DOCSLIB.ORG

Brazetec Products Umicore Brazing Technology

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Brazetec Products Umicore Brazing Technology 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:29 Seite 1 BrazeTec Products Umicore Brazing Technology Brazing Alloys & Brazing Fluxes Brazing Pastes Soft Solders & Soft Solder Fluxes 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:30 Seite 3 BrazeTec Brazing Alloys & Brazing Fluxes A Brazing Alloys, Cadmium Free Page 9 B CoMet – Flux Coated Brazing Rods, Cadmium Free Page 9 C Brazing Alloys for Copper and Copper Based Materials Page 10 D Brazing Alloys for Special Applications Page 10 E Sandwich Alloys for the Brazing of Tungsten Carbides Page 11 F Brazing Alloys for the Brazing of Tungsten Carbides Page 11 G Active Brazing Alloys for the Brazing of Ceramic Materials Page 12 H Active Brazing Pastes Page 12 I Brazing Fluxes Page 13 J Anti Flux Page 13 Overview of Standards Page 14 BrazeTec Brazing Pastes K Copper Based Brazing Pastes Page 17 L Nickel Based Brazing Pastes Page 17 M Silver Based Brazing Pastes Page 17 BrazeTec Soft Solders & Soft Soldering Fluxes N Soft Soldering Pastes for Plumbing Technology Page 18 O Soft Solders for Plumbing Technology Page 18 P Soldamoll Special-Soft Solders Page 19 Q Soldaflux Soft Solder Fluxes Page 19 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:30 Seite 2 BrazeTec production facilities Umicore location Brazil Germany China Umicore Brasil Ltda. Umicore AG & Co. KG Umicore Technical Materials BrazeTec Division Technical Materials Suzhou Co. Ltd. Business Line BrazeTec Rua Barao do Rio Branco 368 #508-2, Zhujiang Road, SND Caixa Postal 101 Rodenbacher Chaussee 4 Suzhou Province 07042-010 Guarulhos-São Paulo 63457 Hanau 215011 P.R. China Phone: +55 (11) 2421-1371 Phone: +49 (6181) 59-02 Phone: +86 (512) 6667-0800 Fax: +55 (11) 2421-1180 Fax: +49 (6181) 59-31 07 Fax: +86 (512) 6667-3230 [email protected] [email protected] [email protected] Additional production facility: Italy Coimpa Industrial Ltda. Italbras S.p.A. Avenida Rodrigo Otávio, 3047 Strada del Balsego, 6 69077-000 - Manaus - AM 36100 Vicenza (VI) Phone: +55 (92) 2121-7500 Phone: +39 (0444) 3475-00 Fax: +55 (92) 2121-7522 Fax: +39 (0444) 3475-01 [email protected] 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:30 Seite 3 Page 4/5 About us Page 6/7 Service & Know-how Page 8 Available Forms Page 9 –15 Brazing Alloys & Brazing Fluxes Page 16 –17 Brazing Pastes Page 18 –19 Soft Solders & Soft Solder Fluxes 3 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:30 Seite 4 Convincing Through Performance – for generations – BrazeTec In line with our claim “Brazing is BrazeTec”, we offer solutions, which set standards, products, and technologies that set the trend and a service that always puts the needs of our customer first. Re-integration of the Umicore, Belgium BrazeTec Business Unit acquires Degussa’s into Umicore’s core Precious Metals business Business unit Foundation of group Opening of Degussa Brazing BrazeTec GmbH 2006 Precursors the Brazing Technology 2003 of the brazing Center 2001 Foundation Foundation business unit of Umicore 1970 of Degussa 1930s 1951 1873 1906 4 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:30 Seite 5 German Institute for German Technical and TQM & Certified to Certified to Certified to Quality Assurance and Scientific Association for Responsible Care DIN EN ISO 9001:2008 DIN EN ISO 9001:2008 DIN EN ISO 50001:2011 Labeling Gas and Water Umicore – BrazeTec the Umicore Group, we offer you the additional facilities of precious Your Partner in Brazing Technology metal recycling, precious metal management and other Umicore services, to meet your requirements. BrazeTec is a world leader in the manufacture and supply of high quality brazing materials, brazing paste and flux. Originally part A stable and unprecedented product quality is the foundation of our of Degussa, today BrazeTec is part of the multinational materials long-term and successful partnerships with customers. Continuous technology group Umicore, which focuses on application areas where improvement processes ensure that our employees and products it is foremost for its know how in materials science, chemistry and meet the growing demands and thanks to our team of experts at metallurgy. This union offers BrazeTec an optimum environment for the Brazing Center we can, together with you, develop customized stability and innovation. solutions, optimize your production processes and adapt our extensive range of products to suit your particular needs. With production sites in Europe, America and Asia, as well as a worldwide sales and logistics network, we are here for you when it comes to joining metals permanently and reliably. Our customer service naturally meets all requirements on export documents, REACH requirements and safety data sheets in local languages for customers in all parts of the world. Through our integration into ... since 1930 5 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:30 Seite 6 Flame brazing Induction brazing Viscosity measurement The Knowledge Center and the Basis of Every Innovation – our Brazing Center Our Brazing Center has offered technical services to our customers around the world for over 60 years. Service & Know-how Brazing Center Service Brazing Center Brazing Equipment Brazing Center Analysis Application technology consultation Oxyacetylene burner Metallographic analysis Brazing trials on production parts Medium and high frequency Optical and electron microscopy induction facility Brazing seminars and training courses Thermic analysis Inert gas furnace Partnership project work Elementary analysis Muffle furnace Determination of mechanical Vacuum furnace parameters (hardness, strength) 6 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:30 Seite 7 With our Brazing Center in Hanau, Germany, Brazing Seminars and we have for over 60 years maintained a Training Courses unique and first-class center for technical With the aid of conferences, meetings and advice and project work with our customers, seminars of various organisers, our personnel and for the development of new, superior at the Brazing Center discuss, expand, and metal and chemical products, which meet share their knowledge. Specifically it is the demanding requirements of our possible to support our customers by means customers in connection technology. of brazing seminars and training courses Application Technology Consultation conducted on their own premises, as well Our experienced personnel in the Brazing as personalised events locally. Center will assist you with regard to the Web seminars on current brazing topics optimum product selection for your brazing also offer our customers the opportunity to process, discuss with you the correct design acquire technical brazing knowledge online. of your components for brazing and make recommendations for suitable brazing tech- Partnership Project Work niques, including the required parameters. In partnership with our customers, we Brazing Trials address complex and long-term brazing topics in the form of project work. These Thanks to our wide range of brazing equip- include the optimisation of existing ment, we are able to carry out brazing trials processes or the development of new pro- directly on prototype and production parts. duction and brazing processes to meet indi- Using state of the art analytical methods, vidual adaptation of our products as well as we can assess the quality of the brazed joints joint research and development work. and subsequently evaluate the trials. The process parameters determined in this way enable the specification of the production requirements for our customers. Vacuum furnace 7 02610_BR_BrazeTec_Lieferprogramm_EN_2015_MON2.qxp_210x279 07.05.15 12:31 Seite 8 BrazeTec Products The most widely used forms are: Wire Flux coated brazing rods Information about our products and equip- ment as well as our systems and procedures is Ø: 1.5 / 2.0 / 3.0 mm Core-Ø: 1.5 and 2.0 mm based on comprehensive research and applica- in coils or on spools Length: 500 mm Flux coating: tion technological experience. We communi- standard, thin or extra-thin cate these results, but take no liability for respective single contracts that are exceeding thereof. We reserve the right to make techni- Rods Flux cal changes in the process of product develop- ment in spoken and written terms to the best Ø: 1.5 / 2.0 / 3.0 mm Quantity: Length: 500 mm 0.1/0.5/1/10/40 kg of our knowledge. Furthermore, our applica- tion technology services are available at your convenience for more detailed consultation such as the involvement in solving manufac- turing and application technology problems. Strip Brazing Paste This does not however, release the user from Thickness: Quantity: 1/3/5/10/25 kg their own responsibility for checking the input 0.1 / 0.2 / 0.25 / 0.3 / 0.4 mm Custom cartridges available and recommendations we give for their own Width: on demand use prior to using that input or recommenda- 1.5 to 70 mm tion. This is especially applicable for foreign deliveries. This also applies to the trade mark rights of third parties, for applications and Sandwich Alloy/Trifoil Preforms procedures that are not specifically given by Wire: us. In the event of damage or loss our liability Thickness: Rings, segments, multiform parts 0.25 / 0.3 / 0.4 mm Strip / Sandwich Alloy: is limited to indemnification of the same admeasurement as is foreseen in our general Width: Segments, stamped and multi- 1.5 to 70 mm form parts, platelets, washers,
Load more

Recommended publications
  • OEM Truck Maker Is First to Use Brazed Copper-Brass URAL Installs Cuprobraze Radiator-And-CAC Package in World-Class Trucks
    CuproBraze® 36 EXECUTIVEReport OEM Truck Maker Is First to Use Brazed Copper-Brass URAL Installs CuproBraze Radiator-and-CAC Package in World-Class Trucks oday,URAL is unrivaled in currently meet the Euro II regulations; mean- the design and manufacture while,URAL management is looking forward to of rugged 4 × 4,6 × 6 and 8 × meeting the next stages of lower emissions stan- 8 truck models.As a leading dards.New engines and cooling systems are manufacturer of off-road being developed for highway and off-road trucks in Russia,it enjoys a trucks to meet these new requirements as well. market share of more than 70 According to Alexander Vedernikov,Technical percent for full-drive trucks; Development Manager,URAL engineers envision and 20 percent of that coun- all future designs of URAL trucks with CuproBraze Ttry’s total truck market.Additionally,URAL advanced heat exchanger technology. exports about 25 percent of its production,and it plans to enter the heavy-duty on-highway Passability, Reliability, Versatility truck market as well. High passability is a trademark of URAL trucks and a part of the company’s heritage.“Passability” First OEM to Adopt CuproBraze could be defined in terms of the truck or the URAL passed many milestones in recent years terrain.Given Russia’s vast territories and harsh on its way to becoming a world-class truck climate,the production of off-road trucks that maker.One important achievement this year can drive though extremely rough terrain is cru- was becoming the first OEM truck maker in the cial to its economy.With powerful engines and world to use CuproBraze® radiators.It now uses special driving axles,URAL trucks are engi- CuproBraze products made by SHAAZ in all of neered to withstand the most challenging off- its trucks.
    [Show full text]
  • Copper Alloys
    THE COPPER ADVANTAGE A Guide to Working With Copper and Copper Alloys www.antimicrobialcopper.com CONTENTS I. Introduction ............................. 3 PREFACE Conductivity .....................................4 Strength ..........................................4 The information in this guide includes an overview of the well- Formability ......................................4 known physical, mechanical and chemical properties of copper, Joining ...........................................4 as well as more recent scientific findings that show copper has Corrosion ........................................4 an intrinsic antimicrobial property. Working and finishing Copper is Antimicrobial ....................... 4 techniques, alloy families, coloration and other attributes are addressed, illustrating that copper and its alloys are so Color ..............................................5 adaptable that they can be used in a multitude of applications Copper Alloy Families .......................... 5 in almost every industry, from door handles to electrical circuitry to heat exchangers. II. Physical Properties ..................... 8 Copper’s malleability, machinability and conductivity have Properties ....................................... 8 made it a longtime favorite metal of manufacturers and Electrical & Thermal Conductivity ........... 8 engineers, but it is its antimicrobial property that will extend that popularity into the future. This guide describes that property and illustrates how it can benefit everything from III. Mechanical
    [Show full text]
  • Soldering and Brazing of Copper and Copper Alloys Contents
    Soldering and brazing of copper and copper alloys Contents 1. Introduction 4 5. Quality assurance 47 2. Material engineering fundamentals 9 6. Case studies 48 2.1. Fundamentals of copper and copper alloys 9 6.1 Hot-air solder levelling of printed circuit boards 48 2.2 Filler materials 10 6.2 Strip tinning 49 2.2.1 Soft solder 11 6.3 Fabricating heat exchangers from copper 49 2.2.2 Brazing filler metals 13 6.4 Manufacture of compact high-performance 2.3 Soldering or brazing pure copper 16 radiators from copper 49 2.4 Soldering / brazing copper alloys 18 2.4.1 Low-alloyed copper alloys 18 7. Terminology 50 2.4.2. High-alloyed copper alloys 22 8. Appendix 51 3. Design suitability for soldering/brazing 26 References 57 4. Soldering and brazing methods 29 Index of figures 58 4.1 The soldering/brazing principle 29 4.2 Surface preparation 30 Index of tables 59 4.3 Surface activation 32 4.3.1 Fluxes 33 4.3.2 Protective atmosphere / Shielding gases 35 4.4 Applying the solder or brazing filler metal 36 4.5. Soldering and brazing techniques 37 4.5.1 Soldering with soldering iron 38 4.5.2 Dip bath soldering or brazing 38 4.5.3 Flame soldering or brazing 40 4.5.4 Furnace soldering or brazing 40 4.5.5 Electric resistance soldering or brazing 43 4.5.6 Induction soldering or brazing 44 4.5.7 Electron beam brazing 45 4.5.8 Arc brazing 45 4.5.9 Laser beam soldering or brazing 46 2 | KUPFERINSTITUT.DE List of abbreviations Abbreviations Nd:YAG laser Neodymium-doped yttrium aluminium garnet laser SMD Surface-mounted device PVD Physical vapour deposition RoHS
    [Show full text]
  • Comparative Study and Performance Analysis of Copper, Aluminium and Cuprobraze Radiators Using Flow Simulation Software
    International Journal of Engineering and Techniques - Volume 3 Issue 5, Sep - Oct 2017 RESEARCH ARTICLE OPEN ACCESS Comparative Study and Performance Analysis of Copper, Aluminium and Cuprobraze Radiators Using Flow Simulation Software R.K Jaya kumar 1, T.Ashokkumar 2 1 & 2Assistant Professors, Department of Aeronautical Engineering, Sri Ramakrishna Engineering College, Coimbatore 22, India [email protected] Abstract Cooling system in an automotive vehicle plays an important role in the engine performance. It dissipates excessive heat and maintains the performance of an engine at an optimum level. Size of the radiator mainly depends on heat load and availability of space. In this paper, an attempt has been made to examine the performance of radiators namely copper, aluminium and Cuprobraze employed in various commercial vehicles. Specifications of copper radiator and validation of numerical analysis were identified. After modifying the material properties of a radiator, performance analysis have been carried out using fluid flow software, which is fully integrated in solidworks for computing fluid flows. The result obtained from the analysis is commendable and this method may be taken as an effective approach for the prediction of heat transfer in radiators. Though aluminium has noted to perform better than copper and Cuprobraze, but it has limitations such as irreparability, non recyclability. This paper proposes an alternative solution for existing aluminium radiator with suitable cuprobraze radiator to provide required cooling
    [Show full text]
  • Technical Innovations a Clock Speed of 20 Mhz
    Operator panels take all you’ve got In the world of equipment control, tasks are becom- ing ever more complex, which has a lot to do with the growing popularity of CAN bus in mobile con- struction, agricultural, and industrial equipment. With transmission speeds from 100 kB/s to 1 MB/s with high data integrity, CAN bus allows easy control and monitor of machines, equipment racks, and at- tached ancillary equipment. To enable vehicle operators to see a clear display of the data transmitted on the bus, Wachendorff has developed the OPUS A1 and A2 operator panels. Using a TFT (thin fi lm transistor) display and function keys, all the relevant data for the machine compo- Compact operator panels from Wachendorff work Easy to operate with a multitude of possible applications, with CAN bus to allow agricultural modern tractors and other off-highway for fast programming, equipment rely on rugged operator panels. production data acquisition, and data processing is via a 16-bit Siemens processor with visualization of data. technical innovations a clock speed of 20 MHz. Internal memory is available (All images courtesy of Wachendorff.) in the form of 1 MB fl ash for BIOS, 4 MB fl ash for project data, and 512 kB SRAM and 32 kB EEPROM. The portable SD (secure digital) memory cards elim- inate the need to write to the operator panel’s ROM chip via software and a PC, as the update can be car- ried out in the fi eld. The capacity of the memory card depends on the user profi le, including GPS position data, operating time, and parameters specifi c to the unit such as sensor data, which all can be stored on the card at intervals defi ned by the user.
    [Show full text]
  • Brazing Filler Metals
    This is a repository copy of Brazing filler metals. White Rose Research Online URL for this paper: http://eprints.whiterose.ac.uk/147639/ Version: Published Version Article: Way, M., Willingham, J. and Goodall, R. orcid.org/0000-0003-0720-9694 (2019) Brazing filler metals. International Materials Reviews. ISSN 0950-6608 https://doi.org/10.1080/09506608.2019.1613311 Reuse This article is distributed under the terms of the Creative Commons Attribution (CC BY) licence. This licence allows you to distribute, remix, tweak, and build upon the work, even commercially, as long as you credit the authors for the original work. More information and the full terms of the licence here: https://creativecommons.org/licenses/ Takedown If you consider content in White Rose Research Online to be in breach of UK law, please notify us by emailing [email protected] including the URL of the record and the reason for the withdrawal request. [email protected] https://eprints.whiterose.ac.uk/ International Materials Reviews ISSN: 0950-6608 (Print) 1743-2804 (Online) Journal homepage: https://www.tandfonline.com/loi/yimr20 Brazing filler metals Matthew Way, Jack Willingham & Russell Goodall To cite this article: Matthew Way, Jack Willingham & Russell Goodall (2019): Brazing filler metals, International Materials Reviews, DOI: 10.1080/09506608.2019.1613311 To link to this article: https://doi.org/10.1080/09506608.2019.1613311 © 2019 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group Published online: 14 May 2019. Submit
    [Show full text]
  • 2019 Vintage Air Catalog.Pdf
    The Most TrUsted Name In Performance Air Conditioning ® 2 0 19 43 YEARS InMotion THEFour Decades COOL Of Leadership LIFE ® t Vintage Air, We haVe Worked eVerY daY since 1976 With the same commitment to oUr manY cUstomers that We haVe serVed throUgh- AoUt the World for the last 43 Years. It is VerY reWarding for me to knoW that most of mY friends todaY are also cUstomers, and that theY belong to an eVer-eVolVing commUnitY. The cars haVe become more sophisticated and the aVerage bUild qUalitY has become simplY astoUnding. At the same time, manY neW enthUsiasts, some With less “greY beard” knoWledge, haVe joined oUr ranks and Want to learn all theY can to participate in this great aUtomotiVe hobbY. The air conditioning sYstems and ancillarY prodUcts that We bUild are eVolVing as Well. OUr SUreFit TM sYstems are aVailable for a groWing VarietY of makes and models of cars, making installation easier than eVer before. The principle benefit of the SUreFit TM kit is that the compo- nents are VerY specific to the Vehicle, so With oUr comprehensiVe instrUction manUals We haVe VirtUallY eliminated the most common mistakes made in manY air conditioning installations. We are alWaYs eager to complY With goVernment oVersight of oUr indUstrY, and eVen When We maY not necessarilY agree With each neW laW, We Understand that it is oUr responsibilitY to complY. AccordinglY, We haVe alWaYs been proactiVe in addressing these issUes and bringing them to the market earlY. We implemented the Use of HFC-134a refrigerant in oUr sYstems before anY air conditioning sYstems manUfactUrer in the United States, inclUding the OEM car bUilders.
    [Show full text]
  • Welded Tubes, Aluminium, Copper & Brass for Radiator Systems
    Welded Tubes, Aluminium, Copper & Brass for Radiator Systems www.enfi eldtubes.com Enfi eld Tubes About Us Enfi eld Tubes is a leading international supplier of high frequency Service Features welded brass solder coated tube and cuprobraze for high We are committed to the delivery of excellence and offer a wide performance radiator applications. range of quality services that include: We also supply copper, aluminium, brass and cupro-nickel products – Stockholding facilities, inventory control and material in all forms, for manufacture of heating and cooling cores and other scheduling helping you to increase available space and reduce heat transfer products. your stockholding overheads. Our extensive experience and ability to develop innovative services – Quick and effi cient deliveries. have allowed us to meet the growing demand for welded tubes, brazing products and cost effective alternative alloys. We provide a – Processing of coil, sheet and tube. comprehensive range of lighter weight and corrosion resistant alloys to meet customer needs, guaranteeing the highest quality products. – Our experienced supply chain management takes the strain out of dealing with mills lengthy lead times and minimum order Products & Services quantities. We stock an unrivalled range of coil, sheet, welded and bespoke tube in a variety of alloys and grades and are committed to providing – Our dedicated and experienced sales team can help you a fl exible and reliable service tailored to meet your needs. Our develop new products and ideas. specialist in-house facilities allow us to shear coil and manufacture welded tubes to required sizes. This enables us to offer a versatile service to customers whether they require a couple of lengths of welded tube for a prototype or 10 pallets of sheet packed ready for same day despatch.
    [Show full text]
  • Yakut Medical Journal» Is Included in the Approved by Chuvashova I.I., the Higher Attestation Commission of the Russian Kononova S.L
    ISSN 1813-1905 (print) ISSN 2312-1017 (online) 4(68) `2019 ЯКУТСКИЙ МЕДИЦИНСКИЙ ЖУРНАЛ The founder The Yakut Science Centre of Complex Medical Problems YAKUT Editor- in- chief Romanova A.N., MD MEDICAL Editorial Board: Deputy Chief Editor and Executive secretary Nikolaev V.P., MD JOURNAL Scientific editor Platonov F.A. MD SCIENTIFIC - PRACTICAL JOURNAL Editorial Council: OF THE YAKUT SCIENCE CENTRE OF COMPLEX Aftanas L.I., MD, Professor, acad. RAMS MEDICAL PROBLEMS (Novosibirsk) Voevoda M.I., MD, Professor, Corresponding Member RAMS (Novosibirsk) Ivanov P.M., MD, Professor (Yakutsk) Quarterly Kryubezi Eric, MD, Professor (France) Maksimova N.R., MD (Yakutsk) Nelson Debora, MD, Professor (USA) Registered by the Office of the Federal Service on Nikitin Yu.P., MD, Professor, Acad. RAMS supervision in the field of communications, information (Novosibirsk) technologies and mass communications in the Republic Odland John, MD, Professor (Norway) Sakha (Yakutia) December 13/2016 Puzyrev V.P., MD, Professor, Acad. RAMS (Tomsk) Reutio Arya, MD, PhD, Professor (Finland) Sleptsova S.S., MD, Professor (Yakutsk) Registration number PI No.ТU 14-00475 Fedorova S.A., Doctor of Biology (Yakutsk) Husebek Anne, MD, Professor (Norway) Subscription index: 78781 Khusnutdinova E.K., Doctor of Biology, Professor Free price (Ufa) Chasnyk V.G., MD, Professor (Saint Petersburg) Editors: «Yakut Medical Journal» is included in the approved by Chuvashova I.I., the Higher Attestation Commission of the Russian Kononova S.l. Federation List of leading peer-reviewed scientific Semenova T.F. (English) journals and publications, in which the main scientific results of dissertations for the acquisition of scientific Computer design degrees of Doctor and Candidate of science on Sannikova M.I.
    [Show full text]
  • Definition of Cuprobraze
    WHAT IS CUPROBRAZE®? Introduction CuproBraze® is an official trademark registered by International Copper Association. Under the CuproBraze ™ brand, a heat exchanger manufacturing technology is commercialized. CuproBraze® heat exchangers are made using special anneal-resistant alloys of copper and brass. Tubes are fabricated from brass strip and coated with a brazing filler material. The copper fins, coated tubes, headers and side supports made of brass are fitted together into a core assembly, which is then brazed in a furnace. The fin copper, tube brass and brazing alloy used in the technology, have been patented by Aurubis (www.aurubis.com). Consequently, consult the owners of the intellectual property rights in case of doubts on infringement of the rights. To be on the safe side both technically and legally, it is advised to follow the guidelines of CuproBraze® Brazing Handbook, Edition #10 or later version (free download on www.cuprobraze.com). CuproBraze® heat exchangers are today used mainly, but not exclusively, in heavy duty off-road vehicles, like mining vehicles, agricultural vehicles, construction equipment, military vehicles and in locomotives and stationary generators, as well as in heavy-duty highway trucks and buses and in some lighter vehicles. History The CuproBraze® mark has been in use since 1999 with many small, mid-size and high- volume production facilities are making CuproBraze® heat exchangers for OEMs and the aftermarket in the years since. So called “one-shot” brazing entered production scale in 2008. During that time CuproBraze® has been promoted through advertising, press, exhibitions, websites and other collateral materials. The CuproBraze Executive Report issue Number 61 on twelve CuproBraze milestones titled “CuproBraze® Secrets to Success” http://cuprobraze.com/wp-content/uploads/2015/03/0318-ICA-ER61- Milestones.pdf indicates evidence of historical activities related to the CuproBraze® mark.
    [Show full text]
  • Rolled Products Facts & Figures Aurubis Rolled Products
    Rolled Products Facts & Figures Aurubis Rolled Products > 200,000 • metric tons of foil, strip, sheet and plate are produced worldwide annually by Aurubis. > 98 % • of global strip demand is covered by Aurubis’ alloy portfolio. 50 • metric tons is the size of the biggest copper and brass coil in the world, produced by Aurubis. 4 • rolling mills in Europe and the US. 4 • tin-plating lines in Europe and the US. Min. 0.025 mm to max. 200 mm extensive thickness range – from foil to plate. Pori (Finland) Emmerich (Germany) (Germany) Fehrbellin Seoul (Korea) Västerås (Sweden) Tokyo (Japan) Finspång (Sweden) Hamburg (Germany) Group headquarters (Taiwan) St. Petersburg (Russia) Taipei Chicago (US) Dolný Kubín (Slovakia) Shanghai (China) Buffalo (US) Avellino (Italy) Zutphen (Netherlands) Lünen (Germany) Mortara (Italy) Pirdop (Bulgaria) Hong Kong (China) Röthenbach (Germany) Brussels (Belgium) Yverdon-les-Bains (Switzerland) Istanbul (Turkey) Olen (Belgium) Lyon (France) Stolberg (Germany) Prague (Czech Republic) Barcelona (Spain) Birmingham (United Kingdom) Dubai (UAE) Strass (Germany) Bangkok (Thailand) Ho Chi Minh City (Vietnam) Singapore (Singapore) Contents THE GROUP Aurubis Group 4 Sales and Aurubis Rolled Products 5 Raw materials Products Slitting Centers distribution Cathodes Continuous Wire rod THE PRODUCTS Offering the broadest range 6 Concentrates The copper is processed cast shapes Service Centers An international Alloys 8 and recycling into products. located near sales and Technology with outstanding possibilities 10 materials are the Some products are our customers distribution raw materials already the result of cut strips to network Electrical and electronics industries 11 Strips/ Specialty rod/ Precious Rolled from which copper copper production. the desired markets our Tin-plated solutions 12 is produced.
    [Show full text]
  • Off-Road Vehicle 1 Off-Road Vehicle
    Off-road vehicle 1 Off-road vehicle An off-road vehicle is considered to be any type of vehicle which is capable of driving on and off paved or gravel surface. It is generally characterized by having large tires with deep, open treads, a flexible suspension, or even caterpillar tracks.[citation needed] Other vehicles that do not travel public streets or highways are generally termed off-highway vehicles, including tractors, forklifts, cranes, backhoes, bulldozers, and golf carts.[citation needed] Off-road vehicles have an enthusiastic following because of their many uses and versatility. Several types of motorsports involve racing off-road vehicles. The three largest "4-wheel vehicle" off-road types of Mercedes-Benz Unimog in the Dunes of Erg Chebbi in Morocco. Note the high ground competitions are Rally, Desert Racing, and Rockcrawling.[citation clearance due to Portal gear axles needed] The three largest types of All Terrain Vehicle (ATV) / Motorcycle competitions are Motocross, Enduro, and also Desert Racing like Dakar Rallye and Baja 1000.[citation needed] The most common use of these vehicles is for sight seeing in areas distant from pavement. The use of higher clearance and higher traction vehicles enables access on trails and forest roads that have rough and low traction surfaces. History One of the first modified off-road vehicles was the Kégresse track, a conversion undertaken first by Adolphe Kégresse, who designed the original while working for Czar Nicholas II of Russia between 1906 and 1916.[1] The system uses an unusual caterpillar track which has a flexible belt rather than interlocking metal segments.
    [Show full text]