DOCSLIB.ORG

337-Piece Apprentice Starter Set We Have Used Our Years of Experience in the Tool Business to Develop a Tool Set That Includes the Most Popular Hand and Air Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
337-Piece Apprentice Starter Set We Have Used Our Years of Experience in the Tool Business to Develop a Tool Set That Includes the Most Popular Hand and Air Tools QUALITY - INNOVATION - VALUE 337-Piece Apprentice Starter Set We have used our years of experience in the tool business to develop a tool set that includes the most popular hand and air tools. This set includes over 337 of the most common tools used by technicians. All in a great looking 5 drawer cart and designed for the entry level technician. #24964 Includes: PART# DESCRIPTION QTY PART# DESCRIPTION QTY PART# DESCRIPTION QTY PART# DESCRIPTION QTY PART# DESCRIPTION QTY 17515 FUNNEL SET 1 22492 3/8" DR EXT L6" 1 22802 E6 TORX SCKT 1/4" DR 1 22923 1/2" DR 24" BRKR 1 25287 SIDE TERMINAL BATTERY 1 WR 5/16 22011 8MM COMBO WRENCH 1 22494 3/8" DR EXT L10" 1 22803 E7 TORX SCKT 1/4" DR 1 22950 12-PC 1/4" MM SCKT SET 1 25320 FILTER WRENCH CARDED 1 22013 10MM COMBO WRENCH 1 22495 3/8" DR EXT L18" 1 22804 E8 TORX SCKT 3/8" DR 1 22951 12-PC 1/4" MM DP SCKT SET 1 25370 SM SWIVEL WRCH 1 22014 11MM COMBO WRENCH 1 22520 1/4" DR UNIVERSAL JOINT 1 22805 E10 TORX SCKT 3/8" DR 1 22952 10-PC 1/4" SAE SCKT SET 1 2 3/4"-3 1/4" 22015 12MM COMBO WRENCH 1 22521 3/8" DR UNIVERSAL JOINT 1 22806 E11 TORX SCKT 3/8" DR 1 22953 10-PC 1/4" SAE DP SCKT SET 1 25371 LG SWIVEL WRCH 1 22016 13MM COMBO WRENCH 1 22531 1/2"F x 3/8"M ADPTR 1 22807 E12 TORX SCKT 3/8" DR 1 22954 12-PC 3/8" MM SCKT SET 1 3 7/16"-3 3/4" 22017 14MM COMBO WRENCH 1 22532 3/8"F x 1/2"M ADPTR 1 22808 E14 TORX SCKT 3/8" DR 1 22955 12-PC 3/8" MM DP SCKT SET 1 25412 TOYOTA OIL CAP WRENCH 1 64 MM 22018 15MM COMBO WRENCH 1 22533 3/8"F x 1/4"M ADPTR 1 22809 E16 TORX SCKT 3/8" DR 1 22956 11-PC 3/8" SAE SCKT SET 1 25517 3-PC DEAD-BLOW HAMMER 1 22019 16MM COMBO WRENCH 1 22534 1/4"F x 3/8"M ADPTR 1 22820 HX BT SCKT 1/4" DR 2MM 1 22957 11-PC 3/8" SAE DP SCKT SET 1 25587 3/8" DR IMPACT SET 1 22020 17MM COMBO WRENCH 1 22580 #8 STAR DRIVER 1 22821 HX BT SCKT 1/4" DR 2.5MM 1 22970 8-PC SCREWDRIVER SET 1 8-19 MM 12-PC 22021 18MM COMBO WRENCH 1 22581 #9 STAR DRIVER 1 22822 HX BT SCKT 1/4" DR 3MM 1 22971 12-PC TX T8-T55 1/4" & 3/8" 1 25589 3/8" DR IMPACT SET 1 22022 19MM COMBO WRENCH 1 22582 #10 STAR DRIVER 1 22823 HX BT SCKT 1/4" DR 4MM 1 22972 11-PC TP TX T8-T50 1 5/16"-1" 12-PC 1/4" & 3/8" 22030 1/4" COMBO WRENCH 1 22583 #15 STAR DRIVER 1 22830 HX BT SCKT 3/8" DR 5MM 1 25742 WHEEL HUB 1 22981 7-PC HX BIT MM 1 RESURFACING KIT 22031 5/16" COMBO WRENCH 1 22584 #20 STAR DRIVER 1 22831 HX BT SCKT 3/8" DR 6MM 1 22984 11-PC HX BIT SAE 1 25765 3/8" REVERSIBLE 1 22032 3/8" COMBO WRENCH 1 22585 #25 STAR DRIVER 1 22832 HX BT SCKT 3/8" DR 7MM 1 1/4" & 3/8" AIR DRILL 22033 7/16" COMBO WRENCH 1 22586 #27 STAR DRIVER 1 22833 HX BT SCKT 3/8" DR 8MM 1 24224 1/2" DR 9-PC WALL 1 25769 1/2" IMPACT WRENCH 1 22034 1/2" COMBO WRENCH 1 22587 #30 STAR DRIVER 1 22834 HX BT SCKT 3/8" DR 10MM 1 DEEP SCKT SET 25776 AIR HAMMER 1 22035 9/16" COMBO WRENCH 1 22590 POCKET SCREWDRIVER 1 22865 HX BT SCKT 3/8" DR 5/16 1 24461 2AA FLASHLIGHT 1 25819 PRO AIR RATCHET 1 22036 5/8" COMBO WRENCH 1 22610 6" SLIP JOINT 1 22866 HX BT SCKT 3/8" DR 3/8 1 24900 OEM CUSTOM FENDER 1 25864 DUAL HEAD INFLATOR 1 COVER 22037 11/16" COMBO WRENCH 1 22612 6" LONG NOSE PLIERS 1 22870 HX BT SCKT 1/2" DR 7/16 1 25887 CIRCUIT TESTER 1 24922 MAGNETIC PICKUP TOOL 1 W/WIRE PIERCING 22038 3/4" COMBO WRENCH 1 22614 6 1/2" DIAGONAL PLIERS 1 22871 HX BT SCKT 1/2" DR 1/2 1 30-PC 27113 18-PC DISC BRAKE SET 1 22039 13/16" COMBO WRENCH 1 22619 10" GROOVE JOINT PLIERS 1 22872 HX BT SCKT 1/2" DR 9/16 1 24963 SERV CART 1 22040 7/8" COMBO WRENCH 1 22621 11" STRAIGHT NOSE PLIERS 1 22873 HX BT SCKT 1/2" DR 5/8 1 5-DRAWER & 1 TRAY 27194 8-PC PROF BRAKE 1 TOOL SET 22194 10-PC 3/8" DR 1 22624 16" GROOVE JOINT PLIERS 1 22874 HX BT SCKT 1/2" DR 3/4 1 25079 STRAP FILTER WRENCH 1 REPLACEMENT STUD 27196 10-PC FLUTED MET CAP 1 22636 5" CJ LOCKING PLIERS 1 22880 3/8" DR MAGNET SPK PLG 1 25121 BATTERY TERMINAL 1 WRENCH SET 22196 1/2" DR 1 SKT 9/16" PULLER 22637 6 1/2" LN LOCKING PLIERS 1 SOCKET RAIL BLACK 27197 7-PC OIL FILTER CAP 1 22887 3/8" DR MAGNET SPK PLG 1 25122 BATTERY TERMINAL 1 SCKT SET 22638 7" CJ LOCKING PLIERS 1 22198 1/4" DR 1 SKT 5/8" SPREADER 70-938 3/8" DR SOCKET RAIL 1 SOCKET RAIL BLACK 22640 10" CJ LOCKING PLIERS 1 22900 1/4" DR REGULAR RTCHT 1 25127 BATTERY TERMINAL BRUSH 1 CEN12006 BOUNCE LIGHT, 25' CORD 1 22480 1/4" DR EXT L2" 1 22651 6" ADJUSTABLE WRENCH 1 22901 1/4" DR FLEXIBLE RTCHT 1 25193 8 1/4" WIRE STRIPPER/ 1 FOW74225500 DIGITAL TIRE GUAGE 1 22481 1/4" DR EXT L4" 1 22652 8" ADJUSTABLE WRENCH 1 L6" CUT/CRIMP LIS18700 HOT SLEEVE 1 22482 1/4" DR EXT L6" 1 22654 12" ADJUSTABLE WRENCH 1 22911 3/8" DR REGULAR 1 25234 1/2" IMPACT GRADE 1 EXT. 6" & 12" RTCHT L8" MILS921 PASSENGER TIRE GAUGE, 1 22483 1/4" DR EXT L11" 1 22659 15" CHAIN WRENCH 1 22912 3/8" DR FLEXIBLE 1 25266 8-PC MAN BRK GAUGE ST 1 50PSI 22490 3/8" DR EXT L 1-3/4" 1 22800 E4 TORX SCKT 1/4" DR 1 RTCHT 11 1/2" 25283 BATTERY CARRIER 1 SAS5330 NSX TURBO CLEAR LENS 1 22491 3/8" DR EXT L3" 1 22801 E5 TORX SCKT 1/4" DR 1 22913 3/8" DR 11-9/16" BRKR 1 GreatNeck® Saw Manufacturing reserves the right to substitute a like item or an item of greater value if a product is not available. Images shown may not always be the actual product but represent products or sets included with the product. 1040.1223.24964.
Load more

Recommended publications
  • Specialty Tools Brake Tools
    Specialty Tools SPECIALTY TOOLS • Includes sizes T-40, T-45, T-50. • All Torxbits are made of heat-treated alloy steel. 27740 - 3 pc. set includes T-40, T-45, T-50 sizes BRAKE TOOLS for servicing disc brakes fitting GM and Ford brake caliper Torx bolts. • 3-Stone Hone Fits Cylinders to 2" (21.4-50.8mm). • Available Individually: 26620 T-40 3/8" drive, 26630 T-45 3/8" drive, 26640 T-50 3/8" drive • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in Lisle Brake Caliper Torx Bit Set LST 27740 step-cut and blind-end cylinders. 240 grit stones are 1 1/8" long. Flexible driver. • # 10050 Replacement Stones • Hardened alloy steel bits. Lisle Brake Cylinder Hone LST 10000 • Professional sand finish. • Sizes: T40, T45 & T50. Performance Tool 3 Pc Brake Caliper Star Bit Set • 2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm). WIL W1337 • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in step-cut and blind-end cylinders. 240 grit stones are • Hangs the Disc Brake Caliper Out of the Way During Service While 1-1/8" long. Flexible driver. Keeping Tension Off the Brake Line. • # 10550 Replacement Stones • Helps prevent damage to calipers and lines when servicing brakes, Lisle Brake Cylinder Hone LST 10500 suspension, hubs and more. • Overall length of 9" for hanging the disc brake caliper out of the way while keeping tension off the brake line.
    [Show full text]
  • Pliers, Clamping, & Cutting
    PLIERS, CLAMPING, & CUTTING TABLE OF CONTENTS XL SERIES PLIERS . 742-743 LOCK JOINT PLIERS . .744 POWER-TRACK® II PLIERS . .745 ASSORTED PLIERS SETS . .746 NEEDLE-NOSE PLIERS . 747-748 CUTTING PLIERS . 749-752. LINEMAN'S PLIERS . 752-753. SPECIALTY PLIERS. 754 MINIATURE PLIERS . 755. LOCKING PLIERS . 756-762. LOCKING C-CLAMPS . 762-765 SAFETY WIRE TWISTERS. 766 WIRE STRIPPERS & CUTTERS . .767 AUTOMOTIVE PLIERS . 768-769. RETAINING RING PLIERS SETS . 770-772 RETAINING RING PLIERS . 773-774 1000V PLIERS . 775-781. HACKSAW . 782. C-CLAMPS . 782-784 EYE BOLTS . 785. SNIPS . 785-787 . MULTI-PURPOSE TOOLS . .787 KNIVES. 788 PROTO® STAINLESS STEEL ELECTRICIAN'S SCISSORS A handy electrician's tool that can accomplish common tasks like stripping, crimping, cutting, and snipping from thin delicate wires to thicker multi-core cables, conveniently locked on the belt until needed. Ergonomic handles with hole for tethering. Built-in wire stripper can strip and crimp for AWG 12, 14 and 16 cables. Stainless steel construction. Includes a holder with a quick release button and a belt clip. Cuts multi- wire cables and snips tiny wires. Micro anti-slip teeth on blades for better cutting grip. SAFETY WIRE PLIERS Safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration and other forces. The presence of safety wiring also serves to indicate that the fasteners have been properly tightened. Safety wire is available in a variety of gauges and materials, depending on the application. In aircraft and racing applications, stainless steel wire is used, most commonly in .032" diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored to a second fastener or part, then twisted again.
    [Show full text]
  • IRWIN Industrial Tools
    LockingLocking ToolsTools The Professionals Choice Since 1924 The VISE-GRIP® Locking Tool was invented in 1924 by a blacksmith in the small town of DeWitt, Nebraska. Eight decades and more than a half-billion tools later, IRWIN® VISE-GRIP continues to be handcrafted in the U.S.A with the same quality and dependability that trade professionals have trusted and preferred since the beginning. Our expertise in design and manufacturing produces locking tools with more than twice the life and signifi cantly more strength than other tools on the market. And to further meet the needs of professional tool users, IRWIN VISE-GRIP is now available in three handle confi gurations: The Original™, ProTouch™ and Fast Release™. A Perfect Grip for Any Job The Original IRWIN VISE-GRIP Locking Tools provide powerful locking force using the classic triggered design. The Original® Locking Tools 10 pc. Set with Kitbag 10R®, 10WR®, 7R®, 7WR®, 7LW®, 5WR®, 6LN®, 9LN®, 6R®, 11R® #1078KB IRWIN VISE-GRIP ProTouch Locking Tools provide a cushioned handle and rugged grip for all of your toughest jobs. The cushioned grip reduces vibration, hand fatigue and helps prevent slipping - even for greasy, oily hands. www.irwin.com Locking Tools Introducing the new IRWIN® VISE-GRIP® Fast Release™ Locking Tool. It offers the strength and durability of The Original™ with the performance advantage of a release that is 2x easier to open. It unlocks from any angle without needing to press a trigger, making it ideal for professionals who work in tight spaces. The Fast Release locking tool also offers more fi nger room to accommodate large hands and professionals who wear gloves.
    [Show full text]
  • Instructions For
    INSTRUCTIONS FOR: WORKING TERMINOLOGY: Figure 1 REAR HANDLE FRONT MOTOR HANDLE CAUTION! HOUSING SPINDLE LOCK BUTTON SWITCH DUST KEEP CONTROL HANDS AWAY! BLADE HEIGHT EXPOSED WHILE nkSafe ADJUSTMENT CUTTING hi ty THREE-ARM T • W • KNOB n DEPTH e o HEIGHT LOCKING a i GAUGE CRAIN t WING SCREW r c E e ye ot DEPTH GAUGE BLADE Pr ADJUSTMENT REFERENCE DEPTH GAUGE GUARD SCALE LINES THREE-ARM KNOB No. 835 Heavy-Duty Undercut Saw WARNINGS: • IN USE, KEEP ONE HAND ON THE FRONT HANDLE AND ONE HAND ON THE REAR HANDLE. DON’T REMOVE A HAND TO CLEAR DEBRIS. • SWITCH OFF AND UNPLUG SAW BEFORE MAKING ANY ADJUSTMENTS, BLADE CHANGE OR REPAIRS. BLADE MUST BE STOPPED. KICKBACK HAZARDS: • THE SAW PLUNGE-STARTS. PLUNGE SLOWLY BEFORE PUSHING FOR- WARD! • KEEP RPMs HIGH. DON’T FORCE THE SAW, ESPECIALLY WHEN NAILS MAY BE PRESENT. • HEIGHT ADJUSTMENT: KEEP THE BLADE HOUSING FLAT ON LEVEL FLOORS, AND KEEP BLADE PARALLEL TO THE FLOOR AT ALL TIMES. • ALWAYS PUSH THE SAW AGAINST THE BLADE ROTATION. NEVER PULL THE SAW TOWARDS YOURSELF OR CUT IN REVERSE. SAFE OPERATING POSITION: KEEP KNEES AND OTHER BODY PARTS OUT OF KICK BACK ARC. KNEEL TO THE SIDE! DO NOT USE STANDING UP! CUTTING DIRECTION SAFETY FIRST This saw is designed for undercutting affixed wooden door jambs, moldings, base, and masonry, tile and stone walls to fit new flooring underneath. Do not use this saw for sanding floors, cutting metal, or any purpose not described in this manual. HANDLES: In use, keep both hands on the handles at all times.
    [Show full text]
  • Mobile-Shop PM Cart Tool List
    Mobile-Shop PM Cart Tool List Tool # Tool Name Brand Name Location 2 Scissors Mobile-Shop Tool Bag 3 6" Phillips driver bit Mobile-Shop Tool Bag 4 Magnetic pick-up Mobile-Shop Tool Bag 5 Inspection mirror Mobile-Shop Tool Bag 6 Pick tool Mobile-Shop Tool Bag 7 1/2" wood chisel Mobile-Shop Tool Bag 8 Mini pry bar Stanley Tool Bag 9 Mini LED Flashligh (Larry Light) NEBO Tools Tool Bag 10 Power Lock 16' Tape Measure Mobile-Shop Tool Bag 11 SAE hex wrench set Eklind Tool Bag 12 Razor blade scraper Mobile-Shop Tool Bag 13 Tweezers Mobile-Shop Tool Bag 14 3/32" nail set punch Mobile-Shop Tool Bag 15 Electronic temperature probe Mobile-Shop Tool Bag 16 Voltage sensor Mobile-Shop Tool Bag 17 Wire stripper Tekton Tool Bag 18 Diamond sharpening stone Mobile-Shop Tool Bag 19 Quick change utility knife Quickblade Tool Bag 20 Multi-bit mini-screwdriver Great Neck Tool Bag 21 Needle nose pliers Channellock Tool Bag 22 9" needle nose locking pliers Pittsburgh Tool Bag 23 6" adjustable wrench` Mobile-Shop Tool Bag 24 Saw handle General Tools Tool Bag 25 6" round file Stanley Tool Bag 26 8" 4 in1 file Stanley Tool Bag 27 8" groove joint pliers Channellock Tool Bag 28 Lineman’s pliers Channellock Tool Bag 29 1/4" x 4 flat head screwdriver Channellock Tool Bag 30 11 in 1 multi bit-screwdriver Klein Tools Tool Bag 31 Torpedo level Johnson Tool Bag 32 6 in 1 painter's tool Hyde Tool Bag 33 SAE socket set with rack Mobile-Shop Tool Bag 34 3/8" ratchet Stanley Tool Bag 35 Small wire brush Mobile-Shop Tool Bag 36 Tooth brush Mobile-Shop Tool Bag 37 Calculator
    [Show full text]
  • New York City Fire Department
    New York City Fire Department FORCIBLE ENTRY REFERENCE GUIDE TECHNIQUES AND PROCEDURES FDNY FORCIBLE ENTRY REFERENCE GUIDE December, 2006 TECHNIQUES AND PROCEDURES 2 FDNY FORCIBLE ENTRY REFERENCE GUIDE December, 2006 TECHNIQUES AND PROCEDURES FORCIBLE ENTRY REFERENCE GUIDE TECHNIQUES AND PROCEDURES 3 FDNY FORCIBLE ENTRY REFERENCE GUIDE December, 2006 TECHNIQUES AND PROCEDURES DEDICATION The effort to complete this manual is dedicated to the sons of Captain John Vigiano, Firefighter John T. Vigiano II (Ladder Company 132) and Detective 2nd Grade Joseph V. Vigiano (NYPD- Emergency Services Truck 2) and all of the first responders who gave their lives on September 11, 2001 The first responders that fateful day, were true professionals who knew the risks and dangers that awaited them in those buildings. They never wavered or deviated from their assignments when they entered the towers. They provide inspiration to us as family members and as members of the FDNY. It is our hope that this manual will benefit other young professionals in their careers as firefighters. 4 FDNY FORCIBLE ENTRY REFERENCE GUIDE December, 2006 TECHNIQUES AND PROCEDURES INTRODUCTION The objective of this manual is to provide the reader a comprehensive study of forcible entry. Although it cannot cover every aspect or technique of this demanding skill, it does cover those techniques that have proven to be successful for members of the FDNY. The skill of forcible entry has been part of the fire service since its inception. The ingenuity and foresight of many talented people developed these techniques, which were then handed down through the generations of firefighters by “on-the-job training.” It is our privilege to honor these people for providing the motivation and drive to put this material together.
    [Show full text]
  • 11 12 Tools Sets
    WWW.ENDURATOOLS.COM WWW.ENDURATOOLS.COM 75PC.MACHINE REPAIR SET 48PC.AUTO REPAIR TOOL SET 49PC.TELE-COMMUNICATION TOOL SET 13PC.AUTO REPAIR TOOL SET 50PC.TELE-COMMUNICATION TOOL SET 3 1－Plastic-coated Handled Adjustable Wrench 8" 7－Comb. Wrench 11,12,13,14,15,17,19mm 1-Heavy Duty Adjustable Wrench 6" 12－1/4" Dr. Socket 4,4.5,5,5.5,6,7,8,9,10,11,12,13mm 1-Digital Detecting Screwdriver TOOLS SETS 1－1/4" Dr. Quick-Release Ratchet 2-Screwdriver Slotted 6x38,5x100mm 1 - 1/2" Dr. Quick-Release Ratchet 1－Adjustable Wrench 6" － 1 1/4" Dr. Bit Adapter 2- Screwdriver Phillips 5x100,6x100mm 2－1/4" Dr. Bit Adapter, Spinner Handle － 9 1/2" Dr. Socket 10,12,13,14,15,16,17,19,22mm 3-Long Nose Plier6", Diagonal Nose Plier6", 12－1/4" Dr. Socket 4,4.5,5,5.5,6,7,8,9,10,11,12,13mm 1－1/2" Dr. Extension Bar 5" 8－Comb. Wrench10,11,12,13,14,15,17,19mm 2－Long Nose Plier 6",Diagonal Plier 6" 1－1/2" Dr. Spark Plug Socket 16mm German-type Lineman's Plier6" － － 2－Screwdriver Slotted 6x38,6x100mm － 8 1/2" Dr. Socket 10,11,12,13,14,15,17,19mm 1-Claw Hammer 8oz 2 Screwdriver Slotted 6x38,6x100mm 2 Long Nose Plier 6",Lineman's Plier 7" 2－Screwdriver Phillips #2x38,#2x100mm － 8－1/2" Dr. Socket 20,21,22,23,24,27,30,32mm 2－Screwdriver Phillips #2x38,#2x100 1 Straight Jaw Locking Plier 10" 1-Mini Nylon Handled Hacksaw 6" 2－Digital Detecting Screwdriver, Digital Multi-meter － 1 Groove Joint Plier 10" 1－1/2" Dr.
    [Show full text]
  • Hand Tools & Accessories
    Part Number Description Hand Tools & /W90408B 8" DEEP THROAT FORGED, BLACK COLD CHISEL Accessories OXIDE /W9V11R 11" LOCKING VISE GRIP Adapters /W9V11SP 11" LOCKING PLIERS W/ SWIVEL PADS Part Number Description /W9V18R 18" LOCKING VISE GRIP /W9600 1/4 X 5" /W9V6R 6" LOCKING VISE /W9601 5/16 X 5" GRIP /W9602 3/8 X 5 1/2" Part Number Description /W9V6SP 6" LOCKING PLIERS /W9603 1/2 X 6" W/ SWIVEL PADS /W4453 ADAPTER (1/2 F X 3/8 /W9604 5/8 X 6 1/2" M) /W9605 3/4 X 7" /W3452 3/8 DRIVE ADAPTER (3/8 F X1/4 M) /W9606 7/8 X 7 1/2" /W3454 3/8 DRIVE ADAPTER Calipers /W9608 1/2 X 9" TOOLS (3/8 F X 1/2 M) /W9609 3/4 X 12" /W4900 1/2 DRIVE IMPACT /W9607 1" X 8" ADAPTOR 1/2" X 3/8" /W4902 1/2 DRIVE IMPACT ADAPTOR 1/2" X 3/4" /W6900 3/4 DRIVE ADAPTOR Part Number Description (3/4F X 1/2 M) Countersinks /GEN132ME POCKET CALIPER /W6901 3/4 DRIVE ADAPTOR (3/4"F X 1"M) /GEN450-6 6" FLAT LEG DIVIDER /W3899 3/8 DRIVE ADAPTOR /GEN452-12 12" FLAT LEG (3/8"F X 1/2"M) OUTSIDE /GEN452-4 4" FLAT LEG Part Number Description OUTSIDE /GEN452-6 6" FLAT LEG /GEN195-1/2 HSS COUNTERSINK Bolt Cutters OUTSIDE 1/2 /GEN452-8 8" FLAT LEG /GEN195-3/4 HSS COUNTERSINK OUTSIDE 3/4 /GEN454-12 12" FLAT LEG INSIDE /GEN195-5/8 HSS COUNTERSINK 5/8 /GEN454-4 4" FLAT LEG INSIDE /GEN454-6 6" FLAT LEG INSIDE Part Number Description /GEN454-8 8" FLAT LEG INSIDE 18ICBC 18" /GEN729 POCKET CALIPER Gauges 24ICBC 24" 30ICBC 30" 36ICBC 36" 42ICBC 42" CLIP RAIL Part Number Description /GEN231 FEELER GUAGE /GEN251 SCREW PITCH GAGE, C - CLAMP 51 PITCHES, 4-84 /GEN252 SCREW PITCH GAGE, Part Number
    [Show full text]
  • Locking Pliers
    pliers & wrenches www.irwin.eu 2 www.irwin.eu Locking Pliers HISTORY The choice of Professional Tradesmen since 1924 The VISE-GRIP® Locking Tool was invented in the 1924 by a blacksmith in a small town of DeWitt, Nebraska. William Petersen was a Danish immigrant who invented the fi rst locking pliers in his blacksmith shop, and began selling them from the back of his car to farmers and people in surrounding towns. He patented his new idea and called it VISE- GRIP®. Since then, VISE-GRIP® has gained global brand recognition as the fi rst choice for Locking Pliers. Innovation and quality are the core values of the VISE-GRIP® brand. With proven performance in every turn, these are the tools that tradesmen choose fi rst – and pass on to the next generation. IRWIN® VISE-GRIP® family offers a full line of locking pliers, water pump & VDE Pliers. Certifi ed by TÜV. IRWIN® VISE-GRIP® pliers and wrenches continue to set the standard for dependability, quality, and innovation… today and tomorrow. Wherever there’s a need for a quality tool, IRWIN® VISE-GRIP® is on the job. The Original Locking Plier Long Nose Plier Traditional Plier Groovelock 1948 1996 2007 2012 1924 1978 2005 2011 Locking Wrench VDE Plier Fast Release Locking C-Clamp 3 LOCKING PLIERS The NEW IRWIN® Vise-Grip® Fast Release locking tools have a one handed, triggerless release, so they‘re twice as easy to open as the traditional design. Anti-pinch, non-slip ProTouch™ Grips provide comfort, control, and less hand fatigue. [2] irwin® Vise-grip® 10cr fast release [5] 5mm [3] [4] [1] 1.
    [Show full text]
  • Flexcart Engineering Cart Tool List Part Number: FC-20ETS Also Included in Any Flexcart WAT
    FlexCart Engineering Cart Tool List Part number: FC-20ETS Also included in any FlexCart WAT **Subject to change Tools for the Tool Bag Tool # Tool Description 7/16" nut driver 1 3/8" nut driver 2 5/16" nut driver 3 1/4" nut driver 4 Wire stripper 5 Voltage sensor 6 Best quality S2 metal SAE hex wrench set 7 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 Quick change utility knife 8 Multi-bit mini-screwdriver 9 Magnetic pick-up 10 Carpenter's pencil 11 Permanent marker 12 Inspection mirror 13 Pick tool 14 Mini, High Power LED flashlight 15 Precision tweezers 16 Nail set punch 17 6” x #2 philips driver bit 18 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 16' tape measure 19 Nut driver bit set with holder 20 Stubby screwdriver philips/slotted 21 3” socket extension 22 Razor blade scraper 23 7" lineman’s pliers 24 8” groove joint pliers 25 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 8" needle nose pliers 26 7" locking pliers 27 Scissors 28 10" Torpedo level 29 ½” wood chisel 30 3/8” socket wrench 31 SAE 5/16" through 3/4" socket set with rack 32 9 in 1 multi-bit screwdriver 33 ¼ x 4 flat head screwdriver 34 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 6” round file 35 6 in 1 painter's tool 36 Saw handle 37 Saw Blades 38 6” adjustable wrench 39 Mini pry bar 40 Small wire brush 41 Small plastic bristle brush 42 Tools for the Front Compartment of the Cart ool Numb Tool Description 1-½” putty knife 60 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 Southwire Infrared thermometer 61 Southwire
    [Show full text]
  • NKCTC Firefighter Fundamentals Manual
    NKCTC Firefighter Fundamentals SEPTEMBER 2020 North King County Training Consortium TABLE OF CONTENTS (Click on any title to jump to that SECTION) SECTION SECTION TITLE 1 Hand Tools 2 Rope 3 Power Equipment 4 Personal Protective Equipment (PPE) 5 Self-Contained Breathing Apparatus (SCBA) 6 Forcible Entry 7 Search & Rescue 8 Firefighter Survivability 9 Ladders 10 Ventilation 11 Hose & Appliances Click the button to return to this page HAND TOOLS Alan wrench set/Hex key/ Allen key: because the flat head can be used as a striking tool. Long arching swings should not be used with axes. This method increases the danger of hitting other members or overhead obstructions. When using a A tool with a hexagonal cross-section used wooden handled axe, due to the grain of to drive bolts and screws that have a the wood, the strongest axis when using the hexagonal socket in the head (internal axe to pry is in line with the head or pick of wrenching hexagon drive). They may be the axe. Care must be used when prying in either American or Metric sizes. the direction of either side of the head of the axe. AXES Pry Axe: Pick Head Axe: The pry axe has features not normally found Comes with a 28-36” handle with a 6-8 lb. on traditional rescue tools. The head of the axe head on one side and a pick head on tool has a shortened pick head axe with the other. This is an excellent prying tool serrated teeth on the underside of the axe when the pick end is engaged.
    [Show full text]
  • Visual Control Cabinet Tool Storage Heavy Duty Torque Wrenches
    SALES BLASTER 2015 4th QUARTER Visual Control Cabinet Tool Storage Keyed entry secures tools and inventory SEE PAGE 2 Heavy Duty Torque Wrenches Used on large and heavy equipment applications SEE PAGE 7 Tools@Height Keep your people safe and assets secure with our Tools@Height program SEE PAGE 4 Hydraulic Maintenance Kit Portable for easy use in the plant and on the job site. SEE PAGE 10 OFFER VALID WHILE SUPPLIES LAST OCTOBER 1, 2015 TO JANUARY 31, 2016 1 KEYLESS TOOL CONTROL Keyless Entry system secures your tool box, allowing you to control and limit access without the hassle of keys Product Code Description List Price: Sale Price: WTC26RC7 26" Keyless Entry Box $2,703.05 $1,158.45 WTC40RC7 40" Keyless Entry Box $3,341.05 $1,431.90 WTC55RC11 55" Keyless Entry Box $5,093.78 $2,183.05 Features • Grants access to tool boxes with three access methods: • Keyless entry system offers badge, -Keypad PIN entry only keypad entry, and at the box programming -Proximity ID card entry for up to 3,000 users -Dual Credential: Proximity ID card • Eliminates the hassle of keys to open and keypad PIN entry tool boxes. • Pre-assembled access unit sits on • Battery power makes Keyless Tool top of the box - Implement by simply Control ideal for environments where tool installing batteries and setting up access boxes are on the move. credentials. • Powered by 6 D-cell batteries (not • LED lights indicate if box is opened included) or power cord or closed • Single set of batteries can last up to six • Last Access indicator displays who last months depending upon environment accessed the box.
    [Show full text]