DOCSLIB.ORG

Acp 133 Supp 1(A)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Acp 133 Supp 1(A) UNCLASSIFIED ACP 133 SUPP-1(A) COMMON DIRECTORY SERVICES AND PROCEDURES SUPPLEMENT ACP 133 SUPP-1(A) COMBINED COMMUNICATIONS-ELECTRONICS BOARD (CCEB) JULY 2009 i Original UNCLASSIFIED (Reverse Blank) UNCLASSIFIED ACP 133 SUPP-1(A) FOREWORD 1. The Combined Communications-Electronics Board (CCEB) is comprised of the five member nations, Australia, Canada, New Zealand, United Kingdom and United States and is the Sponsoring Authority for all Allied Communications Publications (ACPs). ACPs are raised and issued under common agreement between the member nations. 2. ACP 133 SUPP-1 COMMON DIRECTORY SERVICES AND PROCEDURES SUPPLEMENT is an UNCLASSIFIED publication. 3. This publication contains Allied military information for official purposes only. 4. It is permitted to copy or make extracts from this publication. 5. This ACP Supplement is to be maintained and amended in accordance with the provisions of the current version of ACP198. Any amendments to this Supplement may also need to be reflected within the parent ACP. iii Original UNCLASSIFIED (Reverse Blank) UNCLASSIFIED ACP 133 SUPP-1(A) THE COMBINED COMMUNICATION-ELECTRONICS BOARD LETTER OF PROMULGATION FOR ACP 133 SUPP-1 1. The purpose of this Combined Communication Electronics Board (CCEB) Letter of Promulgation is to implement ACP 133 SUPP-1 within the Armed Forces of the CCEB Nations. ACP 133 SUPP-1 COMMON DIRECTORY SERVICES AND PROCEDURES SUPPLEMENT is an UNCLASSIFIED publication developed for Allied use and, under the direction of the CCEB Principals. It is promulgated for guidance, information, and use by the Armed Forces and other users of military communications facilities. 2. ACP 133 SUPP-1 is effective on receipt for CCEB Nations. NATO Military Committee (NAMILCOM) will promulgate the effective status separately for NATO nations and Strategic Commands. EFFECTIVE STATUS Publication Effective for Date Authority ACP 133 SUPP-1(A) CCEB On Receipt LOP/COMAG 3. This ACP will be reviewed periodically as directed by the CCEB Permanent Secretary. 4. All proposed amendments to the publication are to be forwarded to the national coordinating authorities of the CCEB or NAMILCOM. For the CCEB Principals Paul Foster P. FOSTER Major, CF CCEB Permanent Secretary v Original UNCLASSIFIED (Reverse Blank) UNCLASSIFIED ACP 133 SUPP-1(A) RECORD OF PAGE CHECKS Date By Whom Checked Date By Whom Checked Checked (Signature & Rank) Checked (Signature & Rank) NOTE: This is a supplementary sheet. IT IS NOT LISTED ON THE LIST OF EFFECTIVE PAGES FOR THIS PUBLICATION. Original UNCLASSIFIED (Reverse Blank) UNCLASSIFIED ACP 133 SUPP-1(A) RECORD OF MESSAGE CORRECTIONS Identification of Message Correction and Reference Date Date Entered By whom entered Reference Date Correction vii Original UNCLASSIFIED (Reverse Blank) UNCLASSIFIED ACP 133 SUPP-1(A) TABLE OF CONTENTS TITLE PAGE........................................................................................................... i FOREWORD ......................................................................................................... iii THE COMBINED COMMUNICATION-ELECTRONICS BOARD LETTER OF PROMULGATION............................................................................v RECORD OF MESSAGE CORRECTIONS........................................................ vii TABLE OF CONTENTS....................................................................................... ix LIST OF TABLES...................................................................................................x CHAPTER 1 .................................................................................................................... 1-1 INTRODUCTION ............................................................................................... 1-1 GENERAL AND SCOPE.................................................................................... 1-1 CHAPTER 2 .................................................................................................................... 2-1 SCHEMA DEFINITION ..................................................................................... 2-1 OVERVIEW ........................................................................................................ 2-1 ADDITIONAL INFORMATION........................................................................ 2-1 ACP 133 CLASS SUBSETS ............................................................................... 2-1 ATTRIBUTE SYNTAX DEFINITIONS ............................................................ 2-3 ATTRIBUTE DEFINITIONS ........................................................................... 2-18 ADDITIONAL ACP 133 SCHEMA RULES.................................................... 2-44 OBJECT CLASSES - ATTRIBUTES MAPPING TABLES............................ 2-50 BASE OBJECT CLASS SCHEMA DEFINITIONS......................................... 2-63 BASE OBJECT CLASS DEFINITIONS .......................................................... 2-64 BASE ATTRIBUTE SETS................................................................................ 2-65 BASE AUXILIARY OBJECT CLASS CONTENT DEFINITIONS................ 2-71 BASE ENTRY DEFINITIONS ......................................................................... 2-72 ACP 133 CLASS A OBJECT CLASS SCHEMA DEFINITIONS................... 2-86 ACP 133 CLASS A ATTRIBUTE SETS.......................................................... 2-86 ACP 133 CLASS A AUXILIARY OBJECT CLASS CONTENT DEFINITIONS............................................................................... 2-88 ACP 133 CLASS A ENTRY DEFINITIONS ................................................... 2-95 ACP 133 CLASS B OBJECT CLASS SCHEMA DEFINITIONS ................. 2-118 ACP 133 CLASS B AUXILIARY OBJECT CLASS CONTENT DEFINITIONS................................................................................................. 2-119 ACP 133 CLASS B ENTRY DEFINITIONS.................................................. 2-120 ACP 133 CLASS C OBJECT CLASS SCHEMA DEFINITIONS ................. 2-121 ACP 133 CLASS C AUXILIARY OBJECT CLASS CONTENT DEFINITIONS............................................................................. 2-122 ACP 133 CLASS C ENTRY DEFINITIONS.................................................. 2-124 ACP 133 CLASS D OBJECT CLASS SCHEME DEFINITIONS ................. 2-141 ACP 133 CLASS D OBJECT CLASS CONTENT DEFINITIONS............... 2-141 CHAPTER 3 .................................................................................................................... 3-1 FUNCTIONAL DESCRIPTORS ........................................................................ 3-1 ix Original UNCLASSIFIED UNCLASSIFIED ACP 133 SUPP-1(A) LIST OF TABLES Table 2-1 – Attribute Syntax Table Column Meanings ............................................. 2-3 Table 2-2 – Attribute Syntax Table ............................................................................... 2-17 Table 2-3 – Attribute Definition Table Column Meanings ........................................... 2-18 Table 2-4 – Attribute Definition Table.......................................................................... 2-43 Table 2-5 – Structure Rules Table ................................................................................. 2-45 Table 2-6 – ACP 133 Object Class Hierarchy Table..................................................... 2-47 Table 2-7 – ACP 133 Auxiliary Object Class Association Table.................................. 2-49 Table 2-8 – Object Classes – Attributes Mapping Tables ............................................. 2-56 Table 2-9 – Object Classes – Attributes Mapping Tables ............................................. 2-62 Table 2-10 – Object Class Table Column Meanings..................................................... 2-64 Table 2-11 – Locale Attribute Set.................................................................................. 2-65 Table 2-12 - Organizational Attribute Set ..................................................................... 2-66 Table 2-13 – Postal Attribute Set................................................................................... 2-67 Table 2-14 – Telecommunication Attribute Set ............................................................ 2-68 Table 2-15 – Base Object Class Definitions.................................................................. 2-70 Table 2-16 – PKI Certification Authority Object Class ................................................ 2-71 Table 2-17 – PKI User Auxiliary Object Class ............................................................. 2-72 Table 2-18 – Alias Entry................................................................................................ 2-72 Table 2-19 – Country Entry ........................................................................................... 2-73 Table 2-20 – CRL Distribution Point Entry................................................................... 2-74 Table 2-21 – Device Entry............................................................................................. 2-75 Table 2-22 – Group of Names Entry.............................................................................. 2-76 Table 2-23 – Inet Org Person Entry............................................................................... 2-79 Table 2-24 – Locality Entry........................................................................................... 2-80 Table 2-25 – Organization Entry ................................................................................... 2-81 Table
Load more

Recommended publications
  • Automation Systems and Integration — Object-Process Methodology
    © ISO 2014 – All rights reserved ISO TC 184/SC 5 N 522 Date: 2014-04-29 ISO/PDPAS 19450 ISO TC 184/SC 5/WG 1 N 522 Secretariat: ANSI Automation systems and integration — Object-Process Methodology Systèmes d'automatisation et intégration -- Méthodologie du processus-objet Document type: Publicly Available Specification Document subtype: Document stage: (20) Preparatory Document language: E STD Version 2.1c2 ISO/PDPAS 19450 Copyright notice This ISO document is a working draft or committee draft and is copyright-protected by ISO. While the reproduction of working drafts or committee drafts in any form for use by participants in the ISO standards development process is permitted without prior permission from ISO, neither this document nor any extract from it may be reproduced, stored or transmitted in any form for any other purpose without prior written permission from ISO. Requests for permission to reproduce this document for the purpose of selling it should be addressed as shown below or to ISO's member body in the country of the requester: [Indicate the full address, telephone number, fax number, telex number, and electronic mail address, as appropriate, of the Copyright Manger of the ISO member body responsible for the secretariat of the TC or SC within the framework of which the working document has been prepared.] Reproduction for sales purposes may be subject to royalty payments or a licensing agreement. Violators may be prosecuted. Violators may be prosecuted. ii © ISO 2014 – All rights reserved ISO/PDPAS 19450 Contents Page Foreword
    [Show full text]
  • Europe Co P Er Anu Ctu Ers Associ On
    EUROPE CO P ER ANU CTU ERS ASSOCI ON l June 1986 Free copies of this document are available from EC:\lA, European Computer :\Iannfadnrers Association I H Rue dn Hhi'me 1201 Geneva (Switzerland) BRIEF HISTORY The first version of the language BASIC, acronym for Beginner 1 s All-purpose Symbolic Instruction Code, was produced in June 1965 at the Dartmouth Col lege in the USA. In January 1978, ECMA published a Standard for Minimal BASIC, ECMA-55, prepared in coopera­ tion with ANSI X3J2 and fully compatible with the corresponding ANSI standard . This Stan­ dard ECMA-55 served as a basis for the ISO Standard on Minimal BASIC. With the continuation of the work, a draft Standard for full BASIC was agreed by ANSI X3J2 , EWICS TC2 and ECMA/TC21 in January 1985 . This draft is composed of a mandatory Core module and five optional modules . Starting from this draft, ECMA/TC21 prepared a Standard for fully defined subsets of the language . These subsets , called ECMA BASIC-! and ECMA BASIC-2, are designed for business applications , requiring extended file facilities . ECMA BASIC-1 has no exception handling facilities and a reduced set of file operations . In addition, all the keywords in ECMA BASIC-1 are reserved words, reducing the comp lexity of the interpreter or compiler needed . ECMA BASIC-2 provides full exception handling capabilities , full file operations and fixed decimal capabilities . The set of reserved words is minimal . Both subsets provide the full flow control capabilities provided in the ANSI standard . An additional module (ECMA GRAPHICS) provides a minimum of graphic capabilities and can be used with either subset .
    [Show full text]
  • International Standard Iso 37500:2014(E)
    INTERNATIONAL ISO STANDARD 37500 First edition 2014-11-01 Guidance on outsourcing Lignes directrices relatives à l’externalisation Reference number ISO 37500:2014(E) --`,,,,,,,,```,,,,`,,``,,,``,```-`-`,,`,,`,`,,`--- © ISO 2014 Provided by IHS Licensee=University of Alberta/5966844001, User=sharabiani, shahramfs No reproduction or networking permitted without license from IHS Not for Resale, 11/09/2014 06:14:27 MST ISO 37500:2014(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. ISOTel. copyright+ 41 22 749 office 01 11 Case postale 56 • CH-1211 Geneva 20 FaxWeb + www.iso.org 41 22 749 09 47 E-mail--`,,,,,,,,```,,,,`,,``,,,``,```-`-`,,`,,`,`,,`--- [email protected] Published in Switzerland ii © ISO 2014 – All rights reserved Provided by IHS Licensee=University of Alberta/5966844001, User=sharabiani, shahramfs No reproduction or networking permitted without license from IHS Not for Resale, 11/09/2014 06:14:27 MST ISO 37500:2014(E) Contents Page Foreword ..........................................................................................................................................................................................................................................v
    [Show full text]
  • October 16, 2014 VIA ELECTRONIC FILING
    October 16, 2014 VIA ELECTRONIC FILING Honorable Kimberly D. Bose, Secretary Federal Energy Regulatory Commission 888 First Street, NE Washington, D.C. 20426 Re: ISO New England Inc., Filing of 2015 Capital Budget and Revised Tariff Sheets for Recovery of 2015 Administrative Costs; Docket No. ER15-_______________________ Dear Secretary Bose: Pursuant to Section 205 of the Federal Power Act, Part 35 of the Rules and Regulations of the Federal Energy Regulatory Commission (the “Commission”), Section 12 of the Participants Agreement among ISO New England Inc., the New England Power Pool and any Individual Participants,1 and Section IV.B.6.1 of the ISO New England Inc. Transmission, Markets and Services Tariff (the “Tariff”),2 ISO New England Inc. (the “ISO” or “ISO-NE”) hereby submits its capital budget for calendar year 2015 (the “2015 Capital Budget”) and a revised Section IV.A of the Tariff to reflect the collection of its administrative costs for calendar year 2015 (the “2015 Administrative Expenses Tariff”). The ISO requests that the Commission accept the 2015 Capital Budget and the 2015 Administrative Expenses Tariff as filed, effective January 1, 2015. Because the ISO is a non-profit entity without equity, it relies totally on collections under its Tariff to fund its operational expenses, including through depreciation. For this reason, the ISO is not in a position to make refunds should the Commission accept the 2015 Capital Budget or the 2015 Administrative Expenses Tariff for filing but set them for hearing subject to refund. That is, the only “refunds” that can be paid to ISO Customers during 2015 would have to be funded by additional charges to other Customers.
    [Show full text]
  • Technical Specification Iso/Ts 19159-1:2014(E)
    This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-917587 TECHNICAL ISO/TS SPECIFICATION 19159-1 First edition 2014-07-15 Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 1: Optical sensors Information géographique — Calibration et validation de capteurs de télédétecion — Partie 1: Capteurs optiques Reference number ISO/TS 19159-1:2014(E) © ISO 2014 This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-917587 ISO/TS 19159-1:2014(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form orthe by requester. any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of ISOTel. copyright+ 41 22 749 office 01 11 CaseFax + postale 41 22 749 56 •09 CH-1211 47 Geneva 20 Web www.iso.org E-mail [email protected] Published in Switzerland ii © ISO 2014 – All rights reserved This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-917587 ISO/TS 19159-1:2014(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv
    [Show full text]
  • Indian Standard INFORMATION and DOCUMENTATION BIBLIOGRAPHIC REFERENCES PART 1 CONTENT, FORM and STRUCTURE
    IS 2381 (Part 1) : 2009 ISO 690 : 1987 (PREVIEW) Indian Standard INFORMATION AND DOCUMENTATION BIBLIOGRAPHIC REFERENCES PART 1 CONTENT, FORM AND STRUCTURE 1. Scope and field of application This International Standard specifies the elements to be included in bibliographic references to published monographs and serials, to chapters, articles, etc. in such publications and to patent documents. It sets out a prescribed order for the elements of the reference and establishes conventions for the transcription and presentation of information derived from the source publication. This International Standard is intended for use by authors and editors in the compilation of references for inclusion in a bibliography, and in the formulation of citations within the text corresponding to the entries in that bibliography. It does not apply to full bibliographic descriptions as required by librarians, descriptive and analytical bibliographers, indexers, etc. This International Standard covers references to published material in both print and non-print form. It does not, however, apply to references to manuscripts or other unpublished material. 2 References ISO 4, Documentation – Rules for the abbreviation of title words and titles of publications. ISO 9, Documentation – Transliteration of Slavic Cyrillic characters into Latin characters. ISO 233, Documentation – Transliteration of Arabic characters into Latin characters. ISO 259, Documentation – Transliteration of Hebrew characters into Latin characters. ISO 832, Documentation – Bibliographic references – Abbreviations of typical words . ISO 843/R, Documentation – Transliteration of Greek characters into Latin characters. ISO 2014, Writing of calendar dates in all-numeric form. ISO 2100, Documentation – International standard book numbering (ISBN). ISO 3166, Codes for the representation of names of countries.
    [Show full text]
  • Levelling the Playing Field 24
    #106 focusYour gateway to International Standards Levelling the playing field 24 ISOfocus September-October 2014 – ISSN 2226-1095 ISOfocus, the magazine of the International Organization for Standardization, is published six times a year. You can discover more content on our Website at iso.org/isofocus, or by staying connected with us on : TWITTER FACEBOOK googleplusYoutubeFlickrlinkedin 6 Director of Marketing, Communication and Information | Nicolas Fleury Head of Communication and Content Strategy | Katie Bird Editor-in-Chief | Elizabeth Gasiorowski-Denis Editors | Maria Lazarte, Sandrine Tranchard Copy editor and Proofreader | Vivienne Rojas Designers | Xela Damond, Pierre Granier, Alexane Rosa Translators | Cécile Nicole Jeannet, Anita Rochedy, Catherine Vincent Subscriptions and back issues If you enjoy ISOfocus, you can subscribe and download the pdf for free, or purchase single hard-copy issues through our Website iso.org/isofocus. You can also contact our customer service at [email protected]. Contributions You can participate in creating this magazine. If you think your contribution can add value to any of our sections, please get in touch at [email protected]. All content in this magazine is © ISO, 2014. No part can be reproduced without the prior written permission of the publisher. If you wish to do so, please contact us at [email protected]. Views expressed are those of the respective contributors and are not necessarily those of ISO or any of its members. 44 This magazine is printed on certified FSC ® paper. #106 4 Social feed 16 Our first Tweetchat ! 6 Show me the money ! Calculating the benefits of standards has just got easier. ISOfocus 16 Enter the first cyborg-type robot September-October 2014 What if cyborgs were real ? 22 Levelling the playing field… in love and war Celebrate World Standards Day on 14 October 2014.
    [Show full text]
  • Economic Benefits of Standards, I Could Not Put It Down Jpyuntil I Had Finished It
    EUR CHF USD GBP AUD CNY THB CAD ARS BRL RUB JPY INR NZD EUR CHF USD GBP Economic benefits AUD CNY of standards THB CAD ARS BRL RUB EUR CHF USD GBP ZWD, AUDZWR, ZWL, VND, GRD, AMD, XDR, CVE, ALL,EEK, HNL, ISK, SLL, NOK, MDL, SKK, ROL, SEK, RON, CZK, BGL, CSK, BGN, GMD, ZMK,CHW,MZE,FJD,AFA,MKD, AOA, HTG, GYD,CNYPTE,AFN, DZD, AOK, PYG, TPE,HKD,XAG, BHD, UAH,EUR,AON, SBD,MGA, IQD, PGK, CHE, AOR,JMD, THB, JOD, LAK,ANG, MMK,BBD, PAB, KWD, HRK, AWG, LRD,ETB,GEL, LYD, MWK, NLG, NAD,VEB,LVL, RSD, GBP,GIP,FIM,SZL,HUF,NZD,VEF,CSD, IEP,LSL, MZM, MTL, BOB,ADF,SDD,SGD, LBP,AZM, ITL, BEF, MZN,TND,SRD,GHC, SHP, SML,AZN, BIF, YUD, TWD,CRC,BOV, SDP, KMF,VAL,TMM, YUM, TTD,SVC,ERN, SDG, LTL,CDF, TMT, USD, AED, NIC,NGN, CYP, SYP,DJF, DEM, USS,MAD,NIO, EGP, FRF,BTN,TRL, BAM, USN,DKK,GNF,STD,FKP, XAU,TRY, LUF,AUD, MGF,THB BSD, RWF, BZD, CHF, BMD, XOF, BND, XAF, KYD, XPF, CAD, XFO, XCD,XFU, CADEconomic benefits ARS of standards BRL RUB JPY INR NZD International Organization for Standardization ISO Central Secretariat 1, chemin de la Voie-Creuse Case postale 56 CH - 1211 Genève 20 Switzerland www.iso.org © ISO, 2014 All rights reserved ISBN 978-92-67-10620-5 Foreword EUR Demonstrating CHFand Communicating USDthe Value of Standards GBP Many organizations from the private and public sector use standards and participate in standards development.
    [Show full text]
  • International Standard Iso 19600:2014(E)
    INTERNATIONAL ISO STANDARD 19600 First edition 2014-12-15 Compliance management systems — Guidelines Systèmes de management de la conformité — Lignes directrices Reference number ISO 19600:2014(E) --`,,,```,`,,,`,````,,``,,,,```-`-`,,`,,`,`,,`--- Copyright International Organization for Standardization © ISO 2014 Provided by IHS under license with ISO Licensee=University of Alberta/5966844001, User=gh, ramin No reproduction or networking permitted without license from IHS Not for Resale, 01/03/2015 08:41:27 MST ISO 19600:2014(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. ISOTel. copyright+ 41 22 749 office 01 11 Case postale 56 • CH-1211 Geneva 20 FaxWeb + www.iso.org 41 22 749 09 47 E-mail [email protected] Published in Switzerland--`,,,```,`,,,`,````,,``,,,,```-`-`,,`,,`,`,,`--- Copyright Internationalii Organization for Standardization © ISO 2014 – All rights reserved Provided by IHS under license with ISO Licensee=University of Alberta/5966844001, User=gh, ramin No reproduction or networking permitted without license from IHS Not for Resale, 01/03/2015 08:41:27 MST ISO 19600:2014(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv
    [Show full text]
  • International Standard 215
    International Standard 215 INTERNATIONAL-ORGANIZAT,ON FOR STANDARDIZATION*MElK~YHAl’O~HAR OPI-AHM3A~MR fl0 CTAH~APTkl3A~MM~RGANISATlON INTERNATIONALE DE NORMALISATION Documentation - Presentation of contributions to periodicals and other serials Documentation - Presen tation des articles de p&iodiques et au tres publica tions en s&ie First edition - 1986-11-15iT eh STANDARD PREVIEW (standards.iteh.ai) ISO 215:1986 https://standards.iteh.ai/catalog/standards/sist/a4a136d4-8bcf-4c61-b11c- 0b3b6552aecd/iso-215-1986 UDC 655535.563: 05 + 07 Ref. No. ISO 2154986 (E) -ii Descriptors : documentation, serials, periodicals, article of periodicals, presentation. Price based on 5 pages Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bedies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodiesiTe voting.h S TANDARD PREVIEW International Standard ISO 215 was prepared by Technical Committee ISO/TC 46, Documen ta tion. (standards.iteh.ai) lt cancels and replaces ISO Recommendation R 215-1961, of IwhichSO 2 15it: 1constitutes986 a technical revision. https://standards.iteh.ai/catalog/standards/sist/a4a136d4-8bcf-4c61-b11c- 0b3b6552aecd/iso-215-1986 Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
    [Show full text]
  • Iso 13482:2014
    Irish Standard I.S. EN ISO 13482:2014 Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) © CEN 2014 No copying without NSAI permission except as permitted by copyright law. This is a free 13 page sample. Access the full version online. I.S. EN ISO 13482:2014 Incorporating amendments/corrigenda/National Annexes issued since publication: The National Standards Authority of Ireland (NSAI) produces the following categories of formal documents: I.S. xxx: Irish Standard — national specification based on the consensus of an expert panel and subject to public consultation. S.R. xxx: Standard Recommendation — recommendation based on the consensus of an expert panel and subject to public consultation. SWiFT xxx: A rapidly developed recommendatory document based on the consensus of the participants of an NSAI workshop. This document replaces/revises/consolidates the NSAI adoption of the document(s) indicated on the CEN/CENELEC cover/Foreword and the following National document(s): NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. This document is based on: Published: EN ISO 13482:2014 2014-02-05 This document was published ICS number: under the authority of the NSAI and comes into effect on: 25.040.30 2014-02-15 NOTE: If blank see CEN/CENELEC cover page This is a free 13 page sample. Access the full version online. NSAI T +353 1 807 3800 Sales: 1 Swift Square, F +353 1 807 3838 T +353 1 857 6730 Northwood, Santry E [email protected] F +353 1 857 6729 Dublin 9 W NSAI.ie W standards.ie Údarás um Chaighdeáin Náisiúnta na hÉireann I.S.
    [Show full text]
  • Diagrams for the Chemical and Petrochemical Industry Part 1: Specification of Diagrams BS EN ISO 10628-1:2015 BRITISH STANDARD
    BS EN ISO 10628-1:2015 BSI Standards Publication Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams BS EN ISO 10628-1:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 10628-1:2015. It is identical to ISO 10628-1:2014. Together with BS EN ISO 10628-2:2012, it supersedes BS EN ISO 10628:2001, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TDW/4, Technical Product Realization. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. © The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 77622 9 ICS 01.110; 71.020; 75.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2015. Amendments/corrigenda issued since publication Date Text affected EUROPEAN STANDARD EN ISO 10628-1 NORME EUROPÉENNE EUROPÄISCHE NORM January 2015 ICS 01.110; 71.020; 75.020 Supersedes EN ISO 10628:2000 English Version Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO 10628-1:2014) Schémas de procédé pour l'industrie chimique et Schemata für die chemische und petrochemische Industrie pétrochimique - Partie 1: Spécification des schémas de - Teil 1: Spezifikation der Schemata (ISO 10628-1:2014) procédé (ISO 10628-1:2014) This European Standard was approved by CEN on 16 August 2014.
    [Show full text]