Structural Design and Construction Engineering Technology, B.S. 1

Total Page：16

File Type：pdf, Size：1020Kb

Structural Design and Construction Engineering Technology, B.S. 1 STRUCTURAL DESIGN AND CONSTRUCTION ENGINEERING TECHNOLOGY, B.S. Begin Campus: Any Penn State Campus End Campus: Harrisburg Career Paths The SDCET program is designed to prepare students for careers in the highly specialized construction industry. It allows for flexible scheduling, enabling students to focus their specialization in either construction or design. Study through these options could lead to opportunities as structural designers for bridges, buildings, or other projects or as project managers for commercial construction projects. Career options may also be available in government for state and federal highway projects and with construction ﬁrms in the specialty areas of scheduling, estimating, and cost control. Finally, opportunities may exist for graduates to pursue opportunities as designers, owners, or contractor representatives. Careers The U.S. Bureau of Labor Statistics expects excellent employment opportunities in the construction industry for the coming years. Penn State Harrisburg graduates in Structural Design and Construction Engineering Technology have had impressive job placements in the last eight years. MORE INFORMATION ABOUT POTENTIAL CAREER OPTIONS FOR GRADUATES OF THE STRUCTURAL DESIGN AND CONSTRUCTION ENGINEERING TECHNOLOGY PROGRAM (https://harrisburg.psu.edu/ science-engineering-technology/civil-structural-engineering/bachelor- science-structural-design-and-construction-engineering-technology/) Professional Resources • American Concrete Institute (https://www.concrete.org/ students.aspx) • American Institute of Constructors (http:// www.professionalconstructor.org/) • American Institute of Steel Constructors (https://www.aisc.org/) • American Society of Civil Engineers (http://www.asce.org/join/).

Copy Link

Recommended publications

Construction Engineering Technology 1
Construction Engineering Technology 1 serve the needs for continuing education within the industry, particularly CONSTRUCTION in the regional construction community. ENGINEERING TECHNOLOGY These needs and opportunities for service are assessed regularly through close cooperation with local and regional construction professionals The construction industry is the largest industry in the world. Leadership and industry associations. An active Advisory Board, representing a in this ﬁeld requires a broad knowledge of labor, materials and equipment, broad cross-section of the industry, meets regularly to offer support and capital and construction procedures. The interdisciplinary approach of guidance necessary to preserve uncompromising excellence. the construction engineering technology program offers the student The Construction Engineering Technology program is accredited by specialized coursework in all phases of construction, designed to prepare the Engineering Technology Accreditation Commission of ABET, http:// him or her for responsible positions in industry. www.abet.org (http://www.abet.org/). The educational objectives of the The primary goal of the Construction Engineering Technology (CET) Construction Engineering Technology program are consistent with those program is to enhance the quality of the instructional program through required by ETAC of ABET and are listed under “Division of Engineering effective management of the curriculum, teaching assignments and Technology” in the Catalog. ﬁscal and physical resources. This goal includes
[Show full text]
Engineering Construction Site Safety
Designing for Construction Safety: Concepts and Practice John Gambatese, PhD, PE School of Civil and Construction Engineering Oregon State University 2009 DOE ISM Conference Knoxville, TN August 24-27, 2009 Bio – John Gambatese John Gambatese is an Associate Professor in the School of Civil and Construction Engineering at Oregon State University. Dr. Gambatese’s educational background includes Bachelor and Master of Science degrees in Civil Engineering from the University of California at Berkeley with emphases in structural engineering, and a Ph.D. in Civil Engineering from the University of Washington in the area of construction engineering and management. He has worked in industry as a structural engineer, and as a project engineer for a construction management firm. Dr. Gambatese has taught courses on construction contracts and specifications, construction safety and productivity improvement, planning and scheduling, structural analysis and design, temporary construction structures, and engineering economics. He has performed research and published numerous articles on construction worker safety, constructability, innovation, construction contracting, and life cycle properties of civil engineering facilities. He is a member of the American Society of Civil Engineers (ASCE) and American Society of Safety Engineers (ASSE), and actively participates on ASCE’s Construction Site Safety Committee, Constructability Committee, and Construction Research Council. He is a licensed Professional Civil Engineer in California. Prevention through
[Show full text]
Grand Challenges in Earthquake Engineering Research: a Community Workshop Report
This PDF is available from The National Academies Press at http://www.nap.edu/catalog.php?record_id=13167 Grand Challenges in Earthquake Engineering Research: A Community Workshop Report ISBN Committee for the Workshop on Grand Challenges in Earthquake 978-0-309-21452-0 Engineering Research--A Vision for NEES Experimental Facilities and Cyberinfrastructure Tools; Committee on Seismology and Geodynamics; 102 pages National Research Council 6 x 9 PAPERBACK (2011) Visit the National Academies Press online and register for... Instant access to free PDF downloads of titles from the NATIONAL ACADEMY OF SCIENCES NATIONAL ACADEMY OF ENGINEERING INSTITUTE OF MEDICINE NATIONAL RESEARCH COUNCIL 10% off print titles Custom notification of new releases in your field of interest Special offers and discounts Distribution, posting, or copying of this PDF is strictly prohibited without written permission of the National Academies Press. Unless otherwise indicated, all materials in this PDF are copyrighted by the National Academy of Sciences. Request reprint permission for this book Copyright © National Academy of Sciences. All rights reserved. Grand Challenges in Earthquake Engineering Research: A Community Workshop Report Grand Challenges in Earthquake Engineering Research A Community Workshop Report Committee for the Workshop on Grand Challenges in Earthquake Engineering Research— A Vision for NEES Experimental Facilities and Cyberinfrastructure Tools Committee on Seismology and Geodynamics Board on Earth Sciences and Resources Division on Earth and Life Studies Copyright © National Academy of Sciences. All rights reserved. Grand Challenges in Earthquake Engineering Research: A Community Workshop Report THE NATIONAL ACADEMIES PRESS 500 Fifth Street, N.W. Washington, DC 20001 NOTICE: The project that is the subject of this report was approved by the Governing Board of the National Research Council, whose members are drawn from the councils of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine.
[Show full text]
Design-Build 101 One Entity, One Contract, One Unified Workflow - from Concept to Completion
Design-Build 101 One entity, one contract, one unified workflow - From concept to completion FOR THE EXPERIENCE September 2017 What is Design-Build? Design-build is a method of project delivery in which one entity – the design-build team – works under a single contract with the project owner to provide design and construction services. Our team can begin the build phase concurrent with the design phase, meaning we can get shovels in the ground much earlier than other delivery methods. This time savings can equate to cost savings, too, by reducing project and opportunity costs through minimizing the time owners must carry Design-Build Contractual construction financing and related costs. Relationship Our design-build approach also creates a streamlined communication process. Instead of owners needing to relay important project information to the design firm(s) and construction firm, owners work directly with one TRADITIONAL PROJECT DELIVERY point-of-contact. This entity is considered the single source of responsibility and contractual risk for all phases Sub- Designer of the project including cost estimating, assessments, Consultants Owner pre-construction, engineering, design, subcontracting, Sub- construction and post-construction. Contractor Contractors Owner must manage two separate contracts; owner Design-Build Advantages becomes middleman, settling disputes between the designer and the contractor. Designer and contractor • Contractor is the single source of responsibility can easily blame one another for cost overruns and • Owner
[Show full text]
Architecture, Construction & Interior Design Pathways
Architecture, Construction & Interior Design Pathways Table of Contents: Career Pathways Construction Design & Pre-construction Maintenance & Operations Related Majors What Bellevue College Offers Architecture Careers Construction Careers Apprenticeships Best Colleges in Washington Schools and Colleges in the Area King-Snohomish Spokane East Side Bellevue College does not discriminate on the basis of race, color, national origin, language, ethnicity, religion, sex, sexual orientation, including gender identity or expression, disability, or age in its programs and activities. Please see policy 4150 at www.bellevuecollege.edu/policies/. The following people have been designated to handle inquiries regarding non-discrimination policies: Title IX Coordinator, 425-564-2641, Office C227, and EEOC/504 Compliance Officer, 425-564-2266, Office R130. Additional Career Pathways OSPI Career Clusters Career Path – Industrial & Engineering Technology – Building & Fixing The field of Industrial & Engineering Technology is a way to speed up production, using simpler techniques and more efficient manufacturing processes. This field craves creative and technically proficient individuals who can help achieve efficient and profitable productivity. Career Cluster 2 – Architecture and Construction The Architecture and Construction career cluster prepares learners for designing, planning, managing, building or maintaining the structures where we live, work and play. Associate’s Degree or Technical Certificate Bachelor’s Degree Master’s, PhD or Professional
[Show full text]
The Selection of Building Services Consulting Engineers in Northern Ireland
The selection of Building Services Consulting Engineers in Northern Ireland J. G Gunning1 and Y. McNally2 1Senior Lecturer, University of Ulster, Faculty of Engineering, School of the Built Environment, Jordanstown, BT37 0QB, Northern Ireland 2Postgraduate Student, University of Ulster, Faculty of Engineering, School of the Built Environment, Jordanstown, BT37 0QB, Northern Ireland Email: [email protected] Abstract: The two main objectives of this research were to quantify opinions on the expected and perceived levels of the service/performance required by the client, and to quantify the level of importance assigned to various criteria used in the selection process. The views of six major consulting engineering practices and eight developers/project managers in both public and private sectors were obtained using semi structured interviews. A Servqual-type model was developed to analyse the gaps between the clients’ expectations of the engineers’ perception of their own performance, as well as the gap between the perceptions and expectations of the engineers’ performance from both clients and engineers themselves. The results indicated that the engineers clearly misunderstood what the client expected from them in terms of controlling time, cost and quality and of resources and communication. Clients were dissatisfied with all aspects of the service received other than the amount of the professional fee paid – presumably arising from the current competitive climate surrounding fees. In other words, prices were reduced in order to obtain work but the low fees earned do not permit the full service expected by developers. Clients indicated that the lowness of the fee paid was much less important to them than the level of service received, but engineers thought otherwise.
[Show full text]
Construction Industry 2019
RESOURCE GUIDE Construction Industry 2019 Funding for this Publication provided by: Construction Industry Association of Rochester (CIAR); UNiCON Rochester—Unions and Businesses United in Construction; and the Workforce Development Institute (WDI) DIRECTORY MISSION The mission of the Construction Industry Resource Directory is to make information available for current and future career seekers who have an interest in joining the skilled construction trades and related professions. The vast field of construction incorporates numerous professions; the purpose of this directory is to provide information related to each craft and profession, and provide a connection to the pathways for entering your field of choice. This directory contains contact information for the Rochester area local unions associated with each trade. It also delineates secondary schools, community colleges, as well as both public and private universities in the Rochester area that offer training programs related to various Architectural, Engineering and Construction related professions. The construction industry in Rochester has followed the national trend of having an increase in job availability. At the same time employers are reporting a lack of qualified individuals to hire. Local apprenticeship, pre-apprenticeship and trade school programs help bridge this gap. NOW is the perfect time to consider a career in construction! Union apprenticeship programs are a great way to become proficient in a craft while working in a trade and earning a paycheck. They are designed with both classroom instruction and jobsite training experiences. Programs typically last 3 to 5 years, and apprentices receive one or more pay raises each year. Pre-apprenticeship programs are introductory programs that give you the background you need to be able to apply to apprenticeship programs.
[Show full text]
Preservation Construction: Design-Build Versus Design-Bid-Build
PRESERVATION CONSTRUCTION: DESIGN-BUILD VERSUS DESIGN-BID-BUILD by NICHOLAS MICHAEL PATRICK (Under the Direction of Wayde Brown) ABSTRACT This thesis will compare the two major construction delivery systems in their application in preservation construction projects, Design-Build (DB) and Design-Bid-Build (DBB). Several factors of construction influence the choice of DB or DBB delivery systems. What are these factors, and how do they affect final products in the context of preservation construction? These factors will be determined and described based on the author’s personal experience working for Aeon Preservation Services, LLC. on two preservation projects. The projects, the restoration of original cast iron canopies at The Department of Veterans Affairs building and the stone façade restoration at the National Gallery of Art West Building, were both located in Washington, D.C. and are examples of DB and DBB. These projects will be analyzed and compared using case studies. INDEX WORDS: Historic preservation, Preservation construction, Construction, Construction management, Project delivery systems, Design-Build, Design-Bid-Build, The Veterans Affairs building, The National Gallery of Art West Building PRESERVATION CONSTRUCTION: DESIGN-BUILD VERSUS DESIGN-BID-BUILD by NICHOLAS MICHAEL PATRICK AB, The University of Georgia, 2010 A Thesis Submitted to the Graduate Faculty of The University of Georgia in Partial Fulfillment of the Requirements for the Degree MASTER OF HISTORIC PRESERVATION ATHENS, GA 2013 © 2013 Nicholas Michael Patrick All Rights Reserved PRESERVATION CONSTRUCTION: DESIGN-BUILD VERSUS DESIGN-BID-BUILD by NICHOLAS MICHAEL PATRICK Major Professor: Wayde Brown Committee: Mark E. Reinberger Scott Messer David Matheny Electronic Version Approved: Maureen Grasso Dean of the Graduate School The University of Georgia August 2013 DEDICATION I would like to dedicate this Masters Thesis to my beloved State of Georgia.
[Show full text]
Institutional Pressures and Megaproject Social Responsibility Behavior: a Conditional Process Model
buildings Article Institutional Pressures and Megaproject Social Responsibility Behavior: A Conditional Process Model Linlin Xie 1, Tianhao Ju 1,* and Bo Xia 2 1 School of Civil Engineering & Transportation, South China University of Technology, Guangzhou 510000, China; [email protected] 2 School of Civil Engineering and Built Environment, Queensland University of Technology, Brisbane, QLD 4001, Australia; [email protected] * Correspondence: [email protected] Abstract: Megaproject social responsibility (MSR) is a critical factor regarding the sustainable delivery of megaprojects and MSR behavior to implement MSR. However, the questions of which factors effectively promote MSR behavior and how these factors work remain underexamined. Thus, this study aims to examine how the external institutional pressure and internal factors composed of rela- tional behavior and pure altruistic values affect MSR behavior. On the basis of a conditional process analysis conducted on a set of survey data from various organizations involved in megaprojects in China, the results revealed that the higher the degree of mimetic pressure, the higher the degree of MSR behavior. Concurrently, relational behavior mediates the relationship between normative pressures and MSR behavior. Relational behavior also drives MSR behavior, and pure altruistic values moderate the relationships between institutional pressures and MSR behavior. These ﬁndings also provide practical suggestions for policymakers on the implementation and governance of MSR. Citation: Xie, L.; Ju, T.; Xia, B. Keywords: megaproject social responsibility; institutional pressures; relational behavior; Institutional Pressures and altruistic values Megaproject Social Responsibility Behavior: A Conditional Process Model. Buildings 2021, 11, 140. https://doi.org/10.3390/ 1. Introduction buildings11040140 Following USD $6–9 trillion per year investment in the global megaprojects market, the megaproject research has received increasing attention from both industry and academia Academic Editor: around the world [1].
[Show full text]
An Investigative Analysis of Skill Sets for Different Delivery Methods in the Building Industry
Iowa State University Capstones, Theses and Creative Components Dissertations Spring 2018 An Investigative Analysis Of Skill Sets For Different Delivery Methods In The Building Industry Deepak Reddy Gade Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/creativecomponents Part of the Construction Engineering and Management Commons Recommended Citation Gade, Deepak Reddy, "An Investigative Analysis Of Skill Sets For Different Delivery Methods In The Building Industry" (2018). Creative Components. 15. https://lib.dr.iastate.edu/creativecomponents/15 This Creative Component is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Creative Components by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. An Investigative Analysis Of Skill Sets For Different Delivery Methods In The Building Industry Creative component final report April 2018 Principal Investigator Deepak-Reddy Gade Authors Deepak-Reddy Gade A report submitted to Iowa State University. i TABLE OF CONTENTS INTRODUCTON …………………………………………………………………………... 1 BACKGROUND …………………………………………………………………………… 1 LITRATURE REVEIW ……………………………………………………………………. 9 RESEARCH OBJECTIVE ………………………………………………………………… 12 METHODOLOGY ………………………………………………………………………….12 FINDINGS AND DISCUSSION …………………..………………………………………. 14 CONCLUSIONS …………………………………………………………………………... 24 LIMITATIONS
[Show full text]
Structural Engineers Association of Northern California
575 Market Street, Suite 2125 | San Francisco, CA 94105-2870 email: [email protected] | 415-974-5147 www.seaonc.org Structural Engineers Association OF NORTHERN CALIFORNIA Our mission: To advance the practice of structural engineering, to build community among our members, and to educate the public regarding the structural engineering profession. Our vision: A world in which structural engineers are valued by the public for their contributions to building a safer and stronger community. JULY 2020 See our History, Mission Statement, and Bylaws for more information. Vol. XXI|I, No. 7 INSIDE THIS ISSUE PRESIDENT’S MESSAGE President’s Message pp. 1-2 by Emily Guglielmo 2020 EiSE Award pp. 2 -7 Welcome to the beginning of a new year for SEAONC! It Recipients is with both excitement and some trepidation that I provide the first of what will be several Presidential messages. I am Committee News pp. 8 - 9 deeply honored to serve you and to build upon SEAONC’s longstanding legacy. I would first like to introduce your 2020- Job Forum pp. 11-15 2021 SEAONC Board: Kevin Moore, Vice President; Janiele Maffei, Past-President; Katy Briggs, Director; Joyce Feng, Director; Ben Mohr, Director; Anna Dix, Director; Susan LaFore, Director; Jonathan Buckalew, Director. I am humbled and grateful to be surrounded by such thoughtful, forward-thinking colleagues and friends. I have been privileged to serve on your Board since 2017. Since that time, our membership and our Association has benefited from a robust economy and the use of effective, well-established strategies. However, a few months ago, that comfortable approach ended quite abruptly.
[Show full text]
Statement of Qualifications Table of C Ontents
STATEMENT OF QUALIFICATIONS TABLE OF C ONTENTS Section: I. About Us II. Engineering and Construction Services . Planning and Scheduling . Civil Engineering Drainage and Floodplain Management Grading and Erosion Control Roads Water and Wastewater Systems Dry Utilities and Power Generation Arbitration Representation and Expert Witnessing . Land Development Preliminary Planning and Layout Due Diligence, Permitting and Entitlement Landscape Design . Structural Engineering Foundation Plans Framing Plans (Steel/Wood) Retaining Walls Concrete Design Inspections and Reports . Environmental Engineering Environmental Impact Assessment and Mitigation Solid Waste Management . Project Management . Construction Management III. Distressed Project Services IV. Key Personnel V. Representative Clients and Projects ABOUT US ABOUT US Alliance Engineering, Ltd. is an engineering and consulting firm that provides engineering design services, construction management services, project implementation services, and land development services to public and private sector clients. One of our unique characteristics is our ability to assist with financing projects from conception through completion. We provide a broad range of quality services, delivered consistently on time at competitive prices. We are committed to delivering value to our clients by considering the most cost effective way to meet your schedule and deliver a product that meets your quality expectations. Our engineers have provided services throughout the United States and within Canada and we have physical offices in both Colorado and Massachusetts. Our consulting services include support of industrial, commercial, and residential clients and we are capable of providing turnkey services if requested. Alliance Engineering, Ltd. (AEL) is built on the premise that teams of seasoned professionals led by experienced and technically proficient engineers can most effectively manage complex projects when aided by leading edge technology specifically designed for that environment.
[Show full text]