurry None enclosed area 0.04 7:17 Sawing saw clean up saw equipped with enclosed area; Indoor Wall hydraulic wall water supply/ slurry None 3rd floor of 0.068 7:24 Sawing saw clean up building saw equipped with Indoor Wall hydraulic wall N100 Disposable water supply/ slurry None enclosed area 0.159 6:50 Sawing saw respirators clean up saw equipped with Indoor Wall hydraulic wall N100 Disposable water supply/ slurry None enclosed area 0.109 7:30 Sawing saw respirators clean up Indoor Wall saw equipped with N100 Disposable wall saw None Indoors .06-.22 4:54 Sawing water supply respirators Indoor Wall hydraulic wall saw equipped with N100 Disposable None Indoors 0.09 8:00 Sawing saw water supply respirators Indoor Wall hydraulic wall saw equipped with None Indoors 0.066 1:17 Sawing saw water supply saw equipped with hydraulic wall Wall Sawing water supply / N95 Natural Open Air
    [Show full text]