DOCSLIB.ORG

Hot Water Storage Tanks & Heat Exchangers

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hot Water Storage Tanks & Heat Exchangers Hot Water Storage Tanks & Heat Exchangers Storatherm, Longtherm Storatherm, Longtherm WeWe are are only only satisfied satisfied if ifyou you are are Contents Hot Water Storage Tanks & Heat Exchangers We make sure that everything fits Overview Reflex Hot Water Storage Tank Program 6-7 Heating, cooling and hot water supply systems the demands on supply equipment are varied and complex. You'll be well-advised for every Storatherm Heat Steel Accumulation Heat Balancing Tanks eventuality with our coordinated product ranges. Reflex can offer you the right components for Storatherm Heat HF & H 8 ReflexReflex has set has itself set theitself goal the ofgoal supporting of supporting you withyou wellwith well each specific task – and you can be sure that they thought-outthought-out solutions. solutions. Whatever Whatever job you job need you doingneed doingin water in water can be integrated seamlessly into the interplay of Storatherm Heat HF/R & H/R 9 supplysupply engineering, engineering, why not why put not your put trust your in trust our incomprehensive our comprehensive a larger overall solution. The result: well thought-out systems that simply perform better. range rangeof products of products and accompanying and accompanying tailored tailored services? services? We will We will Storatherm Heat HF/1 & H/1 10 ensureensure that your that decision your decision to opt tofor opt Reflex for Reflex is the isright the oneright in everyone in every respectrespect – from – advice from advice and design and design to installation to installation and ongoing and ongoing Storatherm Heat HF/2 & H/2 11 operation.operation. Storatherm Heat Combi HC/1 & HC/2 12 Storatherm Heat Accessories 13 Expansion Deaeration Vessels Systems & Separation Technology Storatherm Aqua Glass-lined Hot Water Heater Water Make-Up Pressurisation The Reflex Systems Storatherm Aqua AB/1 - AF/1 - AC/1 14-15 Systems & Water Product Range Treatment Storatherm Aqua Solar AB/2 - AF/2 16-17 Hot Water Storatherm Aqua Heat Pump AH/1 - AH/2 18 Storage Tanks & Heat Services Exchangers Storatherm Aqua Combi AC 19 Storatherm Aqua Load AL/R 20-21 Storatherm Aqua Electrical Elements for AL/R 22 Reflex’sReflex’s mission mission is embodied is embodied in the incompany’s the company’s slogan: slogan: In this product guide, we've summarised our Storatherm Aqua Accessories 23-24 “Thinking“Thinking solutions”. solutions”. Reflex’s Reflex’s strength strength is to think is to inthink terms in terms entire product range for you meaning you can of solutions.of solutions. Reflex Reflex develops develops ideas ideasthat help that youhelp to youmove to move locate all our available products, series and technical information quickly and easily. All forwardforward based based on decades on decades of experience, of experience, in-depth in-depth technical technical Longtherm Heat Exchangers weights given are net weights. understandingunderstanding and intimate and intimate knowledge knowledge of the ofindustry! the industry! Reflex reserve the right to modify the details Longtherm with threaded connections 26-27 published in this document. General Sales Conditions of Reflex Winkelmann GmbH: Please Longtherm with flanged connections 28-29 consult www.reflex.de Longtherm accessories 30-31 Longtherm quick selection table 32 3 2 2 Contents We are only satisfied if you are ContentsHot Water Storage Tanks & Heat Exchangers Hot Water Storage Tanks & Heat Exchangers We make sure that everything fits Overview Reflex Hot Water Storage Tank Program 6-7 WeHeating, make cooling sure that and everythinghot water supply fits systems Overview Reflex Hot Water Storage Tank Program 6-7 the demands on supply equipment are varied Heating, cooling and hot water supply systems and complex. You'll be well-advised for every Storatherm Heat Steel Accumulation Heat the demands on supply equipment are varied Balancing Tanks andeventuality complex. with You'll our be coordinated well-advised product for every ranges. Storatherm Heat Steel Accumulation Heat Reflex can offer you the right components for Balancing Tanks eventuality with our coordinated product ranges. Storatherm Heat HF & H 8 Reflexeach specific can offer task you the– and right you components can be sure for that they can be integrated seamlessly into the interplay of Storatherm Heat HF & H 8 Reflex has set itself the goal of supporting you with well each specific task – and you can be sure that they a larger overall solution. The result: well Storatherm Heat HF/R & H/R 9 thought-out solutions. Whatever job you need doing in water can be integrated seamlessly into the interplay of thought-out systems that simply perform better. Storatherm Heat HF/R & H/R 9 supply engineering, why not put your trust in our comprehensive a larger overall solution. The result: well thought-out systems that simply perform better. Storatherm Heat HF/1 & H/1 10 range of products and accompanying tailored services? We will Storatherm Heat HF/1 & H/1 10 ensure that your decision to opt for Reflex is the right one in every respect – from advice and design to installation and ongoing Storatherm Heat HF/2 & H/2 11 Storatherm Heat HF/2 & H/2 11 operation. Storatherm Heat Combi HC/1 & HC/2 12 Storatherm Heat Combi HC/1 & HC/2 12 Storatherm Heat Accessories 13 Expansion Storatherm Heat Accessories 13 Deaeration ExpansionVessels DeaerationSystems & Vessels SystemsSeparation & SeparationTechnology Technology StorathermStoratherm Aqua Glass-linedAqua Glass-lined Hot Water Hot Heater Water Heater Pressurisation WaterWater Make-Up Make-Up The Reflex Pressurisation Storatherm Aqua AB/1 - AF/1 - AC/1 14-15 Systems & Water The Reflex SystemsSystems Storatherm Aqua AB/1 - AF/1 - AC/1 14-15 Systems & Water ProductProduct Range Range TreatmentTreatment StorathermStoratherm Aqua SolarAqua AB/2 Solar - AF/2AB/2 - AF/2 16-17 16-17 Hot HotWater Water StorathermStoratherm Aqua HeatAqua Pump Heat AH/1Pump - AH/2AH/1 - AH/2 18 18 StorageStorage Tanks Tanks & Heat& Heat Services Services ExchangersExchangers StorathermStoratherm Aqua CombiAqua CombiAC AC 19 19 StorathermStoratherm Aqua LoadAqua AL/R Load AL/R 20-21 20-21 Storatherm Aqua Electrical Elements for AL/R 22 Storatherm Aqua Electrical Elements for AL/R 22 In this product guide, we've summarised our Reflex’s mission is embodied in the company’s slogan: In this product guide, we've summarised our entire product range for you meaning you can Storatherm Aqua Accessories 23-24 “Thinking solutions”. Reflex’s strength is to think in terms entire product range for you meaning you can Storatherm Aqua Accessories 23-24 of solutions. Reflex develops ideas that help you to move locate all our available products, series and technicallocate all information our available quickly products, and easily. series All and forward based on decades of experience, in-depth technical Longtherm Heat Exchangers weightstechnical given information are net weights. quickly and easily. All Longtherm Heat Exchangers understanding and intimate knowledge of the industry! Reflexweights reserve given theare rightnet weights.to modify the details Longtherm with threaded connections 26-27 publishedReflex reserve in this document.the right to General modify Salesthe details Longtherm with threaded connections 26-27 Conditionspublished ofin Reflexthis document. Winkelmann General GmbH: Sales Please Longtherm with flanged connections 28-29 consultConditions www.reflex.de of Reflex Winkelmann GmbH: Please Longtherm with flanged connections 28-29 consult www.reflex.de Longtherm accessories 30-31 Longtherm accessories 30-31 Longtherm quick selection table 32 Longtherm quick selection table 32 3 2 3 Hot Water Storage Tanks & Heat Exchangers Deaeration Systems & Separation Technology Hot Water Storage Tanks Count on us - from the initial idea to the solution Storatherm Heat / Accumulation heat balancing tanks - steel Reflex offer a range of services to assist you in finding the solution that best suits your needs. Take advantage of our Storatherm Aqua / Hot water heaters for sanitary use - glass lined combined expertise and experience and develop professional solutions together with us, down to the very last detail. Made-to-measure design: With the Reflex Pro calculation program Take the easiest route to correct design and sizing: Reflex Pro is the proven, continuously developed software solution you can use to quickly and simply achieve precise results.The software is available in three versions and we also offer a CAD library of our Reflex Pro Web products for integration into your construction prog- rammes. The online version calculates pressure retention and heat transfer systems in a few simple steps. The results Visit www.reflex.de/pro for further information and the are provided in the form of a PDF or text file for further option of downloading free of charge. use. Reflex Pro App Reflex Pro is available as an app for Android phone, iPhone, iPad and iPod touch! Whether you need to make a quick calculation on site or design a project on your mobile you will always leave a professional Heat Exchangers Heat Exchangers impression with your customers with the Reflex Pro app. & Tanks Storage Hot Water Hot Water Storage Tanks & Tanks Storage Hot Water Reflex Pro Win The full range of services for convenient use even without an Internet connection. The download version for Windows systems is perfect when you are regularly planning and designing pressure retention and heat transfer systems. 4 5 Hot Water Storage Tanks & Heat Exchangers Deaeration Systems & Separation Technology Hot Water
Load more

Recommended publications
  • Inspecting Water Heater Tanks in Residential Dwelling Units
    Inspecting Water Heater Tanks Course Document Inspecting Water Heater Tanks in Residential Dwelling Units Including Electric Water Tanks and Gas Water Tanks with Flammable Vapor Ignition Resistance Systems Page 1 of 18 Inspecting Water Heater Tanks Course Document Course title: “Inspecting water heater tanks in residential dwelling units.” Course objective: To obtain an understanding of how to inspect the water heater tanks in a single residential dwelling unit, including fuel and electric water heater tanks. Completing this course should enable an inspector to identify components of gas-fired and electric water heater tanks, recognize defects and safety hazards in relation to modern standards and requirements, explain how a flammable vapor ignition resistance system (FVIR) works, the importance of temperature-and-pressure relief valves, and checking confined spaces. This is not a code compliance course. There are many codes, and they change regularly. This level of inspection is beyond what an inspector would do on a general home inspection and exceeds InterNACHI's Standards of Practice. We will read text from modern building standards, we will apply those standards in a mock-up studio setting, and then we will perform inspections of hot water tanks at existing residential homes. We will watch and learn from a master plumber as he inspects two hot water tanks - one gas and one electric. At the end of the course, we will go over some suggested language that can be used in an inspection report. An inspection report should describe and identify in written format the inspected components of the system and should identify defects that were observed.
    [Show full text]
  • Installation and Maintenance Instructions
    Installation and maintenance instructions High-efficiency hot water storage tank Installation and maintenance instructions English High-efficiency hot water storage tank EKHWP300B EKHWP500B List of contents 1 Safety . 4 7 Technical data . .22 1.1 Observing instructions . 4 7.1 Basic data . 22 1.2 Warning signs and explanation of symbols . 4 7.1.1 EKHWP . 22 1.3 Avoid danger . 4 7.2 Performance diagrams . 23 1.4 Proper use . 5 7.2.1 EKHWP . 23 1.5 Instructions for operating safety. 5 7.3 Tightening torque . 23 1.5.1 Before working on the hot water storage tank and the heating system . .5 8 List of keywords . .24 1.5.2 Electrical installation of optional accessories . .5 1.5.3 Installation room . .5 1.5.4 Requirements of the heating and filling water . .5 1.5.5 Heating and sanitary side connection . .5 1.5.6 Operation . .5 1.5.7 Instructing the user/owner. .5 1.5.8 Documentation . .5 2 Product description. 6 2.1 Design and components . 6 2.1.1 High-efficiency hot water storage tank (Unpressurised system - drain-back) . .7 2.2 Brief description . 8 2.3 Accessories . 8 2.3.1 Electric immersion heaters . .8 2.3.2 Non return valves . .8 2.3.3 Dirt filter. .8 2.3.4 Scalding protection . .9 2.3.5 Solar storage tank extension kit . .9 3 Set-up and installation . 10 3.1 Set-up . 10 3.1.1 Important information . .10 3.1.2 Scope of delivery. .10 3.1.3 Installing the hot water storage tank .
    [Show full text]
  • Energy-Saving Analysis of Solar Heating System with PCM Storage Tank
    energies Article Energy-Saving Analysis of Solar Heating System with PCM Storage Tank Juan Zhao 1, Yasheng Ji 1, Yanping Yuan 1,*, Zhaoli Zhang 1 and Jun Lu 2 1 School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China; [email protected] (J.Z.); [email protected] (Y.J.); [email protected] (Z.Z.) 2 School of Urban Construction & Environment Engineering, Chongqing University, Chongqing 400045, China; [email protected] * Correspondence: [email protected]; Tel./Fax: +86-028-8763-4937 Received: 18 November 2017; Accepted: 15 January 2018; Published: 19 January 2018 Abstract: A solar heating system (SHS) with a phase change material (PCM) thermal storage tank is proposed with the view that traditional heat water storage tanks present several problems including large space requirements, significant heat loss and unstable system performance. An entire heating season (November–March) is selected as the research period on the basis of numerical models of the SHS-PCM. In addition, taking a public building in Lhasa as the object, the heating conditions, contribution rate of solar energy, and overall energy-saving capability provided by the heating system are analyzed under different PCM storage tanks and different terminal forms. The results show that an SHS with a PCM tank provides a 34% increase in energy saving capability compared to an ordinary water tank heating system. It is suggested that the design selection parameters of the PCM storage tank should specify a daily heat storage capacity that satisfies 70~80% of the entire heating season. A floor radiant system with supply/return water temperatures of 40/35 ◦C provides the optimal operation and the largest energy saving capability.
    [Show full text]
  • Design, Installation, and Performance of Solar Hot Water Systems in New Homes
    Design, Installation, and Performance of Solar Hot Water Systems in New Homes Eric Helton, IBACOS, Inc. Robb Aldrich and Gayathri Vijayakumar, Steven Winter Associates, Inc. ABSTRACT The performance of solar water heating systems at three homes in cold climates is reported. The house located in Colorado utilized the solar thermal system for space heating and domestic hot water and produced savings of approximately 105 therms of natural gas and $93 over the course of the first year of operation. The solar fraction ranged between 7% in the winter and 100% in the summer months. A prototype house in Wisconsin exhibited solar domestic hot water savings of approximately 86 therms of natural gas and $58 for 10 months of operation, with solar fractions ranging between 16% in the winter to 93% in the summer. The solar domestic hot water system installed at a house built in Massachusetts offset 72 gallons of heating oil/biodiesel fuel worth $133 by offering solar fractions between 26% and 87%. Installation deviations from the designs which affected performance were experienced in two of the homes. In one house, the solar loop heat exchanger within the storage tank was piped backwards, discouraging tank stratification. In another case, a tempering valve was installed between the storage tank and the tankless water heater, forcing the heater to fire, even when the solar storage tank had the capability of supplying the draw of hot water. These issues and their solutions are discussed. These cases are used to highlight some of the challenges of incorporating solar thermal systems into production building.
    [Show full text]
  • Design and Construction of a Solar Water Heater Based on the Thermosyphon Principle
    Ashdin Publishing Journal of Fundamentals of Renewable Energy and Applications ASHDIN Vol. 3 (2013), Article ID 235592, 8 pages publishing doi:10.4303/jfrea/235592 Research Article Design and Construction of a Solar Water Heater Based on the Thermosyphon Principle Nosa Andrew Ogie,1 Ikponmwosa Oghogho,2 and Julius Jesumirewhe3 1Mechanical Engineering Department, Petroleum Training Institute, P.M.B. 20, Effurun, Delta State, Nigeria 2Electrical and Information Engineering Department, Landmark University, P.M.B. 1001, Omu-Aran, Kwara State, Nigeria 3Mechanical Engineering Department, Igbinedion University, Okada, 1090 Edo State, Nigeria Address correspondence to Ikponmwosa Oghogho, [email protected] Received 4 June 2012; Revised 13 January 2013; Accepted 13 February 2013 Copyright © 2013 Nosa Andrew Ogie et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Abstract A solar water heating system for domestic use has been de- problems of environmental conservation, and global climate signed and constructed using locally available materials. Solar energy change and other air pollution issues caused mainly by is received by a flat-plate collector consisting of a thin absorber plate, burning of these hydrocarbon as a source of heat energy, integrated with underneath grids of fluid carrying tubes, and placed in an insulated casing with a transparent glass cover having a cold and a has led to the drive to use environmentally friendly and hot water tank integrated in the system. The radiation emitted by the renewable alternative sources of heat energy to eliminate or absorber plate cannot escape through the glass, thus increasing its tem- minimize these negative effects.
    [Show full text]
  • Domestic Hot Water Storage Tank Utilizing Phase Change Materials (Pcms): Numerical Approach
    energies Article Domestic Hot Water Storage Tank Utilizing Phase Change Materials (PCMs): Numerical Approach Ayman Bayomy 1,*, Stephen Davies 2 and Ziad Saghir 3 1 Mechanical and Industrial Engineering Department, Ryerson University, Toronto, ON M5B 2K3, Canada 2 Ecologix Heating Technologies Inc., Cambridge, ON N1R 7L2, Canada; [email protected] 3 Mechanical and Industrial Engineering Department, Ryerson University, Toronto, ON M5B 2K3, Canada; [email protected] * Correspondence: [email protected] Received: 25 April 2019; Accepted: 4 June 2019; Published: 6 June 2019 Abstract: Thermal energy storage (TES) is an essential part of a solar thermal/hot water system. It was shown that TES significantly enhances the efficiency and cost effectiveness of solar thermal systems by fulfilling the gap/mismatch between the solar radiation supply during the day and peak demand/load when sun is not available. In the present paper, a three-dimensional numerical model of a water-based thermal storage tank to provide domestic hot water demand is conducted. Phase change material (PCM) was used in the tank as a thermal storage medium and was connected to a photovoltaic thermal collector. The present paper shows the effectiveness of utilizing PCMs in a commercial 30-gallon domestic hot water tank used in buildings. The storage efficiency and the outlet water temperature were predicted to evaluate the storage system performance for different charging flow rates and different numbers of families demands. The results revealed that increases in the hot water supply coming from the solar collector caused increases in the outlet water temperature during the discharge period for one family demand.
    [Show full text]
  • A Guide to Buying Solar Water Heating Contents
    A guide to buying solar water heating Contents Thinking of going solar? p1 Costs and benefits p2 Reduced energy bills Installation costs Environmental benefits Is it right for you? p3 Hot water use House design How does it work? p4 Choosing a system p5 Packaged solar water heating systems System size ‘Open loop’ and ‘closed loop’ systems Collector panels Circulation system Hot water tanks Controllers Frost protection p13 Choosing an installer p14 Installation and building consents Use and maintenance p15 Maintenance requirements Any problems? p16 So how do you know your system is working properly? Top tips to use less hot water p17 Thinking of going solar? A properly specified and installed solar water heating system can slash your hot water bill. A solar water heating system can provide at least 50%* of your annual hot water needs. It can be effective nearly anywhere in New Zealand, even in less sunny areas. Over time, it can pay for itself through lower power bills. By using solar water heating, you’ll also be helping to reduce New Zealand’s greenhouse gas emissions. The Energy Efficiency and Conservation Authority (EECA) has produced this free guide, we explain what to look for, and how to use the system to get the best return in ‘free’ hot water. * Savings depend on local conditions and proper specification and installation of the solar water heating system. 1 Costs and benefits Reduced energy bills In general, it’s more expensive to install In summer, it may be possible to solar water heating in an existing house heat all the water you need with solar than in a new house.
    [Show full text]
  • Commercial Solar Water Heating
    Commercial Solar Water Heating Does your business have high hot water loads? Want to save money, and make your company more sustainable? Solar water heating may be right for you… How solar water heating works: A solar water heating system is a simple and reliable energy Controller source for your business or commercial space. Sized to fit the location’s needs, solar collectors are mounted on a south To Taps facing sloped or flat roof. Fluid (water or glycol) flows through Solar Collector the panels and is heated by the sun. It then runs to a solar storage tank connected to your existing hot water heater. Your Storage water heater only turns on if the solar-heated water still needs Tank a temperature boost. Hot water flows out of your taps just like Boiler it always has, but your hot water heating bill could be cut Pump 60-80%. You will also reduce greenhouse gas and other air Water Feed polluting emissions from your business! Solar collector types: There are two basic types of rooftop solar collectors. Flat-plate collectors contain a working fluid (water or a water-glycol mix) that flows through tubes in the collector, is heated directly by the sun, and carries that heat to the hot water storage tank.The dark glass covering and insulated backing are specially designed to collect heat and prevent it from being radiated back out of the collector. Evacuated tube collectors have a set of long dark glass tubes with metal absorbers in their cores, which are heated by the sun.
    [Show full text]
  • Water Heaters and Storage Tanks Ecodesign and Energy Label
    Water Heaters and Storage Tanks Ecodesign and Energy Label Review Study Task 1 Scope – Policies & Standards FINAL REPORT Review study Commission Regulation (EU) No. 814/2013 [Ecodesign] and Commission Delegated Regulation No. (EU) No. 812/2013 (Energy Label) Prepared by VHK for the European Commission July 2019 The information and views set out in this study are those of the author(s) and do not necessarily reflect the official opinion of the European Commission. Prepared by Study team: Van Holsteijn en Kemna B.V. (VHK), The Netherlands, Authors: René Kemna, Martijn van Elburg, Sanne Aarts (all VHK) Study team contact: René Kemna ([email protected]) Contract manager: Jan Viegand, Viegand Maagøe Project website: http://www.ecohotwater-review.eu Specific contract: no. ENER/C3/SER/FV 2016-537/08/FWC 2015-619 LOT2/03/SI2.753935 Title: Review Study existing ecodesign & energy labelling Water Heaters & Tanks Contract date: 9.6.2017 Consortium: Viegand Maagøe, VHK, Wuppertal Institute, Armines, Oakdene Hollins Cover: DHW storage tank with coil [picture VHK 2016-2017] _______________________ This study was ordered and paid for by the European Commission, Directorate-General for Energy. The information and views set out in this study are those of the author(s) and do not necessarily reflect the official opinion of the Commission. The Commission does not guarantee the accuracy of the data included in this study. Neither the Commission nor any person acting on the Commission’s behalf may be held responsible for the use which may be made of the information contained therein. This report has been prepared by the authors to the best of their ability and knowledge.
    [Show full text]
  • Kidwind Solar Thermal Kit Copyright ©2008
    KidWind Solar Thermal Kit Copyright ©2008 Kidwind Project 2093 Sargent Avenue Saint Paul, MN 55105 http://www.kidwind.org This work may not be reproduced by mechanical or electronic means without written permission from KidWind, except for educational uses by teachers in a classroom situation or a teacher training workshop. For permission to copy portions or all of this material for other purposes, such as for inclusion in other documents please contact Michael Arquin at the KidWind Project at [email protected]. The production of the kits and other materials related to wind energy have been generously supported by these agencies. We would like to thank the Wright Center for Science Education at Tufts University for giving us the time and space to develop a nugget of an idea into a useful project for hundreds of teachers. We would also like to thank Trudy Forsyth at National Wind Technology Center and Richard Michaud at the Boston Office of the Department of Energy for having the vision and foresight to help keep the KidWind Project going! Lastly we would like to thank all the teachers for their keen insights and feedback on making these wind turbine kits and materials first rate! KidWind Solar Thermal Kit Parts Included: • 25 ft. Tubing • 1 Black Plastic Box • 2 Paper boxes with plastic lids • 1 Plexiglas lid for plastic box • 2 Containers for water • 2V Solar Panel • Electric Water Pump • 2 Thermometers • Alligator clip wires • Copper Tube • Aluminum Tube • Black rubber tube • Supercapacitor Other Useful Materials (Not Included) • Tape (Clear, Duct, etc..) • Hot Glue • Flood Light • Tin foil/reflective materials • Insulating Material • Glitter to visualize water flow • Black paint Challenge: • How much can you heat up water in a given amount of time? • What is your maximum temperature? • What materials are best for this energy transformation (light -> heat)? KidWind Solar Thermal Kit These instructions will show you how to build the KidWind solar water heater.
    [Show full text]
  • STORAGE TANK INSTALLATION and OPERATION MANUAL
    LST-I-O 100161529_2000014416 Rev F STORAGE TANK INSTALLATION and OPERATION MANUAL ƽ WARNING The information contained in LOW LEAD CONTENT this manual is intended for use by qualified professional installers, or service technicians. Consult your local expert for proper installation or service procedures. Save this manual for future reference. Contents CONTENTS ........................................................................ 2 Drain ............................................................................. 7 HAZARD DEFINITIONS ..................................................... 2 Completing the installation ........................................... 7 1. GENERAL INFORMATION ........................................... 3 3. OPERATION ................................................................. 8 Tank construction ...................................................... 3-4 Startup procedure ..........................................................8 2. INSTALLATION ............................................................. 5 Shutdown procedure ...................................................... 8 Transporting and unpacking the unit ............................ 5 4. INSPECTION ................................................................ 9 Examining the unit ....................................................... 5 5. MAINTENANCE .......................................................... 10 Anchoring the unit ......................................................... 5 Flushing the tank .......................................................
    [Show full text]
  • Design Considerations for Hot Water Plumbing
    Design Considerations for Hot Water Plumbing Course No: M06-029 Credit: 6 PDH A. Bhatia Continuing Education and Development, Inc. 9 Greyridge Farm Court Stony Point, NY 10980 P: (877) 322-5800 F: (877) 322-4774 [email protected] DESIGN CONSIDERATIONS FOR HOT WATER PLUMBING Overview Heating water is typically the second largest use of energy in residential and commercial buildings (after space heating and cooling). Despite its resource intensity, the hot water delivery system is seldom an area of significant focus when constructing a building. As a result, many buildings today are built with poor performing, inefficient hot water delivery systems that take minutes to deliver hot water to the point of use and waste large amounts of energy and water in the process. The key to proper water heating system design is to correctly identify the quantity, temperature and time characteristics of the hot water requirement. The goal is to reduce hot water wait time to 10 seconds or less, which is considered acceptable for public lavatories. A wait time of 11 to 30 seconds is considered borderline and a wait time of 30 seconds or more is unacceptable. This course will outline the design strategies that will deliver hot water as efficiently as possible while meeting the increasingly challenging regulatory codes and user expectations. The course is divided into nine sections: • PART – 1: Estimating Hot Water Demand • PART – 2: Hot Water Generation - Water Heaters • PART - 3: Sizing Storage Water Heaters • PART - 4: Hot Water System Design • PART - 5: Hot Water Plumbing System Installation & Layouts • PART - 6: Sizing Hot Water Circulator and Piping • PART - 7: Hot Water Temperature Control • PART - 8: Facts, Formulas and Good Engineering Practices • PART - 9: Regulatory Standards and Codes PART -1 ESTIMATING HOT WATER DEMAND An adequate supply of hot water is a must for showers, kitchens, bathrooms, washing machines, dishwashers and other appliances in homes, motels, hotels or commercial buildings.
    [Show full text]