DOCSLIB.ORG

Plumbing Valves

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Plumbing Valves PLUMBING VALVES www.americanvalve.com Contents Ball Valves 85CBK 10 M75CNK 16 G100 LEAD-FREE 1 87CBK 10 M75SNK 16 M100 1 88C 10 M76NK 16 G100VL LEAD-FREE 1 G100S LEAD-FREE 2 Stops Quarter Turn M100S 2 G50 LEAD-FREE 11 Hose End Valves G111 LEAD-FREE 2 G50S LEAD-FREE 11 M71QT 17 G200W LEAD-FREE 2 G60 LEAD-FREE 11 M74QT 17 G200SW LEAD-FREE 3 G60S LEAD-FREE 11 M74SQT 17 G200C LEAD-FREE 3 G63 12 M75QT 17 G200BXB LEAD-FREE 3 G64 12 M76QT 17 2A 3 G65 12 G66 LEAD-FREE 12 Washing Machine Gate Valves & Utility Valves G300 LEAD-FREE 4 Boiler Drains WMV 18 G300S LEAD-FREE 4 M75 13 OPWMV 18 3/3F 5 M75C 13 WMVCOMP 18 3S/3FS 5 M76 13 WMVFRONT 18 3R 6 WM75 13 SV 18 3FG 6 M75LS 13 ASTV 18 4FG 6 WM75CQT 19 Globe & Check Valves Bent Nose Garden Valves WM75CPVCQT 19 13 7 M78 14 WM75QT 19 14N 7 M78INV 14 WM76QT 19 M31 7 WM75PQT 19 G31 LEAD-FREE 7 Sillcocks & WM75LQT 19 M31S 8 Frost Proof Sillcocks G31S 8 M74 15 Heating Valves M31SL 8 M74S 15 9 20 G31SL LEAD-FREE 8 M72AS 15 9D 20 MVB 15 7 20 Gas Service Valves MVB2 15 45 20 M88C 9 45S 20 M88CF 9 Hose Bibbs 46 20 M88CF12 9 M71 16 46S 20 M88CF38A 9 M71HD 16 M88CF58 9 M75NK 16 INDUSTRY-LEADING INNOVATION OUR INDUSTRY-LEADING TECHNOLOGY IS MAKING YOUR WATER SAFE. Plumbing valves from American Valve are Every valve is tested for closing tightness and designed and monitored to minimize the impact functionality to ensure safe, dependable operation. of harmful chemicals on the health and safety of people and the environment. We offer a full Brass valves from American Valve meet the array of brass and bronze valves certified widest range of code approvals in the market. to meet ANSI/NSF Standard 61, California Our products are certified to USA and international Proposition 65, and AB 1953. standards by Underwriters Laboratories, CSA International, Factory Mutual, IAPMO, and the We start with the finest materials available. Our American Society of Sanitary Engineering. raw materials are carefully monitored to ensure proper chemical composition. 1.800.645.0101 www.americanvalve.com Like us on Facebook.com/AmericanValve Follow us on Twitter.com/AmericanValve Ball Valves G100 LEAD-FREE Size Box Qty. Ball Valve with FIP ¼ 12 Threaded Ends ⅜ 12 • Full Port ½ 24 • PTFE Seats ¾ 24 • PTFE Packing 1 8 • 600 WOG 1 ¼ 4 1 ½ 4 2 2 2 ½ 2 3 2 4 1 M100 Size Box Qty. Ball Valve with FIP ¼ 12 Threaded Ends ⅜ 12 • 600 WOG (¼" - 2") ½ 24 • 150 psi Saturated Steam ¾ 24 • 400 WOG (2½" - 4") 1 8 • Conforms to MSS-SP-110 1 ¼ 4 • CSA Listed (½" - 2") 1 ½ 4 • Full Port 2 2 • PTFE Seats 2 ½ 2 • PTFE Packing 3 2 • UL Listed (¼" - 2") • FM Listed (½" - 2") 4 2 Not intended to convey water for human consumption G100VL LEAD-FREE Size Box Qty. Ball Valve with Push-Fit Ends ½ 6 • For use with PEX, Copper and CPVC ¾ 3 1 3 www.americanvalve.com 1 1.800.645.01010000 Ball Valves G100S LEAD-FREE Size Box Qty. Ball Valve with Solder Ends ½ 30 • Full Port ¾ 20 • PTFE Seats 1 5 • PTFE Packing 1¼ 12 • 600 WOG 1 ½ 8 2 4 2 ½ 2 3 2 4 1 M100S Size Box Qty. Ball Valve with Solder Ends ⅜ 12 • Full Port ½ 30 • PTFE Seats ¾ 20 • PTFE Packing 1 5 • 600 WOG 1 ¼ 12 1 ½ 8 2 4 Not intended to convey water for human consumption 2 ½ 2 3 2 4 2 G111 LEAD-FREE Size Box Qty. Ball Valve with Press-Fit Ends ½ 50 ¾ 30 • Leak Indicator 1 18 • Full Port 1 ¼ 12 • 200 PSI Connection 1 ½ 10 • 250°F Maximum Temperature 2 8 • Recommended for Rigid RP330 • Use only with hard drawn copper tube 2 ½ 1 3 1 4 1 G200W LEAD-FREE Size Box Qty. Ball Valve with FIP ½ 6 Threaded Ends ¾ 5 • Waste & Cap 1 10 • Full Port • PTFE Seats • PTFE Packing • 600 WOG www.americanvalve.com 2 1.800.645.01010000 Ball Valves G200SW LEAD-FREE Size Box Qty. Ball Valve with Solder Ends ½ 12 • Full Port ¾ 6 • PTFE Seats 1 4 • PTFE Packing • Waste & Cap G200C LEAD-FREE Size Box Qty. Ball Valve with Compression Ends ½ 6 • Full Port ¾ 4 • PTFE Seals 1 3 • 400 WOG • Blow-Out Proof Stem G200BXB LEAD-FREE Size Box Qty. Ball Valve with PEX Ends ⅜ 8 • 400 WOG ½ 8 ¾ 8 1 6 2A Size Box Qty. Industrial Ball Valve with FIP ½ 10 Threaded Ends ¾ 10 • PTFE Seats 1 4 • PTFE Packing *INTENDED FOR USE IN • 600 WOG INDUSTRIAL APPLICATIONS • Blow-Out Proof Stem Not intended to convey water for human consumption www.americanvalve.com 3 1.800.645.01010000 Gate Valves G300 LEAD-FREE Size Box Qty. Full Pattern Gate Valve with ¼ 24 FIP Threaded Ends ⅜ 24 • Non-rising Stem ½ 8 • Solid Wedge Disc ¾ 10 • 200 WOG 1 6 1 ¼ 2 1 ½ 2 2 2 2 ½ 2 3 1 4 1 G300S LEAD-FREE Size Box Qty. Full Pattern Gate Valve with ½ 10 Solder Ends ¾ 6 • Non-rising Stem • Solid Wedge Disc • 200 WOG www.americanvalve.com 4 1.800.645.01010000 Gate Valves 3/3F LEAD-FREE Size Box Qty. Gate Valve-125 Class, ¼ 15 with FIP Threaded Ends ⅜ 15 • Non-rising Stem ½ 12 • Solid Wedge Disc ¾ 18 • PTFE Packing 1 12 • 200 WOG 1 ¼ 8 • 125 WSP 1 ½ 4 • Dimensions and Workmanship 2 2 Conforms to MSS-SP-80 2 ½ 1 3 1 4 1 3S/3FS LEAD-FREE Size Box Qty. Gate Valve-125 Class, ½ 12 with Solder Ends ¾ 12 • Non-rising Stem 1 6 • Solid Wedge Disc 1 ¼ 4 • PTFE Packing 1 ½ 4 • 200 WOG 2 2 • 125 WSP 2 ½ 1 • Dimensions and Workmanship 3 1 Conforms to MSS-SP-80 4 1 www.americanvalve.com 5 1.800.645.01010000 Gate Valves 3R LEAD-FREE Size Box Qty. Gate Valve with ½ 12 FIP Threaded Ends ¾ 18 • Non-rising Stem 125 Class 1 12 • Double O-Ring Stem Seal for 1 ¼ 8 Pump and Underground Service 1 ½ 4 • Solid Wedge Disc 2 2 • 200 WOG 2 ½ 1 • 125 WSP 3 1 3FG LEAD-FREE Size Box Qty. Bronze Gate Valve with ½ 10 FIP Threaded Ends ¾ 8 • Non-rising Stem 150 Class 1 12 • Solid Wedge Disc 1 ¼ 4 • PTFE Packing 1 ½ 4 • 300 WOG 2 2 • 150 WSP 2 ½ 1 • Dimensions and Workmanship 3 1 Conforms to MSS-SP-80 4FG LEAD-FREE Size Box Qty. Bronze Gate Valve with ½ 18 FIP Threaded Ends ¾ 12 • Rising Stem 150 Class 1 8 • Solid Slip-On Wedge Disk 1 ¼ 8 • PTFE Packing 1 ½ 4 • 300 WOG 2 2 • 150 WSP • Dimensions and Workmanship Conforms to MSS-SP-80 www.americanvalve.com 6 1.800.645.01010000 Globe & Check Valves 13 Size Box Qty. Bronze Globe Valve with ¼ 12 FIP Threaded Ends ⅜ 12 • Bronze Disk ½ 12 • PTFE Packing ¾ 6 • 200 WOG 1 6 • 125 WSP 1 ¼ 4 Not intended to convey water 1 ½ 2 for human consumption 2 2 14N Size Box Qty. Bronze Angle Valve with ¼ 12 FIP Threaded Ends ⅜ 12 • Neoprene Disk ½ 12 • 200 WOG ¾ 6 1 6 1 ¼ 4 1 ½ 2 Not intended to convey water for human consumption 2 2 M31 Size Box Qty. Brass Swing Check Valve with ½ 6 FIP Threaded Ends ¾ 6 • 200 WOG 1 3 1 ¼ 2 Not intended to convey water for Human Consumption 1 ½ 2 2 2 2 ½ 1 3 1 4 1 G31 LEAD-FREE Size Box Qty. Swing Check Valve with ½ 6 FIP Threaded Ends ¾ 6 • 200 WOG 1 3 1¼ 2 1 ½ 2 2 2 2 ½ 1 3 1 4 1 www.americanvalve.com 7 1.800.645.01010000 Globe & Check Valves M31S Size Box Qty. Brass Swing Check Valve ½ 10 with Solder Ends ¾ 10 1 10 • 200 WOG 1¼ 5 Not intended to convey water 1 ½ 4 for human consumption 2 2 G31S LEAD-FREE Size Box Qty. Brass Swing Check Valve ½ 10 with Solder Ends ¾ 10 1 10 • 200 WOG 1¼ 5 1 ½ 4 2 2 M31SL Size Box Qty. Brass Spring Check Valve with ¾ 6 FIP Threaded Ends 1 3 • Inline Check 1 ¼ 3 • 200 WOG • May be used vertically or horizontally Not intended to convey water for human consumption G31SL LEAD-FREE Size Box Qty. Brass Spring Check Valve with ¾ 6 FIP Threaded Ends 1 3 • Inline Check 1 ¼ 2 • 200 WOG • May be used vertically or horizontally www.americanvalve.com 8 1.800.645.01010000 Gas Service Valves M88C Size Box Qty. Gas Ball Valve with FIP ⅜ 8 Threaded Ends ½ 20 • Quarter Turn ¾ 6 • PTFE Seats 1 4 1 ¼ 4 • Chrome Plated Ball 1 ½ 4 Not intended to convey water for 2 2 Human Consumption M88CF Size Box Qty. Gas Appliance Connector ⅜ 12 Valve with Flare Ends ½ 12 • Quarter Turn • PTFE Seat • Chrome Plated Ball Not intended to convey water for human consumption M88CF12 Model Size Box Qty. M88CF38A M88CF12 ½ x ½ FL 12 M88CF58 M88CF38A ½ x ⅜ FL 36 Gas Appliance M88CF58 ¾ x ⅝ FL 10 Connector Valve • FIP Threaded Ends x Flare Fitting • Quarter Turn • Chrome Plated Ball • PTFE Seat Not intended to convey water for human consumption www.americanvalve.com 9 1.800.645.01010000 Gas Service Valves 85CBK Size Box Qty. Bronze Gas Cock with ¼ 36 FIP Threaded Ends ⅜ 36 • Square Head ½ 36 • Double Nut ¾ 24 • With Check 1 12 1 ¼ 8 Not intended to convey water for 1 ½ 6 human consumption 2 5 87CBK Size Box Qty. Bronze Gas Cock with ¼ 36 FIP Threaded Ends ⅜ 36 • Tee Handle ½ 36 • Double Nut ¾ 24 • With Check 1 12 1 ¼ 8 Not intended to convey water for 1 ½ 6 human consumption 2 5 88C Size Box Qty.
Load more

Recommended publications
  • Products & Services
    PRODUCTS & SERVICES Gate • Globe • Check • Ball www.coopervalves.com | [email protected] Table of Contents Company Information ........................................................................................................ 3 Our Cooper Valves™ ........................................................................................................... 4 About Our COOPER® Products ........................................................................................... 5 Applications ........................................................................................................................ 5 COOPER® Features ............................................................................................................ 5 Our Services ....................................................................................................................... 6 Why Consider COOPER® Valves? ......................................................................................... 7 Certifications ...................................................................................................................... 7 COOPER® Valves Engineering ............................................................................................. 8 Material List ....................................................................................................................... 9 Gate Valves ....................................................................................................................... 10 Gate Valve Expanded View
    [Show full text]
  • NEWCO Cast Steel Valves
    NEWCO Cast Steel Valves NEWCO Cast Steel Valves Gates Sizes: 2” to 54” (50 mm to 1350 mm) Cameron’s NEWCO® cast steel gate, Classes: 150 to 1500 globe and check valves exceed all industry design requirements. These NEWCO cast steel gate valves are ideal for bi-directional flow and tight shutoff. Due to the valves range from 2” to 54” (50 mm flow characteristics of the wedge-to-seat design, to 1350 mm) in pressure classes 150 gate valves should be operated in the full-open to 1500. or full-closed position. Concentrated flow across the seats of a partially opened gate valve risks possible seat damage, therefore throttling is not recommended. Gate valves are utilized in applications where minimum pressure drop is desired. Globes Sizes: 2” to 24” (50 mm to 600 mm) Classes: 150 to 1500 NEWCO cast steel globe valves are ideal for unidirectional, controlled flow. The flow characteristics of a globe valve are repeatable, consistent and easy to control at various open positions, which makes the design ideal for general flow regulation. Note: If line pressure drops below 20%, cavitation, vibration and noise may occur, resulting in hardware damage. If these conditions are likely, consult your Cameron representative for recommendations. Angle Globes Sizes: 2” to 12” (50 mm to 300 mm) Classes: 150 to 600 NEWCO cast steel angle globe valves are ideal for unidirectional, controlled flow. The flow characteristics of an angle globe valve are repeatable, consistent and easy to control at various positions, which makes the design ideal for general flow regulation. Note: If line pressure drops below 20%, cavitation, vibration and noise may occur, resulting in hardware damage.
    [Show full text]
  • Valves for Oil & Gas Industries
    Valves for Oil & Gas Industries Engineered Solutions for Isolation and Control Severe Operating Conditions. Critical Safety Operations. Dependability in Remote Locations. All these factors are key concerns for oil & gas equipment used in upstream, midstream and downstream processes. MOGAS metal- seated isolation and rotary control valves are built for punishing conditions. We understand the crucial need for absolute shutoff and reliable pressure and flow control. Our ongoing application- specific research and development—coupled with in-the-field customer assistance, valve analysis and maintenance / repair service—provides a high level of confidence and support. Advanced production techniques and pipeline processes are creating a demand for not only a new way of operating, but new types of equipment and valves. Production and pipeline components are expected to last longer in order to maximize return on investments—and recognize the true total cost of ownership. This is where MOGAS products excel by outlasting traditional “throw-away” valves, performing reliably in extreme conditions, and being supported with field services you can count on. Oil & Gas Industry Overview Solutions for Challenging Environments FlexStream Innovation MOGAS metal-seated ball valves have proven successful in these applications and more: Cavern Fill and Withdrawal Compressor Anti-Surge Dryer Sequence (Mol-Sieve) Bi-directional Flow Control Emergency Shut Down (ESD) First Stage Separation Gas Metering / Gathering Control High Integrity Pressure Protection Systems (HIPPS) Gas Flow Control High Pressure Gas Injection LNG Feed Gas Main Gas Storage Flow Control Plant Depressurization Control Systems Designed In-House Positive Isolation Tandem Severe Pressure Reduction Control …while handling these conditions and more: Reduced Footprint High pressure drops Multi-phase crude Erosion Sour gas Fugitive emissions Hydrate formations High velocity Noise limitations Liquefied gas Vibration Valves for Oil & Gas Industries © Copyright 07/2014 MOGAS Industries, Inc.
    [Show full text]
  • STANDARD SYMBOLS for PLUMBING, PIPING, and VALVES Plumbing Plumbing (Continued) Pipe Fittings (Continued)
    STANDARD SYMBOLS FOR PLUMBING, PIPING, AND VALVES Plumbing Plumbing (continued) Pipe Fittings (continued) Corner Bathtub................................. Drinking Fountain (Projecting-Type).. Fitting Screwed Soldered Recessed Bathtub............................ Elbow–Long Radius................ L Hot Water Tank................................ HW R T Sitz Bath............................................. Side Outlet Elbow– Water Heater................................... WH Outlet Down......................... Bidet................................................... Meter............................................... Side Outlet Elbow– M Shower Stall....................................... Outlet Up.............................. Hose Rack...................................... Shower Head.................................... HR Base Elbow ............................ .(Plan) (Elev.) Hose Bibb....................................... Double Branch Elbow ............ Overhead Gang Shower...................(P. lan) HB Gas Outlet...................................... (Elev.) Single Sweep Tee................... G Pedestal Lavatory............................... Vacuum Outlet................................ Double Sweep Tee.................. 2 2 Wall Lavatory...................................... Drain............................................... Reducing Elbow...................... 4 4 D Corner Lavatory.................................. Grease Separator........................... Tee.......................................... G Oil Separator.................................
    [Show full text]
  • Forged Steel Valves
    Edward Forged Steel Valves Experience In Motion Table of Contents Figure Number Index 5 Univalve® Stop-Check Valves Class 4500 55 Edward Valves Availability Chart 6 Univalve® Piston Check Valves Class 4500 56 Edward Description of Figure Number System 8 Hydraulic Stop Valves 57 Hydraulic Check Valves 58 Introduction Features and Descriptions of Edward PressurCombo Valves 59 PressurCombo Class 1690 60 High Performance for Critical Service 10 PressurCombo Class 2680 61 A History of Firsts 13 PressurCombo Class 4500 62 Miscellaneous Technical Data 14 Strainers Class 800 and Series 1500 63 Special Application Valves 15 Features and Descriptions of Features and Description of Edward Hermavalve® Hermetically-Sealed Valves 64 Edward Univalve® Globe Valves 16 Part Specification List For Edward Hermavalve® 66 Part Specification List for Edward Univalve® 17 Hermavalve® Hermetically-Sealed Valves 67 Edward Forged Steel Valves Feature Body-Guided Disks 18 Here’s How the Unique Stem-Disk Assembly is Made... 19 Features and Description of Accessories/Actuators Edward Bolted Bonnet Globe Valves 20 Accessories – Forged Steel 68 Part Specification List for Actuators – Forged Steel 69 Edward Bolted Bonnet Globe Valves 21 Required Information for Motor Actuators 70 Forged Steel Valves Reference Blow-Off Valves Class 300 22 Material Chemical Analysis (ASTM) for Edward Valves 72 Blow-Off Valves Class 400 & 600 24 ASME B16.34 – 2009 Pressure/Temperature Ratings 73 Blow-Off Valves Class 1500 & 2500 26 Continuous Blowdown Valves Class 1925 27 Technical Information
    [Show full text]
  • Aquatherm Technical Bulletin
    Aquatherm Technical Bulletin 201304A -AQTTB Aquatherm Valve Applications Date Issued: 18 April 2013 Aquathem offers a variety of valves in our catalog. These valves range in offering between the screw- down stop globe valve, concealed valves, inclined globe valves and ball valves. This document is an attempt to identify the valve offerings and their different applications. Globe Valves Globe valves are named for their spherical body shape with the two halves of the body being separated by a baffle (see Figure 1) consisting of a movable disc-type element and a stationary seat. Typically the body of the globe valve is spherical in shape, hence the name Globe valve. Aquatherm’s globe valves do not have a spherical body. Figure 1: Globe Valve Globe valves, due to their internal design, are used mainly for flow control. They operate fairly efficiently in a partially open position to throttle or control the flow rate of liquids. They are used to control flow rates when mixing fluids or in batching operations where fluids may need to be continuously adjusted. Globe valves can be operated manually or by an actuator. 1 Advantages: Can be fast acting; Precise Control; Can be used in high-pressure systems. Disadvantages: High head loss; Large opening for disk assembly; low coefficient of flow; Not good for clean or sterile applications; Valve stem requires many turns to open or close. Aquatherm offers globe valves in straight and inclined or “Y” globe versions. 825 W 600 N | Lindon UT, 84042 801-805-6657 aquatherm.com Figure 2: Straight Globe Valve Figure 3: Y-Pattern Globe valve, Inclined Check valve.
    [Show full text]
  • Hancock 600 Gate, Globe and Check Valves Cast Steel
    HANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves • Internal surfaces are accurately machined to provide maximum performance. • Renewable body seat rings are made from hardened stainless steel, faced with stellite. • The wedge is cast, hardened, ground, and lapped to ensure postive sealing. • Fully guided wedge, precision machined body channels, for accurate, repeatable seating alignment. • Code compliance with ASME B16.34, API 600 and API 603. Globe valves • Internal surfaces are accurately machined to provide maximum performance. • The disc is hardened, ground, and lapped to ensure positve and repeatable sealing over the valve’s full pressure/temperature range. • A precision machined backseat is standard. • Seats are designed for accurate, repeatable, seating alignment. • Corrosion inhibited graphite packing and braided graphite filament rings are standard. GENERAL APPLICATION TECHNICAL DATA • Code compliance with ASME B16.34 and BS 1873. The range of quality gate, globe and check Size range: DN 50 - 600 (NPS 2 - 24) valves are installed in a wide range of Pressure ratings: ASME Class 150 to 600 applications in the oil and gas, chemical and Body materials: Carbon steel, stainless steel Check valves petrochemical, onshore and offshore drilling/ and alloys • Flat, precision machined and lapped seating refining, and the power industries. Connections surfaces eliminate damage from high impact standards: Flanged: ASME B16.5 seating. Butt weld: ASME B16.25 • All internal surfaces are accurately machined Testing to API 598 and to provide maximum preformance.
    [Show full text]
  • Control Valve Handbook
    CONTROL VALVE HANDBOOK Fifth Edition Emerson Automation Solutions Flow Controls Marshalltown, Iowa 50158 USA Sorocaba, 18087 Brazil Cernay, 68700 France Dubai, United Arab Emirates Singapore 128461 Singapore Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Fisher is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. © 2005, 2019 Fisher Controls International LLC. All rights reserved. D101881X012/ Sept19 Preface Control valves are an increasingly vital component of modern manufacturing around the world. Properly selected and maintained control valves increase efficiency, safety, profitability, and ecology. The Control Valve Handbook has been a primary reference since its first printing in 1965. This fifth edition presents vital information on control valve performance and the latest technologies. Chapter 1 offers an introduction to control valves, including definitions for common control valve and instrumentation terminology.
    [Show full text]
  • Ball Butterfly Check Gate Globe Plug Valves Differences Applications Suitability
    ADELAIDE • BRISBANE • PERTH VALVE TYPES There are a large variety of valves and valve configurations to suit all services and conditions; different uses (on/off, control), different fluids (liquid, gas etc; combustible, toxic, corrosive etc) different materials and different pressure and temperature conditions. Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly,Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc. The following types of valves are used in a variety of applications, these descriptions may provide a basic guideline in the selection of valves. BALL VALVES BUTTERFLY VALVES Because of their excellent operating The butterfly valve derives its name from the characteristics, ball valves are used for the wing-like action of the disc which operates at broadest spectrum of isolation applications and right angles to the flow. It’s main advantage is a are available in a wide range of sizes and seating surface which is not critical. It is materials and are available in full flow and full designed for flow isolation. The disc impinges through conduit. Advantages - quick acting, against a resilient liner to provide bubble straight through flow in either direction, low tightness with low operating torque. Compact pressure drop, bubble tight shut off & operating and with a simple construction, butterfly valves torque, easily actuated. Disadvantages - facilitate easy pipe arrangement. Due to disc, temperature limitations on seating material, long they have slightly reduced flow characteristics. “relative” face to face dimension.
    [Show full text]
  • ABBREVIATIONS - PLUMBING PLUMBING SYMBOLS PLUMBING SYMBOLS PIPING DESCRIPTION Dewberry AD AREA DRAIN 25 S
    6 5 4 3 2 1 ABBREVIATIONS - PLUMBING PLUMBING SYMBOLS PLUMBING SYMBOLS PIPING DESCRIPTION Dewberry AD AREA DRAIN 25 S. Grove Avenue Suite 500 SYMBOL DESCRIPTION SYMBOL DESCRIPTION BF BALANCING FITTING BFP BACKFLOW PREVENTER VALVE Elgin, IL 60120 HARD COLD WATER (HDCW) 847.695.5840 Phone BLV GLOBE VALVE 847.695.6579 Fax CONTROL VALVE (3-WAY) WALL CLEANOUT BP BOOSTER PUMP BTV BUTTERFLY VALVE Dewberry Engineers Inc. F COLD WATER (DCW) #184005007-0002 BV BALL VALVE CONTROL VALVE (2-WAY) LINE/FLOOR CLEANOUT 401 SW WATER STREET CD CONDENSATE DRAIN SUITE 701 HOT WATER (DHW) CEB CONCRETE EQUIPMENT BASE PEORIA, IL 61602 GATE VALVE FLOOR DRAIN W/ P-TRAP CI CAST IRON CKV CHECK VALVE 309.282.8000 309.282.8001 fax HOT WATER RETURN (DHWR) CO CLEANOUT BALANCING VALVE ROOF DRAIN CP CIRCULATING PUMP VENT (V) D DRAIN LINE DCW COLD WATER GLOBE VALVE THERMOMETER (TH) DF DRINKING FOUNTAIN STORM (ST) DHW HOT WATER BALL VALVE "A" WATER HAMMER ARRESTER (LETTER DESIGNATES SIZE) DHWR HOT WATER RETURN DN DOWN SANITARY (W) DSB DOWNSPOUT BOOT A CHECK VALVE AQUASTAT DSN DOWNSPOUT NOZZEL DT DRAIN TILE BUTTERFLY VALVE SLEEVE DWH DOMESTIC WATER HEATER ES EMERGENCY SHOWER / EYEWASH ESTV EMERGENCY SHOWER TEMPERING VALVE PRESSURE REGULATING VALVE PLUG IN END OF PIPE EWC ELECTRIC WATER COOLER EXT EXPANSION TANK FBO FURNISHED BY OWNER VENTURI FLOW METER PIPE ANCHOR FCO FLOOR CLEANOUT FD FLOOR DRAIN BACKFLOW PREVENTER PIPE GUIDE FL FIRE LINE N E FS FLOOR SINK O T G NATURAL GAS I T C PIPE REDUCER EXPANSION JOINT (EJ) GI GREASE INTERCEPTOR I C HB HOSE BIBB R U HDCW HARD DOMESTIC
    [Show full text]
  • Belimo Globe Valve Technical Documentation
    Greater Force and Flexibility Globe Valves Table of Contents Globe Valve Overview . 3 Nomenclature . 5 Product Range . 6 Set-Up . 9 Close-Off Pressure . 12 Accessories . 14 Repacking and Rebuild Kits . 16 Installation Instructions . 17 Pressure and Temperature Ratings . 21 , Inc. ) USA ( Tech.Doc - 4/18 - Subject to change. © Belimo Aircontrols - 4/18 Subject to change. © Belimo Aircontrols Tech.Doc 800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA Overview Globe Valve Globe Valve The Belimo globe valve assemblies provide high close-off pressure, precise positioning, easy installation, fi eld adjustability, and reliable operation. The G2B, G2S and G3B series NPT threaded globe valves are easy to identify with the Belimo metal name plate stating the rating and certifi cation details. They feature ANSI Class VI leakage to ensure tight close-off, accurate modulation at low fl ow with rangeability rating of 100:1, and pressure compensated valve design for 2-way valve bodies to achieve specifi ed close-off with low actuator torque. G2S series with maximum 50 psi differential pressure specifi cation accommodates 100 psi inlet steam applications. The Belimo globe valve actuators are designed to withstand the rigorous demands of many HVAC applications. With its innovative quick connect coupler, the globe valve actuator can be retrofi tted and installed and adapted in no time. The Belimo globe valve actuators incorporate not only strength but are highly adaptable making selection, installation and service hassle-free. G2/G3 Valve Body Construction Notched stem and tapered bonnet eliminates the need for stem adapters and couplers Dual EPDM O-ring and gasket packing ensures no external leakage .
    [Show full text]
  • Globe Valves in Metal and Plastic the Correct Valve Selection Creates Security
    Globe valves in metal and plastic The correct valve selection creates security Within the various areas of application, valves are subject GEMÜ is your valve and instrumentation partner. to widely different requirements. Chemical and physical State-of-the-art factory equipment and machinery plus a properties of the working media have a direct influence motivated team ensure the best service. on material selection of the components. Moreover, both A world-wide network of distributors and sales mechanical and process-specific requirements have an subsidiaries guarantee that products and services reach immediate effect on the valve. To do justice to the given you quickly and directly. We are constantly making operating conditions on an individual basis, GEMÜ offers investments in order to optimise our existing products its customers a wide range of valve types as well as many and to develop new products. Thus we can provide material, connection and actuation options. Basically, the technical solutions for individual applications. manufacturer's information and the interaction between the operating pressure / temperature must be taken into account. 2 Table of contents Globe and control valves GEMÜ 538 pneumatically operated . 4 - 5 2/2-way globe valve, motorized . 25 Globe and control valves GEMÜ 539 eSyDrive motorized and manually operated . 6 -7 2/2-way globe valve, motorized . 26 Functional principle . 8 - 9 GEMÜ 342 GEMÜ 514 3/2-way globe valve, motorized . 27 2/2-way angle seat globe valve, pneumatically operated . 10 GEMÜ 344 GEMÜ 550 3/2-way globe valve, motorized . 28 2/2-way angle seat globe valve, pneumatically operated .
    [Show full text]