Fabric Care Instructions
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Care Label Recommendations
CARE LABEL RECOMMENDATIONS RECOMMENDED CARE FOR APPAREL PRODUCTS Fiber content, fabric construction, color, product construction, finish applications and end use are all considered when determining recommended care. Following are recommended care instructions for Nordstrom Products, however; the product must be tested to confirm that the care label is suitable. GARMENT/ CONSTRUCTION/ FIBER CONTENT FABRICATION CARE LABEL Care ABREVIATION EMBELLISHMENTS Knits and Sweaters Acetate/Acetate Blends Knits / Sweaters K & S Dry Clean Only DCO Acrylic Sweater K & S Machine Wash Cold, Gentle Cycle With Like Colors Only Non-Chlorine Bleach If Needed MWC GC WLC ONCBIN TDL RP CIIN Tumble Dry Low, Remove Promptly Cool Iron If Needed Acrylic Gentle Or Open Construction, Chenille K & S Turn Garment Inside Out Or Loosely Knit Machine Wash Cold, Gentle Cycle With Like Colors TGIO MWC GC WLC ONCBIN R LFTD CIIN Only Non-Chlorine Bleach If Needed Reshape, Lay Flat To Dry Cool Iron If Needed Acrylic / Rayon Blends Sweaters / Gentle Or Open K & S Professionally Dry Clean Construction, Chenille Or Loosely Knit Short Cycle, No Steam PDC SC NS Acrylic / Wool Blends Sweaters with Embelishments K & S Hand Wash Cold, Separately Only Non-Chlorine Bleach If Needed, No Wring Or Twist Reshape, Lay Flat To Dry Cool Iron If Needed HWC S ONCBIN NWOT R LFTD CIIN DNID Do Not Iron Decoration Acrylic / Wool Blends Sweaters K & S Hand Wash Cold, Separately Only Non-Chlorine Bleach If Needed Roll In Towel To Remove Excess Moisture Reshape, Lay Flat To Dry HWC S ONCBIN RITTREM -
A Comparison of the ICI Pillbox and The
Deakin Research Online This is the published version: McGregor, Bruce A. 2006, A comparison of the ICI Pillbox and the Random Tumble Methods is assessing pilling and appearance change of worsted spun cashmere and cashmere- wool blend knitwear, International journal of sheep and wool science, vol. 54, no. 3, pp. 66- 73. Available from Deakin Research Online: http://hdl.handle.net/10536/DRO/DU:30024577 Reproduced with the kind permissions of the copyright owner. Copyright : 2006, University of New England International Journal of Sheep and Wool Science Volume 54, Issue 3 2006 Article 5 A Comparison Of The ICI Pillbox And The Random Tumble Methods Is Assessing Pilling And Appearance Change Of Worsted Spun Cashmere And Cashmere-Wool Blend Knitwear Bruce A. McGregor∗ ∗Primary Industries Research Victoria, [email protected] Copyright c 2006 International Journal of Sheep and Wool Science. All rights reserved. A Comparison Of The ICI Pillbox And The Random Tumble Methods Is Assessing Pilling And Appearance Change Of Worsted Spun Cashmere And Cashmere-Wool Blend Knitwear∗ Bruce A. McGregor Abstract This study evaluated the differences between two international test methods on the assessment of pilling and appearance change of worsted spun cashmere and superfine wool knitwear and their blends. Differences between the standard ICI Pill Box Method and the Random Tumble Method were found in both the significance and magnitude of resistance to pilling and appearance change and the amount of fabric mass loss of worsted spun cashmere and cashmere superfine wool blend knit fabrics. The ICI Pill Box Method differentiated to a greater extent the effects of wool type and blend ratio of cashmere and wool compared with the Random Tumble Method. -
“Al-Tally” Ascension Journey from an Egyptian Folk Art to International Fashion Trend
مجمة العمارة والفنون العدد العاشر “Al-tally” ascension journey from an Egyptian folk art to international fashion trend Dr. Noha Fawzy Abdel Wahab Lecturer at fashion department -The Higher Institute of Applied Arts Introduction: Tally is a netting fabric embroidered with metal. The embroidery is done by threading wide needles with flat strips of metal about 1/8” wide. The metal may be nickel silver, copper or brass. The netting is made of cotton or linen. The fabric is also called tulle-bi-telli. The patterns formed by this metal embroidery include geometric figures as well as plants, birds, people and camels. Tally has been made in the Asyut region of Upper Egypt since the late 19th century, although the concept of metal embroidery dates to ancient Egypt, as well as other areas of the Middle East, Asia, India and Europe. A very sheer fabric is shown in Ancient Egyptian tomb paintings. The fabric was first imported to the U.S. for the 1893 Chicago. The geometric motifs were well suited to the Art Deco style of the time. Tally is generally black, white or ecru. It is found most often in the form of a shawl, but also seen in small squares, large pieces used as bed canopies and even traditional Egyptian dresses. Tally shawls were made into garments by purchasers, particularly during the 1920s. ملخص البحث: التمي ىو نوع من انواع االتطريز عمى اقمشة منسوجة ويتم ىذا النوع من التطريز عن طريق لضم ابر عريضة بخيوط معدنية مسطحة بسمك 1/8" تصنع ىذه الخيوط من النيكل او الفضة او النحاس.واﻻقمشة المستخدمة في صناعة التمي تكون مصنوعة اما من القطن او الكتان. -
Textile Printing
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 • Telephone (919) 678-2220 ISP 1004 TEXTILE PRINTING This report is sponsored by the Importer Support Program and written to address the technical needs of product sourcers. © 2003 Cotton Incorporated. All rights reserved; America’s Cotton Producers and Importers. INTRODUCTION The desire of adding color and design to textile materials is almost as old as mankind. Early civilizations used color and design to distinguish themselves and to set themselves apart from others. Textile printing is the most important and versatile of the techniques used to add design, color, and specialty to textile fabrics. It can be thought of as the coloring technique that combines art, engineering, and dyeing technology to produce textile product images that had previously only existed in the imagination of the textile designer. Textile printing can realistically be considered localized dyeing. In ancient times, man sought these designs and images mainly for clothing or apparel, but in today’s marketplace, textile printing is important for upholstery, domestics (sheets, towels, draperies), floor coverings, and numerous other uses. The exact origin of textile printing is difficult to determine. However, a number of early civilizations developed various techniques for imparting color and design to textile garments. Batik is a modern art form for developing unique dyed patterns on textile fabrics very similar to textile printing. Batik is characterized by unique patterns and color combinations as well as the appearance of fracture lines due to the cracking of the wax during the dyeing process. Batik is derived from the Japanese term, “Ambatik,” which means “dabbing,” “writing,” or “drawing.” In Egypt, records from 23-79 AD describe a hot wax technique similar to batik. -
Ohio Hardwood Furniture Fabric Grade Sheet Comfort Design Furniture
Ohio Hardwood Furniture Fabric Grade Sheet Comfort Design Furniture COMFORT DESIGN GRADE SHEET S-STATIONARY FALL 2016 M-MOTION ALPHABETICAL P-PILLOW CLEAN RESTR CTRY ST NEW FABRIC DESCRIPTION CONTENT % GRD * GRP CODE CODE CATEGORY ORG FDM PILL C ABBY CHARCOAL Cotton 100 BB 300 S RESTR S,P USA C+ RST to M styles C ABBY RAIN Cotton 100 BB 300 S RESTR S,P USA RST to M styles ACCRINGTON DAISY Polyester 100 T 200 S RESTR S,P PAK B- PILL RST to M styles AKANA LEMONGRASS Polyester 42 FF 300 S RESTR S,P TUR C+ PILL RST to CHAIRS, OTTOMANS, PILLOWS Cotton 58 ALLSPICE MIST Polyester 23 FF 300 WS ALL S,M,P USA N Polyurethane 77 AMADEUS PHEASANT Polyester 100 PP 500 WS ALL S,M,P CHI C+ PILL RST to CHAIRS, OTTOMANS, PILLOWS on M styles 0 C NEW ANGIA ADMIRAL Polyester 100 BBB 600 S RESTR S,P CHI N PILL RST to CHAIRS, OTTOMANS, PILLOWS C NEW ANGIA LINEN Polyester 100 BBB 600 S RESTR S,P CHI N PILL RST to CHAIRS, OTTOMANS, PILLOWS C ANTIQUITY CHARCOAL Cotton 100 V 200 S RESTR S,P USA C ANTIQUITY CLOUD Cotton 100 V 200 S RESTR S,P USA C ANTIQUITY CREAM Cotton 100 V 200 S RESTR S,P USA C ANTIQUITY GREYSTONE Cotton 100 V 200 S RESTR S,P USA C ANTIQUITY INDIGO Cotton 100 V 200 S RESTR S,P USA C+ APREA DOE Polyester 52 II 400 S RESTR S,M,P CHI B- PILL RST to CHAIRS, OTTOMANS, PILLOWS on M styles Rayon 48 ARDMORE NIGHT Polyester 100 X 200 S ALL S,M,P CHI C+ ARTBAND SEAGLASS Polyester 100 JJ 400 S RESTR S,P CHI N PILL RST to CHAIRS, OTTOMANS, PILLOWS on M styles Polyester 100 C NEW ASHCOMBE ADMIRAL Cotton 70 FFF 700 S ALL S,M,P CHI N PILL RST to CHAIRS, OTTOMANS, -
Textile Quality Standards
Materials Textiles Quality Control Standards and Testing Procedures At Herman Miller, all materials undergo testing. Initial testing is done when a new product, process, or supplier is accepted. These tests lead to the development of quality standards, which our suppliers take responsibility for meeting. Quality is checked at suppliers, as materials are received in our facilities, and throughout production. All Herman Miller textiles are tested for their ability to stand up to the kind of wear they are likely to get in actual use, including fire retardancy, elongation, strength, and color transfer. Qualities such as surface texture, pattern, ability to absorb or reflect light, ability to conform to product, and ability to respond within an environment when placed next to woods, laminates, glass, carpeting, painted surfaces, or other textiles are also taken into consideration. When possible, our test procedures conform to the methods Flame resistance established by the American Society for Testing and Materials Fabric’s ability to resist burning (ASTM). Herman Miller strives to meet and exceed all industry Note: Test is dictated by the intended end use for the fabric. standards pertaining to our products. Application Passes The Association for Contract Textiles (ACT) has developed five symbols that assure contract fabrics perform to industry Woven Upholstery Vertical Flame Test - California standards and pass all applicable testing. These symbols Technical Bulletin 117-2013 are included on all Herman Miller textile swatch cards where applicable: Panels and Upholstered Walls Tunnel Test - ASTM E 84 (unadhered method) Flame resistance Fabric’s ability to resist burning Vertical Flame Test: Fabric is mounted in a vertical holder and exposed to an open Crocking resistance Fabric’s colorfastness and ability to retain color is flame for a specified amount of time. -
January 2020
SHERRILL FABRIC CATALOG January 2020 Fabric List Fabric Catalog January 2020 GENERAL INFORMATION (1) RAFT: It has been determined by the Joint Industry Fabric Standards Committee that various fabric treatment processes are detrimental to the performance of fabrics. Therefore, neither Sherrill Furniture Company nor the fabric mill can be responsible for any claims made involving fabrics that have Retail Applied Fabric Treatment. (2) The manufacturers of upholstered fabrics do not guarantee their products for wearability or colorfastness; whether "Teflon" treated or not; therefore, we cannot assume this responsibility. We also cannot guarantee match in color items ordered at separate times because of dye lot variations. (3) We do not in any way guarantee that Teflon finish will definitely improve cleaning quality of fabrics. (4) We buy the best quality covers available in each grade, consistent with the present day styles, and cannot guarantee fabric for cleanability, fastness of color, or wearing quality. (5) A number or letter opposite the colors in the different patterns indicate the color set in which you may locate the pattern. Example: P-PRINTS 4-BEIGE/WHITE 7-MELON/RED 2-GREEN 5-GOLD/YELLOW 8-BLUE/BLACK 3-TOAST/CAMEL 6-TURQUOISE Also, italicized numbers following the color set (example: Multi 7 - 17963) indicate the fabric's SKU number. (6) Special features of each (content, repeats, etc.) are listed directly under the pattern colors. (7) All current fabrics are 54 inches wide unless otherwise noted. (8) When "Railroaded" is noted on the list, this denotes that the fabric is shown railroaded in swatches and on furniture. -
Raffia Palm Fibre, Composite, Ortho Unsaturated Polyester, Alkali Treatment
American Journal of Polymer Science 2014, 4(4): 117-121 DOI: 10.5923/j.ajps.20140404.03 The Effect of Alkali Treatment on the Tensile Behaviour and Hardness of Raffia Palm Fibre Reinforced Composites D. C. Anike1,*, T. U. Onuegbu1, I. M. Ogbu2, I. O. Alaekwe1 1Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University Awka, Anambra State, Nigeria 2Department of Chemistry Federal University Ndufu-Alike, Ikwo Ebonyi State, Nigeria Abstract The effects of alkali treatment and fibre loads on the properties of raffia palm fibre polyester composite were studied. Some clean raffia palm fibres were treated with 10% NaOH, and ground. The ground treated and untreated fibres were incorporated into the ortho unsaturated polyester resin. The treated and the untreated fibre composites samples were subjected to tensile tests according to ASTM D638 using instron model 3369. The microhardness test was done by forcing a diamond cone indenter into the surface of the hard specimen, to create an indentation. The significant findings of the results showed that alkali treatment improved the microhardness and extension at break at all fibre loads, better than the untreated fibre composites, with the highest values at 20% (14.40 and 3.47mm for microhardness and extension at break respectively). Tensile strength, tensile strain and modulus of elasticity also improved for alkali treated fibre composites, except in 5% and 20% for tensile strength, 15% for tensile strain, and 15% and 20% for modulus of elasticity, compared to the corresponding fibre loads of untreated fibre composites. Keywords Raffia palm fibre, Composite, Ortho unsaturated polyester, Alkali treatment The main drawbacks of such composites are their water 1. -
Flax and Linen: an Uncertain Oregon Industry by Steve M
Flax and Linen: An Uncertain Oregon Industry By Steve M. Wyatt One of the several painstaking, time-consuming tasks involved in processing flax is shown in this photo from 1946. Here workers bind dried bundles of retted flax, preparing them for scutching, the procedure by which usable fiber is separated from the plant. (Courtesy Horner Museum, Oregon State University) In many languages the word for flax is lin. In Eng lish, then, the two principal products derived from Steve m. WYATT, a lifelong this fibrous plant are known as linen and linseed oil. Fabrics made of flax have a reputation for both Oregon resident currently durability and beauty. Linen, for example, because of living in Newport, wrote his its resilience and strength (which increases by 20 per master's thesis on the Ore cent when wet), has had both military and industrial gon flax industry. applications.1 And linen can also, of course, be woven 150 This content downloaded from 71.34.93.71 on Mon, 02 Sep 2019 14:40:44 UTC All use subject to https://about.jstor.org/terms into fine and beautiful patterns. Linseed oil, a product Oregon's on-again, extracted from the seed of the flax plant, is used to off-again affair make oil-based paints, linoleum, wood preservatives, and rust inhibitors. In addition, doctors and veterinar with the fibrous ians have long used flax seed in poultices to relieve plant and its textile painful and inflamed wounds. At various times in the late nineteenth and twentieth offspring centuries, farmers in Oregon's Willamette Valley have pursued flax cultivation on an industrial scale. -
Fibers and Fabrics; TX335 .A1 U6 NO
KitlQRr Bureau of Standards Reference book' no' to ygjgtv |Oi Admin. Bldg. taken from the library, gmp STATES Ite.WMENT OF COMMERCE PUBLICATION A11ID3 Db3SbD All103063560 Blandford, Josephlne/FIbers and fabrics; TX335 .A1 U6 NO. 1, 1970 C.1 NBS-PUB-R 1 ^TES ‘‘•‘‘'/I'ti'i'.1'1' 1: BBB8 MB A Consumer’s Guide from the Mational Bureau of Standards NBS CIS 1 IIIIShSs Fibers and Fabrics by Josephine M. Blandford and Lois M. Gurel INFORMATION ABOUT NATURAL AND MAN-MADE FIBERS AND FABRICS TO MEET YOUR PARTICULAR NEEDS. NBS CONSUMER INFORMATION SERIES 1 Editor: James E. Payne Issued November 1970 U.S. DEPARTMENT OF COMMERCE Maurice H. Stans, Secretary Rocco C. Siciliano, Under Secretary Myron Tribus, Assistant Secretary for Science and Technology NATIONAL BUREAU OF STANDARDS A Consumer’s Lewis M. Branscomb, Director GUIDE FROM THE) NATIONAL BUREAU OF STANDARDS For sale by the Superintendent of Documents, U.S. Government Printing Office, U.S. DEPARTMENT Washington, D.C. 20402. OF COMMERCE Price 65 cents. NATIONAL BUREAU OF STANDARDS APR 1 0 1971 FOREWORD Technology is changing not only the products you buy, but the marketplace as well. Unfortunately, this is not an unmixed blessing. Products are constantly being improved, but designs are complicated, quality is vari¬ able, and good advice is hard to get. Modern stores and merchandising bring you a wide variety of products; but the large number of choices and the lack of dependable infor¬ mation often make shopping a confusing and frustrating experience. A generation ago the merchant was likely to be a friend of the family. -
Thermal Behaviour of Flax Kenaf Hybrid Natural Fiber Composite
ISSN: 2350-0328 International Journal of Advanced Research in Science, Engineering and Technology Vol. 2, Issue 10 , October 2015 Thermal Behaviour of Flax Kenaf Hybrid Natural Fiber Composite V.S. Srinivasan, S. Rajendra Boopathy, B. Vijaya Ramnath Department of Mechanical Engineering, CEGC, Anna University, Chennai-25. Department of Mechanical Engineering, CEGC, Anna University, Chennai-25. Department of Mechanical Engineering, Sri Sairam Engineering College, Chennai-44. ABSTRACT: In this work, natural fibers of flax and kenaf are used. Hybrid materials are given importance as they play very important role in all applications and characterizations. This paper deals with one of such hybrid composite made of natural fibers namely, kenaf and flax fibers. The hybrid built-up is such that one layer of kenaf is sandwiched between two layers of flax fibres by hand layup method with a volume fraction of 40% using Epoxy resin and HY951 hardener. Glass fiber reinforcement polymer (GFRP) is used for lamination on both sides. Thermal properties are investigated for single fiber composites and kenaf - flax with GFRP hybrid composites. The hybrid composites have better thermal stability than single fibre composites. KEYWORDS: Flax, Kenaf, GFRP, Thermal behavior 1. INTRODUCTION The usage of natural fiber- reinforced composite materials is rapidly growing both in industries and in various research activities. The advantages of fibers are cheap, recyclable and biodegradable. Plants such as flax, hemp, cotton sisal, kenaf, banana etc., are the most used reinforcements of composites. They are used widely for manufacturing composites because of their easy availability, renewability, low density, and low price. The natural fiber containing composites are more environmental friendly and are used in transportation (automobiles, railway coaches, aerospace etc.,), military applications, building and construction industries in paneling and partition boards, packaging, consumer products etc. -
An Analysis of the Abaca Natural Fiber in Reinforcing Concrete Composites As a Construction Material in Developing Countries
University of Northern Iowa UNI ScholarWorks Dissertations and Theses @ UNI Student Work 1988 An analysis of the abaca natural fiber in einforr cing concrete composites as a construction material in developing countries Rolando V. Magdamo University of Northern Iowa Let us know how access to this document benefits ouy Copyright ©1988 Rolando V. Magdamo Follow this and additional works at: https://scholarworks.uni.edu/etd Part of the Construction Engineering and Management Commons, and the Materials Science and Engineering Commons Recommended Citation Magdamo, Rolando V., "An analysis of the abaca natural fiber in einforr cing concrete composites as a construction material in developing countries" (1988). Dissertations and Theses @ UNI. 865. https://scholarworks.uni.edu/etd/865 This Open Access Dissertation is brought to you for free and open access by the Student Work at UNI ScholarWorks. It has been accepted for inclusion in Dissertations and Theses @ UNI by an authorized administrator of UNI ScholarWorks. For more information, please contact [email protected]. INFORMATION TO USERS The most advanced technology has been used to photo graph and reproduce this manuscript from the microfilm master. UMI films the text directly from the original or copy submitted. Thus, some thesis and dissertation copies are in typewriter face, while others may be from any type of computer printer. The quality of this reproduction is dependent upon the quality of the copy submitted. Broken or indistinct print, colored or poor quality illustrations and photographs, print bleedthrough, substandard margins, and improper alignment can adversely affect reproduction. In the unlikely event that the author did not send UMI a complete manuscript and there are missing pages, these will be noted.