Welded Tubes, Aluminium, Copper & Brass for Radiator Systems

Total Page:16

File Type:pdf, Size:1020Kb

Welded Tubes, Aluminium, Copper & Brass for Radiator Systems Welded Tubes, Aluminium, Copper & Brass for Radiator Systems www.enfi eldtubes.com Enfi eld Tubes About Us Enfi eld Tubes is a leading international supplier of high frequency Service Features welded brass solder coated tube and cuprobraze for high We are committed to the delivery of excellence and offer a wide performance radiator applications. range of quality services that include: We also supply copper, aluminium, brass and cupro-nickel products – Stockholding facilities, inventory control and material in all forms, for manufacture of heating and cooling cores and other scheduling helping you to increase available space and reduce heat transfer products. your stockholding overheads. Our extensive experience and ability to develop innovative services – Quick and effi cient deliveries. have allowed us to meet the growing demand for welded tubes, brazing products and cost effective alternative alloys. We provide a – Processing of coil, sheet and tube. comprehensive range of lighter weight and corrosion resistant alloys to meet customer needs, guaranteeing the highest quality products. – Our experienced supply chain management takes the strain out of dealing with mills lengthy lead times and minimum order Products & Services quantities. We stock an unrivalled range of coil, sheet, welded and bespoke tube in a variety of alloys and grades and are committed to providing – Our dedicated and experienced sales team can help you a fl exible and reliable service tailored to meet your needs. Our develop new products and ideas. specialist in-house facilities allow us to shear coil and manufacture welded tubes to required sizes. This enables us to offer a versatile service to customers whether they require a couple of lengths of welded tube for a prototype or 10 pallets of sheet packed ready for same day despatch. Our renowned reputation is for providing exceptional products and services. Products Enfi eld Tubes offers customers a full range of products for radiator, heat exchange and cooling systems from a single source; we work in partnership with our customers to provide and supply products to a unique specifi cation, on time and to budget. As a trustworthy trading partner, all our material is fully traceable to approved and highly reputable sources guaranteeing total product security. Through continuous improvement we are committed to providing outstanding operational excellence and have a registered Quality Management System that is approved to ISO 9001. www.enfi eldtubes.com Welded tubes Cuprobraze Welded Tubes Please note the list below gives an indication of the range of Enfi eld Tubes manufactures fl at-oval Cuprobraze welded tubes. tubes for which tooling is currently available. We are able to Cuprobraze is a technology that uses both brass tubes and copper undertake bespoke orders, please contact Claire Lucas or fi ns. John Perry on 01900 601166. Cuprobraze welded tubes are used for manufacturing a new Cuprobraze Welded Tubes Dimension generation of high-performance heat exchangers providing Major axis (A) 12.5mm - 20.0mm automative manufacturers with a way to produce heat exchangers Minor axis (B) 1.9mm - 4.2mm of high strength and durability. End diameter 1.8mm - 4.0mm Wall thickness 0.15mm - 0.40mm Brass Welded Tubes Brass with its superior heat conductivity and durability continues to be Brass Welded Tubes Dimension the material of choice when heavy-duty performance is demanded. Major axis (A) 12.2mm - 20.0mm Flat-oval solder-coated brass tube is made from corrosion-resistant Minor axis (B) 1.9mm - 4.2mm arsenical 70/30 brass with 25/75 solder (tin/lead). End diameter 1.8mm - 4.0mm Wall thickness 0.12mm - 0.40mm Enfi eld Tubes processing capabilities include regular or plain brass, as well as dimpled profi le tubes for low-fl ow applications. We offer a cut-to-length service enabling customers to buy fi nished components and eliminate in-house process scrap. Lockseam Welded Tube When it’s a lockseam it’s one When it’s an Enfi eld Welded of the rest... Tube... it’s the best. ✗ Re-work costs ✓ High strength ✗ Seam leaks ✓ Leak free ✗ Process scrap ✓ Easy core assembly ✗ Labour intensive ✓ Faster core production ✗ Wasted metal ✓ Lower labour costs ✗ Tube to header leaks ✓ Improved productivity ✓ More radiators per tonne of tube ✓ Optimum tube to header fi t www.enfi eldtubes.com Unclad Aluminium Unclad Aluminium We have a wide range of alloys to satisfy the increasing demand for ‘ We have been using Enfi eld Tubes for over 20 specialised lightweight construction materials. Our rolled products years. The product is of a high quality but more help make cars lighter for increased fuel-effi ciency, offer corrosion importantly the staff are always supportive. resistance for greater durability in military applications, and give a high quality surface fi nish. We can supply unclad sheet and strip This is what we appreciate” in a variety of forms, dimensions (widths and thicknesses) and Caribbean Radiator Works tempers ranging from fully soft to fully hard, rolled or back-annealed. Saud Owner Unclad Aluminium Alloy Grades Temper Coil Dimensions Sheets Tubes We stock a range of non – Soft - O – Widths from 2mm up to We stock a variety of O/D from: clad aluminium, most – H/H - H14 610mm sheet sizes to suit your – 0.5mm up to 90mm common include: – Hard H24 – Thicknesses from requirements, sheets can Wall thicknesses to suit – 3003 Or to specifi ed customer 0.05mm up to 2mm also be cut to customer customer requirements. – 3903 requirements. – Coil sizes as required specifi cations. – 1050 – 8006 – 6082 Specialist alloys available on request. www.enfi eldtubes.com Clad Aluminium Clad Aluminium superiority, we continually develop and invest in our stock, plant and Enfi eld Tubes offers a range of brazed aluminium sheet and coil for equipment to secure a long-term and highly competitive future. vacuum brazing applications and controlled atmosphere brazing applications (CAB). Maximum fl exibility is produced by our versatile Enfi eld Tubes can shear widths in-house to specifi ed coil sizes, rolling equipment which is able to supply aluminium sheet to many cut blanks from sheet and manufacture bespoke tubes. We hold different tempers. Our experienced and dedicated sales team an unrivalled range of stock that ensures continuity of supply, high can help assist whether you require a high strength magnesium standards and superior products; our stockholding services are containing core alloy or a high purity magnesium free core alloy and tailored to maximise your organisational effi ciency reducing your our stockholding facility maintains your stock levels to your optimise overheads. your business. We have extensive experience in the design of cooling systems and Summary components for a varied and diverse customer base proving that Working in partnership with you to understand your unique our expertise and experience can provide solutions for your most requirements, our highly experienced team is committed to providing challenging thermal requirements. exceptional service and customer care enabling us to deliver quality products on time and to budget. To maintain our technological Clad Aluminium Alloy Grades Temper Coil Dimensions Sheets Clad Ratios We stock a range of core – Soft - O – Widths from 2mm up to We stock a variety of 5% to 15% clad, one side and clad alloys, most – H/H - H14 610mm sheet sizes to suit your or both, on either coil or common include: – Hard H24 – Thicknesses from requirements, sheets can sheet. – 3003 Or to specifi ed customer 0.05mm up to 2mm also be cut to customer – 4045 requirements. – Coil sizes as required specifi cations. – 4545 – 4343 Specialist alloys available on request. www.enfi eldtubes.com Other Products Copper, Brass & Cupro-Nickel Heat Exchange Tubes Enfi eld Tubes specialise in the development of high strength high We have the facility to manufacture tubes from a range of aluminium, corrosion resistant alloys to exacting standards that conform to our copper, brass and cupro-nickel alloys for the heat exchanger rigorous in-house testing. We stock an extensive range of grades industry. and tempers in coil, sheet and tube in a variety of forms to meet your specifi c requirements. Our skilled manufacturing processes With over a 100 years experience, we have a deep understanding supply superior products that make us a fi rst choice for your heat and knowledge of the customers and products has contributed to the and cooling systems. development of specialist tubes. Our stockholding facilities and inventory control means that We manufacture seamless drawn, fi nned and bi-metallic tube for your stock is held and monitored allowing you to reduce your use in refrigeration systems, oil coolers and condensers that are stockholding overhead. available in a range of specifi cations and bespoke sizes. Tubes can be manufactured to Naval Engineering Specifi cation NES 780 and to all other relevant International Standards, maintaining high quality components to exacting standards. Copper, Brass & Cupro-Nickel Alloy Grades Temper Coil Dimensions Sheets Heat Exchange Tubes We stock a range of – Soft VPN 45-65 (copper) – Widths from 2mm up to Common Standard Sizes: O/D from: alloys, most common – Half hard VPN 65-95 610mm – 2m x 1m – 0.5mm up to 90mm include: (copper) – Thicknesses from – 8’ x 4’ Wall thicknesses to suit – (CW004A)-C101 – Full hard VPN 95- 140 0.05mm up to 2mm – 4’ x 2’ customer requirements. – (CW204A)-C106 (copper) – Coil sizes as required – Thicknesses from – (CW508)-CZ108 – Soft VPN 80 max (brass) 0.5mm up to 6mm – (CW505)-CZ106 half hard VPN 80-105 Used for tube plates and – (CW707)-CZ126 (brass) baffl es, sheets can be cut – 70/30 (curpo-nickel) – Full hard VPN 130 min to customer requirements. – 90/10 (cupro-nickel) (brass) – Soft VPN 100 max (cupro-nickel) – Hard VPN 130 min (cupro-nickel) Or to specifi ed customer requirements.
Recommended publications
  • OEM Truck Maker Is First to Use Brazed Copper-Brass URAL Installs Cuprobraze Radiator-And-CAC Package in World-Class Trucks
    CuproBraze® 36 EXECUTIVEReport OEM Truck Maker Is First to Use Brazed Copper-Brass URAL Installs CuproBraze Radiator-and-CAC Package in World-Class Trucks oday,URAL is unrivaled in currently meet the Euro II regulations; mean- the design and manufacture while,URAL management is looking forward to of rugged 4 × 4,6 × 6 and 8 × meeting the next stages of lower emissions stan- 8 truck models.As a leading dards.New engines and cooling systems are manufacturer of off-road being developed for highway and off-road trucks in Russia,it enjoys a trucks to meet these new requirements as well. market share of more than 70 According to Alexander Vedernikov,Technical percent for full-drive trucks; Development Manager,URAL engineers envision and 20 percent of that coun- all future designs of URAL trucks with CuproBraze Ttry’s total truck market.Additionally,URAL advanced heat exchanger technology. exports about 25 percent of its production,and it plans to enter the heavy-duty on-highway Passability, Reliability, Versatility truck market as well. High passability is a trademark of URAL trucks and a part of the company’s heritage.“Passability” First OEM to Adopt CuproBraze could be defined in terms of the truck or the URAL passed many milestones in recent years terrain.Given Russia’s vast territories and harsh on its way to becoming a world-class truck climate,the production of off-road trucks that maker.One important achievement this year can drive though extremely rough terrain is cru- was becoming the first OEM truck maker in the cial to its economy.With powerful engines and world to use CuproBraze® radiators.It now uses special driving axles,URAL trucks are engi- CuproBraze products made by SHAAZ in all of neered to withstand the most challenging off- its trucks.
    [Show full text]
  • Copper Alloys
    THE COPPER ADVANTAGE A Guide to Working With Copper and Copper Alloys www.antimicrobialcopper.com CONTENTS I. Introduction ............................. 3 PREFACE Conductivity .....................................4 Strength ..........................................4 The information in this guide includes an overview of the well- Formability ......................................4 known physical, mechanical and chemical properties of copper, Joining ...........................................4 as well as more recent scientific findings that show copper has Corrosion ........................................4 an intrinsic antimicrobial property. Working and finishing Copper is Antimicrobial ....................... 4 techniques, alloy families, coloration and other attributes are addressed, illustrating that copper and its alloys are so Color ..............................................5 adaptable that they can be used in a multitude of applications Copper Alloy Families .......................... 5 in almost every industry, from door handles to electrical circuitry to heat exchangers. II. Physical Properties ..................... 8 Copper’s malleability, machinability and conductivity have Properties ....................................... 8 made it a longtime favorite metal of manufacturers and Electrical & Thermal Conductivity ........... 8 engineers, but it is its antimicrobial property that will extend that popularity into the future. This guide describes that property and illustrates how it can benefit everything from III. Mechanical
    [Show full text]
  • Soldering and Brazing of Copper and Copper Alloys Contents
    Soldering and brazing of copper and copper alloys Contents 1. Introduction 4 5. Quality assurance 47 2. Material engineering fundamentals 9 6. Case studies 48 2.1. Fundamentals of copper and copper alloys 9 6.1 Hot-air solder levelling of printed circuit boards 48 2.2 Filler materials 10 6.2 Strip tinning 49 2.2.1 Soft solder 11 6.3 Fabricating heat exchangers from copper 49 2.2.2 Brazing filler metals 13 6.4 Manufacture of compact high-performance 2.3 Soldering or brazing pure copper 16 radiators from copper 49 2.4 Soldering / brazing copper alloys 18 2.4.1 Low-alloyed copper alloys 18 7. Terminology 50 2.4.2. High-alloyed copper alloys 22 8. Appendix 51 3. Design suitability for soldering/brazing 26 References 57 4. Soldering and brazing methods 29 Index of figures 58 4.1 The soldering/brazing principle 29 4.2 Surface preparation 30 Index of tables 59 4.3 Surface activation 32 4.3.1 Fluxes 33 4.3.2 Protective atmosphere / Shielding gases 35 4.4 Applying the solder or brazing filler metal 36 4.5. Soldering and brazing techniques 37 4.5.1 Soldering with soldering iron 38 4.5.2 Dip bath soldering or brazing 38 4.5.3 Flame soldering or brazing 40 4.5.4 Furnace soldering or brazing 40 4.5.5 Electric resistance soldering or brazing 43 4.5.6 Induction soldering or brazing 44 4.5.7 Electron beam brazing 45 4.5.8 Arc brazing 45 4.5.9 Laser beam soldering or brazing 46 2 | KUPFERINSTITUT.DE List of abbreviations Abbreviations Nd:YAG laser Neodymium-doped yttrium aluminium garnet laser SMD Surface-mounted device PVD Physical vapour deposition RoHS
    [Show full text]
  • Comparative Study and Performance Analysis of Copper, Aluminium and Cuprobraze Radiators Using Flow Simulation Software
    International Journal of Engineering and Techniques - Volume 3 Issue 5, Sep - Oct 2017 RESEARCH ARTICLE OPEN ACCESS Comparative Study and Performance Analysis of Copper, Aluminium and Cuprobraze Radiators Using Flow Simulation Software R.K Jaya kumar 1, T.Ashokkumar 2 1 & 2Assistant Professors, Department of Aeronautical Engineering, Sri Ramakrishna Engineering College, Coimbatore 22, India [email protected] Abstract Cooling system in an automotive vehicle plays an important role in the engine performance. It dissipates excessive heat and maintains the performance of an engine at an optimum level. Size of the radiator mainly depends on heat load and availability of space. In this paper, an attempt has been made to examine the performance of radiators namely copper, aluminium and Cuprobraze employed in various commercial vehicles. Specifications of copper radiator and validation of numerical analysis were identified. After modifying the material properties of a radiator, performance analysis have been carried out using fluid flow software, which is fully integrated in solidworks for computing fluid flows. The result obtained from the analysis is commendable and this method may be taken as an effective approach for the prediction of heat transfer in radiators. Though aluminium has noted to perform better than copper and Cuprobraze, but it has limitations such as irreparability, non recyclability. This paper proposes an alternative solution for existing aluminium radiator with suitable cuprobraze radiator to provide required cooling
    [Show full text]
  • Technical Innovations a Clock Speed of 20 Mhz
    Operator panels take all you’ve got In the world of equipment control, tasks are becom- ing ever more complex, which has a lot to do with the growing popularity of CAN bus in mobile con- struction, agricultural, and industrial equipment. With transmission speeds from 100 kB/s to 1 MB/s with high data integrity, CAN bus allows easy control and monitor of machines, equipment racks, and at- tached ancillary equipment. To enable vehicle operators to see a clear display of the data transmitted on the bus, Wachendorff has developed the OPUS A1 and A2 operator panels. Using a TFT (thin fi lm transistor) display and function keys, all the relevant data for the machine compo- Compact operator panels from Wachendorff work Easy to operate with a multitude of possible applications, with CAN bus to allow agricultural modern tractors and other off-highway for fast programming, equipment rely on rugged operator panels. production data acquisition, and data processing is via a 16-bit Siemens processor with visualization of data. technical innovations a clock speed of 20 MHz. Internal memory is available (All images courtesy of Wachendorff.) in the form of 1 MB fl ash for BIOS, 4 MB fl ash for project data, and 512 kB SRAM and 32 kB EEPROM. The portable SD (secure digital) memory cards elim- inate the need to write to the operator panel’s ROM chip via software and a PC, as the update can be car- ried out in the fi eld. The capacity of the memory card depends on the user profi le, including GPS position data, operating time, and parameters specifi c to the unit such as sensor data, which all can be stored on the card at intervals defi ned by the user.
    [Show full text]
  • Brazing Filler Metals
    This is a repository copy of Brazing filler metals. White Rose Research Online URL for this paper: http://eprints.whiterose.ac.uk/147639/ Version: Published Version Article: Way, M., Willingham, J. and Goodall, R. orcid.org/0000-0003-0720-9694 (2019) Brazing filler metals. International Materials Reviews. ISSN 0950-6608 https://doi.org/10.1080/09506608.2019.1613311 Reuse This article is distributed under the terms of the Creative Commons Attribution (CC BY) licence. This licence allows you to distribute, remix, tweak, and build upon the work, even commercially, as long as you credit the authors for the original work. More information and the full terms of the licence here: https://creativecommons.org/licenses/ Takedown If you consider content in White Rose Research Online to be in breach of UK law, please notify us by emailing [email protected] including the URL of the record and the reason for the withdrawal request. [email protected] https://eprints.whiterose.ac.uk/ International Materials Reviews ISSN: 0950-6608 (Print) 1743-2804 (Online) Journal homepage: https://www.tandfonline.com/loi/yimr20 Brazing filler metals Matthew Way, Jack Willingham & Russell Goodall To cite this article: Matthew Way, Jack Willingham & Russell Goodall (2019): Brazing filler metals, International Materials Reviews, DOI: 10.1080/09506608.2019.1613311 To link to this article: https://doi.org/10.1080/09506608.2019.1613311 © 2019 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group Published online: 14 May 2019. Submit
    [Show full text]
  • 2019 Vintage Air Catalog.Pdf
    The Most TrUsted Name In Performance Air Conditioning ® 2 0 19 43 YEARS InMotion THEFour Decades COOL Of Leadership LIFE ® t Vintage Air, We haVe Worked eVerY daY since 1976 With the same commitment to oUr manY cUstomers that We haVe serVed throUgh- AoUt the World for the last 43 Years. It is VerY reWarding for me to knoW that most of mY friends todaY are also cUstomers, and that theY belong to an eVer-eVolVing commUnitY. The cars haVe become more sophisticated and the aVerage bUild qUalitY has become simplY astoUnding. At the same time, manY neW enthUsiasts, some With less “greY beard” knoWledge, haVe joined oUr ranks and Want to learn all theY can to participate in this great aUtomotiVe hobbY. The air conditioning sYstems and ancillarY prodUcts that We bUild are eVolVing as Well. OUr SUreFit TM sYstems are aVailable for a groWing VarietY of makes and models of cars, making installation easier than eVer before. The principle benefit of the SUreFit TM kit is that the compo- nents are VerY specific to the Vehicle, so With oUr comprehensiVe instrUction manUals We haVe VirtUallY eliminated the most common mistakes made in manY air conditioning installations. We are alWaYs eager to complY With goVernment oVersight of oUr indUstrY, and eVen When We maY not necessarilY agree With each neW laW, We Understand that it is oUr responsibilitY to complY. AccordinglY, We haVe alWaYs been proactiVe in addressing these issUes and bringing them to the market earlY. We implemented the Use of HFC-134a refrigerant in oUr sYstems before anY air conditioning sYstems manUfactUrer in the United States, inclUding the OEM car bUilders.
    [Show full text]
  • Yakut Medical Journal» Is Included in the Approved by Chuvashova I.I., the Higher Attestation Commission of the Russian Kononova S.L
    ISSN 1813-1905 (print) ISSN 2312-1017 (online) 4(68) `2019 ЯКУТСКИЙ МЕДИЦИНСКИЙ ЖУРНАЛ The founder The Yakut Science Centre of Complex Medical Problems YAKUT Editor- in- chief Romanova A.N., MD MEDICAL Editorial Board: Deputy Chief Editor and Executive secretary Nikolaev V.P., MD JOURNAL Scientific editor Platonov F.A. MD SCIENTIFIC - PRACTICAL JOURNAL Editorial Council: OF THE YAKUT SCIENCE CENTRE OF COMPLEX Aftanas L.I., MD, Professor, acad. RAMS MEDICAL PROBLEMS (Novosibirsk) Voevoda M.I., MD, Professor, Corresponding Member RAMS (Novosibirsk) Ivanov P.M., MD, Professor (Yakutsk) Quarterly Kryubezi Eric, MD, Professor (France) Maksimova N.R., MD (Yakutsk) Nelson Debora, MD, Professor (USA) Registered by the Office of the Federal Service on Nikitin Yu.P., MD, Professor, Acad. RAMS supervision in the field of communications, information (Novosibirsk) technologies and mass communications in the Republic Odland John, MD, Professor (Norway) Sakha (Yakutia) December 13/2016 Puzyrev V.P., MD, Professor, Acad. RAMS (Tomsk) Reutio Arya, MD, PhD, Professor (Finland) Sleptsova S.S., MD, Professor (Yakutsk) Registration number PI No.ТU 14-00475 Fedorova S.A., Doctor of Biology (Yakutsk) Husebek Anne, MD, Professor (Norway) Subscription index: 78781 Khusnutdinova E.K., Doctor of Biology, Professor Free price (Ufa) Chasnyk V.G., MD, Professor (Saint Petersburg) Editors: «Yakut Medical Journal» is included in the approved by Chuvashova I.I., the Higher Attestation Commission of the Russian Kononova S.l. Federation List of leading peer-reviewed scientific Semenova T.F. (English) journals and publications, in which the main scientific results of dissertations for the acquisition of scientific Computer design degrees of Doctor and Candidate of science on Sannikova M.I.
    [Show full text]
  • Definition of Cuprobraze
    WHAT IS CUPROBRAZE®? Introduction CuproBraze® is an official trademark registered by International Copper Association. Under the CuproBraze ™ brand, a heat exchanger manufacturing technology is commercialized. CuproBraze® heat exchangers are made using special anneal-resistant alloys of copper and brass. Tubes are fabricated from brass strip and coated with a brazing filler material. The copper fins, coated tubes, headers and side supports made of brass are fitted together into a core assembly, which is then brazed in a furnace. The fin copper, tube brass and brazing alloy used in the technology, have been patented by Aurubis (www.aurubis.com). Consequently, consult the owners of the intellectual property rights in case of doubts on infringement of the rights. To be on the safe side both technically and legally, it is advised to follow the guidelines of CuproBraze® Brazing Handbook, Edition #10 or later version (free download on www.cuprobraze.com). CuproBraze® heat exchangers are today used mainly, but not exclusively, in heavy duty off-road vehicles, like mining vehicles, agricultural vehicles, construction equipment, military vehicles and in locomotives and stationary generators, as well as in heavy-duty highway trucks and buses and in some lighter vehicles. History The CuproBraze® mark has been in use since 1999 with many small, mid-size and high- volume production facilities are making CuproBraze® heat exchangers for OEMs and the aftermarket in the years since. So called “one-shot” brazing entered production scale in 2008. During that time CuproBraze® has been promoted through advertising, press, exhibitions, websites and other collateral materials. The CuproBraze Executive Report issue Number 61 on twelve CuproBraze milestones titled “CuproBraze® Secrets to Success” http://cuprobraze.com/wp-content/uploads/2015/03/0318-ICA-ER61- Milestones.pdf indicates evidence of historical activities related to the CuproBraze® mark.
    [Show full text]
  • Rolled Products Facts & Figures Aurubis Rolled Products
    Rolled Products Facts & Figures Aurubis Rolled Products > 200,000 • metric tons of foil, strip, sheet and plate are produced worldwide annually by Aurubis. > 98 % • of global strip demand is covered by Aurubis’ alloy portfolio. 50 • metric tons is the size of the biggest copper and brass coil in the world, produced by Aurubis. 4 • rolling mills in Europe and the US. 4 • tin-plating lines in Europe and the US. Min. 0.025 mm to max. 200 mm extensive thickness range – from foil to plate. Pori (Finland) Emmerich (Germany) (Germany) Fehrbellin Seoul (Korea) Västerås (Sweden) Tokyo (Japan) Finspång (Sweden) Hamburg (Germany) Group headquarters (Taiwan) St. Petersburg (Russia) Taipei Chicago (US) Dolný Kubín (Slovakia) Shanghai (China) Buffalo (US) Avellino (Italy) Zutphen (Netherlands) Lünen (Germany) Mortara (Italy) Pirdop (Bulgaria) Hong Kong (China) Röthenbach (Germany) Brussels (Belgium) Yverdon-les-Bains (Switzerland) Istanbul (Turkey) Olen (Belgium) Lyon (France) Stolberg (Germany) Prague (Czech Republic) Barcelona (Spain) Birmingham (United Kingdom) Dubai (UAE) Strass (Germany) Bangkok (Thailand) Ho Chi Minh City (Vietnam) Singapore (Singapore) Contents THE GROUP Aurubis Group 4 Sales and Aurubis Rolled Products 5 Raw materials Products Slitting Centers distribution Cathodes Continuous Wire rod THE PRODUCTS Offering the broadest range 6 Concentrates The copper is processed cast shapes Service Centers An international Alloys 8 and recycling into products. located near sales and Technology with outstanding possibilities 10 materials are the Some products are our customers distribution raw materials already the result of cut strips to network Electrical and electronics industries 11 Strips/ Specialty rod/ Precious Rolled from which copper copper production. the desired markets our Tin-plated solutions 12 is produced.
    [Show full text]
  • Off-Road Vehicle 1 Off-Road Vehicle
    Off-road vehicle 1 Off-road vehicle An off-road vehicle is considered to be any type of vehicle which is capable of driving on and off paved or gravel surface. It is generally characterized by having large tires with deep, open treads, a flexible suspension, or even caterpillar tracks.[citation needed] Other vehicles that do not travel public streets or highways are generally termed off-highway vehicles, including tractors, forklifts, cranes, backhoes, bulldozers, and golf carts.[citation needed] Off-road vehicles have an enthusiastic following because of their many uses and versatility. Several types of motorsports involve racing off-road vehicles. The three largest "4-wheel vehicle" off-road types of Mercedes-Benz Unimog in the Dunes of Erg Chebbi in Morocco. Note the high ground competitions are Rally, Desert Racing, and Rockcrawling.[citation clearance due to Portal gear axles needed] The three largest types of All Terrain Vehicle (ATV) / Motorcycle competitions are Motocross, Enduro, and also Desert Racing like Dakar Rallye and Baja 1000.[citation needed] The most common use of these vehicles is for sight seeing in areas distant from pavement. The use of higher clearance and higher traction vehicles enables access on trails and forest roads that have rough and low traction surfaces. History One of the first modified off-road vehicles was the Kégresse track, a conversion undertaken first by Adolphe Kégresse, who designed the original while working for Czar Nicholas II of Russia between 1906 and 1916.[1] The system uses an unusual caterpillar track which has a flexible belt rather than interlocking metal segments.
    [Show full text]
  • Off-Highway Vehicle Technology Roadmap
    DOE/EE-0261 ANL/ESD/02-1 OFF-HIGHWAY VEHICLE TECHNOLOGY ROADMAP A Joint Venture of Industry and Government December 2001 Document Availability This report is available via the U.S. Department of Energy Office of Heavy Vehicle Technologies’ web site, www.trucks.doe.gov. It is also available via the Argonne National Laboratory Transportation Technology R&D Center’s web site, www.transportation.anl.gov, and via the DOE Information Bridge, http://www.doe.gov/bridge. Contact Information U.S. Department of Energy program contacts are: Dr. James J. Eberhardt, Director Gurpreet Singh, Program Manager Office of Heavy Vehicle Technologies Office of Heavy Vehicle Technologies U.S. Department of Energy U.S. Department of Energy EE-33 EE-33 1000 Independence Avenue, S.W. 1000 Independence Avenue, S.W. Washington, DC 20585 Washington, DC 20585 Phone: (202) 586-1694 Phone: (202) 586-2333 E-mail: [email protected] E-mail: [email protected] The Roadmap coordinator is: Frank Stodolsky, Principal Investigator Argonne National Laboratory 955 L’Enfant Plaza North, S.W. Suite 6000 Washington, DC 20024 Phone: (202) 488-2431 E-mail: [email protected] This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.
    [Show full text]