Ure Proven Flow Measurement Solutions for the Oil and Gas Industry

Advanced Differential Pressure

minimal straight Flow meter Technology pipe requirements McCrometer’s innovative V-Cone flow meter is designed • for high performance in mild to harsh environments. high accuracy and repeatability Pipe flow profiles are rarely This proven flow meter measures the widest range of ideal. Practically any change As the flow approaches the • to the piping can disturb the cone, the flow profile “flattens” Proven Flow flow. The contoured shape of toward the shape of a well the centrally located cone fluids from liquids to gases, including wet gas, low headloss developed profile—even in the V-Cone flow meter in extreme flow conditions. overcomes this by reshaping Measurement condensate, and dirty or abrasive flows, as well as • the velocity profile. easy installation Solutions for the other typical flow measurement conditions. The – ideal retrofit! • Oil and Gas Industry V-Cone flow meter offers easy installation, superior conditions The V-Cone flow meter’s The cone forms very short contour-shaped cone directs the vortices as the flow passes accuracy and repeatability, and long-term, low-cost disturbed flows flow towards the outside wall the cone. These short vortices away from the cone. As a result, create a low amplitude, high the beta edge is not subject to • frequency signal for excellent operation for refinery and onshore/offshore production wear by particle laden fluids signal stability. The clean signal and remains unchanged. measures dirty and enables a wide measurement Therefore, V-Cone flow meters range and quick response time and delivery applications. rarely, if ever, require abrasive flows for control. recalibration or replacement. • virtually no maintenance

• or over two decades, the oil and gas industry has Whether your application is straight-forward or turned to the V-Cone flow meter for flow measurement challenged by limited installation space, disturbed flow, high no recalibration solutions. Consistently, this advanced flow meter has turndowns, wet gas, or dirty or abrasive fluids, McCrometer’s provided a level of performance thought unachievable in real- knowledgeable staff can accurately evaluate your application • F world environments. and specify the best meter to meet your needs. unprecedented long life

www.mccrometer.com 3255 West Stetson Avenue, Hemet, California 92545 USA Phone 800-220-2279 | 951-652-6811 | FAX 951-652-3078 ©-2010-2012 McCrometer, Inc. Printed in U.S.A. Lit. No. 24519-15 Rev 1.8/10-12 May be covered by one or more patents, including U.S. Patents 5,363,699 and 5,814,738 and counterparts outside the U.S. for foreign patents pending. V-Cone ® and Wafer-Cone ® are registered trademarks of McCrometer, Inc. So Innovative. . . V-Cone flow meter Specifications It Created An Entirely New Category Standard Accuracy: ± 0.5% of rate (certain fluids and Reynolds number applications may require specific calibrations to achieve this value) Repeatability: ± 0.1% or better After more than twenty years, McCrometer’s V-Cone flow meter Flow Ranges: remains the most innovative dP meter available today. The self- 10:1 and greater Standard Beta Ratios: he V-Cone® flow meter is an This installation flexibility saves Ideal for Wet Gas and Steam conditioning cone is a simple, yet powerful way to provide 0.45 through 0.85, custom betas advanced technology that takes cost, space and minimizes weight penalty The V-Cone flow meter’s ability to accuracy you can count on regardless of flow dynamics. This results differential pressure flow problems without compromising the available measure wet gas, steam, or condensate is in maximum installation flexibility and unsurpassed performance. measurement to a new level. The V-Cone accuracy of the measurements. Future Head Loss: T unique in the industry. In side-by-side Varies with beta ratio and dP flow meter has proven its performance in changes to upstream or downstream tests with other dP technologies, only the Installation Piping Requirements: the oil and gas industry in some of the piping configurations will not affect the V-Cone flow meter provided accurate Typically 0-3 diameters upstream and harshest operating conditions and for performance of the V-Cone flow meter. measurement of these challenging 0-1 diameter downstream of the cone the widest variety of fluid types. In these Low Total Cost of Ownership Design Flexibility are required, depending on fittings or applications, the V-Cone flow meter Wide Range of Flows and Fluids flow regimes. With no moving parts to replace or The V-Cone flow meter is available consistently outperforms traditional dP The V-Cone flow meter handles most maintain, the V-Cone flow meter assures in line sizes from 0.5” to greater than 120” valves in the adjacent pipeline devices and other major flow technologies. Superior Performance in an extensive variety of construction Materials of Construction Include: every flow condition because it acts as its long-term performance without the S304, S316, Duplex 2205 and 2507, own flow conditioner. This not only allows The V-Cone flow meter delivers an operating costs of other flow meters. The materials with beta ratios to suit any Low Installed Cost maximum installation flexibility, but accuracy to ±0.5% of rate and ±0.1% contoured aerodynamic shape of the cone application. The V-Cone flow meter Carbon steels, Hastelloy C276, 6Mo, other Because it does not require long accurate measurement of disturbed or repeatability (depending on fluid type) profiles the flow in the pipe without can be jacketed, painted, coated, or materials are available on request swirling flows. In addition, the V-Cone flow under a variety of conditions. It also impacting it against a sharp beta edge. treated like any other piece of piping. Line Sizes: straight pipe runs or flow conditioning 0.5” to 120” or larger devices, the V-Cone flow meter can fit into meter is designed to withstand abrasive, handles turndowns of 10:1 and greater, Instead, a boundary layer forms along the The V-Cone flow meter is regularly End Fittings: tight spaces. When retrofitting existing dirty and particle-laden flows without without loss of accuracy. The V-Cone flow cone , directing fluid away from the beta calibrated, tested and certified to the Flanged, threaded, hub or weld-end applications, the V-Cone flow meter significant wear. meter has an unprecedented long life of edge. The V-Cone flow meter’s beta edge most demanding specifications. standard - Others on request typically fits right in place without having twenty-five years or more. does not change dimensionally, thus Configurations: to re-engineer the piping layout. allowing extremely long usage without Precision flow tube and wafer-type physical re-calibration. • Calibrated for customer application Meeting the Needs of the Oil & Gas Industry • ASME B31.3 standard • ASME B31.1, B31.4, B31.8, Sec. VIII, Applications Fluid Types API 6A, and other standards available Allocation Measurement Natural Gas / Crude Oil / Water / Air / Steam on request Approvals for the V-Cone Flow Meter: Blending Liquid Hydrocarbons / Chemicals • GOST-R approval Burners Natural Gas / LPG / LNG • Canadian custody transfer approved Chimney Stack Flue Gas The Wafer-Cone® flow meter The Wafer-Cone flow meter is the ideal low cost solution, • In-Metro approved Coal Bed Methane / Shale Gas Dirty / Wet Natural Gas is available in line sizes from offering exceptional 1 to 6 inches and can be oil • Meters in compliance with Compressors (Inlet / Outlet, Loop / Anti-Surge Control) Natural Gas flexibility for natural gas, or gas flow calibrated. PED97/23/EC are available coal bed methane, and shale Custody Transfer Natural Gas / Crude Oil / Water / Air / Steam Featuring a removable cone upon request Feed Lines to Flare Natural Gas gas wellheads. Also ideal for and flangeless design, cones small process lines, and • ISO 9001:2008 certified quality Firewater Pumps Testing Water / Seawater with different beta ratios many other plant can be easily exchanged to management system Fuel gas Natural Gas / LPG / LNG infrastructure applications. accommodate changing Performance Verification Testing: Gas Lift Natural Gas flow conditions without the Tested at an API Registered MPMS Test Injections / Reinjections Natural Gas / Water / Steam / CO 2 (Gas & Liquid) / Chemical need for recalibration. Facility according to the requirements of Oil Sands Steam / Natural Gas / Crude Oil API MPMS Chapter 22.2 Produced Liquids Liquid Hydrocarbons / Condensate / Water Production and Test Separators (Inlet / Outlet) Natural Gas / Wet Natural Gas / Crude Oil / Water Lift Pumps Water / Seawater Steam Saturated / Super Saturated / Super Heated To place an order or learn more about the V-Cone flow meter, contact our experts at 951-652-6811 or visit our website at www.mccrometer.com Wellhead Measurement Natural Gas / Wet Natural Gas / Crude Oil / Water Wet Gas (with Known Liquid Volume) Wet Natural Gas So Innovative. . . V-Cone flow meter Specifications It Created An Entirely New Category Standard Accuracy: ± 0.5% of rate (certain fluids and Reynolds number applications may require specific calibrations to achieve this value) Repeatability: ± 0.1% or better After more than twenty years, McCrometer’s V-Cone flow meter Flow Ranges: remains the most innovative dP meter available today. The self- 10:1 and greater Standard Beta Ratios: he V-Cone® flow meter is an This installation flexibility saves Ideal for Wet Gas and Steam conditioning cone is a simple, yet powerful way to provide 0.45 through 0.85, custom betas advanced technology that takes cost, space and minimizes weight penalty The V-Cone flow meter’s ability to accuracy you can count on regardless of flow dynamics. This results differential pressure flow problems without compromising the available measure wet gas, steam, or condensate is in maximum installation flexibility and unsurpassed performance. measurement to a new level. The V-Cone accuracy of the measurements. Future Head Loss: T unique in the industry. In side-by-side Varies with beta ratio and dP flow meter has proven its performance in changes to upstream or downstream tests with other dP technologies, only the Installation Piping Requirements: the oil and gas industry in some of the piping configurations will not affect the V-Cone flow meter provided accurate Typically 0-3 diameters upstream and harshest operating conditions and for performance of the V-Cone flow meter. measurement of these challenging 0-1 diameter downstream of the cone the widest variety of fluid types. In these Low Total Cost of Ownership Design Flexibility are required, depending on fittings or applications, the V-Cone flow meter Wide Range of Flows and Fluids flow regimes. With no moving parts to replace or The V-Cone flow meter is available consistently outperforms traditional dP The V-Cone flow meter handles most maintain, the V-Cone flow meter assures in line sizes from 0.5” to greater than 120” valves in the adjacent pipeline devices and other major flow technologies. Superior Performance in an extensive variety of construction Materials of Construction Include: every flow condition because it acts as its long-term performance without the S304, S316, Duplex 2205 and 2507, own flow conditioner. This not only allows The V-Cone flow meter delivers an operating costs of other flow meters. The materials with beta ratios to suit any Low Installed Cost maximum installation flexibility, but accuracy to ±0.5% of rate and ±0.1% contoured aerodynamic shape of the cone application. The V-Cone flow meter Carbon steels, Hastelloy C276, 6Mo, other Because it does not require long accurate measurement of disturbed or repeatability (depending on fluid type) profiles the flow in the pipe without can be jacketed, painted, coated, or materials are available on request swirling flows. In addition, the V-Cone flow under a variety of conditions. It also impacting it against a sharp beta edge. treated like any other piece of piping. Line Sizes: straight pipe runs or flow conditioning 0.5” to 120” or larger devices, the V-Cone flow meter can fit into meter is designed to withstand abrasive, handles turndowns of 10:1 and greater, Instead, a boundary layer forms along the The V-Cone flow meter is regularly End Fittings: tight spaces. When retrofitting existing dirty and particle-laden flows without without loss of accuracy. The V-Cone flow cone , directing fluid away from the beta calibrated, tested and certified to the Flanged, threaded, hub or weld-end applications, the V-Cone flow meter significant wear. meter has an unprecedented long life of edge. The V-Cone flow meter’s beta edge most demanding specifications. standard - Others on request typically fits right in place without having twenty-five years or more. does not change dimensionally, thus Configurations: to re-engineer the piping layout. allowing extremely long usage without Precision flow tube and wafer-type physical re-calibration. • Calibrated for customer application Meeting the Needs of the Oil & Gas Industry • ASME B31.3 standard • ASME B31.1, B31.4, B31.8, Sec. VIII, Applications Fluid Types API 6A, and other standards available Allocation Measurement Natural Gas / Crude Oil / Water / Air / Steam on request Approvals for the V-Cone Flow Meter: Blending Liquid Hydrocarbons / Chemicals • GOST-R approval Burners Natural Gas / LPG / LNG • Canadian custody transfer approved Chimney Stack Flue Gas The Wafer-Cone® flow meter The Wafer-Cone flow meter is the ideal low cost solution, • In-Metro approved Coal Bed Methane / Shale Gas Dirty / Wet Natural Gas is available in line sizes from offering exceptional 1 to 6 inches and can be oil • Meters in compliance with Compressors (Inlet / Outlet, Loop / Anti-Surge Control) Natural Gas flexibility for natural gas, or gas flow calibrated. PED97/23/EC are available coal bed methane, and shale Custody Transfer Natural Gas / Crude Oil / Water / Air / Steam Featuring a removable cone upon request Feed Lines to Flare Natural Gas gas wellheads. Also ideal for and flangeless design, cones small process lines, and • ISO 9001:2008 certified quality Firewater Pumps Testing Water / Seawater with different beta ratios many other plant can be easily exchanged to management system Fuel gas Natural Gas / LPG / LNG infrastructure applications. accommodate changing Performance Verification Testing: Gas Lift Natural Gas flow conditions without the Tested at an API Registered MPMS Test Injections / Reinjections Natural Gas / Water / Steam / CO 2 (Gas & Liquid) / Chemical need for recalibration. Facility according to the requirements of Oil Sands Steam / Natural Gas / Crude Oil API MPMS Chapter 22.2 Produced Liquids Liquid Hydrocarbons / Condensate / Water Production and Test Separators (Inlet / Outlet) Natural Gas / Wet Natural Gas / Crude Oil / Water Lift Pumps Water / Seawater Steam Saturated / Super Saturated / Super Heated To place an order or learn more about the V-Cone flow meter, contact our experts at 951-652-6811 or visit our website at www.mccrometer.com Wellhead Measurement Natural Gas / Wet Natural Gas / Crude Oil / Water Wet Gas (with Known Liquid Volume) Wet Natural Gas So Innovative. . . V-Cone flow meter Specifications It Created An Entirely New Category Standard Accuracy: ± 0.5% of rate (certain fluids and Reynolds number applications may require specific calibrations to achieve this value) Repeatability: ± 0.1% or better After more than twenty years, McCrometer’s V-Cone flow meter Flow Ranges: remains the most innovative dP meter available today. The self- 10:1 and greater Standard Beta Ratios: he V-Cone® flow meter is an This installation flexibility saves Ideal for Wet Gas and Steam conditioning cone is a simple, yet powerful way to provide 0.45 through 0.85, custom betas advanced technology that takes cost, space and minimizes weight penalty The V-Cone flow meter’s ability to accuracy you can count on regardless of flow dynamics. This results differential pressure flow problems without compromising the available measure wet gas, steam, or condensate is in maximum installation flexibility and unsurpassed performance. measurement to a new level. The V-Cone accuracy of the measurements. Future Head Loss: T unique in the industry. In side-by-side Varies with beta ratio and dP flow meter has proven its performance in changes to upstream or downstream tests with other dP technologies, only the Installation Piping Requirements: the oil and gas industry in some of the piping configurations will not affect the V-Cone flow meter provided accurate Typically 0-3 diameters upstream and harshest operating conditions and for performance of the V-Cone flow meter. measurement of these challenging 0-1 diameter downstream of the cone the widest variety of fluid types. In these Low Total Cost of Ownership Design Flexibility are required, depending on fittings or applications, the V-Cone flow meter Wide Range of Flows and Fluids flow regimes. With no moving parts to replace or The V-Cone flow meter is available consistently outperforms traditional dP The V-Cone flow meter handles most maintain, the V-Cone flow meter assures in line sizes from 0.5” to greater than 120” valves in the adjacent pipeline devices and other major flow technologies. Superior Performance in an extensive variety of construction Materials of Construction Include: every flow condition because it acts as its long-term performance without the S304, S316, Duplex 2205 and 2507, own flow conditioner. This not only allows The V-Cone flow meter delivers an operating costs of other flow meters. The materials with beta ratios to suit any Low Installed Cost maximum installation flexibility, but accuracy to ±0.5% of rate and ±0.1% contoured aerodynamic shape of the cone application. The V-Cone flow meter Carbon steels, Hastelloy C276, 6Mo, other Because it does not require long accurate measurement of disturbed or repeatability (depending on fluid type) profiles the flow in the pipe without can be jacketed, painted, coated, or materials are available on request swirling flows. In addition, the V-Cone flow under a variety of conditions. It also impacting it against a sharp beta edge. treated like any other piece of piping. Line Sizes: straight pipe runs or flow conditioning 0.5” to 120” or larger devices, the V-Cone flow meter can fit into meter is designed to withstand abrasive, handles turndowns of 10:1 and greater, Instead, a boundary layer forms along the The V-Cone flow meter is regularly End Fittings: tight spaces. When retrofitting existing dirty and particle-laden flows without without loss of accuracy. The V-Cone flow cone , directing fluid away from the beta calibrated, tested and certified to the Flanged, threaded, hub or weld-end applications, the V-Cone flow meter significant wear. meter has an unprecedented long life of edge. The V-Cone flow meter’s beta edge most demanding specifications. standard - Others on request typically fits right in place without having twenty-five years or more. does not change dimensionally, thus Configurations: to re-engineer the piping layout. allowing extremely long usage without Precision flow tube and wafer-type physical re-calibration. • Calibrated for customer application Meeting the Needs of the Oil & Gas Industry • ASME B31.3 standard • ASME B31.1, B31.4, B31.8, Sec. VIII, Applications Fluid Types API 6A, and other standards available Allocation Measurement Natural Gas / Crude Oil / Water / Air / Steam on request Approvals for the V-Cone Flow Meter: Blending Liquid Hydrocarbons / Chemicals • GOST-R approval Burners Natural Gas / LPG / LNG • Canadian custody transfer approved Chimney Stack Flue Gas The Wafer-Cone® flow meter The Wafer-Cone flow meter is the ideal low cost solution, • In-Metro approved Coal Bed Methane / Shale Gas Dirty / Wet Natural Gas is available in line sizes from offering exceptional 1 to 6 inches and can be oil • Meters in compliance with Compressors (Inlet / Outlet, Loop / Anti-Surge Control) Natural Gas flexibility for natural gas, or gas flow calibrated. PED97/23/EC are available coal bed methane, and shale Custody Transfer Natural Gas / Crude Oil / Water / Air / Steam Featuring a removable cone upon request Feed Lines to Flare Natural Gas gas wellheads. Also ideal for and flangeless design, cones small process lines, and • ISO 9001:2008 certified quality Firewater Pumps Testing Water / Seawater with different beta ratios many other plant can be easily exchanged to management system Fuel gas Natural Gas / LPG / LNG infrastructure applications. accommodate changing Performance Verification Testing: Gas Lift Natural Gas flow conditions without the Tested at an API Registered MPMS Test Injections / Reinjections Natural Gas / Water / Steam / CO 2 (Gas & Liquid) / Chemical need for recalibration. Facility according to the requirements of Oil Sands Steam / Natural Gas / Crude Oil API MPMS Chapter 22.2 Produced Liquids Liquid Hydrocarbons / Condensate / Water Production and Test Separators (Inlet / Outlet) Natural Gas / Wet Natural Gas / Crude Oil / Water Lift Pumps Water / Seawater Steam Saturated / Super Saturated / Super Heated To place an order or learn more about the V-Cone flow meter, contact our experts at 951-652-6811 or visit our website at www.mccrometer.com Wellhead Measurement Natural Gas / Wet Natural Gas / Crude Oil / Water Wet Gas (with Known Liquid Volume) Wet Natural Gas Advanced Differential Pressure