INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: FCW02 - 0970G3 Part No.: 1101522447_DOM 3 ASSEMBLY (CONTD.) 4 TO PLAY Trim Size: 840mm X 297mm Folded Size: Type of Fold: accordian Push vehicle through the booster to launch! Race along the outside lane! Divert vehicle into the winner’s circle. ULTIMATE FLORIDA SPEEDWAY # colors: One 9 1 1 3 a N3 N3 N2 N2 N1 N1 INSTRUCTIONS Colors: Black 4+ Paper Stock: Paper Weight: Please keep these instructions for future reference as they contain important information. EDM No.:
A16 CONTENTS A1 A2 A1 A15 A5 A4 A3 A2 A3 A7 3 a2 b2 A8 A4 A6 b A7 A19 A8 A9 A6 A9 A10 A13 A17 1 A5 A12 A14 5 Cover A11 A10 A11 B2 A15 B4 B1 A14 A16 Click! B7 B8 B6 B3 Click! a A18 A12 A13 B5 A19 A21 A21 = OFF A20 A20 = ON (NORMAL) A18 D2 A17 N3 N3 b1 N3 N3 N2 N2 N1 N1 = ON (FAST) N2 N1 N2 N1 D1 Power on before play. Adjust speed settings for best performance. 4 Load stands with additional vehicles. C1 N1 N1 N3 Easy to N2 N3 C2 2 Change lanes and launch again! Race along the inside lane! connect! N2 E L2 R2 F4 F4 E 10 F1 F1
10
10 15
15 L1 R1 10
17 B4 B5 B7 20 B1 B2 B3 19 18 22 21 1 24
24 22 25 2 23 26
24 3 5 11 5 WARNING: 5 4 11 CHOKING HAZARD – Small parts. 12 B6 B8 7 Not for children under 3 years. 6 8 9
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
One vehicle included. Others shown sold separately, subject to availability. Not for use with some Cars vehicles. FCW02 - 0970G3 © Disney/Pixar www.disney.com/cars service.mattel.com 1101522447 - DOM 6 7 8 1
6 of 8 page 7 of 8 page 8 of 8 page 1 of 8 page
1 APPLY LABELS 2 BATTERY INSTALLATION 3 ASSEMBLY (CONTD.)
• Requires 4 "D" size (LR20) alkaline batteries (not included). HELPFUL HINT: Apply labels before assembly by numbers as indicated. a b c a b B6 • Unscrew the battery cover with a Phillips head screwdriver (not included). 2 6 • Install 4 "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown. • Replace battery cover and tighten screws. B7 B5 1 2 3 4 5 6 7 8 • For longer life use alkaline batteries. B8 • Replace batteries when booster can no longer propel car through the track set. A9 • Dispose of batteries safely. A8 • When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove BACK VIEW B4 and re-install the batteries. C1 Click!
B3 18 23 • The supply terminals are not to be short-circuited. BATTERY SAFETY INFORMATION A14 • Dispose of battery(ies) safely. A19 In exceptional circumstances batteries may leak fluids that can cause a chemical a b c B2 burn injury or ruin your product. To avoid battery leakage: • Do not dispose of this product in a fire. The batteries inside may explode or leak. 3 9 10 18 19 10 12 13 • Non-rechargeable batteries are not to be recharged. A18 B1 • Rechargeable batteries are to be removed from the product before being charged. A18 B3 A20 A20 A3 • Rechargeable batteries are only to be charged under adult supervision. A21 A21 A2 • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Protect the environment by not disposing of this product or any A9 A1 A10 • Do not mix old and new batteries. batteries with household waste. This symbol indicates that this A8 A8 product shall not be treated as household waste. Check your local 7 A2 • Only batteries of the same or equivalent type as recommended are to be used. A16 • Batteries are to be inserted with the correct polarity. authority for recycling advice and facilities. A17 • Exhausted batteries are to be removed from the product. 14 11 24 15 A17 A6 A16 FOR PRODUCT SOLD IN USA A15 A1 A1 A15 A19 This device complies with Part 15 of the FCC Rules. A17 A16 A18 C2 Operation is subject to the following two conditions: 4 A7 A7 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is A19 C2 15 16 24 17 11 encouraged to try to correct the interference by one or more of the following measures: A19 A20 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. A17 A18 A4 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. A3 • Consult the dealer or an experienced radio/TV technician for help. A16 A16 NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. a A21 8 b E
Refer to letters shown for easy assembly. 3 ASSEMBLY R2 R2 L2 L2 22 26 11 13 21 22 E
A11 1 A10 A8 A7 A8 A7 5 R1 R1 L1 L1 A6 A6 A7 A19 A8 A9 A10 A10 A9 A11 A11 A5 20 A12 24 11 25 16 10 15 A5 A12 c A4 A4 A16 A13 A14 A13 A15 A14 A14 A13 A14 A1 A15 A3 A3 A2 A2
2 3 4 5
2 of 8 page 3 of 8 page 4 of 8 page 5 of 8 page INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: FCW02 - 0970G3 Part No.: 1101522447_DOM 3 ASSEMBLY (CONTD.) 4 TO PLAY Trim Size: 840mm X 297mm Folded Size: Type of Fold: accordian Push vehicle through the booster to launch! Race along the outside lane! Divert vehicle into the winner’s circle. ULTIMATE FLORIDA SPEEDWAY # colors: One 9 1 1 3 a N3 N3 N2 N2 N1 N1 INSTRUCTIONS Colors: Black 4+ Paper Stock: Paper Weight: Please keep these instructions for future reference as they contain important information. EDM No.:
A16 CONTENTS A1 A2 A1 A15 A5 A4 A3 A2 A3 A7 3 a2 b2 A8 A4 A6 b A7 A19 A8 A9 A6 A9 A10 A13 A17 1 A5 A12 A14 5 Cover A11 A10 A11 B2 A15 B4 B1 A14 A16 Click! B7 B8 B6 B3 Click! a A18 A12 A13 B5 A19 A21 A21 = OFF A20 A20 = ON (NORMAL) A18 D2 A17 N3 N3 b1 N3 N3 N2 N2 N1 N1 = ON (FAST) N2 N1 N2 N1 D1 Power on before play. Adjust speed settings for best performance. 4 Load stands with additional vehicles. C1 N1 N1 N3 Easy to N2 N3 C2 2 Change lanes and launch again! Race along the inside lane! connect! N2 E L2 R2 F4 F4 E 10 F1 F1
10
10 15
15 L1 R1 10
17 B4 B5 B7 20 B1 B2 B3 19 18 22 21 1 24
24 22 25 2 23 26
24 3 5 11 5 WARNING: 5 4 11 CHOKING HAZARD – Small parts. 12 B6 B8 7 Not for children under 3 years. 6 8 9
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
One vehicle included. Others shown sold separately, subject to availability. Not for use with some Cars vehicles. FCW02 - 0970G3 © Disney/Pixar www.disney.com/cars service.mattel.com 1101522447 - DOM 6 7 8 1
6 of 8 page 7 of 8 page 8 of 8 page 1 of 8 page
1 APPLY LABELS 2 BATTERY INSTALLATION 3 ASSEMBLY (CONTD.)
• Requires 4 "D" size (LR20) alkaline batteries (not included). HELPFUL HINT: Apply labels before assembly by numbers as indicated. a b c a b B6 • Unscrew the battery cover with a Phillips head screwdriver (not included). 2 6 • Install 4 "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown. • Replace battery cover and tighten screws. B7 B5 1 2 3 4 5 6 7 8 • For longer life use alkaline batteries. B8 • Replace batteries when booster can no longer propel car through the track set. A9 • Dispose of batteries safely. A8 • When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove BACK VIEW B4 and re-install the batteries. C1 Click!
B3 18 23 • The supply terminals are not to be short-circuited. BATTERY SAFETY INFORMATION A14 • Dispose of battery(ies) safely. A19 In exceptional circumstances batteries may leak fluids that can cause a chemical a b c B2 burn injury or ruin your product. To avoid battery leakage: • Do not dispose of this product in a fire. The batteries inside may explode or leak. 3 9 10 18 19 10 12 13 • Non-rechargeable batteries are not to be recharged. A18 B1 • Rechargeable batteries are to be removed from the product before being charged. A18 B3 A20 A20 A3 • Rechargeable batteries are only to be charged under adult supervision. A21 A21 A2 • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Protect the environment by not disposing of this product or any A9 A1 A10 • Do not mix old and new batteries. batteries with household waste. This symbol indicates that this A8 A8 product shall not be treated as household waste. Check your local 7 A2 • Only batteries of the same or equivalent type as recommended are to be used. A16 • Batteries are to be inserted with the correct polarity. authority for recycling advice and facilities. A17 • Exhausted batteries are to be removed from the product. 14 11 24 15 A17 A6 A16 FOR PRODUCT SOLD IN USA A15 A1 A1 A15 A19 This device complies with Part 15 of the FCC Rules. A17 A16 A18 C2 Operation is subject to the following two conditions: 4 A7 A7 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is A19 C2 15 16 24 17 11 encouraged to try to correct the interference by one or more of the following measures: A19 A20 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. A17 A18 A4 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. A3 • Consult the dealer or an experienced radio/TV technician for help. A16 A16 NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. a A21 8 b E
Refer to letters shown for easy assembly. 3 ASSEMBLY R2 R2 L2 L2 22 26 11 13 21 22 E
A11 1 A10 A8 A7 A8 A7 5 R1 R1 L1 L1 A6 A6 A7 A19 A8 A9 A10 A10 A9 A11 A11 A5 20 A12 24 11 25 16 10 15 A5 A12 c A4 A4 A16 A13 A14 A13 A15 A14 A14 A13 A14 A1 A15 A3 A3 A2 A2
2 3 4 5
2 of 8 page 3 of 8 page 4 of 8 page 5 of 8 page INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: FCW02 - 0970G3 Part No.: 1101522447_DOM 3 ASSEMBLY (CONTD.) 4 TO PLAY Trim Size: 840mm X 297mm Folded Size: Type of Fold: accordian Push vehicle through the booster to launch! Race along the outside lane! Divert vehicle into the winner’s circle. ULTIMATE FLORIDA SPEEDWAY # colors: One 9 1 1 3 a N3 N3 N2 N2 N1 N1 INSTRUCTIONS Colors: Black 4+ Paper Stock: Paper Weight: Please keep these instructions for future reference as they contain important information. EDM No.:
A16 CONTENTS A1 A2 A1 A15 A5 A4 A3 A2 A3 A7 3 a2 b2 A8 A4 A6 b A7 A19 A8 A9 A6 A9 A10 A13 A17 1 A5 A12 A14 5 Cover A11 A10 A11 B2 A15 B4 B1 A14 A16 Click! B7 B8 B6 B3 Click! a A18 A12 A13 B5 A19 A21 A21 = OFF A20 A20 = ON (NORMAL) A18 D2 A17 N3 N3 b1 N3 N3 N2 N2 N1 N1 = ON (FAST) N2 N1 N2 N1 D1 Power on before play. Adjust speed settings for best performance. 4 Load stands with additional vehicles. C1 N1 N1 N3 Easy to N2 N3 C2 2 Change lanes and launch again! Race along the inside lane! connect! N2 E L2 R2 F4 F4 E 10 F1 F1
10
10 15
15 L1 R1 10
17 B4 B5 B7 20 B1 B2 B3 19 18 22 21 1 24
24 22 25 2 23 26
24 3 5 11 5 WARNING: 5 4 11 CHOKING HAZARD – Small parts. 12 B6 B8 7 Not for children under 3 years. 6 8 9
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
One vehicle included. Others shown sold separately, subject to availability. Not for use with some Cars vehicles. FCW02 - 0970G3 © Disney/Pixar www.disney.com/cars service.mattel.com 1101522447 - DOM 6 7 8 1
6 of 8 page 7 of 8 page 8 of 8 page 1 of 8 page
1 APPLY LABELS 2 BATTERY INSTALLATION 3 ASSEMBLY (CONTD.)
• Requires 4 "D" size (LR20) alkaline batteries (not included). HELPFUL HINT: Apply labels before assembly by numbers as indicated. a b c a b B6 • Unscrew the battery cover with a Phillips head screwdriver (not included). 2 6 • Install 4 "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown. • Replace battery cover and tighten screws. B7 B5 1 2 3 4 5 6 7 8 • For longer life use alkaline batteries. B8 • Replace batteries when booster can no longer propel car through the track set. A9 • Dispose of batteries safely. A8 • When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove BACK VIEW B4 and re-install the batteries. C1 Click!
B3 18 23 • The supply terminals are not to be short-circuited. BATTERY SAFETY INFORMATION A14 • Dispose of battery(ies) safely. A19 In exceptional circumstances batteries may leak fluids that can cause a chemical a b c B2 burn injury or ruin your product. To avoid battery leakage: • Do not dispose of this product in a fire. The batteries inside may explode or leak. 3 9 10 18 19 10 12 13 • Non-rechargeable batteries are not to be recharged. A18 B1 • Rechargeable batteries are to be removed from the product before being charged. A18 B3 A20 A20 A3 • Rechargeable batteries are only to be charged under adult supervision. A21 A21 A2 • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Protect the environment by not disposing of this product or any A9 A1 A10 • Do not mix old and new batteries. batteries with household waste. This symbol indicates that this A8 A8 product shall not be treated as household waste. Check your local 7 A2 • Only batteries of the same or equivalent type as recommended are to be used. A16 • Batteries are to be inserted with the correct polarity. authority for recycling advice and facilities. A17 • Exhausted batteries are to be removed from the product. 14 11 24 15 A17 A6 A16 FOR PRODUCT SOLD IN USA A15 A1 A1 A15 A19 This device complies with Part 15 of the FCC Rules. A17 A16 A18 C2 Operation is subject to the following two conditions: 4 A7 A7 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is A19 C2 15 16 24 17 11 encouraged to try to correct the interference by one or more of the following measures: A19 A20 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. A17 A18 A4 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. A3 • Consult the dealer or an experienced radio/TV technician for help. A16 A16 NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. a A21 8 b E
Refer to letters shown for easy assembly. 3 ASSEMBLY R2 R2 L2 L2 22 26 11 13 21 22 E
A11 1 A10 A8 A7 A8 A7 5 R1 R1 L1 L1 A6 A6 A7 A19 A8 A9 A10 A10 A9 A11 A11 A5 20 A12 24 11 25 16 10 15 A5 A12 c A4 A4 A16 A13 A14 A13 A15 A14 A14 A13 A14 A1 A15 A3 A3 A2 A2
2 3 4 5
2 of 8 page 3 of 8 page 4 of 8 page 5 of 8 page INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: FCW02 - 0970G3 Part No.: 1101522447_DOM 3 ASSEMBLY (CONTD.) 4 TO PLAY Trim Size: 840mm X 297mm Folded Size: Type of Fold: accordian Push vehicle through the booster to launch! Race along the outside lane! Divert vehicle into the winner’s circle. ULTIMATE FLORIDA SPEEDWAY # colors: One 9 1 1 3 a N3 N3 N2 N2 N1 N1 INSTRUCTIONS Colors: Black 4+ Paper Stock: Paper Weight: Please keep these instructions for future reference as they contain important information. EDM No.:
A16 CONTENTS A1 A2 A1 A15 A5 A4 A3 A2 A3 A7 3 a2 b2 A8 A4 A6 b A7 A19 A8 A9 A6 A9 A10 A13 A17 1 A5 A12 A14 5 Cover A11 A10 A11 B2 A15 B4 B1 A14 A16 Click! B7 B8 B6 B3 Click! a A18 A12 A13 B5 A19 A21 A21 = OFF A20 A20 = ON (NORMAL) A18 D2 A17 N3 N3 b1 N3 N3 N2 N2 N1 N1 = ON (FAST) N2 N1 N2 N1 D1 Power on before play. Adjust speed settings for best performance. 4 Load stands with additional vehicles. C1 N1 N1 N3 Easy to N2 N3 C2 2 Change lanes and launch again! Race along the inside lane! connect! N2 E L2 R2 F4 F4 E 10 F1 F1
10
10 15
15 L1 R1 10
17 B4 B5 B7 20 B1 B2 B3 19 18 22 21 1 24
24 22 25 2 23 26
24 3 5 11 5 WARNING: 5 4 11 CHOKING HAZARD – Small parts. 12 B6 B8 7 Not for children under 3 years. 6 8 9
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
One vehicle included. Others shown sold separately, subject to availability. Not for use with some Cars vehicles. FCW02 - 0970G3 © Disney/Pixar www.disney.com/cars service.mattel.com 1101522447 - DOM 6 7 8 1
6 of 8 page 7 of 8 page 8 of 8 page 1 of 8 page
1 APPLY LABELS 2 BATTERY INSTALLATION 3 ASSEMBLY (CONTD.)
• Requires 4 "D" size (LR20) alkaline batteries (not included). HELPFUL HINT: Apply labels before assembly by numbers as indicated. a b c a b B6 • Unscrew the battery cover with a Phillips head screwdriver (not included). 2 6 • Install 4 "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown. • Replace battery cover and tighten screws. B7 B5 1 2 3 4 5 6 7 8 • For longer life use alkaline batteries. B8 • Replace batteries when booster can no longer propel car through the track set. A9 • Dispose of batteries safely. A8 • When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove BACK VIEW B4 and re-install the batteries. C1 Click!
B3 18 23 • The supply terminals are not to be short-circuited. BATTERY SAFETY INFORMATION A14 • Dispose of battery(ies) safely. A19 In exceptional circumstances batteries may leak fluids that can cause a chemical a b c B2 burn injury or ruin your product. To avoid battery leakage: • Do not dispose of this product in a fire. The batteries inside may explode or leak. 3 9 10 18 19 10 12 13 • Non-rechargeable batteries are not to be recharged. A18 B1 • Rechargeable batteries are to be removed from the product before being charged. A18 B3 A20 A20 A3 • Rechargeable batteries are only to be charged under adult supervision. A21 A21 A2 • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Protect the environment by not disposing of this product or any A9 A1 A10 • Do not mix old and new batteries. batteries with household waste. This symbol indicates that this A8 A8 product shall not be treated as household waste. Check your local 7 A2 • Only batteries of the same or equivalent type as recommended are to be used. A16 • Batteries are to be inserted with the correct polarity. authority for recycling advice and facilities. A17 • Exhausted batteries are to be removed from the product. 14 11 24 15 A17 A6 A16 FOR PRODUCT SOLD IN USA A15 A1 A1 A15 A19 This device complies with Part 15 of the FCC Rules. A17 A16 A18 C2 Operation is subject to the following two conditions: 4 A7 A7 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is A19 C2 15 16 24 17 11 encouraged to try to correct the interference by one or more of the following measures: A19 A20 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. A17 A18 A4 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. A3 • Consult the dealer or an experienced radio/TV technician for help. A16 A16 NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. a A21 8 b E
Refer to letters shown for easy assembly. 3 ASSEMBLY R2 R2 L2 L2 22 26 11 13 21 22 E
A11 1 A10 A8 A7 A8 A7 5 R1 R1 L1 L1 A6 A6 A7 A19 A8 A9 A10 A10 A9 A11 A11 A5 20 A12 24 11 25 16 10 15 A5 A12 c A4 A4 A16 A13 A14 A13 A15 A14 A14 A13 A14 A1 A15 A3 A3 A2 A2
2 3 4 5
2 of 8 page 3 of 8 page 4 of 8 page 5 of 8 page INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: FCW02 - 0970G3 Part No.: 1101522447_DOM 3 ASSEMBLY (CONTD.) 4 TO PLAY Trim Size: 840mm X 297mm Folded Size: Type of Fold: accordian Push vehicle through the booster to launch! Race along the outside lane! Divert vehicle into the winner’s circle. ULTIMATE FLORIDA SPEEDWAY # colors: One 9 1 1 3 a N3 N3 N2 N2 N1 N1 INSTRUCTIONS Colors: Black 4+ Paper Stock: Paper Weight: Please keep these instructions for future reference as they contain important information. EDM No.:
A16 CONTENTS A1 A2 A1 A15 A5 A4 A3 A2 A3 A7 3 a2 b2 A8 A4 A6 b A7 A19 A8 A9 A6 A9 A10 A13 A17 1 A5 A12 A14 5 Cover A11 A10 A11 B2 A15 B4 B1 A14 A16 Click! B7 B8 B6 B3 Click! a A18 A12 A13 B5 A19 A21 A21 = OFF A20 A20 = ON (NORMAL) A18 D2 A17 N3 N3 b1 N3 N3 N2 N2 N1 N1 = ON (FAST) N2 N1 N2 N1 D1 Power on before play. Adjust speed settings for best performance. 4 Load stands with additional vehicles. C1 N1 N1 N3 Easy to N2 N3 C2 2 Change lanes and launch again! Race along the inside lane! connect! N2 E L2 R2 F4 F4 E 10 F1 F1
10
10 15
15 L1 R1 10
17 B4 B5 B7 20 B1 B2 B3 19 18 22 21 1 24
24 22 25 2 23 26
24 3 5 11 5 WARNING: 5 4 11 CHOKING HAZARD – Small parts. 12 B6 B8 7 Not for children under 3 years. 6 8 9
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
One vehicle included. Others shown sold separately, subject to availability. Not for use with some Cars vehicles. FCW02 - 0970G3 © Disney/Pixar www.disney.com/cars service.mattel.com 1101522447 - DOM 6 7 8 1
6 of 8 page 7 of 8 page 8 of 8 page 1 of 8 page
1 APPLY LABELS 2 BATTERY INSTALLATION 3 ASSEMBLY (CONTD.)
• Requires 4 "D" size (LR20) alkaline batteries (not included). HELPFUL HINT: Apply labels before assembly by numbers as indicated. a b c a b B6 • Unscrew the battery cover with a Phillips head screwdriver (not included). 2 6 • Install 4 "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown. • Replace battery cover and tighten screws. B7 B5 1 2 3 4 5 6 7 8 • For longer life use alkaline batteries. B8 • Replace batteries when booster can no longer propel car through the track set. A9 • Dispose of batteries safely. A8 • When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove BACK VIEW B4 and re-install the batteries. C1 Click!
B3 18 23 • The supply terminals are not to be short-circuited. BATTERY SAFETY INFORMATION A14 • Dispose of battery(ies) safely. A19 In exceptional circumstances batteries may leak fluids that can cause a chemical a b c B2 burn injury or ruin your product. To avoid battery leakage: • Do not dispose of this product in a fire. The batteries inside may explode or leak. 3 9 10 18 19 10 12 13 • Non-rechargeable batteries are not to be recharged. A18 B1 • Rechargeable batteries are to be removed from the product before being charged. A18 B3 A20 A20 A3 • Rechargeable batteries are only to be charged under adult supervision. A21 A21 A2 • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Protect the environment by not disposing of this product or any A9 A1 A10 • Do not mix old and new batteries. batteries with household waste. This symbol indicates that this A8 A8 product shall not be treated as household waste. Check your local 7 A2 • Only batteries of the same or equivalent type as recommended are to be used. A16 • Batteries are to be inserted with the correct polarity. authority for recycling advice and facilities. A17 • Exhausted batteries are to be removed from the product. 14 11 24 15 A17 A6 A16 FOR PRODUCT SOLD IN USA A15 A1 A1 A15 A19 This device complies with Part 15 of the FCC Rules. A17 A16 A18 C2 Operation is subject to the following two conditions: 4 A7 A7 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is A19 C2 15 16 24 17 11 encouraged to try to correct the interference by one or more of the following measures: A19 A20 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. A17 A18 A4 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. A3 • Consult the dealer or an experienced radio/TV technician for help. A16 A16 NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. a A21 8 b E
Refer to letters shown for easy assembly. 3 ASSEMBLY R2 R2 L2 L2 22 26 11 13 21 22 E
A11 1 A10 A8 A7 A8 A7 5 R1 R1 L1 L1 A6 A6 A7 A19 A8 A9 A10 A10 A9 A11 A11 A5 20 A12 24 11 25 16 10 15 A5 A12 c A4 A4 A16 A13 A14 A13 A15 A14 A14 A13 A14 A1 A15 A3 A3 A2 A2
2 3 4 5
2 of 8 page 3 of 8 page 4 of 8 page 5 of 8 page INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: FCW02 - 0970G3 Part No.: 1101522447_DOM 3 ASSEMBLY (CONTD.) 4 TO PLAY Trim Size: 840mm X 297mm Folded Size: Type of Fold: accordian Push vehicle through the booster to launch! Race along the outside lane! Divert vehicle into the winner’s circle. ULTIMATE FLORIDA SPEEDWAY # colors: One 9 1 1 3 a N3 N3 N2 N2 N1 N1 INSTRUCTIONS Colors: Black 4+ Paper Stock: Paper Weight: Please keep these instructions for future reference as they contain important information. EDM No.:
A16 CONTENTS A1 A2 A1 A15 A5 A4 A3 A2 A3 A7 3 a2 b2 A8 A4 A6 b A7 A19 A8 A9 A6 A9 A10 A13 A17 1 A5 A12 A14 5 Cover A11 A10 A11 B2 A15 B4 B1 A14 A16 Click! B7 B8 B6 B3 Click! a A18 A12 A13 B5 A19 A21 A21 = OFF A20 A20 = ON (NORMAL) A18 D2 A17 N3 N3 b1 N3 N3 N2 N2 N1 N1 = ON (FAST) N2 N1 N2 N1 D1 Power on before play. Adjust speed settings for best performance. 4 Load stands with additional vehicles. C1 N1 N1 N3 Easy to N2 N3 C2 2 Change lanes and launch again! Race along the inside lane! connect! N2 E L2 R2 F4 F4 E 10 F1 F1
10
10 15
15 L1 R1 10
17 B4 B5 B7 20 B1 B2 B3 19 18 22 21 1 24
24 22 25 2 23 26
24 3 5 11 5 WARNING: 5 4 11 CHOKING HAZARD – Small parts. 12 B6 B8 7 Not for children under 3 years. 6 8 9
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
One vehicle included. Others shown sold separately, subject to availability. Not for use with some Cars vehicles. FCW02 - 0970G3 © Disney/Pixar www.disney.com/cars service.mattel.com 1101522447 - DOM 6 7 8 1
6 of 8 page 7 of 8 page 8 of 8 page 1 of 8 page
1 APPLY LABELS 2 BATTERY INSTALLATION 3 ASSEMBLY (CONTD.)
• Requires 4 "D" size (LR20) alkaline batteries (not included). HELPFUL HINT: Apply labels before assembly by numbers as indicated. a b c a b B6 • Unscrew the battery cover with a Phillips head screwdriver (not included). 2 6 • Install 4 "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown. • Replace battery cover and tighten screws. B7 B5 1 2 3 4 5 6 7 8 • For longer life use alkaline batteries. B8 • Replace batteries when booster can no longer propel car through the track set. A9 • Dispose of batteries safely. A8 • When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove BACK VIEW B4 and re-install the batteries. C1 Click!
B3 18 23 • The supply terminals are not to be short-circuited. BATTERY SAFETY INFORMATION A14 • Dispose of battery(ies) safely. A19 In exceptional circumstances batteries may leak fluids that can cause a chemical a b c B2 burn injury or ruin your product. To avoid battery leakage: • Do not dispose of this product in a fire. The batteries inside may explode or leak. 3 9 10 18 19 10 12 13 • Non-rechargeable batteries are not to be recharged. A18 B1 • Rechargeable batteries are to be removed from the product before being charged. A18 B3 A20 A20 A3 • Rechargeable batteries are only to be charged under adult supervision. A21 A21 A2 • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Protect the environment by not disposing of this product or any A9 A1 A10 • Do not mix old and new batteries. batteries with household waste. This symbol indicates that this A8 A8 product shall not be treated as household waste. Check your local 7 A2 • Only batteries of the same or equivalent type as recommended are to be used. A16 • Batteries are to be inserted with the correct polarity. authority for recycling advice and facilities. A17 • Exhausted batteries are to be removed from the product. 14 11 24 15 A17 A6 A16 FOR PRODUCT SOLD IN USA A15 A1 A1 A15 A19 This device complies with Part 15 of the FCC Rules. A17 A16 A18 C2 Operation is subject to the following two conditions: 4 A7 A7 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is A19 C2 15 16 24 17 11 encouraged to try to correct the interference by one or more of the following measures: A19 A20 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. A17 A18 A4 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. A3 • Consult the dealer or an experienced radio/TV technician for help. A16 A16 NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. a A21 8 b E
Refer to letters shown for easy assembly. 3 ASSEMBLY R2 R2 L2 L2 22 26 11 13 21 22 E
A11 1 A10 A8 A7 A8 A7 5 R1 R1 L1 L1 A6 A6 A7 A19 A8 A9 A10 A10 A9 A11 A11 A5 20 A12 24 11 25 16 10 15 A5 A12 c A4 A4 A16 A13 A14 A13 A15 A14 A14 A13 A14 A1 A15 A3 A3 A2 A2
2 3 4 5
2 of 8 page 3 of 8 page 4 of 8 page 5 of 8 page INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: FCW02 - 0970G3 Part No.: 1101522447_DOM 3 ASSEMBLY (CONTD.) 4 TO PLAY Trim Size: 840mm X 297mm Folded Size: Type of Fold: accordian Push vehicle through the booster to launch! Race along the outside lane! Divert vehicle into the winner’s circle. ULTIMATE FLORIDA SPEEDWAY # colors: One 9 1 1 3 a N3 N3 N2 N2 N1 N1 INSTRUCTIONS Colors: Black 4+ Paper Stock: Paper Weight: Please keep these instructions for future reference as they contain important information. EDM No.:
A16 CONTENTS A1 A2 A1 A15 A5 A4 A3 A2 A3 A7 3 a2 b2 A8 A4 A6 b A7 A19 A8 A9 A6 A9 A10 A13 A17 1 A5 A12 A14 5 Cover A11 A10 A11 B2 A15 B4 B1 A14 A16 Click! B7 B8 B6 B3 Click! a A18 A12 A13 B5 A19 A21 A21 = OFF A20 A20 = ON (NORMAL) A18 D2 A17 N3 N3 b1 N3 N3 N2 N2 N1 N1 = ON (FAST) N2 N1 N2 N1 D1 Power on before play. Adjust speed settings for best performance. 4 Load stands with additional vehicles. C1 N1 N1 N3 Easy to N2 N3 C2 2 Change lanes and launch again! Race along the inside lane! connect! N2 E L2 R2 F4 F4 E 10 F1 F1
10
10 15
15 L1 R1 10
17 B4 B5 B7 20 B1 B2 B3 19 18 22 21 1 24
24 22 25 2 23 26
24 3 5 11 5 WARNING: 5 4 11 CHOKING HAZARD – Small parts. 12 B6 B8 7 Not for children under 3 years. 6 8 9
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
One vehicle included. Others shown sold separately, subject to availability. Not for use with some Cars vehicles. FCW02 - 0970G3 © Disney/Pixar www.disney.com/cars service.mattel.com 1101522447 - DOM 6 7 8 1
6 of 8 page 7 of 8 page 8 of 8 page 1 of 8 page
1 APPLY LABELS 2 BATTERY INSTALLATION 3 ASSEMBLY (CONTD.)
• Requires 4 "D" size (LR20) alkaline batteries (not included). HELPFUL HINT: Apply labels before assembly by numbers as indicated. a b c a b B6 • Unscrew the battery cover with a Phillips head screwdriver (not included). 2 6 • Install 4 "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown. • Replace battery cover and tighten screws. B7 B5 1 2 3 4 5 6 7 8 • For longer life use alkaline batteries. B8 • Replace batteries when booster can no longer propel car through the track set. A9 • Dispose of batteries safely. A8 • When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove BACK VIEW B4 and re-install the batteries. C1 Click!
B3 18 23 • The supply terminals are not to be short-circuited. BATTERY SAFETY INFORMATION A14 • Dispose of battery(ies) safely. A19 In exceptional circumstances batteries may leak fluids that can cause a chemical a b c B2 burn injury or ruin your product. To avoid battery leakage: • Do not dispose of this product in a fire. The batteries inside may explode or leak. 3 9 10 18 19 10 12 13 • Non-rechargeable batteries are not to be recharged. A18 B1 • Rechargeable batteries are to be removed from the product before being charged. A18 B3 A20 A20 A3 • Rechargeable batteries are only to be charged under adult supervision. A21 A21 A2 • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Protect the environment by not disposing of this product or any A9 A1 A10 • Do not mix old and new batteries. batteries with household waste. This symbol indicates that this A8 A8 product shall not be treated as household waste. Check your local 7 A2 • Only batteries of the same or equivalent type as recommended are to be used. A16 • Batteries are to be inserted with the correct polarity. authority for recycling advice and facilities. A17 • Exhausted batteries are to be removed from the product. 14 11 24 15 A17 A6 A16 FOR PRODUCT SOLD IN USA A15 A1 A1 A15 A19 This device complies with Part 15 of the FCC Rules. A17 A16 A18 C2 Operation is subject to the following two conditions: 4 A7 A7 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is A19 C2 15 16 24 17 11 encouraged to try to correct the interference by one or more of the following measures: A19 A20 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. A17 A18 A4 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. A3 • Consult the dealer or an experienced radio/TV technician for help. A16 A16 NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. a A21 8 b E
Refer to letters shown for easy assembly. 3 ASSEMBLY R2 R2 L2 L2 22 26 11 13 21 22 E
A11 1 A10 A8 A7 A8 A7 5 R1 R1 L1 L1 A6 A6 A7 A19 A8 A9 A10 A10 A9 A11 A11 A5 20 A12 24 11 25 16 10 15 A5 A12 c A4 A4 A16 A13 A14 A13 A15 A14 A14 A13 A14 A1 A15 A3 A3 A2 A2
2 3 4 5
2 of 8 page 3 of 8 page 4 of 8 page 5 of 8 page INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: FCW02 - 0970G3 Part No.: 1101522447_DOM 3 ASSEMBLY (CONTD.) 4 TO PLAY Trim Size: 840mm X 297mm Folded Size: Type of Fold: accordian Push vehicle through the booster to launch! Race along the outside lane! Divert vehicle into the winner’s circle. ULTIMATE FLORIDA SPEEDWAY # colors: One 9 1 1 3 a N3 N3 N2 N2 N1 N1 INSTRUCTIONS Colors: Black 4+ Paper Stock: Paper Weight: Please keep these instructions for future reference as they contain important information. EDM No.:
A16 CONTENTS A1 A2 A1 A15 A5 A4 A3 A2 A3 A7 3 a2 b2 A8 A4 A6 b A7 A19 A8 A9 A6 A9 A10 A13 A17 1 A5 A12 A14 5 Cover A11 A10 A11 B2 A15 B4 B1 A14 A16 Click! B7 B8 B6 B3 Click! a A18 A12 A13 B5 A19 A21 A21 = OFF A20 A20 = ON (NORMAL) A18 D2 A17 N3 N3 b1 N3 N3 N2 N2 N1 N1 = ON (FAST) N2 N1 N2 N1 D1 Power on before play. Adjust speed settings for best performance. 4 Load stands with additional vehicles. C1 N1 N1 N3 Easy to N2 N3 C2 2 Change lanes and launch again! Race along the inside lane! connect! N2 E L2 R2 F4 F4 E 10 F1 F1
10
10 15
15 L1 R1 10
17 B4 B5 B7 20 B1 B2 B3 19 18 22 21 1 24
24 22 25 2 23 26
24 3 5 11 5 WARNING: 5 4 11 CHOKING HAZARD – Small parts. 12 B6 B8 7 Not for children under 3 years. 6 8 9
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
One vehicle included. Others shown sold separately, subject to availability. Not for use with some Cars vehicles. FCW02 - 0970G3 © Disney/Pixar www.disney.com/cars service.mattel.com 1101522447 - DOM 6 7 8 1
6 of 8 page 7 of 8 page 8 of 8 page 1 of 8 page
1 APPLY LABELS 2 BATTERY INSTALLATION 3 ASSEMBLY (CONTD.)
• Requires 4 "D" size (LR20) alkaline batteries (not included). HELPFUL HINT: Apply labels before assembly by numbers as indicated. a b c a b B6 • Unscrew the battery cover with a Phillips head screwdriver (not included). 2 6 • Install 4 "D" size (LR20) alkaline batteries (not included) in the orientation (+/-) shown. • Replace battery cover and tighten screws. B7 B5 1 2 3 4 5 6 7 8 • For longer life use alkaline batteries. B8 • Replace batteries when booster can no longer propel car through the track set. A9 • Dispose of batteries safely. A8 • When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove BACK VIEW B4 and re-install the batteries. C1 Click!
B3 18 23 • The supply terminals are not to be short-circuited. BATTERY SAFETY INFORMATION A14 • Dispose of battery(ies) safely. A19 In exceptional circumstances batteries may leak fluids that can cause a chemical a b c B2 burn injury or ruin your product. To avoid battery leakage: • Do not dispose of this product in a fire. The batteries inside may explode or leak. 3 9 10 18 19 10 12 13 • Non-rechargeable batteries are not to be recharged. A18 B1 • Rechargeable batteries are to be removed from the product before being charged. A18 B3 A20 A20 A3 • Rechargeable batteries are only to be charged under adult supervision. A21 A21 A2 • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Protect the environment by not disposing of this product or any A9 A1 A10 • Do not mix old and new batteries. batteries with household waste. This symbol indicates that this A8 A8 product shall not be treated as household waste. Check your local 7 A2 • Only batteries of the same or equivalent type as recommended are to be used. A16 • Batteries are to be inserted with the correct polarity. authority for recycling advice and facilities. A17 • Exhausted batteries are to be removed from the product. 14 11 24 15 A17 A6 A16 FOR PRODUCT SOLD IN USA A15 A1 A1 A15 A19 This device complies with Part 15 of the FCC Rules. A17 A16 A18 C2 Operation is subject to the following two conditions: 4 A7 A7 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is A19 C2 15 16 24 17 11 encouraged to try to correct the interference by one or more of the following measures: A19 A20 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. A17 A18 A4 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. A3 • Consult the dealer or an experienced radio/TV technician for help. A16 A16 NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. a A21 8 b E
Refer to letters shown for easy assembly. 3 ASSEMBLY R2 R2 L2 L2 22 26 11 13 21 22 E
A11 1 A10 A8 A7 A8 A7 5 R1 R1 L1 L1 A6 A6 A7 A19 A8 A9 A10 A10 A9 A11 A11 A5 20 A12 24 11 25 16 10 15 A5 A12 c A4 A4 A16 A13 A14 A13 A15 A14 A14 A13 A14 A1 A15 A3 A3 A2 A2
2 3 4 5
2 of 8 page 3 of 8 page 4 of 8 page 5 of 8 page