Dr. Chenn Qian Zhou Purdue University Northwest (PNW), Hammond, IN 46323 Phone: 219-989-2665 (o) or 219-644-8239 (c); E-mail: [email protected];
EDUCATION Ph.D. Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA, 1991 M.S. Power Engineering, Nanjing University of Aeronautics & Astronautics, China, 1984 B.S. Power Engineering, Nanjing University of Aeronautics & Astronautics, China, 1982
PROFESSIONAL EXPERIENCE Purdue University Northwest (formerly Purdue University Calumet) - Hammond, IN NIPSCO Distinguished Professor of Engineering Simulation April 2020 – present Founding Director, Steel Manufacturing Simulation and Visualization Consortium August 2015 – present Founding Director, Center for Innovation through Visualization and Simulation July 2009 – present Coordinator, English Training in Engineering (ETIE) Program August 2006 – present Interim Associate Vice Chancellor for Research and Graduate Studies July 2012 – August 2015 Director, Engineering Outreach August 2011 – June 2012 Department Head of Mechanical Engineering July 2005 – July 2011 Interim Department Head of Electrical and Computer Engineering July 2005 – June 2009 Engineering Graduate Program Director August 2001 – June 2005
Professor, Mechanical Engineering August 2000 – present Associate Professor, Mechanical Engineering July 1997 – June 2000 Assistant Professor, Mechanical Engineering August 1994 – June 1997
Purdue University - West Lafayette, IN Professor by Courtesy, Mechanical Engineering August 2008 – present
Argonne National Laboratory - Argonne, IL Summer Faculty Appointment and Special Term Appointment May 1995 – Feb. 2006 Developed computational fluid dynamics (CFD) software packages and multi-phase reacting flow models of petroleum fluid catalytic cracking riser reactors, glass furnaces, and aluminum furnaces
NOXSO Corporation - Pittsburgh, PA Senior Research Engineer March 1991 – Aug. 1994 Managed a $1.5 million research project on an experimental study of NOx recycle Conducted exploratory research on air pollution control
Carnegie Mellon University, Pittsburgh, PA Research Assistant, Mechanical Engineering Department Aug. 1987 – Feb. 1991 Performed experimental and numerical study for developing a novel NOx reduction technique by using plasma injection into a combustor Developed a “group model” for the numerical modeling of sprays
Nanjing University of Aeronautics & Astronautics, China Lecture, Power Engineering Department Feb. 1984 – Aug. 1987 Conducted research on sprays and gas turbine combustors Taught combustion lab and supervised 10+ undergraduate students for B.S. thesis and 40+ undergraduate students for industrial practices in an aero-engine manufacturing company
HONORS AND AWARDS Commended in December 2017 Congressional Record “as the recipient of the 2017 Gerald I. Lamkin Fellow for Innovation and Service Award” together with new fellows “for their truly remarkable
Chenn Q. Zhou Page 1 contributions to the community of Northwest Indiana and their unwavering commitment to cultivate a culture of innovation”, Vol. 163, No. 198, December 5, 2017 Gerald I. Lamkin Fellow Award for Innovation & Service, The Society of Innovators of Northwest Indiana (NWI), October 2017 PNW Outstanding Faculty Awards – Teaching (1999), Research, (1999), Sponsored Research (2006), and Engagement (March 2017) Best Paper Awards: . AIST Hunt-Kelly Outstanding Paper Award -1st Place (“Investigation of Co-Injection of Natural Gas and Pulverized Coal in a Blast Furnace”, one of co-authors), May 2017 (AIST: Association of Iron and Steel Technology) . AIST Josef Kapitan Best Paper – Ironmaking (“Investigation of Dual Lance Designs for Pulverized Coal and Natural Gas Co-Injection”, one of co-authors), May 2017 . AIST Computer Applications Best Paper (“Numerical Simulation of a Walking Beam Type Steel Slab Reheating Furnace”, one of co-authors), May 2017 . 8th International Conference on Physical and Numerical Simulation of Materials Processing, Models and Methods (“Integration of Advanced Simulation and Visualization for Material Processing” one of co-authors), October 2016 . AIST Josef Kapitan Best Paper – Ironmaking (“Investigation of Co-Injection of Natural Gas and Pulverized Coal in a Blast Furnace”, one of co-authors), May 2016 . 33rd International Conference on Thermoelectrics Outstanding Poster Award (“Cost effective topping thermoelectric power generation on coal fired power plants”, one of co-authors), July 2014 . AIST Computer Applications Best Pape (“Evaluation of Internal Conditions in a Blast Furnace Hearth Using a 3-D CFD Model”, one of co-authors), May, 2006 . AIST Josef Kapitan Best Paper Award – Ironmaking (“3-D Computational Modeling of a Blast Furnace Hearth”, one of co-authors), May 2005 . 2005 AISI Medal Award (“Investigation of Tuyere Nose Failures at U.S. Steel Great Lakes B2 Blast Furnace”, one of co-authors). It is awarded annually for a paper having special merit. It is judged on: potential value to future prosperity of the industry, technical excellence and originality, effective communication, and breadth of interest to AISI members. (AISI: American Iron and Steel Institute) “Interview with Chenn Q. Zhou AIST Foundation Trustee,” featured article in AIST Iron and Steel Technology Magazine, October 2016 The Most Influential Women in Northwestern Indiana, Finalist, October, 2015 and 2011 One of 10 innovators highlighted by the Society of Innovators of NWI as part of World Creativity and Innovation Week, March, 29, 2015 (selected from around 300 members) One of 12 Most Influential Over 50 by Northwest Indiana Business Quarterly Magazine, Feb. 2015 “Leveraging the Power of Visualization to Advance Steel Manufacturing,” featured article in AIST Iron and Steel Technology Magazine, October 2014 “Virtual Innovation,” featured article in the Office of the Purdue University Vice President for Research Annual Report, December 2012 2012 Chanute Prize for Team Innovation Co-Recipient for “the Center for Innovation for Simulation and Visualization” (Team Leader), the Society of Innovators of NWI, September 2012 “Innovating the Future: Chenn Zhou,” featured article in the NWI Business Quarterly, Summer-Fall 2012 “Purdue Profiles: Chenn Zhou,” featured article in the Spotlight, Purdue Today, October 25, 2011 Seed for Success Award, Purdue University, 2010 & 2011 “Chinese in America: Chenn Zhou,” featured article in Blog Archive at America.gov, May 19, 2010 AIME Keynote & AIST J. Keith Brimacombe Memorial Lecture Award, May 2010 (AIME: American Institute of Mining, Metallurgical, and Petroleum Engineer) (This award is given every other year to an individual dedicated to the steel industry) 2010 AIST J. Keith Brimacombe Memorial Lecture Award 2010 Chanute Prize for Team Innovation Co-Recipient for “Exploration Earth: Mission Ocean” (One of Team Members), the Society of Innovators of NWI, October 2010
Chenn Q. Zhou Page 2 Advisor Award for Activities and Service Excellence, by Purdue University Calumet Student Organizations, 2007 and 2010 “100 Asians Working for a Better Indiana” selected by the Asian Access News Magazine, Vol. 1, Issue 7, September - October 2007 “Above and Beyond,” Certificate of Appreciation, by PUC Student Organizations, 2006 and 2008 Innovation Fellow, The Society of Inventors of NWI, October 2005 R&D 100 Award (Golchert, B., S.A. Lottes, M. Petrick, C.Q. Zhou, and S.L. Chang, GFM: Glass Furnace Model), “Through the Looking Glass,” R&D Magazine, Vol. 46, No. 9, 2004 Fellow, American Society of Mechanical Engineers (ASME), 2003 Outstanding Northwest Indiana Researcher, Northwest Indiana Chapter of Sigma Xi, 2001 ME “Gold” Professor, Department of Engineering, Purdue University Calumet, 1998
PUBLICATIONS AND PRESENTATIONS (see details in Appendix A) Patents and Copyrights: 9 Book Editing and Contributions: 8 Total technical papers and abstracts: 439 - Articles in Refereed Journals: 73, in Technical Magazines: 19, and in Refereed Conference Proceedings: 243; Papers or Abstracts in Non-Refereed Conferences: 102 Invited keynotes, Panel Talks, Presentations, Seminars, and Workshops: 144
RESEARCH GRANTS Received $26,500,000+ grants for 170+ projects as a PI or Co-PI from (1995 – Sept. 2019) Participated as a senior personnel in various funded research projects Collaborated with a large number of experts in 130+ organizations from academia, national laboratories, industries, and government agencies in various disciplines
TEACHING Taught various undergraduate and graduate courses such as: Air Pollution Control, Combustion, Computational Fluid Dynamics, Fluid Dynamics, Heat Transfer, Numerical Heat and Mass Transfer, etc. Received excellent student evaluations Supervised or co-supervised a large number of senior design, undergraduate research, Master’s Thesis, and Independent Study projects. 1,500+ student research positions at CIVS since 2009. Supervised or co-supervised 8 Ph.D. Thesis
COMMUNITY ENGAGEMENT AND SERVICE
Major Community and Board Activities Membership in Boards and Committees of Association of Iron and Steel Industry (AIST) . AIST Foundation Trustee, 2011-2017 . AIST Midwest Chapter Executive Board, 2009 – present . AIST Foundation University-Industry Relations Roundtable, 2011 – present . AIST Digital Transformation Taskforce, 2018 - present . Kent D. Peaslee Junior Faculty Award Committee, 2015 – present . Steel Research & Applications Grant Committee, 2015 – present . Steel Curriculum Development Committee, 2013 – present . Steel Scholarship Committee, 2013 – present . Computer Applications Technology Committee, 2010 – present . Energy & Utilities Technology Committee, 2010 – present Member of the Honors & Awards Committee, Heat Transfer Division, American Society of Mechanical Engineering (ASME), 2012 – 2018 Chair (2007-2010) and Vice Chair (2004-2007) of Fire and Combustion (K-11) Committee Member of the CESMII RFP2-W2 Proposal Evaluation Board, April 2020 - present Member of the International Advisory Board of Steel Research International Journal, March 2020 - present
Chenn Q. Zhou Page 3 Headline guest for Girl (Em)Powered Event at Portage High School, Indiana, October 19, 2019 Q&A Panel at Girls STEAM Ahead Luncheon, Homewood, IL, February 25, 2017 Panelist at the Annual Science Careers in Search of Women (SCSW) Conference, Argonne National Laboratory, 2006 – 2017 Institution Representative of Engineering Research Council, American Society for Engineering Education, 2005 – present Member of Advisory Board for the Pre-Engineering Program of IVY TECH, Indiana, 2009 – 2013 Program Director and Student Advisor for the Annual Chinese New Year Celebration co-organized by PUC Chinese Student Association and Northwest Indiana Chinese School/Chinese Network, 2005 - 2014 Judge of “The Big Sell,” Northwestern Indian, March 2012 Associate Editor, Journal of Thermal Science and Engineering Applications, 2009 – 2012 Judge of the Society of Inventors, Northwest Indiana, 2007 - 2018 Panelist at the Middle School Daughter/Parent STEM Event, sponsored by DuPage Regional Office of Education, May 2011 Founding member of Council on Manufacturing & Engineering Competitiveness, NW Indiana, 2008 – 2010 President (2007-2008) and Vice President (2006-2007), Chinese in America Thermal Engineering Association Member of Board of Director of Indiana Economic Development Council, 2004-2006 “Re-Tooling the Region through advanced technology Partnerships,” invited presentation at Northwest Indiana World Trade Council Annual Meeting, September 2003
Conference Organizations and Peer Review Activities Conference Chair or Conference Technical Program Chair: . 8th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2019), Toronto, Canada, August 13-15, 2019 . Heat Transfer Division participation in the 2012 ASME Joint Heat Transfer, Fluids and Nano, Micro and Minichannels Conference (HTFNMM 2012), June 2012 . International Energy and Environment Conference, Changsha, China, 2010 . Energex 2000, an international conference held by IEF in July 2000 (around 700 attendees) International Scientific Committee or Organizing Committee Member: . The 16th & 13th International Heat Transfer Conference, Beijing, China, August 2018 & Washington, DC, August, 2010 . 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking, Qingdao, China, August, 2017 . 1st TMS Summit on Integrated Manufacturing and Materials Innovations, November, Pittsburgh, 2015. . ICSTI 2015 - The 7th International Congress on the Science and Technology of Ironmaking, Cleveland, May 2015 . 2011 WINVR (World Innovation of Virtual Reality Conference), Italy, June 2011 . 6th International Symposium on Multiphase Flow, Heat Mass Transfer, and Energy Conversion, Xian, China, July 200 . 2009 Renewable Energy and Thermal Physics Conference, Beijing, China, May 2009 . Program committee member of American Power Conference (1999-2001) Track Chair or Topic Organizer: . 5th ASME Micro/Nanoscale Heat & Mass Transfer International Conf., January, Singapore, Jan. 2016 . 4th ASME Micro/Nanoscale Heat & Mass Transfer International Conf., Hong Kong, China, Dec., 2013 . 2nd Asian-US-European Thermophysics Conference - Thermal Science for Sustainable World, Hong Kong, China, Jan. 3-6, 2012 . 2011 WINVR (World Innovation of Virtual Reality Conference), Italy, June 2011 . 2009, 2008, 2007, 2006, 2005, 2004, 2003 International Mechanical Engineering Congress and Exposition (IMECE) as well as the 2003 Summer Heat Transfer Conference . 2nd International Energy Conversion Engineering Conference, Province, Rhode Island, August, 2004 Session Chair:
Chenn Q. Zhou Page 4 . 3rd Thermal and Fluids Engineering Conference, Fort Lauderdale, FL, March 2018 . 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking, Qingdao, China, August 16-18, 2017 . AISTech 2017, 2016, & 2015 . Iron Making and Raw Materials: Technology to Prolong Campaign Life of Blast Furnace, Bao-steel BAC 2015, Shanghai, China, Oct 21-23, 2015 . 2nd Asian-US-European Thermophysics Conference - Thermal Science for Sustainable World, Hong Kong, China, Jan. 3-6, 2012 . 4th International Congress on the Science and Technology of Ironmaking, Japan, November 2006 . 2nd International Energy Conversion Engineering Conference, Province, Rhode Island, August, 2004 . National Heat Transfer Conferences (2003, 2001, 2000, 1999) . IMECE 2004, 2003, 2000,1999, 1998, 1997 . 1998 Joint AIAA/ASME Thermophysics and Heat Transfer Conference . 1997 Pittsburgh Coal Conference . 1996 Central States Section Meeting of the Combustion Institute Peer review for Purdue Distinguished PhD Dissertation nomination for national competition, June 2020 Peer review for CESMII RFP2-W2 Proposals, April 2020 Panel review member for NSF RET proposals, 2019 Review of proposals for the Research Council of Norway, 2018 Panel review member for NSF Graduate Research Fellowship, 2008, 2009, 2010 Panel review member for DOE Energy’s Advanced Research Projects Agency-Energy (ARPA-E), 2009 Peer review of papers for a number of journals
Service Activities at Purdue University and Purdue University Northwest Member of Purdue University Graduate Council, 2019 – present Chair, Leadership Team of Mechanical and Civil Engineering Department (2018 – 2019) Faculty Advisor, PNW Materials Advantage Student Chapter (2017 – present) Member of PNW Executive Director of Global Engagement Search Committee (2017-2018) Member of Dean’s Search Committee for the College of Science and Engineering (2016) Member of Task Force for F&A Distributions (2015) Member of Chancellor Search Committees (2011, 2001) Advisor of PUC Chinese Student Association (2005 - 2014) Founder and Director of English Training in English (ETIE) program (2006-present) Advisor of the Society of Women Engineer (SWE), student chapter of PUC (1996 - 2006) Advisor of Student Association of Graduate Engineers (SAGE), PUC (2003-2005) Founding Member of PUC Research Board (2005-2008) The STEM (Science, Technology, Engineering, and Mathematics) Committee (Co-Chair from 1995-1996 and Member from 1996 - 1999) EMS Vision Statement Committee (1998-1999) Institutional Liaison, Northwest Indiana Chapter, Sigma Xi, The Scientific Research Society (1997-1998) Member of University Vision Committee (1997-1998) Judge of the Calumet Region Science Fair in a number of years Member of various other committees
Major Administrative and Service Activities at PNW – see Testimonials on Appendix C (Note: Many are teamwork under my leadership)
Founding Director, Steel Manufacturing Simulation and Visualization Consortium (2016 – present) (https://steelconsortium.org/?_ga=2.70592403.2040526851.1571194579-1223414484.1566441642) 16 member companies in North America and Europe (steel producers and suppliers) 8 research areas: workplace safety, energy efficiency, operation efficiency, maintenance and reliability, environments, workforce development, raw materials, and smart manufacturing
Chenn Q. Zhou Page 5 8 on-going project topics: safety training simulators, blast furnace, electric arc furnace, reheat furnace, ladle, primary cooling and secondary cooling of casting Developed a technology roadmap Monthly Project Technical Committee (PTC) WebEx meetings Semi-annual and annual meetings for Board and PTC members Founding Director, Center for Innovation through Visualization and Simulation (2009 – present) (https://centers.pnw.edu/civs/) $19 + million external funding $40+ million savings for companies from 5 out of 360+ projects which are allowed for public release 1570+ graduate and undergraduate students employed and mentored 10,200+ students used CIVS virtual simulators 140+ external organizations collaborated with CIVS 140+ Purdue Northwest faculty and staff involved 150+ student awards and grants 480+ news articles on CIVS K-12 Outreach: 100+ events and 10,000 + students 34,900+ visitors from region, nation, and other countries Recognized by ABET as one of two institutional strengths in 2015 Coordinator, English Training in Engineering (ETIE) Program (2006 – present) Recognized as one of the strengths in the 2015 ECE ABET visit report Enrolled 568 students from 2006 to 2018, generating $7+ million tuition incomes Retained around 70% students to PNW graduate programs Established partnerships with more than 20 Chinese Universities Increased engineering graduate program enrollments Helped faculty research projects Funded several full time visiting faculty members, graduate assistantships, faculty professional development and equipment for engineering programs Enriched campus life and community events through the annual Chinese New Year Celebration, Moon Festival etc. Interim Associate Vice Chancellor for Research and Graduate Studies (2012 – 2015) Increased student presenters in the Annual Student Research Day by 100% Established a number of new programs to promote faculty research and scholarly activities such as annual Faculty Research and Scholarship Day (with about 50% faculty participation), Coffee Hours, One-on-one Consultation, Research Development program, etc. Supported faculty and student research through internal grants Increased number of external funding proposals by 74% and the amount of external funded grants by 33% Worked with Purdue Graduate School to establish new degrees (e.g. DNP, MSME, MSECE) and new graduate courses Head of Mechanical Engineering Department (2005 – 2011) and Interim Head of Electrical and Computer Engineering Department (2005 -2009) Developed 4 new undergraduate engineering degree programs: Bachelor of Science in Civil Engineering (BSCE), Computer Engineering (BSCmpE), Electrical Engineering (BSEE), and Mechanical Engineering (BSME). Among the four programs, BSCE was completely new and the other three evolved from the existing interdisciplinary engineering degree (BSE). Ensured successful ABET accreditations Established articulated agreements with Ivy Tech and a number of foreign universities, resulting in transfer students from Ivy Tech and Chinese Universities Revitalized, promoted and supported student organizations (ASME, ASHRAE, Civil Engineering Club, IEEE, NSBE, SAE, SHEP, SWE, Chinese Student Organizations, Graduate Student Association), as well as National Competitions such as Moonbuggy, Mini-Baja, and Concrete Canon. Established several Scholarship programs
Chenn Q. Zhou Page 6 Organized Engineering summer programs and a number of engineering open houses for K-12 students Actively promoting and marketing engineering programs through website, news releases, promotional materials, open houses, recruitment dinners, invited speeches, and panel discussions
Appendix A PUBLICATIONS AND PRESENTATIONS
Patents and Copyrights (One of Authors) 1. “The Distributive Justice Game: A Classroom Exercise to Teach Principles of Justice,” Computer Software Copyright, Purdue University, 2015 (App No. 1-1702439281; Registration No. TXu-1-963-063) 2. “BF Shaft Simulator– Blast Furnace Shaft Computer Code” Computer Software Copyright, Purdue University, 2012 (One of the authors) 3. “BFPCI– Blast Furnace Pulverized Coal Injection Computer Code” Computer Software Copyright, Purdue University, 2010 (One of the authors) 4. “BFH – Blast Furnace Hearth Computer Code” Computer Software Copyright, Purdue University, 2008 5. Lottes S.A., Chang, S.L., B. Golchert, M. Petrick, & C.Q. Zhou, GFM 4.0, Glass Furnace Model, Computer Software Copyright, Energy Science & Technology Software Center, ANL-SF-01-030c, 2006. 6. Chang, S.L., B. Golchert, S.A. Lottes, M. Petrick, and C.Q. Zhou, GFM 2.0, Glass Furnace Model, Computer Software Copyright, Energy Science & Technology Software Center, ANL-SF-01-030b, 2002. 7. Chang, S.L., B. Golchert, S.A. Lottes, M. Petrick, and C.Q. Zhou, GFM, Glass Furnace Model, Computer Software Copyright, Energy Science & Technology Software Center, ANL-SF-01-030 Package ID 001355MLTPL00 GFM, 2001. 8. U.S. Patent # 6013172, “Methodology for Extracting Local Constants from Petroleum Cracking Flows,” By Chang, S.L., S.A. Lottes, and C.Q. Zhou, ANL Invention Report, ANL-IN-97-074, January 11, 2000. 9. U.S Patent # 5383955, "Nitrogen Oxides and Sulfur Oxides Removal Utilizing Transport Line Absorber,” Jan. 24, 1995
Book Editing and Contributions 1. Liao, S., Sun, Z. & Zhou, C (Guest Editor), “Energy Utilization and Conservation”, A special issue for J. Cent. South Univ. 26, 2019–2020 (September 2019) 2. Zhou, C. (Editor), Proceeding of International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking, August 2019 3. Zhou, C. and Bodnor, R., (Guest Editor), “Steel Manufacturing Simulation and Visualization”, A Special Issue for the Journal of Steel Research International, April 2019 4. Zhou, Chenn (Lead Author); Cutler J. Cleveland (Topic Editor). 2006. "Combustion." In: Encyclopedia of Earth. Eds. Cutler J. Cleveland Washington, D.C.: Environmental Information Coalition, National Council for Science and the Environment)
Articles in Refereed Journals 1. Zhu, R., Zhou, P., Li, J., and Zhou, C.Q., 2020, “CFD model evaluation in mixed convection with high Richardson number,” International Journal of Heat and Mass Transfer, 149, 119133 (16 pages). 2. Yan, H., Liu, L., Zhuang, J., Zhou, P., Zhou, C.Q., 2019, “Molecular Dynamics Simulation of Carbon Effect on the Thermal Physical Properties of the Molten Iron,” ISIJ, 59(2): pp. 221-226. 3. Li, J., Zhou, P., Liao, Z., Chai, L., Zhou, C.Q., and Zhang, L., 2019, “CFD modelling and optimization of oxygen supply mode in KIVCET smelting process,” Transactions of Nonferrous Metals Society of China, 29(7): pp. 1560-1568.
Chenn Q. Zhou Page 7 4. Okosun, T., Silaen, A.K., and Zhou, C.Q., 2019, “Review on Computational Modeling and Visualization of the Ironmaking Blast Furnace at Purdue University Northwest,” (review paper) Steel Research International, 90(4), 1900046 (16 pages). 5. Ma, J., Li, J., Zhou, P., Song, Y., Chai, L., and Zhou, C.Q., 2019, “A viewpoint on the dynamics of bubble formation from a submerged nozzle,” European Journal of Mechanics-B/Fluids, 78: pp. 276-283. 6. Moreland, J., Toth, K., Fang, Y., Block, M., Page, G., Crites, S., and Zhou, C.Q., 2019, “Interactive Simulators for Steel Industry Safety Training,” Steel Research International, 90(4), 1800513 (9 pages). 7. Wu, D., Zhou, P., and Zhou, C.Q., 2019, “Evaluation of pulverized coal utilization in a blast furnace by numerical simulation and grey relational analysis,” Applied Energy, 250: pp. 1686-1695. 8. Yan, S., Tang, G., Zhou, C.Q., and Guo, X., 2019, “Computational Fluid Dynamics Modeling of Combustion Characteristics of a CH4/O2 Combustor in a Copper Anode Furnace,” ACS omega, 4(7): pp. 12449-12458. 9. Liu, W., Lee, J., Guo, X., Silaen, A.K., and Zhou, C.Q., 2019, “Argon Bubble Coalescence and Breakup in a Steel Ladle with Bottom Plugs,” Steel Research International, 90(4), 1800396 (10 pages). 10. Tang, G., Chen, Y., Silaen, A.K., Krotov, Y., Riley, M.F., and Zhou, C.Q., 2019, “Effects of fuel input on coherent jet length at various ambient temperatures,” Applied Thermal Engineering, 153: pp. 513-523. 11. Wu, D., Zhou, P., Yan, H.J., Shi, P.Y., and Zhou. C.Q., 2019, “Numerical investigation of the effects of size segregation on pulverized coal combustion in a blast furnace,” Powder Technology, Volume 342, 15 January 2019, pp. 41-53. 12. Liu, X., Worl, B., Tang, G., Silaen, A.K., Cox, J., Johnson, K., Bodnar, R., and Zhou, C.Q., 2019, “Numerical Simulation of Scale Formation in a Reheat Furnace,” Steel Research International, 90(4), 1800385 (10 pages). 13. Tang, G., Chen, Y., Silaen, A.K., Krotov, Y., Riley, M., and Zhou, C.Q., 2019, “Investigation of Coherent Jet Potential Core Length in an Electric Arc Furnace,” Steel Research International, 90(4), 1800381 (9 pages). 14. Ma, H., Lee, J., Tang, K., Liu, R., Lowry, M., Silaen, A.K., and Zhou, C.Q., 2019, “Modeling of Spray Heat Transfer with a Moving Steel Slab during the Secondary Cooling Process,” Steel Research International, 90 (4), 1800393 (8 pages). 15. Wu, D., Zhou, P., and Zhou, C.Q., 2019, “Numerical study on pulverized coal combustion in a raceway from the viewpoint of coal plume”, Energy Procedia, 158: pp. 5517-5522. 16. Tang, G., Chen, Y., Silaen, A.K., Wang, T., and Zhou, C.Q., 2019, “Investigation of Supersonic Oxygen Jet Potential Core Length at Various Ambient Temperature” The Journal of the Minerals, Metals & Materials Society (JOM), 71(2): pp. 633-643. 17. Tang, G., Wu, B., Bai, D., Wang, Y., Bodnar, R., and Zhou, C.Q., 2018, “CFD Modeling and Validation of a Dynamic Slab Heating Process in an Industrial Walking Beam Reheating Furnace,” Applied Thermal Engineering, 132: pp. 779-789. 18. Fu, D., Tang, G., Zhao, Y., D’Alessio, J., and Zhou, C.Q., 2018 “Integration of Tuyere, Raceway and Shaft Models for Predicting Blast Furnace Process”, Journal of the Minerals, Metals & Materials Society (JOM), 70(6): pp. 951–957. 19. Zhu, R., Zhou, P., Zhou, C.Q., and Li, J., 2017, “Fuzzy grey relational analysis for influencing factors of heat transfer in a blast furnace hearth”, Ironmaking & Steelmaking, 45(10): pp. 899-906. 20. Zhou, P., Ma, H., Xie, Z., Yang, H.j., and Zhou, C.Q., 2017, “Evaluation of flow behavior in copper electro- refining cell with different inlet arrangements”, Transactions of Nonferrous Metals Society of China, 27(10): pp. 2282-2290. 21. Tang, G., Wu, B., Bai, D., Wang, Y., Bodnar, R., and Zhou, C.Q., 2017, “Modeling of the Slab Heating Process in a Walking Beam Reheating Furnace for Process Optimization,” International Journal of Heat and Mass Transfer, 113: pp. 1142-1151. 22. Yan, H., Zhuang, J., Zhou, P., Li, Q., Zhou, C.Q., and Fu, P., 2017, “Molecular Dynamics Simulation of Thermal Physical Properties of Molten Iron,” International J. of Heat and Mass Transfer, 109: pp. 755-760. 23. Yu, Y., Li,Q., Zhou, C.Q., Zhou, P., and Yan, H.J., 2017, “Investigation of droplet evaporation on heterogeneous surfaces using a three-dimensional thermal multiphase lattice Boltzmann model,” Applied Thermal Engineering, 127(25): pp. 1346-1354. 24. Tang, G., Silaen, A.K., Wu, B., Fu, D., Zhou, C.Q., Agnello-Dean, D., Wilson, J., Meng, Q., and Khanna, S., 2017, “Numerical Simulation of an FCC Regenerator Hydrodynamics,” Powder Technology, 305: pp.
Chenn Q. Zhou Page 8 662-672. 25. Okosun, T., Street, S.J., Zhao, J., Wu, B., and Zhou, C.Q., 2017, “Influence of Conveyance Methods for Pulverized Coal Injection in a Blast Furnace,” Ironmaking & Steelmaking, 44(7): pp. 513-525. 26. Tang, G., Silaen, A.K., Wu, B., Fu, D., Zhou, C.Q., Agnello-Dean, D., Wilson, J., Meng, Q., and Khanna, S., 2017, “Numerical Simulation and Optimization of an Industrial FCC Regenerator,” Applied Thermal Engineering, 112: pp. 750-760. 27. Fu, D., Tang, G., Zhao, Y., D’Alessio, J., and Zhou, C.Q., 2016, “Modeling of Iron Ore Reactions in Blast Furnace,” International Journal of Heat and Mass Transfer, 103: pp. 77-86. 28. Tang, G., Wu, B., Johnson, K., Kirk, A., and Zhou, C.Q., 2016, “Numerical Study of a Tangentially Fired Boiler for Reducing Steam Tube Overheating,” Applied Thermal Engineering, 102: pp. 261-271. 29. Zhou, P., Shi, P., Song, Y., Kang, T., Fu, D., and Zhou, C., 2016, “Evaluation of Burden Descent Model for Burden Distribution in Blast Furnace”, J. of Iron and Steel Research International, 23(8): pp. 765-771. 30. Zhou, C.Q., Tang, G., Wang, J., Fu, D., Wu, B., Silaen, A.K., and Okosun, T., 2016, “Comprehensive Numerical Modeling of the Blast Furnace Ironmaking Process,” Journal of the Minerals, Metals & Materials Society (JOM), 68(5): pp. 1353-1362. 31. Zhou, C.Q., Wang, J., Tang, G., Moreland, J., Fu, D., and Wu, B., 2016, “Integration of Advanced Simulation and Visualization for Manufacturing Process Optimization,” Journal of the Minerals, Metals & Materials Society (JOM), 68(5): pp. 1363-1369. 32. Zhou, P., Li, H., Shi, P., and Zhou, C.Q., 2015, “Simulation of the transfer process in the blast furnace shaft with layered burden,” Applied Thermal Engineering, 95: pp. 296-302. 33. Shi, P., Zhou, P., Fu, D., and Zhou, C.Q., 2015, “Mathematical model for burden distribution in blast furnace,” Ironmaking & Steelmaking, 43: pp. 74-81. 34. Shi, P., Fu, D., Zhou, P., and Zhou, C.Q., 2015, “Evaluation of stock profile models for burden distribution in blast furnace,” Ironmaking & Steelmaking, 42(10): pp. 756-762. 35. Ning, L., Fu, D., Zhou, C.Q., and Zhou, J., 2015, “Numerical simulation and optimization of the thermodynamic process of the molten salt furnace,” Journal of Thermal Science and Engineering Applications, 7(1), 011009 (5 pages). 36. Fu, D., Chen, Y., and Zhou, C.Q., 2015, “Mathematical modeling of blast furnace burden distribution with non-uniform descending speed,” Applied Mathematical Modeling, 39: pp. 7554-7567. 37. Okosun, T., and Zhou, C.Q., 2015, “Computational Examination of Utility Scale Wind Turbine Wake Interactions,” Journal of Fundamentals of Renewable Energy and Applications, 5: pp. 174 (9 pages). 38. Silaen, A.K., Wu, B., Zhou, C.Q., Yazawa, K., and Shakouri, A., 2015, “Numerical Model of Thermoelectric Topping Cycle of Coal-Fired Power Plant,” J. of Heat Transfer, 137(9), 091012 (6 pages). 39. Tang, G., Silaen, A.K., Wu, B., Zhou, C.Q., Agnello-Dean, D., Wilson, J., Meng, Q., and Khanna, S., 2015, “Numerical Simulation of and Industrial Fluid Catalytic Cracking Regenerator,” J. Thermal Sci. Eng. Appl., 7(2), 021012 (10 pages). 40. Wu, B., Tang, G., Chen, X., Zhou, C.Q., Colella, P. C., and Okosun, T., 2014, “Optimization of an Urea Decomposition Chamber Using CFD and VR,” Applied Thermal Engineering, 70(1): pp. 827-837. 41. Fu, D., Chen, Y., Zhao, Y., D’Alessio, J., Ferron, K., and Zhou, C.Q., 2014, “CFD Modeling of Multiphase Reacting Flow in Blast Furnace Shaft with Layered Burden,” Applied Thermal Engineering, 66(1-2): pp. 298–308. 42. Yazawa, K., Shakouri, A., Fisher, T., Hao, M., Silaen, A., Wu, B., and Zhou, C.Q., 2014, “Thermoelectric Topping Cycles for Power Plants to Eliminate Cooling Water Consumption,” Energy Conversion and Management, 84: pp. 244–252. 43. Tang, G., Wu, B., Johnson, K., Kirk, A., and Zhou, C.Q., 2014, “Simulation of an Industrial Tangentially Fired Boiler Firing Metallurgical Gases,” J. Thermal Sci. Eng. Appl., 7(1), 011003 (11 pages). 44. Fu, D., Chen, Y., and Zhou, C.Q., 2014, “Numerical Methods for Simulation the Reduction of Iron Ore in Blast Furnace Shaft,” Journal of Thermal Science and Engineering Applications, 6(2), 021014 (9 pages). 45. Li, M., Li, Q., Zhou, T., Lei, B., Zhou, D., and Zhou, C.Q., 2014, “Numerical simulation on separation of solid with liquid and sedimentation of red mud in a flat bottom thickener,” Chinese Journal of Process Engineering, 2: pp. 777-782. 46. Zhou, T., Li, M., Li, Q., Lei, B., and Zhou, C.Q., 2014, “Numerical simulation of flow regions in red mud separation thickener’s feedwell by analysis of residence-time distribution,” Transactions of Nonferrous Metals Society of China. 24(4): pp. 1117-1124.
Chenn Q. Zhou Page 9 47. Zhou, T., Li, M., Li, Q., Zhou, C.Q., and Zhou, J., 2014, “Numerical simulation and optimization of red mud separation thickener with self-dilute feed,” Journal of Central South University, 1: pp. 344-350. 48. Zhao, Y., Fu, D., Chen, Y., Zhou, C.Q., Lherbier, Jr, L. W., and Grindey, J. G., 2013, “Investigation of Skull Formation in a Blast Furnace Hearth,” Journal of Steel Research International, 85(5): pp. 891-901. 49. Zhang, H., Zhou, C.Q., Wu, B., and Li, J., 2013, “A Virtual Aluminum Reduction Cell,” Journal of the Minerals, Metals & Materials Society (JOM), 65(11): pp. 1452-1458. 50. Do, P., Moreland, J., Wang, X., Zhou, C., and Ice, P., 2012 “The Effects of Mixed Reality Simulators in the Introductory Wind Energy Course: A Tool for Teaching Engineering Concepts,” Innovative Teaching, 2 (7) (10 Pages). 51. Yang, D., Pan, J., Zhou, C.Q., Zhu, X., Bi, Q., and Chen, T., 2011, “Experimental Investigation on Heat Transfer and Frictional Characteristics of Vertical Upward Rifled Tube in Supercritical CFB Boiler,” Journal of Experimental Thermal and Fluid Science, 35: pp. 291-300. 52. Ai, Z. T., Mak, C. M., Niu, J. L., Li, Z. R. and Zhou, C.Q., 2011, “The Effect of Balconies on Ventilation Performance of Low-rise Buildings,” Indoor and Built Environment, 20(6): pp. 649-660. 53. Yang, D., Pan, J., Wu, Y., Chen T., and Zhou C.Q., 2011, “Numerical Simulation of Flow Boiling for Organic Fluid with High Saturation Temperature in Vertical Porous Coated Tube,” International Journal of Heat and Fluid Flow, 32(4): pp. 818–825. 54. Zhou, C.Q., Huang, D., Zhao, Y., and P. Chaubal, 2010, “CFD Analysis of 3-D Hot Metal Flow Characteristics,” Journal of Thermal Science and Engineering Applications, 2(1) (10 pages). 55. Gu, M., Chen, G., Zhang, M., Huang, D., Chaubal, P., and Zhou, C.Q., 2010, “Three-Dimensional Simulation of the Pulverized Coal Combustion Inside Blast Furnace Tuyere,” Applied Mathematics Modeling, 34(11): pp. 3536-3546. 56. Ma, W., Liu, X., Li, L., Shi, X., and Zhou, C.Q., 2009, “Research on the Waiting Time of Passengers and Escalator Energy Consumption at the Railway Station,” Energy and Buildings, 41(12): pp. 1313-1318. 57. Fu, D., Huang, D., Juma, A., Schreiber, C., Wang, X., and Zhou, C.Q., 2009, “Numerical Simulation of Thermal Stress for a Liquid-Cooled Exhaust Manifold,” Journal of Thermal Science and Engineering Applications, 1(3), 031010 (10 pages). 58. Li, B., Yin, H., Zhou, C.Q., and Tsukihashi, F., 2008, “Modeling of Three-phase Flows and Behavior of Slag/Steel Interface in an Argon Gas Stirred Ladle,” ISIJ International, 48(12): pp. 1704–1711. 59. Gu, M., Zhang, M., Selvarasu, N. K. C., Zhao, Y., and Zhou, C.Q., 2008, “Numerical Analysis of Pulverized Coal Combustion inside Tuyere and Raceway,” Steel Research International, 79(1): pp. 17-24. 60. Zhang, Y., Deshpande, R., Huang, D., Chaubal, D., and Zhou, C.Q., 2008, “Numerical Analysis of Blast Furnace Hearth Inner Profile by Using CFD and Heat Transfer Model for Different Time Periods,” International Journal of Heat and Mass Transfer, 51(1-2): pp. 186-197. 61. Zhang, Y., Deshpande, R., Huang, D., Chaubal, P, and Zhou, C.Q., 2007, “A Methodology for Blast Furnace Hearth Inner Profile Analysis,” Journal of Heat Transfer, 129(12): pp. 1729-1731. 62. Gerber, H. L., Bassi, A., Khalid, M. H., Zhou, C.Q., Wang, S. M., and Tseng, C., 2006, “Analytical and Experimental Dosimetry of a Cell Culture in T-25 Flask Housed in A Thermally Controlled Waveguide,” IEEE Transactions on Plasma Science, 34(4): pp. 1449-1454. 63. Lee, S., Johnson, D., Dunbar, K., Dong, H., Ge, X., Kim, Y. C., Wing, C., Jayathilaka, N., Emmanue, N., Zhou, C.Q., Gerber, H. L, Tseng, C., and Wang, S. M., 2005, “2.45 GHz Radiofrequency Fields Alter Gene Expression in Cultured Human Cells,” Federation of European Biological Society Letters, 579: pp. 4829- 4836. 64. Chang, S.L., Zhou, C.Q., and Golchert, B., 2005, “Eulerian Approach for Multiphase Flow Simulation in a Glass Melter,” J. of Applied Thermal Engineering, 25: pp. 3083-3103. 65. Chang, S.L., and Zhou, C.Q., 2003, “Simulation of FCC Riser Flow with multiphase Heat Transfer and Cracking Reactions,” Computational Mechanics, 31(6): pp. 519-532. 66. Chang, S.L., Lottes, S.A., and Zhou, C.Q., 2000, “Computational fluid Dynamics Applications,” Energy 2000: State of the Art, pp. 299-324. 67. Zhou, C.Q., Neal, L.G., Bolli, R., Haslbeck, J., and Chang, A., 1996, “Control of NOx Emissions by NOx Recycle Approach,” Symposium (International) on Combustion, 2: pp. 2091-2097. 68. Boyle, J., Russell, T., Yao, S.C., Zhou, C.Q., Ekmann, J., Fu, Y., and Mathur, M., 1993, “Reduction of Nitrogen Oxides from Post-Combustion Gases Utilizing Molecular Radical Species,” Fuel, 72(10): pp. 1419- 1429.
Chenn Q. Zhou Page 10 69. Zhou, C.Q., Yao, S.C., Russell, T., and Boyle, J., 1992, “Flue Gas NOx Reduction Using Ammonia Radical Injections,” Journal of Air Waste & Management Association, 42(9): pp. 1193-1197. 70. Zhou, C.Q., and Yao, S.C., 1992, “Group Modeling of Impacting Spray Dynamics,” International Journal of Heat and Mass Transfer, 35(1): pp. 121-129. 71. Tan, H., and Zhou, C.Q., 1988, “A Preliminary Research on the Effect of Additives on Combustion Performance,” Stealth Technique, (1). 72. Shen, Y., Zhou, C.Q., and Zeng, Q., 1986, “An Approach to Specify the Initial Conditions in Combustion Flow by Simulating a Fictitious Catalytic boundary,” Journal of Aerospace Power, 1(2): pp. 173-175. 73. Zeng, Q., Shen, Y., and Zhou, C.Q., 1985, “The Calculation of Recirculation Flow Behind a Bluff Body Inside a Pipe,” Journal of Aerospace Power, 5.
Articles in Technical Magazines 1. Chen, Y., Wang, Y., Tang, G., Silaen, A.K., Vanover, K., and Zhou, C.Q., 2019, “Numerical Investigation of Decarburization Reaction Characteristics in Electric Arc Furnace Steelmaking Process,” Iron & Steel Technology Magazine, to be published on January 2020 (8 pages). 2. Lee, J., Walla, N., Silaen, A. K. Goodloe D. D., and Zhou, C.Q., 2019, “Flow and Thermal Stress Analysis of a Blast Furnace Blowpipe,” Iron & Steel Technology Magazine, September 2019, pp. 54-62. 3. Tang, G., Chen, Y., Silaen, A.K., Spencer, A., Krotov, Y., and Zhou, C.Q., 2019, “Modeling of Scrap Preheating by Oxy-fuel Combustion in an Electric Arc Furnace,” Iron and Steel Technology Magazine, January 2019, pp. 34-41. 4. Moreland, J., Liu, Y., Page, G., Krotov, Y., Crites, S., and Zhou, C.Q., 2018, “Development of a Safety Training Simulator for Lockout Tagout,” Iron and Steel Technology Magazine, December 2018, pp. 80-85. 5. Liu, X., Worl, B., Tang, G., Silaen, A.K., Cox, J., Johnson, K., Zhou, C.Q., 2018, “A Numerical Model to Predict Scale Formation in an Industrial Reheat Furnace,” Iron and Steel Technology Magazine, December 2018, pp. 62-70. 6. Silaen, A.K., Asfar, A., Zhao, H., Wu, B., Trimble, J., Grenough, D., Wilke, M., Fabina, L., Mengel, J., and Zhou, C.Q., 2017, “Development of a Caster Scheduling Model for Process Optimization,” Iron & Steel Technology Magazine, December 2017, pp. 58-62. 7. Moreland, J., Liu, Y., Fang, Y., Hoerter, M., Block, M.E, Page, G., and Zhou, C.Q., 2017, “Interactive Training for Mobile Equipment Safety: Targeting Safety Attitudes and Beliefs,” Iron & Steel Technology Magazine, December 2017, pp 32-37. 8. Tang, G., Wu, B., Bai, D., Wang, Y., Bodnar, R., and Zhou, C.Q., 2017, “Numerical Simulation of a Walking Beam Type Steel Slab Reheating Furnace,” Iron & Steel Technology Magazine, March 2017, pp.78-88. 9. Moreland, J., Zaraliakos, J., Wu, B, Wang, J., Guo, J., Feng, Z., Zhou, M., Block, M., and Zhou, C.Q., 2016, “Interactive training for fall protection and crane safety,” Iron & Steel Technology Magazine, December 2016, pp. 30-35. 10. Tang, G., Wu, B., Gong, L., Silaen, A.K., Lash, J., Borges, E.K., and Zhou, C.Q., 2016, “Numerical Study of a Basic Oxygen Process Hydrodynamics,” Iron & Steel Technology Magazine, April 2016, pp. 52-59. 11. Silaen, A.K., Okosun, T., Chen, Y., Wu, B., Zhao, J., Zhao, Y., D’Alessio, J., Capo, J.C., and Zhou, C.Q., 2016, “Investigation of High Rate Natural Gas Injection through Various Lance Designs in a Blast Furnace,” Iron & Steel Technology Magazine, March 2016, pp. 68-79. 12. Walla, N., Cingle III, G., Wu, B., and Zhou, C.Q., 2015, “Life Prediction in Industrial Equipment,” Iron & Steel Technology Magazine, June 2015, pp. 57-62. 13. Fu, D., Chen, Y., Zhao, Y., D’Alessio J., and Zhou, C.Q., 2014, “CFD Investigation of the Effects of Iron Ore Reducibility and Coke Reactivity on Blast Furnace Operation,” Iron & Steel Technology Magazine, Dec. 2014, pp. 57-64. 14. Zhou, C.Q., 2011, “Visualizing the Future in Steel Manufacturing,” Iron & Steel Technology Magazine, 8(1): pp. 37-50. 15. Wu, B., Zheng, D., Chen, N., Lu, D., and Zhou, C.Q., 2011, “Numerical Investigation and Optimization of a Venturi Scrubber,” Iron and Steel Technology Magazine, 7(1): pp. 45-53. 16. Huang, D., Zheng, L., and Zhou, C.Q., 2009, “Predictions of Blast Furnace Hearth Corner Erosion Profile,” Iron and Steel Technology Magazine, 7(3): pp. 45-53.
Chenn Q. Zhou Page 11 17. Zheng, L., Deshpande, R., Zhou, C.Q., Huang, D., and Chaubal, P., 2009, “Prediction of Blast Furnace Hearth Inner Profiles,” Iron and Steel Technology Magazine, 6(3): pp. 83-89. 18. Yan, F., Zhou, C.Q., Huang, D., and Chaubal, P., 2005, “Three-Dimensional Computational Modeling of a Blast Furnace Hearth,” Iron and Steel Technology Magazine, 2(1): pp. 48-58. 19. Chang, S.L., and Zhou, C.Q., 1999, “Benefits of CFD Simulation: Computational Fluid Dynamic Simulation as an Aid to System Design and Use,” Chemical Processing, 62(11): pp. 45-48.
Articles in Refereed Conference Proceedings 1. Resa, J., Moore, M.T., Zhou, X., Ma, H., Silaen, A.K., and Zhou, C.Q., 2020, “Analysis of Solidification and Thermal-Mechanical Behaviors in Continuous Casting,” TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, 1175-1187 2. Moreland, J., Estrada, J., Mosquera, E., Toth, K., Silaen, A.K., and Zhou, C.Q., 2020, “Integrating Fluid Simulation with Virtual Die Casting Machine for Industry 4.0 and Operator Training,” TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, 1026 - 1031 3. Zheng, D., Ma, H., Silaen, A.K., Zhou, C.Q., 2019, “CFD Analysis of Reversed Installation on Flow Measurements by a Plate Orifice”, Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, USA (6 pages). 4. Zhou, X., Moore, M.T., Ma, H., Silaen, A.K., Zhou, C.Q., 2019, “Adaptive Mesh Refinement of the Solidification Front in Continuous Caster Simulations”, Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, USA (10 pages). 5. Tang, G., Chen, Y., Wang, Y., Silaen, A., Vanover, K., Krotov, Y., and Zhou, C.Q., 2019, “Numerical Simulation of Oxy-Natural Gas Combustion in an Electric Arc Furnace,” Proceedings of the 8th International STEELSIM Conference, Toronto, Ont., Canada, pp. 270-280. 6. Ma, H., Silaen, A., and Zhou, C.Q., 2019, “Study on Numerical Simulation Strategy for Spray Cooling during Continuous Casting of Steel,” Proceedings of the 8th International STEELSIM Conference, Toronto, Ont., Canada, pp. 394-410. 7. Liu, W., Guo, X., Silaen, A.K, Walla, N., Oltmann, H., Bhansali, A., Pitts-Baggett, A., Thapliyal, V., Pretorius, E., and Zhou, C.Q., 2019, “Analysis of Transport and Removal of Inclusions in an Industrial Gas- Stirred Ladle,” Proceedings of the 8th International STEELSIM Conference, Toronto, Ont., Canada, pp. 22-40. 8. Zhou, P., Wu, D., Yan, H., Zhu, R., and Zhou, C.Q., 2019, “Effects of Lance Configuration on the Flow and Combustion Behavior of a Pulverized Coal Plume in the Tuyere,” Proceedings of the 8th International STEELSIM Conference, Toronto, Ont., Canada, pp. 56-67. 9. Toth, K.A., Moreland, J., Zhou, C.Q., Balachandran, A., Zhang, F., and Roudebush, J. C., June 2019, Board 149: Development of an Educational Wind Turbine Troubleshooting and Safety Simulator Paper presented at 2019 ASEE Annual Conference & Exposition , Tampa, Florida. https://peer.asee.org/32264. 10. Worl, B.M., Fan, J., Silaen, A., Cox, J., Johnson, K., Fabina, L., Maiolo, J., Tian, K., and Zhou, C.Q., 2019, “Analysis of the Effects of Oxygen Enrichment in a Reheating Furnace,” Proceedings of 2019 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA, pp. 2629-2640. 11. Okosun, T., Nielson, S., D’Alessio, J., Klaas, M., Street, S. J., and Zhou, C.Q., 2019, “Investigation of High-Rate and Pre-heated Natural Gas Injection in the Blast Furnace,” Proceedings of 2019 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA, pp. 383-397. 12. Ma, H., Liu, R., Lowry, M., Silaen, A., and Zhou, C.Q., 2019, “Numerical Investigation of Spray Cooling at Various Operation Conditions during Continuous Casting Operation,” Proceedings of 2019 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA, pp. 1425-1440. 13. Luo, Y., Toth, K., Moreland, J., Block, M., Rosenbalm, D. S., Page, G., and Zhou, C.Q., 2019, “Interactive VR Video for Mobile Equipment Safety Training,” Proceedings of 2019 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA, pp. 33-41. 14. Chen, Y., Wang, Y., Tang, G., Silaen, A., Vanover, K., and Zhou, C.Q., 2019, “Numerical Investigation of Decarburization Reaction Characteristics in an Electric Arc Furnace Steel,” Proceedings of 2019 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA, pp. 798-796. 15. Tang, G., Chen, Y., Silaen, A.K., Krotov, Y., and Zhou, C.Q., 2019, “Effects of Steel Scrap Oxidation on Scrap Preheating Process in an Electric Arc Furnace,” Proceedings of 10th International Symposium on High Temperature Metallurgical Processing, 2019 TMS Conference, San Antonio, TX, USA, pp. 453-465.
Chenn Q. Zhou Page 12 16. Chen, Y., Silaen, A.K., Walla, N., Johnson, K., and Zhou, C.Q., 2018, “Optimization of Heat Transfer Process in a Walking Beam Reheating Furnace using Computational Fluid Dynamics,” Proceedings of the ASME 2018 International Mechanical Engineering Congress & Exposition, Pittsburgh, PA, USA (9 pages). 17. Zhou, P., Li, J., Wen, Q., Zu, E., Gui, W., and Zhou, C.Q., 2018, “Soft-sensing Method of Cohesive Zone Shape and Position in Blast Furnace Shaft,” Proceedings of IFAC-PapersOnLine 51(21): pp. 48-52. 18. Cui, Y., Lee, J., Walla, N., Silaen, A.K., Goodloe, D., and Zhou, C.Q., 2018, “Analysis of Flow and Thermal Stress in a Blast Furnace Blowpipe,” Proceedings of the ASME 2018 International Mechanical Engineering Congress & Exposition. IMECE 2018, Pittsburgh, PA, USA (8 pages). 19. Ma, H., Tang, K., Liu, R., Lowry, M., Silaen, A.K., and Zhou, C.Q., 2018, “Numerical Modeling of water impingement and heat transfer with solid slabs during secondary cooling in a continuous caster,” Proceedings of the ASME 2018 International Mechanical Engineering Congress& Exposition. IMECE 2018, Pittsburgh, PA, USA (9 pages). 20. Chen Y., Silaen, A.K., and Zhou, C.Q., 2018, “Numerical Simulation of Fluid Flow during the Steel Refining Process in an Electric Arc Furnace,” MS&T 2018, October, 14-18, Columbus, OH, USA (8 pages). 21. Moore, M.T., Chen, B., Morales, K., Silaen, A.K., and Zhou, C.Q., 2018, “Methods for Modeling Heat Transfer and Solidification in Continuous Casting,” Proceedings of the 16th International Heat Transfer Conference, Beijing, China (20 pages). 22. Ma, H., Lee, J., Liu, R., Lowry, M., Silaen, A.K., Zhou, C.Q., 2018, “Numerical Analysis of Heat Transfer for Jet Impingement on A Hot Steel Plate during Secondary Cooling,” Proceedings of the 16th International Heat Transfer Conference, Beijing, China (8 pages). 23. Liu, X., Chen, Y., Worl, B., Tang, G., Silaen, A.K., and Zhou, C.Q., 2018, “Investigation of Combustion, Heat Transfer and Slab Quality in Industrial Reheating Furnace,” Proceedings of AIST- 2nd International Symposium on the Recent Developments in Plate Steels, Orlando, FL, USA, pp. 51-61. 24. Lee, J., Yan, D., Silaen, A.K., Oltmann, H., Pitts-Baggett, A., Thapliyal, V., Pretorius, E., and Zhou, C.Q., 2018, “Analysis of Thermal Homogenization in Steel Refining Ladle Using Bottom Gas Injection,” Proceedings of AIST 2nd International Symposium on the Recent Developments in Plate Steels, Orlando, FL, USA, pp. 9-19. 25. Moreland, J., Liu, Y., Page, G., Krotov, Y., Crites, S., and Zhou, C.Q., 2018, “Development of a Safety Training Simulator for Lockout Tagout,” Proceedings of 2018 AISTech – Iron and Steel Technology Conference, Philadelphia, PA, USA, pp. 7-13. 26. Lee, J., Walla, N., Silaen, A.K., Goodloe, D., and Zhou, C.Q., 2018, “Flow and Thermal Stress Analysis of Blast Furnace Blowpipe,” Proceedings of 2018 AISTech – Iron and Steel Technology Conference, Philadelphia, PA, USA, pp. 2985-2995. 27. Lee, J., Yan, D., Silaen, A.K., Oltmann, H., Pitts-Baggett, A., Thapliyal, V., Pretorius, E., and Zhou, C.Q., 2018, “Analysis of Thermal Homogenization in Steel Refining Ladle Using Bottom Gas Injection,” Proceedings of 2018 AISTech, Philadelphia, PA, USA, pp. 1313-1322. 28. Okosun, T., Jampani, M., Riley, M.F., Silaen, A.K., and Zhou, C.Q., 2018, “Examination of Injected Fuel Combustion in a Generic Blast Furnace Test Rig”, Proceedings of 2018 AISTech – Iron and Steel Technology Conference, Philadelphia, PA, USA, pp. 253-264. 29. Liu, X., Worl, B., Tang, G., Silaen, A.K., Cox, J., Johnson, K., and Zhou, C.Q., 2018, “A Numerical Model to Predict Scale Formation in an Industrial Reheat Furnace,” Proceedings of 2018 AISTech – Iron and Steel Technology Conference, Philadelphia, PA, USA, pp. 3045-3054. 30. Tang, G., Chen, Y., Silaen, A.K., Spencer, A., Krotov, Y., and Zhou, C.Q., 2018, “Modeling of Scrap Preheating by Oxy-fuel Combustion in an Electric Arc Furnace,” Proceedings of 2018 AISTech – Iron and Steel Technology Conference, Philadelphia, PA, USA, pp. 781-789. 31. Chen, B., Moore, M.T., Trimble, J., Morales, K., Silaen, A.K., and Zhou, C.Q., 2018, “Analysis of Continuous Caster Flow Pattern Variations Relating to Argon Injection,” Proceedings of 3rd Thermal and Fluids Engineering Conference (TFEC), Fort Lauderdale, FL, USA (12 pages). 32. Chen, Y., Liu, X., Silaen, A.K., and Zhou, C.Q., 2018, “Investigation of Combustion and Heat Transfer in an Industrial Reheating Furnace using CFD,” Proceedings of CFD Modeling and Simulation in Material Processing, 2018 TMS Conference, Phoenix, AZ, USA, pp. 187-198. 33. Tang, G., Tang, K., Silaen, A.K., Yan, H., Cui, Z., Wang, Z., Wang, H., Zhou, P., and Zhou, C.Q., 2018, “CFD Modeling of Flow and Chemical Reactions in a Submerged Lance Copper Smelting Furnace,”
Chenn Q. Zhou Page 13 Proceedings of 9th International Symposium on High Temperature Metallurgical Processing, 2018 TMS Conference, Phoenix, AZ, USA, pp. 103-114. 34. Wang, Y., Silaen, A., Tang, G., Barker, D., and Zhou, C.Q., 2017, “Numerical Optimization of a Gravity Dust-catcher for Improving Operation Efficiency,” Proceedings of the ASME 2017 International Mechanical Engineering Congress& Exposition. IMECE 2017, Tampa, FL, USA (7 pages). 35. Wang, Y., Tang, G., Silaen, A., A. Kirk, and Zhou, C.Q., 2017, “Investigation of Hot Water Injection Effects on Reducing Frozen Blockage in a Water Intake Unit,” Proceedings of the ASME 2017 International Mechanical Engineering Congress& Exposition. IMECE 2017, Tampa, FL, USA (7 pages). 36. Tang, G., Liu, W., Silaen, A., and Zhou, C.Q., 2017, “Modeling of Post-combustion in an electric arc furnace,” Proceedings of the ASME 2017 International Mechanical Engineering Congress & Exposition. IMECE 2017, Tampa, FL, USA (6 pages). 37. Wang, J., Moreland, J., Tang, G., Okosun, T., Silaen, A.K., and Zhou, C.Q., 2017, “Using Numerical Simulation and Virtual Reality Visualization for Steelmaking Applications,” Proceedings of 3rd ESTAD 2017 Conference, Vienna, Austria (6 pages). 38. Tang, G., Shao, H., Silaen, A.K., Spencer, A., Li, J., and Zhou, C.Q., 2017, “Modeling of Steel Bar Melting Process in an Experimental Induction Furnace,” Proceedings of 3rd ESTAD 2017 Conference, Vienna, Austria (9 pages). 39. Chandramouli, C.V., Wang, X., Gao, L., Moreland, J., and Zhou, C.Q., 2017, “Virtual 3D Septic system for Education and Outreach,” Kentucky Water Resources Research Institute Symposium, Lexington, KY held during March 2017, pp. 83-84. 40. Moreland, J., Hoerter, M., Wang, S., and Zhou, C.Q., 2017, “Development of an Educational Wind Turbine Troubleshooting and Safety Simulator,” Proceedings of 124th ASEE Annual Conf., Columbus, OH, USA (13 pages). 41. Liu, X., Tang, G., Silaen, A.K., Cox, J., Johnson, K., and Zhou, C.Q., 2017, “Investigation of Operational Effects on Slab Heating Characteristics in a Pusher-type Reheat Furnace with Continuous Slab Motion,” Proceedings of ASME 2016 Summer Heat Transfer Conference, Bellevue, WA, USA (8 pages). 42. Liu, X., Okosun, T., Tang, G., Silaen, A.K., Street, S., and Zhou, C.Q., 2017, “Investigation of Heat Transfer Phenomena in Blast Furnace Tuyere/Blowpipe Region,” Proceedings of ASME 2016 Summer Heat Transfer Conference, Bellevue, WA, USA (8 pages). 43. Wang, S., Liu, Y., Hoerter, M., Moreland, J., Page, G., Krotov, Y., Crites, S., and Zhou, C.Q., 2017, “Development of a Safety Training Simulator for Fall Protection,” Proceedings of 2017 AISTech – Iron and Steel Technology Conference, Nashville, TN, USA (6 pages). 44. Silaen, A.K., Asfar, A., Zhao, H., Wu, B., Trimble, J., Grenough, D., Wilke, M., Fabina, L., Mengel, J., and Zhou, C.Q., 2017, “Development of a Caster Scheduling Model for Process Optimization,” Proceedings of 2017 AISTech – Iron and Steel Technology Conference, Nashville, TN, USA (6 pages). 45. Okosun, T., Liu, X., Silaen, A.K., Barker, D., Dybzinski, D., and Zhou, C.Q., 2017, “Effects of Blast Furnace Auxiliary Fuel Injection Conditions and Design Parameters on Combustion Characteristics and Injection Lance Wear,” Proceedings of 2017 AISTech, Nashville, TN, USA (12 pages). 46. Tang, G., Wang, Y., Silaen, A.K., Spencer, A., Krotov, Y., and Zhou, C.Q., 2017, “Freeboard Combustion Simulation in an Electric Arc Furnace with a Flat Bath,” Proceedings of 2017 AISTech – Iron and Steel Technology Conference, Nashville, TN, USA (13 pages). 47. Liu, X., Tang, G., Silaen, A.K., Cox, J., Johnson, K., and Zhou, C.Q., 2017, “CFD Modeling of a Pusher Type Reheat Furnace,” Proceedings of 2017 AISTech, Nashville, TN, USA (11 pages). 48. Liang, M, Shao, H., Wang, Y., Tang, G., Silaen, A.K., Voss, A., Oltmann, H., Pitts, A., Pretorius, E., and Zhou, C.Q., 2017, “Investigation of Slag Eye Size in a Steel Ladle with Bottom Plug,” Proceedings of 2017 AISTech – Iron and Steel Technology Conference, Nashville, TN, USA (12 pages). 49. Tang, G., Silaen, A.K., Yan, H., Cui, Z., Wang, Z., Wang, H., Tang, K., Zhou, P., and Zhou, C.Q., 2017, “CFD Study of Gas-Liquid Phase Interaction Inside A Submerged Lance Smelting Furnace for Copper Smelting,” Proceedings of 8th International Symposium on High Temperature Metallurgical Processing, 2017 TMS Conference, San Diego, CA, USA, pp. 101-111. 50. Liu, X., Wu, B., Tang, G., Silaen, A.K., Chen, Y., and Zhou, C.Q., 2016, “Numerical Modeling and Optimization of a Natural Gas and Coke Oven Gas Mixing Flow Field,” Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition, Phoenix, AZ, USA (7 pages). 51. Tang, G., Wang, D., Wu, B., Chen, Y., Liu, X., Silaen, A., and Zhou, C.Q., 2016, “Design of a 4-Cylinder
Chenn Q. Zhou Page 14 Gasoline Turbo Engine Intake Manifold,” Proceedings of the ASME 2016 International Mechanical Engineering Congress& Exposition. IMECE 2016, Phoenix, AZ, USA (6 pages). 52. Chandramouli, C.V., Hixon, E., Zhou, C.Q., Moreland, J., Wang, J., Xiong, Z., Teegavarappu, R., Fox, J., and Behera, P., 2016, “Evaluating the usefulness of Virtual 3D lab modules developed for a flooding system in student learning,” ASEE, 123rd Annual Conference & Exposition, New Orleans, LA, USA (12 pages). 53. Chandramouli, C.V., Ziong, Z., Wang, J., Moreland, J., and Zhou, C.Q., Teegavarappu, R., Fox, J., Behera, P., and Hixon, E., 2016, “Virtual 3D Modeling for Little Calumet River Flood Inundation Studies,” World Environmental and Water Resources Congress 2016: pp. 99-103. 54. Ma, H., Okosun, T., Silaen, A.K., Wu, B., Tang, G., and Zhou, C.Q., 2016, “Numerical Analysis of Raceway Combustion under Different Operating Conditions in Blast Furnace,” MS&T 2016, October, 23 -27, Salt Lake City, UT, USA (8 pages). 55. Okosun, T., Tang, G., Fu, D., Silaen, A.K., Wu, B., and Zhou, C.Q., 2016, “Numerical Simulation of Raceway Formation in Blast Furnace,” The 7th International Conference on Computational Methods (ICCM 2016), August 1st-4th, Berkeley, CA, USA (13 pages). 56. Tang, G., Wu, B., and Zhou, C.Q., 2016, “Numerical Simulation and Optimization of a Carbon Monoxide Boiler,” ASME 2016 Summer Heat Transfer Conference, July 10 – 14, Washington DC, USA (10 pages). 57. Tang, G., Saavedra, A., Wu, B., Okosun, T., Bai, D., Wang, Y., Bodnar, R., and Zhou, C.Q., 2016, “Modeling of Steel Slab Reheating Process in a Walking Beam Reheating Furnace,” ASME 2016 Summer Heat Transfer Conference, July 10 – 14, Washington DC, USA (6 pages). 58. Okosun, T., Street, S.J., Zhao, J., Wu, B., and Zhou, C.Q., 2016, “Investigation of Dual Lance Designs for Pulverized coal and natural gas co-injection,” Proceedings of 2016 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA (14 pages). 59. Chang, Y., Phillips, L., Moreland, J., Bliss, B., Landau, K., Edwards, K., and Zhou, C.Q., 2016, “3D Visualization of The Making, Shaping and Treating of Steel Wheel,” Proceedings of 2016 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA (8 pages). 60. Moreland, J., Zaraliakos, J., Wu, B, Wang, J., Guo, J., Feng, Z., Zhou, M., Block, M., and Zhou, C.Q., 2016, “Interactive training for fall protection and crane safety,” Proceedings of 2016 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA (8 pages). 61. Moreland, J., Giboyeaux, E., and Zhou, C.Q., 2016, “Development of a Heads-up Assisted Lockout Tagout System for Safety,” Proceedings of 2016 AISTech, Pittsburgh, PA, USA (4 pages). 62. Silaen, A.K., Okosun, T., Zhao, J., Wu, B., Zhao, Y., D’Alessio, J., and Zhou, C.Q., 2016, “Investigation of Impacts of Blast Furnace Operating Conditions on Stability and Performance,” Proceedings of 2016 AISTech – Iron and Steel Technology Conference, Pittsburgh, PA, USA (8 pages). 63. Chen, X., Tang, G., Wu, B., Hwang, H., Pratt, M., Mulligan, R.J., and Zhou, C.Q., 2016, “CFD Modeling of a Ladle with Top Stirring Lance,” Proceedings of 2016 AISTech, Pittsburgh, PA, USA (11 pages). 64. Tang, G., Wu, B., Bai, D., Wang, Y., Bodnar, R., and Zhou, C.Q., 2016, “Numerical Simulation of a Walking Beam Type Steel Slab Reheating Furnace,” Proceedings of 2016 AISTech, Pittsburgh, PA, USA (12 pages). 65. Okosun, T., Silaen, A.K., Tang, G., Wu, B., and Zhou, C.Q., 2016, “CFD Analysis of Blast Furnace Operating Condition Impacts on Operational Efficiency,” Proceedings of CFD Modeling and Simulation in Materials Processing, 2016 TMS Conference, Nashville, TN, USA, pp. 75-82. 66. Ma, H., Chen, X., Hwang, H., Pratt, M., Mulligan, R.J., Wu, B., Tang, G., and Zhou, C.Q., 2016 “CFD Modeling of a Ladle with Top Stirring Lance,” Proceedings of CFD Modeling and Simulation in Materials Processing, 2016 TMS Conference, Nashville, TN, USA, pp. 169-177. 67. Silaen, A.K., Wu, B., and Zhou, C.Q., 2016, “Numerical Investigation of Thermoelectric Topping Cycle in Coal Fired Power Plant Boiler,” ASME 5th Micro/Nanoscale Heat and Mass Transfer International Conference, MNHMT 2016, Singapore (6 pages). 68. Chandramouli, C.V., Moreland, J., Wang, J., Ziong, Z., Zhou, C.Q., Hixon, E., Teegavarappu, R., Fox, J., and Behera, P., 2015, “Flood modeling using virtual 3D environment to help student learning,” Kentucky Water Resources Research Symposium, Lexington, KY, USA, pp. 41-42. 69. Wang, D., Chen, X., Zhang, W., Liu, D., Tang, G., Okosun, T., Wu, B., and Zhou, C.Q., 2015, “CFD Simulation of A 6-Cylinder Diesel Engine Intake and Exhaust Manifold,” ASME International Mechanical Engineering Congress and Exposition, IMECE 2015, Houston, TX, USA (7 pages).
Chenn Q. Zhou Page 15 70. Wang, J., Moreland, J., Liu, Y., Zhang, H., Pan, H., Li, Y., Zhang, G., Du, M., and Zhou, C.Q., 2015, “Virtual Wind Turbine for Augmented Reality Gearbox Inspection,” WorldComp 2015 International Conference on Modeling, Simulation and Visualization Methods. Las Vegas, NV, USA. 71. Shen, L., Moreland, J., Viswanathan, C., and Zhou, C.Q., 2015, “Development of Educational Virtual Reality Modules for Underground Fuel Pipeline Failure,” WorldComp 2015 International Conference on Modeling, Simulation and Visualization Methods. Las Vegas, NV, USA. 72. Okosun, T., Liu, X., Liu, Y., Dekker, J., Moreland, J., and Zhou, C.Q., 2015, “Development of a Wake Simulator for Wind Energy Analysis,” Proceedings of 2015 Summer Simulation Multi-Conference, Chicago, IL, USA (7 pages). 73. Wang, J., Phillips, L., Moreland, J., Wu, B., and Zhou, C.Q., 2015, “Simulation and Visualization of Industrial Processes in Unity,” Proceedings of 2015 Summer Simulation Multi-Conference, Chicago, IL, USA (7 pages). 74. Wang, T., Phillips, L., Wang, J., Fu, D., Moreland, J., Zhou, C.Q., Zhao, Y., and Capo, J.C., 2015, “Development of a Virtual Blast Furnace Training System,” Proceedings of METEC-ESTAD 2015 Conference, Dusseldorf, Germany (8 pages). 75. Okosun, T., Silaen, A.K., Wu, B., and Zhou, C.Q., 2015, “CFD Investigation of the Effects of Burden Conditions on Blast Furnace Performance,” Proceedings of METEC-ESTAD 2015 Conference, Dusseldorf, Germany (8 pages). 76. Sun, Y., Wu, B., Nollar, M., Cox, J., and Zhou, C.Q., 2015, “Life Prediction of a Roughing Mill Stand at a Steel Plant,” Proceedings of 2015 AISTech, Cleveland, OH, USA (10 pages). 77. Zhang, X., Wu, B., Silaen, A.K., Zhou, C.Q., and Bhattacharya, T., 2015, “CFD Analysis of Hot Metal Desulfurization Process for Improved Mixing in a Torpedo Vessel,” Proceedings of 2015 AISTech, Cleveland, OH, USA (14 pages). 78. Moreland, J., Zaraliakos, J.E., Campbell, W., Nakayama, S., Zhang, J., Arteaga, N., and Zhou, C.Q., 2015, “Interactive Incident Visualization for Steel Industry Safety Training,” Proceedings of 2015 AISTech – Iron and Steel Technology Conference, Cleveland, OH, USA (8 pages). 79. Tang, G., Wu, B., Gong, L., Silaen, A.K., Lash, J., Borges, E.K., and Zhou, C.Q., 2015, “Numerical Study of a Basic Oxygen Process Hydrodynamics,” Proceedings of 2015 AISTech, Cleveland, OH, USA (11 pages). 80. Okosun, T., Street, S.J., Chen, Y., Zhao, J., Wu, B., and Zhou, C.Q., 2015, “Investigation of Co-Injection of Natural Gas and Pulverized Coal in a Blast Furnace,” Proceedings of 2015 AISTech, Cleveland, OH, USA (14 pages). 81. Silaen, A.K., Okosun, T., Chen, Y., Wu, B., Zhao, J., Zhao, Y., D’Alessio, J., Capo, J.C., and Zhou, C.Q., 2015, “Investigation of High Rate Natural Gas Injection through Various Lance Designs in a Blast Furnace,” Proceedings of 2015 AISTech, Cleveland, OH, USA (14 pages). 82. Shen, H., Abramowitz, H., Moreland, J., and Zhou, C., 2015, “Visualization of Ternary Phase Diagrams Using Mobile Applications and 3D Printed Models,” Proceedings of 2015 AISTech – Iron and Steel Technology Conference, Cleveland, OH, USA (8 pages) 83. Wu, D., Zhou, P., Sun, Z., and Zhou, C.Q, 2015, “CFD analysis of lining erosion phenomenon at the outlet of top combustion hot blast stove,” Proceedings of 2015 AISTech – Iron and Steel Technology Conference, Cleveland, OH, USA (8 pages). 84. Silaen, A., Wu, B., and Zhou, C.Q, 2014, “Numerical Model of FGD Unit in Power Plant,” Proceedings of ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Canada (7 pages). 85. Dekker, J., Wang, J., Cao, M., Moreland, J., and Zhou, C.Q., 2014. “Consumer Virtual Reality for Collaborative Review of Power Plant Boiler Operation,” ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, Buffalo, NY, USA (4 pages). 86. Chen, Y., Wu, B., Chen, X., Okosun, A., Fu, D., Hensler, T.R., Zuke, D., Trenkinshu, S., and Zhou, C.Q., 2014. “Heat Transfer Analysis of Blast Furnace Tuyere through CFD Simulation,” 15th International Heat Transfer Conference, Kyoto, Japan (10 pages). 87. Chen, Y., Wu, B., Okosun, A., Fu, D., Zuke D., Trenkinshu, S., and Zhou, C.Q., 2014. “Tuyere Failure Analysis and Improvement through CFD Simulation,” AISTech 2014, Indianapolis, IN, USA (11 pages).
Chenn Q. Zhou Page 16 88. Fu, D., Chen, Y., Zhao, Y., D’Alessio, J., Ferron, K.J., and Zhou, C.Q., 2014. “CFD Investigation of the Effects of Iron Ore Reducibility and Coke Reactivity on Blast Furnace Operation,” AISTech 2014, Indianapolis, IN, USA (9 pages). 89. Walla, N., Wu, B., Cingle III, G., Roudabush, R.P., Rosser J.W., and Zhou, C.Q., 2014. “Life Prediction in Industrial Equipment,” AISTech 2014, Indianapolis, IN, USA (11 pages). 90. Moreland, J., Nakayama, S., Zhang, J., Yang, S. and Zhou, C.Q., 2014. “Enhancement of Steel Industry Safety Training through Incident Visualization,” AISTech 2014, Indianapolis, IN, USA (7 pages). 91. Zhan, S., Li, M., Zhou, J., Yang, J., Zhou, Y., and Zhou, C.Q., 2014 “A CFD-PBM coupled model predicting anodic bubble size distribution in aluminum reduction cells,” Proceedings of Light Metals, TMS Conference, Nashville, Tennessee, USA, pp. 777-782. 92. Silaen, A. and Zhou, C.Q., 2013. “Numerical Model of Thermoelectric Topping Cycle of Coal Fired Power Plant,” ASME 4th Micro/Nanoscale Heat and Mass Transfer International Conference, MNHMT 2013, Hong Kong, China (6 pages). 93. Moreland, J., Dubec, S., Okosun, T., Wang, X., and Zhou, C.Q., 2013, “A 3D Wind Turbine Simulator for Aerodynamics Education,” ASME International Mechanical Engineering Congress and Exposition, IMECE 2013, San Diego, CA, USA (6 pages). 94. Fan, L., Shen, L., Tang, G., Wu, B., Zhou, C.Q., and Heim, J., 2013, “Development of a Comprehensive Virtual Training Package for Power Plant Boiler,” ASME International Mechanical Engineering Congress and Exposition, IMECE 2013, San Diego, CA, USA (8 pages). 95. Tang, G., Wu, B., Johnson, K., Kirk, A., and Zhou, C.Q., 2013, “Simulation of an Industrial Tangentially Fired Boiler Firing Metallurgical Gases,” ASME International Mechanical Engineering Congress and Exposition, IMECE 2013, San Diego, CA, USA (9 pages). 96. Moreland, J., Wang, J., Liu, Y., Li, F., Shen, L., Wu, B., and Zhou, C.Q., 2013, “Integration of Augmented Reality with Computational Fluid Dynamics for Power Plant Training,” WorldComp 2013 International Conference on Modeling, Simulation and Visualization Methods. Las Vegas, NV, USA (5 pages). 97. Dekker, G., Zhang, Q., Moreland, J., and Zhou, C.Q., 2013, “MARWind: Mobile Augmented Reality Wind Farm Visualization,” WorldComp 2013 International Conference on Modeling, Simulation and Visualization Methods. Las Vegas, NV, USA (6 pages). 98. Fu, D., Moreland, J., Shen, L., Wu, B., and Zhou, C.Q., 2013, “Integration of Numerical Simulation Data with Immersive 3D Visualization,” WorldComp 2013 International Conference on Modeling, Simulation and Visualization Methods. Las Vegas, NV, USA (7 pages). 99. Fu, D., Chen, Y., and Zhou, C.Q., 2013, “Mathematical Modeling of Burden Distribution in a Blast Furnace,” MS&T 2013, October, 7 -12, Montreal, Quebec, Canada (8 pages). 100. Chen, Y., Fu, D., and Zhou, C.Q., 2013, “Numerical Simulation of the Co-injection of Natural Gas and Pulverized Coal in Blast Furnace,” AISTech 2013, Pittsburgh, PA, USA (8 pages). 101. Tang, G., Dang, H., Wu, B., Obias, T., Santos, J. R., Trzcinski, R., and Zhou, C.Q., 2013, “CFD Modeling of a Flooded Disc Scrubber,” AISTech 2013, Pittsburgh, PA, USA (9 pages). 102. Chen, X., Tang, G., Wu, B., Zhou, C.Q., Colella, C., and Duke, K., 2013, “Optimization of an Urea Decomposition Chamber using CFD and VR,” ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, USA (8 pages). 103. Tang, G., Silaen, A., Wu, B., Shi, X., Zhou, C.Q., Agnello-Dean, D., Wilson, J., Meng, Q., and Khanna S., 2013, “Numerical Simulation of an Industrial Fluid Catalytic Cracking Regenerator,” ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, USA (10 pages). 104. Silaen, A., Tang, G., Wu, B., Shi, X., Zhou, C.Q., Agnello-Dean, D., Wilson, J., Meng, Q., and Khanna S., 2013, “Numerical Simulation of an Industrial Fluid Catalytic Cracking Riser,” ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, USA (8 pages). 105. Fu D., Chen, Y., and Zhou, C.Q., 2013, “Numerical Methods for Simulation the Reduction of Iron Ore in Blast Furnace Shaft,” ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, USA (9 pages). 106. Lou, X., Zhang, Q., Zhou, C.Q., and Heim, J. E., 2012, “Development of a Virtual Power Plant Boiler for Training,” ASME 2012 Summer Heat Transfer Conference, Puerto Rico, USA (7 pages). 107. Fu, D., Chen, Y., Zhou, C.Q., Zhao, Y., and Lherbier, Jr, L. W., and Grindey, J. G., 2012, “CFD Modeling of Skull Formation in A Blast Furnace Hearth,” ASME 2012 Summer Heat Transfer Conf., Puerto Rico, USA (8 pages).
Chenn Q. Zhou Page 17 108. Zhang, Y., Wu, H., Liu, X., Zhou, C.Q., and Fu, Z., “Numerical Simulation of Different Coal Combustion in Two Tiny-Oil Ignition Burners with Oxygen-Enriched,” ASME 2012 Summer Heat Transfer Conference, July, 2012, Puerto Rico, USA (5 pages). 109. Ning, L., Zhou, C.Q., and Zhou, J., “Numerical Simulation of the Thermodynamic Process of the Molten Salt Furnace,” ASME 2012 Summer Heat Transfer Conference, July, 2012, Puerto Rico, USA (6 pages). 110. Pai, B., Wang, Y., Fu, D., and Zhou, C.Q., 2012, “Analysis and Visualization of Thermal stresses in exhaust manifolds,” ASME 2012 Summer Heat Transfer Conference, 2012, July 8-12, Puerto Rico, USA (6 pages). 111. Zhao, Y., Lherbier, Jr, L. W., Fu, D., Chen, Y., Zhou, C.Q., and Grindey, J. G., 2012, “The Impact of Design and Operating Parameters on Skull Formation in a Blast Furnace Hearth,” Proceedings of AISTech 2012, Atlanta, Georgia, USA (13 pages). 112. Fu D., Chen, Y., Rahman, Md.T., Zhao, Y., D'Alessio, J., Ferron, K. J., and Zhou, C.Q., 2012, “Validation of the numerical model for blast furnace shaft process,” Proceedings of AISTech 2012, Atlanta, Georgia, USA (11 pages). 113. Pang, S., Wu, B., Case, T., Bradfords, T., Brunt, M., Fabina, L., and Zhou, C.Q. “CFD Simulation of a Batch Anneal Furnace,” MS&T 2012, October, 7 -12, Pittsburgh, PA, USA (9 pages). 114. Yan, N., Okosun, T., Basak, S. K.., Fu, D., Moreland, J. M., and Zhou, C.Q., 2011, “Numerical Simulation and Virtual Reality Visualization of Horizontal and Vertical Axis Wind Turbines,” Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC2011, Washington, DC, USA (8 pages). 115. Viswanathan, C., Moreland, J., Guo, S., and Zhou, C.Q., 2011, “Usefulness of Virtual 3D Modeling to Visualize the Effect of Uncertain Data In Groundwater Solute Transport,” Proceedings of the ASME 2011 World Conference on Innovative Virtual Reality, WINVR2011, Milan, Italy (5 pages). 116. Lu, L., Wang, X., Kothakapu, S., Moreland, J., and Zhou, C.Q., 2011, “Wind Field Simulation for Placement of Small Scale Wind Turbines on a College Campus,” Proceedings of the ASME 2011 World Conference on Innovative Virtual Reality, WINVR2011, Milan, Italy (8 pages). 117. Chen, B., Moreland, J., Zhou, C.Q., and Zhang, J., 2011, “Human Brain Functional MRI and DTI Visualization with Virtual Reality,” Proceedings of the ASME 2011 World Conference on Innovative Virtual Reality, W INVR2011, Milan, Italy (7 pages). 118. Fu, D., Zheng, D., Zhou, C.Q., D'Alessio, J., Ferron, K. J., and Zhao, Y., 2011, “Parametric Studies on PCI Performances,” Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, Honolulu, HI, USA (10 pages). 119. Chandramouli, V., Narayana, M., Duruvai, V., Guo, S., Moreland, J., Merwade, V., Zhou, C.Q., Song, A., Hu, Y., and Zhang, F., 2011, “Generalized Visualization Modules for Solute Transport in Groundwater,” 9th Symposium on Groundwater Hydrology, Quality, and Management EWRI ASCE Conference, Palm Springs, CA, USA, pp. 934-942. 120. Leu, C. L., Alvarez, P., and Zhou, C.Q., 2011, “CFD Simulation of Liquid Level in the Blast Furnace Hearth,” AISTech 2011, Indianapolis, IN, USA, pp. 447-454. 121. Wu, B., Huang, D., Roesel, T., and Zhou, C.Q., 2011, “CFD Simulation of a Spray Cooling System at a Blast Furnace Top,” AISTech 2011, Indianapolis, IN, USA (10 pages). 122. Fu, D., Chen, Y., Rahman, M. T., Zhou, C.Q., D'Alessio, J., Ferron, K. J., and Zhao, Y. F., 2011, “Prediction of the Cohesive Zone in a Blast Furnace,” AISTech 2011, Indianapolis, IN, USA (14 pages). 123. Wu, B., Huang, D., Ratko, D., and Zhou, C.Q., 2010, “CFD and VR Application in Coal Fired Power Generation Components,” Proceedings of the 2010 ASME International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, British Columbia, Canada. 124. Zheng, D., Zhang, S., Fleitz, J., Trajkovski, R., and Zhou, C.Q., 2010, “CFD Investigation Of A Hydrogen Reformer Furnace For Improved Flow Distribution,” Proceedings of the 2010 ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada (9 pages). 125. Huang, D., Wu, B., Magner, J., Gonzalez, M. R., and Zhou, C.Q., 2010, “Numerical Analysis of a Hydrotreater Furnace Inlet Piping System,” Proceedings of the 2010 ASME International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, British Columbia, Canada (8 pages). 126. Zheng, D., Wu, B., Fleitz, J., Trajkovski, R., and Zhou, C.Q., 2010, “CFD Simulation of a Hydrogen Reformer Furnace,” 2010 14th International Heat Transfer Conf., Washington, DC, USA, pp. 233-244. 127. Wu, B., Huang, D., Ratko, D., and Zhou, C.Q., 2010, “CFD and VR Application in Coal Fired Power Generation Components,” Proceedings of IDMME – Virtual Concept 2010, Bordeaux, France (6 pages).
Chenn Q. Zhou Page 18 128. Moreland, J., Wu, B., and Zhou, C.Q., 2010, “Venturi Scrubber Analysis and Optimization with Computational Fluid Dynamics and Virtual Reality,” Proceedings of IDMME – Virtual Concept 2010, Bordeaux, France (11 pages). 129. Tian, F., Huang, D., and Zhou, C.Q., 2010, “Numerical Simulation of Sinter Cooling Process,” proceedings of 14th International Heat Transfer Conference (IHTC14), Washington, DC, USA, pp. 817-821. 130. Fu, D., Wu, B., Chen, G., Moreland, J., Tian, F., Hu, Y., and Zhou, C.Q., 2010, “Virtual Reality Visualization of CFD Simulation For Iron/Steelmaking Processes,” proceedings of 14th International Heat Transfer Conference (IHTC14), Washington, DC, USA, pp. 761-768. 131. Wu, B., Chen, G., Fu, D., Moreland, J., and Zhou, C.Q., 2010, “Integration of Virtual Reality with Computational Fluid Dynamics for Process Optimization,” AIP Conf. Proc. 2010, 1207: pp. 1017-1023. 132. Chen, G., Moreland, J., Ratko, D., Jin, L., Shen, H., Wu, B., and Zhou, C.Q., 2010, “Virtual Reality for Engineering Applications,” Proceedings of ASME World Conference on Innovative Virtual Reality, Ames, Iowa, USA, WINVR2010-3757, pp. 127-135. 133. Chen, B., Moreland, J., and Zhou, C.Q., 2010, “Human Brain Diffusion Tensor Imaging Visualization with Virtual Reality,” Proceedings of ASME World Conference on Innovative Virtual Reality, Ames, Iowa, USA, WINVR2010-3761, pp. 137-143. 134. Wu, B., Chen, G., Moreland, J., Huang, D., Zheng, D., and Zhou, C.Q., 2010, “Industrial Application of CFD Simulation and VR Visualization,” Proceedings of ASME World Conference on Innovative Virtual Reality, Ames, Iowa, USA. WINVR2010-3734, pp. 51-59. 135. Chen, G., Moreland, J., Ratko, D., Jin, L., Shen, H., Wu B., and Zhou, C.Q., 2010, “Virtual Reality Development for Engineering Applications,” ASME WINVR2010, Ames, IA, USA, pp. 127-135. 136. Wu, B., Zheng, D., Chen, N., Lu, D., and Zhou, C.Q., 2010, “Numerical Investigation and Optimization of a Venturi Scrubber,” AISTech 2010, Pittsburgh, PA, USA, 1: pp. 667-678. 137. Wu, B., Ratko, D., Ren, R., Hu, Y., Jin, L., and Zhou, C.Q., 2010, “Development of a Virtual Reality Blast Furnace Package Using CFD,” AISTech 2010, Pittsburgh, PA, USA, 1: pp. 617-628. 138. Fu, D., Huang, F., Tian, F., and Zhou, C.Q., 2010, “Burden Descending and Redistribution in a Blast Furnace,” AISTech 2010, Pittsburgh, PA, USA, 1: pp. 693-700. 139. Zhou P., Huang, D., and Zhou, C.Q., 2009, “Effects of Operation Parameters on Drainage Behavior in a Blast Furnace Hearth,” Proceeding of the 5 International Congress on the Science and Technology of Ironmaking, Shanghai, China, pp. 695-699. 140. Huang, D., and Zhou, C.Q., 2009, “3-D CFD Blast Furnace Hearth Model,” Proceeding of the 5th International Congress on the Science and Technology of Ironmaking, Shanghai, China, pp. 840-847. 141. Fu, D., Wu, B., Moreland, J., Chen, G., and Zhou, C.Q., 2009, “CFD Simulations and VR Visualization for Process Design and Optimization,” Proceedings of the Inaugural US-EU-China Thermophysics Conference, Beijing, China, UECTC-RE (7 pages). 142. Fu, D., Tian, F., Sotiroglou, K., and Zhou, C.Q., 2009, “The Numerical Analysis of Flow Behavior Inside the Blast Furnace,” Proceedings of 2009 ASME Summer Heat Transfer Conference, San Francisco, California, USA, pp. 797-805. 143. Fu, Z., Wang, M., Zhou, C.Q., Peng, G., and Yang, G., 2009, “Research on the Numerical Simulation and the Structure Optimization of the Tiny-Oil Ignition Burner,” ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009), Lake Buena Vista, Florida, USA, pp. 167-172. 144. Zhou, P., Wu, B., Hu, Y., Zheng, D., Fleitz, J., Trajkovski R., and Zhou, C.Q., 2009, “CFD Study For Air Distribution In Hydrogen Reformer Furnace,” Proceedings of the 2009 ASME Summer Heat Transfer Conference, San Francisco, California, USA, pp. 183-191. 145. Wu, B., Chen, G.H., Fu, D., Moreland, J., and Zhou, C.Q., 2009, “Integration Of Virtual Reality With Computational Fluid Dynamics For Process Optimization,” The 6th International Symposium On Multiphase Flow, Heat Mass Transfer and Energy Conversion, AIP (American Institute of Physics) Conf. Proc., 1207(1): pp. 1017-1023. 146. Wu, B., Roesel, T., Kokal, H.R., and Zhou, C.Q., 2009, “3D Numerical Simulation Of A Chemical Leaching Tank at ArcelorMittal for Improved Solids Suspension—Part II,” AISTech 2009 - Iron and Steel Technology Conference Proceedings, St. Louis, Mo., USA, pp. 247-258. 147. Fu, D., Wu, B., Moreland, J., Chen, G., Ren S., and Zhou, C.Q., 2009, “Virtual Reality Visualization of Typical Processes in Blast Furnace,” AISTech 2009 - Iron and Steel Technology Conference Proceedings, St. Louis, Mo., USA, 1: pp. 307-314.
Chenn Q. Zhou Page 19 148. Huang, D., Tian, F., Chen, N., and Zhou, C.Q., 2009, “A Comprehensive Simulation of the Raceway Formation and Combustions,” AISTech 2009 - Iron and Steel Technology Conference Proceedings, St. Louis, Mo., USA, 1: pp. 333-344. 149. Wu, B., Roesel, T., Elnenaey, A., Johnson, K., Atkinson, M., and Zhou, C.Q., 2009, “Numerical simulation of a direct fired preheating furnace,” 2009 AISTech - Iron and Steel Technology Conference Proceedings, 2: pp. 227-238. 150. Wu, B., Roesel, T., Arnold, A. M., Xu, Z., Arnold, E., Downey, G. III, and Zhou, C.Q., 2008, “CFD Analysis of Batch-Type Reheating Furnace for Improved Heating Performance,” Proceedings of the 2008 ASME International Mechanical Engineering Congress and Exposition, Boston, Massachusetts, USA, pp. 139-148. 151. Fu, D., Huang, D., Juma, A., Schreiber, C.M., Wang, X., and Zhou, C.Q., 2008, “Numerical Simulation of Thermal Stress For A Liquid-Cooled Exhaust Manifold,” ASME 2008 International Mechanical Engineering Congress and Exposition, Boston, Massachusetts, USA, 10: pp. 725-733. 152. Tian, F., Walker, W., Dave, P., Sun, L., and Zhou, C.Q., 2008, “Modeling of Pulverized Coal Combustion Inside Blast Furnace Tuyere,” Proceedings of the 2008 ASME International Mechanical Engineering Congress and Exposition, Boston, Massachusetts, USA. 153. Walker, W., Gu, M., Selvarasu, N., D’Alessio, J., Macfadyen, N., and Zhou, C.Q., 2008, “Methodology for the Numerical Simulation of Natural Gas, Coal, and Coke Combustion in A Blast Furnace,” 2008 Proceedings of the ASME Summer Heat Transfer Conference, Jackonsville, Florida, USA, 3: pp. 215-223. 154. Wu B., Roesel, T., Arnold, A.M., Xu, Z., Arnold, E., Downey, G., and Zhou, C.Q., 2008, “CFD Analysis of Batch-Type Reheating Furnace with Regenerative Burners,” Proceedings of 2008 ASME Summer Heat Transfer Conference, Jackonsville, Florida, USA, pp. 225-234. 155. Tian, F., Sun, L., Gu, M., Zhao, Y., and Zhou, C.Q., 2008, “Numerical Analysis on Pulverized Coal Combustion in the Blast Furnace Raceway,” AISTech 2008 - Proceedings of the Iron and Steel Technology Conference, Pittsburgh, PA, USA (9 pages). 156. Zheng, L., Deshpande, R., Zhou, C.Q., Huang, D., and Chaubal, P., 2008, “Prediction of Blast Furnace Hearth Inner Profiles,” Proceedings of AISTech 2008, Pittsburgh, PA, USA (9 pages). 157. Wu, B., Roesel, T., Patil, K., Kokal, H.R., and Zhou, C.Q., 2008, “3D Numerical Simulation of a Chemical Leaching Tank at ArcelorMittal for Improved Solids Suspension,” Proceedings of AISTech 2008, Pittsburgh, PA, USA (9 pages). 158. Walker, W., Gu, M., Selvarasu, N., D’Alessio, J., Macfadyen, N., and Zhou, C.Q., 2008, “Simulation of Natural Gas and Pulverized Coal Combustion In A Blast Furnace and Their Effects on Coke Consumption in the Raceway,” Proceedings of AISTech 2008, Pittsburgh, PA, USA (12 pages). 159. Wu, B., Arnold, A. M., Xu, Z., Arnold, E., Downey, G., and Zhou, C.Q., 2008, “CFD Optimization of Reheating Furnaces,” Proceedings of AISTech 2008, Pittsburgh, PA, USA (9 pages). 160. Walker, W., Farhadi, A., Tsvik, G., Roesel, T., Selvarasu, N. K., Siow, Y., and Zhou, C.Q., 2007, “3-D Computational Fluid Dynamic Analysis of Bustle Gas Combustion in a Direct Reduced Iron Plant,” Proceedings of 2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, USA, 6: pp. 745-752. 161. Wu, B., Arnold, A. M., Arnold, E., Downey, G., and Zhou, C.Q., 2007, “CFD Analysis of Batch-Type Reheating Furnace,” Proceedings of 2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, USA, pp. 753-759. 162. Gu, M., Selvarasu, N.K.C., Walker, W., Zhao, Y., and Zhou, C.Q., 2007, “Numerical Analysis on Pulverized Coal Combustion in the Raceway of a Blast Furnace,” Processing of ASME-JSME Thermal Engineering and Summer Heat Transfer Conference. 163. Huang, D., Zhang, Y., Deshpande, R., Chaubal, P., Zhou, C.Q., 2007, “Simulation of the Hearth Draining Process and Thermal Stress of a BF Hearth,” Proceedings of AISTech 2007, Indianapolis, IN, USA, 1: pp. 475-485. 164. Walker, W., Gu, M., Selvarasu, N.K.C., D'Alessio, J., Macfadyen, N., and Zhou, C.Q., 2007, “Numerical Study of Pulverized Coal Injection with Natural Gas Co-Injection in a Blast Furnace,” Proceedings of AISTech 2007, IN, USA, 1: pp. 453-462. 165. Roldan, D., Zhang, Y., Deshpande, R., Huang, D., Chaubal, P., and Zhou, C.Q., 2007, “3-D CFD Analysis for Blast Furnace Hearth Wear,” Proceedings of AISTech 2007, Indianapolis, IN, USA, 4(3): pp. 43-50.
Chenn Q. Zhou Page 20 166. Zhang, Y., Deshpande, R., Huang, D., Chaubal, P., and Zhou, C.Q., 2007, “Prediction of the Inner Profile of a Blast Furnace Hearth,” Proceedings of AISTech 2007, Indianapolis, IN, USA, 1: pp. 587-595. 167. Li, B., Yin, H., Balajee, S.R., Chaubal, P., and Zhou, C.Q., 2007, “CFD Analysis on Behavior of Slag - Steel Interface in an Argon Gas Stirred Ladle,” Proceedings of AISTech 2007, Indianapolis, IN, USA, 1: pp. 1355-1367. 168. Gu, M., Selvarasu, N.K., Huang, D., Chaubal, P., and Zhou, C.Q., 2007, “Numerical Analysis on the Coke Combustion Inside Raceway,” Proceedings of AISTech 2007, Indianapolis, IN, USA, 1: pp. 609-618. 169. Selvarasu, N.K., Gu, M., Zhou, C.Q., and Zhao, Y., 2007, “Computer Modeling of Blast Furnace Raceway Formation Kinetics,” Proceedings of AISTech 2007, Indianapolis, IN, USA, 1: pp. 425-433. 170. Chaubal, P. C., and Zhou, C. Q., 2006, “Advances in Understanding of Phenomena in the Blast Furnace Hearth,” 2006 TMS Fall Extraction and Processing Division: Sohn International Symposium: Advanced Processing of Metals and Materials - Proceedings of the International Symposium, San Diego, CA, USA, 2: pp. 133-144. 171. Chaubal, P., Huang, D., Roldan, D., and Zhou, C. Q., 2006, “Development of 3-D CFD Model for Blast Furnace Hearth,” 2006 TMS Fall Extraction and Processing Division: Sohn International Symposium: Advanced Processing of Metals and Materials - Proceedings of the International Symposium, San Diego, CA, USA, 7: pp. 233-244. 172. Gu, M., Chen, Z., Selvarasu, N.K., Huang, D., Chaubal, P., and Zhou, C. Q., 2006, “Simulation of Pulverized Coal Injection in a Blast Furnace,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, USA, pp. 267-273. 173. Ridenour, P., Ma, Z., Selvarasu, N. K., Smotkin, E. S., and Zhou, C. Q., 2006, “CFD Simulations of Flow and Pressure Distributions in Column Flow Type Fuel Cells,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, Heat Transfer, Chicago, IL, USA, pp. 567-572. 174. Selvarasu, N.K., Huang, D., Chen, Z., Gu, M., Zhao, Y., Chaubal, P., and Zhou, C. Q., 2006, “Prediction of Raceways in a Blast Furnace,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, Power, Chicago, IL, USA, pp. 297-303. 175. Campbell, A.S., Ladendorf, J., and Zhou, C.Q., 2006, “CFD Analysis of Heat Exchanger and Aftercooler for Diesel Marine Engines,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, Heat Transfer, Chicago, IL, USA, pp. 573-579. 176. Golchert, B., Ridenour, P., Walker, W., Gu, M., and Zhou, C.Q., 2006, “Effects of Nitrogen and Oxygen Concentration on NOx Emissions in an Alumunium Furnace,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, Power, Chicago, IL, USA, pp. 323-333. 177. Golchert, B., Ridenour, P., Selvarasu, N.K., Milovac, P., and Zhou, C.Q., 2006, “Heat loss analysis of dross removal in an aluminum furnace,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, Power, Chicago, IL, USA, pp. 315-322. 178. Zhang, Y., Deshpande, R., Huang, D., Chaubal, P., and Zhou, C.Q., 2006, “A Methodology for Blast Furnace Hearth Wear Analysis,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, Heat Transfer, Chicago, IL, USA, pp. 531-538. 179. Gu, M., Chen, Z., Huang, D., Chaubal, P., and Zhou, C.Q., 2006, “Heat Transfer, Devolatilization and Combustion of Injected Coal before Entering Raceways,” Proceedings of AISTech 2006, San Diego, CA, USA, 1: pp. 345-355. 180. Huang, D., Milovac, P., Chen, Z., Zhao, Y., Chaubal, P., and Zhou, C.Q., 2006, “Analysis of Liquid Level and Profile inside the Hearth of a Blast Furnace,” Proceedings of AISTech 2006, San Diego, CA, USA, 1: pp. 157-165. 181. Ridenour, P., Yin, H., Tetrault, C., Balajee, S. R., Chaubal, P., and Zhou, C.Q., 2006, “CFD Study on Slag- Steel Interaction in an Argon Bottom-Stirred Ladle,” Proceedings of AISTech 2006, San Diego, CA, USA, 1: pp. 721-729. 182. Yan, F., Zhou, C.Q., Huang, D., and Chaubal, P., 2005, “Numerical Investigation of Cooling Strategy for Reducing Blast Furnace Hearth Erosions,” Proceedings of the ASME Summer Heat Transfer Conference, San Francisco, California, USA, 3: pp. 189-199. 183. Roldan, D., Tetrault, C., Zhao, Y., Atkinson, M., and Zhou, C.Q., 2005, “Heat Transfer Analysis in a Blast Furnace Tuyere Nose,” Proceedings of the ASME Summer Heat Transfer Conference, San Francisco, California, USA, 3: pp. 179-187.
Chenn Q. Zhou Page 21 184. Roldan, D., Yan, F., Zhou, C.Q., Tripathi, M., Laurendeau, N., and Lucht, R., 2005, “Temporal Species Concentrations in a Water Model of a Blast Furnace Hearth,” Energy Conversion and Resources 2005, Orlando, Florida, USA, pp. 325-333. 185. Khalid, M., Zhou, C.Q., Bassi, A., Wang S.M., Gerber, H., and Tseng, C., 2005, “Heat Transfer Analysis of Human Cell Culture under RF Exposure,” Proceedings of the ASME Summer Heat Transfer Conference, San Francisco, California, USA, 3: pp. 641-649. 186. Golchert, B.M., Zhou, C.Q., Quenette, A., Han, Q., and King, P.E., 2005, “Combustion Space Modeling of an Aluminum Furnace,” TMS Light Metals 2005, San Francisco, California, USA, pp. 887-892. 187. Zhou, C.Q., Yan, F., Roldan, D., Huang, D., Chaubal, P., and Zhao, Y., 2005, “Evaluation of Internal Conditions in a Blast Furnace Hearth Using a 3-D CFD Model,” Proceedings of AISTech 2005, Charlotte, North Carolina, USA, 1: pp. 283-292. 188. Huang, D., Yan, F., Millovachi, P., Chaubal, P., and Zhou, C.Q., 2005, “Numerical Investigation of Transient Hot Metal Flows in a Blast Furnace Hearth,” Proceedings of AISTech 2005, North Carolina, USA, 1: pp. 199-207. 189. Huang, D., Chaubal, P., Abramowitz, H., and Zhou, C.Q., 2005, “Hearth Skulls and Hearth Wear Investigation of Ispat Inland's #7 Blast Furnace,” Proceedings of AISTech 2005, Charlotte, North Carolina, USA, 1: pp. 101-112. 190. Zhao, Y., Atkinson, M., Crosmun, H. E., Tetrault, C., Roldan, D., and Zhou, C.Q., 2005, “Investigation of Tuyere Nose Failures at U. S. Steel Great Lakes Works B2 Blast Furnace,” Proceedings of AISTech 2005, Charlotte, North Carolina, USA, 1: pp. 491-496. 191. Golchert, B.M., and Zhou, C.Q., 2004, “The Effect of Glass Foam on Heat Transfer in a Glass Furnace,” 2nd International Energy Conversion Engineering Conference, Rhode Island, USA, 3: pp. 1780-1788. 192. Chang, S., Golchert, B., and Zhou, C.Q., 2004, “Computer Modeling of Glass Furnace Flow and Heat Transfer,” Ceramic Transactions, Advances in Fusion and Processing of Glass III, 141: pp. 399-411. 193. Patnala, A.K., Zhou, C.Q., and Zhao, Y., 2004, “Numerical Investigation on Cooling Strategies in a Commercial Blast Furnace Hearth,” Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, Charlotte, North Carolina, USA, 2: pp. 543-550. 194. Nnanna, A.G.A., Mehok, T.J., Stella, D., Ahmed, U., Roldan, D., Zhou, C.Q., and Chuabal, P., 2004, “Experimental Cold Flow Water Model of a Blast Furnace Hearth: PartI,” Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, Charlotte, North Carolina, USA, 3:pp. 187-193. 195. Nnanna, A.G.A., Uludogan, A., Roldan, D., Zhou, C.Q., Chuabal, P., and Huang, D., 2004, “Water Model of a Blast Furnace Hearth for Flow Pattern Investigation,” Proceedings of AISTech 2004, Nashville, TN, USA, 1: pp. 35-46. 196. Tetrault, C., Roldan, D., Zhou, C.Q., and Yin, H., 2004 “CFD Analysis of Thermal Behavior of Refractory in Steel Ladle Cycling,” Proceedings of AISTech 2004, Nashville, TN, USA, 1: pp. 1205-1214. 197. Yan, F., Zhou, C.Q., Huang, D., Chaubal, P., and Zhao, Y., 2004, “3-D Computational Modeling of a Blast Furnace Hearth,” Proceedings of AISTech 2004, Nashville, TN, USA, 1: pp. 249-260. 198. Zhou, C.Q., Yan, F., Patnala, K.A., Roldan, D., Huang, D., Chaubal, P., and Zhao, Y., 2004, “Numerical Investigation of Parametric Effects on a Blast Furnace Hearth,” AISTech 2004 - Iron and Steel Technology Conference Proceedings, Nashville, TN, USA, 1: pp. 77-87. 199. Kin, Y., Zhou, C.Q., Parsons, B., Roades, E., Sutin, A., Chaubal, P., and Huang, D., 2004 “Assessment of Accumulated Structural Damage Using Impulse Resonant Acoustic Spectroscopy,” Proceedings of AISTech 2004, Nashville, TN, USA, 2: pp. 895-901. 200. Yan, F., Zhou, C.Q., Huang, D., and Chaubal, P., 2004, “Validation of CFD Model for Hot Metal Flow and Heat Transfer Simulation in a Blast Furnace,” Energy Conversion and Resources 2004: Fuels and Combustion Technologies, Energy, Nuclear Engineering, Anaheim, California, USA, pp. 27-35. 201. Yan, F., Zhou, C.Q., Huang, D., and Chaubal, P., 2004, “Numerical Modeling of Hot Metal Flow and Heat Transfer in a Blast Furnace,” Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, Charlotte, North Carolina, USA, 2: pp. 335-343. 202. Yan, F., Zhou, C.Q., Huang, D., and Chaubal, P., 2004, “Numerical Investigation of Effects of Dead Zone Shape on the Blast Furnace Hearth,” 2nd International Energy Conversion Engineering Conference, Providence, Rhode Island, USA, 1: pp. 292-300.
Chenn Q. Zhou Page 22 203. Tetrault, C., Young, S., Roldan, D., Zhou, C.Q., and Yin, H., 2004, “CFD Analysis of Heat Loss in Steel Ladle Cycling,” 2nd International Energy Conversion Engineering Conference, Providence, Rhode Island, USA, 3: pp. 1804-1811. 204. Patnala, A.K., Yan, F., Zhou, C.Q., Huang, D., and Chaubal, P., 2004, “Temperature Monitoring Strategies Using CFD Analysis,” 2nd International Energy Conversion Engineering Conference, Providence, Rhode Island, USA, 1: pp. 301-310. 205. Vernengo, S., Milanovic, R., Zhou, C.Q., Chaubal, P., and Huang, D., 2003, “Computations of Liquid Flow and Heat Transfer in the Hearth of A Blast Furnace,” Proceedings of ASME Heat Transfer Division: Aerospace Heat Transfer, Computational Heat Transfer, Education, Fire and Combustion, 374(1): pp. 361- 370. 206. Chang, S.L., Zhou, C.Q., and Scheeringa, K., 2003, “Numerical Simulations of Industrial Melting Furnaces,” Proceedings of ASME Summer Heat Transfer Conference, Las Vegas, Nevada, USA, 2: pp. 103-110. 207. Chang, S.L., Zhou, C.Q., and Scheeringa, K., 2003, “Numerical Evaluation of the Impacts of Burner Operations on the Thermal Efficiency of Industrial Furnaces,” TMS Annual Meeting, Energy Efficient Manufacturing Processes, San Diego, California, USA, pp. 15-26. 208. Milanovic, R., Zhou, C.Q., Majdak, J., and Cantwell, R., 2003, “CFD Modeling of Flow and Heat Transfer inside A Liquid-Cooled Exhaust Manifold,” Proceedings of the 2003 ASME Summer Heat Transfer Conference, Las Vegas, Nevada, USA, 3: pp. 785-792. 209. Golchert, B., Chang, S. L., Zhou, C.Q., and Wang, J., 2003, “Modeling of Regenerative Furnace Ports,” Proceedings of the ASME Heat Transfer Division: Aerospace Heat Transfer, Computational Heat Transfer, Education, Fire and Combustion, 374(1): pp. 423-430. 210. Golchert, B.M., Chang, S., Zhou, C.Q., 2003, “The Effect of Gases Emitted from Batch/Glass Reactions on the Combustion Space Flow Field,” Proceedings of the ASME Summer Heat Transfer Conference, Las Vegas, Nevada, USA, 2: pp. 137-144. 211. Chang, S.L., and Zhou, C.Q., 2002, “Impacts of Radiation Heat Transfer on NOx Calculation in Industrial Furnaces,” Proceedings of the 37th Intersociety Energy Conversion Engineering Conference, IECEC, Washington, D.C., USA, pp. 485-490. 212. Chang, S.L., Zhou, C.Q., and Golchert, B., 2002, “A Simulation Approach for Bubble Flow in A Glass Melter,” Proceedings of the Heat Transfer Division : Heat Transfer in Energy Systems, Fire and Combustion, Portland, OR, USA, 372(3): pp. 155-162. 213. Golchert, B., Chang, S.L., and Zhou, C.Q., 2002, “Modeling of Radiation Heat Transfer in Glass Melts,” Proceedings of the Heat Transfer Division - Heat Transfer in Energy Systems, Fire and Combustion, Portland, OR, USA, 372(3): pp. 71-78. 214. Su, K., and Zhou, C.Q., 2002, “Numerical Study of Operability of Combustor with Inflow Oscillations,” American Society of Mechanical Engineers, Fuels and Combustion Technologies Nuclear Engineering, Peoria, IL, USA, pp. 1-8. 215. Su, K., and Zhou, C.Q., 2002, “Numerical Study Of Aerodynamic Interaction of Compressor and Combustor Flows,” Proceedings of the 37th Intersociety Energy Conversion Engineering Conference, IECEC, Washington, D.C., USA, pp. 431-437. 216. Scheeringa, K.W., Zhou, C.Q., Chang, S., 2002, “A Numerical Investigation of Combustion Parameters In Various Industrial Furnaces,” Proceedings of the 37th Intersociety Energy Conversion Engineering Conference, IECEC, Washington, D.C., USA, pp. 412-417. 217. Bowman, B. J., Zhou, C.Q., and Chang, S.L., 2002, “A Numerical Study Of Multicomponent Vaporization Effects in FCC Riser Reactors,” Proceedings of 37th Intersociety Energy Conversion Engineering Conference, IECEC, Washington, D.C., USA, pp. 525-530. 218. Kresovic, U., Hussein, W., Zhou, C.Q., Majdak, J., and Cantwell, R., 2002, “CFD analysis of Liquid- Cooled Exhaust Manifolds in a Real Engine Cycle,” Proceedings of Heat Transfer Equipment Aerospace Heat Transfer, Heat Transfer in Multiphase Systems, Gas Turbine Heat Transfer, New Orleans, Louisiana, USA, 372(4): pp. 39-46. 219. Bowman, B.J., Zhou, C.Q., and Chang, S.L., 2002, “An Investigation of Mulicomponent Droplet Vaporization in Fluidized Catalytic Cracking Risers,” Proceedings of Heat Transfer Equipment Aerospace Heat Transfer, Heat Transfer in Multiphase Systems, Gas Turbine Heat Transfer, New Orleans, Louisiana, USA, 372(4): pp. 163-170.
Chenn Q. Zhou Page 23 220. Chang, S.L., Golchert, B., Zhou, C.Q., and Patrick, M., 2001, “An Investigation of the Effects of Firing Patterns on Heat Transfer and NOx Formation in a Glass Furnace,” Proceedings of the 2001 National Heat Transfer Conference, Anaheim, California, USA, 2: pp. 1779-1787. 221. Chang, S.L., Zhou, C.Q., Lottes, S.A., Bowman, B., and Petrick, M., 2001, “Numerical Analysis of Commercial-Scale FCC Riser Reactors,” Proceedings of the 2001 National Heat Transfer Conference, Anaheim, California, USA, 2: pp. 1795-1803. 222. Chang, S.L., Zhou, C.Q., Golchert, B., and Petrick, M., 2001, “Simulation of Multi-Phase Glass-Melt Flows in A Glass Melter,” Proceedings of the Heat Transfer Division- Combustion and Energy Systems, 369(4): pp. 73-80. 223. Golchert, B., Chang, S.L., Patrick, M., and Zhou, C.Q., 2001, “Validation of the Combustion Space Simulation of A Glass Furnace Model,” Proceedings of the Heat Transfer Division: Combustion and Energy Systems, 369(4): pp. 31-39. 224. Su, K., and Zhou, C.Q., 2000, “Parametric Studies of Gas Turbine Combustion Nox Emissions Using KIVA with a Reduced Mechanism,” Proceeding of the International Mechanical Engineering Congress and Exposition, Heat Transfer Division, New York, New York, USA, 365(2): pp. 245-254. 225. Chang, S.L., Zhou, C.Q., Lottes, S.A., and Petrick, M., 2000, “Numerical Evaluation of Advanced Multi- Stage FCC Units,” International Mechanical Engineering Congress and Exposition, Orlando, FL, USA, 367: pp. 69-78 226. Golchert, B., Zhou, C.Q., Chang, S.L., and Petrick, M., 2000, “Investigation of Spectral Radiation Heat Transfer and NOx Emission in A Glass Furnace,” International Mechanical Engineering Congress and Exposition, Orlando, FL, USA, pp. 115-122. 227. Su, K., and Zhou, C.Q., 2000, “Numerical Modeling of Gas Turbine Combustor Integrated with Diffuser,” Proceedings of the 34th National Heat Transfer Conference, Pittsburgh, PA, USA, pp. 1-8. 228. Chang, S.L., Zhou, C.Q., Golchert, B., and Petrick, M., 2000, “Investigation of Radiation Heat Transfer Effects on NOX Emission in a Glass Furnace,” Proceedings of the 34th National Heat Transfer Conference, Pittsburgh, PA, USA, pp. 1-8. 229. Chang, S.L., Zhou, C.Q., Lottes, S. A., and Petrick, M., 2000, “Investigation of the Interfacial Heat Transfer Effects on Product Yields of a Commercial Scale FCC Riser Reactor,” Proceedings of the 34th National Heat Transfer Conference, Pittsburgh, PA, USA, pp. 1-8. 230. Chang, S.L., Golchert, B., Lottes, S. A., Zhou, C.Q., Huntsinger, A., and Petrick, M., 1999, “Effect of Particle Inlet Conditions on FCC Riser Hydrodynamics and Product Yields,” ASME Heat Transfer Division, 364(2): pp. 373-380. 231. Su, K., and Zhou, C.Q., 1999, “Numerical Study of Spray Parametric Effects on Gas Turbine Combustion Performance,” American Society of Mechanical Engineers, 364(2): pp. 345-354. 232. Martin, K., Gonzalez, E., Zhou, C.Q., and Livengood, C.D., 1999, “Elemental Mercury Removal Using a Wet Scrubber,” Proceedings of the American Power Conference, 61(1): pp. 180-185. 233. Chang, S.L., Zhou, C.Q., Lottes, S.A., Golchert, B., and Petrick, M., 1998, “Numerical investigation of the scaled-up effects on flow, heat transfer, and kinetics processes of FCC units,” American Society of Mechanical Engineers, Heat Transfer Division, 361(2): pp. 73-81. 234. Chang, S.L., Lottes, S.A., Zhou, C.Q., and Petrick, M.,1998, “Numerical study of short residence time FCC riser flows with a new flow/kinetics modeling technique,” Proceedings of ASME Heat Transfer Division, 361(2): pp. 83-90. 235. Chang, S.L., Lottes, S.A., Zhou, C.Q., Golchert, B., and Petrick, M., 1998, “Interactions of Multi-Phase Hydrodynamics, Droplet Evaporation, and Chemical Kinetics in FCC Riser Reactors,” Proceedings of ASME Heat Transfer Division, 357(1): pp. 261-269. 236. Chang, S.L., Lottes, S.A., Zhou, C.Q., and Petrick, M., 1997, “A Hybrid Technique for Coupling Chemical Kinetics and Hydrodynamics Computations in Multi-Phase Reacting Flow Systems,” Proceedings of ASME Heat Transfer Division, 352: pp. 149-157. 237. Zhou, C.Q., Neal, L.G., Bolli, R., Haslbeck, J., and Chang, A., 1996, “Control of NOx Emissions by NOx Recycle Approach,” Symposium (International) on Combustion, 2: pp. 2091-2097. 238. Chang, S.L., Lottes, S.A., Zhou, C.Q., and Petrick, M., 1996, “Evaluation of Multi-Phase Heat Transfer and Droplet Evaporation in Petroleum Cracking Flows,” Proceedings of the ASME Heat Transfer Division, 335(4): pp. 17-28.
Chenn Q. Zhou Page 24 239. Chang, S.L., Zhou, C.Q., Lottes, S.A., Bouillard, J.X., and Petrick, M., 1996, “Sectional Coupling Approach for the Simulation of Multi-Phase Reacting Flow in A Bent Reactor,” Proceedings of ASME Heat Transfer Division, 335(4): pp. 361-374. 240. Zhou, Q., and Yao, S.C., 1994, "Computation of Droplet Dispersions in Turbulent Two-Phase Flows Using the Group Splitting Approach,” Heat Transfer 1994, IChemE, 6: pp. 307-312. 241. Zhou, Q., and Yao, S.C., 1991, “Efficient Spray Modeling on Various Applications Using the Group Approach,” NIST Special Publication, 813: pp. 711-718. 242. Zhou, Q., and Yao, S.C., 1991, “Modeling of Impacting Spray Dynamics,” Proceedings of 3rd ASME JSME Therm Eng Jt Conf, pp. 135-140. 243. Zhou, Q., and Yao, S.C., 1990, “Group Model for Particle Dispersion in Turbulent Sprays,” ASME Heat Transfer Division, Heat and Mass Transfer in Fires and Combustion Systems, HTD, 148: pp. 27-32.
Invited Keynotes, Panel Talks, Presentations, Seminars, and Workshops: 1. “Interactive Simulators for Engineering Education”, presentation at the Panel on Recent Advancements and Discussions in Heat Transfer and Thermal Science Education, IMECE 2019, Salt Lake City, Nov. 11, 2019. 2. “Steel Industry R&D Priority”, one-day roundtable organized by DOE Advanced Manufacturing Office (by invitation only), Washington, DC, Nov. 6, 2019 3. “Simulation and Visualization for Energy Reduction in Steel Manufacturing”, presentation at AIST Energy and Utilities - Industry Insights and Fundamentals Workshop, Oak Ridge National Laboratory, Oak Ridge, TN, 7-10, October 2019 4. “Roundtable Discussion”, one of panelists, AIST Energy and Utilities - Industry Insights and Fundamentals Workshop, Oak Ridge National Laboratory, Oak Ridge, TN, 7-10, October 2019 5. “Steel Manufacturing Simulation and Visualization”, seminar at Stelco Lake Erie Works, Nanticoke, Ontario, Canada, Sept. 2019 6. “SMSVC overview”, keynote at 8th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2019), Toronto, Canada, August 13- 15, 2019. 7. “Steel Manufacturing Simulation and Visualization”, presentation at AISI 2019 General Meeting and SMA 2019 Annual Members Conference, Washington, DC, June 4, 2019 8. “Simulation and Visualization for Steel manufacturing”, seminar at Tata Steel Europe R &D, Amsterdam, Netherland, May 2019. 9. “Industrial Process simulation and visualization for energy reduction,” presentation at the NSF Industry- University Cooperative Research Center for Industrial Energy Efficiency Planning Meeting at Case Western Reserve University, May 2019 10. “Steel manufacturing Simulation and Visualization”, seminar at NLMK, Burns Harbor, IN, April 2109. 11. “VR and AR Visualization for Digital Transformation”, presentation at AIST digital transformation forum 2019, Pittsburgh, PA, March 25-28, 2019. 12. “Shaping the Future of Manufacturing with Simulation and Visualization “, seminar at Caterpillar Technical Center, Peoria, IL, February 11, 2019 13. “Steel Manufacturing Simulation and Visualization”, presentation at monthly dinner meeting of Peoria Chapter of ASM, Peoria, IL, February 11, 2019 14. “Steel Manufacturing Simulation and Visualization Consortium”, presentation at AIST Rolling and Casting Technology Committees Meeting, Hammond, IN, September 26, 2018. 15. “Simulation and Visualization for Steel Manufacturing”, seminar at AK Steel Research and Innovation Center, West Chester, OH, July 20, 2018. 16. “Integration of Simulation and Visualization for Industrial Applications”, seminar at 3M, St. Paul, MN, July 12, 2018. 17. “CFD Analysis of an Insertion Magmeter”, presentation at Michigan City & La Porte Chambers Manufacturers’ Association Dinner, Dwyer Instruments, IN, July 10, 2018. 18. “Industrial Process Simulation and Visualization”, seminar at Praxair R&D Center, Tonawanda, NY, June 21, 2018. 19. “Engineering Education and Qualifying the Industry 4.0 Workforce”, panelist at the Future Steel Forum in Warsaw, Poland, June 6-7, 2018 20. “Simulation, Visualization, and Data Analytics for Smart Steel Manufacturing”, presentation at the
Chenn Q. Zhou Page 25 Future Steel Forum in Warsaw, Poland, June 6-7, 2018. 21. “Simulation and Visualization for Metallurgical Processes”, lecture at Northeast University, China, May 2018. 22. “Blast Furnace Modeling and Visualization,” lecture at 25th Intensive Course on Blast Furnace Ironmaking, McMaster University, Hamilton, ON, CA, May 17, 2018. 23. “Center for Innovation through Visualization and Simulation”, presentation at Northwest Indiana One Region meeting, Hammond, IN, April 6, 2018. 24. “CIVS and ArcelorMittal Partnerships on CFD Research”, presentation at 4th ArcelorMittal CFD and Thermomechanics Days, Feb., 2018 25. “Life Prediction in Industrial Equipment”, presentation at the 2nd AIST-IAS Simposio de Grúas/Crane Symposium in Rosario, Argentina, October 22-25, 2017. 26. “Safety Training 3D Interactive Virtual Safety Training Simulator,” presentation at the 2nd AIST-IAS Simposio de Grúas/Crane Symposium, in Rosario, Argentina, October 22-25, 2017. 27. “Steel Manufacturing Simulation and Visualization Consortium”, presentation at AIST Computer Technology Committee Meeting, Hammond, IN, October 26, 2017. 28. “Shaping the Future of Manufacturing with Simulation and Visualization”, presentation at the Dawn and Doom’17, Purdue University West Lafayette, September 27, 2017. 29. “Investigation of Varying Injection Parameters on the Combustion Efficiency of a Blast Furnace,” Keynote at SteelSim2017 conference, Qingdao, China, Aug 16-18, 2017. 30. “Investigation of Coherent Jet Penetration into Steel Bath in an Electric Arc Furnace,” keynote at SteelSim2017 conference, Qingdao, China, Aug 16-18, 2017. 31. “Blast Furnace CFD Simulation and VR Visualization”, panelist at 2017 HPC4Mfg Industry Engagement Day: Spurring Innovation in U.S. Manufacturing Through Advanced Computing, San Diego, CA, March 3, 2017. 32. “Integration of Simulation and Visualization for Mechanical Engineering,” seminar at Guizhou University, China, January 5, 2017. 33. “Integration of Simulation and Visualization for Energy Engineering,” seminar at Central SOunth University, China, December 28, 2016. 34. “CFD Simulation and Visualization for Ironmaking,” keynote at Sintering and Ironmaking Summit, CSU, China, November 26, 2016. 35. “Opportunities for Increased Understanding of the use Metallics in Blast Furnace Ironmaking through Simulation and Visualization Modeling”, presentation at AIST Ironmaking Technology Committee meeting, Hammond, IN,Sept 7, 2016 36. “Virtual Simulators for Safety Training”, presentation at Steel Dynamics Safety Summit, Aug., 2016. 37. “Integration of Simulation and Visualization for Advanced Manufacturing,” presentation at DOE Site visit to Smart Manufacturing Institute, East Hartford, CT, August 16, 2016. 38. “Innovation in Industrial Design and Engineering,” presentation at the NIPSCO Executive Energy Summit, Chesterton, IN, August 4, 2016. 39. “Integration of Computational Simulation and Visualization”, seminar at Livermore National Lab, Aug. 2, 2016 40. “Numerical Simulation of Pulverized Coal and Natural Gas Co-injection in Blast Furnace,” presentation, SCANMET V 2016. Lulea, Sweden, June 12-15, 2016. 41. “Integration of Simulation and Visualization for Advanced Manufacturing,” panelist at the session of Critical Materials/Advanced Manufacturing, Regional Clean Energy Innovation Forum, Purdue University, West Lafayette, IN, June 8-10, 2016. 42. “Blast Furnace Modeling and Visualization,” lecture at 24th Intensive Course on Blast Furnace Ironmaking, McMaster University, Hamilton, ON, CA, May 9, 2016. 43. “Integration of Simulation and Visualization for Process Optimization and Training,” seminar at California Institute for Telecommunications and Information Technology, University of Irvine, Irvine, CA, May 6, 2016. 44. “Steel Manufacturing Simulation and Visualization Consortium,” panelist at the Monthly Lunch Meeting of Lakeshore Chamber of Commerce, Hammond, April 28, 2016. 45. “Integration of Simulation and Visualization for Virtual Engineering and Education,” panelist at the session of Revolution in Modeling and Simulation in Engineering, 2016 convocation of the National
Chenn Q. Zhou Page 26 Engineering Academy and the American Association of Engineering Societies, DC, April 18, 2016. 46. “Steel Manufacturing Simulation and Visualization Consortium,” presentation at AIST Midwest Chapter Monthly Dinner Meeting, Merrillville, IN, April 12, 2016. 47. “Integration of Simulation and Visualization for Manufacturing,” panelist at the Experts in the Field, SMLC Visualization Workshop, Pittsburgh, PA, March 9, 2016. 48. “Integration of Simulation and Visualization for Manufacturing,” SMLC Webinar presentation – Part 2, February 19, 2016. 49. “Overview of CIVS/SMSVC CFD Projects,” presentation at 4th ArcelorMittal CFD and Thermomechanics Days, February 10, 2016. 50. “Integration of Simulation and Visualization,” seminar at Nanjing University of Aeronautics and Astronautics, January 8, 2016. 51. “Simulation and Visualization for Industrial Processes,” seminar at Central South University, China, December 29, 2015. 52. “Advanced Computer Simulation and Visualization for Industry Training,” keynote at 11th International Conference on Modern Industrial Training, Beijing, China, Oct 23-28, 2015. 53. “Simulation and Visualization of Large Industrial Equipment,” keynote at Bao-steel BAC 2015, Shanghai, China, Oct 21-23, 2015. 54. “Numerical Simulation and Visualization of Blast Furnaces,” keynote at Bao-steel BAC 2015, Shanghai, China, Oct 21-23, 2015. 55. “Process Troubleshooting and Optimization Using Computational Simulation and 3-D Visualization,” keynote at AIST-IAS Maintenance, Lubrication, Hydraulics and Forensic Engineering Seminar, Rosario, Argentina, October 2015. 56. “CIVS and SMSVC,” presentation to the World Steel Annual Conference visitors, Oct 13, 2015 57. “Advanced Manufacturing Technologies,” panelist at the Northwest Indiana Manufacturing Summit, Oct 2, 2015. 58. “Workshop on Advanced Steel Technologies - Emerging Global Technologies and R&D Opportunities,” hosted by the DOE/EERE Advanced Manufacturing Office (by invitation only), June 22, 2015. 59. “Simulation and Visualization Applications,” seminar at Chungnam National University, Chonbuk National University, Korea, June 2-3, 2015. 60. “Integration of Numerical Simulation with Virtual Reality Visualization,” Graduate Colloquium Seminar, Department of Mechanical Engineering, Northern Illinois University, DeKalb, IL, April 2015. 61. “Integration of Numerical Simulation with Virtual Reality Visualization,” seminar at Huazhong University of Technology, Wuhan, China, March 2015. 62. “Innovation through the Integration of Simulation and Visualization,” seminar at Anhui University of Technology, Maanshan, China, March 2015. 63. “Applications of Simulation and Visualization in Combustion,” seminar at Anhui University of Technology, Maanshan, China, March 2015. 64. “Integration of Numerical Simulation with Virtual Reality Visualization,” seminar at CETYS, Mexicali, Mexico, February 2015. 65. “Blast Furnace Modeling and Visualization,” presentation at Eastern State Blast Furnace and Coke Oven Winter Annual Meeting, February 6th, 2015. 66. “University Role in the Regional Development,” panelist at Alliance for Regional Development - Summit on Regional Competitiveness, Chicago, December 19, 2014. 67. “Advanced Simulation and Visualization for Steel Optimization Technology Roadmap Workshop II,” presenter, December 2, 2014, Pittsburgh, PA. 68. “Integration of Simulation and Visualization for Research and Education,” keynote at Chinese Heat Transfer Annual Conference, Xian, China, November 2014. 69. “Virtual Engineering,” seminar at Beijing Institute of Technology, Beijing, China, November 2014. 70. “Integration of Simulation and Visualization for Engineering Research and Education,” seminar at College of Mechanical Engineering, China University of Mining and Technology, Xuzhou, Jiangshu, November, 2014. 71. “Integration of Simulation and Visualization for Thermal Engineering Research and Education,” seminar at College of Thermal Energy Engineering, Central South University, China, November, 2014 72. “Advanced Simulation and Visualization for Steel Optimization Technology Roadmap Workshop I,”
Chenn Q. Zhou Page 27 presenter, October 14, 2014, Pittsburgh, PA. 73. “Blast Furnace Modeling and Visualization,” lecture at 23rd Intensive Course on Blast Furnace Ironmaking, McMaster University, Hamilton, ON, CA, May 15, 2014. 74. “Integration of Computer Simulation with Virtual Reality Visualization,” seminar at Buffalo State University, May, 2014. 75. “Process Optimization and Cost Savings for U.S. Steel Provided by the Center for Innovation through Visualization and Simulation,” keynote at AIST Midwest Chapter Meeting, Merrillville, IN, April 8, 2014. 76. “2024 Technologies for an Innovative Northwest Indiana”, panelist at 2014 Northwest Indiana Leader Luncheon, Hammond, IN, April 3, 2014. 77. “Integration of CFD Simulations with Visualization,” seminar at AHUT, March 2014. 78. “Integration of CFD Simulations with Visualization,” seminar at CSU, March 2014. 79. “Computational Fluid Dynamics (CFD) Based Virtual Design and Training,” presentation at 3rd ArcelorMittal CFD and Thermomechanics Days, February 6, 2014. 80. “Innovation through Visualization and Simulation,” seminar at CETYS, Mexicali, Mexico, Nov., 2013. 81. “Visualizing the Future in Manufacturing,” keynote at American Manufacturing Strategies Summit 2013, Chicago, IL, October 22, 2013. 82. “Simulation and Visualization in Steel Industry,” seminar at Hualin Steel, China, September, 2013. 83. “Simulation and Visualization in Engineering,” lecture at Central South University, China, Sept. 2013. 84. “Integration of Simulation and Visualization for Process/Product Design and Optimization”, seminar at 3M Company, MN, July 2013. 85. “Application of Simulation and Visualization Technologies in Steel Manufacturing,” keynote at Baosteel BAC 2013, Shanghai, China, June 6, 2013. 86. “Integration of Simulation and Visualization”, presentation at ASM Calumet Chapter Monthly Dinner Meeting, March 2013. 87. “Integration of Computer Simulation and Virtual Reality Visualization,” seminar at Center for Research Computing, University of Notre Dame, November 28, 2012. 88. “Innovation through Visualization and Simulation,” lecture at School of Energy Engineering, Central South University, China, October 26, 2012. 89. “Integration of Computer Simulation and Virtual Reality Visualization,” seminar at Department of Mechanical Engineering, Iowa State University, Invited Seminar, Center for Research Computing, University of Notre Dame, September 18, 2012. 90. “Computational Fluid Dynamics Simulation and Virtual Reality Visualization,” seminar at Department of Mechanical Engineering, IUPUI, September 6, 2012. 91. “Simulation and Visualization: Keys to Process Optimization,” keynote at 67th Congress of ABM International Congress, organized by the Brazilian Association of Metallurgical, Materials and Mining, July 31- August 3, 2012 92. “Practical Approaches and Applications of Computational Fluid Dynamics,” one-day short course, 67th Congress of ABM International Congress, organized by the Brazilian Association of Metallurgical, Materials and Mining, July 31, 2012. 93. “Simulation and Visualization,” lecture, School of Information Engineering, Taiyuan University of Technology, Shangxi, China, May 2012. 94. “How to Get Grants,” presentation, Purdue University Calumet, April 13, 2012. 95. “Visualize the Future–In 3D,” presentation at Indiana Lakeshore Chamber of Commerce Luncheon, April 26, 2012. 96. “Visualize the Future in Steelmaking,” presentation at Celebrating American Culture – Forged in Steel, Purdue University Calumet, April 21, 2012. 97. “Integration of Simulation and Visualization for Product/Process Design and Optimization,” seminar at Caterpillar, Peoria, March 23, 2012. 98. “CFD Simulation and Virtual Reality Visualization” lecture at Guangdong University of Technology, China, May 2012. 99. “American Higher Education” lecture at Guangdong University of Technology, China, May 2012 100. “Faculty Leadership,” presentation at Faculty Leadership Academy, Purdue Calumet, March 30, 2012. 101. “Center for Innovation through Visualization and Simulation (CIVS),” presentation at the Monthly
Chenn Q. Zhou Page 28 Meeting of IEEE Calumet Section, March 7th, 2012. 102. “Innovation through Visualization and Simulation,” Invited Presentation at the Installation Calumet Chapter of Sigma Xi: The Scientific Research Society, February 22, 2012. 103. “Modelling of Boilers at Burns Harbour Power Station,” invited presentation, 2nd Annual ArcelorMittal CFD and Thermomechanics Days 2012, Jan 31 – Feb 2, 2012 (Global Web Conference). 104. “Development of sinter cooler model,” invited presentation, 2nd Annual ArcelorMittal CFD and Thermomechanics Days 2012, Jan 31 – Feb 2, 2012 (Global Web Conference). 105. “3D CFD Blast Furnace Model,” invited presentation, 2nd Annual ArcelorMittal CFD and Thermomechanics Days 2012, Jan 31 – Feb 2, 2012 (Global Web Conference). 106. “3D for Optimization and Training in Industry,” invited presentation at 3D Stereo MEDIA 2011, professional Forum, Liège, Belgium, December 2011. 107. “CFD Simulation and Virtual Reality Visualization” invited lectures, Beijing University of Science and Technology, December 2011. 108. “Computational Fluid Dynamics Simulation and Virtual Reality Visualization,” Invited presentation, Dongying Fangyuan Nonferrous Metals Co. Ltd., China, September 2011. 109. “Virtual Reality Visualization of a Blast Furnace,” AIST Midwest Member Chapter Dinner Meeting, Merryville, Indiana, March 9, 2010. 110. “Virtual Engineering,” Invited Lecture, School of Energy Science and Engineering, Central South University, May, 2009. 111. “CFD Simulation and Virtual Reality Visualization for Process Design and Optimization, invited presentation in a monthly dinner meeting of ASME Chicago Section, October 2008. 112. “Multiphase Reacting Flows - Part I Modeling and Part II Applications,” presentation at international workshops at Xian Jiaotong University as part of the prestige “111 Scholarly Master Plan,” China, July 2007 and May 2008. 113. “Applications of Computational Fluid Dynamics in Blast Furnaces,” presentation at the 2007 Chinese Society for Metals Annual Meeting, Chengdu, China, November 2007. 114. “Multiphase Reacting Flow Simulations,” seminar at Nanjing University of Aeronautics and Astronautics, China, June 2007 and May 2008. 115. “Engineering Your Future in Steel Industry,” panelist at the “The Future of Metal Industries,” organized by AWMI, April 2007. 116. “CFD Applications in the Steel Industry: A Mittal Steel – Purdue University Calumet Liaison,” presentation at MITTAL STEEL USA Research & Development Seminar Series, July 2006. 117. “Industrial Applications of Computational Fluid Dynamics,” seminar at Central South University, China, April 2006. 118. “Engineering Your Future,” panelist at the Annual Science Careers in Search of Women (SCSW) Conference, Argonne National Laboratory, 2006, 2007, 2008, 2009, 2010, 2012. 119. “Multiphase Modeling of Glass Furnace,” seminar at PPG Corporation, Pittsburgh, January 2006 120. “Industrial Applications of Computational Fluid Dynamics,” invited seminar at School of Power Engineering, Nanjing University of Aerospace and Astronautics, China, July 2005. 121. “CFD Simulation of Blast Furnace Hearth: An Effective Technology for Process Optimization,” presentation at ASM International Calumet Chapter, November 2004. 122. “3-D Stereo of Fluid Dynamics in a Blast Furnace Hearth,” presentation at Purdue Showcase Booth in Super Computing in Pittsburgh, November 2004. 123. “Multiphase Flow Simulations,” presentations at Center South University, Changsha, and Nanjing University of Aerospace and Aeronautics, Nanjing, China, August 2004. 124. “NOx and SOx Emissions and Control,” presentation at Hunan University, Hunan, China, August 2004. 125. “Industrial Applications of CFD Technology,” seminar at Hadady Corporation, March 2004. 126. “CFD Simulations of Aero Engine Combustors,” post presentation at the Exhibition of Flight 100: From the Glider to the Shuttle, Celebration of NWI Series at the NWI Welcome Center, October – Nov., 2003. 127. “Blast Furnace Hearth Simulation: A New Tool to Help Maximize Campaign Life,” poster presentation at the Exhibition of Steel Industry: The past, Present, and Future, Celebration of Northwest Indiana Series at the Northwest Indiana Welcome Center, May to July 2003. 128. “Evaluation of Erosion Patterns in a Blast Furnace Hearth Using a Computational Fluid Dynamics (CFD) Model,” poster presentation in the Governor’s Energize Indiana News Conference, March 2003.
Chenn Q. Zhou Page 29 129. “Re-Tooling the Region through advanced technology Partnerships,” presentation at Northwest Indiana World Trade Council Annual Meeting, September 2003. 130. “GFM- a CFD code for Glass Furnace Modeling,” workshop (with collaborators at Argonne National Lab) for the glass industry organized by DOE, Columbus, OH, October 2002. 131. “Development of Multiphase Reacting Flow Glass Melter Models,” presentation at the 2002 semi-annual meeting of the Multiphase Fluid Dynamics Research Consortium, West Lafayette, IN., April 2002. 132. “Creating Economic Value through Computational Fluid Dynamics Technology Partnerships,” presentation at the 2002 Indiana Technology Conference, March 2003. 133. “CFD Modeling of FCC Riser Reactors,” presentation at the 2001 UOP Technical Conference, Argonne, October 2001. 134. “Multiphase Reacting Flow CFD Modeling and Applications,” seminar at the Center South University, Changsha, Hunan Province, China, July 2001. 135. “Development of a Multiphase Reacting Flow CFD code,” presentation at the 2001 semi-annual meeting of the Multiphase Fluid Dynamics Research Consortium, Salt Lake City, Utah, August 2001. 136. “Modeling of FCC Riser Reactors and Glass Furnaces,” poster presentation at the Utah 2001 Industry Showcase, Salt Lake City, Utah, August 2001. 137. “CFD Applications in Steel Industry,” presentation at the Steel Workshop organized and funded by the Department of Energy, Pittsburgh, PA, October 2000. 138. “GasTurbnLab” graduate student seminar at Department of Mechanical Engineering, Michigan State University, East Lansing, October 2000. 139. “Applicability of Computer Modeling in Iron and Steel-Making Industry,” seminar at Inland steel Inc., process division, March 1998. 140. “Computer Simulation of Multiphase Reacting Flows,” Computational Science & Engineering seminary series, Purdue University, West Lafayette, April 1998. 141. "FCC Riser Flow Modeling,” presentation at one-day workshop for Chevron and UOP, Chicago, IL, Dec., 1998, 1999, and 2000. 142. “Application of Computational Fluid Dynamics - Numerical Simulation of Multiphase Reacting Flows in an FCC Riser,” seminar at Physics department, PUC, April 1997. 143. “Reduction of NOx from Combustion,” seminar at the Energy Technology/Chemical Technology Division, Argonne National Lab, November 1994. 144. “Plasma Assisted NOx Reduction,” seminar at the Center for Transportation Research, Energy System Division, Argonne National Lab, November 1994.
Chenn Q. Zhou Page 30