DOCSLIB.ORG

Rden Valve S Hose Bibb Iler Drain

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Rden Valve S Hose Bibb Iler Drain Valves & Connectors Catalog & Connectors Valves SUPPLY STOPS SUPPLY LINES GARDEN VALVE VALVES & PLUMBING VALVES ACCESSORIES SPECIALTY FITTINGS HOSE BIBB CONNECTORS GAS VALVES STOP VALVES APPLIANCE CONNECTORSBOILER DRAIN CATALOG CHECK VALVE FROTS Connect with Quality v1.1 | 02-19 | www.bkproducts.com NON-METALLIC TUBING CONNECT SERIES 7700T BRASS VALVES FROST FREE CORRUGATED WATER CONNECTORS WITH GAS VALVES BRAIDED STAINLESS STEEL SUPPLY STOP VALVE QUALITY ANGLE SUPPLY STOP BRASS FITTINGS & ACC TABLE OF CONTENTS ProLine provides customers with high-quality, pro-grade plumbing and heating products with an emphasis on value. Offering trade professionals a high performing and economical alternative, ProLine products are designed to look and perform to a trade professional’s expectations. From plumbing valves to flexible appliance connectors to specialty fittings, ProLine items are made to applicable industry standards and support a variety of rough plumbing and mechanical applications. 01 Ball Valves 02 Gas Valves 03 Plumbing Valves Series 7710 | Series 7700 | Series 7690 Gas Valves | Log Lighters Hose End Valves | Low Pressure Valves Specialty Valves | Valve Repair 04 Supply Lines & 05 Supply Stops 06 Flexible Connectors Appliance Connectors Angle Stops | Straight Stops Stainless Steel | Yellow Epoxy Coated Faucet Lines | Toilet Lines | SureDry Dual Outlet Stops | EZ-Connectors Appliance Connectors 07 Push-to-Connect 08 Dielectric Unions 09 Plumbing Tools Brass | Copper Dielectric Unions | Repair Street Keys | Sockets | Pipe Cutters 10 Brass Fittings & Accessories 11 Non-Metallic Tubing 12 Pipe Support Brass Pipe | Compression | Flare Cut Case | Boxed | Reel | Hangtag Copper | Galvanized Steel | Plastic Brass Barbed | Garden | Nylon Barbed 13 Specialty Fittings Assortment | Plastic | Rapid Fire PROLINE CATALOG | 1 Connect with Quality www.bkproducts.com 8285 Tournament Drive Memphis, TN 38125 Phone: 800-782-2385 Fax: 800-421-7724 v1.1 | 02-19 Brass Valves ..........................004 SECTION 01 • Series 7710 • Series 7700 BALL VALVES • Series 7690 ProLine Ball Valves are precisely engineered for outsanding PVC & CPVC Valves .................007 service, long life and reliable performance. These valves offer easy • Series 6700 operation, superior flow and inlclude a wide range of water/oil/ gas (WOG) valves, gas valves and water valves constructed from forged brass, CPVC and PVC materials. ProLine Valves meet UPC and ICC plumbing code requirements and are certified to meet NSF 61 with many available in lead-free compliant versions. PROLINE CATALOG | 3 BALL VALVES | BRASS Series 7710T Series 7710S Brass Ball Valve Brass Ball Valve Premium | Full Port Premium | Full Port Forged Brass | Italian Forged Brass | Italian Item No. Size Connection Inner MC Item No. Size Connection Inner MC 107-401NL 1/4” FIP x FIP - 20 107-453NL 1/2” SWT x SWT - 15 107-402NL 3/8” FIP x FIP - 20 107-454NL 3/4” SWT x SWT - 15 107-403NL 1/2” FIP x FIP - 15 107-455NL 1” SWT x SWT - 10 107-404NL 3/4” FIP x FIP - 15 107-456NL 1-1/4” SWT x SWT - 5 107-405NL 1” FIP x FIP - 10 107-457NL 1-1/2” SWT x SWT - 5 107-406NL 1-1/4” FIP x FIP - 4 107-458NL 2” SWT x SWT - 2 107-407NL 1-1/2” FIP x FIP - 4 107-408NL 2” FIP x FIP - 2 Features: • 600PSI/150 WSP • Internal & External anti-friction Features: • -20°F to 300°F temperature range stem washers • 600PSI/150 WSP • Internal & External anti-friction • Full port for maximum flow rate • Corrosion-resistant steel handle • -20°F to 300°F temperature range stem washers • Double FKM O-ring - maintenance • Made in Italy • Full port for maximum flow rate • Corrosion-resistant steel handle free blowout proof stem design • Double FKM O-ring - maintenance • Made in Italy • PTFE Discs and Seats free blowout proof stem design • PTFE Discs and Seats ® CUS ® CUS Series 7700T Brass Ball Valve Series 7710TC Premium | Full Port Brass Ball Valve Brass | Packing Gland Premium | Full Port | Nickel Plated | Forged Brass Item No. Desc. Connection Inner MC 107-821NL 1/4” FIP x FIP 15 120 Item No. Desc. Connection Inner MC 107-822NL 3/8” FIP x FIP 15 120 107-000NL 1/8” FIP x FIP 20 200 107-823NL 1/2” FIP x FIP - 20 107-001NL 1/4” FIP x FIP 20 200 107-824NL 3/4” FIP x FIP - 15 107-002NL 3/8” FIP x FIP 10 100 107-825NL 1” FIP x FIP - 10 107-003NL 1/2” FIP x FIP 10 100 107-826NL 1-1/4” FIP x FIP 4 24 107-004NL 3/4” FIP x FIP 10 100 107-827NL 1-1/2” FIP x FIP 2 24 107-005NL 1” FIP x FIP 10 50 107-828NL 2” FIP x FIP 2 12 107-006NL 1-1/4” FIP x FIP 10 20 107-829NL 2-1/2” FIP x FIP 2 6 107-007NL 1-1/2” FIP x FIP 4 20 107-830NL 3” FIP x FIP 2 4 107-008NL 2” FIP x FIP 2 10 107-831NL 4” FIP x FIP - 2 Features: Features: • 600PSI/150 WSP • Internal & External anti-friction • 600PSI/150 WSP (1/2”-2”) • Packing Gland - blowout-proof • -20°F to 300°F temperature range stem washers • 400PSI Non-Shock WOG stem design • Full port for maximum flow rate • Corrosion-resistant steel handle (2-1/2” - 4”) • PTFE seat & packing • Double FKM O-ring - maintenance • Corrosion-resistant Nickel-plated • -20°F to 300°F temperature range • Rust-resistant heavy-duty handle free blowout proof stem design body • Full port for maximum flow rate with vinyl grip • PTFE Discs and Seats ® ® CUS C NSF/ANSI 61 NSF/ANSI 372 CUS 4 | BALL VALVES Series 7700S Series 7700TT Brass Ball Valve Brass Ball Valve Premium | Full Port Full Port | Forged Brass Brass | Packing Gland Packing Gland | ‘T’ Handle Item No. Desc. Connection Inner MC Item No. Desc. Connection Inner MC 107-843NL 1/2” SWT x SWT - 25 107-824TNL 3/4” FIP x FIP 10 60 107-844NL 3/4” SWT x SWT - 15 107-825TNL 1” FIP x FIP 8 48 107-845NL 1” SWT x SWT - 10 107-846NL 1-1/4” SWT x SWT 4 24 Features: 107-847NL 1-1/2” SWT x SWT 2 24 107-848NL 2” SWT x SWT 2 12 • 600PSI/150 WSP • PTFE seat & packing 107-849NL 2-1/2” SWT x SWT 2 6 • -20°F to 300°F temperature range • Chrome-plated brass ball & stem 107-850NL 3” SWT x SWT 2 4 • Full port for maximum flow rate • Rust-proof 304 S.S. T-handle with vinyl grip 107-851NL 4” SWT x SWT - 2 • Packing Gland - blowout proof stem design Features: ® • 600PSI/150 WSP (1/2”-2”) • Packing Gland - blowout proof CUS C • 400PSI Non-Shock WOG stem design NSF/ANSI 61 NSF/ANSI 372 (2-1/2” - 4”) • PTFE seat & packing • -20°F to 300°F temperature range • Rust-resistant heavy-duty handle • Full port for maximum flow rate with vinyl grip Series 7690T ® Brass Ball Valve CUS C NSF/ANSI 61 NSF/ANSI 372 Premium | Full Port Forged Brass | Packing Gland Series 7700LH Brass Ball Valve Item No. Size Connection Inner MC Full Port | Forged Brass 107-811NL 1/4” FIP x FIP 10 120 Packing Gland | Locking Handle 107-812NL 3/8” FIP x FIP 10 120 107-813NL 1/2” FIP x FIP 10 120 107-814NL 3/4” FIP x FIP 10 60 107-815NL 1” FIP x FIP 6 24 107-816NL 1-1/4” FIP x FIP 4 24 Item No. Desc. Connection Inner MC 107-817NL 1-1/2” FIP x FIP 2 16 107-823LNL 1/2” FIP x FIP 15 120 107-818NL 2” FIP x FIP 2 12 107-824LNL 3/4” FIP x FIP 10 60 107-825LNL 1” FIP x FIP 8 48 Features: • 600PSI/125 WSP (1/2” - 2”) • PTFE Discs and Seats Features: • -40°F to 194°F temperature range • Chrome-plated brass ball & stem • 600PSI/150 WSP (1/2”-1”) • Chrome-plated brass ball & stem • Full port for maximum flow rate • Rust-resistant heavy-duty handle • -20°F to 300°F temperature range • Rust-proof 304 S.S. handle with • Packing Gland - blowout proof with vinyl grip • Full port for maximum flow rate vinyl grip stem design • Packing Gland - blowout proof • Handle has simple locking stem design mechanism for lfow control • PTFE seat & packing ® CUS C NSF/ANSI 61 NSF/ANSI 372 ® CUS C NSF/ANSI 61 NSF/ANSI 372 PROLINE CATALOG | 5 BALL VALVES | BRASS Series 7690S Series 7690PX Brass Ball Valve Brass Ball Valve Premium | Full Port Full Port | Brass Forged Brass | Packing Gland Packing Gland • PEX Connections are F1807 Item No. Size Connection Inner MC Item No. Size Connection Inner MC 107-853NL 1/2” SWT x SWT 10 120 107-342NL 3/8” PEX x PEX 10 120 107-854NL 3/4” SWT x SWT 10 60 107-343NL 1/2” PEX x PEX 10 120 107-855NL 1” SWT x SWT 6 24 107-344NL 3/4” PEX x PEX 10 80 107-856NL 1-1/4” SWT x SWT 4 24 107-345NL 1” PEX x PEX 6 48 107-857NL 1-1/2” SWT x SWT 2 16 107-334NL 3/4” PEX x MIP 10 80 107-858NL 2” SWT x SWT 2 12 Features: Features: • 400 PSI WOG • Rust-resistant heavy-duty handle • 600PSI/125 WSP (1/2” - 2”) • PTFE Discs and Seats • 160 PSI @ 73°F (refer to PEX with vinyl grip • -40°F to 194°F temperature range • Chrome-plated brass ball & stem piping manufacturers guidelines) • Intended for use in PEX piping systems • Full port for maximum flow rate • Rust-resistant heavy-duty handle • Full port for maximum flow rate • Ideal for use in potable water & with vinyl grip • Packing Gland - blowout proof • Packing Gland - blowout proof radiant heating applications stem design stem design • Fast & easy crimp installation into • PTFE Discs and Seats PEX piping systems • Chrome-plated brass ball & stem C NSF/ANSI 61 NSF/ANSI 372 Series 7690PF Brass Ball Valve Full Port | Forged Brass Series 7690MPXE Premium | Packing Gland Brass Ball Valve Push Fit Full Port | Brass PEX F1960 Connection MIP x Barbed Item No.
Load more

Recommended publications
  • Products & Services
    PRODUCTS & SERVICES Gate • Globe • Check • Ball www.coopervalves.com | [email protected] Table of Contents Company Information ........................................................................................................ 3 Our Cooper Valves™ ........................................................................................................... 4 About Our COOPER® Products ........................................................................................... 5 Applications ........................................................................................................................ 5 COOPER® Features ............................................................................................................ 5 Our Services ....................................................................................................................... 6 Why Consider COOPER® Valves? ......................................................................................... 7 Certifications ...................................................................................................................... 7 COOPER® Valves Engineering ............................................................................................. 8 Material List ....................................................................................................................... 9 Gate Valves ....................................................................................................................... 10 Gate Valve Expanded View
    [Show full text]
  • NEWCO Cast Steel Valves
    NEWCO Cast Steel Valves NEWCO Cast Steel Valves Gates Sizes: 2” to 54” (50 mm to 1350 mm) Cameron’s NEWCO® cast steel gate, Classes: 150 to 1500 globe and check valves exceed all industry design requirements. These NEWCO cast steel gate valves are ideal for bi-directional flow and tight shutoff. Due to the valves range from 2” to 54” (50 mm flow characteristics of the wedge-to-seat design, to 1350 mm) in pressure classes 150 gate valves should be operated in the full-open to 1500. or full-closed position. Concentrated flow across the seats of a partially opened gate valve risks possible seat damage, therefore throttling is not recommended. Gate valves are utilized in applications where minimum pressure drop is desired. Globes Sizes: 2” to 24” (50 mm to 600 mm) Classes: 150 to 1500 NEWCO cast steel globe valves are ideal for unidirectional, controlled flow. The flow characteristics of a globe valve are repeatable, consistent and easy to control at various open positions, which makes the design ideal for general flow regulation. Note: If line pressure drops below 20%, cavitation, vibration and noise may occur, resulting in hardware damage. If these conditions are likely, consult your Cameron representative for recommendations. Angle Globes Sizes: 2” to 12” (50 mm to 300 mm) Classes: 150 to 600 NEWCO cast steel angle globe valves are ideal for unidirectional, controlled flow. The flow characteristics of an angle globe valve are repeatable, consistent and easy to control at various positions, which makes the design ideal for general flow regulation. Note: If line pressure drops below 20%, cavitation, vibration and noise may occur, resulting in hardware damage.
    [Show full text]
  • New Developments in Pneumatic Valve Technology for Packaging Applications
    TechnicalPaper New developments in pneumatic valve technology for packaging applications Pneumatics is widely used in many packaging machines to drive motion and actuate machine sequences. It is a clean, reliable, compact and lightweight technology that provides a cost-effective solution to help packaging machine designers create innovative systems while staying competitive. Advances in pneumatic valves enable packaging machines like this Manifold valve technology plays a central role in the performance and cartoner to use pneumatics more efficiently and help machine builders effectiveness of pneumatic systems. Recent developments in this create innovative folding configurations to satisfy market needs. technology have increased their flexibility, their modularity and their ability to integrate with and be controlled by the advanced communication bus architectures that are preferred by leading Several factors continue to make pneumatics broadly appealing to packaging machine OEMs and end users, enhancing the application machine builders in the packaging industry. One is cost of ownership: value pneumatic technology supplies. Not only are most pneumatic components relatively low-cost to begin Pneumatics-driven packaging applications Pneumatics can be particularly effective for any kind of machine motion that combines or includes high-speed, point-to-point movement AVENTICS AV valve system – of the types of products with the weight and size dimensions typically found in packaging machines. This includes indexing, sorting and advantages at
    [Show full text]
  • Poppet Valve
    POPPET VALVE A poppet valve is a valve consisting of a hole, usually round or oval, and a tapered plug, usually a disk shape on the end of a shaft also called a valve stem. The shaft guides the plug portion by sliding through a valve guide. In most applications a pressure differential helps to seal the valve and in some applications also open it. Other types Presta and Schrader valves used on tires are examples of poppet valves. The Presta valve has no spring and relies on a pressure differential for opening and closing while being inflated. Uses Poppet valves are used in most piston engines to open and close the intake and exhaust ports. Poppet valves are also used in many industrial process from controlling the flow of rocket fuel to controlling the flow of milk[[1]]. The poppet valve was also used in a limited fashion in steam engines, particularly steam locomotives. Most steam locomotives used slide valves or piston valves, but these designs, although mechanically simpler and very rugged, were significantly less efficient than the poppet valve. A number of designs of locomotive poppet valve system were tried, the most popular being the Italian Caprotti valve gear[[2]], the British Caprotti valve gear[[3]] (an improvement of the Italian one), the German Lentz rotary-cam valve gear, and two American versions by Franklin, their oscillating-cam valve gear and rotary-cam valve gear. They were used with some success, but they were less ruggedly reliable than traditional valve gear and did not see widespread adoption. In internal combustion engine poppet valve The valve is usually a flat disk of metal with a long rod known as the valve stem out one end.
    [Show full text]
  • Low Pressure High Torque Quasi Turbine Rotary Air Engine
    ISSN: 2319-8753 International Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297: 2007 Certified Organization) Vol. 3, Issue 8, August 2014 Low Pressure High Torque Quasi Turbine Rotary Air Engine K.M. Jagadale 1, Prof V. R. Gambhire2 P.G. Student, Department of Mechanical Engineering, Tatyasaheb Kore Institute of Engineering and Technology, Warananagar, Maharashtra, India1 Associate Professor, Department of Mechanical Engineering, Tatyasaheb Kore Institute of Engineering and Technology, Warananagar, Maharashtra, India 2 ABSTRACT: This paper discusses concept of Quasi turbine (QT) engines and its application in industrial systems and new technologies which are improving their performance. The primary advantages of air engine use come from applications where current technologies are either not appropriate or cannot be scaled down in size, rather there are not such type of systems developed yet. One of the most important things is waste energy recovery in industrial field. As the natural resources are going to exhaust, energy recovery has great importance. This paper represents a quasi turbine rotary air engine having low rpm and works on low pressure and recovers waste energy may be in the form of any gas or steam. The quasi turbine machine is a pressure driven, continuous torque and having symmetrically deformable rotor. This report also focuses on its applications in industrial systems, its multi fuel mode. In this paper different alternative methods discussed to recover waste energy. The quasi turbine rotary air engine is designed and developed through this project work. KEYWORDS: Quasi turbine (QT), Positive displacement rotor, piston less Rotary Machine. I. INTRODUCTION A heat engine is required to convert the recovered heat energy into mechanical energy.
    [Show full text]
  • Air-Cooled Cylinders 2
    Air-Cooled Aircraft Engine Cylinders An Evolutionary Odyssey by George Genevro Part 2 - Developments in the U.S. The Lawrance-Wright Era. In the U.S., almost the only proponent of the air-cooled engine during World War I was the Lawrance Aero Engine Company. This small New York City firm had produced the crude opposed twins that powered the Penguin trainers, which were supposed to be the stepping-stone to the Jenny for aspiring military pilots. The Penguins were not intended to fly but apparently could taxi at a speed that would provide some excitement for trainees as they tried to maintain directional control and develop some feel of what flight controls were all about. The Lawrance twins, which can be seen in many museums, had directly opposed air- cooled cylinders and a crankshaft with a single crankpin to which both connecting rods were attached. This arrangement resulted in an engine that shook violently at all speeds and was therefore essentially useless for normal powered flight. After World War I, some attempts were made, generally unsuccessful, to convert the Lawrance twins into usable engines for light aircraft by fitting a two-throw crankshaft and welding an offset section into the connecting rods. This proves that the desire to fly can be very strong indeed in some individuals. The hairpin valve springs pictured to the left were possibly pioneered by Salmson in 1911, and later used not only on British single-cylinder racing motorcycle engines, but also by Ferrari and others into the 1950s. This use was a response to the same problem that led to desmodromic valves at Ducati, Norton (test only) and Mercedes - namely the fatigue of coil springs from "ringing".
    [Show full text]
  • Control Valve Sizing Theory, Cavitation, Flashing Noise, Flashing and Cavitation Valve Pressure Recovery Factor
    Control Valve Sizing Theory, Cavitation, Flashing Noise, Flashing and Cavitation Valve Pressure Recovery Factor When a fluid passes through the valve orifice there is a marked increase in velocity. Velocity reaches a maximum and pressure a minimum at the smallest sectional flow area just downstream of the orifice opening. This point of maximum velocity is called the Vena Contracta. Downstream of the Vena Contracta the fluid velocity decelerates and the pressure increases of recovers. The more stream lined valve body designs like butterfly and ball valves exhibit a high degree of pressure recovery where as Globe style valves exhibit a lower degree of pressure recovery because of the Globe geometry the velocity is lower through the vena Contracta. The Valve Pressure Recovery Factor is used to quantify this maximum velocity at the vena Contracta and is derived by testing and published by control valve manufacturers. The Higher the Valve Pressure Recovery Factor number the lower the downstream recovery, so globe style valves have high recovery factors. ISA uses FL to represent the Valve Recovery Factor is valve sizing equations. Flow Through a restriction • As fluid flows through a restriction, the Restriction Vena Contracta fluid’s velocity increases. Flow • The Bernoulli Principle P1 P2 states that as the velocity of a fluid or gas increases, its pressure decreases. Velocity Profile • The Vena Contracta is the point of smallest flow area, highest velocity, and Pressure Profile lowest pressure. Terminology Vapor Pressure Pv The vapor pressure of a fluid is the pressure at which the fluid is in thermodynamic equilibrium with its condensed state.
    [Show full text]
  • Preparation of Papers in Two-Column Format
    International Conference on Ideas, Impact and Innovation in Mechanical Engineering (ICIIIME 2017) ISSN: 2321-8169 Volume: 5 Issue: 6 1336 – 1341 __________________________________________________________________________________________ A Review on Application of the Quasiturbine Engine as a Replacement for the Standard Piston Engine Akash Ampat, Siddhant Gaidhani2,Sachin Yevale3, Prashant Kharche4 1Student,Department of Mechanical Engineering, Smt. Kashibai Navale College of Engineering, Pune;[email protected], 2Student,Department of Mechanical Engineering, Smt. Kashibai Navale College of Engineering, Pune; [email protected] ABSTRACT This paper reviews the concept of a Quasiturbine (also known as Qurbine) Engine and its potential as a replacement for the standard Piston Engine. The Quasiturbine Rotary Air Engine is a low rpm engine, working on low pressure. For this purpose, a binary system of Quasiturbines is also used. It also discusses the multi-fuel capability of Quasiturbine and how it can be used in vehicle propulsion systems. This piston-less rotary machine is intended to be used where the existing technologies are centuries old and have numerous insurmountable problems. It has been consistently observed that this engine provides a better efficiency, much smaller ratio of unit displacement to engine volume, extremely high power per cycle and reduced emissions. Key words: Quasiturbine, standard piston engine, piston-less rotary engine, deformable rotor. I. INTRODUCTION A. Need and Invention Dr. Gilles Saint-Hilaire, a thermonuclear physicist, after thoroughly studying the limitations of conventional engines, designed the Quasiturbine Engine. The Quasiturbine is a continuous Torque, symmetrically deformable spinning wheel. The Saint-Hilaire family used a modern computer based approach to map the conventional engine characteristics with optimum physical-chemical graphs.
    [Show full text]
  • Valves for Oil & Gas Industries
    Valves for Oil & Gas Industries Engineered Solutions for Isolation and Control Severe Operating Conditions. Critical Safety Operations. Dependability in Remote Locations. All these factors are key concerns for oil & gas equipment used in upstream, midstream and downstream processes. MOGAS metal- seated isolation and rotary control valves are built for punishing conditions. We understand the crucial need for absolute shutoff and reliable pressure and flow control. Our ongoing application- specific research and development—coupled with in-the-field customer assistance, valve analysis and maintenance / repair service—provides a high level of confidence and support. Advanced production techniques and pipeline processes are creating a demand for not only a new way of operating, but new types of equipment and valves. Production and pipeline components are expected to last longer in order to maximize return on investments—and recognize the true total cost of ownership. This is where MOGAS products excel by outlasting traditional “throw-away” valves, performing reliably in extreme conditions, and being supported with field services you can count on. Oil & Gas Industry Overview Solutions for Challenging Environments FlexStream Innovation MOGAS metal-seated ball valves have proven successful in these applications and more: Cavern Fill and Withdrawal Compressor Anti-Surge Dryer Sequence (Mol-Sieve) Bi-directional Flow Control Emergency Shut Down (ESD) First Stage Separation Gas Metering / Gathering Control High Integrity Pressure Protection Systems (HIPPS) Gas Flow Control High Pressure Gas Injection LNG Feed Gas Main Gas Storage Flow Control Plant Depressurization Control Systems Designed In-House Positive Isolation Tandem Severe Pressure Reduction Control …while handling these conditions and more: Reduced Footprint High pressure drops Multi-phase crude Erosion Sour gas Fugitive emissions Hydrate formations High velocity Noise limitations Liquefied gas Vibration Valves for Oil & Gas Industries © Copyright 07/2014 MOGAS Industries, Inc.
    [Show full text]
  • STANDARD SYMBOLS for PLUMBING, PIPING, and VALVES Plumbing Plumbing (Continued) Pipe Fittings (Continued)
    STANDARD SYMBOLS FOR PLUMBING, PIPING, AND VALVES Plumbing Plumbing (continued) Pipe Fittings (continued) Corner Bathtub................................. Drinking Fountain (Projecting-Type).. Fitting Screwed Soldered Recessed Bathtub............................ Elbow–Long Radius................ L Hot Water Tank................................ HW R T Sitz Bath............................................. Side Outlet Elbow– Water Heater................................... WH Outlet Down......................... Bidet................................................... Meter............................................... Side Outlet Elbow– M Shower Stall....................................... Outlet Up.............................. Hose Rack...................................... Shower Head.................................... HR Base Elbow ............................ .(Plan) (Elev.) Hose Bibb....................................... Double Branch Elbow ............ Overhead Gang Shower...................(P. lan) HB Gas Outlet...................................... (Elev.) Single Sweep Tee................... G Pedestal Lavatory............................... Vacuum Outlet................................ Double Sweep Tee.................. 2 2 Wall Lavatory...................................... Drain............................................... Reducing Elbow...................... 4 4 D Corner Lavatory.................................. Grease Separator........................... Tee.......................................... G Oil Separator.................................
    [Show full text]
  • PLUMBING DICTIONARY Sixth Edition
    as to produce smooth threads. 2. An oil or oily preparation used as a cutting fluid espe cially a water-soluble oil (such as a mineral oil containing- a fatty oil) Cut Grooving (cut groov-ing) the process of machining away material, providing a groove into a pipe to allow for a mechani cal coupling to be installed.This process was invented by Victau - lic Corp. in 1925. Cut Grooving is designed for stanard weight- ceives or heavier wall thickness pipe. tetrafluoroethylene (tet-ra-- theseveral lower variouslyterminal, whichshaped re or decalescensecryolite (de-ca-les-cen- ming and flood consisting(cry-o-lite) of sodium-alumi earthfluo-ro-eth-yl-ene) by alternately dam a colorless, thegrooved vapors tools. from 4. anonpressure tool used by se) a decrease in temperaturea mineral nonflammable gas used in mak- metalworkers to shape material thatnum occurs fluoride. while Usedheating for soldermet- ing a stream. See STANK. or the pressure sterilizers, and - spannering heat resistantwrench and(span-ner acid re - conductsto a desired the form vapors. 5. a tooldirectly used al ingthrough copper a rangeand inalloys which when a mixed with phosphoric acid.- wrench)sistant plastics 1. one ofsuch various as teflon. tools to setthe theouter teeth air. of Sometimesaatmosphere circular or exhaust vent. See change in a structure occurs. Also used for soldering alumi forAbbr. tightening, T.F.E. or loosening,chiefly Brit.: orcalled band vapor, saw. steam,6. a tool used to degree of hazard (de-gree stench trap (stench trap) num bronze when mixed with nutsthermal and bolts.expansion 2. (water) straightenLOCAL VENT.
    [Show full text]
  • Forged Steel Valves
    Edward Forged Steel Valves Experience In Motion Table of Contents Figure Number Index 5 Univalve® Stop-Check Valves Class 4500 55 Edward Valves Availability Chart 6 Univalve® Piston Check Valves Class 4500 56 Edward Description of Figure Number System 8 Hydraulic Stop Valves 57 Hydraulic Check Valves 58 Introduction Features and Descriptions of Edward PressurCombo Valves 59 PressurCombo Class 1690 60 High Performance for Critical Service 10 PressurCombo Class 2680 61 A History of Firsts 13 PressurCombo Class 4500 62 Miscellaneous Technical Data 14 Strainers Class 800 and Series 1500 63 Special Application Valves 15 Features and Descriptions of Features and Description of Edward Hermavalve® Hermetically-Sealed Valves 64 Edward Univalve® Globe Valves 16 Part Specification List For Edward Hermavalve® 66 Part Specification List for Edward Univalve® 17 Hermavalve® Hermetically-Sealed Valves 67 Edward Forged Steel Valves Feature Body-Guided Disks 18 Here’s How the Unique Stem-Disk Assembly is Made... 19 Features and Description of Accessories/Actuators Edward Bolted Bonnet Globe Valves 20 Accessories – Forged Steel 68 Part Specification List for Actuators – Forged Steel 69 Edward Bolted Bonnet Globe Valves 21 Required Information for Motor Actuators 70 Forged Steel Valves Reference Blow-Off Valves Class 300 22 Material Chemical Analysis (ASTM) for Edward Valves 72 Blow-Off Valves Class 400 & 600 24 ASME B16.34 – 2009 Pressure/Temperature Ratings 73 Blow-Off Valves Class 1500 & 2500 26 Continuous Blowdown Valves Class 1925 27 Technical Information
    [Show full text]