Knowledge Clusters:TheFirstStage(Active) Knowledge Clusters:TheFirstStage(Active)
Cluster Headquarters Participating Research Organizations(Bold: Core Research Organization) ○President……………Toshio Kinjo (Professor Emeritus, Gifu University)Industry…SHINKO OPTICAL Co., Ltd., Suntec Corp., CMC Technology Development Co., Ltd., Tokai Medical Products Inc., Kyoto Kagaku Co., Ltd., SHIMADZU Corp., ASKA Corp., Life Sciences IT EnvironmentNanotech/Materials ………………Toshio Kuroki (President, Gifu University) Gifu/Ogaki Robotics Advanced Medical Cluster ○Advisor Sumiiryou Co., Ltd., Sakamoto Model Corp., Crown Development Co., Ltd., Medical ai, Ltd., ○Project Director………Satoshi Nishimura iXs Research Corp., SEGA Corp., Electric Sheep Co., Ltd., Mould Planning HANADA, EBM Co., Ltd., Nikkou FA Co., Ltd., TAK Co., Ltd., ALOKA Co., Ltd., ○Chief Scientist………Hirofumi Takemura (Professor, Gifu University) KONICA MINOLTA MEDICAL & GRAPHIC, Inc., SANYO Electric Co., Ltd., Masakatsu Fujie (Professor, Waseda University) Media Drive Corp., InfoFarm Co., Ltd., Densan System (DSK) Co., Ltd., ○Deputy Chief Scientist… Concentration Heat and Momentum Ltd., TALKENG Co. Ltd., Ishikawa Seisakusho, Ltd., Yasutomi Kinosada (Professor, Gifu University) Parama-Tech Co., Ltd., RIKEN-SANGYO Co., Ltd., ESP Planning Co., Ltd., Akihiko Takiguchi, Shuji Yanase, Kouji Sanaka Activelink Co., Ltd., MIZUNO TECHNICS Corp., Asahi Roentgen Ind. Co., Ltd., Think Free Co., Ltd., IWATA MFG. Co., Ltd., Ecchandes Inc., Kitani Co., Ltd., Gifu/Ogaki ○Science and Technology… Coordinators Encephalon Co., Ltd. Academia…Gifu University, Waseda University, Nagoya Institute of Technology, Ritsumeikan University, Asahi University, Shiga University of Medical Science, Gifu National College of Technology Providing the best medical diagnosis, care, and Core Organization Government…Gifu Prefectural Research Institute of Information Technology, Gifu Prefectural Research Institute for Human Life Technology education using robots and IT Gifu Research and Development Foundation
Cluster Vision In Japan of the 21st century, patients seek safe, highly accurate, and quality medical treatment. In addition, Main Results
Project Overview We will assemble various local organizations and enterprises with superior research potential in the fields of robotics, virtual reality (VR) and IT. Through active collaboration between local organizations and located
PROMOTION OF COLLABORATION IN MEDICINE AND ENGINEERING We have been actively promoting collaboration in medicine and engineering. Specifically, we host meetings of the Medicine-Engineering Collaboration Council, where researchers who specialize in clinical evaluation and engineers who research and develop new systems using robotics and IT can exchange opinions and share information with one another. In addition, the “Cluster Plaza,” Patient simulator with Robot with CMC tactile sensor located within the Gifu University Department of Medicine, serves as a base for projected internal structures Surgical robot system for endoscopic procedures such collaboration in medical care and engineering. with heartbeat compensation
PROJECT DEVELOPMENT We have established the “Life Care Business Study Group” in order to create a business hub for medical and welfare equipment enterprises in the Gifu/Ogaki Develop minimally invasive surgery(MIS) and microsurgery support systems plus medical education/training systems Image contents region. The members of this group gather and share information in addition to Blood vessel model for for medical education researching issues common to both the medical profession and welfare-related anastomosis training business. We have also been presenting the major achievements of this group Intelligent information Intelligent sensing processing technology technology at exhibitions held both inside and outside Japan. Image processing/ Develop medical care diagnostic technology Surgery robot support systems Deveop medical diagnosis technology support systems Project Developmnt Medical education expertise VR simulation technology
Project Director New Industries Based on Medicine, Health, and Welfare Satoshi Nishimura The purpose of this project is to research novel medical technologies characterized by their use of robotics, Arteriosclerosis exam system Highly efficient electronic information processing, and other engineering technologies and to develop advanced medical devices including medical records system Oral rehabilitation surgery robots, diagnostic imaging equipment, medical information systems, medical education systems, and robot medical sensors. With the biotechnologies fostered through this project serving as the technical base, however, we ultimately expect this project to invigorate the Gifu area with novel industries centering on medicine, health, Cooperation between industry, academia, and government sectorsPedal-powered device and welfare. While growth is expected for industrial fields, a technological base with high potential is required in for lower-body support Integration of medicine order for novel industries to be victorious in the severe global competition of the future,. We therefore request and engineering R&D of the highest quality—quality of world-class caliber—from personnel at our universities and research Computer-aided diagnosis institutions. Finally, the cooperation of personnel at private companies holds the key to the success of our projects. Over the long term, until our new enterprises are on track and our new industries are up and running, Satoshi Nishimura is a former R&D Lab Directing Manager of the industry, academia, and government must remain strongly linked by a shared concept and thereby “align their Creation of medical, health, and welfare Multimedia Company at SANYO vectors.” As Project Director, an important part of my work is the focusing and directing of these vectors. enterprize zones Electric Co., Ltd.
24 25