DOCSLIB.ORG

Hand Tools & Accessories

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hand Tools & Accessories Part Number Description Hand Tools & /W90408B 8" DEEP THROAT FORGED, BLACK COLD CHISEL Accessories OXIDE /W9V11R 11" LOCKING VISE GRIP Adapters /W9V11SP 11" LOCKING PLIERS W/ SWIVEL PADS Part Number Description /W9V18R 18" LOCKING VISE GRIP /W9600 1/4 X 5" /W9V6R 6" LOCKING VISE /W9601 5/16 X 5" GRIP /W9602 3/8 X 5 1/2" Part Number Description /W9V6SP 6" LOCKING PLIERS /W9603 1/2 X 6" W/ SWIVEL PADS /W4453 ADAPTER (1/2 F X 3/8 /W9604 5/8 X 6 1/2" M) /W9605 3/4 X 7" /W3452 3/8 DRIVE ADAPTER (3/8 F X1/4 M) /W9606 7/8 X 7 1/2" /W3454 3/8 DRIVE ADAPTER Calipers /W9608 1/2 X 9" TOOLS (3/8 F X 1/2 M) /W9609 3/4 X 12" /W4900 1/2 DRIVE IMPACT /W9607 1" X 8" ADAPTOR 1/2" X 3/8" /W4902 1/2 DRIVE IMPACT ADAPTOR 1/2" X 3/4" /W6900 3/4 DRIVE ADAPTOR Part Number Description (3/4F X 1/2 M) Countersinks /GEN132ME POCKET CALIPER /W6901 3/4 DRIVE ADAPTOR (3/4"F X 1"M) /GEN450-6 6" FLAT LEG DIVIDER /W3899 3/8 DRIVE ADAPTOR /GEN452-12 12" FLAT LEG (3/8"F X 1/2"M) OUTSIDE /GEN452-4 4" FLAT LEG Part Number Description OUTSIDE /GEN452-6 6" FLAT LEG /GEN195-1/2 HSS COUNTERSINK Bolt Cutters OUTSIDE 1/2 /GEN452-8 8" FLAT LEG /GEN195-3/4 HSS COUNTERSINK OUTSIDE 3/4 /GEN454-12 12" FLAT LEG INSIDE /GEN195-5/8 HSS COUNTERSINK 5/8 /GEN454-4 4" FLAT LEG INSIDE /GEN454-6 6" FLAT LEG INSIDE Part Number Description /GEN454-8 8" FLAT LEG INSIDE 18ICBC 18" /GEN729 POCKET CALIPER Gauges 24ICBC 24" 30ICBC 30" 36ICBC 36" 42ICBC 42" CLIP RAIL Part Number Description /GEN231 FEELER GUAGE /GEN251 SCREW PITCH GAGE, C - CLAMP 51 PITCHES, 4-84 /GEN252 SCREW PITCH GAGE, Part Number Description 22 PITCHES, 9-40 /W250 1/2 X 9 1/4 /GEN255MM SCREW PITCH GAGE /W251 1/2 X 11 /GEN26 SCREW & WIRE /W254 1/2 X 13 1/2 GAUGE Part Number Description /W242 1/4 X 6 /W90403B 3" DEEP THROAT /W244 1/4 X 4 1/2 FORGED, BLACK OXIDE /W253 3/4 X 11 Hack Saw Frame /W90404B 4" DEEP THROAT /W249 3/8 X 9 1/4 FORGED, BLACK /W252 3/8 X 11 OXIDE Part Number Description /W90406B 6" DEEP THROAT /41-0004 12" HEAVY DUTY FORGED, BLACK HACKSAW FRAME OXIDE 253 Hand Tools & HAMMERS - DEAD Magnets Accessories BLOW/RUBBER MALLET HAMMERS - BALL PEEN, FIBERGLASS Part Number Description HANDLE /GEN369 MAGNETIC STRIP 1" X 10’ Part Number Description /GEN370-2 PERMANENT HORSESHOE ALNICO /W9022 2 LB RUBBER MAGNET 2 OZ. MALLET /W9024 2 LB DEAD BLOW /GEN383X TELESCOPING Part Number Description HAMMER MAGNET /GEN384 FLEX MAGNET /W9040 8 OZ /W9026 4 LB DEAD BLOW HAMMER /GEN385 POCKET MAGNET /W9041 12 OZ /W9029 2.5 LBS.BRASS /W9043 20 OZ HAMMER W/SUPER /W9044 24 OZ GRIP /W9045 32 OZ Measuring Tapes /W9042 16 OZ TOOLS Levels & Accessories Hammers - Claw & Ripping Part Number Description /LUF100 3/8" X 100’ STEEL TAPE Part Number Description /LUF100L 3/8" X 100’ STEEL TAPE /28020 16" CONTRACTOR /LUF2125 1" X 25’ POWER TAPE MODEL 80-A 2000 /GEN827 POCKET LEVEL Part Number Description /LUF2130 1" X 30’ POWER TAPE /W9050 16 OZ CLAW HAMMER /GEN839 MAGNETIC 2000 TORPEDO LEVEL /W9051 20 OZ RIPPING /LUF2133 1" X 33’ POWER TAPE /GEN844 LEVEL/STUD FINDER HAMMER /LUF2223CME 1/2" X 3M (10’) 2000 /GEN846 LINE LEVEL /LUF2312 3/4" X 12’ POWER /GEN847 BULL’S EYE LEVEL TAPE 2000 /GEN848 LINE LEVEL /LUF2316 3/4" X 16’ POWER HAMMERS - CROSS /GEN849 CROSS CHECK TAPE 2000 MULTI-PURPOSE, /LUF2325 3/4" X 25’ POWER PEEN, DRILLING TWO DIRECTIONAL TAPE 2000 /20030 END CAPS FOR /LUF50 3/8" X 50’ STEEL LEVELS MOD#87&187 TAPE /21999 PL-360/MAGNETIC /LUFHV1425 1" X 25’ ORANGE TORPEDO LEVEL HI-VIS.POWER TAPE /24640 24" JOURNEYMAN /LUFW6110 1/4" X 10’ PEE WEE Part Number Description DELUXE MODEL 187 TAPE /W9052 3 LBS SMALL /24670 48" JOURNEYMAN /LUFW616 1/4" X 6’ PEE WEE DRILLING HAMMER DELUXE MODEL 187 TAPE /W9053 3 LBS CROSS PEIN /27020 48" RIB REINFORCED /LUFY23CME 1/2" X 3M (10’) MAGNETIC LEVEL ULTRALOK TAPE /W9054 4 LBS CROSS PEIN MODEL 87M /27060 24" RIB REINFORCED MAGNETIC LEVEL MODEL 87M /30005 24" LEVEL CASE /30010 48" LEVEL CASE 254 Hand Tools & Nutdriver Pliers - Cutting Accessories Metric Combination Part Number Description Part Number Description Wrench - 12PT /W9C337 LAP JOINT PLIERS /W9220 3/16" HOLLOW SHAFT /W9C357 END CUTTER /W9222 1/4" HOLLOW SHAFT /W9C436 6" BOX JOINT /W9224 5/16" HOLLOW /W9C437 7" BOX JOINT SHAFT /W9C447 7 3/4" BOX JOINT /W9225 11/32" HOLLOW CURVED DIAG. Part Number Description SHAFT /W9V8R 8" LOCKING SHEET /W11-09 9MM /W9226 3/8" HOLLOW SHAFT METAL /W11-10 10MM /W9227 7/16" HOLLOW TOOLS /W11-11 11MM SHAFT /W9228 1/2" HOLLOW SHAFT /W11-12 12MM Pliers - Linesman /W11-13 13MM /W9214 11PC SET 3/16" - 5/8" /W11-14 14MM /W9218 10PC METRIC SET 4MM-11MM /W11-15 15MM /W11-16 16MM /W11-17 17MM Part Number Description /W11-18 18MM Pin Vises /W9C347 7" ROUND NOSE /W11-19 19MM /W9C348 8" ROUND NOSE /W11-20 20MM /W9C349 9" WIREMASTER /W9C369 9" HIGH LEVERAGE Metric Part Number Description /GEN90 PIN VISE, DOUBLE Combination END Pliers - Long Nose Wrench Sets - 12PT /GEN94A PIN VISE SET 0. TO 0.55 /GEN94-A PIN VISE Part Number Description /RMPV-1 PIN VISE-DRILL SZS /W750 11 PC. 7-19MM #80-#68 /W752 15PC 7-22MM /RMPV-2 PIN VISE-DRILL SZS Part Number Description #67-#52 /W758 18PC 7-24MM /W9V6LN 6" LOCKING PLIERS W/ WIRE CUTTER /W9C317 7 1/2" W/ SIDE CUTTER Pliers - Curved Mirrors /W9C318 8" W/SIDE CUTTER Jaw Locking /W9C326 W/ SIDE CUTTER /W9C386 CURVED WITH SERRATED JAWS Part Number Description Part Number Description /GEN555 8" INSPECTION /W9V5WR 5" W/ WIRE CUTTER CIRCULAR /GEN557 /W9V7CR 7" TELESCOPING INSPECTION /W9V7WR 7" W/ WIRE CUTTER /GEN560 RECTANGULAR /W9V10CR 10" TELESCOPING /W9V10WR 10" W/WIRE CUTTER INSPECTION /W9701 ROUND INSPECTION 2 1/4" 255 Part Number Description Hand Tools & /W9C440 12" Punches - Arch /W9C414 14" Accessories /W9C460 16" Pliers - Slip Joint Pry Bar Part Number Description /GEN1271A 1/4" /GEN1271AA 3/16" Part Number Description /GEN1271B 5/16" /W9C546 6" HVY DUTY W/ /GEN1271C 3/8" CUTTING SHEARERS Part Number Description /GEN1271D 7/16" /W9C537 7" /W9575 1/2 X 14" /GEN1271E 1/2" /W9C548 8" HVY DUTY W/ /W9576 5/8 X 18" /GEN1271F 9/16" CUTTING SHEARERS /W9577 3/4 X 20" /GEN1271G 5/8" /GEN1271H 11/16" /GEN1271I 3/4" Pliers - Snap Ring /GEN1271K 7/8" Punch - Pin /GEN1271L 15/16" TOOLS /GEN1271M 1" /GEN1271N 1 1/8" /GEN1271O 1 1/4" Part Number Description /GEN1271P 1 3/8" Part Number Description /W9H1234 RETAINING RING /GEN1271Q 1 1/2" PLIER W/TIPS /W9590 1/16 X 4 /W9H1265K SNAP RING PLIER /W9591 3/32 X 4 1/2 SET 3PC /W9592 1/8 X 4 3/4 /W9593 5/32 X 5 PVC Cutter /W9594 3/16 X 5 1/4 Pliers - Straight /W9595 7/32 X 5 1/2 Jaw Locking /W9596 1/4 X 5 3/4 /W9597 5/16 X 6 /W9598 3/16 X 3 1/2 X 8" Total Part Number Description Length SWIVEL CUTTER 1/8" /W9599 1/4 X 3 1/2 X 8" Total /GEN124 Length TO 1-1/8" CAPACITY Part Number Description /GEN119 PVC CUTTER /VC42A PVC PIPE CUTTERS /W9V7R 7" STRAIGHT JAW LOCKING PLIERS /W9V10R 10" STRAIGHT JAW Punches LOCKING PLIERS SCRAPER Pliers - Tongue & Groove Part Number Description /W9586 LINE UP PUNCH (DRIFT) 3/8 X 15" Part Number Description /W9587 LINE UP PUNCH /W9488 FLEXIBLE 1 1/4" (DRIFT) 1/2 X 18" BLADE /W9663 14PC PUNCH & /W9489 FLEXIBLE 3" BLADE Part Number Description CHISEL KIT /W9C424 4 1/2" /GEN77 AUTOMATIC CENTER PUNCH /W9C426 6 1/2" /GEN78 AUTOMATIC CENTER /W9C420 9 1/2" PUNCH HEAVY DUTY /W9C421 9 1/2" /GENSPC74 CENTER PUNCH SET /W9C430 10" 256 Hand Tools & SCREWDRIVER - Sets - Specialty Accessories PHILLIPS SCREWDRIVER - CABINET TIP Part Number Description Part Number Description /GEN57 DRILL STAND, PLASTIC /W9103 #0 X 6 /GENS838 DRILL STOP SET /W9104 #1 X 7 /GENS75 DRIVE PIN SET, 4" Part Number Description /W9107 #1 X 12 LONG - 8 SIZES IN /W9101 #2 X 3 7/16 WOOD CASE /W9112 1/8 X 6 /W9105 #2 X 8-1/4 /GENS475 12 PC NEEDLE FILE /W9113 1/8 X 8 SET /W9108 #2 X 12 1/4 /W9114 3/16 X 7 /GENS476 6 PC 5-1/2" SWISS TOOLS /W9106 #3 X 10 7/8 /W9115 3/16 X 8 PATTERN NEEDLE /W9109 #4 X 13 1/2 FILE SET /W9116 3/16 X 10 /GEN380A SCRIBE SET /W9117 3/16 X 12 /GEN86C SOAPSTONE /W9118 1/4 X 14 1/4 HOLDER WITH 4 SCREWDRIVER - SET STONES /GEN524 PRECISION TRAMMEL SET SCREWDRIVER - FLAT HEAD Round Shank Part Number Description SNIPS - AVIATION /GEN8071 RACHET OFFSET Part Number Description /GENS605 5 BLADE SET /W9127 3/8 X 15 1/2 /GENSPC600 JEWELER’S SET /W9122 1/4 X 3 7/16 /W9476 10PC SET (9122-9135) /W9123 1/4 X 6 /GEN8072 14 PC OFFSET Part Number Description RACHET TOOL SET /W9124 1/4 X 10 1/4 /W9V101 10" LEFT RED /W9125 5/16 X 10 7/8 /W9V102 10" RIGHT GREEN /W9126 3/8 X 13 1/2 /W9V103 10" STRAGHT /W9128 3/8 X 17 1/2 SCREWDRIVER - YELLOW /W9V104 10" UTILITY Specialty /W9V20SL 20" LEFT OFFSET /W9V20SR 20" RIGHT OFFSET SCREWDRIVER - FLAT HEAD Square Shank Part Number Description SNIPS - METAL /GEN807SX RACHET OFFSET CUTTING Part Number Description /GEN808 4-WAY OFFSET /W9132 1/4 X 8 1/4 SCREWDRIVER /W9133 1/4 X 10 1/4 /R4-IN-1 RACHETING FOUR IN ONE /W9134 5/16 X 10 7/8 /16-IN-1 SIXTEEN IN ONE /W9135 3/8 X 13 1/2 Part Number Description /4-IN-1 FOUR IN ONE /W9136 3/8 X 15 1/2 /W9V007 7" STRAIGHT /W9137 3/8 X 17 1/2 /W9V010 10" STRAIGHT /W9174 5/16 X 10 7/8 /W9V012 12" STRAIGHT /W9V207 7" DUCKBILL /W9V210 10" DUCKBILL /W9V212 12" DUCKBILL 257 Part Number Description Hand Tools & Tweezers /W1130 15/16 /W1132 1 Accessories /W1134 1 1/16 /W1136 1 1/8 Squares /W1140 1 1/4 Part Number Description /GEN388 MINI MECHANICAL PICK-UP Wrench - Open /GEN407 TWEEZER 4" Part Number Description SOLDERING End /GEN300/1 6" STAINLESS STEEL /GEN425 TWEEZER RULE MAGNIFIER /GEN812 CARPENTERS /GENC421 6 PC.
Load more

Recommended publications
  • Pta and Hand Tools
    Precision, Quality, Innovation PTA AND HAND TOOLS Hole Saws Hacksaws Jig Saws Reciprocating Saws Portable Band Saws Measuring Tapes Utility Knives Levels Plumb Bobs Chalk Rules & Squares Calipers Protractors Punches Shop Tools Lubricant Catalog 71 PRECISION, QUALITY, iNNOVATiON For more than 135 years, manufacturers, builders and craftsmen worldwide have depended upon precision tools and saws from The L.S. Starrett Company to ensure the consistent quality of their work. They know that the Starrett name on a saw blade, hand tool or measuring tool ensures exceptional quality, innovative products and expert technical assistance. With strict quality control, state-of-the-art equipment and an ongoing commitment to producing superior tools, the thousands of products in today's Starrett line continue to be the most accurate, robust and durable tools available. This catalog features those tools most widely used on a jobsite or in a workshop environment. 2 hole saws Our new line includes the Fast Cut and Deep Cut bi-metal saws, and application-specific hole saws engineered specifically for certain materials, power tools and jobs. A full line of accessories, including Quick-Hitch™ arbors, pilot drills and protective cowls, enables you to optimise each job with safe, cost efficient solutions. 09 hacksaws Hacksaw Safe-Flex® and Grey-Flex® blades and frames, Redstripe® power hack blades, compass and PVC saws to assist you with all of your hand sawing needs. 31 jig saws Our Unified Shank® jig saws are developed for wood, metal and multi-purpose cutting. The Starrett bi-metal unique® saw technology provides our saws with 170% greater resistance to breakage, cut faster and last longer than other saws.
    [Show full text]
  • Woodwork Hand-Tools
    Woodwork hand-tools JSS 1 (2nd Term – Week 2) Woodwork hand-tools BORING TOOLS – In machining, boring is the process of enlarging a hole that has already been drilled (or cast), by means of a single-point cutting tool (or of a boring head containing several such tools). Boring is used to achieve greater accuracy of the diameter of a hole, and can be used to cut a tapered hole. Boring can be viewed as the internal-diameter counterpart to turning, which cuts external diameters. Boring tools are used to make holes in wooden materials. The wooden material is held firm with braces before the boring is done. Some examples of boring tools are wood brace, ratchet brace, bradawl, etc; some of the boring tools are discussed below. (I.) The Ratchet Brace: The Ratchet brace has four (4) parts which are: • The Head: The head is made of hardwood and shaped to fit the hand of the user. It is screwed to a steel sleeve. It fits over the crank rod and runs on the hardened steel balls. • The Crank: This is a rectangular bent metal rod. It fits into the hardwood or plastic handle. • The Chuck: The end of the crank is enlarged, threaded and slotted to receive the socket and jaws respectively. • The Ratchet: A ratchet is a tool fitted to the ratchet brace so that holes can be drilled (bored) at specific parts that are not really exposed, such as corners where it is impossible to make complete turn. CUTTING TOOLS – In the context of machining, a cutting tool or cutter is any tool that is used to remove material from the workpiece by means of shear deformation.
    [Show full text]
  • STANLEY® FATMAX® Tri-Material Hand Saws with Bladearmor® Coating
    STANLEY® FATMAX® TRI-MaterIAL HAND SAWS WITH BLADEARMOR® COatING ■ Tri-material handle for comfort and durability. SAW ■ New handle design improves ease of cut by 25%*. ■ Triple Ground Tooth Technology 4X** sharper for fast cuts. S ■ Induction hardened teeth for long life. ■ BladeArmor® coating helps reduce friction while cutting. Product # Blade Length (in) Points Per Inch Teeth Per Inch 20-046 15 12 11 20-047 20 12 11 FMHT20218 26 12 11 *Compared to previous model. **Compared to traditional tooth saws. STANLEY® FATMAX® BOX SAW ■ Blade is 15% thicker than conventional saws for straighter cuts with less binding. ■ SharpTooth™ Saw Technology uses three cutting surfaces to cut 50% faster than conventional STANLEY® hand saws. ■ Induction-hardened teeth stay sharp up to 5X longer than standard teeth. ■ Thick, ergonomically designed grip resists slipping and adds comfort. ■ Back of saw can be used to mark 45° and 90° angles. Product # Blade Length (in) Points Per Inch Teeth Per Inch 20-045 15 9 8 STANLEY® SHARPTOOTH® CUSHION GRIP SAWS ■ SharpTooth™ saw technology uses three cutting surfaces to cut 50% faster than conventional STANLEY® hand saws. ■ Induction-hardened teeth stay sharp up to 5X longer than standard teeth. ■ Ergonomically designed one-piece handle. Product # Blade Length (in) Points Per Inch Teeth Per Inch 20-526 15 12 11 20-527 20 12 11 STANLEY® Heavy-DUTY SHARPTOOTH® WOOD HANDLE SAWS ■ Aggressive multipurpose saw for fast cutting. ■ SharpTooth™ Saw Technology uses three cutting surfaces to cut 50% faster than conventional STANLEY® hand saws. ■ Induction-hardened teeth stay sharp up to 5X longer than standard teeth.
    [Show full text]
  • Ln //-----~-----__M---)~ 02-0&31 Hunting Knife
    ADDISON BUILDING MATERIAL CO. INC., • 3201 S. Busse Rd., Arlington Heights, IL 60005 Order Department (847) 437-1288· Main (847) 437-1205 • FAX (847) 437-4183 91 Ka.-ba~ SKU NO. 700910 02-G603 3-5116" III Standard Barlow knife, clip and pen blades. SKU NO. 701010 02-0644 4" Stock knife; clip, coping and spey blades. SKU NO. 700920 02-0&05 3-3116" Serpentine Jackknife, clip and pen blades. I=--- SKU NO. ~_ ~-~701015 02-1l646 Closed size 3-15/16", open size 7-1/8", dark brown handle. SKU NO. 700t35 02-0&19 3-11N6" Camping knife; spear, can opener, screwdriver/ SKU NO. bottle opener, punch blades with shackle. 701037 02-0647 Closed size 3", open size 5-1/2", dark brown handle. SKU NO. 700950 02-0&29 5" Daddy Barlow, clip blade. SKU NO. c~~701039 02-0648 Closed size 4", ~ ....-...'\!t:!~~ open size 7-1/8", maroon handle. Ln_//-----~-----__m---)~ 02-0&31 Hunting knife. Bowie style, 6'" blade with sheath. Stainless steel blade, genuine hardwood handle. SKU NO. 700985 SKU NO. 70104302·1013 3%W BARLOW - Clip and pen blades. ~ SKU NO. 700195 02-0&35 3-3116" Pearlized Jackknife. Clip and pen blades. SKU NO. 701049 02-1026 3w JACK KNIFE - Clip and pen blades. SKU NO. 701000 02-0&37 2-518" Penknife. Clip and pen blades. RENTAL' BUILDING MATERIALS' HAND TOOLS· POWER TOOLS· HARDWARE· FASTENERS· PAINT· ELECTRICAL' PLUMBING· LAWN & GARDEN· JANITORIAL ADDISON BUILDING MATERIAL CO. INC., • 3201 S. Busse Rd., Arlington Heights, IL 60005 92 Order Department (847) 437-1288· Main (847) 437-1205· FAX (847) 437-4183 02-1342 43~" SHEATH - Brown Oil Finished Leather Sheath with stitched belt loop on back.
    [Show full text]
  • Stanley Hand Tools Catalog
    SAW SELECTION GUIDE MATERIALS APPLICATIONS WOOD METAL PLASTIC ROOFING FRAMING DRYWALL FINISH WORK HANDLE TYPE BLADE LENGTH Saws WOOD FLOORING POINTS PER INCH CROWN MOLDING PANEL SAWS FatMax® Saw w/ BladeArmor™ Coating 20-046, 20-047 15" & 20" 9 Wood/ Rubber X X X X FatMax® Saw 20-045 15" 9 Wood/ Rubber X X X X Fine Finish Saw w/Rubber Grip 20-526, 20-527 15" & 20" 12 Rubber/ Plastic X X X X X Heavy Duty Saw 15-085, 15-087 15" & 20" 9 Wood X X X X Fine Finish Saw 15-086, 15-088, 20-065 15", 20", & 26" 12 Wood X X X X X Heavy Duty Saw - Resharpenable 15-334, 15-335 15" & 20" 9 Wood X X X X General Purpose Saw 15-579, 15-580 15" & 20" 9 Plastic X X X X SPECIALTY SAWS Drywall Saw 15-025 15" 9 Wood X X X X Compact Fine Finish Saw 20-221 10" 12 Wood X X X X X Compass Saw 15-100 12" 8 Wood X X Compass Saw w/Plastic Handle 15-351 12" 8 Plastic X X Reversing Backsaw 15-252 10" 15 Wood X X Miter Box Saw 15-673 14" 12 Wood X X X X Miter Box Saw w/Plastic Handle 15-509 12" 13 Plastic X X X X MultiPurpose Saw - 3 in 1 20-092 6", 8", & 10" 10, 12, & 24 High Strength Nylon X X X X X X X MultiPurpose Saw - Nest of Saws 15-090 6", 8", & 10" 24, 10, & 12 Plastic X X X X X X X Folding Pocket Saw 15-333 8" 10 Plastic X X MultiPurpose Saw - 4-Way™ 15-275 6" N/A Metal X X X X X Flush Cut Pull Saw 20-331 4-3/4" 23 Plastic X X X JAB SAWS FatMax® Drywall Saw 20-556 6" 9 Rubber X X Drywall Saw w/Cushion Grip 15-556 6" 7 Plastic X X Drywall Saw 15-206 6" 7 Wood X X MultiPurpose Saw - Cushion Grip 20-220 N/A N/A Plastic X X HACKSAWS FatMax® High Tension Hacksaw
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Specialty Tools Brake Tools
    Specialty Tools SPECIALTY TOOLS • Includes sizes T-40, T-45, T-50. • All Torxbits are made of heat-treated alloy steel. 27740 - 3 pc. set includes T-40, T-45, T-50 sizes BRAKE TOOLS for servicing disc brakes fitting GM and Ford brake caliper Torx bolts. • 3-Stone Hone Fits Cylinders to 2" (21.4-50.8mm). • Available Individually: 26620 T-40 3/8" drive, 26630 T-45 3/8" drive, 26640 T-50 3/8" drive • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in Lisle Brake Caliper Torx Bit Set LST 27740 step-cut and blind-end cylinders. 240 grit stones are 1 1/8" long. Flexible driver. • # 10050 Replacement Stones • Hardened alloy steel bits. Lisle Brake Cylinder Hone LST 10000 • Professional sand finish. • Sizes: T40, T45 & T50. Performance Tool 3 Pc Brake Caliper Star Bit Set • 2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm). WIL W1337 • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in step-cut and blind-end cylinders. 240 grit stones are • Hangs the Disc Brake Caliper Out of the Way During Service While 1-1/8" long. Flexible driver. Keeping Tension Off the Brake Line. • # 10550 Replacement Stones • Helps prevent damage to calipers and lines when servicing brakes, Lisle Brake Cylinder Hone LST 10500 suspension, hubs and more. • Overall length of 9" for hanging the disc brake caliper out of the way while keeping tension off the brake line.
    [Show full text]
  • Great American Furniture
    Great american FURNITUREFROM THE EDITORS OF MAGAZINE JULY 2003 SHAKER Classic Candlestand ▼ 6 The Shakers referred to the leg design as “spider feet.” Surprisingly, this traditional form is not that complicated. Press Cupboard ▼ 12 This fine case piece showcases both your collection and craftsmanship. Oohs and ahhs guaranteed. Hand-tool Stepstool ▼ 19 Become a Neanderthal, if only for one project. This attractive yet highly useful stool offers step-by-step hand-tool instruction. 18TH CENTURY 62 Simple Candle Boxes ▼ 24 6 Beginning woodworkers will love this fast, classic project. Butler Tray Table ▼ 28 A Chippendale table, complete with a removable tray top, is just what you need for serving tea and coffee to guests. 12 ▼ Pennsylvania Spice Box 36 An instant heirloom: This beautiful 18th century spice box doubles as the perfect jewelry box for you or your loved one. ARTS & CRAFTS Greene & Greene Side Table ▼ 43 Grace the end of your sofa or chairs with class and style. 28 ▼ Slant-arm Morris Chair 48 Build an Arts & Crafts icon that instantly will become the most sought-after chair in your home. CONTEMPORARY 48 Nicolai Fechin-style Bench ▼ 58 Always wanted to try carving? Here’s your chance. The detail is meant to look rustic and simple so mistakes won’t matter. Plywood Nesting Tables ▼ 66 Sleek and versatile (one table or three), this project is a great lesson in making perfect miter joints. 66 Rice-paper Maple Lamp ▼ 70 Build a simple lamp based on designs typical in a Japanese household that will look great in any modern home.
    [Show full text]
  • Pliers, Clamping, & Cutting
    PLIERS, CLAMPING, & CUTTING TABLE OF CONTENTS XL SERIES PLIERS . 742-743 LOCK JOINT PLIERS . .744 POWER-TRACK® II PLIERS . .745 ASSORTED PLIERS SETS . .746 NEEDLE-NOSE PLIERS . 747-748 CUTTING PLIERS . 749-752. LINEMAN'S PLIERS . 752-753. SPECIALTY PLIERS. 754 MINIATURE PLIERS . 755. LOCKING PLIERS . 756-762. LOCKING C-CLAMPS . 762-765 SAFETY WIRE TWISTERS. 766 WIRE STRIPPERS & CUTTERS . .767 AUTOMOTIVE PLIERS . 768-769. RETAINING RING PLIERS SETS . 770-772 RETAINING RING PLIERS . 773-774 1000V PLIERS . 775-781. HACKSAW . 782. C-CLAMPS . 782-784 EYE BOLTS . 785. SNIPS . 785-787 . MULTI-PURPOSE TOOLS . .787 KNIVES. 788 PROTO® STAINLESS STEEL ELECTRICIAN'S SCISSORS A handy electrician's tool that can accomplish common tasks like stripping, crimping, cutting, and snipping from thin delicate wires to thicker multi-core cables, conveniently locked on the belt until needed. Ergonomic handles with hole for tethering. Built-in wire stripper can strip and crimp for AWG 12, 14 and 16 cables. Stainless steel construction. Includes a holder with a quick release button and a belt clip. Cuts multi- wire cables and snips tiny wires. Micro anti-slip teeth on blades for better cutting grip. SAFETY WIRE PLIERS Safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration and other forces. The presence of safety wiring also serves to indicate that the fasteners have been properly tightened. Safety wire is available in a variety of gauges and materials, depending on the application. In aircraft and racing applications, stainless steel wire is used, most commonly in .032" diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored to a second fastener or part, then twisted again.
    [Show full text]
  • IRWIN Industrial Tools
    LockingLocking ToolsTools The Professionals Choice Since 1924 The VISE-GRIP® Locking Tool was invented in 1924 by a blacksmith in the small town of DeWitt, Nebraska. Eight decades and more than a half-billion tools later, IRWIN® VISE-GRIP continues to be handcrafted in the U.S.A with the same quality and dependability that trade professionals have trusted and preferred since the beginning. Our expertise in design and manufacturing produces locking tools with more than twice the life and signifi cantly more strength than other tools on the market. And to further meet the needs of professional tool users, IRWIN VISE-GRIP is now available in three handle confi gurations: The Original™, ProTouch™ and Fast Release™. A Perfect Grip for Any Job The Original IRWIN VISE-GRIP Locking Tools provide powerful locking force using the classic triggered design. The Original® Locking Tools 10 pc. Set with Kitbag 10R®, 10WR®, 7R®, 7WR®, 7LW®, 5WR®, 6LN®, 9LN®, 6R®, 11R® #1078KB IRWIN VISE-GRIP ProTouch Locking Tools provide a cushioned handle and rugged grip for all of your toughest jobs. The cushioned grip reduces vibration, hand fatigue and helps prevent slipping - even for greasy, oily hands. www.irwin.com Locking Tools Introducing the new IRWIN® VISE-GRIP® Fast Release™ Locking Tool. It offers the strength and durability of The Original™ with the performance advantage of a release that is 2x easier to open. It unlocks from any angle without needing to press a trigger, making it ideal for professionals who work in tight spaces. The Fast Release locking tool also offers more fi nger room to accommodate large hands and professionals who wear gloves.
    [Show full text]
  • Materials Technology (Wood) Ordinary Level Section a (40 Marks)
    2010. S53A Coimisiún na Scrúduithe Stáit State Examinations Commission Junior Certificate Examination 2010 Materials Technology (Wood) Ordinary Level Section A (40 Marks) Monday 21 June Afternoon, 2.00 to 4.00 Centre Number Instructions (a) Answer any sixteen questions. (b) All questions carry equal marks. (c) Answer the questions in the spaces provided. (d) This booklet must be handed up at the end of the examination. Section A. (e) Write your examination number in the box provided 1. and on all other pages used. 2. 3. 4(a) or (b). Examination Number: 5. Total. Page 1 of 12 SECTION A - 40 MARKS Answer any 16 questions from this section. All questions carry equal marks. 1. From the list given, identify the nails shown. Round Wire Nail Staple A B Clout Head Nail Corrugated Fastener Panel Pin NAIL A NAIL B 2. Name the tool labelled A in the diagram and give its use. NAME USE A OR Name the tool labelled B in the diagram and give its use. NAME USE B 3. Name the grain feature shown at A. A Page 2 of 12 4. Name the fitting shown and give its correct use. NAME USE 5. State from which trees in the list these seeds come. Pine A Oak B Sycamore Ash Holly TREE A TREE B 6. Name the power tool shown in the diagram. NAME 7. List two safety precautions that should be observed when carrying a chisel across a room. 1. 2. Page 3 of 12 8. How could a plane blade get damaged as shown in the sketch? ANSWER 9.
    [Show full text]
  • Instructions For
    INSTRUCTIONS FOR: WORKING TERMINOLOGY: Figure 1 REAR HANDLE FRONT MOTOR HANDLE CAUTION! HOUSING SPINDLE LOCK BUTTON SWITCH DUST KEEP CONTROL HANDS AWAY! BLADE HEIGHT EXPOSED WHILE nkSafe ADJUSTMENT CUTTING hi ty THREE-ARM T • W • KNOB n DEPTH e o HEIGHT LOCKING a i GAUGE CRAIN t WING SCREW r c E e ye ot DEPTH GAUGE BLADE Pr ADJUSTMENT REFERENCE DEPTH GAUGE GUARD SCALE LINES THREE-ARM KNOB No. 835 Heavy-Duty Undercut Saw WARNINGS: • IN USE, KEEP ONE HAND ON THE FRONT HANDLE AND ONE HAND ON THE REAR HANDLE. DON’T REMOVE A HAND TO CLEAR DEBRIS. • SWITCH OFF AND UNPLUG SAW BEFORE MAKING ANY ADJUSTMENTS, BLADE CHANGE OR REPAIRS. BLADE MUST BE STOPPED. KICKBACK HAZARDS: • THE SAW PLUNGE-STARTS. PLUNGE SLOWLY BEFORE PUSHING FOR- WARD! • KEEP RPMs HIGH. DON’T FORCE THE SAW, ESPECIALLY WHEN NAILS MAY BE PRESENT. • HEIGHT ADJUSTMENT: KEEP THE BLADE HOUSING FLAT ON LEVEL FLOORS, AND KEEP BLADE PARALLEL TO THE FLOOR AT ALL TIMES. • ALWAYS PUSH THE SAW AGAINST THE BLADE ROTATION. NEVER PULL THE SAW TOWARDS YOURSELF OR CUT IN REVERSE. SAFE OPERATING POSITION: KEEP KNEES AND OTHER BODY PARTS OUT OF KICK BACK ARC. KNEEL TO THE SIDE! DO NOT USE STANDING UP! CUTTING DIRECTION SAFETY FIRST This saw is designed for undercutting affixed wooden door jambs, moldings, base, and masonry, tile and stone walls to fit new flooring underneath. Do not use this saw for sanding floors, cutting metal, or any purpose not described in this manual. HANDLES: In use, keep both hands on the handles at all times.
    [Show full text]