Flexcart Engineering Cart Tool List Part Number: FC-20ETS Also Included in Any Flexcart WAT

Total Page：16

File Type：pdf, Size：1020Kb

FlexCart Engineering Cart Tool List Part number: FC-20ETS Also included in any FlexCart WAT **Subject to change Tools for the Tool Bag Tool # Tool Description 7/16" nut driver 1 3/8" nut driver 2 5/16" nut driver 3 1/4" nut driver 4 Wire stripper 5 Voltage sensor 6 Best quality S2 metal SAE hex wrench set 7 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 Quick change utility knife 8 Multi-bit mini-screwdriver 9 Magnetic pick-up 10 Carpenter's pencil 11 Permanent marker 12 Inspection mirror 13 Pick tool 14 Mini, High Power LED flashlight 15 Precision tweezers 16 Nail set punch 17 6” x #2 philips driver bit 18 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 16' tape measure 19 Nut driver bit set with holder 20 Stubby screwdriver philips/slotted 21 3” socket extension 22 Razor blade scraper 23 7" lineman’s pliers 24 8” groove joint pliers 25 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 8" needle nose pliers 26 7" locking pliers 27 Scissors 28 10" Torpedo level 29 ½” wood chisel 30 3/8” socket wrench 31 SAE 5/16" through 3/4" socket set with rack 32 9 in 1 multi-bit screwdriver 33 ¼ x 4 flat head screwdriver 34 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 6” round file 35 6 in 1 painter's tool 36 Saw handle 37 Saw Blades 38 6” adjustable wrench 39 Mini pry bar 40 Small wire brush 41 Small plastic bristle brush 42 Tools for the Front Compartment of the Cart ool Numb Tool Description 1-½” putty knife 60 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 Southwire Infrared thermometer 61 Southwire 400A AC Clamp Meter 62 Best quality S2 metal metric hex wrench set 63 6" wire cutters 64 Metric 8mm through 17mm socket set with rack 65 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 6” socket extension 66 SAE 1/4" through 11/16" combination wrench set with roll-up 67 10” adjustable wrench 68 10” locking pliers 69 3/16 x 6 flat-head screwdriver 70 3/8 x 6 flat-head screwdriver 71 #3 x 6 phillips screwdriver 72 3” putty knife 73 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 Awl 74 Soft mallet 75 15’ extension cord 76 12" Hacksaw 77 Caulk gun 78 All purpose cutters 79 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 10” groove joint pliers 80 Claw hammer 81 12" aluminum pipe wrench 82 Metal file- flat/round 83 2HP, 1.5 gallon, mini Shopvac vacuum with attachments 84 ©2019 FlexCart, LLC • www.flexcartllc.com • 614-348-2517 .

Copy Link

Recommended publications

KNIPEX Mini Catalog
KNIPEX Quality – Made in Germany Mini-Catalog The KNIPEX brand stands for reliability in every single tool. If you need a tool to get the job done the first time, every time, make sure to select KNIPEX. In this mini-catalog, you will find the most popular and highly sold tools designed to meet the various needs of professional tool users. With a limited lifetime warranty for every tool, you can’t go wrong in adding a quality tool like KNIPEX to your toolbox. www.knipex-tools.com KNIPEX Quality – Made in Germany Cobra® Water Pump Pliers 87 02 180 87 01 250 > Self-gripping jaw design won’t slip > Gripping surface with special hardened teeth (approx. 61 HRC) is wear resistant and grips any shaped object – round, square, hex or flat 87 01 560 > Self-locking on pipes and nuts means no slipping off the workpiece > Patented push-button mechanism means adjust Round Square Hex Flat once and it stays > Fine-adjustment provides an optimum adjustment to different size workpieces > Guard prevents finger and hand pinching > Thin head fits into tight spaces Maximum Adjustment KNIPEX Part # Description Capacity Positions Handle Style 87 00 100 4" Cobra Pliers 1" 11 embossed 87 01 125 5" Cobra Pliers 1 1/16" 13 plastic dipped 87 01 150 6" Cobra Pliers 1 1/4" 11 plastic dipped 87 01 180 7 1/4" Cobra Pliers 1 1/2" 18 plastic dipped 87 02 180 7 1/4" Cobra Pliers 1 1/2" 18 comfort grip 87 01 250 10" Cobra Pliers 2" 25 plastic dipped 87 02 250 10" Cobra Pliers 2" 25 comfort grip 87 21 250 10" Cobra QuickSet Pliers 2" 25 plastic dipped 87 28 250 US 10" Cobra Pliers 2" 24 1000V insulated 87 01 300 12" Cobra Pliers 2 3/4" 30 plastic dipped 87 02 300 12" Cobra Pliers 2 3/4" 30 comfort grip 87 21 300 12" Cobra QuickSet Pliers 2 3/4" 30 plastic dipped 87 01 400 US 16" Cobra Pliers 3 3/4" 27 plastic dipped 87 01 560 US 22" Cobra Pliers 4 3/4" 20 plastic dipped Alligator® Water Pump Pliers 88 01 180 88 02 180 88 08 250 US > Self-gripping jaw design won’t slip 88 01 300 > Gripping surface with special hardened teeth (approx.
[Show full text]
Spanners and Wrenches
Spanne rs and Wrench es - the various types open spanners - ring spanners - adjustable - box spanner - socket allen keys - torque wrench - pipe wrench - basin spanner - tips Spanners come in all shapes and sizes, many being developed to deal with a specific job. By far the most important consideration when using a spanner is to ensure that it fits the nut perfectly. Too loose, and it will round the comers of the nut - and slip, often damaging the nut. Spanner and your hand. When purchasing spanners, select good quality tools. The best types are forged from carbon steel or chrome vanadium, if not abused, these will last a lifetime. Open ended - 'C' spanner The open ended spanner is the most common type, and may have a single or double end. The head has its jaws offset by about 15 degrees from the run of the shaft. This is so the spanner can be turned over to engage different flats of a nut when working in confined spaces. Another version, called an obstruction spanner, is designed for use in confined spaces. It has one head set at anything upto 90 degrees to the shaft, and the shaft may have a slight curve. Ring spanner As the name implies, the ring spanner usually has a completely enclosed head, and may have six or 12 flats. A 12 flat spanner engages upon the corners of the nut and can engage both hexagon and square bolts. A six flat spanner is normally shaped to fit against all 6 sides of hexagon nuts, this ensures a very tight fit and can allow considerable force to be applied.
[Show full text]
Specialty Tools Brake Tools
Specialty Tools SPECIALTY TOOLS • Includes sizes T-40, T-45, T-50. • All Torxbits are made of heat-treated alloy steel. 27740 - 3 pc. set includes T-40, T-45, T-50 sizes BRAKE TOOLS for servicing disc brakes fitting GM and Ford brake caliper Torx bolts. • 3-Stone Hone Fits Cylinders to 2" (21.4-50.8mm). • Available Individually: 26620 T-40 3/8" drive, 26630 T-45 3/8" drive, 26640 T-50 3/8" drive • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in Lisle Brake Caliper Torx Bit Set LST 27740 step-cut and blind-end cylinders. 240 grit stones are 1 1/8" long. Flexible driver. • # 10050 Replacement Stones • Hardened alloy steel bits. Lisle Brake Cylinder Hone LST 10000 • Professional sand finish. • Sizes: T40, T45 & T50. Performance Tool 3 Pc Brake Caliper Star Bit Set • 2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm). WIL W1337 • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in step-cut and blind-end cylinders. 240 grit stones are • Hangs the Disc Brake Caliper Out of the Way During Service While 1-1/8" long. Flexible driver. Keeping Tension Off the Brake Line. • # 10550 Replacement Stones • Helps prevent damage to calipers and lines when servicing brakes, Lisle Brake Cylinder Hone LST 10500 suspension, hubs and more. • Overall length of 9" for hanging the disc brake caliper out of the way while keeping tension off the brake line.
[Show full text]
United Rentals Tool Solutions Catalog
United Rentals Tool Solutions Catalog UnitedRentals.com | 800.UR.RENTS © 2017 United Rentals, Inc. 38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM Tool Solutions Products 38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM TABLE OF CONTENTS Cooling, Ventilation & Vacuum ........... 2-3 Piping................................................. 21-25 Sanders & Grinders................................42 Air Horns .....................................................2 Flange Spreaders......................................24 Angle Grinders & Sanders ........................42 Blowers ................................................... 2-3 Hydrostatic Test Pump Air........................21 Hand Sanders ...........................................42 Cooling Fans...............................................2 Geared Threader.......................................21 Belt Sanders..............................................42 Cooling Trailers ...........................................2 Threading Machines..................................21 Saws .................................................. 43-44 Vacuums .....................................................3 Pit Bull.......................................................22 Reciprocating Saws ..................................43 Rolling Unit................................................22 Air Tools ................................................ 4-7 Band Saws................................................43 Track Unit..................................................22 Texas Pneumatic Ventilation
[Show full text]
The Dictionary of Entomology
THE DICTIONARYOFENTOMOLOGY. Original text Copyright © 1914 Nigel K. Jardine probably expired. Ihav e made manyattempts to determine the copyright status of the orginal work. In 1914 in England, copyright extended for the life of the author,plus fify years. Ihav e attempted to obtain biographical material for N. K. Jardine without success, nor have I been able to locate an obituary for him, and so without knowing the year of his death it is not possible to determine when the copyright of the original work expired. When I consulted a firm of copyright lawyers, theytoo were unable to determine theyyear the copyright expired. Their advice was that the copyright of the original work has most probably expired. If anyreader has more acurate information about N. K. Jardine or the copyright status of the original work, I would appreciate receiving it at the address below. The original was printed in 10 point type on a 12 point pitch. The page images in this PDF file are approximately 1.6 times the size of the original. Facsimile images and retouching Copyright © 2001, 2003 Peter Miller The pages of this electronic copyofThe Dictionary of Entomology may be used and/or printed free of charge for personal use only.You are permitted to copyand distribute verbatim copies of this CD-Rom free of charge. In particular,this copyright notice must remain intact. Please contact Peter Miller at the address belowfor permission to redistribute on anyother basis or include in anyother medium or compilation. Adonation of $20 would be appreciated if you find this work useful.
[Show full text]
OVER 500 PRODUCTS INSIDE... All Prices and Part Numbers Are Correct at Time of Printing
THE YIELD Agricultural Engineers Since 1894 PARTS THE BIGGESTALL BRANDS IN ONE PLACE GUIDE £71.96 INC VAT Draper Page 16-19 Ledlenser Page 4 OFFER £179.10 INC VAT Squire Locks Page 30 Buckler Boots Stihl Page 10-11 Page 24-30 OVER 500 PRODUCTS INSIDE... All prices and part numbers are correct at time of printing. Summer 2021 | www.peacock.co.uk 04 LEDLENSER 05 Our aim is simple, CTEK to provide quality 06 products to farmers OVERALLS 08-09 & farm contractors at the best CASTLE CLOTHING possible pricing with off the shelf 10-11 availability. Our parts departments BUCKLER BOOTS 14-15 carry over 40,000 shelf lines with a stock value in excess of £4 DRAPER - POWER TOOLS 16 million. We welcome all enquiries from new and existing customers DRAPER - HAND TOOLS 17 including large buying groups and DRAPER - ACCESSORIES cooperatives. 20 STIHL - CHAINSAWS 21 Stephen Bradford STIHL - HEDGERS 22 Group Parts Manager STIHL - GRASS TRIMMERS 23 STIHL - BLOWERS Our depots 24 STIHL - KOMBI 25 Brigg The Old Foundry, Brigg, STIHL - MOWERS 26 North Lincolnshire, DN20 8NR t. 01652 600 200 STIHL - OILS & LUBRICANTS 28 Corringham HAYTER High St, Corringham 29 Gainsborough, Lincolnshire DN21 5QP AUTOGLYM 30 t. 01427 838 696 SQUIRE LOCKS 31 Halsham Halsham, Hull, HU12 0BT WÜRTH 01964 614 233 t. AgriculturalSince 1894Engineers 2nd Quarter 2021 | www.peacock.co.uk Louth QUALITY USED MACHINERY Contents MF9380 Page 12 MF9380 T MF7282 AL HEADER Welcome 02 Quality Used Machinery 03 Agricultural Engineers Grimsby Rd, Louth Summer Combine Demonstration 04-05 Since 1894 IT’S ALL Serving your Furry Friends 06 Meet the Team - Selby Parts 07 ABOUT..
[Show full text]
Pliers, Clamping, & Cutting
PLIERS, CLAMPING, & CUTTING TABLE OF CONTENTS XL SERIES PLIERS . 742-743 LOCK JOINT PLIERS . .744 POWER-TRACK® II PLIERS . .745 ASSORTED PLIERS SETS . .746 NEEDLE-NOSE PLIERS . 747-748 CUTTING PLIERS . 749-752. LINEMAN'S PLIERS . 752-753. SPECIALTY PLIERS. 754 MINIATURE PLIERS . 755. LOCKING PLIERS . 756-762. LOCKING C-CLAMPS . 762-765 SAFETY WIRE TWISTERS. 766 WIRE STRIPPERS & CUTTERS . .767 AUTOMOTIVE PLIERS . 768-769. RETAINING RING PLIERS SETS . 770-772 RETAINING RING PLIERS . 773-774 1000V PLIERS . 775-781. HACKSAW . 782. C-CLAMPS . 782-784 EYE BOLTS . 785. SNIPS . 785-787 . MULTI-PURPOSE TOOLS . .787 KNIVES. 788 PROTO® STAINLESS STEEL ELECTRICIAN'S SCISSORS A handy electrician's tool that can accomplish common tasks like stripping, crimping, cutting, and snipping from thin delicate wires to thicker multi-core cables, conveniently locked on the belt until needed. Ergonomic handles with hole for tethering. Built-in wire stripper can strip and crimp for AWG 12, 14 and 16 cables. Stainless steel construction. Includes a holder with a quick release button and a belt clip. Cuts multi- wire cables and snips tiny wires. Micro anti-slip teeth on blades for better cutting grip. SAFETY WIRE PLIERS Safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration and other forces. The presence of safety wiring also serves to indicate that the fasteners have been properly tightened. Safety wire is available in a variety of gauges and materials, depending on the application. In aircraft and racing applications, stainless steel wire is used, most commonly in .032" diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored to a second fastener or part, then twisted again.
[Show full text]
IRWIN Industrial Tools
LockingLocking ToolsTools The Professionals Choice Since 1924 The VISE-GRIP® Locking Tool was invented in 1924 by a blacksmith in the small town of DeWitt, Nebraska. Eight decades and more than a half-billion tools later, IRWIN® VISE-GRIP continues to be handcrafted in the U.S.A with the same quality and dependability that trade professionals have trusted and preferred since the beginning. Our expertise in design and manufacturing produces locking tools with more than twice the life and signifi cantly more strength than other tools on the market. And to further meet the needs of professional tool users, IRWIN VISE-GRIP is now available in three handle confi gurations: The Original™, ProTouch™ and Fast Release™. A Perfect Grip for Any Job The Original IRWIN VISE-GRIP Locking Tools provide powerful locking force using the classic triggered design. The Original® Locking Tools 10 pc. Set with Kitbag 10R®, 10WR®, 7R®, 7WR®, 7LW®, 5WR®, 6LN®, 9LN®, 6R®, 11R® #1078KB IRWIN VISE-GRIP ProTouch Locking Tools provide a cushioned handle and rugged grip for all of your toughest jobs. The cushioned grip reduces vibration, hand fatigue and helps prevent slipping - even for greasy, oily hands. www.irwin.com Locking Tools Introducing the new IRWIN® VISE-GRIP® Fast Release™ Locking Tool. It offers the strength and durability of The Original™ with the performance advantage of a release that is 2x easier to open. It unlocks from any angle without needing to press a trigger, making it ideal for professionals who work in tight spaces. The Fast Release locking tool also offers more fi nger room to accommodate large hands and professionals who wear gloves.
[Show full text]
Catalog of Wrenches for the Antique Wrench & Tool
CATALOG OF WRENCHES FOR THE ANTIQUE WRENCH & TOOL AUCTION SATURDAY, SEPT. 26 AT THE CLARION HOTEL & CONFERENCE CENTER 5202 North Brady Street - DAVENPORT, IOWA AUCTION STARTS AT 11: AM Saturday (approximately one half hour after Wrench Club Meet ends) Auction is open to the public CONTACT INFORMATION Auction Manager: Absentee Bids: Don 'Bus' Haury Stan Schulz 7913 SW 24th - Halstead, KS, 67056 659 E 9th - York, NE 68467-3109 316-284-7345 or 316-283-5876 402-362-7686 [email protected] [email protected] This auction originated as a consignment auction and we have received consignments from several people including Dough Busch who will be selling his collection over the next couple years, Dan Gaier, Don Ervin and Robert Matz. The bulk of the auction consists of the collection of Wilbur Hall of Wagner, South Dakota, His collection consists of several hundred wrenches and hammers and is especially strong in combination type tools. The hammers will be sold by The Great Planes Trading Company at auction in October in St. Louis. There will be a catalog on the Great Planes Trading Company Website at www.greatplanestrading.com by mid August. Terms of the sale: All bids & settlement in U.S. Currency. Cash or check with proper id. No items to be removed until settled for. Auction Co. & owners shall not be responsible for any accident or loss. Sold as is where is. No guarantees or warranties expressed or implied. Statements made sale day will take precedence over any printed ad. We are not able to accept credit cards at this auction.
[Show full text]
Heavy-Duty Pipe Wrenches
wrenches Heavy-Duty Pipe Wrenches Catalog Model Nom. Size Pipe Capacity Weight Std. No. No. in. mm in. mm lb. kg Pack 31000 6 6 150 3⁄4 20 1⁄2 0,2 6 31005 8 8 200 1 25 3⁄4 0,3 6 31010 10 10 250 11⁄2 40 13⁄4 0,8 6 31015 12 12 300 2 50 2 3⁄4 1,2 6 Straight Pipe Wrench 31020 14 14 350 2 50 31⁄2 1,6 6 • Sturdy, cast-iron housing and I-beam handle with full floating forged 31025 18 18 450 21⁄2 65 53⁄4 2,6 6 31030 24 24 600 3 80 93⁄4 4,4 3 hook jaw, featuring self-cleaning threads with replaceable hook and 31035 36 36 900 5 125 19 8,7 1 heel jaws. 31040 48 48 1200 6 150 341⁄4 15,6 1 31045 60 60 1500 8 200 511⁄4 23,3 1 • Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A. Fittings Nom. Size Pipe Capacity Weight Catalog Model Cap. Std. No. No. Pack in. mm in. mm in. mm lb. kg 10348 10 10 250 11⁄2 37.5 1 25 1.6 0,7 1 10358 14 14 350 2 50 1½ 37.5 3.1 1,4 1 RapidGrip® • Quick one-handed operation makes your jobs move faster. • The spring-loaded jaw design provides rapid ratcheting action. • Unique combination heel/hook jaw design aggressively bites the work piece and ensures a secure grip.
[Show full text]
HOLE-HOG Models 1000C 1000C-TH ALLIED 1000C Series Hole-Hogs
TECHNICAL Construction Products, LLC MANUAL Manual Part No. 002050 September 22, 2003 HOLE-HOG Models 1000C 1000C-TH ALLIED 1000C Series Hole-Hogs Allied Hole-Hog, Model 1000C Series Document Change Notice Date Page Change 11/12/99 17 thru 39 Updates to Disassembly, Assembly and Maintenance 09/22/03 Throughout Update to CE Compliance and specifications ALLIED 1000C Series Hole-Hogs TABLE OF CONTENTS Section Page SECTION 1.0 INTRODUCTION ............................ 1 1.1 Safety Information................................. 1 1.2 Warranty Information ............................... 1 1.3 Allied Product Policies............................... 1 SECTION 2.0 OVERVIEW ............................... 3 2.1 Body/Anvil ..................................... 3 2.1.1 Plain Anvil (1000C) ............................... 3 2.1.2 Threaded Anvil (1000C-TH) .......................... 3 2.2 Striker ....................................... 3 2.3 Tail Assembly ................................... 3 2.4 Differences Between Models ........................... 3 SECTION 3.0 SPECIFICATIONS AND DECALS ..................4 3.1 Specifications ................................... 4 3.2 Minimum Recommended Operating Depths ...................4 3.3 DECAL IDENTIFICATION .........................5 SECTION 4.0 GENERAL CONSTRUCTION SAFETY ...............9 4.1 Owner’s Responsibilities ............................. 9 4.2 General Construction Safety ........................... 9 4.3 Federal, State, Local and OSHA Construction Guidelines and Regulations . 9 4.4 General Safety Summary
[Show full text]
Instructions For
INSTRUCTIONS FOR: WORKING TERMINOLOGY: Figure 1 REAR HANDLE FRONT MOTOR HANDLE CAUTION! HOUSING SPINDLE LOCK BUTTON SWITCH DUST KEEP CONTROL HANDS AWAY! BLADE HEIGHT EXPOSED WHILE nkSafe ADJUSTMENT CUTTING hi ty THREE-ARM T • W • KNOB n DEPTH e o HEIGHT LOCKING a i GAUGE CRAIN t WING SCREW r c E e ye ot DEPTH GAUGE BLADE Pr ADJUSTMENT REFERENCE DEPTH GAUGE GUARD SCALE LINES THREE-ARM KNOB No. 835 Heavy-Duty Undercut Saw WARNINGS: • IN USE, KEEP ONE HAND ON THE FRONT HANDLE AND ONE HAND ON THE REAR HANDLE. DON’T REMOVE A HAND TO CLEAR DEBRIS. • SWITCH OFF AND UNPLUG SAW BEFORE MAKING ANY ADJUSTMENTS, BLADE CHANGE OR REPAIRS. BLADE MUST BE STOPPED. KICKBACK HAZARDS: • THE SAW PLUNGE-STARTS. PLUNGE SLOWLY BEFORE PUSHING FOR- WARD! • KEEP RPMs HIGH. DON’T FORCE THE SAW, ESPECIALLY WHEN NAILS MAY BE PRESENT. • HEIGHT ADJUSTMENT: KEEP THE BLADE HOUSING FLAT ON LEVEL FLOORS, AND KEEP BLADE PARALLEL TO THE FLOOR AT ALL TIMES. • ALWAYS PUSH THE SAW AGAINST THE BLADE ROTATION. NEVER PULL THE SAW TOWARDS YOURSELF OR CUT IN REVERSE. SAFE OPERATING POSITION: KEEP KNEES AND OTHER BODY PARTS OUT OF KICK BACK ARC. KNEEL TO THE SIDE! DO NOT USE STANDING UP! CUTTING DIRECTION SAFETY FIRST This saw is designed for undercutting affixed wooden door jambs, moldings, base, and masonry, tile and stone walls to fit new flooring underneath. Do not use this saw for sanding floors, cutting metal, or any purpose not described in this manual. HANDLES: In use, keep both hands on the handles at all times.
[Show full text]