DOCSLIB.ORG

Recycling Plastics Is As Easy As 1, 2, 3, (4, 5, 6, 7)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Recycling Plastics Is As Easy As 1, 2, 3, (4, 5, 6, 7) RECYCLING PLASTICS IS HDPE can be recycled into flower pots, PS can be recycled into plastic lumber, trash cans, traffic barrier cones, cassette tape boxes, flower pots... AS EASY AS ... detergent bottles... 1 , 2, 3 (4, 5, 6, 7)! OTHER V (Polyvinyl chloride) This is usually a mixture of various The numbers shown PVC is used in shampoo bottles, cooking oil plastics, like squeeze ketchup bottles, inside the chasing bottles, fast food service items... "microwaveable" dishes... arrows refer to different types of PVC can be recycled into drainage and Other (number 7) is usually not recycled plastics used in making irrigation pipes... because it is a mixture of different types plastic products and of plastics. containers. LDPE (Low density polyethylene) How Plastics Are Made... The numbering system is based on a LDPE is found in grocery bags, bread bags, voluntary plastic guide developed by the shrink wrap, margarine tub tops... There are two methods for making plastic Society of The Plastics Industry (SPI). containers, blow-molding and injection Presently, SPI is working to improve the LDPE can be recycled into new grocery molding. Blow-molding produces necked numbering system to make it easier for bags... bottles (shampoo bottles) while injection you to know what to recycle. molding produces tubs (margarine tubs). PP (Polypropylene) What Do The Numbers Mean? Your recycling program may be based on PP is used in most yogurt containers, the number system or on how the plastic PET (Polyethylene terephthalate) straws, pancake syrup bottles, bottle was made. Check with your local recycling caps.... coordinator to find out which types of PET is used in the production of soft drink plastics are recyclable in your community. bottles, peanut butter jars... PP can be recycled into plastic lumber, car Please be sure to recycle only those battery cases, manhole steps... plastics collected in your recycling PET can be recycled into fiberfill for program! Most recycling programs sleeping bags, carpet fibers, rope, PS (Polystyrene) accept only numbers 1 & 2 with necks! pillows... PS is found in disposable hot cups, HDPE (High density polyethylene) packaging materials (peanuts), and meat trays... HDPE is found in milk jugs, butter tubs, detergent bottles, motor oil bottles... Not all plastic consumer goods are Remember... New York State Department identified by code numbers. Some plastic Look for plastic containers that can be of Environmental Conservation products simply do not fit into the recycled in your communities recycling numbering system that identifies plastics program. Call your local recycling used in consumer containers. There are coordinator for more information. If you actually thousands of different varieties can’t find your local recycling coordinator’s of plastic resins or mixtures of resins that number, contact us. RECYCLING are developed to suit the needs of particular products. Write or call us: NYS Department of Environmental PLASTICS IS Conservation Gee Wiz Plastic Facts Division of Solid & Hazardous Materials AS Bureau of Solid Waste Reduction & - All plastic starts out as petroleum! Recycling - Five PET bottles yield enough fiber for 625 Broadway one extra-large T-shirt or one square foot Albany, New York 12233-7253 of carpet. About 1,200 soda bottles could (518) 402-8704 carpet the average living room. (Half of all polyester carpet manufactured in the or email us at: United States is made from recycled [email protected] plastic bottles.) - Twenty-five two-liter bottles can make and check out our web page at: one sweater. www.dec.ny.gov - Five two-liter PET bottles yield enough EASY AS ... fiberfill for a ski jacket. - It takes 35 two-liter PET bottles to Send us your ideas and suggestions, 1, 2, 3, make enough fiberfill for a sleeping bag. we would like to hear from you! - Plastic makes up eight percent of our trash by weight, but is 24 percent of the (4, 5, 6, 7) volume. - Plastic bottles will take over 500 years to decompose. Printed on 100% post-consumer recycled paper.
Load more

Recommended publications
  • Shrink Wrap Packaging
    Shrink Wrap Packaging Versatile Shrink Wrap Solutions pacmachinery.com Shrink Packaging Basics Shrink packaging encapsulates a product with- in a tightly adhering layer of film. The process may Clamco 6800CS Side Sealer be accomplished by hand, or by using automatic or Intermittent motion, automatic side seal shrink wrapper semi-automatic packaging equipment. Creating a that offers exceptional return on investment. strong seal in the film is the first step. To achieve this, a hot knife or hot wire is pressed against the film to weld the seal together. The seal process has three variables: time, temperature, and pressure. Each may be adjusted to suit different film types. Once sealed in a film envelope, the package is passed through a heated shrink tunnel. When heated, the film softens and expands, and as the film cools it shrinks tight. The package exits the tunnel wrapped in a taught, secure, attractive film. There are several films from which you may Clamco 6700GLX Automatic L-Bar Sealer choose. Polyethylene is often used for bulk packaging; Outstanding speed, throughput and performance. Sealer Polyolefin is common in retail applications where allows for fast setup, alignment, and product transfer. crystal clarity is important. Polyvinyl Chloride (PVC) can be used as a pre-formed sleeve that is placed around a package and shrinks to conform. Ideal for bundling multiple parts in one secure package, shrink wrapping enhances visual appeal, maintains quality, and protects against tampering. Specifications 6700GLX 6800CS Speed (up to) 40 pkg/min 70 pkg/min Seal length (side) 18” 19.75” Seal length (front) 23” unlimited Maximum film width 23” 23.5” Maximum product height 7.5” 7.85” Sleve Wrappers Automatic Shrink Systems 7002ASW Automatic Sleeve Wrapper With ever-increasing production demands, Clamco This versatile automatic, sleeve wrapper-bundler can be used for meets the need with a family of automatic, high-speed, wrapping a wide range of products, from trays to cartons or bottles.
    [Show full text]
  • Types of Plastic and Their Recycle Codes | Quality Logo Products®
    7/24/2018 Types of Plastic and Their Recycle Codes | Quality Logo Products® Product Search Your privacy will be protected by redirecting your search to Search Encrypt. Learn More X ALL ABOUT MATERIALS Types of Plastic and Their Recycle Codes Other Lessons in This Course Types of Plastic Plastic is an essential component of many items, including water bottles, combs, and beverage containers. Knowing the difference, as well as the SPI codes, will help you make more informed decisions about recycling. The seven types of plastic include: Polyethylene Terephthalate (PETE or PET) High-Density Polyethylene (HDPE) Polyvinyl Chloride (PVC) Miscellaneous plastics (includes: polycarbonate, polylactide, acrylic, acrylonitrile butadiene, styrene, fiberglass, and nylon) When it comes to promotional giveaways, and even items we use around the house, there is no material more important than plastic. The same can be said for the items we use at the office. Most of our supplies contain at least a little bit of this material. In fact, humans have thus far produced 9.1 billion tons of plastic! For the sake of the environment, it’s important to know the different types of plastic and their uses, as well as the resin identification codes found on each for the sake of recycling. Recycling Codes for Plastic Understanding the different types of plastic can help consumers like you make more informed decisions related to your health and the environment. It’s important to become familiar with an item’s SPI (Society of the Plastics Industry) code, which is also known as a resin identification number and is used to classify the different types of plastic.
    [Show full text]
  • The Benchmark for Banknote Packaging in the High-Speed World
    NotaPack®10 The Benchmark for Banknote Packaging in the High-Speed World www.gi-de.com/notapack10 2 NotaPack® 10 3 Concentrated packaging power NotaPack 10 is the leading banknote PHENOMENAL SECURITY MODULAR, COMPACT, FLEXIBLE FULLY AUTOMATIC – INCREASED PRODUCTIVITY – packaging system worldwide for cash Three main factors drive a high level With a high level of product modularity FULLY INTEGRATED INCREASED EFFICIENCY of security: First, intelligent features and optimum flexibility as a result of The G+D High-Speed World is character- NotaPack 10 packages up to 10 bundles centers and banknote printing works, that safeguard the unpackaged bank- over 30 different modules, NotaPack 10 ized by the perfect integration of every of 500 or 1,000 banknotes per minute – engineered in particular for the de- note bundle right up until it is fully can fulfill all key customer requirements. single element, so it is no surprise that quickly, reliably, and to a consistently manding requirements of the industry. shrink-wrapped. These include optical It also offers integration of up to five NotaPack 10 is designed for perfect high level of quality. The system’s energy It is the flawless packaging solution bundle inspection and advanced access BPS systems, and an extremely compact alignment and compatibility with BPS consumption is very low in comparison protection facilitated by continuous design that is suitable for very confined systems and G+D software. Thus, the to other systems. These considerations for the BPS M3, M5, M7, and X9 conveyor covers with locks and log file spaces (taking up floor space of just ideally alligned end-to-end process make the NotaPack 10 a highly efficient, High-Speed Systems, simultaneously writing (p.
    [Show full text]
  • Shrink Wrap Outer Packaging
    GREEN FEATURES Fact Sheet Shrink Wrap Outer Packaging Introduction interference, our manufacturing Life Technologies is committed facility in Warrington, UK, has been to designing products with the shrink wrapping our kits (Figure 1). environment in mind—it’s one more step toward a smaller footprint. By This shrink wrap consists of linear removing the polyolefin shrink wrap low density polyethylene (LLDPE). Green Benefits from some of our products, we can This practice used 950 kg of LLDPE • Less use of non-renewable resources eliminate the material consumption shrink wrap film annually. Due to • Less waste disposal associated with the manufacture of the limited disposal alternatives this plastic and reduce the amount available for this particular material, of waste going to landfills and we presume most, if not all, of this incinerators. This fact sheet provides shrink wrap is scrapped as waste the documentation behind these and not recycled. To minimize the environmental claims. environmental impact of the film, we have replaced it with a small tamper- Product Description proof seal (Figure 2) that fits over the To help ensure products arrive kit container closure tab and can be intact and without any unintended recycled with the kit box. Figure 1. Before: packaged in shrink wrap Figure 2. After: packaged with a simple tamper-proof seal Green Features Reduced Consumption of Non-renewable Resources Based on Lifecycle Inventory (LCI) Data from Plastics Europe’s Eco-profile programme1,2, we estimate that by eliminating the use of 950 kg
    [Show full text]
  • Recyclability in a View
    Recyclability in a View Make the most informed labelling and packaging decision for greater sustainability. Here is an overview of different labelling technologies, the recyclability of various packaging materials, and the global trend in plastic packaging to help you make the right choice. Avery Dennison ClearIntent™ portfolio contains hundreds of products that help reduce material consumption and landfill waste. Benefits of PS labels versus other labelling technologies + No backing liner waste + Easiest separation due to small adhesion zone − Limited material options, lower quality look & feel − Hotmelt contaminant Wrap-around + No backing liner waste + Perforations can be added to provide manual sorting + Container lightweighting / recycled content color Pressure Sensitive variation Labels − 360 coverage impacts optical sorting process − Traditional PETG and PVC sleeves do not separate + CleanFlake™ solution enhances the Shrink Sleeve through PET recycling process (sink / float) recyclability of PET containers by enabling a clean separation duing + No backing liner waste the recycling process − Limited to paper face - can disintegrate and contaminate recycling wash water + Materials from renewable resources − Not proven through plastic recycling process available for facestocks and liners (only glass) Wet Glue + Bio-sourced, compostable, biodegradable materials readily + No backing liner waste available + Single polymer plastic makes recycling easier (container and label are PP) + Liner and matrix recycling programs − Limited availability
    [Show full text]
  • Environmental Impact of Materials in Parks
    Material Choices in Public Playground Development Great Lakes Park Training Institute Tim Madeley, Presenter February 21, 2007 Playground Material Choices Overview •CCA Treated Wood •Recycled Plastic Lumber •Polyvinyl Chloride (PVC) Green Playgrounds CCA wood treatment CCA Treated Wood Green Playgrounds CCA wood treatment CCA = Chromated Copper Arsenate •Chromium 66% •Copper 18% •Arsenate 16% •Applied with pressure treatment process Green Playgrounds CCA wood treatment • CCA wood treatment has been in use since the 1930’s • Majority of treated wood since 1970’s contained CCA • CCA is a registered chemical pesticide Green Playgrounds CCA wood treatment • Growing concern about the possibilit y of arseni c exposure • AiArsenic exposure over time can lead to lung or bladder cancer • In addition to treated wood, CCA exposure occurs naturally in food, air and soil around us all Green Playgrounds CCA wood treatment Actual impact to children is based on several factors: • numbfdthlber of days they play on the CCA treated playgrounds each year • number of years they play on the CCA treated playground • amount of arsenic picked up on their hands while they play • amount of arsenic they ingest from their hands during play Green Playgrounds CCA wood treatment • In June 2001, the Consumer Product Safety Commission (CPSC) was petitioned to ban CCA from use on playground equipment • CCA ppyroducers reached a voluntary agreement with the EPA to end the manufacture of CCA for non- industrial uses by December 31, 2003 Green Playgrounds CCA wood treatment
    [Show full text]
  • Operating, Field Maintenance, and Parts Manual Model 998 Metric CE Thank You for Choosing Shrinkfast Products
    Operating, Field Maintenance, and Parts Manual Model 998 Metric CE Thank you for choosing Shrinkfast products. Please visit us on the web at www.shrinkfast998.com for our latest product information and updates. Customer Service Issues: Before returning any Shrinkfast product, please call: (603)863-7719 Email at www.shrinkfasttools.com SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS GENERAL SAFETY PRECAUTIONS & CE SAFETY CERTIFICATION .....................pages 2-4 REGULATOR OPERATION & MAINTENANCE ............................................................ pages 5-8 STARTING THE HEAT TOOL ............................................................................................ page 8 REGULATOR MAINTENANCE & SAFETY FEATURES ......................................... pages 9-10 EXCESS FLOW DEVICE .................................................................................................... page 9 CHOOSING THE CORRECT PROPANE TANK ....................................................... pages 11-12 TANK PRESSURE, TEMPERATURE & OPERATION ............................................ pages 13-14 VENTILATION REQUIREMENTS .................................................................................. page 15 GENERAL INFORMATION ON SHRINK FILM & SHRINK BAGS ...................... pages 16-17 SHRINK WRAPPING TECHNIQUES (PALLET BAGS & ODD SHAPED OBJECTS)........ pages 18-22 PRINCIPLES OF OPERATION .................................................................................. pages 23-25 OPERATING OVERVIEW ..........................................................................................
    [Show full text]
  • Guide to Plastic Lumber Brenda Platt, Tom Lent and Bill Walsh
    hhealbthy bnuilding network JUNE 2005 The Healthy Building Network’s Guide to Plastic Lumber Brenda Platt, Tom Lent and Bill Walsh A report by The Healthy Building Network. A project of the Institute for Local Self-Reliance 927 15th Street, NW, 4th Fl. — Washington, DC 20005 — www.healthybuilding.net About the Institute for Local Self-Reliance Since 1974, the Institute for Local Self-Reliance (ILSR) has advised citizens, activists, policymakers, and entrepreneurs on how to design and implement state-of-the-art recycling technologies, policies, and programs with a view to strengthening local economies. ILSR’s mission is to provide the conceptual framework, strategies, and information to aid the creation of ecologically sound and economically equitable communities. About the Healthy Building Network A project of ILSR since 2000, the Healthy Building Network (HBN) is a network of national and grassroots organizations dedicated to achieving environmental health and justice goals by transforming the building materials market in order to decrease health impacts to occupants in the built environment – home, school and workplace – while achieving global environmental preservation. HBN’s mission is to shift strategic markets in the building and construction industry away from what we call worst in class building materials, and towards healthier, commercially available alternatives that are competitively priced and equal or superior in performance. Healthy Building Network Institute for Local Self-Reliance 927 15th Street, NW, 4th Floor Washington, DC 20005 phone (202) 898-1610 fax (202) 898-1612 general inquiries, e-mail: [email protected] plastic lumber inquiries, e-mail: [email protected] www.healthybuilding.net Copyright © June 2005 by the Healthy Building Network.
    [Show full text]
  • North American Recycled Plastic Processing Capacity Increases Published January 17, 2020
    NERC‐NEWMOA REGIONAL RECYCLING MARKETS COMMITTEE North American Recycled Plastic Processing Capacity Increases Published January 17, 2020 INTRODUCTION The following is a list of increases in North American capacity to process recyclable plastics into products such as plastic lumber, pellets or resins for end‐markets. These increases were announced or completed in 2017 or later. The list covers facilities that have been publicly identified in either the trade or local press. Details of these new plastic processing facilities tend to have less information than similar announcements of expanded recycled end‐market capacity in the paper industry. For instance, announcements of projected opening dates have not, in many cases, been accompanied by press releases or news stories confirming the opening. In addition, few of the facilities are taking mixed plastics. Instead, they are relying on MRFs or other processors to do the initial resin sorting. Each facility listing includes: Name and whether new or expanded facility location projected processing capacity (input) and/or production capacity (output) in tons per year (TPY) 1 product projected opening date This list will be updated as new capacity is announced or new information received. If you have information about capacity expansions not listed here or corrections to the information on this list, please contact Chaz Miller, Chair, NERC‐NEWMOA Regional Recycling Markets Committee, [email protected], 301‐346‐6507. List of acronyms ABS = acrylonitrile butadiene styrene PET = polyethylene terephthalate EPS = expanded polystyrene PP = polypropylene HDPE = high density polyethylene PVC = poly vinyl chloride LDPE = low density polyethylene RPET = recycled PET LLDPE = linear low‐density polyethylene TPM = tons per month PC = polycarbonate TPY = tons per year 1 Some facilities reported in metric tonnes per year.
    [Show full text]
  • Why Can't All Plastics Be Recycled?
    Why can’t all plastics be recycled? Plastic has become prevalent because it is inexpensive and it can be engineered with a wide range of properties. Plastics are strong but lightweight, somewhat resistant to being degraded by chemicals, sunlight, and bacteria, and are thermally and electrically insulating. What does the symbol mean? A chasing arrows symbol, or resin code, does not mean that a plastic container is recyclable. Most plastic containers are marked with the chasing arrows symbol ‐ number one through seven in the center. The number inside the arrows signifies the main chemical compound used to make that plastic container. Unfortunately, the symbol does not mean that plastic container can be recycled. There are seven resin codes used inside the chasing arrow symbols: 1. PETE Polyethylene Terephthalate is in pop and water bottles. Please recycle. 2. HDPE High Density Polyethylene is opaque and usually in bottles that store laundry detergent and milk. These are usually recyclable. 3. V Polyvinyl Chloride (PVC) is found in plastic pipes, shrink wrap. 4. LDPE Low Density Polyethylene is in produce bags, plastic wrap, and plastic bags. 5. PP Polypropylene is used for yogurt tubs, ketchup bottles. 6. PS Polystyrene is found in Styrofoam, used for egg crates. 7. Other This category covers a vast mixture of resins and includes food containers (clam shells), polycarbonate used in sport bottles, and bio‐based plastic used in compostable food containers. Why don’t we recycle all these plastics? Most cities collect #1 and #2 types of plastic, or the plastic bottles made from PETE/PET and HDPE resin.
    [Show full text]
  • Supplier Packaging Guidelines Hyster-Yale Group
    Page 1 of 26 Supplier Packaging Guidelines For Locations in North America Hyster-Yale Group Revision 2 October 21, 2016 This is a controlled document with the electronic read-only domain, accessed from the HYG Master Index. Any person in possession of a printed copy of this parent document, or cited appendices, has an uncontrolled copy and should refer to the Master Index or approved web site for revision level status. ©Hyster-Yale Group, Incorporated. All rights reserved. DCN 36243 Rev. 2 Effective Date: 21 October 2016 HYG Supplier Packaging Guidelines Page 2 of 26 Table of Contents 1 INTRODUCTION ............................................................................................................................ 4 1.1 SCOPE .................................................................................................................................... 4 1.2 PURPOSE ............................................................................................................................... 4 2 ACCEPTABLE PACKAGING ............................................................................................................. 4 2.1 EXPENDABLE PACKAGING ...................................................................................................... 4 2.1.1 BAGS ............................................................................................................................... 4 2.1.2 CORRUGATED CARTONS ................................................................................................. 5 2.1.2.1
    [Show full text]
  • Recycled Plastic Lumber (RPL) Products Have Proven to Be Effective Alternatives for Many Applications, Offering High Durability and Requiring Little Maintenance
    Recycled Plastic Lumber A Strategic Assessment of its Production, Use and Future Prospects A study sponsored by: the Environment and Plastics Industry Council (EPIC) and Corporations Supporting Recycling (CSR) January 2003 This report was prepared by David Climenhage, under contract, for the Environment & Plastics Industry Council (EPIC) a council of the Canadian Plastics Industry Association (CPIA), and Corporations Supporting Recycling (CSR). The sponsors can be reached at Environment & Plastics Industry Council (EPIC) 5925 Airport Road, Suite 500, Mississauga, Ontario L4V 1W1 Telephone: 905-678-7748 Website: <www.plastics.ca/epic> Corporations Supporting Recycling (CSR) 26 Wellington Street East, Suite 501, Toronto, Ontario M5E 1S2 Telephone: 416-594-3456 Website: <www.csr.org> Although EPIC and CSR have endeavoured to provide accurate and reliable information to the best of their ability, the sponsors cannot be held liable for any loss or damage resulting from the interpretation or application of this information. This information is intended as a guide for use at your discretion and risk. EPIC or CSR cannot guarantee favourable results and assumes no liability in connection with its use. The contents of this publication, in whole or in part, may not be reproduced or transmitted in any form or by any means without the written permission of the publisher. ii Abstract During the 1990s, a number of technologies emerged to utilize recycled plastics in products designed to replace dimensional wood lumber. Since that time, recycled plastic lumber (RPL) products have proven to be effective alternatives for many applications, offering high durability and requiring little maintenance. Plastic lumber products are resilient, weather-resistant, and impervious to rot, mildew, and termites.
    [Show full text]